DECATM-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for DECATM-MIB.
106
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
106 total| Object Name |
|---|
dec OBJECT IDENTIFIER .1.3.6.1.4.1.36 |
RFC1155-SMI Unknown .1.3.6.1.4.1.36 |
ema OBJECT IDENTIFIER .1.3.6.1.4.1.36.2 |
sysobjid OBJECT IDENTIFIER .1.3.6.1.4.1.36.2.15 |
atmSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.36.2.15.14 |
atmSwitch1 OBJECT IDENTIFIER .1.3.6.1.4.1.36.2.15.14.1 |
atmversion1 OBJECT IDENTIFIER .1.3.6.1.4.1.36.2.15.14.1.1 |
atmSwitch2 OBJECT IDENTIFIER .1.3.6.1.4.1.36.2.15.14.2 |
atmversion2 OBJECT IDENTIFIER .1.3.6.1.4.1.36.2.15.14.2.1 |
decMIBextension OBJECT IDENTIFIER .1.3.6.1.4.1.36.2.18 |
atmExpand OBJECT IDENTIFIER .1.3.6.1.4.1.36.2.18.17 |
ad OBJECT IDENTIFIER .1.3.6.1.4.1.36.2.18.17.1 |
adUID48 bit User Identification number assigned
to the ATM device.ro OCTET STRING .1.3.6.1.4.1.36.2.18.17.1.1 |
adEscapeSupportIndicates if the VCI 16 can be used to carry
configuration management traffic with a escape
sequence 0x55 (instead of SNMP ASN.1 header).ro Enumeration .1.3.6.1.4.1.36.2.18.17.1.2 |
adFlowMasterIndicates if FLOWmaster flow control is
supported on this device.ro Enumeration .1.3.6.1.4.1.36.2.18.17.1.3 |
adRVCIndicates if Resilient Virtual Circuits (RVCs)
are supported on this device.ro Enumeration .1.3.6.1.4.1.36.2.18.17.1.4 |
adObjectIdSwitch, none, unknown.ro INTEGER .1.3.6.1.4.1.36.2.18.17.1.5 |
adObjectSubIdan3, an2, none, unknown.ro INTEGER .1.3.6.1.4.1.36.2.18.17.1.6 |
adNumPortsIndicates number of ATM ports on this device.
adNumLinks is the number of rows in the
adPortTable.ro INTEGER .1.3.6.1.4.1.36.2.18.17.1.7 |
adPortTableA list of the link attributes on a per port basis.
The number of entries is given in adNumPorts. SEQUENCE OF AdPortTableEntry .1.3.6.1.4.1.36.2.18.17.1.8 |
adPortTableEntryContains the characteristics of ATM ports. AdPortTableEntry .1.3.6.1.4.1.36.2.18.17.1.8.1 |
adpPortIndexA unique value which identifies the ATM Port
Number. The value 0 has a special meaning and identifies the
local port INTEGER .1.3.6.1.4.1.36.2.18.17.1.8.1.1 |
adpTypeType: qlv1, none, unknown.ro INTEGER .1.3.6.1.4.1.36.2.18.17.1.8.1.2 |
adpSubTypeSubtye: ver0, none, unknown.ro INTEGER .1.3.6.1.4.1.36.2.18.17.1.8.1.3 |
adpFlowMasterIndicates if FLOWmaster flow control is
supported on this device.ro Enumeration .1.3.6.1.4.1.36.2.18.17.1.8.1.4 |
adpCreditResyncThe type of the credit resynchronization used
by the flow control on this link.ro Enumeration .1.3.6.1.4.1.36.2.18.17.1.8.1.5 |
adpResyncVCIThe VCI used to send credit resynchronization
requests and response cells.ro INTEGER .1.3.6.1.4.1.36.2.18.17.1.8.1.6 |
adpReceiveBuffersThe amount of buffering available on this port
in cells.ro INTEGER .1.3.6.1.4.1.36.2.18.17.1.8.1.7 |
adpPVCMinThe lowest VCI value which can be assigned for
PVCs.ro INTEGER .1.3.6.1.4.1.36.2.18.17.1.8.1.8 |
adpPVCMaxThe highest VCI value which can be assigned for
PVCs.ro INTEGER .1.3.6.1.4.1.36.2.18.17.1.8.1.9 |
adpSVCMinThe lowest VCI value which can be assigned for
SVCs.ro INTEGER .1.3.6.1.4.1.36.2.18.17.1.8.1.10 |
adpSVCMaxThe highest VCI value which can be assigned for
SVCs.ro INTEGER .1.3.6.1.4.1.36.2.18.17.1.8.1.11 |
adpRVCMinThe lowest VCI value which can be assigned for
RVCs.ro INTEGER .1.3.6.1.4.1.36.2.18.17.1.8.1.12 |
adpRVCMaxThe highest VCI value which can be assigned for
RVCs.ro INTEGER .1.3.6.1.4.1.36.2.18.17.1.8.1.13 |
adpBroadcastVCIThe VCI used for broadcast on this port. The
value of 2 will be used to be UNI compliant.ro INTEGER .1.3.6.1.4.1.36.2.18.17.1.8.1.14 |
adpArpVCIThe VCI used to resolve addresses (ARP broadcasts).
adpArpVCI will have a value of 2 in UNI compliant
implementations.ro INTEGER .1.3.6.1.4.1.36.2.18.17.1.8.1.15 |
adpHomeVCIThe Home VCI .ro INTEGER .1.3.6.1.4.1.36.2.18.17.1.8.1.16 |
adpMaxReceiveBufferCounterAlthough the transmitter can allocate the adpReciveBuffers
however it wants to VCs, it will not allocate more than
adpMaxReciveBufferCounter to any individual VCro INTEGER .1.3.6.1.4.1.36.2.18.17.1.8.1.17 |
adpUsedReceiveBuffersThe current number of of free buffers for the linkro INTEGER .1.3.6.1.4.1.36.2.18.17.1.8.1.18 |
adpRemoteFlowMasterIndicates if FLOWmaster flow control is
supported on this device.ro Enumeration .1.3.6.1.4.1.36.2.18.17.1.8.1.19 |
adpOutputBandwidthTotal CBR output bandwidth in cells per secondro INTEGER .1.3.6.1.4.1.36.2.18.17.1.8.1.20 |
adpAvailableOutputBandwidthAvailable CBR output bandwidth in cells per secondro INTEGER .1.3.6.1.4.1.36.2.18.17.1.8.1.21 |
dxatm OBJECT IDENTIFIER .1.3.6.1.4.1.36.2.18.17.2 |
dxatmPvcTableThe point-to-point ATM PVC Cross Connect table.
A bi-directional PVC cross-connect which
cross-connects two end points (i.e., VCLs)
is modeled as one entry in this table. SEQUENCE OF DxatmPvcEntry .1.3.6.1.4.1.36.2.18.17.2.1 |
dxatmPvcEntrysimilar to atm mib description DxatmPvcEntry .1.3.6.1.4.1.36.2.18.17.2.1.1 |
dxatmPvcLowIfIndexThe value of this object is equal to MIB II's
ifIndex value of the ATM interface port for this
cross-connect. The term low implies
that this ATM interface has the numerically lower
ifIndex value than the other ATM interface
identified in the same dxatmPvcEntry. INTEGER -- IfIndex .1.3.6.1.4.1.36.2.18.17.2.1.1.1 |
dxatmPvcLowVpiThe value of this object is equal to the VPI
value at the ATM interface
associated with the cross-connect that is
identified by dxatmPvcLowIfIndex.
The VPI value cannot exceed the number
supported by the atmInterfaceMaxVpiBits
at the low ATM interface port. INTEGER .1.3.6.1.4.1.36.2.18.17.2.1.1.2 |
dxatmPvcLowVciThe value of this object is equal to the VCI
value at the ATM interface
associated with the cross-connect that is
identified by dxatmPvcLowIfIndex.
The VPI value cannot exceed the number
supported by the atmInterfaceMaxVciBits
at the low ATM interface port. INTEGER .1.3.6.1.4.1.36.2.18.17.2.1.1.3 |
dxatmPvcHighIfIndexThe value of this object is equal to MIB II's
ifIndex value of the ATM interface port for
this cross-connect. The term high
implies that this ATM interface has the
numerically higher ifIndex value than the
other ATM interface identified in the same
dxatmPvcEntry. INTEGER -- IfIndex .1.3.6.1.4.1.36.2.18.17.2.1.1.4 |
dxatmPvcHighVpiThe value of this object is equal to the VPI
value at the ATM interface associated with
the cross-connect that is identified
by dxatmPvcHighIfIndex.
The VPI value cannot exceed the number
supported by the atmInterfaceMaxVpiBits
at the high ATM interface port. INTEGER .1.3.6.1.4.1.36.2.18.17.2.1.1.5 |
dxatmPvcHighVciThe value of this object is equal to the VCI
value at the ATM interface associated with
the cross-connect that is identified
by dxatmPvcHighIfIndex.
The VPI value cannot exceed the number
supported by the atmInterfaceMaxVciBits
at the high ATM interface port. INTEGER .1.3.6.1.4.1.36.2.18.17.2.1.1.6 |
dxatmPvcAdminStatusThe value of this object identifies the desired
administrative status of this bi-directional
cross-connect. The up and down states
indicate that the traffic flow is enabled
and disabled respectively on this VP
cross-connect.rw Enumeration .1.3.6.1.4.1.36.2.18.17.2.1.1.7 |
dxatmPvcL2HOperStatusThe value of this object identifies the current
operational status of the cross-connect
in one direction; (i.e., from the low to
high direction). The up and down states indicate
that this cross-connect from low
to high direction is operational or not
operational respectively.
The unknown state indicates that
the state of it cannot be determined.ro Enumeration .1.3.6.1.4.1.36.2.18.17.2.1.1.8 |
dxatmPvcH2LOperStatusThe value of this object identifies the current
operational status of the cross-connect
in one direction; (i.e., from the high to
low direction). The up and down states indicate
that this cross-connect from high
to low direction is operational or not
operational respectively. The
unknown state indicates that the state
of it cannot be determined.ro Enumeration .1.3.6.1.4.1.36.2.18.17.2.1.1.9 |
dxatmPvcL2HFCStatusThe value of this object identifies the current
status of the flow control mecahnism across
cross-connect in one direction; (i.e., from the low to
high direction). The enabled and disabled states indicate
that this flow control from low to high direction is operational
or not operational respectively. The notApplicable state
indicates that traffic in this direction is not subject to
flow control.ro Enumeration .1.3.6.1.4.1.36.2.18.17.2.1.1.10 |
dxatmPvcH2LFCStatusThe value of this object identifies the current
status of the flow control mecahnism across
cross-connect in one direction; (i.e., from the high to
low direction). The enabled and disabled states indicate
that this flow control from high to low direction is operational
or not operational respectively. The notApplicable state
indicates that traffic in this direction is not subject to
flow control.ro Enumeration .1.3.6.1.4.1.36.2.18.17.2.1.1.11 |
dxatmPvcL2HTrafficDescriptorTypeThe type of traffic management, aplicable to the
L2H direction of this PVC. The type may indicate
none, or a type with one or more parameters. These
parameters are specified as a parameter vector, in
the corresponding instances of the objects:
dxatmPvcL2HTrafficDescriptorParam1,
dxatmPvcL2HTrafficDescriptorParam2,
dxatmPvcL2HTrafficDescriptorParam3,
dxatmPvcL2HTrafficDescriptorParam4, and
dxatmPvcL2HTrafficDescriptorParam5.rw OBJECT IDENTIFIER .1.3.6.1.4.1.36.2.18.17.2.1.1.12 |
dxatmPvcL2HTrafficDescriptorParam1The first parameter of the L2H parameter vector
for this PVC, used according to the value of
dxatmPvcL2HTrafficDescriptorType.rw INTEGER .1.3.6.1.4.1.36.2.18.17.2.1.1.13 |
dxatmPvcL2HTrafficDescriptorParam2The second parameter of the L2H parameter vector
for this PVC, used according to the value of
dxatmPvcL2HTrafficDescriptorType.rw INTEGER .1.3.6.1.4.1.36.2.18.17.2.1.1.14 |
dxatmPvcL2HTrafficDescriptorParam3The third parameter of the L2H parameter vector
for this PVC, used according to the value of
dxatmPvcL2HTrafficDescriptorType.rw INTEGER .1.3.6.1.4.1.36.2.18.17.2.1.1.15 |
dxatmPvcL2HTrafficDescriptorParam4The fourth parameter of the L2H parameter vector
for this PVC, used according to the value of
dxatmPvcL2HTrafficDescriptorType.rw INTEGER .1.3.6.1.4.1.36.2.18.17.2.1.1.16 |
dxatmPvcL2HTrafficDescriptorParam5The fifth parameter of the L2H parameter vector
for this PVC, used according to the value of
dxatmPvcL2HTrafficDescriptorType.rw INTEGER .1.3.6.1.4.1.36.2.18.17.2.1.1.17 |
dxatmPvcH2LTrafficDescriptorTypeThe type of traffic management, aplicable to the
H2L direction of this PVC. The type may indicate
none, or a type with one or more parameters. These
parameters are specified as a parameter vector, in
the corresponding instances of the objects:
dxatmPvcH2LTrafficDescriptorParam1,
dxatmPvcH2LTrafficDescriptorParam2,
dxatmPvcH2LTrafficDescriptorParam3,
dxatmPvcH2LTrafficDescriptorParam4, and
dxatmPvcH2LTrafficDescriptorParam5.rw OBJECT IDENTIFIER .1.3.6.1.4.1.36.2.18.17.2.1.1.18 |
dxatmPvcH2LTrafficDescriptorParam1The first parameter of the H2L parameter vector
for this PVC, used according to the value of
dxatmPvcH2LTrafficDescriptorType.rw INTEGER .1.3.6.1.4.1.36.2.18.17.2.1.1.19 |
dxatmPvcH2LTrafficDescriptorParam2The second parameter of the H2L parameter vector
for this PVC, used according to the value of
dxatmPvcH2LTrafficDescriptorType.rw INTEGER .1.3.6.1.4.1.36.2.18.17.2.1.1.20 |
dxatmPvcH2LTrafficDescriptorParam3The third parameter of the H2L parameter vector
for this PVC, used according to the value of
dxatmPvcH2LTrafficDescriptorType.rw INTEGER .1.3.6.1.4.1.36.2.18.17.2.1.1.21 |
dxatmPvcH2LTrafficDescriptorParam4The fourth parameter of the H2L parameter vector
for this PVC, used according to the value of
dxatmPvcH2LTrafficDescriptorType.rw INTEGER .1.3.6.1.4.1.36.2.18.17.2.1.1.22 |
dxatmPvcH2LTrafficDescriptorParam5The fifth parameter of the H2L parameter vector
for this PVC, used according to the value of
dxatmPvcH2LTrafficDescriptorType.rw INTEGER .1.3.6.1.4.1.36.2.18.17.2.1.1.23 |
dxatmPvcL2HQoSClassThe QoS Class, as defined in section 4 of Apendix A,
for the L2H direction of this PVC connection at
the local UNI.rw INTEGER .1.3.6.1.4.1.36.2.18.17.2.1.1.24 |
dxatmPvcH2LQoSClassThe QoS Class, as defined in section 4 of Apendix A,
for the H2L direction of this PVC connection at
the local UNI.rw INTEGER .1.3.6.1.4.1.36.2.18.17.2.1.1.25 |
dxatmPvcRowStatusThis object is used to create
a new row or modify or delete an
existing row in this table.rw INTEGER -- really RowStatus .1.3.6.1.4.1.36.2.18.17.2.1.1.26 |
dxatmPvcMpTableThe ATM Multipoint PVC Cross Connect table.
A point-to-multipoint PVC cross-connect
is modeled as a set of entries in this table
having a common root and multiple leaves. SEQUENCE OF DxatmPvcMpEntry .1.3.6.1.4.1.36.2.18.17.2.2 |
dxatmPvcMpEntrysimilar to atm mib description DxatmPvcMpEntry .1.3.6.1.4.1.36.2.18.17.2.2.1 |
dxatmPvcMpRootIfIndexThe value of this object is equal to MIB II's
ifIndex value of the ATM interface port for the
root end of the multipoint cross-connect. INTEGER -- IfIndex .1.3.6.1.4.1.36.2.18.17.2.2.1.1 |
dxatmPvcMpRootVpiThe value of this object is equal to the VPI
value at the ATM interface
associated with the cross-connect that is
identified by dxatmPvcMpRootIfIndex.
The VPI value cannot exceed the number
supported by the atmInterfaceMaxVpiBits
at the Root ATM interface port. INTEGER .1.3.6.1.4.1.36.2.18.17.2.2.1.2 |
dxatmPvcMpRootVciThe value of this object is equal to the VCI
value at the ATM interface
associated with the cross-connect that is
identified by dxatmPvcMpRootIfIndex.
The VCI value cannot exceed the number
supported by the atmInterfaceMaxVciBits
at the Root ATM interface port. INTEGER .1.3.6.1.4.1.36.2.18.17.2.2.1.3 |
dxatmPvcMpLeafIfIndexThe value of this object is equal to MIB II's
ifIndex value of the ATM interface port for
the leaf end of the multipoint cross-connect. INTEGER -- IfIndex .1.3.6.1.4.1.36.2.18.17.2.2.1.4 |
dxatmPvcMpLeafVpiThe value of this object is equal to the VPI
value at the ATM interface associated with
the cross-connect that is identified
by dxatmPvcMpLeafIfIndex.
The VPI value cannot exceed the number
supported by the atmInterfaceMaxVpiBits
at the Leaf ATM interface port. INTEGER .1.3.6.1.4.1.36.2.18.17.2.2.1.5 |
dxatmPvcMpLeafVciThe value of this object is equal to the VCI
value at the ATM interface associated with
the cross-connect that is identified
by dxatmPvcMpLeafIfIndex.
The VPI value cannot exceed the number
supported by the atmInterfaceMaxVciBits
at the Leaf ATM interface port. INTEGER .1.3.6.1.4.1.36.2.18.17.2.2.1.6 |
dxatmPvcMpAdminStatusThe value of this object identifies the desired
administrative status of this point-to-multipoint
cross-connect branch. The up and down states
indicate that the traffic is enabled
and disabled respectively on this branch of the
cross-connect.rw Enumeration .1.3.6.1.4.1.36.2.18.17.2.2.1.7 |
dxatmPvcMpOperStatusThe value of this object identifies the current
operational status of this branch of the point-to-
multipoint cross-connect. The up and down states indicate
that this branch of cross-connect is operational or not
operational respectively.
The unknown state indicates that
the state of it cannot be determined.ro Enumeration .1.3.6.1.4.1.36.2.18.17.2.2.1.8 |
dxatmPvcMpFCStatusThe value of this object identifies the current
status of the flow control mecahnism across
PM. The enabled and disabled states indicate
that this flow control is operational
or not operational respectively. The notApplicable state
indicates that traffic is not subject to
flow control.ro Enumeration .1.3.6.1.4.1.36.2.18.17.2.2.1.9 |
dxatmPvcMpTrafficDescriptorTypeThe type of traffic management, aplicable to the
transmit from Root to Leaf. The type may indicate
none, or a type with one or more parameters. These
parameters are specified as a parameter vector, in
the corresponding instances of the objects:
dxatmPvcMpTrafficDescriptorParam1,
dxatmPvcMpTrafficDescriptorParam2,
dxatmPvcMpTrafficDescriptorParam3,
dxatmPvcMpTrafficDescriptorParam4, and
dxatmPvcMpTrafficDescriptorParam5.rw OBJECT IDENTIFIER .1.3.6.1.4.1.36.2.18.17.2.2.1.10 |
dxatmPvcMpTrafficDescriptorParam1The first parameter of the parameter vector
for this PvcMp, used according to the value of
dxatmPvcMpTrafficDescriptorType.rw INTEGER .1.3.6.1.4.1.36.2.18.17.2.2.1.11 |
dxatmPvcMpTrafficDescriptorParam2The second parameter of the parameter vector
for this PvcMp, used according to the value of
dxatmPvcMpTrafficDescriptorType.rw INTEGER .1.3.6.1.4.1.36.2.18.17.2.2.1.12 |
dxatmPvcMpTrafficDescriptorParam3The third parameter of the parameter vector
for this PvcMp, used according to the value of
dxatmPvcMpTrafficDescriptorType.rw INTEGER .1.3.6.1.4.1.36.2.18.17.2.2.1.13 |
dxatmPvcMpTrafficDescriptorParam4The fifth parameter of the parameter vector
for this PvcMp, used according to the value of
dxatmPvcMpTrafficDescriptorType.rw INTEGER .1.3.6.1.4.1.36.2.18.17.2.2.1.14 |
dxatmPvcMpTrafficDescriptorParam5The fifth parameter of the parameter vector
for this PvcMp, used according to the value of
dxatmPvcMpXmtTrafficDescriptorType.rw INTEGER .1.3.6.1.4.1.36.2.18.17.2.2.1.15 |
dxatmPvcMpQoSClassThe QoS Class, as defined in section 4 of Apendix A,
of this PvcMp connection at
the local UNI.rw INTEGER .1.3.6.1.4.1.36.2.18.17.2.2.1.16 |
dxatmPvcMpRowStatusThis object is used to create
a new row or modify or delete an
existing row in this table.rw INTEGER -- really RowStatus .1.3.6.1.4.1.36.2.18.17.2.2.1.17 |
dxatmVirtualPathObjects OBJECT IDENTIFIER .1.3.6.1.4.1.36.2.18.17.2.3 |
dxatmVpModeTableA table describing the desired and actual virtual path
mode of each line card. SEQUENCE OF DxatmVpModeEntry .1.3.6.1.4.1.36.2.18.17.2.3.1 |
dxatmVpModeEntryEach entry describes one line card. DxatmVpModeEntry .1.3.6.1.4.1.36.2.18.17.2.3.1.1 |
dxatmVpModeSlotThe front-panel slot number for the line card whose virtual
path mode is to be examined or modified.ro INTEGER .1.3.6.1.4.1.36.2.18.17.2.3.1.1.1 |
dxatmVpModeDesiredThe desired virtual path mode for the line card in this slot.
On a Version 2.0 line card,
on (1) lets you use virtual path terminations -
but restricts you to the use of one port.
off(2) lets you use all four mod-PHY ports - but
only with VPI zero.
Line cards which can't support VPs or which can support them
without such tradeoffs will ignore this setting.rw Enumeration .1.3.6.1.4.1.36.2.18.17.2.3.1.1.2 |
dxatmVpModeActualThe actual virtual path mode for this slot.ro Enumeration .1.3.6.1.4.1.36.2.18.17.2.3.1.1.3 |
dxatmVpTermTableThe ATM permanent virtual path termination table. SEQUENCE OF DxatmVpTermEntry .1.3.6.1.4.1.36.2.18.17.2.3.2 |
dxatmVpTermEntryEach entry describes one virtual path termination. DxatmVpTermEntry .1.3.6.1.4.1.36.2.18.17.2.3.2.1 |
dxatmVpTermIfIndexThe value of the MIB II ifIndex object for the 'atm' port on
which the virtual path is located.ro INTEGER -- IfIndex .1.3.6.1.4.1.36.2.18.17.2.3.2.1.1 |
dxatmVpTermVpiThe virtual path index.ro INTEGER .1.3.6.1.4.1.36.2.18.17.2.3.2.1.2 |
dxatmVpTermAdminStatusThe desired state of this virtual path termination. The up
and down states indicate respectively that the traffic flow
is enabled and disabled.rw Enumeration .1.3.6.1.4.1.36.2.18.17.2.3.2.1.3 |
dxatmVpTermOperStatusThe current operational state of the virtual path connection.
The up and down states indicate respectively that this VP is
operational or not operational. The unknown state indicates
that the state of it cannot be determined.ro Enumeration .1.3.6.1.4.1.36.2.18.17.2.3.2.1.4 |
dxatmVpTermPcrThe peak cell rate for the virtual path, in cells per
second. If this is set to 0 (or left unset) when the
VP is created, the peak cell rate will default to the
link bandwidth.rw INTEGER .1.3.6.1.4.1.36.2.18.17.2.3.2.1.5 |
dxatmVpTermScrThe sustained cell rate for the virtual path, in cells
per second.rw INTEGER .1.3.6.1.4.1.36.2.18.17.2.3.2.1.6 |
dxatmVpTermMbsThe maximum burst size.rw INTEGER .1.3.6.1.4.1.36.2.18.17.2.3.2.1.7 |
dxatmVpTermRowStatusThis object is used to create a new row, or modify or
delete an existing row in this table.rw INTEGER -- really RowStatus .1.3.6.1.4.1.36.2.18.17.2.3.2.1.8 |