DLINKPRIME-SNMP-MIB
This MIB module defines objects for configuring SNMP ( Simple Network Management Protocol )
Main OID:
dlinkPrimeSnmpMIB.dlinkPrimeCommon.15
22
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
22 total| Object Name |
|---|
dlinkPrimeSnmpMIBThis MIB module defines objects for configuring SNMP
( Simple Network Management Protocol ) MODULE-IDENTITY .dlinkPrimeCommon.15 |
dpSnmpMIBNotifications OBJECT IDENTIFIER .dlinkPrimeCommon.15.0 |
dpSnmpMIBObjects OBJECT IDENTIFIER .dlinkPrimeCommon.15.1 |
dpSnmpGeneral OBJECT IDENTIFIER .dlinkPrimeCommon.15.1.1 |
dpSnmpServiceEnabledA Boolean value represents the SNMP server is Enabled or Disabled.rw TruthValue (SNMPv2-TC) .dlinkPrimeCommon.15.1.1.1 |
dpSnmpMIBTrap OBJECT IDENTIFIER .dlinkPrimeCommon.15.1.2 |
dpSnmpTrapGlobalEnabledA Boolean value to represent the global state of sending of trap
packets.rw TruthValue (SNMPv2-TC) .dlinkPrimeCommon.15.1.2.1 |
dpSnmpTrapGlobalNotifyEnableThis object indicates global state about whether a specified
notification is enabled or not.
If a bit corresponding to a notification is set to 1, then
the specified notification can be generated.
linkUp(0) - sending a standard linkUp notification (defined in IF-MIB).
linkDown(1) - sending a standard linkDown notification (defined in IF-MIB).
coldStart(2) - sending a standard coldStart notification (defined in SNMPv2-MIB).
warmStart(3) - sending a standard warmStart notification (defined in SNMPv2-MIB).
Note: please use snmpEnableAuthenTraps (defined in SNMPv2-MIB) to control
the generation of authenticationFailure traps.rw Bits .dlinkPrimeCommon.15.1.2.2 |
dpSnmpAccessCfg OBJECT IDENTIFIER .dlinkPrimeCommon.15.1.3 |
dpSnmpCommunityTableThis table consists of a list of communities. SEQUENCE OF DpSnmpCommunityEntry .dlinkPrimeCommon.15.1.3.1 |
dpSnmpCommunityEntryAn entry defines additional information which is not covered at
snmpCommunityTable (defined in SNMP-COMMUNITY-MIB).
An entry appears in this table when a community is created in
snmpCommunityTable. DpSnmpCommunityEntry .dlinkPrimeCommon.15.1.3.1.1 |
dpSnmpCommunityNameThis object indicates the name of the community. SnmpAdminString (SNMP-FRAMEWORK-MIB) .dlinkPrimeCommon.15.1.3.1.1.1 |
dpSnmpCommunityAccessListNameThis object indicates the name of a standard access list to control
the user to use this community string to access to the SNMP agent.
Specify the valid user in the source address field of the access
list entry.
A zero length string indicates the access list is not specified.rw DisplayString (SNMPv2-TC) .dlinkPrimeCommon.15.1.3.1.1.3 |
dpSnmpHostTableThis table consists of a list of recipients for the SNMP
notification. SEQUENCE OF DpSnmpHostEntry .dlinkPrimeCommon.15.1.3.2 |
dpSnmpHostEntryAn entry consists of additional informaiton which is not covered
at snmpTargetAddrTable and snmpTargetParamsTable (defined in
SNMP-TARGET-MIB).
An entry appears in this table when a target address is created in
snmpTargetAddrTable. DpSnmpHostEntry .dlinkPrimeCommon.15.1.3.2.1 |
dpSnmpHostIndexThe ID number for this entry. Unsigned32 .dlinkPrimeCommon.15.1.3.2.1.1 |
dpSnmpHostIPv4AddrThis object indicates the IPv4 address of the recipients.rw IpAddress .dlinkPrimeCommon.15.1.3.2.1.2 |
dpSnmpHostSecurityThis object indicates the User-based Security Model for the recipients.rw Enumeration .dlinkPrimeCommon.15.1.3.2.1.3 |
dpSnmpHostCommunityNameThis object indicates the address name of the recipients.rw SnmpAdminString .dlinkPrimeCommon.15.1.3.2.1.4 |
dpSnmpMIBConformance OBJECT IDENTIFIER .dlinkPrimeCommon.15.2 |
dpSnmpCompliances OBJECT IDENTIFIER .dlinkPrimeCommon.15.2.1 |
dpSnmpGroups OBJECT IDENTIFIER .dlinkPrimeCommon.15.2.2 |