DLINKPRIME-POE-MIB
AI MIB Summary
The DLINKPRIME-POE-MIB module enables monitoring and management of Power over Ethernet (PoE) parameters on D-Link Prime series network devices by extending the standard POWER-ETHERNET-MIB (RFC 3621) to expose specific vendor implementations of power allocation, consumption, and port status metrics.
A MIB module for extending POWER-ETHERNET-MIB specified in RFC 3621.
Main OID:
dlinkPrimePoeExtMIB.dlinkPrimeCommon.11
20
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
20 total| Object Name |
|---|
dlinkPrimePoeExtMIBA MIB module for extending POWER-ETHERNET-MIB specified in
RFC 3621. MODULE-IDENTITY .dlinkPrimeCommon.11 |
dpPoeMIBNotifications OBJECT IDENTIFIER .dlinkPrimeCommon.11.0 |
dpPoeMIBObjects OBJECT IDENTIFIER .dlinkPrimeCommon.11.1 |
dpPoeIfObjects OBJECT IDENTIFIER .dlinkPrimeCommon.11.1.1 |
dpPoeIfCfgTableThis table consists of a list of PoE configuration
information for ports. SEQUENCE OF DpPoeIfCfgEntry .dlinkPrimeCommon.11.1.1.1 |
dpPoeIfCfgEntryAn entry contains PoE configuration on a port. DpPoeIfCfgEntry .dlinkPrimeCommon.11.1.1.1.1 |
dpPoeIfStateThis object indicates the PoE state of the entry.
auto(1) - the port will automatically detect the PD and provision
power to the PD. The max wattage value which can be provisioned
to the port is determined by dpPoeIfMaxPower. If dpPoeIfMaxPower
is unspecified, then the class of the PD auto determines the
maximum wattage which can be provisioned. The PD will not be
provisioned if it requests more wattage than the max wattage
which is determined.
never(2) - indicates the port will not supply power to connected PD;
static(3) - indicates manager pre-allocate power budget to the port
by configuring the dpPoeIfMaxPower object. The power budget is allocated
to the port even though there is no PD connected to the port.
If dpPoeIfMaxPower is not configured, default value is 15400mW for 802.3af
and 30000mW for 802.3at.
class1(4)~class4(7) - Configures PoE port power limit.rw Enumeration .dlinkPrimeCommon.11.1.1.1.1.1 |
dpPoeIfMaxPowerThis object indicates the max wattage value which can
be provisioned to the port.
Note: This object is valid only while the dpPoeIfState
object is configured as static.rw Integer32 (0 | 1000..30000) UNITS "milliwatts" .dlinkPrimeCommon.11.1.1.1.1.2 |
dpPoeIfTimeRangeThis object indicates the name of time-range profile to delineate
the activation period.
A zero length string indicates the time-range is not specified.rw DisplayString .dlinkPrimeCommon.11.1.1.1.1.3 |
dpPoeIfInfoObjects OBJECT IDENTIFIER .dlinkPrimeCommon.11.1.1.2 |
dpPoeIfStatusTableThis table consists of a list of PoE status for ports. SEQUENCE OF DpPoeIfStatusEntry .dlinkPrimeCommon.11.1.1.2.1 |
dpPoeIfStatusEntryAn entry consists of PoE status for a port. DpPoeIfStatusEntry .dlinkPrimeCommon.11.1.1.2.1.1 |
dpPoeIfDetectStatusThis object indicates the operational status of the port PD detection.
disabled(1) - PSE function is disabled.
searching(2) - Remote PD is not connected.
requesting(3) - Remote PD is inserted, but the PSE doesn't provide power yet.
delivering(4) - Remote PD is now powering by PoE system.
faulty(5) - Device detection or a powered device is in a faulty state.ro Enumeration .dlinkPrimeCommon.11.1.1.2.1.1.1 |
dpPoeIfFaultyTypeThis object indicates the specific faulty type. It is meaningful
only when dpPoeIfDetectStatus object is 'faulty'.
notApplicable(0) - indicates this object is meaningless, e.g. the
dpPoeIfDetectStatus is not 'faulty'.
mpsAbsent(1) - indicates MPS(Maintain Power Signature) Absent
pdShort(2) - indicates PD Short
overload(3) - indicates Overload
powerDenied(4) - indicates Power Denied
thermalShutdown(5)- indicates Thermal Shutdown
startupFailure(6) - indicates Startup Failure
classificationFailure(7) - indicates Classification Failure(IEEE 802.3at)ro Enumeration .dlinkPrimeCommon.11.1.1.2.1.1.2 |
dpPoeIfMeasurementTableThis table consists of a list of POE measurement
information for ports. SEQUENCE OF DpPoEIfMeasurementEntry .dlinkPrimeCommon.11.1.1.2.2 |
dpPoeIfMeasurementEntryAn entry consists of PoE measurement information of a port. DpPoEIfMeasurementEntry .dlinkPrimeCommon.11.1.1.2.2.1 |
dpPoeIfPowerThis object indicates consumption power of port in milliwatts.ro Integer32 .dlinkPrimeCommon.11.1.1.2.2.1.1 |
dpPoeMIBConformance OBJECT IDENTIFIER .dlinkPrimeCommon.11.2 |
dpPoeMIBCompliances OBJECT IDENTIFIER .dlinkPrimeCommon.11.2.1 |
dpPoeMIBGroups OBJECT IDENTIFIER .dlinkPrimeCommon.11.2.2 |