DEVBASE-MIB
The DEVBASE-MIB provides fundamental device identification and status attributes for both Base Station Units (BSU) and Subscriber Units (SU) within the vendor's radio access network infrastructure. This module enables the monitoring of core hardware inventory, operational state, and basic system parameters essential for managing distributed base station deployments.
Imported Objects
Objects
6 total| Object Name |
|---|
aniDevBaseThis group gives some basic information about the device (BSU or SU). All objects within this group are applicable to both the devices. MODULE-IDENTITY .1.3.6.1.4.1.4325.2.1 |
aniDevProductNameThe model number of the device.ro DisplayString .1.3.6.1.4.1.4325.2.1.1 |
aniDevLanIpAddrThe Lan IP Address of the device.ro IpAddress .1.3.6.1.4.1.4325.2.1.2 |
aniDevLanSubnetMaskThe subnet mask of the device.ro IpAddress .1.3.6.1.4.1.4325.2.1.3 |
aniDevDefaultGatewayThe Gateway IP address. On BSU, this refers to the Lan Gateway address. On SU, this refers to the Wireless Gateway address.ro IpAddress .1.3.6.1.4.1.4325.2.1.4 |
aniDevMacAddrThe Mac Address of the device.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4325.2.1.5 |
More MIBs from Ani
Browse all AniMIBs →SNMP MIB module
The DEVTRAPS-MIB defines the standard set of SNMP trap definitions used to notify network management systems of critical device events, such as link state changes, hardware failures, and system reboots. It serves as the foundational protocol interface for asynchronous alerting across generic network infrastructure devices, enabling real-time fault detection without requiring active polling.
Standard SNMP MIB module defining data structures for ANIROOT-MIB.
SNMP MIB module
The BSUSTATS-MIB module monitors RF port-level performance, bandwidth allocation, and signal quality metrics for Broadcom (formerly Enterasys) Broadband Service Units (BSUs). It provides specific counters for RF statistics, bandwidth groups, and signal quality tables to facilitate the analysis of cable modem termination system (CMTS) or DOCSIS network health.
The BSUSUSTATUS-MIB enables SNMP monitoring of BSU (Broadband Service Unit) hardware to track the operational state and link status of both upstream and downstream SU (Subscriber Unit) connections via dedicated status tables.