DLGSRPRF-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
29
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
29 total| Object Name |
|---|
dlgPiSram OBJECT IDENTIFIER .1.3.6.1.4.1.3028.1.2.1 |
dlgPsStatsEnableMaskStatistics Collection Enable mask. This mask enables or disables all statistics defined in this MIB. 0 - Disables statistics collection. 1 - Enables statistics collection. 2 - Clear existing statistics (resets all stats to zero) Default value is 1 - statistics collection enabledrw INTEGER .1.3.6.1.4.1.3028.1.2.1.1 |
dlgPsPollingIntervalThe Agent's polling interval in seconds. This is the length of time that the Agent will keeps stats within the Current Stats group. By default, this value is 3600 seconds (1 hour). At the end of each interval the statistics are reset to zero and the counters begin counting up again. The dlgPsElapsedTime variable provides an indication how long into the current interval the agent has been collecting statistics.rw INTEGER .1.3.6.1.4.1.3028.1.2.1.2 |
dlgPsElapsedTimeNumber of Elapsed seconds since the start of the current polling interval.ro INTEGER .1.3.6.1.4.1.3028.1.2.1.3 |
dlgPsCurrentStats OBJECT IDENTIFIER .1.3.6.1.4.1.3028.1.2.1.4 |
dlgPsCurrentInterruptsNumber of hardware interrupts generated by Span or D4x based boards for the current interval.ro Counter .1.3.6.1.4.1.3028.1.2.1.4.1 |
dlgPsCurrentDrvCommandsNumber of commands sent to the driver for the current interval.ro Counter .1.3.6.1.4.1.3028.1.2.1.4.2 |
dlgPsCurrentFWCommandsNumber of commands sent to the Firmware for the current interval.ro Counter .1.3.6.1.4.1.3028.1.2.1.4.3 |
dlgPsCurrentUnSolEventsNumber of unsolicited events from the Firmware for the current interval.ro Counter .1.3.6.1.4.1.3028.1.2.1.4.4 |
dlgPsCurrentBytesReadNumber of bytes read from the Firmware during record for the current interval.ro Counter .1.3.6.1.4.1.3028.1.2.1.4.5 |
dlgPsCurrentBytesWrittenNumber of bytes written to the Firmware during playback for the current interval.ro Counter .1.3.6.1.4.1.3028.1.2.1.4.6 |
dlgPsCurrentLostMsgToFWNumber of lost messages (commands) to the Firmware for the current interval. This value should always be zero. A non zero value typically indicates a Firmware or hardware failure.ro Counter .1.3.6.1.4.1.3028.1.2.1.4.7 |
dlgPsCurrentLostMsgFromFWNumber of lost messages (events) from the Firmware for the current interval. This value should typically be zero. A non zero value indicates the host cannot service all the messages being generated by the firmware.ro Counter .1.3.6.1.4.1.3028.1.2.1.4.8 |
dlgPsCurrentFWErrorMsgsNumber of error message packets generated by the Firmware for the current interval. This should typically be zero.ro Counter .1.3.6.1.4.1.3028.1.2.1.4.9 |
dlgPsCurrentDrvErrorMsgsNumber of error message packets generated by the Driver for the current interval. This should tpyically be zero.ro Counter .1.3.6.1.4.1.3028.1.2.1.4.10 |
dlgPsTotalStats OBJECT IDENTIFIER .1.3.6.1.4.1.3028.1.2.1.5 |
dlgPsTotalInterruptsTotal Number of hardware interrupts generated by the Span or D4x based boards.ro Counter .1.3.6.1.4.1.3028.1.2.1.5.1 |
dlgPsTotalDrvCommandsTotal Number of commands sent to the driver.ro Counter .1.3.6.1.4.1.3028.1.2.1.5.2 |
dlgPsTotalFWCommandsTotal Number of commands sent to the Firmware.ro Counter .1.3.6.1.4.1.3028.1.2.1.5.3 |
dlgPsTotalUnSolEventsTotal Number of unsolicited events from the Firmware.ro Counter .1.3.6.1.4.1.3028.1.2.1.5.4 |
dlgPsTotalBytesReadTotal Number of bytes Read from the Firmware during record.ro Counter .1.3.6.1.4.1.3028.1.2.1.5.5 |
dlgPsTotalBytesWrittenTotal Number of bytes written to the Firmware during playback.ro Counter .1.3.6.1.4.1.3028.1.2.1.5.6 |
dlgPsTotalLostMsgToFWTotal Number of lost messages (commands) to the Firmware. This value should always be zero. A non zero value typically indicates a Firmware or Hardware failure.ro Counter .1.3.6.1.4.1.3028.1.2.1.5.7 |
dlgPsTotalLostMsgFromFWTotal Number of lost messages (events) from the Firmware. This value should typically be zero. A non zero value indicates the host cannot service all the messages being generated by the firmware.ro Counter .1.3.6.1.4.1.3028.1.2.1.5.8 |
dlgPsTotalFWErrorMsgsTotal Number of error message packets gernerated by the Firmware. This should typically be zero.ro Counter .1.3.6.1.4.1.3028.1.2.1.5.9 |
dlgPsTotalDrvErrorMsgsTotal Number of error message packets generated by the Driver. This should typically be zero.ro Counter .1.3.6.1.4.1.3028.1.2.1.5.10 |
dlgPiSramMibRev OBJECT IDENTIFIER .1.3.6.1.4.1.3028.1.2.1.6 |
dlgPiSramMibRevMajorThe Major Revision level. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level may indicate a significant change in the information supported and/or the meaning of the supported information, correct interpretation of data may require a MIB document with the same major revision level.ro INTEGER .1.3.6.1.4.1.3028.1.2.1.6.1 |
dlgPiSramMibRevMinorThe Minor Revision level. A change in the minor revision level may represent some minor additional support. no changes to any pre-existing information has occurred.ro INTEGER .1.3.6.1.4.1.3028.1.2.1.6.2 |