DLINKPRIME-SWITCHPORT-MIB
The DLINKPRIME-SWITCHPORT-MIB provides vendor-specific SNMP objects for configuring and monitoring individual port parameters on D-Link Prime series switches that fall outside standard IEEE or IETF MIB definitions. This module enables granular management of proprietary port attributes, such as specific link aggregation states, proprietary error counters, and non-standard operational modes, to supplement standard interface monitoring.
Imported Objects
Objects
11 total| Object Name |
|---|
dlinkPrimeSwitchPortMIBThis MIB module defines objects for per-port configuration which
are not covered by standard MIB(s). MODULE-IDENTITY .dlinkPrimeCommon.20 |
dpSwPortNotifications OBJECT IDENTIFIER .dlinkPrimeCommon.20.0 |
dpSwPortObjects OBJECT IDENTIFIER .dlinkPrimeCommon.20.1 |
dpSwPortIfTableA list of physical port interface entries. SEQUENCE OF DpSwPortIfEntry .dlinkPrimeCommon.20.1.1 |
dpSwPortIfEntryAn entry in dpSwPortIfTable contains port-specific configuration
which cannot be covered by standard MIBs (EtherLike or MAU-MIB). DpSwPortIfEntry .dlinkPrimeCommon.20.1.1.1 |
dpSwPortIfMdixUses the object to configure the state of Media-Dependent Interface
Crossover (MDIX) of the port.rw Enumeration .dlinkPrimeCommon.20.1.1.1.1 |
dpSwPortIfJumboFrameSizeThe size of the largest packet which can be received on the
interface(only support 9216 and 1518), specified in octets.rw Unsigned32 .dlinkPrimeCommon.20.1.1.1.2 |
dpSwPortIfSpeedAutoDowngradeThis object indicates whether automatically downgrade the advertised
speed in case a link cannot be established at the available speed.rw TruthValue (SNMPv2-TC) .dlinkPrimeCommon.20.1.1.1.3 |
dpSwPortConformance OBJECT IDENTIFIER .dlinkPrimeCommon.20.2 |
dpSwPortCompliances OBJECT IDENTIFIER .dlinkPrimeCommon.20.2.1 |
dpSwPortGroups OBJECT IDENTIFIER .dlinkPrimeCommon.20.2.2 |
More MIBs from Default
Browse all DefaultMIBs →SNMP MIB module
The AVAYA-WLAN-MIB provides SNMP-based management and monitoring capabilities for Avaya wireless LAN infrastructure, enabling the collection of performance metrics such as access point status, client association counts, signal strength, and radio interface statistics. This module facilitates the tracking of WLAN-specific events and configuration parameters to support network availability and troubleshooting within Avaya wireless deployments.
The VMWARE-NSX-MIB enables SNMP-based monitoring and management of VMware NSX-T Data Center virtual network infrastructure, exposing metrics for logical switches, routers, distributed firewalls, and overlay tunnel states. It facilitates the tracking of Layer 2 through Layer 7 service instances, including access control lists, Quality of Service policies, and virtual network topology changes within the software-defined networking environment.
Standard SNMP MIB module defining data structures for 923switch.m.
Standard SNMP MIB module defining data structures for CTATX-MIB.
SNMP MIB module