DGS3000-28SC-L3MGMT-MIB
AI MIB Summary
The DGS3000-28SC-L3MGMT-MIB module enables SNMP-based monitoring and configuration of Layer 3 routing protocols, IP interfaces, and forwarding tables on D-Link DGS-3000 series managed switches. It provides access to critical network metrics including interface status, IP address assignments, ARP tables, and dynamic routing protocol states for enterprise network management.
The Structure of Layer 3 Network Management Information for the proprietary enterprise.
Main OID:
swL3MgmtMIB.1.3.6.1.4.1.171.11.133.5.1.3
107
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
107 total| Object Name |
|---|
swL3MgmtMIBThe Structure of Layer 3 Network Management Information for the proprietary enterprise. MODULE-IDENTITY .1.3.6.1.4.1.171.11.133.5.1.3 |
swL3IpMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.133.5.1.3.2 |
swL3IpCtrlMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.133.5.1.3.2.1 |
swL3IpCtrlTableThis table contains IP interface information. SEQUENCE OF SwL3IpCtrlEntry .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3 |
swL3IpCtrlEntryA list of information about a specific IP interface. SwL3IpCtrlEntry .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1 |
swL3IpCtrlInterfaceNameThis object indicates the name of the IP interface.ro DisplayString .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.1 |
swL3IpCtrlIfIndexThis object uniquely identifies the IP interface number in the swL3IpCtrlTable.ro INTEGER .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.2 |
swL3IpCtrlIpAddrThe IP address of the interface. This object only can take the value of the unicast IP address.rw IpAddress .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.3 |
swL3IpCtrlIpSubnetMaskThe IP net mask for this interface.rw IpAddress .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.4 |
swL3IpCtrlVlanNameThis object indicates the IP control entry's VLAN name. The VLAN name in each entry must be unique in the IP Control Table.rw DisplayString .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.5 |
swL3IpCtrlProxyArpThis object indicates enable/disable of the proxy ARP function for IPv4.rw Enumeration .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.6 |
swL3IpCtrlSecondaryWhen this is true(1), the IP address is the secondary IP. When false(2), the IP address is the primary IP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.7 |
swL3IpCtrlModeThis object indicates the IP operation mode. other(1) - This entry is currently in use but the conditions under which it will remain are determined by each of the following values. bootp(3) - The IP address will be set automatically from a BOOTP server. dhcp(4) - The IP address will be set automatically from a DHCP server.rw Enumeration .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.8 |
swL3IpCtrlAdminStateThe state of the IP interface.rw Enumeration .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.9 |
swL3IpCtrlIpv4AdminStateThe IPv4 admin state of the IP interface. The default state is determined by project. This state will only be effective when the swL3IpCtrlAdminState is enabled.rw Enumeration .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.10 |
swL3IpCtrlIpv6AdminStateThe IPv6 admin state of the IP interface. The default state is determined by project. This state will only be effective when the swL3IpCtrlAdminState is enabled.rw Enumeration .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.12 |
swL3IpCtrlIpv6LinkLocalAddressThe IPv6 link local address for this interface.ro Ipv6Address (IPV6-TC) .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.14 |
swL3IpCtrlIpv6LinkLocalPrefixLenThe IPv6 prefix length for this IPv6 link local address.ro INTEGER .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.15 |
swL3IpCtrlStateThis variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.16 |
swL3IpCtrlIpv6LinkLocalAutoStateThe state of the IPv6 link local auto.rw Enumeration .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.17 |
swL3IpCtrlLocalProxyArpThis object indicates enable/disable of the local proxy ARP function for IPv4.rw Enumeration .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.18 |
swL3IpCtrlIpMtuThe MTU is the largest size of the IP datagram which may be transferred using a specific data link connection. The MTU value is a design parameter of a LAN and is a mutually agreed value (i.e. both ends of a link agree to use the same specific value) for most WAN links. The MTU range is based on the chip of the current device. The suggested minimum value is 1500 bytes. The suggested maximum value is the size of the jumbo frame minus 36. The suggested default setting is 1500 bytes.rw INTEGER UNITS "bytes" .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.19 |
swL3IpCtrlDhcpv6ClientStateThe object indicates the state of the DHCPv6 client.rw Enumeration .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.20 |
swL3IpCtrlIpDirectedBroadcastStateThe object indicates the state of the IP Directed Broadcast.rw Enumeration .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.21 |
swL3IpCtrlIpDhcpOption12StateEnable or disable insertion of option 12 in the DHCPDISCOVER and DHCPREQUEST message.rw Enumeration .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.22 |
swL3IpCtrlIpDhcpOption12HostNameSpecify the host name to be inserted in the DHCPDISCOVER and DHCPREQUEST message. The specified host name must start with a letter, end with a letter or digit, and have only letters, digits, and hyphen as interior characters; the maximal length is 63. By default, the host name is empty. When set an empty host name, means to clear the host name setting and use the default value to encode option 12.rw DisplayString .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.23 |
swL3IpCtrlDhcpv6ClientPDStateThe state of the Dhcpv6 Client PD.rw Enumeration .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.24 |
swL3IpCtrlDhcpv6ClientPDPrefixNameThis object indicates the name for the DHCPv6 Client PD. If the swL3IpCtrlDhcpv6ClientPDState is disabled, this object will be clear and can't write.rw DisplayString .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.25 |
swL3IpCtrlDhcpv6ClientPDPrefixThe IPv6 prefix obtained form delegation router.ro Ipv6Address (IPV6-TC) .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.26 |
swL3IpCtrlDhcpv6ClientPDPrefixLenThe IPv6 prefix length for the prefix obtained from delegation router.ro INTEGER .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.27 |
swL3IpCtrlIpv6AutoConfigStateThe state of IPv6 stateless adddress autoconfig.rw Enumeration .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.28 |
swL3IpCtrlIpv6AutoConfigDefaultWhen this is true(1), a default route will be installed into ipv6 routing table. When false(2), no default route will be installed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.29 |
swL3IpCtrlDhcpv6ClientRapidCommitWhen this is true(1), Allows the two-message exchange method for address assignment.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.30 |
swL3IpCtrlDhcpv6ClientPDRapidCommitWhen this is true(1), Allows the two-message exchange method for prefix assignment.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.31 |
swL3Ipv6CtrlTableThis table contains IPv6 information of an IP interface. SEQUENCE OF SwL3Ipv6CtrlEntry .1.3.6.1.4.1.171.11.133.5.1.3.2.1.4 |
swL3Ipv6CtrlEntryA list of IPv6 information about a specific IP interface. SwL3Ipv6CtrlEntry .1.3.6.1.4.1.171.11.133.5.1.3.2.1.4.1 |
swL3Ipv6CtrlInterfaceNameThis object indicates the name of the IP interface.ro DisplayString .1.3.6.1.4.1.171.11.133.5.1.3.2.1.4.1.1 |
swL3Ipv6CtrlMaxReassmblySizeMaximum Reassembly Size of the IP interface.ro INTEGER .1.3.6.1.4.1.171.11.133.5.1.3.2.1.4.1.2 |
swL3Ipv6CtrlNsRetransTimerNeighbor solicitation's retransmit timer. The unit is set in milliseconds.rw Unsigned32 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.4.1.3 |
swL3Ipv6CtrlRaStateNeighbor solicited state.rw Enumeration .1.3.6.1.4.1.171.11.133.5.1.3.2.1.4.1.5 |
swL3Ipv6CtrlRaMinRtrAdvIntervalThe minimum time allowed between sending unsolicited multicast Router Advertisements from the interface. The unit is set in seconds. It must be no less than 3 seconds and no greater than .75 * MaxRtrAdvInterval. Default value: 0.33 * MaxRtrAdvIntervalrw INTEGER .1.3.6.1.4.1.171.11.133.5.1.3.2.1.4.1.6 |
swL3Ipv6CtrlRaMaxRtrAdvIntervalThe maximum time allowed between sending unsolicited multicast Router Advertisements from the interface. The unit is set in seconds.rw INTEGER .1.3.6.1.4.1.171.11.133.5.1.3.2.1.4.1.7 |
swL3Ipv6CtrlRaLifeTimeIndicates the lifetime of the router as the default router.rw INTEGER .1.3.6.1.4.1.171.11.133.5.1.3.2.1.4.1.8 |
swL3Ipv6CtrlRaReachableTimeIndicates the amount of time that a node can consider a neighboring node reachable after receiving a reachability confirmation.rw INTEGER .1.3.6.1.4.1.171.11.133.5.1.3.2.1.4.1.9 |
swL3Ipv6CtrlRaRetransTimeIndicates the amount of time between retransmissions of neighbor solicited messages. The unit is set in millisecond.rw Unsigned32 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.4.1.10 |
swL3Ipv6CtrlRaHopLimitIndicates the default value of the hop limit field in the IPv6 header for packets sent by hosts that receive this RA message.rw INTEGER .1.3.6.1.4.1.171.11.133.5.1.3.2.1.4.1.11 |
swL3Ipv6CtrlRaManagedFlagWhen enabled, it indicates that hosts receiving this RA must use a stateful address configuration protocol to obtain an address in the addition to the addresses derived from the stateless address configuration.rw Enumeration .1.3.6.1.4.1.171.11.133.5.1.3.2.1.4.1.12 |
swL3Ipv6CtrlRaOtherConfigFlagWhen enabled, it indicates that hosts receiving this RA must use a stateful address configuration protocol to obtain an on-link address configuration information.rw Enumeration .1.3.6.1.4.1.171.11.133.5.1.3.2.1.4.1.13 |
swL3Ipv6CtrlDadRetransNumIndicates the value of duplicate address detection attempt numberrw INTEGER .1.3.6.1.4.1.171.11.133.5.1.3.2.1.4.1.14 |
swL3Ipv6AddressCtrlTableThis table contains IPv6 address information for each IP interface. SEQUENCE OF SwL3Ipv6AddressCtrlEntry .1.3.6.1.4.1.171.11.133.5.1.3.2.1.5 |
swL3Ipv6AddressCtrlEntryA list of information about a specific IPv6 address. SwL3Ipv6AddressCtrlEntry .1.3.6.1.4.1.171.11.133.5.1.3.2.1.5.1 |
swL3Ipv6AddressCtrlInterfaceNameThis object indicates the name of the IP interface.ro DisplayString .1.3.6.1.4.1.171.11.133.5.1.3.2.1.5.1.1 |
swL3Ipv6AddressSpecify the IPv6 address.ro Ipv6Address (IPV6-TC) .1.3.6.1.4.1.171.11.133.5.1.3.2.1.5.1.2 |
swL3Ipv6AddressCtrlPrefixLenIndicates the prefix length of this IPv6 address.ro INTEGER .1.3.6.1.4.1.171.11.133.5.1.3.2.1.5.1.3 |
swL3Ipv6AddressCtrlPreferredLifeTimeIndicates the number of seconds that an address, based on the specified prefix, using the stateless address configuration, remains in preferred state. For an infinite valid lifetime, the value can be set to 0xffffffff.rw Unsigned32 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.5.1.4 |
swL3Ipv6AddressCtrlValidLifeTimeIndicates the number of seconds that an address, based on the specified prefix, using the stateless address configuration, remains valid. For an infinite valid lifetime, the value can be set to 0xffffffff.rw Unsigned32 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.5.1.5 |
swL3Ipv6AddressCtrlOnLinkFlagWhen enabled, the address implied by the specified prefix is available on the link where the RA message is received.rw Enumeration .1.3.6.1.4.1.171.11.133.5.1.3.2.1.5.1.6 |
swL3Ipv6AddressCtrlAutonomousFlagWhen enabled, the specified prefix will be used to create an autonomous address configuration.rw Enumeration .1.3.6.1.4.1.171.11.133.5.1.3.2.1.5.1.7 |
swL3Ipv6AddressCtrlStateThis variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.11.133.5.1.3.2.1.5.1.8 |
swL3Ipv6AddressCtrlAddressTypeThis object indicates the type of the IPv6 address. manual(1): the IPv6 address is configured by user. dhcpv6(2): the IPv6 address is assigned by DHCPv6 server. stateless(3): the IPv6 address is assigned by router advertisement.ro Enumeration .1.3.6.1.4.1.171.11.133.5.1.3.2.1.5.1.9 |
swL3Ipv6DHCPv6CPDAddrCtrlTableThis table contain the information of the IPv6 address which based on DHCPv6 client PD. SEQUENCE OF SwL3Ipv6DHCPv6CPDAddrCtrlEntry .1.3.6.1.4.1.171.11.133.5.1.3.2.1.6 |
swL3Ipv6DHCPv6CPDAddrCtrlEntryA list of information about a specific DHCPv6 Client PD IPv6 address. SwL3Ipv6DHCPv6CPDAddrCtrlEntry .1.3.6.1.4.1.171.11.133.5.1.3.2.1.6.1 |
swL3Ipv6DHCPv6CPDAddrCtrlInterfaceNameThis object indicates the name of the IP interface.ro DisplayString .1.3.6.1.4.1.171.11.133.5.1.3.2.1.6.1.1 |
swL3Ipv6DHCPv6CPDAddrCtrlPrefixNameThis object indicates the name of the prefix based on which the IPv6 address will be generate.ro DisplayString .1.3.6.1.4.1.171.11.133.5.1.3.2.1.6.1.2 |
swL3Ipv6DHCPv6CPDAddrCtrlIPv6addrSpecify the suffix of the IPv6 address.ro Ipv6Address (IPV6-TC) .1.3.6.1.4.1.171.11.133.5.1.3.2.1.6.1.3 |
swL3Ipv6DHCPv6CPDAddrCtrlPrefixLenIndicates the prefix length of this IPv6 address.ro INTEGER .1.3.6.1.4.1.171.11.133.5.1.3.2.1.6.1.4 |
swL3Ipv6DHCPv6CPDAddrCtrlStateThis variable displays the status of the entry. The status is used for creating and deleting instances of the objects in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.11.133.5.1.3.2.1.6.1.5 |
swL3IpCtrlAllIpIfStateThis object indicates all interface function state of the device. (except the loopback interface)rw Enumeration .1.3.6.1.4.1.171.11.133.5.1.3.2.1.7 |
swL3LoopBackIpCtrlTableThis table contains loopback IP interface information. SEQUENCE OF SwL3LoopBackIpCtrlEntry .1.3.6.1.4.1.171.11.133.5.1.3.2.1.8 |
swL3LoopBackIpCtrlEntryA list of information about a specific loopback IP interface. SwL3LoopBackIpCtrlEntry .1.3.6.1.4.1.171.11.133.5.1.3.2.1.8.1 |
swL3LoopBackIpCtrlInterfaceNameThis object indicates the name of the loopback IP interface.ro DisplayString .1.3.6.1.4.1.171.11.133.5.1.3.2.1.8.1.1 |
swL3LoopBackIpCtrlIfIndexThis object uniquely identifies the loopback IP interface number in the swL3LoopBackIpCtrlTable.ro INTEGER .1.3.6.1.4.1.171.11.133.5.1.3.2.1.8.1.2 |
swL3LoopBackIpCtrlIpAddrThe IP address of the loopback interface. This object only can take the value of the unicast IP address.rw IpAddress .1.3.6.1.4.1.171.11.133.5.1.3.2.1.8.1.3 |
swL3LoopBackIpCtrlIpSubnetMaskThe IP net mask for this loopback interface.rw IpAddress .1.3.6.1.4.1.171.11.133.5.1.3.2.1.8.1.4 |
swL3LoopBackIpCtrlAdminStateThe state of the loopback IP interface.rw Enumeration .1.3.6.1.4.1.171.11.133.5.1.3.2.1.8.1.5 |
swL3LoopBackIpCtrlRowStatusThis variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.11.133.5.1.3.2.1.8.1.6 |
swL3IpFdbMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.133.5.1.3.2.2 |
swL3IpFdbInfoTableA table that contains forwarding and/or filtering information. This information is used by the switch in determining how to propagate the received IP packets. SEQUENCE OF SwL3IpFdbInfoEntry .1.3.6.1.4.1.171.11.133.5.1.3.2.2.1 |
swL3IpFdbInfoEntryInformation about a specific IP address for which the bridge has some forwarding and/or filtering information. SwL3IpFdbInfoEntry .1.3.6.1.4.1.171.11.133.5.1.3.2.2.1.1 |
swL3IpFdbInfoIpAddrA IP address for which switch has forwarding and/or filtering information.ro IpAddress .1.3.6.1.4.1.171.11.133.5.1.3.2.2.1.1.1 |
swL3IpFdbInfoIpSubnetMaskA IP net mask for this interface for which the switch has forwarding and/or filtering information.ro IpAddress .1.3.6.1.4.1.171.11.133.5.1.3.2.2.1.1.2 |
swL3IpFdbInfoPortEither the value '0', or the port number of the port on which packet having a IP address equal to the value of the corresponding instance of swL3IpFdbInfoIpAddr has been seen. A value of '0' indicates that the port number has not been learned but that switch does have some forwarding/filtering information about this address.ro INTEGER .1.3.6.1.4.1.171.11.133.5.1.3.2.2.1.1.3 |
swL3IpFdbInfoTypeThe status of this entry.ro Enumeration .1.3.6.1.4.1.171.11.133.5.1.3.2.2.1.1.4 |
swL3IpArpAgingTimeThe timeout period in minutes for aging out dynamically learned ARP information.rw INTEGER .1.3.6.1.4.1.171.11.133.5.1.3.2.4 |
swL3IpStaticRouteTableThis entity's IP static Routing table. SEQUENCE OF SwL3IpStaticRouteEntry .1.3.6.1.4.1.171.11.133.5.1.3.2.5 |
swL3IpStaticRouteEntryA particular route to a particular destination, under a particular policy. Once an entry is built,it shouldn't be modified.That is,it just supports create and delete actions. SwL3IpStaticRouteEntry .1.3.6.1.4.1.171.11.133.5.1.3.2.5.1 |
swL3IpStaticRouteDestThe destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the swL3IpStaticRouteMask object is not equal to x.ro IpAddress .1.3.6.1.4.1.171.11.133.5.1.3.2.5.1.1 |
swL3IpStaticRouteMaskIndicate the mask to be logical-AND with the destination address before being compared to the value in the swL3IpStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the swL3IpStaticRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the swL3IpStaticRouteDest object is not equal to swL3IpStaticRouteDest.ro IpAddress .1.3.6.1.4.1.171.11.133.5.1.3.2.5.1.2 |
swL3IpStaticRouteBkupStateThe routing state for this route.The value SHOULD be primary(1), backup(2) or none(3).rw Enumeration .1.3.6.1.4.1.171.11.133.5.1.3.2.5.1.3 |
swL3IpStaticRouteNextHopSpecifies the IP address for the next hop router. An IP address of 255.255.255.255 denotes a Null interface as the next hop.ro IpAddress .1.3.6.1.4.1.171.11.133.5.1.3.2.5.1.4 |
swL3IpStaticRouteMetricSpecifies the routing metric for this route.rw INTEGER .1.3.6.1.4.1.171.11.133.5.1.3.2.5.1.5 |
swL3IpStaticRouteStatusThis object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry resides in the table. active(4) - the nextHop of this entry exists in the ARP table. inActive(5) - the next hop of this entry does not exist in the ARP table.rw Enumeration .1.3.6.1.4.1.171.11.133.5.1.3.2.5.1.6 |
swL3IpStaticRouteWeightSpecifies the weight value. Used for the weighted multipath.rw INTEGER .1.3.6.1.4.1.171.11.133.5.1.3.2.5.1.7 |
swL3IpStaticRouteInterfaceNameSpecifies the name of the IP interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.11.133.5.1.3.2.5.1.8 |
swL3IpStaticRouteCostSpecifies the cost of the Route Entry.ro INTEGER .1.3.6.1.4.1.171.11.133.5.1.3.2.5.1.9 |
swL3RelayMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.133.5.1.3.3 |
swL3RelayDnsMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.133.5.1.3.3.2 |
swL3RelayDnsStateThis object indicates if the DNS Relay function is enabled or disabled.rw Enumeration .1.3.6.1.4.1.171.11.133.5.1.3.3.2.1 |
swL3RelayDnsPrimaryServerThis object indicates the address of the primary DNS server.rw IpAddress .1.3.6.1.4.1.171.11.133.5.1.3.3.2.2 |
swL3RelayDnsSecondaryServerThis object indicates the address of the secondary DNS server.rw IpAddress .1.3.6.1.4.1.171.11.133.5.1.3.3.2.3 |
swL3RelayDnsCacheStateThis object indicates DNS Relay cache is enabled or disabled.rw Enumeration .1.3.6.1.4.1.171.11.133.5.1.3.3.2.4 |
swL3RelayDnsStaticTableStateThis object indicates DNS Relay static table is enabled or disabled.rw Enumeration .1.3.6.1.4.1.171.11.133.5.1.3.3.2.5 |
swL3RelayDnsCtrlTableThis table displays the current DNS relay static table. SEQUENCE OF SwL3RelayDnsCtrlEntry .1.3.6.1.4.1.171.11.133.5.1.3.3.2.6 |
swL3RelayDnsCtrlEntryA list of information display the current DNS relay static table. SwL3RelayDnsCtrlEntry .1.3.6.1.4.1.171.11.133.5.1.3.3.2.6.1 |
swL3RelayDnsCtrlDomainNameThe domain name of the entry.ro DisplayString .1.3.6.1.4.1.171.11.133.5.1.3.3.2.6.1.1 |
swL3RelayDnsCtrlIpAddrThe IP address of the entry.ro IpAddress .1.3.6.1.4.1.171.11.133.5.1.3.3.2.6.1.2 |
swL3RelayDnsCtrlStateThis object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry is reside in the table.rw Enumeration .1.3.6.1.4.1.171.11.133.5.1.3.3.2.6.1.3 |