DLINKPRIME-STP-EXT-MIB
Imported Objects
Objects
16 total| Object Name |
|---|
dlinkPrimeStpExtMIBThe MIB module for managing D-Link STP extensions which are not covered
by standard MIBs. MODULE-IDENTITY .dlinkPrimeCommon.18 |
dpStpExtMIBNotifications OBJECT IDENTIFIER .dlinkPrimeCommon.18.0 |
dpStpExtMIBObjects OBJECT IDENTIFIER .dlinkPrimeCommon.18.1 |
dpStpExtGblMgmt OBJECT IDENTIFIER .dlinkPrimeCommon.18.1.1 |
dpStpExtStpGblStateEnabledThis object enables global spanning-tree function.rw TruthValue (SNMPv2-TC) .dlinkPrimeCommon.18.1.1.1 |
dpStpExtStpModeThis object set spanning-tree mode.
stp - The Spanning Tree Protocol(IEEE 802.1D) is a network
protocol that ensures a loop-free topology for any
bridged Ethernet local area network.
rstp - Rapid Spanning Tree Protocol(IEEE 802.1w), an enhancement
to Spanning Tree Protocol. RSTP provides significantly
faster spanning tree convergence after a topology change,
introducing new convergence behaviors and bridge port
roles to do this. RSTP was designed to be
backwards-compatible with standard STP.rw Enumeration .dlinkPrimeCommon.18.1.1.2 |
dpStpExtNotificationEnableThis object indicates whether a specified notification is enabled or not.
If a bit corresponding to a notification is set to 1, then
the specified notification can be generated.
newRoot(0) - the newRoot notification as defined in BRIDGE-MIB.
topologyChange(1)
BRIDGE-MIB.rw Bits .dlinkPrimeCommon.18.1.1.3 |
dpStpExtPortMgmt OBJECT IDENTIFIER .dlinkPrimeCommon.18.1.2 |
dpStpExtPortTableA table that contains port-specific information
for the STP extensions. SEQUENCE OF DStpExtPortEntry .dlinkPrimeCommon.18.1.2.1 |
dpStpExtPortEntryAn entry in dpStpExtPortTable. This object indicates per port
STP information which is not covered by standard MIB(s). DStpExtPortEntry .dlinkPrimeCommon.18.1.2.1.1 |
dpStpExtPortNumberThe port number of the port for this entry. IEEE8021BridgePortNumber .dlinkPrimeCommon.18.1.2.1.1.1 |
dpStpExtPortFastThis object indicates the fast port at the specific port.rw Enumeration .dlinkPrimeCommon.18.1.2.1.1.2 |
dpStpExtPortStateThis object indicates the state of STP port.
errDisabled(1): the port is at error disabled state.
blocking(2) - broken(6): When STP is enabled on the port and the
port is not at error disabled state, dpStpExtPortState
has the same value as dot1dStpPortState, as defined
by application of STP.
noStpForwarding(7) - STP is disabled at the port and this port is
functioning.
nonStpOther(8) - STP is disabled at the port and this port is link-down
or other malfunctioning situations.ro Enumeration .dlinkPrimeCommon.18.1.2.1.1.3 |
dpStpExtMIBConformance OBJECT IDENTIFIER .dlinkPrimeCommon.18.2 |
dpStpExtMIBCompliances OBJECT IDENTIFIER .dlinkPrimeCommon.18.2.1 |
dpStpExtGroups OBJECT IDENTIFIER .dlinkPrimeCommon.18.2.1.2 |
More MIBs from Default
Browse all DefaultMIBs →SNMP MIB module
The AVAYA-WLAN-MIB provides SNMP-based management and monitoring capabilities for Avaya wireless LAN infrastructure, enabling the collection of performance metrics such as access point status, client association counts, signal strength, and radio interface statistics. This module facilitates the tracking of WLAN-specific events and configuration parameters to support network availability and troubleshooting within Avaya wireless deployments.
The VMWARE-NSX-MIB enables SNMP-based monitoring and management of VMware NSX-T Data Center virtual network infrastructure, exposing metrics for logical switches, routers, distributed firewalls, and overlay tunnel states. It facilitates the tracking of Layer 2 through Layer 7 service instances, including access control lists, Quality of Service policies, and virtual network topology changes within the software-defined networking environment.
Standard SNMP MIB module defining data structures for 923switch.m.
Standard SNMP MIB module defining data structures for CTATX-MIB.
SNMP MIB module