DLINK-SYSLOG-MIB
The Structure of System Log Information for the proprietary enterprise.
Main OID:
swDLinkSysLogMIB.1.3.6.1.4.1.171.12.12
11
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
11 total| Object Name |
|---|
swDLinkSysLogMIBThe Structure of System Log Information for the proprietary enterprise. MODULE-IDENTITY .1.3.6.1.4.1.171.12.12 |
swSysLogCtrlStateThis object can be enabled or disabled functionality of System Log during runtime of the system.rw Enumeration .1.3.6.1.4.1.171.12.12.1 |
swSysLogServerTableThis table contain System Log Server information. SEQUENCE OF SwSysLogServerEntry .1.3.6.1.4.1.171.12.12.2 |
swSysLogServerEntryA list of information about System Log Server. SwSysLogServerEntry .1.3.6.1.4.1.171.12.12.2.1 |
swSysLogServerIndexThe index of System Log Server entry ,and is unique.ro Enumeration .1.3.6.1.4.1.171.12.12.2.1.1 |
swSysLogServerFacilitysyslog Message Facilitiesrw Enumeration .1.3.6.1.4.1.171.12.12.2.1.2 |
swSysLogServerSeveritysyslog Message Severitiesrw Enumeration .1.3.6.1.4.1.171.12.12.2.1.3 |
swSysLogServerUDPPortsyslog uses the user datagram protocol (UDP) as its underlying tranaposrt layer mechanism. The UDP port that has been assigned to syslog is 514. It is RECOMMENDED that the source port also be 514 to indicate that the message is form the syslog process of the sender, but there have been cases seen where valid syslog messages have come from a sender with a source port other than 514. If the sender uses a source port other than 514 then it is RECOMMENDED and has been considered to be good from that subsequent messages are from a single consistent port.rw INTEGER .1.3.6.1.4.1.171.12.12.2.1.4 |
swSysLogServerIPAddressspecifies the IP address of the System Log Server.rw IpAddress .1.3.6.1.4.1.171.12.12.2.1.5 |
swSysLogServerStateenabled or disabled the specific System Log Server during runtime.rw Enumeration .1.3.6.1.4.1.171.12.12.2.1.6 |
swSysLogServerRowStatusindicates the status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.12.12.2.1.7 |
More MIBs from D-Link
Browse all D-LinkMIBs →DGS-1210-28XME-BX
SNMP MIB module
2033 objects→
DGS-1210-12TSME-BX
The DGS-1210-12TSME-BX MIB module provides management capabilities for the D-Link DES-1210-52ME switch, specifically enabling the monitoring and configuration of QinQ (802.1ad) VLAN encapsulation parameters, including inner tag insertion and drop counters for unmatched traffic. This module facilitates precise control over service provider bridging (SPB) operations by exposing metrics related to VLAN tag manipulation and packet discard events on the device's managed ports.
2030 objects→
DGS-1210-28XSME-BX
SNMP MIB module
2016 objects→
DGS-1210-28PME_AX
Standard SNMP MIB module defining data structures for DGS-1210-28PME_AX.
1942 objects→
DGS-1210-28ME_AX
Standard SNMP MIB module defining data structures for DGS-1210-28ME_AX.
1941 objects→
DGS-1210-20ME_AX
Standard SNMP MIB module defining data structures for DGS-1210-20ME_AX.
1941 objects→