DEVSERVER-MIB
Imported Objects
Objects
8 total| Object Name |
|---|
aniDevServerThis group describes all server related information. It is common for both BSU and SU. MODULE-IDENTITY .1.3.6.1.4.1.4325.2.5 |
aniDevTftpServerThe IP address of the TFTP server responsible for downloading provisioning and configuration parameters to this device. If this parameter is not configured, the value 0.0.0.0 will be returned.ro IpAddress .1.3.6.1.4.1.4325.2.5.1 |
aniDevDhcpServerThe IP address of the DHCP server. If this parameter is not configured, the value 0.0.0.0 will be returned. When BSU is in point to point mode, this parameter is not applicable and will display 0.0.0.0. Similarly, for a PacketWave 610 SU and for PacketWave 750 system, and for SU running in local mode, this object will display 0.0.0.0.ro IpAddress .1.3.6.1.4.1.4325.2.5.2 |
aniDevDhcpLeaseExpirationThe date and time at which the DHCP Lease will Expire. When BSU is in point to point mode, this parameter is not applicable and will display a blank string. Similarly, for a PacketWave 610 SU, this object will display a blank string. The same applies for PacketWave 750 and for SU running in local mode.ro DisplayString .1.3.6.1.4.1.4325.2.5.3 |
aniDevSuDhcpServerThe IP address of the DHCP Server configured on BSU for the SU. When the BSU is in bridge mode, this parameter is not valid. The agent will return 0.0.0.0. If an SNMP Get is sent on SU for this parameter, 0.0.0.0 is returned.ro IpAddress .1.3.6.1.4.1.4325.2.5.4 |
aniDevTimeServerThe IP address of the Time server. It is also known as the SNTP server IP address. On SU, the value 0.0.0.0 will be returned. This object cannot be changed on the SU.rw IpAddress .1.3.6.1.4.1.4325.2.5.5 |
aniDevSyslogServerThe IP address of the syslog server. If this parameter is not configured, the value 0.0.0.0 will be returned.ro IpAddress .1.3.6.1.4.1.4325.2.5.6 |
aniDevSmtpServerThe IP address of the SMTP server. If this parameter is not configured, the value 0.0.0.0 will be returned.rw IpAddress .1.3.6.1.4.1.4325.2.5.7 |
More MIBs from Ani
Browse all AniMIBs →SNMP MIB module
The DEVTRAPS-MIB defines the standard set of SNMP trap definitions used to notify network management systems of critical device events, such as link state changes, hardware failures, and system reboots. It serves as the foundational protocol interface for asynchronous alerting across generic network infrastructure devices, enabling real-time fault detection without requiring active polling.
Standard SNMP MIB module defining data structures for ANIROOT-MIB.
SNMP MIB module
The BSUSTATS-MIB module monitors RF port-level performance, bandwidth allocation, and signal quality metrics for Broadcom (formerly Enterasys) Broadband Service Units (BSUs). It provides specific counters for RF statistics, bandwidth groups, and signal quality tables to facilitate the analysis of cable modem termination system (CMTS) or DOCSIS network health.
The BSUSUSTATUS-MIB enables SNMP monitoring of BSU (Broadband Service Unit) hardware to track the operational state and link status of both upstream and downstream SU (Subscriber Unit) connections via dedicated status tables.