DGS3426-L3MGMT-MIB
AI MIB Summary
The DGS3426-L3MGMT-MIB enables monitoring and management of Layer 3 routing protocols, IP interfaces, and forwarding tables on D-Link DGS-3426 series managed switches. It provides access to specific metrics including OSPF/BGP neighbor states, interface IP addresses, routing table entries, and ARP cache information for enterprise network troubleshooting.
The Structure of Layer 3 Network Management Information for the proprietary enterprise.
Main OID:
swL3MgmtMIB.1.3.6.1.4.1.171.11.70.1.3
138
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
138 total| Object Name |
|---|
swL3MgmtMIBThe Structure of Layer 3 Network Management Information for the proprietary enterprise. MODULE-IDENTITY .1.3.6.1.4.1.171.11.70.1.3 |
swL3DevMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.70.1.3.1 |
swL3DevCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.70.1.3.1.1 |
swL3DevCtrlRIPStateThis object indicates Routing Information Protocol (RIP) version 2 function is enabled or disabled.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.1.1.1 |
swL3IpMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.70.1.3.2 |
swL3IpCtrlMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.70.1.3.2.1 |
swL3IpCtrlTableThis table contain IP interface information. SEQUENCE OF SwL3IpCtrlEntry .1.3.6.1.4.1.171.11.70.1.3.2.1.3 |
swL3IpCtrlEntryA list of information about a specific IP interface. SwL3IpCtrlEntry .1.3.6.1.4.1.171.11.70.1.3.2.1.3.1 |
swL3IpCtrlInterfaceNameThis object indicates the name of the IP interface.ro DisplayString .1.3.6.1.4.1.171.11.70.1.3.2.1.3.1.1 |
swL3IpCtrlIfIndexThis object uniquely identifies the IP interface number in the swL3IpCtrlTable.ro INTEGER .1.3.6.1.4.1.171.11.70.1.3.2.1.3.1.2 |
swL3IpCtrlIpAddrThe IP address of the interface. This object only can take the value of the unicast IP address.rw IpAddress .1.3.6.1.4.1.171.11.70.1.3.2.1.3.1.3 |
swL3IpCtrlIpSubnetMaskThe IP net mask for this interface.rw IpAddress .1.3.6.1.4.1.171.11.70.1.3.2.1.3.1.4 |
swL3IpCtrlVlanNameThis object indicates the IP control entry's VLAN name. The VLAN name in each entry must be unique in the IP Control Table.rw DisplayString .1.3.6.1.4.1.171.11.70.1.3.2.1.3.1.5 |
swL3IpCtrlProxyArpThis object indicates enable/disable of the proxy ARP function for IPv4.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.2.1.3.1.6 |
swL3IpCtrlSecondaryWhen this is true(1), the IP address is the secondary IP. When false(2), the IP address is the primary IP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.11.70.1.3.2.1.3.1.7 |
swL3IpCtrlModeThis object indicates the IP operation mode. other(1) - This entry is currently in use but the conditions under which it will remain are determined by each of the following values. bootp(3) - The IP address will be set automatically from a BOOTP server. dhcp(4) - The IP address will be set automatically from a DHCP server.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.2.1.3.1.8 |
swL3IpCtrlAdminStateThe state of the IP interface.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.2.1.3.1.9 |
swL3IpCtrlIpv6LinkLocalAddressThe IPv6 link local address for this interface.ro Ipv6Address .1.3.6.1.4.1.171.11.70.1.3.2.1.3.1.14 |
swL3IpCtrlIpv6LinkLocalPrefixLenThe IPv6 prefix length for this IPv6 link local address.ro INTEGER .1.3.6.1.4.1.171.11.70.1.3.2.1.3.1.15 |
swL3IpCtrlStateThis variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.11.70.1.3.2.1.3.1.16 |
swL3IpCtrlIpv6LinkLocalAutoStateThe state of the IPv6 link local auto.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.2.1.3.1.17 |
swL3IpCtrlLocalProxyArpIf the state is enabled, the switch will be allowed to respond to the proxy ARP proxy ARP when the source IP and destination IP are on the same interface.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.2.1.3.1.18 |
swL3IpCtrlDhcpv6ClientStateThe state of the Dhcpv6 Client.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.2.1.3.1.20 |
swL3IpCtrlIpDirectedBroadcastStateThe state of the IP Directed Broadcast.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.2.1.3.1.21 |
swL3IpCtrlIpDhcpOption12StateEnable or disable insertion of option 12 in the DHCPDISCOVER and DHCPREQUEST message.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.2.1.3.1.22 |
swL3IpCtrlIpDhcpOption12HostNameSpecify the host name to be inserted in the DHCPDISCOVER and DHCPREQUEST message. The specified host name must start with a letter, end with a letter or digit, and have only letters, digits, and hyphen as interior characters; the maximal length is 63. By default, the host name is empty. When set an empty host name, means to clear the host name setting and use the default value to encode option 12.rw DisplayString .1.3.6.1.4.1.171.11.70.1.3.2.1.3.1.23 |
swL3IpCtrlDhcpv6ClientPDStateThe state of the Dhcpv6 Client PD.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.2.1.3.1.24 |
swL3IpCtrlDhcpv6ClientPDPrefixNameThis object indicates the name for the DHCPv6 Client PD. If the swL3IpCtrlDhcpv6ClientPDState is disabled, this object will be clear and can't write.rw DisplayString .1.3.6.1.4.1.171.11.70.1.3.2.1.3.1.25 |
swL3IpCtrlDhcpv6ClientPDPrefixThe IPv6 prefix obtained form delegation router.ro Ipv6Address .1.3.6.1.4.1.171.11.70.1.3.2.1.3.1.26 |
swL3IpCtrlDhcpv6ClientPDPrefixLenThe IPv6 prefix length for the prefix obtained from delegation router.ro INTEGER .1.3.6.1.4.1.171.11.70.1.3.2.1.3.1.27 |
swL3Ipv6CtrlTableThis table contains IPv6 information of an IP interface. SEQUENCE OF SwL3Ipv6CtrlEntry .1.3.6.1.4.1.171.11.70.1.3.2.1.4 |
swL3Ipv6CtrlEntryA list of IPv6 information about a specific IP interface. SwL3Ipv6CtrlEntry .1.3.6.1.4.1.171.11.70.1.3.2.1.4.1 |
swL3Ipv6CtrlInterfaceNameThis object indicates the name of the IP interface.ro DisplayString .1.3.6.1.4.1.171.11.70.1.3.2.1.4.1.1 |
swL3Ipv6CtrlMaxReassmblySizeMaximum Reassembly Size of the IP interface.ro INTEGER .1.3.6.1.4.1.171.11.70.1.3.2.1.4.1.2 |
swL3Ipv6CtrlNsRetransTimerNeighbor solicitation's retransmit timer. The unit is set in milliseconds.rw Unsigned32 .1.3.6.1.4.1.171.11.70.1.3.2.1.4.1.3 |
swL3Ipv6CtrlRaStateNeighbor solicited state.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.2.1.4.1.5 |
swL3Ipv6CtrlRaMinRtrAdvIntervalThe minimum time allowed between sending unsolicited multicast Router Advertisements from the interface. The unit is set in seconds. It must be no less than 3 seconds and no greater than .75 * MaxRtrAdvInterval. Default value: 0.33 * MaxRtrAdvIntervalrw INTEGER .1.3.6.1.4.1.171.11.70.1.3.2.1.4.1.6 |
swL3Ipv6CtrlRaMaxRtrAdvIntervalThe maximum time allowed between sending unsolicited multicast Router Advertisements from the interface. The unit is set in seconds.rw INTEGER .1.3.6.1.4.1.171.11.70.1.3.2.1.4.1.7 |
swL3Ipv6CtrlRaLifeTimeIndicates the lifetime of the router as the default router.rw INTEGER .1.3.6.1.4.1.171.11.70.1.3.2.1.4.1.8 |
swL3Ipv6CtrlRaReachableTimeIndicates the amount of time that a node can consider a neighboring node reachable after receiving a reachability confirmation.rw INTEGER .1.3.6.1.4.1.171.11.70.1.3.2.1.4.1.9 |
swL3Ipv6CtrlRaRetransTimeIndicates the amount of time between retransmissions of neighbor solicited messages. The unit is set in millisecond.rw Unsigned32 .1.3.6.1.4.1.171.11.70.1.3.2.1.4.1.10 |
swL3Ipv6CtrlRaHopLimitIndicates the default value of the hop limit field in the IPv6 header for packets sent by hosts that receive this RA message.rw INTEGER .1.3.6.1.4.1.171.11.70.1.3.2.1.4.1.11 |
swL3Ipv6CtrlRaManagedFlagWhen enabled, it indicates that hosts receiving this RA must use a stateful address configuration protocol to obtain an address in the addition to the addresses derived from the stateless address configuration.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.2.1.4.1.12 |
swL3Ipv6CtrlRaOtherConfigFlagWhen enabled, it indicates that hosts receiving this RA must use a stateful address configuration protocol to obtain an on-link address configuration information.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.2.1.4.1.13 |
swL3Ipv6AddressCtrlTableThis table contain IPv6 address information for each IP interface. SEQUENCE OF SwL3Ipv6AddressCtrlEntry .1.3.6.1.4.1.171.11.70.1.3.2.1.5 |
swL3Ipv6AddressCtrlEntryA list of information about a specific IPv6 address. SwL3Ipv6AddressCtrlEntry .1.3.6.1.4.1.171.11.70.1.3.2.1.5.1 |
swL3Ipv6AddressCtrlInterfaceNameThis object indicates the name of the IP interface.ro DisplayString .1.3.6.1.4.1.171.11.70.1.3.2.1.5.1.1 |
swL3Ipv6AddressSpecify the IPv6 address.ro Ipv6Address .1.3.6.1.4.1.171.11.70.1.3.2.1.5.1.2 |
swL3Ipv6AddressCtrlPrefixLenIndicates the prefix length of this IPv6 address.ro INTEGER .1.3.6.1.4.1.171.11.70.1.3.2.1.5.1.3 |
swL3Ipv6AddressCtrlPreferredLifeTimeIndicates the number of seconds that an address, based on the specified prefix, using the stateless address configuration, remains in preferred state. For an infinite valid lifetime, the value can be set to 0xffffffff.rw Unsigned32 .1.3.6.1.4.1.171.11.70.1.3.2.1.5.1.4 |
swL3Ipv6AddressCtrlValidLifeTimeIndicates the number of seconds that an address, based on the specified prefix, using the stateless address configuration, remains valid. For an infinite valid lifetime, the value can be set to 0xffffffff.rw Unsigned32 .1.3.6.1.4.1.171.11.70.1.3.2.1.5.1.5 |
swL3Ipv6AddressCtrlOnLinkFlagWhen enabled, the address implied by the specified prefix is available on the link where the RA message is received.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.2.1.5.1.6 |
swL3Ipv6AddressCtrlAutonomousFlagWhen enabled, the specified prefix will be used to create an autonomous address configuration.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.2.1.5.1.7 |
swL3Ipv6AddressCtrlStateThis variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.11.70.1.3.2.1.5.1.8 |
swL3Ipv6AddressCtrlAddressTypeThis object indicates the type of the IPv6 address. manual(1): the IPv6 address is configured by user. dhcpv6(2): the IPv6 address is assigned by DHCPv6 server. stateless(3): the IPv6 address is assigned by router advertisement.ro Enumeration .1.3.6.1.4.1.171.11.70.1.3.2.1.5.1.9 |
swL3Ipv6DHCPv6CPDAddrCtrlTableThis table contain the information of the IPv6 address which based on DHCPv6 client PD. SEQUENCE OF SwL3Ipv6DHCPv6CPDAddrCtrlEntry .1.3.6.1.4.1.171.11.70.1.3.2.1.6 |
swL3Ipv6DHCPv6CPDAddrCtrlEntryA list of information about a specific DHCPv6 Client PD IPv6 address. SwL3Ipv6DHCPv6CPDAddrCtrlEntry .1.3.6.1.4.1.171.11.70.1.3.2.1.6.1 |
swL3Ipv6DHCPv6CPDAddrCtrlInterfaceNameThis object indicates the name of the IP interface.ro DisplayString .1.3.6.1.4.1.171.11.70.1.3.2.1.6.1.1 |
swL3Ipv6DHCPv6CPDAddrCtrlPrefixNameThis object indicates the name of the prefix based on which the IPv6 address will be generate.ro DisplayString .1.3.6.1.4.1.171.11.70.1.3.2.1.6.1.2 |
swL3Ipv6DHCPv6CPDAddrCtrlIPv6addrSpecify the suffix of the IPv6 address.ro Ipv6Address .1.3.6.1.4.1.171.11.70.1.3.2.1.6.1.3 |
swL3Ipv6DHCPv6CPDAddrCtrlPrefixLenIndicates the prefix length of this IPv6 address.ro INTEGER .1.3.6.1.4.1.171.11.70.1.3.2.1.6.1.4 |
swL3Ipv6DHCPv6CPDAddrCtrlStateThis variable displays the status of the entry. The status is used for creating and deleting instances of the objects in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.11.70.1.3.2.1.6.1.5 |
swL3IpCtrlAllIpIfStateThis object indicates all interface function state of the device.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.2.1.7 |
swL3IpFdbMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.70.1.3.2.2 |
swL3IpFdbInfoTableA table that contains forwarding and/or filtering information. This information is used by the switch in determining how to propagate the received IP packets. SEQUENCE OF SwL3IpFdbInfoEntry .1.3.6.1.4.1.171.11.70.1.3.2.2.1 |
swL3IpFdbInfoEntryInformation about a specific IP address for which the bridge has some forwarding and/or filtering information. SwL3IpFdbInfoEntry .1.3.6.1.4.1.171.11.70.1.3.2.2.1.1 |
swL3IpFdbInfoIpAddrA IP address for which switch has forwarding and/or filtering information.ro IpAddress .1.3.6.1.4.1.171.11.70.1.3.2.2.1.1.1 |
swL3IpFdbInfoIpSubnetMaskA IP net mask for this interface.for which switch has forwarding and/or filtering information.ro IpAddress .1.3.6.1.4.1.171.11.70.1.3.2.2.1.1.2 |
swL3IpFdbInfoPortEither the value '0', or the port number of the port on which packet having a IP address equal to the value of the corresponding instance of swL3IpFdbInfoIpAddr has been seen. A value of '0' indicates that the port number has not been learned but that switch does have some forwarding/filtering information about this address.ro INTEGER .1.3.6.1.4.1.171.11.70.1.3.2.2.1.1.3 |
swL3IpFdbInfoTypeThe status of this entry.ro Enumeration .1.3.6.1.4.1.171.11.70.1.3.2.2.1.1.4 |
swL3IpArpAgingTimeThe timeout period in minutes for aging out dynamically learned arp information.rw INTEGER .1.3.6.1.4.1.171.11.70.1.3.2.4 |
swL3IpStaticRouteTableThis entity's IP static Routing table. SEQUENCE OF SwL3IpStaticRouteEntry .1.3.6.1.4.1.171.11.70.1.3.2.5 |
swL3IpStaticRouteEntryA particular route to a particular destination, under a particular policy. Once an entry be built,it shouldn't be modified.That is,it just support create and delete action. SwL3IpStaticRouteEntry .1.3.6.1.4.1.171.11.70.1.3.2.5.1 |
swL3IpStaticRouteDestThe destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the swL3IpStaticRouteMask object is not equal to x.ro IpAddress .1.3.6.1.4.1.171.11.70.1.3.2.5.1.1 |
swL3IpStaticRouteMaskIndicate the mask to be logical-ANDed with the destination address before being compared to the value in the swL3IpStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the swL3IpStaticRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the swL3IpStaticRouteDest object is not equal to swL3IpStaticRouteDest.ro IpAddress .1.3.6.1.4.1.171.11.70.1.3.2.5.1.2 |
swL3IpStaticRouteBkupStateThe routing state for this route.The value SHOULD be primary(1) or backup(2).ro Enumeration .1.3.6.1.4.1.171.11.70.1.3.2.5.1.3 |
swL3IpStaticRouteNextHopOn remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0.rw IpAddress .1.3.6.1.4.1.171.11.70.1.3.2.5.1.4 |
swL3IpStaticRouteMetricThe routing metric for this route.rw INTEGER .1.3.6.1.4.1.171.11.70.1.3.2.5.1.5 |
swL3IpStaticRouteStatusThis object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry resides in the table. active(4) - the nextHop of this entry exists in the ARP table. inActive(5) - the next hop of this entry does not exist in the ARP table.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.2.5.1.6 |
swL3RelayMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.70.1.3.3 |
swL3RelayDhcpMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.70.1.3.3.1 |
swL3RelayDhcpStateThis object indicates Dhcp Relay function is enabled or disabled.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.3.1.1 |
swL3RelayDhcpHopCountThis object indicates the maximum number of router hops that the BOOTP packets can cross.rw INTEGER .1.3.6.1.4.1.171.11.70.1.3.3.1.2 |
swL3RelayDhcpTimeThresholdThis object indicates the minimum time in seconds within which the switch must relay the Dhcp request. If this time is exceeded, the switch will drop the Dhcp packet.rw INTEGER .1.3.6.1.4.1.171.11.70.1.3.3.1.3 |
swL3RelayDhcpCtrlTableThis table specifys the IP address as a destination to forward (relay) DHCP packets to. SEQUENCE OF SwL3RelayDhcpCtrlEntry .1.3.6.1.4.1.171.11.70.1.3.3.1.4 |
swL3RelayDhcpCtrlEntryA list of information specifies the IP address as a destination to forward (relay) DHCP packets to. SwL3RelayDhcpCtrlEntry .1.3.6.1.4.1.171.11.70.1.3.3.1.4.1 |
swL3RelayDhcpCtrlInterfaceNameThe name of the IP interface.ro DisplayString .1.3.6.1.4.1.171.11.70.1.3.3.1.4.1.1 |
swL3RelayDhcpCtrlServerThe DHCP server IP address.ro IpAddress .1.3.6.1.4.1.171.11.70.1.3.3.1.4.1.2 |
swL3RelayDhcpCtrlStateThis object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry is reside in the table.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.3.1.4.1.3 |
swL3RelayDhcpOption82StateThis object indicates DHCP Relay Option 82 function is enabled or disabled.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.3.1.5 |
swL3RelayDhcpOption82CheckStateThis object indicates DHCP Relay Option 82 Check function is enabled or disabled.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.3.1.6 |
swL3RelayDhcpOption82PolicyThis object indicates DHCP Relay Option 82 Policy.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.3.1.7 |
swL3DHCPRelayOption60 OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.70.1.3.3.1.8 |
swL3DHCPRelayOption60StateThis object indicates DHCP relay option 60 function is enabled or disabled.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.3.1.8.1 |
swL3DHCPRelayOption60DefModeThis object indicates default mode that has no option 60 mathcing rules. relay(1): means to relay the packet to the IP address which is specified by swL3DHCPRelayOption60DefRelayIp. drop(2): means to drop the packet.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.3.1.8.2 |
swL3DHCPRelayOption60DefTableThis table indicates the default relay servers for the packet that has no option 60 mathcing rules. SEQUENCE OF SwL3DHCPRelayOption60DefEntry .1.3.6.1.4.1.171.11.70.1.3.3.1.8.3 |
swL3DHCPRelayOption60DefEntryA list of information indicates the default relay servers for the packet that has no option 60 mathcing rules. SwL3DHCPRelayOption60DefEntry .1.3.6.1.4.1.171.11.70.1.3.3.1.8.3.1 |
swL3DHCPRelayOption60DefRelayIpThis object indicates the IP address of default relay server.ro IpAddress .1.3.6.1.4.1.171.11.70.1.3.3.1.8.3.1.1 |
swL3DHCPRelayOption60DefRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.11.70.1.3.3.1.8.3.1.2 |
swL3DHCPRelayOption60TableThis table indicates the relay servers for the packet at option 60 rules. SEQUENCE OF SwL3DHCPRelayOption60Entry .1.3.6.1.4.1.171.11.70.1.3.3.1.8.4 |
swL3DHCPRelayOption60EntryA list of information indicates the relay servers for the packet at option 60 rules. SwL3DHCPRelayOption60Entry .1.3.6.1.4.1.171.11.70.1.3.3.1.8.4.1 |
swL3DHCPRelayOption60StringThis object indicates string of this entry. Note that it is theoretically possible for a valid string to exceed the allowed length of an SNMP object identifier, and thus be impossible to represent in tables in this MIB that are indexed by string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.11.70.1.3.3.1.8.4.1.1 |
swL3DHCPRelayOption60RelayIpThis object indicates the IP address of relay server.ro IpAddress .1.3.6.1.4.1.171.11.70.1.3.3.1.8.4.1.2 |
swL3DHCPRelayOption60MatchTypeThis object indicates match state of this entry. exact(1): means the option 60 string in the packet must full match with the specified string. partial(2): means the option 60 string in the packet only need partial match with the specified string.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.3.1.8.4.1.3 |
swL3DHCPRelayOption60RowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.11.70.1.3.3.1.8.4.1.4 |
swL3DHCPRelayOption61 OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.70.1.3.3.1.9 |
swL3DHCPRelayOption61StateThis object indicates DHCP relay option 61 function is enabled or disabled.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.3.1.9.1 |
swL3DHCPRelayOption61DefModeThis object indicates default mode that has no option 61 mathcing rules. relay(1): means to relay the packet to the IP address which is specified by swL3DHCPRelayOption61DefRelayIp. drop(2): means to drop the packet.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.3.1.9.2 |
swL3DHCPRelayOption61DefRelayIpThis object indicates the IP address of default relay server that has no option 61 mathcing rules. Pay attention to when swL3DHCPRelayOption61Mode is: relay(1): this object must be set together. drop(2): this object can not be set, and it always returns '0.0.0.0'.rw IpAddress .1.3.6.1.4.1.171.11.70.1.3.3.1.9.3 |
swL3DHCPRelayOption61TableThis table indicates the relay servers for the packet at option 61 rules. SEQUENCE OF SwL3DHCPRelayOption61Entry .1.3.6.1.4.1.171.11.70.1.3.3.1.9.4 |
swL3DHCPRelayOption61EntryA list of information indicates the relay servers for the packet at option 61 rules. SwL3DHCPRelayOption61Entry .1.3.6.1.4.1.171.11.70.1.3.3.1.9.4.1 |
swL3DHCPRelayOption61ClientTypeThis object indicates client type of this entry. mac(1): means the client-ID which is the MAC address of client. string(2): means the client-ID which is specified string by administrator.ro Enumeration .1.3.6.1.4.1.171.11.70.1.3.3.1.9.4.1.1 |
swL3DHCPRelayOption61ClientIDThis object indicates string of this entry. When swL3DHCPRelayOption61ClientType is mac(1), the format of this object should be XX-XX-XX-XX-XX-XX (MAC address). Note that it is theoretically possible for a valid string to exceed the allowed length of an SNMP object identifier, and thus be impossible to represent in tables in this MIB that are indexed by string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.11.70.1.3.3.1.9.4.1.2 |
swL3DHCPRelayOption61ModeThis object indicates mode of this entry. relay(1): means to relay the packet to the IP address which is specified by swL3DHCPRelayOption61RelayIp. drop(2): means to drop the packet.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.3.1.9.4.1.3 |
swL3DHCPRelayOption61RelayIpThis object indicates the IP address of relay server. Pay attention to when swL3DHCPRelayOption61Mode is: relay(1): this object must be set together. drop(2): this object can not be set, and it always returns '0.0.0.0'.rw IpAddress .1.3.6.1.4.1.171.11.70.1.3.3.1.9.4.1.4 |
swL3DHCPRelayOption61RowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.11.70.1.3.3.1.9.4.1.5 |
swL3RelayDnsMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.70.1.3.3.2 |
swL3RelayDnsStateThis object indicates DNS Relay function is enabled or disabled.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.3.2.1 |
swL3RelayDnsPrimaryServerThis object indicates the address of the primary DNS server.rw IpAddress .1.3.6.1.4.1.171.11.70.1.3.3.2.2 |
swL3RelayDnsSecondaryServerThis object indicates the address of the secondary DNS server.rw IpAddress .1.3.6.1.4.1.171.11.70.1.3.3.2.3 |
swL3RelayDnsCacheStateThis object indicates DNS Relay cache is enabled or disabled.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.3.2.4 |
swL3RelayDnsStaticTableStateThis object indicates DNS Relay static table is enabled or disabled.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.3.2.5 |
swL3RelayDnsCtrlTableThis table display the current DNS relay static table. SEQUENCE OF SwL3RelayDnsCtrlEntry .1.3.6.1.4.1.171.11.70.1.3.3.2.6 |
swL3RelayDnsCtrlEntryA list of information display the current DNS relay static table. SwL3RelayDnsCtrlEntry .1.3.6.1.4.1.171.11.70.1.3.3.2.6.1 |
swL3RelayDnsCtrlDomainNameThe domain name of the entry.ro DisplayString .1.3.6.1.4.1.171.11.70.1.3.3.2.6.1.1 |
swL3RelayDnsCtrlIpAddrThe IP address of the entry.ro IpAddress .1.3.6.1.4.1.171.11.70.1.3.3.2.6.1.2 |
swL3RelayDnsCtrlStateThis object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry is reside in the table.rw Enumeration .1.3.6.1.4.1.171.11.70.1.3.3.2.6.1.3 |
swL3RouteRedistriTableRoute redistribution allows routers on the network that are running different routing protocols to exchange routing information. This is accomplished by comparing the routes stored in the varios routers' routing tables and assigning appropriate metrics. This information is then exchanged among the various routers according to the individual routers current routing protocol. SEQUENCE OF SwL3RouteRedistriEntry .1.3.6.1.4.1.171.11.70.1.3.5 |
swL3RouteRedistriEntryA list of information displaying the route redistribution table. SwL3RouteRedistriEntry .1.3.6.1.4.1.171.11.70.1.3.5.1 |
swL3RouteRedistriSrcProtocolAllows the selection of the protocol of the source device.ro Enumeration .1.3.6.1.4.1.171.11.70.1.3.5.1.1 |
swL3RouteRedistriDstProtocolAllows the selection of the protocol of the destination device.ro Enumeration .1.3.6.1.4.1.171.11.70.1.3.5.1.2 |
swL3RouteRedistriMetricAllows the entry of an OSPF interface cost. This is analogous to a Hop Count in the RIP routing protocol. The value '0' indicates default value.rw INTEGER .1.3.6.1.4.1.171.11.70.1.3.5.1.4 |
swL3RouteRedistriRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.11.70.1.3.5.1.5 |
swL3RoutePreference OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.70.1.3.9 |
swL3RoutePreferenceRIPUsed to configure the route preference of RIP.rw INTEGER .1.3.6.1.4.1.171.11.70.1.3.9.1 |
swL3RoutePreferenceStaticUsed to configure the route preference of Static.rw INTEGER .1.3.6.1.4.1.171.11.70.1.3.9.3 |
swL3RoutePreferenceLocalUsed to read the route preference of Local.ro INTEGER .1.3.6.1.4.1.171.11.70.1.3.9.4 |
swL3RoutePreferenceDefaultUsed to configure the route preference of Default.rw INTEGER .1.3.6.1.4.1.171.11.70.1.3.9.8 |