DLINK-3100-POE-MIB
The private MIB module definition for Power Over Ethernet.
Main OID:
rlPoe.1.3.6.1.4.1.171.10.94.89.89.108
26
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
26 total| Object Name |
|---|
rlPoeThe private MIB module definition for Power Over Ethernet. MODULE-IDENTITY .1.3.6.1.4.1.171.10.94.89.89.108 |
rlPethPsePortTableThe table listing additional information for Power Over Ethernet ports. SEQUENCE OF RlPethPsePortEntry .1.3.6.1.4.1.171.10.94.89.89.108.1 |
rlPethPsePortEntryAn entry in the rlPethPsePortTable. RlPethPsePortEntry .1.3.6.1.4.1.171.10.94.89.89.108.1.1 |
rlPethPsePortGroupIndexThis variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices. Furthermore, the same value MUST be used in this variable, pethMainPseGroupIndex, and pethNotificationControlGroupIndex to refer to a given box in a stack or module in the rack.rw INTEGER .1.3.6.1.4.1.171.10.94.89.89.108.1.1.1 |
rlPethPsePortIndexThis variable uniquely identifies the power Ethernet PSE port within group pethPsePortGroupIndex to which the power Ethernet PSE entry is connected.rw INTEGER .1.3.6.1.4.1.171.10.94.89.89.108.1.1.2 |
rlPethPsePortOutputVoltageThis variable indicates on the output voltage level in milli volts from rlPethPsePortIndex.ro INTEGER .1.3.6.1.4.1.171.10.94.89.89.108.1.1.3 |
rlPethPsePortOutputCurrentThis variable indicates on the output current level in milli amper from rlPethPsePortIndex.ro INTEGER .1.3.6.1.4.1.171.10.94.89.89.108.1.1.4 |
rlPethPsePortOutputPowerThis variable indicates on the output power level in milli watts from rlPethPsePortIndex.ro INTEGER .1.3.6.1.4.1.171.10.94.89.89.108.1.1.5 |
rlPethPsePortPowerLimitThis variable indicates on the maximum power level in milli watts which is available from rlPethPsePortIndex.rw INTEGER .1.3.6.1.4.1.171.10.94.89.89.108.1.1.6 |
rlPethPsePortStatusThis variable indicates on the hardware status of rlPethPsePortIndex.ro INTEGER .1.3.6.1.4.1.171.10.94.89.89.108.1.1.7 |
rlPethPsePortTimeRangeNameThis variable is used to bind PoE port to time range.rw DisplayString .1.3.6.1.4.1.171.10.94.89.89.108.1.1.8 |
rlPethPsePortOperStatusThis Read-Only variable indicates PoE port current status affected by time range active/inactive and admin status.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.108.1.1.9 |
rlPethMainPseTableThe table listing additional read - only information for Power Over Ethernet. SEQUENCE OF RlPethMainPseEntry .1.3.6.1.4.1.171.10.94.89.89.108.2 |
rlPethMainPseEntryAn entry in the rlPethMainPseTable. RlPethMainPseEntry .1.3.6.1.4.1.171.10.94.89.89.108.2.1 |
rlPethMainPseGroupIndexThis variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices. Furthermore, the same value MUST be used in this variable, pethMainPseGroupIndex, and pethNotificationControlGroupIndex to refer to a given box in a stack or module in the rack. INTEGER .1.3.6.1.4.1.171.10.94.89.89.108.2.1.1 |
rlPethMainPseSwVersionThis variable identifies the MCU SW version.ro DisplayString .1.3.6.1.4.1.171.10.94.89.89.108.2.1.2 |
rlPethMainPseHwVersionThis variable identifies the MCU HW version.ro DisplayString .1.3.6.1.4.1.171.10.94.89.89.108.2.1.3 |
rlPethMainPseHwTypeThis variable identifies the MCU HW type (enhanced, plus, none).ro Enumeration .1.3.6.1.4.1.171.10.94.89.89.108.2.1.4 |
rlPethMainPsePowerGuardBandThis variable identifies the guard band in [W] for not connecting additional ports.ro INTEGER .1.3.6.1.4.1.171.10.94.89.89.108.2.1.5 |
rlPethPowerPseTableThe table listing additional read-write information for Power Over Ethernet. SEQUENCE OF RlPethPowerPseEntry .1.3.6.1.4.1.171.10.94.89.89.108.3 |
rlPethPowerPseEntryAn entry in the rlPethPowerPseTable. RlPethPowerPseEntry .1.3.6.1.4.1.171.10.94.89.89.108.3.1 |
rlPethPowerPseGroupIndexThis variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices. Furthermore, the same value MUST be used in this variable, PethPowerPseGroupIndex, and pethNotificationControlGroupIndex to refer to a given box in a stack or module in the rack. INTEGER .1.3.6.1.4.1.171.10.94.89.89.108.3.1.1 |
rlPethPowerPsePowerThis variable identifies the maximum power in [W] supplied by PSE.rw Enumeration .1.3.6.1.4.1.171.10.94.89.89.108.3.1.2 |
rlPethPowerPseRpsPowerThis variable identifies the maximum power in [W] supplied by PSE + RPS.rw Enumeration .1.3.6.1.4.1.171.10.94.89.89.108.3.1.3 |
rlPethPowerPsePowerManagementModeThis variable identifies power management mode.rw Enumeration .1.3.6.1.4.1.171.10.94.89.89.108.3.1.4 |
rlPethPowerPsedisconnectMethodThis variable identifies disconnect method.rw Enumeration .1.3.6.1.4.1.171.10.94.89.89.108.3.1.5 |