DEVEVENT-MIB
Imported Objects
Objects
7 total| Object Name |
|---|
aniDevEventThis group contains the Event Notification group. Event Notification can be sent through email by configuring the aniDevEvNotify group. Note that the SMTP Server Address (aniDevSmtpServer from the device_server.mib) should also be configured to send email. Currently, viewing/clearing of Event Log Table through SNMP Agent is not supported. MODULE-IDENTITY .1.3.6.1.4.1.4325.2.6 |
aniDevEvNotify OBJECT IDENTIFIER .1.3.6.1.4.1.4325.2.6.2 |
aniDevEmailSendingEnable or disable email sending.rw Enumeration .1.3.6.1.4.1.4325.2.6.2.1 |
aniDevEmailSenderThe email address for the sender.rw DisplayString .1.3.6.1.4.1.4325.2.6.2.2 |
aniDevDomainNameThe domain name.rw DisplayString .1.3.6.1.4.1.4325.2.6.2.3 |
aniDevEmailReceiver1The email address for the first receiver.rw DisplayString .1.3.6.1.4.1.4325.2.6.2.4 |
aniDevEmailReceiver2The email address for the second receiver.rw DisplayString .1.3.6.1.4.1.4325.2.6.2.5 |
More MIBs from Ani
Browse all AniMIBs →SNMP MIB module
The DEVTRAPS-MIB defines the standard set of SNMP trap definitions used to notify network management systems of critical device events, such as link state changes, hardware failures, and system reboots. It serves as the foundational protocol interface for asynchronous alerting across generic network infrastructure devices, enabling real-time fault detection without requiring active polling.
Standard SNMP MIB module defining data structures for ANIROOT-MIB.
SNMP MIB module
The BSUSTATS-MIB module monitors RF port-level performance, bandwidth allocation, and signal quality metrics for Broadcom (formerly Enterasys) Broadband Service Units (BSUs). It provides specific counters for RF statistics, bandwidth groups, and signal quality tables to facilitate the analysis of cable modem termination system (CMTS) or DOCSIS network health.
The BSUSUSTATUS-MIB enables SNMP monitoring of BSU (Broadband Service Unit) hardware to track the operational state and link status of both upstream and downstream SU (Subscriber Unit) connections via dedicated status tables.