DLINKPRIME-SYSLOG-MIB
Imported Objects
Objects
22 total| Object Name |
|---|
dlinkPrimeSyslogMIBThis MIB module defines objects for system log function. MODULE-IDENTITY .dlinkPrimeCommon.21 |
dpSyslogMIBNotifications OBJECT IDENTIFIER .dlinkPrimeCommon.21.0 |
dpSyslogMIBObjects OBJECT IDENTIFIER .dlinkPrimeCommon.21.1 |
dpSyslogGeneral OBJECT IDENTIFIER .dlinkPrimeCommon.21.1.1 |
dpSyslogLogOnEnabledThis object enables or disables the System Log function
during system runtime.rw TruthValue (SNMPv2-TC) .dlinkPrimeCommon.21.1.1.1 |
dpSyslogLogbufferThis object identifier represents the group of objects that are
related to the logging system message to local buffer. OBJECT IDENTIFIER .dlinkPrimeCommon.21.1.2 |
dpSyslogClearLogBufferThis object is used to clear log messages at logging buffer when set
to 'clear'.
No action is taken if this object is set to 'noOp'.
When read, the value 'noOp' is returned.rw Enumeration .dlinkPrimeCommon.21.1.2.1 |
dpSyslogLogBufferEnabledThis object indicates the state of logging system messages to the
local buffer.
Messages must enter the local message buffer first before it can
be further dispatched to other destinations.rw TruthValue (SNMPv2-TC) .dlinkPrimeCommon.21.1.2.2 |
dpSyslogServer OBJECT IDENTIFIER .dlinkPrimeCommon.21.1.3 |
dpSyslogServerAddressThis object indicates the IPv4 address of the SYSLOG server.rw IpAddress .dlinkPrimeCommon.21.1.3.1 |
dpSyslogServerPortThis object indicates the UDP port number to be used for the
SYSLOG server.rw Unsigned32 (514 | 1024..65535) .dlinkPrimeCommon.21.1.3.2 |
dpSyslogServerSeverityThis object indicates the severity of log messages that will be
sent to the server.rw Enumeration .dlinkPrimeCommon.21.1.3.3 |
dpSyslogServerFacilitySpecifies the logging facility of the log host.rw Enumeration .dlinkPrimeCommon.21.1.3.4 |
dpSyslogBufferTableNumThis object indicates the number of entries presented in the
dpSyslogBufferTable.ro Unsigned32 .dlinkPrimeCommon.21.1.4 |
dpSyslogBufferTableA table consists of a list of system log messages. SEQUENCE OF DpSyslogBufferEntry .dlinkPrimeCommon.21.1.5 |
dpSyslogBufferEntryAn entry defines a log message. DpSyslogBufferEntry .dlinkPrimeCommon.21.1.5.1 |
dpSyslogBufferLevelAn index that uniquely identifies the message.ro DisplayString (SNMPv2-TC) .dlinkPrimeCommon.21.1.5.1.1 |
dpSyslogBufferDateAndTimeThe date and time when the message is logged.ro DisplayString (SNMPv2-TC) .dlinkPrimeCommon.21.1.5.1.2 |
dpSyslogBufferDescriptionThe content of the log message.ro DisplayString (SNMPv2-TC) .dlinkPrimeCommon.21.1.5.1.3 |
dpSyslogMIBConformance OBJECT IDENTIFIER .dlinkPrimeCommon.21.2 |
dpSyslogMIBCompliances OBJECT IDENTIFIER .dlinkPrimeCommon.21.2.1 |
dpSyslogMIBGroups OBJECT IDENTIFIER .dlinkPrimeCommon.21.2.1.2 |
More MIBs from Default
Browse all DefaultMIBs →SNMP MIB module
The AVAYA-WLAN-MIB provides SNMP-based management and monitoring capabilities for Avaya wireless LAN infrastructure, enabling the collection of performance metrics such as access point status, client association counts, signal strength, and radio interface statistics. This module facilitates the tracking of WLAN-specific events and configuration parameters to support network availability and troubleshooting within Avaya wireless deployments.
The VMWARE-NSX-MIB enables SNMP-based monitoring and management of VMware NSX-T Data Center virtual network infrastructure, exposing metrics for logical switches, routers, distributed firewalls, and overlay tunnel states. It facilitates the tracking of Layer 2 through Layer 7 service instances, including access control lists, Quality of Service policies, and virtual network topology changes within the software-defined networking environment.
Standard SNMP MIB module defining data structures for 923switch.m.
Standard SNMP MIB module defining data structures for CTATX-MIB.
SNMP MIB module