DHCP-Server-MIB
The structure of DHCP Server management for the proprietary enterprise.
Main OID:
swDHCPServerMIB.1.3.6.1.4.1.171.12.38
113
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
113 total| Object Name |
|---|
swDHCPServerMIBThe structure of DHCP Server management for the proprietary enterprise. MODULE-IDENTITY .1.3.6.1.4.1.171.12.38 |
swDHCPServerCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.171.12.38.1 |
swDHCPServerStateThis object enables/disables the DHCP server status of the device.rw Enumeration .1.3.6.1.4.1.171.12.38.1.1 |
swDHCPServerPingPktNumberThis object specifies the number of ping packets the DHCP server sends to an IP address before assigning this address to a requesting client. 0 means no ping test.rw INTEGER .1.3.6.1.4.1.171.12.38.1.2 |
swDHCPServerPingTimeOutThis object specifies the amount of time in millisecond the DHCP server must wait before timing out a ping packet.rw INTEGER .1.3.6.1.4.1.171.12.38.1.3 |
swDHCPServerLogStateThis object enables/disables the DHCP server log status of the device.rw Enumeration .1.3.6.1.4.1.171.12.38.1.4 |
swDHCPServerInfo OBJECT IDENTIFIER .1.3.6.1.4.1.171.12.38.2 |
swDHCPServerMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.12.38.3 |
swDHCPServerExcludedAddressTableA table that contains an IP addresses group that the DHCP server should not assign to DHCP client. SEQUENCE OF SwDHCPServerExcludedAddressEntry .1.3.6.1.4.1.171.12.38.3.1 |
swDHCPServerExcludedAddressEntryA group of IP addresses that the DHCP server should not assign to DHCP client. SwDHCPServerExcludedAddressEntry .1.3.6.1.4.1.171.12.38.3.1.1 |
swDHCPServerExcludedAddressBeginThe start address of this address range.ro IpAddress .1.3.6.1.4.1.171.12.38.3.1.1.1 |
swDHCPServerExcludedAddressEndThe end address of this address range.ro IpAddress .1.3.6.1.4.1.171.12.38.3.1.1.2 |
swDHCPServerExcludedAddressStatusThis object manages this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.12.38.3.1.1.3 |
swDHCPServerPoolMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.12.38.3.2 |
swDHCPServerPoolTableA table that contains DHCP server pool information. SEQUENCE OF SwDHCPServerPoolEntry .1.3.6.1.4.1.171.12.38.3.2.1 |
swDHCPServerPoolEntryA list of DHCP server pool information. SwDHCPServerPoolEntry .1.3.6.1.4.1.171.12.38.3.2.1.1 |
swDHCPServerPoolNameThe name of this pool entry.ro DisplayString .1.3.6.1.4.1.171.12.38.3.2.1.1.1 |
swDHCPServerPoolNetworkAddressThe network address of this DHCP pool entry.rw IpAddress .1.3.6.1.4.1.171.12.38.3.2.1.1.2 |
swDHCPServerPoolNetworkAddressMaskThe network address mask of this DHCP pool entry.rw IpAddress .1.3.6.1.4.1.171.12.38.3.2.1.1.3 |
swDHCPServerPoolDomainNameThe domain name for the client if the server allocates the address for the client from this pool.rw DisplayString .1.3.6.1.4.1.171.12.38.3.2.1.1.4 |
swDHCPServerPoolNetBIOSNodeTypeThe NetBIOS node type for a Microsoft DHCP client.rw Enumeration .1.3.6.1.4.1.171.12.38.3.2.1.1.5 |
swDHCPServerPoolLeaseStateThe pool lease state. When configured to infinity, the following nodes include swDHCPServerPoolLeaseDay, swDHCPServerPoolLeaseHour and swDHCPServerPoolLeaseMinute have no significance any more.rw Enumeration .1.3.6.1.4.1.171.12.38.3.2.1.1.6 |
swDHCPServerPoolLeaseDayThe day of the lease.rw INTEGER .1.3.6.1.4.1.171.12.38.3.2.1.1.7 |
swDHCPServerPoolLeaseHourThe hour of the lease.rw INTEGER .1.3.6.1.4.1.171.12.38.3.2.1.1.8 |
swDHCPServerPoolLeaseMinuteThe minute of the lease.rw INTEGER .1.3.6.1.4.1.171.12.38.3.2.1.1.9 |
swDHCPServerPoolBootFileThe name of the file that is used as a boot image.rw DisplayString .1.3.6.1.4.1.171.12.38.3.2.1.1.10 |
swDHCPServerPoolNextServerThe next server to be used in the DHCP client boot process.rw IpAddress .1.3.6.1.4.1.171.12.38.3.2.1.1.11 |
swDHCPServerPoolStatusThis object manages this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.12.38.3.2.1.1.12 |
swDHCPServerPoolOption43ValueThe value of DHCP server option 43.rw DisplayString .1.3.6.1.4.1.171.12.38.3.2.1.1.13 |
swDHCPServerPoolVRFNameThe name of virtual routing and forwarding(VRF). Use 'reserved' for global address space.rw DisplayString .1.3.6.1.4.1.171.12.38.3.2.1.1.14 |
swDHCPServerDNSServerAddressTableA table that contains the IP address of a DNS server that is available to a DHCP client. SEQUENCE OF SwDHCPServerDNSServerAddressEntry .1.3.6.1.4.1.171.12.38.3.2.2 |
swDHCPServerDNSServerAddressEntryA list of DNS server information. SwDHCPServerDNSServerAddressEntry .1.3.6.1.4.1.171.12.38.3.2.2.1 |
swDHCPServerDNSServerPoolNameThe pool name of this entry.ro DisplayString .1.3.6.1.4.1.171.12.38.3.2.2.1.1 |
swDHCPServerDNSServerAddressIndexThe DNS server address number.ro INTEGER .1.3.6.1.4.1.171.12.38.3.2.2.1.2 |
swDHCPServerDNSServerAddressThe IP address of a DNS server that is available to a DHCP client.rw IpAddress .1.3.6.1.4.1.171.12.38.3.2.2.1.3 |
swDHCPServerDNSServerAddressStatusThis object manages this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.12.38.3.2.2.1.4 |
swDHCPServerNetBIOSNameServerTableA table containing the NetBIOS WINS server address information that is available to a Microsoft DHCP client. SEQUENCE OF SwDHCPServerNetBIOSNameServerEntry .1.3.6.1.4.1.171.12.38.3.2.3 |
swDHCPServerNetBIOSNameServerEntryA list of NetBIOS WINS server infomation. SwDHCPServerNetBIOSNameServerEntry .1.3.6.1.4.1.171.12.38.3.2.3.1 |
swDHCPServerNetBIOSNameServerPoolNameThe pool name of this entry.ro DisplayString .1.3.6.1.4.1.171.12.38.3.2.3.1.1 |
swDHCPServerNetBIOSNameServerIndexThe NetBIOS WINS server number.ro INTEGER .1.3.6.1.4.1.171.12.38.3.2.3.1.2 |
swDHCPServerNetBIOSNameServerThe NetBIOS WINS server that is available to a DHCP client.rw IpAddress .1.3.6.1.4.1.171.12.38.3.2.3.1.3 |
swDHCPServerNetBIOSNameServerStatusThis object manages this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.12.38.3.2.3.1.4 |
swDHCPServerDefaultRouterTableA table that contains the IP address of the default router for a DHCP client. SEQUENCE OF SwDHCPServerDefaultRouterEntry .1.3.6.1.4.1.171.12.38.3.2.4 |
swDHCPServerDefaultRouterEntryA list of default router information. SwDHCPServerDefaultRouterEntry .1.3.6.1.4.1.171.12.38.3.2.4.1 |
swDHCPServerDefaultRouterPoolNameThe pool name of this entry.ro DisplayString .1.3.6.1.4.1.171.12.38.3.2.4.1.1 |
swDHCPServerDefaultRouterIndexThe default router index.ro INTEGER .1.3.6.1.4.1.171.12.38.3.2.4.1.2 |
swDHCPServerDefaultRouterThe address of the default router for a DHCP client.rw IpAddress .1.3.6.1.4.1.171.12.38.3.2.4.1.3 |
swDHCPServerDefaultRouterStatusThis object manages this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.12.38.3.2.4.1.4 |
swDHCPServerPoolClassTableA table that contains DHCP pool class. SEQUENCE OF SwDHCPServerPoolClassEntry .1.3.6.1.4.1.171.12.38.3.2.5 |
swDHCPServerPoolClassEntryBy using DHCP class, DHCP server using option to further determine which IP addresses to allocate to clients. SwDHCPServerPoolClassEntry .1.3.6.1.4.1.171.12.38.3.2.5.1 |
swDHCPServerPoolClassPoolNameThe pool name of this entry. DisplayString .1.3.6.1.4.1.171.12.38.3.2.5.1.1 |
swDHCPServerPoolClassNameDHCP class's name. DisplayString .1.3.6.1.4.1.171.12.38.3.2.5.1.2 |
swDHCPServerPoolClassAddressBeginThe start address of this class address range.rw IpAddress .1.3.6.1.4.1.171.12.38.3.2.5.1.3 |
swDHCPServerPoolClassAddressEndThe end address of this class address range.rw IpAddress .1.3.6.1.4.1.171.12.38.3.2.5.1.4 |
swDHCPServerPoolClassRowStatusThis object manages this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.12.38.3.2.5.1.5 |
swDHCPServerPoolOptionTableThis table associate DHCP option profile with DHCP server pool. SEQUENCE OF SwDHCPServerPoolOptionEntry .1.3.6.1.4.1.171.12.38.3.2.6 |
swDHCPServerPoolOptionEntryA list of information indicates the current DHCP option profile associate with DHCP server pool. SwDHCPServerPoolOptionEntry .1.3.6.1.4.1.171.12.38.3.2.6.1 |
swDHCPServerPoolOptionRowStatusThis object manages this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.12.38.3.2.6.1.1 |
swDHCPServerManualBindingTableA table that contains information regarding the binding of a pool of IP addresses to a DHCP server. SEQUENCE OF SwDHCPServerManualBindingEntry .1.3.6.1.4.1.171.12.38.3.3 |
swDHCPServerManualBindingEntryA list of manual pool binding. SwDHCPServerManualBindingEntry .1.3.6.1.4.1.171.12.38.3.3.1 |
swDHCPServerManualBindingPoolNameThe pool name of this entry.ro DisplayString .1.3.6.1.4.1.171.12.38.3.3.1.1 |
swDHCPServerManualBindingIpAddressIP address which will be assigned to specified client.ro IpAddress .1.3.6.1.4.1.171.12.38.3.3.1.2 |
swDHCPServerManualBindingHardwareAddressThe MAC address of a client.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.12.38.3.3.1.3 |
swDHCPServerManualBindingTypeThe type of this manual binding. both(3): The client type has no significance, the entry could apply to either one.rw Enumeration .1.3.6.1.4.1.171.12.38.3.3.1.4 |
swDHCPServerManualBindingStatusThis object manages this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.12.38.3.3.1.5 |
swDHCPServerBindingTableA table that contains information regarding dynamic binding information of a pool of IP addresses. SEQUENCE OF SwDHCPServerBindingEntry .1.3.6.1.4.1.171.12.38.3.4 |
swDHCPServerBindingEntryA pool of IP addresses that are listed as bound to a DHCP server. SwDHCPServerBindingEntry .1.3.6.1.4.1.171.12.38.3.4.1 |
swDHCPServerBindingPoolNameThe name of this pool entry.ro DisplayString .1.3.6.1.4.1.171.12.38.3.4.1.1 |
swDHCPServerBindingIpAddressIP addresses which have been assigned to a specified client.ro IpAddress .1.3.6.1.4.1.171.12.38.3.4.1.2 |
swDHCPServerBindingHardwareAddressThe MAC address of a client.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.12.38.3.4.1.3 |
swDHCPServerBindingTypeThe type of this binding.ro Enumeration .1.3.6.1.4.1.171.12.38.3.4.1.4 |
swDHCPServerBindingStatusThe status of this binding.ro Enumeration .1.3.6.1.4.1.171.12.38.3.4.1.5 |
swDHCPServerBindingLifeTimeThe life time of the binding entry in seconds. The value '-1' means an infinite life time.ro INTEGER .1.3.6.1.4.1.171.12.38.3.4.1.6 |
swDHCPServerBindingClearStateThis object is used to clear this entry.rw Enumeration .1.3.6.1.4.1.171.12.38.3.4.1.7 |
swDHCPServerConflictIPTableA table that contains DHCP address conflicts. SEQUENCE OF SwDHCPServerConflictIPEntry .1.3.6.1.4.1.171.12.38.3.5 |
swDHCPServerConflictIPEntryA DHCP address conflict means a duplication of use of the same IP address by two hosts. SwDHCPServerConflictIPEntry .1.3.6.1.4.1.171.12.38.3.5.1 |
swDHCPServerConflictIPIPAddressIP address which is duplicated and used by two hosts.ro IpAddress .1.3.6.1.4.1.171.12.38.3.5.1.1 |
swDHCPServerConflictIPDetectionMethodThe server detects conflicts using ping. The client detects conflicts using gratuitous Address Resolution Protocol (ARP).ro Enumeration .1.3.6.1.4.1.171.12.38.3.5.1.2 |
swDHCPServerConflictIPDetectionTimeThe time at which a DHCP address conflict happens.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.12.38.3.5.1.3 |
swDHCPServerConflictIPClearStateThis object is used to clear this entry.rw Enumeration .1.3.6.1.4.1.171.12.38.3.5.1.4 |
swDHCPServerClass OBJECT IDENTIFIER .1.3.6.1.4.1.171.12.38.3.6 |
swDHCPServerClassStateThis object enables/disables the DHCP class of the device.rw Enumeration .1.3.6.1.4.1.171.12.38.3.6.1 |
swDHCPServerClassTableThis table indicates the current DHCP class configurations. SEQUENCE OF SwDHCPServerClassEntry .1.3.6.1.4.1.171.12.38.3.6.2 |
swDHCPServerClassEntryA list of information indicates the current DHCP class option configurations. SwDHCPServerClassEntry .1.3.6.1.4.1.171.12.38.3.6.2.1 |
swDHCPServerClassNameDHCP class's name. DisplayString .1.3.6.1.4.1.171.12.38.3.6.2.1.1 |
swDHCPServerClassOptionDHCP server class configured options. Now, it only supports option 60, 61, 82 and 125. 60: vendor class identifier; 61: client-identifier; 82: relay agent information option; 125: vendor-identifying vendor-specific information. INTEGER .1.3.6.1.4.1.171.12.38.3.6.2.1.2 |
swDHCPServerClassOptionTypeThis object indicates the type of option. string(1): Means the type of option value is character string, it depends on swDHCPServerClassOptionValue. hex(2): Means the type of option value is hexadecimal, it depends on swDHCPServerClassOptionValue.rw Enumeration .1.3.6.1.4.1.171.12.38.3.6.2.1.3 |
swDHCPServerClassOptionValueThis object indicates the value of this option.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.12.38.3.6.2.1.4 |
swDHCPServerClassOptionRowStatusThis object manages this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.12.38.3.6.2.1.5 |
swDHCPServerVRFExcludedAddressTableA table that contains an IP addresses group that the DHCP server should not assign to DHCP client for VRF lite. SEQUENCE OF SwDHCPServerVRFExcludedAddressEntry .1.3.6.1.4.1.171.12.38.3.7 |
swDHCPServerVRFExcludedAddressEntryA group of IP addresses that the DHCP server should not assign to DHCP client for VRF lite. SwDHCPServerVRFExcludedAddressEntry .1.3.6.1.4.1.171.12.38.3.7.1 |
swDHCPServerVRFExcludedAddressVRFNameThe name of virtual routing and forwarding(VRF). Use 'reserved' for global address space. DisplayString .1.3.6.1.4.1.171.12.38.3.7.1.1 |
swDHCPServerVRFExcludedAddressBeginThe start address of this address range. IpAddress .1.3.6.1.4.1.171.12.38.3.7.1.2 |
swDHCPServerVRFExcludedAddressEndThe end address of this address range. IpAddress .1.3.6.1.4.1.171.12.38.3.7.1.3 |
swDHCPServerVRFExcludedAddressStatusThis object manages this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.12.38.3.7.1.4 |
swDHCPServerVRFConflictIPEntryTableA table that contains DHCP address conflicts for VRF lite. SEQUENCE OF SwDHCPServerVRFConflictIPEntryEntry .1.3.6.1.4.1.171.12.38.3.8 |
swDHCPServerVRFConflictIPEntryEntryA DHCP address conflict means a duplication of use of the same IP address by two hosts. SwDHCPServerVRFConflictIPEntryEntry .1.3.6.1.4.1.171.12.38.3.8.1 |
swDHCPServerVRFConflictIPEntryVRFNameThe name of virtual routing and forwarding(VRF). Use 'reserved' for global address space. DisplayString .1.3.6.1.4.1.171.12.38.3.8.1.1 |
swDHCPServerVRFConflictIPEntryIPAddressIP address which is duplicated and used by two hosts. IpAddress .1.3.6.1.4.1.171.12.38.3.8.1.2 |
swDHCPServerVRFConflictIPEntryDetectionMethodThe server detects conflicts using ping. The client detects conflicts using gratuitous Address Resolution Protocol (ARP).ro Enumeration .1.3.6.1.4.1.171.12.38.3.8.1.3 |
swDHCPServerVRFConflictIPEntryDetectionTimeThe time at which a DHCP address conflict happens.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.12.38.3.8.1.4 |
swDHCPServerVRFConflictIPEntryClearStateThis object is used to clear this entry.rw Enumeration .1.3.6.1.4.1.171.12.38.3.8.1.5 |
swDHCPServerOptionProfile OBJECT IDENTIFIER .1.3.6.1.4.1.171.12.38.3.9 |
swDHCPServerProfileTableThis table manage DHCP server option profile. SEQUENCE OF SwDHCPServerProfileEntry .1.3.6.1.4.1.171.12.38.3.9.1 |
swDHCPServerProfileEntryA list of information indicates the current DHCP option profile. SwDHCPServerProfileEntry .1.3.6.1.4.1.171.12.38.3.9.1.1 |
swDHCPServerProfileNameDHCP option profile name. DisplayString .1.3.6.1.4.1.171.12.38.3.9.1.1.1 |
swDHCPServerProfileRowStatusThis object manages this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.12.38.3.9.1.1.2 |
swDHCPServerOptionTableThis table indicates the current DHCP option profile configurations. SEQUENCE OF SwDHCPServerOptionEntry .1.3.6.1.4.1.171.12.38.3.9.2 |
swDHCPServerOptionEntryA list of information indicates the current DHCP option profile configurations. SwDHCPServerOptionEntry .1.3.6.1.4.1.171.12.38.3.9.2.1 |
swDHCPServerOptionCodeDHCP server option profile configured options. Must not configure follow: 53:DHCP Message Type 54:Server Identifier Should not configure follow optoin that can configure through swDHCPServerPoolTable: 1:Subnet Mask (swDHCPServerPoolNetworkAddress and swDHCPServerPoolNetworkAddressMask) 3:Router Option (swDHCPServerDefaultRouterTable) 6:Domain Name Server (swDHCPServerNetBIOSNameServerTable) 15:Domain Name (swDHCPServerPoolDomainName) 44:Netbios Name Server (swDHCPServerNetBIOSNameServerTable) 46:Netbios Node Type (swDHCPServerPoolNetBIOSNodeType) 51/58/59:IP Address Lease Time/Renewal (T1) Time Value/Rebinding (T2) Time Value (swDHCPServerPoolLeaseState,swDHCPServerPoolLeaseDay, swDHCPServerPoolLeaseHour and swDHCPServerPoolLeaseMinute) INTEGER .1.3.6.1.4.1.171.12.38.3.9.2.1.1 |
swDHCPServerOptionValueTypeThis object indicates the type of option. string(1): Means the type of option value is character string, it depends on swDHCPServerOptionProfileOptionValue. hex(2): Means the type of option value is hexadecimal, it depends on swDHCPServerOptionProfileOptionValue.rw Enumeration .1.3.6.1.4.1.171.12.38.3.9.2.1.2 |
swDHCPServerOptionValueThis object indicates the value of this option.rw DisplayString .1.3.6.1.4.1.171.12.38.3.9.2.1.3 |
swDHCPServerOptionRowStatusThis object manages this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.12.38.3.9.2.1.4 |