DLINKPRIME-DEVICE-INFORMATION-MIB
AI MIB Summary
The DLINKPRIME-DEVICE-INFORMATION-MIB provides SNMP-accessible objects to retrieve static hardware identification and firmware status data for D-Link Prime series networking equipment. This module enables network management systems to inventory device attributes such as model numbers, serial identifiers, and software versions without requiring active protocol state monitoring.
This MIB module defines objects for device information function.
Main OID:
dlinkPrimeDeviceInfoMIB.dlinkPrimeCommon.3
15
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
15 total| Object Name |
|---|
dlinkPrimeDeviceInfoMIBThis MIB module defines objects for device information function. MODULE-IDENTITY .dlinkPrimeCommon.3 |
dpDeviceInfoMIBObjects OBJECT IDENTIFIER .dlinkPrimeCommon.3.1 |
dpDeviceInfoSysConfiguration OBJECT IDENTIFIER .dlinkPrimeCommon.3.1.1 |
dpDeviceInfoIpV4AddrCfgModeSpecifies the means by which the default interface in the device
gets the IP address.
If 'manual' mode is selected, the default interface takes the
'sysDefaultIpAddr' configured in the system.
If 'dynamic' mode is selected, the default interface gets the IP address
through dynamic IP address configuration protocols such as RARP client,
BootP client, DHCP Client, etc.
If the system fails to get the IP address dynamically through all the
above protocols, the default interface uses the 'sysDefaultIpAddr'
configured in the system.rw Enumeration .dlinkPrimeCommon.3.1.1.1 |
dpDeviceInfoIpV4AddrDefault IP Address of the system.
This IP address, if modified, will take effect only when the
configuration is stored & restored.rw IpAddress .dlinkPrimeCommon.3.1.1.2 |
dpDeviceInfoIpV4SubnetMaskIP subnet mask for the default IP address.
This subnet mask, if modified, will take effect only when the
configuration is stored & restored.rw IpAddress .dlinkPrimeCommon.3.1.1.3 |
dpDeviceInfoGatewayGatewayrw IpAddress .dlinkPrimeCommon.3.1.1.4 |
dpDeviceInfoDhcpRetryThis object indicates the DHCP retry Times when DHCP client is
enabled.rw Unsigned32 .dlinkPrimeCommon.3.1.1.5 |
dpDeviceInfoIpV6GlobalStateThe state of IPv6 that you want this interface to be in.
It must be a exist vlan id.rw Enumeration .dlinkPrimeCommon.3.1.1.6 |
dpDeviceInfoIpV6AddressIpAddrStatic IPv6 Address.rw Ipv6Address .dlinkPrimeCommon.3.1.1.7 |
dpDeviceInfoMacAddrThe MAC address of this system.ro MacAddress (SNMPv2-TC) .dlinkPrimeCommon.3.1.2 |
dpDeviceInfoBootPromVersionA textual string containing the PROM version of the system.ro DisplayString .dlinkPrimeCommon.3.1.3 |
dpDeviceInfoFirmwareVersionA textual string containing the firmware version of the system.ro DisplayString .dlinkPrimeCommon.3.1.4 |
dpDeviceInfoHardwareVersionA textual string containing the hardware version of the system.ro DisplayString .dlinkPrimeCommon.3.1.5 |
dpDeviceInfoSerialNumberA text string containing the serial number of the system.ro DisplayString (SNMPv2-TC) .dlinkPrimeCommon.3.1.6 |