Home/Catalog/DLINK-EQUIPMENT-MIB

DLINK-EQUIPMENT-MIB

Name: SNMP MIBs and OID Database
Creator: Quadrata FZCO
License: https://opensource.org/licenses/MIT

DLink equipments MIB .

Main OID:

swDlinkEquipmentMIB.1.3.6.1.4.1.171.12.11

Objects

Active

Status

Dependencies

Imported Objects

SNMPv2-SMI

SNMPv2-TC

DLINK-ID-REC-MIB

Objects

30 total

Object Name	Syntax	OID
swDlinkEquipmentMIBDLink equipments MIB . MODULE-IDENTITY `.1.3.6.1.4.1.171.12.11`	MODULE-IDENTITY	`.1.3.6.1.4.1.171.12.11`
swDlinkEquipmentMib OBJECT IDENTIFIER `.1.3.6.1.4.1.171.12.11.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.171.12.11.1`
swDlinkEquipmentCapacityIndicates the equipment capacity supported in the system .ro Bits `.1.3.6.1.4.1.171.12.11.1.1`	Bits	`.1.3.6.1.4.1.171.12.11.1.1`
swPowerTableA list of temperature. SEQUENCE OF SwPowerEntry `.1.3.6.1.4.1.171.12.11.1.6`	SEQUENCE OF SwPowerEntry	`.1.3.6.1.4.1.171.12.11.1.6`
swPowerEntryA entry of Power information. SwPowerEntry `.1.3.6.1.4.1.171.12.11.1.6.1`	SwPowerEntry	`.1.3.6.1.4.1.171.12.11.1.6.1`
swPowerUnitIndexIndicates ID of the unit in the Systemro INTEGER `.1.3.6.1.4.1.171.12.11.1.6.1.1`	INTEGER	`.1.3.6.1.4.1.171.12.11.1.6.1.1`
swPowerIDIndicates ID of the power 1 : main power 2 : redundant power .ro INTEGER `.1.3.6.1.4.1.171.12.11.1.6.1.2`	INTEGER	`.1.3.6.1.4.1.171.12.11.1.6.1.2`
swPowerStatusIndicates status of the powerro Enumeration `.1.3.6.1.4.1.171.12.11.1.6.1.3`	Enumeration	`.1.3.6.1.4.1.171.12.11.1.6.1.3`
swUnitMgmt OBJECT IDENTIFIER `.1.3.6.1.4.1.171.12.11.1.9`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.171.12.11.1.9`
swUnitStackingVersionThis object indicates the version of this stacking system .ro INTEGER `.1.3.6.1.4.1.171.12.11.1.9.1`	INTEGER	`.1.3.6.1.4.1.171.12.11.1.9.1`
swUnitMaxSupportedUnitsMaximum number of units are supported in the system.ro INTEGER `.1.3.6.1.4.1.171.12.11.1.9.2`	INTEGER	`.1.3.6.1.4.1.171.12.11.1.9.2`
swUnitNumOfUnitThe current number of units.ro INTEGER `.1.3.6.1.4.1.171.12.11.1.9.3`	INTEGER	`.1.3.6.1.4.1.171.12.11.1.9.3`
swUnitMgmtTableThis table contains the unit information. SEQUENCE OF SwUnitMgmtEntry `.1.3.6.1.4.1.171.12.11.1.9.4`	SEQUENCE OF SwUnitMgmtEntry	`.1.3.6.1.4.1.171.12.11.1.9.4`
swUnitMgmtEntryA list of management information for each unit in the system. SwUnitMgmtEntry `.1.3.6.1.4.1.171.12.11.1.9.4.1`	SwUnitMgmtEntry	`.1.3.6.1.4.1.171.12.11.1.9.4.1`
swUnitMgmtIdThis object indicates the specific entry in the stacking/chassis table.ro INTEGER `.1.3.6.1.4.1.171.12.11.1.9.4.1.1`	INTEGER	`.1.3.6.1.4.1.171.12.11.1.9.4.1.1`
swUnitMgmtMacAddrThe Mac address of this unit.ro MacAddress (SNMPv2-TC) `.1.3.6.1.4.1.171.12.11.1.9.4.1.2`	MacAddress (SNMPv2-TC)	`.1.3.6.1.4.1.171.12.11.1.9.4.1.2`
swUnitMgmtStartPortThis object indicates the start port of this unit.ro INTEGER `.1.3.6.1.4.1.171.12.11.1.9.4.1.3`	INTEGER	`.1.3.6.1.4.1.171.12.11.1.9.4.1.3`
swUnitMgmtPortRangeThis object indicates the total ports of this unit.ro INTEGER `.1.3.6.1.4.1.171.12.11.1.9.4.1.4`	INTEGER	`.1.3.6.1.4.1.171.12.11.1.9.4.1.4`
swUnitMgmtFrontPanelLedStatusThis object is a set of system LED indications. The first three octets is defined as system LED. The first LED is power LED. The second LED is console LED. The third LED is RPS (Redundancy Power Supply) LED. The other octets following the second octets are the logical port LED (following dot1dBasePort ordering). One byte is presented to one port and this byte is presentd to the Link/Activity LED. Link/Activity LED : The most significant bit is used for blink/solid: 8 = The LED blinks. The second significant bit is used for link status: 1 = link fail. 2 = link pass. The four remaining bits are currently unused and must be 0.ro OCTET STRING `.1.3.6.1.4.1.171.12.11.1.9.4.1.5`	OCTET STRING	`.1.3.6.1.4.1.171.12.11.1.9.4.1.5`
swUnitMgmtCtrlModeThis object indicates the stack mode that user configed for this unit. The object only can be configed when the device is stand alone. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. auto(2) - the system will auto assign this stack role of this unit to be stand-alone(3), master(4), or slave(5). stand-alone(3) - the unit is forced to stand alone. master(4) - the unit is forced to master. If this unit is seleted to be master, it can modify the configuration of the stacking system. slave(5) - the unit is forced to slave. If this unit is seleted to be slave, it only can view the configuration of the stacking system.rw Enumeration `.1.3.6.1.4.1.171.12.11.1.9.4.1.6`	Enumeration	`.1.3.6.1.4.1.171.12.11.1.9.4.1.6`
swUnitMgmtCurrentModeThe current stack role of this unit.ro Enumeration `.1.3.6.1.4.1.171.12.11.1.9.4.1.7`	Enumeration	`.1.3.6.1.4.1.171.12.11.1.9.4.1.7`
swUnitMgmtVersionThis object indicates the version of this stacking unit.ro DisplayString `.1.3.6.1.4.1.171.12.11.1.9.4.1.8`	DisplayString	`.1.3.6.1.4.1.171.12.11.1.9.4.1.8`
swUnitMgmtModuleNameA textual string containing module name of the stacking unit.ro DisplayString `.1.3.6.1.4.1.171.12.11.1.9.4.1.9`	DisplayString	`.1.3.6.1.4.1.171.12.11.1.9.4.1.9`
swDlinkEquipmentNotify OBJECT IDENTIFIER `.1.3.6.1.4.1.171.12.11.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.171.12.11.2`
swEquipmentNotification OBJECT IDENTIFIER `.1.3.6.1.4.1.171.12.11.2.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.171.12.11.2.2`
swEquipPowerNotification OBJECT IDENTIFIER `.1.3.6.1.4.1.171.12.11.2.2.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.171.12.11.2.2.2`
swEquipPowerNotifyPerfix OBJECT IDENTIFIER `.1.3.6.1.4.1.171.12.11.2.2.2.0`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.171.12.11.2.2.2.0`
swPowerFailurePower Failure notification. NOTIFICATION-TYPE `.1.3.6.1.4.1.171.12.11.2.2.2.0.2`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.171.12.11.2.2.2.0.2`
swPowerRecoverPower Recover notification. NOTIFICATION-TYPE `.1.3.6.1.4.1.171.12.11.2.2.2.0.3`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.171.12.11.2.2.2.0.3`
swNotificationBindings OBJECT IDENTIFIER `.1.3.6.1.4.1.171.12.11.2.3`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.171.12.11.2.3`