DES-2110-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
113
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
113 total| Object Name |
|---|
d-link OBJECT IDENTIFIER .1.3.6.1.4.1.171 |
IMPORTS Unknown .1.3.6.1.4.1.171 |
dlink-products OBJECT IDENTIFIER .1.3.6.1.4.1.171.10 |
dlink-DES21XXSeriesProd OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.61 |
des-2110 OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.61.1 |
swFiberInsertFiber insert trap TRAP-TYPE .1.3.6.1.4.1.171.10.61.1.0.1 |
swFiberRemoveFiber remove trap TRAP-TYPE .1.3.6.1.4.1.171.10.61.1.0.2 |
swFiberAbnormalRXErrorFiber abnormal rx error trap TRAP-TYPE .1.3.6.1.4.1.171.10.61.1.0.3 |
swFiberAbnormalTXErrorFiber abnormal tx error trap TRAP-TYPE .1.3.6.1.4.1.171.10.61.1.0.4 |
swTPAbnormalRXErrorTwisted Pair abnormal rx error trap TRAP-TYPE .1.3.6.1.4.1.171.10.61.1.0.5 |
swTPAbnormalTXErrorTwisted Pair abnormal tx error trap TRAP-TYPE .1.3.6.1.4.1.171.10.61.1.0.6 |
companyCommGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.61.1.1 |
commSetTableA list of SNMP Set Community Entries SEQUENCE OF CommSetEntry .1.3.6.1.4.1.171.10.61.1.1.1 |
commSetEntryA list of SNMP Set Community properties CommSetEntry .1.3.6.1.4.1.171.10.61.1.1.1.1 |
commSetIndexAn index that uniquely identifies an entry in the
Community Table. Eight entries are currently supported.ro INTEGER .1.3.6.1.4.1.171.10.61.1.1.1.1.1 |
commSetNameThe name of this SNMP Set Community Entry.rw DisplayString .1.3.6.1.4.1.171.10.61.1.1.1.1.2 |
commSetStatusThe RowStatus for the Set Community entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.61.1.1.1.1.3 |
commGetTableA list of SNMP Get Community Entries SEQUENCE OF CommGetEntry .1.3.6.1.4.1.171.10.61.1.1.2 |
commGetEntryA list of SNMP Get Community properties CommGetEntry .1.3.6.1.4.1.171.10.61.1.1.2.1 |
commGetIndexAn index that uniquely identifies an entry in the
Community Table. Eight entries are currently supported.ro INTEGER .1.3.6.1.4.1.171.10.61.1.1.2.1.1 |
commGetNameThe name of this SNMP Get Community Entry.rw DisplayString .1.3.6.1.4.1.171.10.61.1.1.2.1.2 |
commGetStatusThe RowStatus for the Get Community entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.61.1.1.2.1.3 |
commTrapTableA list of SNMP Trap Community Entries SEQUENCE OF CommTrapEntry .1.3.6.1.4.1.171.10.61.1.1.3 |
commTrapEntryA list of SNMP Trap Community properties CommTrapEntry .1.3.6.1.4.1.171.10.61.1.1.3.1 |
commTrapIndexAn index that uniquely identifies an entry in the
Community Table. Eight entries are currently supported.ro INTEGER .1.3.6.1.4.1.171.10.61.1.1.3.1.1 |
commTrapNameThe name of this SNMP Trap Community Entry.rw DisplayString .1.3.6.1.4.1.171.10.61.1.1.3.1.2 |
commTrapIpAddressThe IP Address of this SNMP Trap Community Entry.rw IpAddress .1.3.6.1.4.1.171.10.61.1.1.3.1.3 |
commTrapVlanIdThe Trap VLAN identifier of this SNMP Trap Community Entry.
The value must be from 1 to 4094.rw INTEGER .1.3.6.1.4.1.171.10.61.1.1.3.1.4 |
commTrapSNMPBootupBootup traprw Enumeration .1.3.6.1.4.1.171.10.61.1.1.3.1.5 |
commTrapSNMPTPLinkUpDownTwisted Pair link up / link down traprw Enumeration .1.3.6.1.4.1.171.10.61.1.1.3.1.6 |
commTrapSNMPFiberLinkUpDownFiber link up / link down traprw Enumeration .1.3.6.1.4.1.171.10.61.1.1.3.1.7 |
commTrapTrapAbnormalTPRXErrorTwisted Pair abnormal receive error traprw Enumeration .1.3.6.1.4.1.171.10.61.1.1.3.1.9 |
commTrapTrapAbnormalTPTXErrorTwisted Pair abnormal transmit error traprw Enumeration .1.3.6.1.4.1.171.10.61.1.1.3.1.10 |
commTrapTrapAbnormalFiberRXErrorFiber abnormal receive error traprw Enumeration .1.3.6.1.4.1.171.10.61.1.1.3.1.11 |
commTrapTrapAbnormalFiberTXErrorFiber abnormal transmit error traprw Enumeration .1.3.6.1.4.1.171.10.61.1.1.3.1.12 |
commTrapStatusThe RowStatus for the Trap Community entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.61.1.1.3.1.13 |
companyMiscGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.61.1.3 |
miscResetPhysically resets the unit - use with care. A (1) resets
the unit, a (2) does nothing.rw Enumeration .1.3.6.1.4.1.171.10.61.1.3.2 |
miscStatisticsResetResets the units statistics. A (1) resets
the unit, a (2) does nothing.rw Enumeration .1.3.6.1.4.1.171.10.61.1.3.3 |
companySpanGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.61.1.4 |
spanOnOffEnable/Disable Spanning Tree. A (1) enables, a (2) disables.rw Enumeration .1.3.6.1.4.1.171.10.61.1.4.1 |
companyConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.61.1.11 |
configVerSwPrimaryThe software image version stringro DisplayString .1.3.6.1.4.1.171.10.61.1.11.1 |
configVerHwChipSetThe hardware chipset version stringro DisplayString .1.3.6.1.4.1.171.10.61.1.11.2 |
configPortTableA list of interface entries used for enterprise specific
configuration. The number of entries is given by the value
of ifNumber. All interface entries are assumed to be
Ethernet interafaces. SEQUENCE OF ConfigPortEntry .1.3.6.1.4.1.171.10.61.1.11.6 |
configPortEntryAn enterprise specific interface entry. ConfigPortEntry .1.3.6.1.4.1.171.10.61.1.11.6.1 |
configPortA unique value for each interface that correlates to ifIndex.
Its value ranges between 1 and the value of ifNumber.ro INTEGER .1.3.6.1.4.1.171.10.61.1.11.6.1.1 |
configPortSpeedThe port's speed desired state.rw Enumeration .1.3.6.1.4.1.171.10.61.1.11.6.1.2 |
configPortOperStatusThe port's operating speed state.ro Enumeration .1.3.6.1.4.1.171.10.61.1.11.6.1.3 |
configPortFlowControlThe port will avoid transmitting a new packet
for the period of time specified in a received
PAUSE packet when enabled.rw Enumeration .1.3.6.1.4.1.171.10.61.1.11.6.1.4 |
configPortFlowControlOperThe port's operating flow control state.ro Enumeration .1.3.6.1.4.1.171.10.61.1.11.6.1.5 |
configPortPriorityThe port's current priority.rw Enumeration .1.3.6.1.4.1.171.10.61.1.11.6.1.6 |
configVLANModeDetermines the VLAN mode.rw Enumeration .1.3.6.1.4.1.171.10.61.1.11.7 |
configMirrorTableA list of the Mirror SEQUENCE OF ConfigMirrorEntry .1.3.6.1.4.1.171.10.61.1.11.8 |
configMirrorEntryA Mirror entry containing the Mirror id and mode ConfigMirrorEntry .1.3.6.1.4.1.171.10.61.1.11.8.1 |
configMirrorIdAn index that uniquely identifies an entry in the
Mirror Table. One entries are currently supported.ro INTEGER (1) .1.3.6.1.4.1.171.10.61.1.11.8.1.1 |
configMirrorModeWhen deciding the mirroring source port, then Mirror mode will
be available.rw Enumeration .1.3.6.1.4.1.171.10.61.1.11.8.1.2 |
configMirrorMonWhen mirroring is enabled (configMirroringMode =
ingress, egress, both), this identifies the mirroring monitoring
port. This value has a valid range of 1 to ifNumber when
enabled.rw INTEGER .1.3.6.1.4.1.171.10.61.1.11.8.1.3 |
configMirrorSrcWhen mirroring is enabled (configMirroringMode =
ingress, egress, both), this identifies the mirroring source port.
This value has a valid range of 1 to ifNumber when enbaled.
Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port
of the bridge is represented by a single bit within the
value of this object. If that bit has a value of '1'
then that port is included in the set of ports; the port
is not included if its bit has a value of '0'.rw PortList .1.3.6.1.4.1.171.10.61.1.11.8.1.4 |
configMirrorStatusThe RowStatus for the Mirror entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.61.1.11.8.1.5 |
configSNMPEnableEnable/Disable SNMP function. A (1) enables, a (2) disables.rw Enumeration .1.3.6.1.4.1.171.10.61.1.11.9 |
configIpAssignmentModeIndicates whether the device address is assigned by
the user (manual), or DHCP, or Others(BootP).rw Enumeration .1.3.6.1.4.1.171.10.61.1.11.12 |
configPhysAddressThe interface's address at the protocol layer
immediately 'below' the network layer in the
protocol stack. This is the physical address
for the end-station.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.61.1.11.13 |
configPasswordAdminThe adminstrator passwordrw DisplayString .1.3.6.1.4.1.171.10.61.1.11.15 |
configIpAddressThe IP Address for the RDU box.rw IpAddress .1.3.6.1.4.1.171.10.61.1.11.16 |
configNetMaskThe network mask for the RDU box.rw IpAddress .1.3.6.1.4.1.171.10.61.1.11.17 |
configGatewayThe Gatway Address for the unit.rw IpAddress .1.3.6.1.4.1.171.10.61.1.11.18 |
configSavePhysically saves the current configuration to nvram.
- use with care.
(1) saves the configuration
(2) does nothing.rw Enumeration .1.3.6.1.4.1.171.10.61.1.11.19 |
configRestoreDefaultsRestores the configuration of the unit to the
original settings.rw Enumeration .1.3.6.1.4.1.171.10.61.1.11.22 |
companyPVlanGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.61.1.12 |
pvlanTableA list of the Port-based VLANs SEQUENCE OF PvlanEntry .1.3.6.1.4.1.171.10.61.1.12.1 |
pvlanEntryA Port-based VLAN entry containing the id and name. PvlanEntry .1.3.6.1.4.1.171.10.61.1.12.1.1 |
pvlanIdThe VLAN identifier. A maximum of 28 VLANs is supported.
The value must be from 1 to 28ro INTEGER .1.3.6.1.4.1.171.10.61.1.12.1.1.1 |
pvlanNameThe VLAN name associated with the Id.rw DisplayString .1.3.6.1.4.1.171.10.61.1.12.1.1.2 |
pvlanMemberThe set of the device's member ports that belong
to the VLAN.
Each octet within the value of this object specifies a
set of eight ports, with the first octet specifying ports
1 through 8, the second octet specifying ports 9
through 16, etc. Within each octet, the most
significant bit represents the lowest numbered
port, and the least significant bit represents the
highest numbered port. Thus, each port of the
VLAN is represented by a single bit within the
value of this object. If that bit has a value of
'1' then that port is included in the set of
ports; the port is not included if its bit has a
value of '0'.rw PortList .1.3.6.1.4.1.171.10.61.1.12.1.1.3 |
pvlanStatusThe status of an entry in the VLAN Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available.rw Enumeration .1.3.6.1.4.1.171.10.61.1.12.1.1.5 |
companyTVlanGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.61.1.13 |
tvlanTableA list of the VLANs SEQUENCE OF TvlanEntry .1.3.6.1.4.1.171.10.61.1.13.1 |
tvlanEntryA VLAN entry containing the VLAN id and name. TvlanEntry .1.3.6.1.4.1.171.10.61.1.13.1.1 |
tvlanIdThe VLAN identifier. A maximum of 64 VLANs is supported.
The value must be from 1 to 4094.ro INTEGER .1.3.6.1.4.1.171.10.61.1.13.1.1.1 |
tvlanMemberThe set of the device's member ports that belong
to the VLAN.
Each octet within the value of this object specifies a
set of eight ports, with the first octet specifying ports
1 through 8, the second octet specifying ports 9
through 16, etc. Within each octet, the most
significant bit represents the lowest numbered
port, and the least significant bit represents the
highest numbered port. Thus, each port of the
VLAN is represented by a single bit within the
value of this object. If that bit has a value of
'1' then that port is included in the set of
ports; the port is not included if its bit has a
value of '0'.rw PortList .1.3.6.1.4.1.171.10.61.1.13.1.1.3 |
tvlanUntaggedPortsIf that bit has a value of '1' the outgoing frame on the egress
port is untagged. If that bit has a value of '0' the outgoing
frame on the egress port is tagged.rw PortList .1.3.6.1.4.1.171.10.61.1.13.1.1.4 |
tvlanStatusThe status of an entry in the VLAN Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available.rw Enumeration .1.3.6.1.4.1.171.10.61.1.13.1.1.5 |
tvlanPortTableA list of ports and their associated VLAN. SEQUENCE OF TvlanPortEntry .1.3.6.1.4.1.171.10.61.1.13.2 |
tvlanPortEntryInformation pertaining to an individual port regarding
to which VLAN it belongs. TvlanPortEntry .1.3.6.1.4.1.171.10.61.1.13.2.1 |
tvlanPortPortIdA port identifier that is in the range of 1 to ifNumber.ro INTEGER .1.3.6.1.4.1.171.10.61.1.13.2.1.1 |
tvlanPortVlanIdThe default VLAN identifier.rw INTEGER .1.3.6.1.4.1.171.10.61.1.13.2.1.2 |
tvlanPortPriorityThe default priority.rw INTEGER .1.3.6.1.4.1.171.10.61.1.13.2.1.3 |
tvlanManagementThe management vlan which allow to forwarding to cpu.rw INTEGER .1.3.6.1.4.1.171.10.61.1.13.3 |
companyStaticGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.61.1.21 |
staticOnOffEnable/Disable Static MAC. A (1) enables, a (2) disables.rw Enumeration .1.3.6.1.4.1.171.10.61.1.21.1 |
staticAutoLearningThe set of the device's member ports that belong
to the Static MAC auto learning enable/disable.
Each octet within the value of this object specifies a
set of eight ports, with the first octet specifying ports
1 through 8, the second octet specifying ports 9
through 16, etc. Within each octet, the most
significant bit represents the lowest numbered
port, and the least significant bit represents the
highest numbered port. Thus, each port is represented
by a single bit within the value of this object.
If that bit has a value of '1' then that port is in auto
learning enable state; the port is not in auto learning
state if its bit has a value of '0'.rw PortList .1.3.6.1.4.1.171.10.61.1.21.2 |
staticTableA list of the Static MACs SEQUENCE OF StaticEntry .1.3.6.1.4.1.171.10.61.1.21.3 |
staticEntryA Static MAC entry containing the mac and forwarding port. StaticEntry .1.3.6.1.4.1.171.10.61.1.21.3.1 |
staticIdThe Static MAC identifier. A maximum of 60 Static MACs is supported.
The value must be from 1 to 60ro INTEGER .1.3.6.1.4.1.171.10.61.1.21.3.1.1 |
staticMacThe Static MAC associated with the Id.rw DisplayString .1.3.6.1.4.1.171.10.61.1.21.3.1.2 |
staticPortThe Static MAC forwarding port with the ID.rw INTEGER .1.3.6.1.4.1.171.10.61.1.21.3.1.3 |
staticVlanIDThe Static MAC VLAN ID with the ID.rw INTEGER .1.3.6.1.4.1.171.10.61.1.21.3.1.4 |
staticStatusThe status of an entry in the Static MAC Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available.rw Enumeration .1.3.6.1.4.1.171.10.61.1.21.3.1.5 |
companyIgsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.61.1.22 |
igsSystem OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.61.1.22.1 |
igsStatusEnables or disables IGMP snooping in the systemrw Enumeration .1.3.6.1.4.1.171.10.61.1.22.1.2 |
igsRouterPortPurgeIntervalThis is the interval (in seconds) after which a learnt
router port entry will be purged.
For each router port learnt, a 'RouterPortPurgeTimer' runs for
'RouterPortPurgeInterval'.
This timer will be restarted whenever a router control message is
received over that port. If no router control mssages are received
for 'RouterPortPurgeInterval' time, the learnt router port entry
will be purgedrw INTEGER .1.3.6.1.4.1.171.10.61.1.22.1.4 |
igsHostPortPurgeIntervalThis is the interval (in seconds) after which a learnt
host port entry will be purged.
For each host port learnt, a 'PortPurgeTimer' runs for
'HostPortPurgeInterval'.
This timer will be restarted whenever a report message from host is
received over that port. If no report mssages are received
for 'HostPortPurgeInterval' time, the learnt host entry
will be purged from the multicast grouprw INTEGER .1.3.6.1.4.1.171.10.61.1.22.1.5 |
igsBrg OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.61.1.22.2 |
igsBrgRouterPortListContains list of bridge ports through which a router
is reachable. These router ports can be learnt through
control messages received from routers, and statically
configuredrw PortList .1.3.6.1.4.1.171.10.61.1.22.2.1 |
igsBrgMcastFwdTableThis table contains multicast forwarding information
learnt when VLAN is DISABLED in the system. SEQUENCE OF IgsBrgMcastFwdEntry .1.3.6.1.4.1.171.10.61.1.22.2.2 |
igsBrgMcastFwdEntryThis table contains multicast group address and the
list of ports who have members for the multicast group. IgsBrgMcastFwdEntry .1.3.6.1.4.1.171.10.61.1.22.2.2.1 |
igsBrgMcastFwdGroupAddressMAC multicast group address. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.61.1.22.2.2.1.1 |
igsBrgMcastFwdPortListMacList of ports who have members for the MAC multicast
group.ro PortList .1.3.6.1.4.1.171.10.61.1.22.2.2.1.2 |
companyStormCtrlGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.61.1.23 |
stormctrlOnOffEnable/Disable ARP STORM CONTROL. A (1) enables, a (2) disables.rw Enumeration .1.3.6.1.4.1.171.10.61.1.23.1 |
stormctrlStatusUnlock ARP STORM CONTROL mechanism. A (1) locked, a (2) unlock.rw Enumeration .1.3.6.1.4.1.171.10.61.1.23.2 |