DLINK-3100-rndMng
AI MIB Summary
The DLINK-3100-rndMng module provides vendor-specific SNMP access for D-Link RND series switches to monitor general management parameters, including device status, interface statistics, and system resource utilization. This private MIB extension enables network administrators to retrieve operational metrics and configuration details specific to the RND platform that are not covered by standard MIBs.
The private MIB module definition for RND general management MIB.
Main OID:
rndMng.1.3.6.1.4.1.171.10.94.89.89.1
28
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
28 total| Object Name |
|---|
rndMngThe private MIB module definition for RND general management MIB. MODULE-IDENTITY .1.3.6.1.4.1.171.10.94.89.89.1 |
rndSysIdIdentification of an RND device. The device type for each integer clarifies the sysObjectID in MIB - II.ro INTEGER .1.3.6.1.4.1.171.10.94.89.89.1.1 |
rndActionThis variable enables the operator to perform one of the specified actions on the tables maintained by the network device. Send actions require support of proprietery File exchange protocol.rw Enumeration .1.3.6.1.4.1.171.10.94.89.89.1.2 |
rndFileNameThe name of the file used internally by RND for transferring tables maintained by network devices, using a prorietary File exchange protocol.rw OCTET STRING -- SIZE 256 .1.3.6.1.4.1.171.10.94.89.89.1.3 |
rlSnmpVersionSupportedIndicates the snmp versions that are supported by this device.ro OCTET STRING .1.3.6.1.4.1.171.10.94.89.89.1.4 |
rlSnmpMibVersionIndicates the snmp support version that is supported by this device.ro INTEGER .1.3.6.1.4.1.171.10.94.89.89.1.5 |
rlCpuUtilEnableEnables measurement of the device CPU utilization. In order to get real values for rlCpuUtilDuringLastSecond, rlCpuUtilDuringLastMinute and rlCpuUtilDuringLast5Minutes, the value of this object must be true.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.1.6 |
rlCpuUtilDuringLastSecondPercentage of the device CPU utilization during last second. The value 101 is a dummy value, indicating that the CPU utilization was not measured (since measurement is disabled or was disabled during last second).ro INTEGER .1.3.6.1.4.1.171.10.94.89.89.1.7 |
rlCpuUtilDuringLastMinutePercentage of the device CPU utilization during last minute. The value 101 is a dummy value, indicating that the CPU utilization was not measured (since measurement is disabled or was disabled during last minute).ro INTEGER .1.3.6.1.4.1.171.10.94.89.89.1.8 |
rlCpuUtilDuringLast5MinutesPercentage of the device CPU utilization during the last 5 minutes. The value 101 is a dummy value, indicating that the CPU utilization was not measured (since measurement is disabled or was disabled during last 5 minutes).ro INTEGER .1.3.6.1.4.1.171.10.94.89.89.1.9 |
rlRebootDelaySetting the variable will cause the device to reboot rlRebootDelay timeticks from the moment this variable was set. If not set, the variable will return a value of 4294967295. If set to 4294967295, reboot action is cancelled. The maximum delay is set by the host parameter: reboot_delay_maxrw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.171.10.94.89.89.1.10 |
rlGroupManagement OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.94.89.89.1.11 |
rlGroupMngQuerySetting value query will cause the device to query for UPNP devices on the network. The device will always return value idle for GET.rw Enumeration .1.3.6.1.4.1.171.10.94.89.89.1.11.1 |
rlGroupMngQueryPeriodSets desired interval between queries for UPNP devices on the network. Setting 0 will result in no such query. Note that the actual query interval might be less than the set value if another application running in the device requested a shorter interval. Likewise setting 0 will not necessarily stop periodic queries if another application is still interested in periodic polling.rw INTEGER UNITS "seconds" .1.3.6.1.4.1.171.10.94.89.89.1.11.2 |
rlGroupMngLastUpdateThe last time rlGroupMng MIB was updated.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.171.10.94.89.89.1.11.3 |
rlGroupMngDevicesTableThe table showing the discovered devices. SEQUENCE OF RlGroupMngDeviceEntry .1.3.6.1.4.1.171.10.94.89.89.1.11.4 |
rlGroupMngDeviceEntryThe row definition for this table. RlGroupMngDeviceEntry .1.3.6.1.4.1.171.10.94.89.89.1.11.4.1 |
rlGroupMngDeviceIdTypeThe IP address type of the discovered device InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.94.89.89.1.11.4.1.1 |
rlGroupMngDeviceIdThe IP address of the discovered device InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.94.89.89.1.11.4.1.2 |
rlGroupMngSubdeviceA subdevice within the rlGroupMngDeviceId. Only subdevices with greatest specifity will be kept (specific UUID device is more specific than basic device which is in turn more specific than root device. INTEGER .1.3.6.1.4.1.171.10.94.89.89.1.11.4.1.3 |
rlGroupMngDeviceDescriptionThe discovery protocol description of the device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.1.11.4.1.4 |
rlGroupMngGroupMngEnabledIndicates whether the device has Group Management enable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.1.11.4.1.5 |
rlGroupMngGroupLLDPDeviceIdThe LLDP device id. If it is empty the device id is not known (either it is a non-MTS device or a non-LLDP supporting MTS device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.1.11.4.1.6 |
rlGroupMngDeviceVendorThe vendor of the device. If empty the vendor is not known.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.1.11.4.1.7 |
rlGroupMngDeviceAdvertisedCachingTimeThe caching time advertised by the device. If no update for this device has been received during this caching time the system will assume that the device has left the network and will therefore remove its entry from the table.ro INTEGER UNITS "seconds" .1.3.6.1.4.1.171.10.94.89.89.1.11.4.1.8 |
rlGroupMngDeviceLocationURLThe URL inidicating the location of the XML presenting the details of the device.ro DisplayString UNITS "seconds" .1.3.6.1.4.1.171.10.94.89.89.1.11.4.1.9 |
rlGroupMngDeviceLastSeenThe value of sysUpTime at the moment of last reception of an update for this device.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.171.10.94.89.89.1.11.4.1.10 |
rlRunningCDBequalToStartupCDBIndicates whether there are changes in running CDB that were not saved in flash.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.1.13 |