DEVSW-MIB
Imported Objects
Objects
7 total| Object Name |
|---|
aniDevSoftwareThis group provides information specific to the software image loaded on to the device and the configuration file downloaded. Most of the objects are applicable to both the BSU and SU. However, a few parameters may be device specific, that is, applicable to only BSU or only SU. For eg. aniDevWSSOperatingSoftware is only valid for BSU and not SU. MODULE-IDENTITY .1.3.6.1.4.1.4325.2.2 |
aniDevSwConfigFileThe name of the device configuration file read from the TFTP server.ro DisplayString .1.3.6.1.4.1.4325.2.2.1 |
aniDevSwSystemSoftwareFileThe system software file name.ro DisplayString .1.3.6.1.4.1.4325.2.2.2 |
aniDevSwWssSoftwareFileThe WSS software file name for the BSU. This parameter is applicable only for the BSU. When an SNMP Get request is sent on this parameter on a SU, an empty string is returned since it is not supported. Similarly, when BSU is in point to point mode, this parameter is not valid and returns an empty string. Also, for PacketWave 750, this parameter is not valid and displays an empty string.ro DisplayString .1.3.6.1.4.1.4325.2.2.3 |
aniDevSwVersionThe Software Version.ro DisplayString .1.3.6.1.4.1.4325.2.2.4 |
aniDevSwBuildThe Software Build number.ro Integer32 .1.3.6.1.4.1.4325.2.2.5 |
aniDevSwBuildDateThe Date of the Software Build.ro DisplayString .1.3.6.1.4.1.4325.2.2.6 |
More MIBs from Ani
Browse all AniMIBs →SNMP MIB module
The DEVTRAPS-MIB defines the standard set of SNMP trap definitions used to notify network management systems of critical device events, such as link state changes, hardware failures, and system reboots. It serves as the foundational protocol interface for asynchronous alerting across generic network infrastructure devices, enabling real-time fault detection without requiring active polling.
Standard SNMP MIB module defining data structures for ANIROOT-MIB.
SNMP MIB module
The BSUSTATS-MIB module monitors RF port-level performance, bandwidth allocation, and signal quality metrics for Broadcom (formerly Enterasys) Broadband Service Units (BSUs). It provides specific counters for RF statistics, bandwidth groups, and signal quality tables to facilitate the analysis of cable modem termination system (CMTS) or DOCSIS network health.
The BSUSUSTATUS-MIB enables SNMP monitoring of BSU (Broadband Service Unit) hardware to track the operational state and link status of both upstream and downstream SU (Subscriber Unit) connections via dedicated status tables.