The DGS-1210-12TSME-BX MIB module provides management capabilities for the D-Link DES-1210-52ME switch, specifically enabling the monitoring and configuration of QinQ (802.1ad) VLAN encapsulation parameters, including inner tag insertion and drop counters for unmatched traffic. This module facilitates precise control over service provider bridging (SPB) operations by exposing metrics related to VLAN tag manipulation and packet discard events on the device's managed ports.

2030 objects→

DGS-1210-28XSME-BX

SNMP MIB module

2016 objects→

DGS-1210-28PME_AX

Standard SNMP MIB module defining data structures for DGS-1210-28PME_AX.

1942 objects→

DGS-1210-28ME_AX

Standard SNMP MIB module defining data structures for DGS-1210-28ME_AX.

1941 objects→

DGS-1210-20ME_AX

Standard SNMP MIB module defining data structures for DGS-1210-20ME_AX.

1941 objects→

Object Name	Syntax	OID
rlTBIMibTime Range Infrastructure MIBs initial version. MODULE-IDENTITY `.1.3.6.1.4.1.171.10.94.89.89.144`	MODULE-IDENTITY	`.1.3.6.1.4.1.171.10.94.89.89.144`
rlTBITimeRangeTableThis table specifies Time Based Infra table SEQUENCE OF RlTBITimeRangeEntry `.1.3.6.1.4.1.171.10.94.89.89.144.1`	SEQUENCE OF RlTBITimeRangeEntry	`.1.3.6.1.4.1.171.10.94.89.89.144.1`
rlTBITimeRangeEntryEach entry in this table describes the new time range for ACE. The index is time range name RlTBITimeRangeEntry `.1.3.6.1.4.1.171.10.94.89.89.144.1.1`	RlTBITimeRangeEntry	`.1.3.6.1.4.1.171.10.94.89.89.144.1.1`
rlTBITimeRangeNameName of time range. DisplayString `.1.3.6.1.4.1.171.10.94.89.89.144.1.1.1`	DisplayString	`.1.3.6.1.4.1.171.10.94.89.89.144.1.1.1`
rlTBITimeRangeAbsoluteStartTime of start of absolute time range in following format: month day year hh:mm month: 01-12 (January-December) day: 01-31 year: 0-99 (2000-2099) hh: 0-23 (hours) mm: 0-59 (minutes)rw DisplayString `.1.3.6.1.4.1.171.10.94.89.89.144.1.1.2`	DisplayString	`.1.3.6.1.4.1.171.10.94.89.89.144.1.1.2`
rlTBITimeRangeAbsoluteEndTime of end of absolute time range in following format: month day year hh:mm month: 01-12 (January-December) day: 01-31 year: 0-99 (2000-2099) hh: 0-23 (hours) mm: 0-59 (minutes)rw DisplayString `.1.3.6.1.4.1.171.10.94.89.89.144.1.1.3`	DisplayString	`.1.3.6.1.4.1.171.10.94.89.89.144.1.1.3`
rlTBITimeRangeActiveStatusShows whether the current time range is active according to the current clock.ro TruthValue (SNMPv2-TC) `.1.3.6.1.4.1.171.10.94.89.89.144.1.1.4`	TruthValue (SNMPv2-TC)	`.1.3.6.1.4.1.171.10.94.89.89.144.1.1.4`
rlTBITimeRangeRowStatusRow Status. It is used for adding/deleting entries of this table.rw RowStatus (SNMPv2-TC) `.1.3.6.1.4.1.171.10.94.89.89.144.1.1.5`	RowStatus (SNMPv2-TC)	`.1.3.6.1.4.1.171.10.94.89.89.144.1.1.5`
rlTBIPeriodicTableThis table specifies Time Based Infra Periodic table SEQUENCE OF RlTBIPeriodicEntry `.1.3.6.1.4.1.171.10.94.89.89.144.2`	SEQUENCE OF RlTBIPeriodicEntry	`.1.3.6.1.4.1.171.10.94.89.89.144.2`
rlTBIPeriodicEntryEach entry in this table describes periodic time range. RlTBIPeriodicEntry `.1.3.6.1.4.1.171.10.94.89.89.144.2.1`	RlTBIPeriodicEntry	`.1.3.6.1.4.1.171.10.94.89.89.144.2.1`
rlTBIPeriodicTimeRangeNameTime Range Name the periodic is defined on. DisplayString `.1.3.6.1.4.1.171.10.94.89.89.144.2.1.1`	DisplayString	`.1.3.6.1.4.1.171.10.94.89.89.144.2.1.1`
rlTBIPeriodicWeekDayListThe bitmap allows to user to select periodic time range for several days at once. The periodic range will be associated with specific days when corresponding bits will be set. If at least one bit has been set in the rlTBIPeriodicWeekDayList, the weekday in rlTBIPeriodicStart and rlTBIPeriodicEnd is not relevant and should be set to zero.rw RlTBIWeekDayList `.1.3.6.1.4.1.171.10.94.89.89.144.2.1.2`	RlTBIWeekDayList	`.1.3.6.1.4.1.171.10.94.89.89.144.2.1.2`
rlTBIPeriodicStartTime of start of periodic time range in following format: weekday hh:mm weekday: 0-7 (0 means the weekday is not specified, 1-7 are weekdays from Monday to Sunday) hh: 0-23 (hours) mm: 0-59 (minutes) Weekday may be 0 only if periodic time range weekdays were specified in rlTBIPeriodicWeekDayList.rw DisplayString `.1.3.6.1.4.1.171.10.94.89.89.144.2.1.3`	DisplayString	`.1.3.6.1.4.1.171.10.94.89.89.144.2.1.3`
rlTBIPeriodicEndTime of end of periodic time range in following format: weekday hh:mm weekday: 0-7 (0 means the weekday is not specified, 1-7 are weekdays from Monday to Sunday) hh: 0-23 (hours) mm: 0-59 (minutes) Weekday may be 0 only if periodic time range weekdays were specified in rlTBIPeriodicWeekDayList.rw DisplayString `.1.3.6.1.4.1.171.10.94.89.89.144.2.1.4`	DisplayString	`.1.3.6.1.4.1.171.10.94.89.89.144.2.1.4`
rlTBIPeriodicRowStatusRow Status. It is used for adding/deleting entries of this table.rw RowStatus (SNMPv2-TC) `.1.3.6.1.4.1.171.10.94.89.89.144.2.1.5`	RowStatus (SNMPv2-TC)	`.1.3.6.1.4.1.171.10.94.89.89.144.2.1.5`