DGS-6600-VPLS-GENERIC-MIB
Copyright (C) The IETF Trust (2012). The initial version of this MIB module was published in RFC XXXX. -- RFC Editor: Please replace XXXX with RFC number & remove -- this note. For full legal notices see the RFC itself or see: http://www.ietf.org/copyrights/ianamib.html This MIB module contains generic managed object definitions for Virtual Private LAN Services as define in [RFC4762] and [RFC4761] This MIB module enables the use of any underlying Pseudowire network.
Main OID:
dgs6600VplsGenericMIB.1.3.6.1.4.1.171.10.120.100.4.1
48
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
48 total| Object Name |
|---|
dgs6600VplsGenericMIBCopyright (C) The IETF Trust (2012). The initial version of this MIB module was published in RFC XXXX. -- RFC Editor: Please replace XXXX with RFC number & remove -- this note. For full legal notices see the RFC itself or see: http://www.ietf.org/copyrights/ianamib.html This MIB module contains generic managed object definitions for Virtual Private LAN Services as define in [RFC4762] and [RFC4761] This MIB module enables the use of any underlying Pseudowire network. MODULE-IDENTITY .1.3.6.1.4.1.171.10.120.100.4.1 |
vplsNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.120.100.4.1.0 |
vplsStatusChangedThe vplsStatusChanged notification is generated when there is a change in the administrative or operating status of a VPLS service. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.120.100.4.1.0.1 |
vplsFwdFullAlarmRaisedThe vplsFwdFullAlarmRaised notification is generated when the utilization of the Forwarding database is above the value specified by vplsConfigFwdFullHighWatermark. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.120.100.4.1.0.2 |
vplsFwdFullAlarmClearedThe vplsFwdFullAlarmCleared notification is generated when the utilization of the Forwarding database is below the value specified by vplsConfigFwdFullLowWatermark. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.120.100.4.1.0.3 |
vplsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.120.100.4.1.1 |
vplsConfigIndexNextThis object contains an appropriate value to be used for vplsConfigIndex when creating entries in the vplsConfigTable. The value 0 indicates that no unassigned entries are available. To obtain the value of vplsConfigIndex for a new entry in the vplsConfigTable, the manager issues a management protocol retrieval operation to obtain the current value of vplsConfigIndex. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.ro Unsigned32 .1.3.6.1.4.1.171.10.120.100.4.1.1.1 |
vplsConfigTableThis table specifies information for configuring and monitoring Virtual Private Lan Services(VPLS). SEQUENCE OF VplsConfigEntry .1.3.6.1.4.1.171.10.120.100.4.1.1.2 |
vplsConfigEntryA row in this table represents a Virtual Private Lan Service(VPLS) in a packet network. It is indexed by vplsConfigIndex, which uniquely identifies a single VPLS. A row is created by the operator or by the agent if a VPLS service is created by a non-SNMP application or due to the Auto-Discovery process. None of the read-create objects values can be changed when vplsConfigRowStatus is in the active(1) state. Changes are allowed when the vplsConfigRowStatus is in notInService(2) or notReady(3) states only. If the operator needs to change one of the values for an active row the vplsConfigRowStatus should be first changed to notInService(2), the objects may then be changed, and finally the vplsConfigRowStatus should be changed to active(1) in order to re-initiate the signaling process with the new values in effect. VplsConfigEntry .1.3.6.1.4.1.171.10.120.100.4.1.1.2.1 |
vplsConfigIndexUnique index for the conceptual row identifying a VPLS service. Unsigned32 .1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.1 |
vplsConfigNameA textual name of the VPLS. If there is no local name, or this object is otherwise not applicable, then this object MUST contain a zero-length octet string.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.2 |
vplsConfigDescrA textual string containing information about the VPLS service. If there is no information for this VPLS service, then this object MUST contain a zero-length octet string.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.3 |
vplsConfigAdminStatusThe desired administrative state of the VPLS service. If the administrative status of the VPLS service is changed to enabled then this service is able to utilize pseudowires to perform the tasks of a VPLS service. The testing(3) state indicates that no operational packets can be passed.rw Enumeration .1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.4 |
vplsConfigMacLearningThis object specifies if MAC Learning is enabled in this service. If this object is true then MAC Learning is enabled. If false, then MAC Learning is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.6 |
vplsConfigDiscardUnknownDestIf the value of this object is 'true', then frames received with an unknown destination MAC are discarded in this VPLS. If 'false', then the packets are processed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.7 |
vplsConfigMacAgingIf the value of this object is 'true' then the MAC ageing process is enabled in this VPLS. If 'false', then the MAC ageing process is disabledrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.8 |
vplsConfigFwdFullHighWatermarkThis object specifies the utilization of the forwarding database for this VPLS instance at which the vplsFwdFullAlarmRaised notification will be sent.rw Unsigned32 .1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.10 |
vplsConfigFwdFullLowWatermarkThis object specifies the utilization of the forwarding database for this VPLS instance at which the vplsFwdFullAlarmCleared notification will be sent.rw Unsigned32 .1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.11 |
vplsConfigRowStatusFor creating, modifying, and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.12 |
vplsConfigMtuThe value of this object specifies the MTU of this vpls instance. This can be used to limit the MTU to a value lower than the MTU supported by the associated Pseudowiresrw Unsigned32 .1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.13 |
vplsConfigVpnIdThis objects indicates the IEEE 802-1990 VPN ID of the associated VPLS service.ro VPNIdOrZero (VPN-TC-STD-MIB) .1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.14 |
vplsConfigStorageTypeThis variable indicates the storage type for this row.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.15 |
vplsStatusTableThis table provides information for monitoring Virtual Private Lan Services (VPLS). SEQUENCE OF VplsStatusEntry .1.3.6.1.4.1.171.10.120.100.4.1.1.3 |
vplsStatusEntryA row in this table represents a Virtual Private Lan Service(VPLS) in a packet network. It is indexed by vplsConfigIndex, which uniquely identifies a single VPLS. A row in this table is automatically created by the agent when a VPLS service is configured. VplsStatusEntry .1.3.6.1.4.1.171.10.120.100.4.1.1.3.1 |
vplsStatusOperStatusThe current operational state of this VPLS Service.ro Enumeration .1.3.6.1.4.1.171.10.120.100.4.1.1.3.1.1 |
vplsStatusPeerCountThis objects specifies the number of peers (pseudowires) present in this VPLS instance.ro Counter32 .1.3.6.1.4.1.171.10.120.100.4.1.1.3.1.2 |
vplsPwBindTableThis table provides an association between a VPLS service and the corresponding pseudowires. A service can have more than one pseudowire association. Pseudowires are defined in the pwTable SEQUENCE OF VplsPwBindEntry .1.3.6.1.4.1.171.10.120.100.4.1.1.4 |
vplsPwBindEntryEach row represents an association between a VPLS instance and one or more pseudowires defined in the pwTable. Each index is unique in describing an entry in this table. However both indexes are required to define the one to many association of service to pseudowire. VplsPwBindEntry .1.3.6.1.4.1.171.10.120.100.4.1.1.4.1 |
vplsPwBindConfigTypeThe value of this object indicates whether the Pseudo Wire binding was created manually or via Auto-Discovery. The value of this object must be specifed when the row is created and cannot be changed while the row status is active(1)rw Enumeration .1.3.6.1.4.1.171.10.120.100.4.1.1.4.1.1 |
vplsPwBindTypeThe value of this object indicates whether the pseudowire binding is of type mesh or spoke. The value of this object must be specified when the row is created and cannot be changed while the row status is active(1)rw Enumeration .1.3.6.1.4.1.171.10.120.100.4.1.1.4.1.2 |
vplsPwBindRowStatusFor creating, modifying, and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) staterw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.120.100.4.1.1.4.1.3 |
vplsPwBindStorageTypeThis variable indicates the storage type for this row.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.171.10.120.100.4.1.1.4.1.4 |
vplsBgpADConfigTableThis table specifies information for configuring BGP Auto-Discovery parameters for a given VPLS service. SEQUENCE OF VplsBgpADConfigEntry .1.3.6.1.4.1.171.10.120.100.4.1.1.5 |
vplsBgpADConfigEntryA row in this table indicates that BGP based Auto- Discovery is in use for this instance of VPLS. A row in this table is indexed by vplsConfigIndex, which uniquely identifies a single VPLS. None of the read-create objects can be changed when vplsBGPADConfigRowStatus is in active(1) state. Changes are allowed when the vplsBGPADConfigRowStatus is in notInService(2) or notReady(3) states only. If the operator needs to change one of the values for an active row the vplsConfigRowStatus should be first changed to notInService(2), the objects may then be changed, and finally the vplsConfigRowStatus should be changed to active(1) in order to re-initiate the signaling process with the new values in effect. VplsBgpADConfigEntry .1.3.6.1.4.1.171.10.120.100.4.1.1.5.1 |
vplsBgpADConfigRouteDistinguisherThe route distinguisher for this VPLS. See [RFC4364] for a complete definition of a route distinguisher. for more details on use of a route distinguisher for a VPLS service, see [RFC4761]. When not configured, the value is derived from the lower 6 bytes of vplsBgpADConfigVplsId.rw VplsBgpRouteDistinguisher .1.3.6.1.4.1.171.10.120.100.4.1.1.5.1.1 |
vplsBgpADConfigPrefixIn case of auto-discovery the default prefix advertised is the IP address of the loopback. In case the user wants to override the loopback address, vplsBgpADConfigPrefix should be set. When this value is non-zero this value is used along with vplsBgpADConfigRouteDistinguisher in the NLRI, see [RFC 6074]rw Unsigned32 .1.3.6.1.4.1.171.10.120.100.4.1.1.5.1.2 |
vplsBgpADConfigVplsIdVplsId is a unique identifier for all VSIs belonging to the same VPLS. It is advertised as an extended community.rw VplsBgpRouteDistinguisher .1.3.6.1.4.1.171.10.120.100.4.1.1.5.1.3 |
vplsBgpADConfigRowStatusFor creating, modifying, and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.120.100.4.1.1.5.1.4 |
vplsStatusNotifEnableIf this object is set to true(1), then it enables the emission of vplsStatusChanged notification; otherwise this notification is not emitted.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.120.100.4.1.1.7 |
vplsNotificationMaxRateThis object indicates the maximum number of notifications issued per second. If events occur more rapidly, the implementation may simply fail to emit these notifications during that period, or may queue them until an appropriate time. A value of 0 means no throttling is applied and events may be notified at the rate at which they occur.rw Unsigned32 .1.3.6.1.4.1.171.10.120.100.4.1.1.8 |
vplsConformance OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.120.100.4.1.2 |
vplsCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.120.100.4.1.2.1 |
vplsModuleFullComplianceCompliance requirement for implementations that provide full support for VPLS-GENERIC-MIB. Such devices can then be monitored and configured using this MIB module. Unknown .1.3.6.1.4.1.171.10.120.100.4.1.2.1.1 |
vplsModuleReadOnlyComplianceCompliance requirement for implementations that only provide read-only support for VPLS-GENERIC-MIB. Such devices can then be monitored but cannot be configured using this MIB modules. Unknown .1.3.6.1.4.1.171.10.120.100.4.1.2.1.2 |
vplsGroups OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.120.100.4.1.2.2 |
vplsGroupThe group of objects supporting management of L2VPN VPLS services Unknown .1.3.6.1.4.1.171.10.120.100.4.1.2.2.1 |
vplsPwBindGroupThe group of objects supporting management of Pseudo Wire (PW) Binding to VPLS. Unknown .1.3.6.1.4.1.171.10.120.100.4.1.2.2.2 |
vplsNotificationGroupThe group of notifications supporting the Notifications generated for VPLS Services Unknown .1.3.6.1.4.1.171.10.120.100.4.1.2.2.3 |