DLINKMGMT-MIB
AI MIB Summary
The DLINKMGMT-MIB provides the standard SNMP interface for monitoring and configuring D-Link enterprise networking hardware, including switches, routers, and access points. It exposes critical operational metrics such as interface status and counters, system resource utilization, port statistics, and device configuration parameters for network management systems.
The Structure of Common Management Information for the D-Link enterprise.
Main OID:
dlinkMgmtMIB.1.3.6.1.4.1.171.11
48
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
48 total| Object Name |
|---|
dlinkMgmtMIBThe Structure of Common Management Information for the
D-Link enterprise. MODULE-IDENTITY .1.3.6.1.4.1.171.11 |
agentConfigInfo OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.1 |
agentBasicInfo OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.1.1 |
agentRuntimeSwVersionThis is a textual description of the runtime software version and
revision. If the version number is one and revision number is zero
agentRuntimeSwVersion would be 'Ver. 1.0'ro DisplayString .1.3.6.1.4.1.171.11.1.1.1 |
agentPromFwVersionThis is a textual description of the agent PROM firmware version
and revision. If the version number is one and revision number is
zero agentPromFwVersion would be 'Ver. 1.0'ro DisplayString .1.3.6.1.4.1.171.11.1.1.2 |
agentHwRevisionThis is a textual description of the hardware version and revision.
If the version number is one and revision number is zero
agentHwRevision would be 'Ver. 1.0'ro DisplayString .1.3.6.1.4.1.171.11.1.1.3 |
agentMgmtProtocolCapabilityThe network management protocol(s) supported by this agent.ro Enumeration .1.3.6.1.4.1.171.11.1.1.4 |
agentMibCapabilityTableA list of MIB capability entries supported by this agent. SEQUENCE OF AgentMibCapabilityEntry .1.3.6.1.4.1.171.11.1.1.5 |
agentMibCapabilityEntryA MIB capability entry contains objects describing a particular MIB
supported by this agent. AgentMibCapabilityEntry .1.3.6.1.4.1.171.11.1.1.5.1 |
agentMibCapabilityIndexA list of agentMibCapabilityDescr entries.ro INTEGER .1.3.6.1.4.1.171.11.1.1.5.1.1 |
agentMibCapabilityDescrThe name of the MIB supported by the agent.ro DisplayString .1.3.6.1.4.1.171.11.1.1.5.1.2 |
agentMibCapabilityVersionThe version of the MIB specified in this entry.ro INTEGER .1.3.6.1.4.1.171.11.1.1.5.1.3 |
agentMibCapabilityTypeThe type of the MIB specified in this entry.ro Enumeration .1.3.6.1.4.1.171.11.1.1.5.1.4 |
agentMgmtRoleThe role of this agent within this particular switch structure .ro Enumeration .1.3.6.1.4.1.171.11.1.1.6 |
agentBasicConfig OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.1.2 |
agentFirmwareFileThe name of the firmware file to be downloaded.rw DisplayString .1.3.6.1.4.1.171.11.1.2.1 |
agentFirmwareSourceAddrThe ip address where new firmware file is located on.rw IpAddress .1.3.6.1.4.1.171.11.1.2.2 |
agentFirmwareUpdateCtrlwhile this object is set to 'activate', FTP download is working
immediately, and agentFirmwareUpdateState is changed to 'in-process'.
The agent always returns 'other' while it is read.rw Enumeration .1.3.6.1.4.1.171.11.1.2.3 |
agentFirmwareUpdateStatestatus of firmware download control. If the value is 'other',
means never firmware updated since device started up.ro Enumeration .1.3.6.1.4.1.171.11.1.2.4 |
agentFirmwareLastUpdateTimerecord the sysUptime for last active agentFirmwareUpdateCtrl. Default
is set to 0.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.171.11.1.2.5 |
agentSystemResetThis object indicates the agent system reset state. Setting this
object to no-reset(3) has no effect. Setting this object to
warm-start(2) will reset the agent. The agent always returns no-reset(3)
when this object is read.rw Enumeration .1.3.6.1.4.1.171.11.1.2.6 |
agentRs232PortConfigThis object indicates the RS-232C mode while device restart.rw Enumeration .1.3.6.1.4.1.171.11.1.2.7 |
agentOutOfBandBaudRateConfigThis object indicates the out_of_band baud rate while device
restart.rw Enumeration .1.3.6.1.4.1.171.11.1.2.8 |
agentIpProtoConfig OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.1.3 |
agentIpNumOfIfThe total number of IP interfaces supported by this agent.ro INTEGER .1.3.6.1.4.1.171.11.1.3.1 |
agentIpIfTableA list of IP interface entries supported by the agent. SEQUENCE OF AgentIpIfEntry .1.3.6.1.4.1.171.11.1.3.2 |
agentIpIfEntryAn agentIPIfEntry contains information about a particular IP
interface. AgentIpIfEntry .1.3.6.1.4.1.171.11.1.3.2.1 |
agentIpIfIndexThis object uniquely identifies the IP interface number in the
agentIpIfTable. This value should never greater than agentIpNumOfIf .ro INTEGER .1.3.6.1.4.1.171.11.1.3.2.1.1 |
agentIpIfAddressThe IP address of the interface .ro IpAddress .1.3.6.1.4.1.171.11.1.3.2.1.2 |
agentIpIfNetMaskThe IP net mask for this interface .ro IpAddress .1.3.6.1.4.1.171.11.1.3.2.1.3 |
agentIpIfDefaultRouterThe default gateway for this IP interface.ro IpAddress .1.3.6.1.4.1.171.11.1.3.2.1.4 |
agentIpIfMacAddrThe MAC address of this IP interface. For interfaces which do not
have such an address. (e.g., a serial line), this object should
contain an octet string of zero length.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.171.11.1.3.2.1.5 |
agentIpIfTypeThe physical layer interface of the IP interface.ro Enumeration .1.3.6.1.4.1.171.11.1.3.2.1.6 |
agentIpBootServerAddrThe IP Address of Boot Server.rw IpAddress .1.3.6.1.4.1.171.11.1.3.3 |
agentIpGetIpFromBootpServerThis object indicates whether the agent get its system IP address
from Bootp/DHCP server at start up.rw Enumeration .1.3.6.1.4.1.171.11.1.3.4 |
agentIpUnauthAddrThe IP address of an unauthorized SNMP packet.ro IpAddress .1.3.6.1.4.1.171.11.1.3.5 |
agentIpUnauthCommThe community string of an unauthorized SNMP packet.ro DisplayString .1.3.6.1.4.1.171.11.1.3.6 |
agentIpTrapManagerTableA list of trap manager entries to which to send SNMP traps . SEQUENCE OF AgentIpTrapManagerEntry .1.3.6.1.4.1.171.11.1.3.9 |
agentIpTrapManagerEntryThis entry contains the particular trap manager settings. AgentIpTrapManagerEntry .1.3.6.1.4.1.171.11.1.3.9.1 |
agentIpTrapManagerIpAddrThe IP address to receive SNMP traps from this device.ro IpAddress .1.3.6.1.4.1.171.11.1.3.9.1.1 |
agentIpTrapManagerCommThe community string of the SNMP trap packet sent to the trap
manager.rw DisplayString .1.3.6.1.4.1.171.11.1.3.9.1.2 |
agentIpTrapManagerStatusThis object indicates whether or not the trap should be send to
this trap manager.rw Enumeration .1.3.6.1.4.1.171.11.1.3.9.1.3 |
agenMaxManagerIpMaximum number of entries in the management ip security
table (agentManagerIpSecurityTable).ro INTEGER .1.3.6.1.4.1.171.11.1.3.10 |
agenCurrtManagerIpCurrent applied number of entries in the management ip security
table .ro INTEGER .1.3.6.1.4.1.171.11.1.3.11 |
agentManagerIpSecurityTableA table that contains information about security management ip .
When the table is empty , the device permit any ip to manage the
device . If the table is'nt empty , it will only permit the same
destination address to manage the device . SEQUENCE OF AgentManagerIpSecurityEntry .1.3.6.1.4.1.171.11.1.3.12 |
agentManagerIpSecurityEntryAn entry containing a security ip address for a particular security
request . AgentManagerIpSecurityEntry .1.3.6.1.4.1.171.11.1.3.12.1 |
agentManagerIpSecurityAddrThe IP address for the security request .ro IpAddress .1.3.6.1.4.1.171.11.1.3.12.1.1 |
agentManagerIpSecurityStatusThis object indicates the security ip address status . To writing
disabled value to the object, and then the corresponding entry will
be removed from the table.rw Enumeration .1.3.6.1.4.1.171.11.1.3.12.1.2 |