DLINKSW-AAA-AUTH-MIB
The DLINKSW-AAA-AUTH-MIB enables monitoring and management of authentication parameters and session states for D-Link switches utilizing RADIUS or TACACS+ AAA protocols. It exposes specific objects to track active authentication sessions, protocol interaction status, and authentication failure counters for network access control enforcement.
Imported Objects
Objects
22 total| Object Name |
|---|
dlinkSwAaaAuthenticationMIBThis MIB module defines objects for authentication feature which is based on Authentication, Authorization, Accounting (AAA) protocols. MODULE-IDENTITY .1.3.6.1.4.1.171.14.150.1.4 |
dAaaAuthMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.150.1.4.0 |
dAaaAuthMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.150.1.4.1 |
dAaaAuthGenericMethodTableThis table contains entries for AAA authentication methods configured for Login/enable/dot1x/MAC authentication/web/jwac. The following table describes the examples. Type Method List Name Priority Method ----- ------------------ -------- ------------ login default 1 radius login default 2 auth_rad login default 3 tacacs+ login default 4 none login ssh_login 1 radius login ssh_login 2 none login tel_login 1 tacacs+ enable default 1 radius enable default 2 tacacs+ dot1x default 1 radius dot1x default 2 local macAuth default 1 radius macAuth default 2 local web default 1 radius web default 2 local jwac default 1 radius jwac default 2 local SEQUENCE OF DAaaAuthGenericMethodEntry .1.3.6.1.4.1.171.14.150.1.4.1.1 |
dAaaAuthGenericMethodEntryAn entry defines a method which is groupped into a method list. DAaaAuthGenericMethodEntry .1.3.6.1.4.1.171.14.150.1.4.1.1.1 |
dAaaAuthGenMethodLstTypeThis object indicates the type for which the method list will be used. enable(1) - for determining the access to the privileged EXEC level. login(2) - for login authentication. dot1x(3) - for 802.1x authentication. jwac(4) - for JWAC authentication. macAuth(5) - for MAC authentication. web(6) - for Web authentication. igmpAuth(7) - for IGMP authentication. mldAuth(8) - for MLD authentication. Note: Not all method list types defined need to be supported. Enumeration .1.3.6.1.4.1.171.14.150.1.4.1.1.1.1 |
dAaaAuthGenMethodLstNameThis object indicates the name of the authentication method list. If dAaaAuthGenMethodLstType is not 'login', only 'default' can be specified for dAaaAuthGenMethodLstName. For the type which only supports 'default' method list name, the configured method list will take effect without being explicitly applied. If the type is 'login', the method list will take effect after the method list is applied in dAaaAuthLoginApplyTable. DAaaMethodListName (DLINKSW-AAA-COMMON-MIB) .1.3.6.1.4.1.171.14.150.1.4.1.1.1.2 |
dAaaAuthGenMethodPriorityThis is the method priority of a method within a method list. DAaaMethodPriority (DLINKSW-AAA-COMMON-MIB) .1.3.6.1.4.1.171.14.150.1.4.1.1.1.3 |
dAaaAuthGenMethodNameThis object indicates the authentication method name.rw DAaaMethodName (DLINKSW-AAA-COMMON-MIB) .1.3.6.1.4.1.171.14.150.1.4.1.1.1.4 |
dAaaAuthGenMethodRowStatusThe status of entry. Before modify the higher method, must destroy the lower method in method list.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.14.150.1.4.1.1.1.5 |
dAaaAuthLogin OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.150.1.4.1.2 |
dAaaAuthLoginApplyTableThis table contains entries for AAA authentication apply configured for Login. The following table describes the authentication commands apply. Session MethodListName ------- ------------------ telnet default console cons_auth ssh ssh_login SEQUENCE OF DAaaAuthLoginApplyEntry .1.3.6.1.4.1.171.14.150.1.4.1.2.1 |
dAaaAuthLoginApplyEntryAn entry containing the session of an authentication application used for Login. DAaaAuthLoginApplyEntry .1.3.6.1.4.1.171.14.150.1.4.1.2.1.1 |
dAaaAuthLoginApplySessionThis object indicates the session type of the entry. DAaaSessionType (DLINKSW-AAA-COMMON-MIB) .1.3.6.1.4.1.171.14.150.1.4.1.2.1.1.1 |
dAaaAuthLoginApplyListNameThis object indicates the method list name of the entry.rw DAaaMethodListName (DLINKSW-AAA-COMMON-MIB) .1.3.6.1.4.1.171.14.150.1.4.1.2.1.1.2 |
dAaaAuthLoginApplyRowStatusThe status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.14.150.1.4.1.2.1.1.3 |
dAaaAuthMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.150.1.4.2 |
dAaaAuthMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.150.1.4.2.1 |
dAaaAuthMIBComplianceThe compliance statement for entities which implement the DLINKSW-AAA-AUTH-MIB. Unknown .1.3.6.1.4.1.171.14.150.1.4.2.1.1 |
dAaaAuthMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.150.1.4.2.2 |
dAaaAuthMethodListGroupA collection of objects provides the method list for AAA authentication. Unknown .1.3.6.1.4.1.171.14.150.1.4.2.2.1 |
dAaaAuthcLoginMethodApplyGroupA collection of objects provides configuration to apply AAA method list for login authentication. Unknown .1.3.6.1.4.1.171.14.150.1.4.2.2.2 |
More MIBs from D-Link
Browse all D-LinkMIBs →SNMP MIB module
The DGS-1210-12TSME-BX MIB module provides management capabilities for the D-Link DES-1210-52ME switch, specifically enabling the monitoring and configuration of QinQ (802.1ad) VLAN encapsulation parameters, including inner tag insertion and drop counters for unmatched traffic. This module facilitates precise control over service provider bridging (SPB) operations by exposing metrics related to VLAN tag manipulation and packet discard events on the device's managed ports.
SNMP MIB module
Standard SNMP MIB module defining data structures for DGS-1210-28PME_AX.
Standard SNMP MIB module defining data structures for DGS-1210-28ME_AX.
Standard SNMP MIB module defining data structures for DGS-1210-20ME_AX.