DES2218-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
115
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
115 total| Object Name |
|---|
dlink OBJECT IDENTIFIER .1.3.6.1.4.1.171 |
RFC-1215 Unknown .1.3.6.1.4.1.171 |
linkChangeEventThe trap is sent whenever the link state of a port changes
from link up to link down or from link down to link up TRAP-TYPE .1.3.6.1.4.1.171.0.1 |
portPartitionThe trap is sent whenever the port state enter the Partion
mode when more than 32 collisions occur while trasmitting. TRAP-TYPE .1.3.6.1.4.1.171.0.2 |
dlink-products OBJECT IDENTIFIER .1.3.6.1.4.1.171.10 |
dlink-Des2218Prod OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.7 |
dlink-Des2218ProdId OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.7.1 |
des2218SwHub OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.7.2 |
dlink-mgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.11 |
agentConfigInfo OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.1 |
agentBasicInfo OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.1.1 |
agentRuntimeSwVersionThis is a textual description of the runtime software version
and revision. If the version number is one and revision number is
zero agentRuntimeSwVersion would be 'Ver. 1.0'ro DisplayString .1.3.6.1.4.1.171.11.1.1.1 |
agentPromFwVersionThis is a textual description of the agent PROM firmware version
and revision. If the version number is one and revision number is
zero agentPromFwVersion would be 'Ver. 1.0'ro DisplayString .1.3.6.1.4.1.171.11.1.1.2 |
agentHwRevisionThis is a textual description of the hardware revision.
The display string should look like 'Rev. A1'ro DisplayString .1.3.6.1.4.1.171.11.1.1.3 |
agentMgmtProtocolCapabilityThe network management protocol(s) supported by this agent.ro Enumeration .1.3.6.1.4.1.171.11.1.1.4 |
agentMibCapabilityTableA list of MIB capability entries supported by this agent. SEQUENCE OF AgentMibCapabilityEntry .1.3.6.1.4.1.171.11.1.1.5 |
agentMibCapabilityEntryA MIB capability entry contains objects describing a particular MIB
supported by this agent. AgentMibCapabilityEntry .1.3.6.1.4.1.171.11.1.1.5.1 |
agentMibCapabilityIndexA list of agentMibCapabilityDescr entries.ro INTEGER .1.3.6.1.4.1.171.11.1.1.5.1.1 |
agentMibCapabilityDescrThe name of the MIB supported by the agent.ro DisplayString .1.3.6.1.4.1.171.11.1.1.5.1.2 |
agentMibCapabilityVersionThe version of the MIB specified in this entry.ro INTEGER .1.3.6.1.4.1.171.11.1.1.5.1.3 |
agentMibCapabilityTypeThe type of the MIB specified in this entry.ro Enumeration .1.3.6.1.4.1.171.11.1.1.5.1.4 |
agentBasicConfig OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.1.2 |
agentSwUpdateModeThe download media used by the system to download the
runtime software.rw Enumeration .1.3.6.1.4.1.171.11.1.2.1 |
agentSwUpdateCtrlCurrent status of software download control. The setting
is effective the next time you reset or power on the hub.rw Enumeration .1.3.6.1.4.1.171.11.1.2.2 |
agentBootFileThe name of the file to be downloaded from the TFTP server when
software update is enabled.rw DisplayString .1.3.6.1.4.1.171.11.1.2.3 |
agentSystemResetThis object indicates the agent system reset state.
Setting this object to no-reset(3) has no effect.
Setting this object to reset(2) will reset the agent.
The agent always returns no-reset(3) when this object is read.rw Enumeration .1.3.6.1.4.1.171.11.1.2.4 |
agentRs232PortConfigThe current setting of RS-232C port.
The RS-232C port can be configured as the console port or
used for out-of-band connection.rw Enumeration .1.3.6.1.4.1.171.11.1.2.5 |
agentOutOfBandBaudRateConfigThe baud rate setting for out of band connection.
The baud rate for the console interface is always 9600.rw Enumeration .1.3.6.1.4.1.171.11.1.2.6 |
agentOutOfBandDialNumberThe dial out phone number for out of band to establish
a connection. This entry is used for reference only.rw DisplayString .1.3.6.1.4.1.171.11.1.2.7 |
agentIpProtoConfig OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.1.3 |
agentIpNumOfIfThe total number of IP interfaces supported by this agent.ro INTEGER .1.3.6.1.4.1.171.11.1.3.1 |
agentIpIfTableA list of IP interface entries supported by the agent. SEQUENCE OF AgentIpIfEntry .1.3.6.1.4.1.171.11.1.3.2 |
agentIpIfEntryAn agentIPIfEntry contains information about a particular
IP interface. AgentIpIfEntry .1.3.6.1.4.1.171.11.1.3.2.1 |
agentIpIfIndexThis object uniquely identifies the IP interface number
in agentIpIfTable.
This value should never greater than agentIpNumOfIfro INTEGER .1.3.6.1.4.1.171.11.1.3.2.1.1 |
agentIpIfAddressThe IP address of the interface.rw IpAddress .1.3.6.1.4.1.171.11.1.3.2.1.2 |
agentIpIfNetMaskThe IP net mask for this interface.rw IpAddress .1.3.6.1.4.1.171.11.1.3.2.1.3 |
agentIpIfDefaultRouterThe default gateway for this IP interface.rw IpAddress .1.3.6.1.4.1.171.11.1.3.2.1.4 |
agentIpIfMacAddrThe MAC address of this IP interface.
For interfaces which do not have such an address
(e.g., a serial line), this object should contain
an octet string of zero length.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.171.11.1.3.2.1.5 |
agentIpIfTypeThe physical layer interface of the IP interface.ro Enumeration .1.3.6.1.4.1.171.11.1.3.2.1.6 |
agentIpBootServerAddrThe IP Address of Boot Server.rw IpAddress .1.3.6.1.4.1.171.11.1.3.3 |
agentIpBootProtocolThe software download protocol used for software update.rw Enumeration .1.3.6.1.4.1.171.11.1.3.4 |
agentIpGetIpFromBootpServerThis object indicates whether the agent get its system IP address
from BootP server at start up.rw Enumeration .1.3.6.1.4.1.171.11.1.3.5 |
agentIpUnauthAddrThe IP address of an unauthorized SNMP packet.ro IpAddress .1.3.6.1.4.1.171.11.1.3.6 |
agentIpUnauthCommThe community string of an unauthorized SNMP packet.ro DisplayString .1.3.6.1.4.1.171.11.1.3.7 |
agentIpLastBootServerAddrThe last IP address used as Boot server IP address.ro IpAddress .1.3.6.1.4.1.171.11.1.3.8 |
agentIpLastIpAddrThe last IP address used as the agent system IP address.ro IpAddress .1.3.6.1.4.1.171.11.1.3.9 |
agentIpTrapManagerTableA list of trap manager entries to which to send SNMP traps . SEQUENCE OF AgentIpTrapManagerEntry .1.3.6.1.4.1.171.11.1.3.10 |
agentIpTrapManagerEntryThis entry contains the particular trap manager settings. AgentIpTrapManagerEntry .1.3.6.1.4.1.171.11.1.3.10.1 |
agentIpTrapManagerIpAddrThe IP address to receive SNMP traps from this device.ro IpAddress .1.3.6.1.4.1.171.11.1.3.10.1.1 |
agentIpTrapManagerCommThe community string of the SNMP trap packet sent to
the trap manager.rw DisplayString .1.3.6.1.4.1.171.11.1.3.10.1.2 |
agentIpTrapManagerStatusThis object indicates whether or not the trap should be send to this
trap manager.rw Enumeration .1.3.6.1.4.1.171.11.1.3.10.1.3 |
des2218series OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.7 |
des2218MIB OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.7.1 |
swDevicePackage OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.7.1.1 |
swDeviceInfo OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.7.1.1.1 |
swDevInfoTotalNumOfPortThe number of ports within this switch hub. This value
is the sum of the ports of each group within this
switch hub.ro INTEGER .1.3.6.1.4.1.171.11.7.1.1.1.1 |
swDevInfoNumOfPortOnUseThe number of ports in this switch hub connected to the
segment or end stations.ro INTEGER .1.3.6.1.4.1.171.11.7.1.1.1.2 |
swDevInfoDescA textual description of this switch hub.ro DisplayString .1.3.6.1.4.1.171.11.7.1.1.1.3 |
swDevInfoPortTypeThe connector type of this port.ro Enumeration .1.3.6.1.4.1.171.11.7.1.1.1.4 |
swDevInfoHwRevA textual description of the hardware revision of
this switch bub.ro DisplayString .1.3.6.1.4.1.171.11.7.1.1.1.5 |
swDevInfoSystemUpTimeThe value of sysUpTime at the time the switch
entered its current operational state. If the
current state was entered prior to the last re-
initialization, then this object contains a zero
value.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.171.11.7.1.1.1.6 |
swDevInfoFrontPanelLedStatusThe current status of front panel LED.ro OCTET STRING .1.3.6.1.4.1.171.11.7.1.1.1.7 |
swDevInfoDramSizeThe DRAM size of the switch hubro INTEGER .1.3.6.1.4.1.171.11.7.1.1.1.8 |
swDeviceCtl OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.7.1.1.2 |
swDevCtrlDisableLearningStateThis Object indicate the switch hub wether or not learn any
new addresses from the Ethernet ports.rw Enumeration .1.3.6.1.4.1.171.11.7.1.1.2.1 |
swDevCtrlResetThis object indicates the switch hub reset state.
Setting this object to no-reset(3) has no effect.
Setting this object to reset(2) will reset the agent.
The agent always returns no-reset(3) when this object is read.rw Enumeration .1.3.6.1.4.1.171.11.7.1.1.2.2 |
swDevCtrlSpanningTreeThis Object control the device to enable/disable spanning
tree algorithm in the system initilization or reset.rw Enumeration .1.3.6.1.4.1.171.11.7.1.1.2.3 |
swPortPackage OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.7.1.2 |
swPortInfoTableA list of port information entries. SEQUENCE OF SwPortInfoEntry .1.3.6.1.4.1.171.11.7.1.2.1 |
swPortInfoEntryThis entry contains the port information, like porttype,
linkstatus... SwPortInfoEntry .1.3.6.1.4.1.171.11.7.1.2.1.1 |
swPortInfoGroupIndexThis object identifies the port within the group for
which this entry contains infomation.ro INTEGER .1.3.6.1.4.1.171.11.7.1.2.1.1.1 |
swPortInfoIndexThis object indicate switch hub port number.ro INTEGER .1.3.6.1.4.1.171.11.7.1.2.1.1.2 |
swPortInfoTypeThe connector type of this port.ro Enumeration .1.3.6.1.4.1.171.11.7.1.2.1.1.3 |
swPortInfoPartitionStatusThis Object indicate the port partition status.ro Enumeration .1.3.6.1.4.1.171.11.7.1.2.1.1.4 |
swPortInfoLinkStatusThis Object indicate the port link test status.ro Enumeration .1.3.6.1.4.1.171.11.7.1.2.1.1.5 |
swPortInfoDuplexModeThis Object indicate the port work in which duplex mode.ro Enumeration .1.3.6.1.4.1.171.11.7.1.2.1.1.6 |
swPortInfoNegotiationStatusThis Object indicate the port work in auto negotiation
enabled or disabled.ro Enumeration .1.3.6.1.4.1.171.11.7.1.2.1.1.7 |
swPortInfoSpeedStatusThis Object indicate the port trasmit rate is in 10M bps
or 100M bps .ro Enumeration .1.3.6.1.4.1.171.11.7.1.2.1.1.8 |
swPortCtrlTableA list of port state control entries. SEQUENCE OF SwPortCtrlEntry .1.3.6.1.4.1.171.11.7.1.2.2 |
swPortCtrlEntryThis entry control the port state, like filter broadcast,
linkstatus... SwPortCtrlEntry .1.3.6.1.4.1.171.11.7.1.2.2.1 |
swPortCtrlGroupIndexThis object identifies the port within the group for
which this entry contains infomation.ro INTEGER .1.3.6.1.4.1.171.11.7.1.2.2.1.1 |
swPortCtrlIndexThis object indicate switch hub port number.ro INTEGER .1.3.6.1.4.1.171.11.7.1.2.2.1.2 |
swPortCtrlAdminStatePort control administration state.rw Enumeration .1.3.6.1.4.1.171.11.7.1.2.2.1.3 |
swPortCtrlDuplexStateIndicating the port work in half/full duplex mode.rw Enumeration .1.3.6.1.4.1.171.11.7.1.2.2.1.4 |
swPortCtrlLinkStatusAlarmStateDepending on this object to determine wether send a trap or
not when link status change .rw Enumeration .1.3.6.1.4.1.171.11.7.1.2.2.1.5 |
swPortCtrlFilterBcastStatePort control filter broadcast to all port or discard.rw Enumeration .1.3.6.1.4.1.171.11.7.1.2.2.1.6 |
swPortCtrlForwardUnknowStatePort control forward unknow packet state.rw Enumeration .1.3.6.1.4.1.171.11.7.1.2.2.1.7 |
swPortCtrlPartitionStatusDepending on this object determine to send a trap or not when
the port was partition.rw Enumeration .1.3.6.1.4.1.171.11.7.1.2.2.1.8 |
swPortCtrlNegotiationStatusDepending on this object determine to enable NWAY or disable.rw Enumeration .1.3.6.1.4.1.171.11.7.1.2.2.1.9 |
swPortCtrlSpeedStatusDepending on this object to determining this port transmit
rate is 10M bps or 100M bps.rw Enumeration .1.3.6.1.4.1.171.11.7.1.2.2.1.10 |
swPortCounterTableA list of port MIB statistic Counter entries. SEQUENCE OF SwPortCounterEntry .1.3.6.1.4.1.171.11.7.1.2.3 |
swPortCounterEntryThis entry include all the port Counter which support by
DES3208, like Bytes received, Bytes Sent ... SwPortCounterEntry .1.3.6.1.4.1.171.11.7.1.2.3.1 |
swPortCounterGroupIndexThis object identifies the port within the group for
which this entry contains infomation.ro INTEGER .1.3.6.1.4.1.171.11.7.1.2.3.1.1 |
swPortCounterIndexThis object indicate switch hub port number.ro INTEGER .1.3.6.1.4.1.171.11.7.1.2.3.1.2 |
swPortBytesReceivedThe number of good bytes received. Local and dropped packets
increment the counter as well.ro Counter .1.3.6.1.4.1.171.11.7.1.2.3.1.3 |
swPortBytesSentThe number of good bytes sent.ro Counter .1.3.6.1.4.1.171.11.7.1.2.3.1.4 |
swPortFramesReceivedThe number of good frames received. Local and dropped packets
increment the counter as well.ro Counter .1.3.6.1.4.1.171.11.7.1.2.3.1.5 |
swPortFramesSentThe number of good frames sent.ro Counter .1.3.6.1.4.1.171.11.7.1.2.3.1.6 |
swPortTotalBytesReceivedThe number of bytes received(good and bad).ro Counter .1.3.6.1.4.1.171.11.7.1.2.3.1.7 |
swPortTotalFramesReceivedThe number of frames bytes received(good and bad).ro Counter .1.3.6.1.4.1.171.11.7.1.2.3.1.8 |
swPortBroadcastFramesReceivedThe number of good broadcast frames received. Local and dropped
packets increment the counter as well.ro Counter .1.3.6.1.4.1.171.11.7.1.2.3.1.9 |
swPortMulticastFramesReceivedThe number of good multicast frames received. Local and dropped
packets increment the counter as well.ro Counter .1.3.6.1.4.1.171.11.7.1.2.3.1.10 |
swPortCRCErrorThe number of frames with valid packet length and CRC error or
misaligned(odd number of nibbles)
increment the counter as well.ro Counter .1.3.6.1.4.1.171.11.7.1.2.3.1.11 |
swPortOversizeFramesThe number of good frames with length more than 1518 bytes (
or 1522 bytes for LongEn = 1).ro Counter .1.3.6.1.4.1.171.11.7.1.2.3.1.12 |
swPortFragmentsThe number of good bytes received. Local and dropped packets
increment the counter as well.ro Counter .1.3.6.1.4.1.171.11.7.1.2.3.1.13 |
swPortJabberThe number of frames with length more than 1518 bytes and with
CRC error or misaligned.ro Counter .1.3.6.1.4.1.171.11.7.1.2.3.1.14 |
swPortCollisionThe number of Collisionsro Counter .1.3.6.1.4.1.171.11.7.1.2.3.1.15 |
swPortLateCollisionThe number of Late Collision(collision occurring later than
576th transmitted bitro Counter .1.3.6.1.4.1.171.11.7.1.2.3.1.16 |
swPortFrames64BytesThe number of good packets with length of 64 bytesro Counter .1.3.6.1.4.1.171.11.7.1.2.3.1.17 |
swPortFrames65To127BytesThe number of good packets with length between 65 to 127 bytesro Counter .1.3.6.1.4.1.171.11.7.1.2.3.1.18 |
swPortFrames128To255BytesThe number of good packets with length between 128 to 255 bytesro Counter .1.3.6.1.4.1.171.11.7.1.2.3.1.19 |
swPortFrames256To511BytesThe number of good packets with length between 256 to 511 bytesro Counter .1.3.6.1.4.1.171.11.7.1.2.3.1.20 |
swPortFrames512To1023BytesThe number of good packets with length between 512 to 1023 bytesro Counter .1.3.6.1.4.1.171.11.7.1.2.3.1.21 |
swPortFrames1024To1522BytesThe number of good packets with length between 1024 to 1522 bytesro Counter .1.3.6.1.4.1.171.11.7.1.2.3.1.22 |
swPortMACRxErrorThe number of frames with RX MAC Errorro Counter .1.3.6.1.4.1.171.11.7.1.2.3.1.23 |
More MIBs from D-Link
Browse all D-LinkMIBs →DGS-1210-28XME-BX
SNMP MIB module
2033 objects→
DGS-1210-12TSME-BX
The DGS-1210-12TSME-BX MIB module provides management capabilities for the D-Link DES-1210-52ME switch, specifically enabling the monitoring and configuration of QinQ (802.1ad) VLAN encapsulation parameters, including inner tag insertion and drop counters for unmatched traffic. This module facilitates precise control over service provider bridging (SPB) operations by exposing metrics related to VLAN tag manipulation and packet discard events on the device's managed ports.
2030 objects→
DGS-1210-28XSME-BX
SNMP MIB module
2016 objects→
DGS-1210-28PME_AX
Standard SNMP MIB module defining data structures for DGS-1210-28PME_AX.
1942 objects→
DGS-1210-28ME_AX
Standard SNMP MIB module defining data structures for DGS-1210-28ME_AX.
1941 objects→
DGS-1210-20ME_AX
Standard SNMP MIB module defining data structures for DGS-1210-20ME_AX.
1941 objects→