DEVCONTROL-MIB
The DEVCONTROL-MIB facilitates remote device management operations on BSU and SU hardware units, specifically enabling system resets and factory default restoration via SNMP. This module provides the control interface for executing critical maintenance and recovery procedures on these specific network appliances.
Imported Objects
Objects
5 total| Object Name |
|---|
aniDevControlThis group allows users to handle device control operations like resetting the device and setting to factory defaults. It can be used for both BSU and SU. MODULE-IDENTITY .1.3.6.1.4.1.4325.2.4 |
aniDevControlResetDeviceSetting this object to true(1) causes the device to reset. Setting the object to false(2) is not allowed. If a Get request is sent before this object is actually set, the value false(2) will be returned.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4325.2.4.1 |
aniDevControlSetFactoryDefaultsThis object provides an option to reset configuration parameters to factory defaults. Setting this object to true(1) allows restoring all configuration parameters to factory default values. Setting the object to false(2) is not allowed. If a Get request is sent before this object is actually set, the value false(2) will be returned. Note: This parameter is not supported for this release. Hence it is defined as a read-only object.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4325.2.4.2 |
aniDevControlStartUploadSetting this object to true(1) causes the device to upload the entire Configuration File onto the TFTP server on the service provider side. aniDevTftpServer is the designated TFTP server used in this upload process. Setting the object to false(2) is not allowed. If a Get request is sent before this object is actually set, the value false(2) will be returned.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4325.2.4.3 |
aniDevControlUploadStateReading this object returns the status of the previous upload process. The possible return values are: successful(1) - upload operation completed successfully failed(2) - upload operation failed If a Get request is sent before aniDevControlStartUpload is actually set, the value successful(1) will be returned by default.ro Enumeration .1.3.6.1.4.1.4325.2.4.4 |
More MIBs from Ani
Browse all AniMIBs →SNMP MIB module
The DEVTRAPS-MIB defines the standard set of SNMP trap definitions used to notify network management systems of critical device events, such as link state changes, hardware failures, and system reboots. It serves as the foundational protocol interface for asynchronous alerting across generic network infrastructure devices, enabling real-time fault detection without requiring active polling.
Standard SNMP MIB module defining data structures for ANIROOT-MIB.
SNMP MIB module
The BSUSTATS-MIB module monitors RF port-level performance, bandwidth allocation, and signal quality metrics for Broadcom (formerly Enterasys) Broadband Service Units (BSUs). It provides specific counters for RF statistics, bandwidth groups, and signal quality tables to facilitate the analysis of cable modem termination system (CMTS) or DOCSIS network health.
The BSUSUSTATUS-MIB enables SNMP monitoring of BSU (Broadband Service Unit) hardware to track the operational state and link status of both upstream and downstream SU (Subscriber Unit) connections via dedicated status tables.