DC-OPT-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
54
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
54 total| Object Name |
|---|
codex OBJECT IDENTIFIER .1.3.6.1.4.1.449 |
RFC1155-SMI Unknown .1.3.6.1.4.1.449 |
cdxProductSpecific OBJECT IDENTIFIER .1.3.6.1.4.1.449.2 |
cdx6500 OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1 |
cdx6500Statistics OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3 |
cdx6500StatOtherStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.2 |
cdx6500DCStatTable OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.2.10 |
cdx6500DCGenStatTable OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.2.10.1 |
cdx6500DCGenStatTableEntry OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.2.10.1.1 |
cdx6500DCGenStatDSPStatusThis parameter specifies the current status/existence of
the DC SIMM/DSP on the motherboard.
up - DC SIMM/DSP is installed and operational.
down - DC SIMM/DSP is non-functional.
missing - DC SIMM/DSP is missing.ro Enumeration .1.3.6.1.4.1.449.2.1.3.2.10.1.1.1 |
cdx6500DCGenStatHndlrSWRevThis parameter displays the DC Handler Software
Revision Number.ro INTEGER .1.3.6.1.4.1.449.2.1.3.2.10.1.1.2 |
cdx6500DCGenStatFnctnSWRevDC Function Revision number. For example, revision number
of DSP firmware.ro INTEGER .1.3.6.1.4.1.449.2.1.3.2.10.1.1.3 |
cdx6500DCGenStatMaxChannelsNumber of DC Channels supported.ro INTEGER .1.3.6.1.4.1.449.2.1.3.2.10.1.1.4 |
cdx6500DCGenStatChanInUseNumber of DC Channels in use.ro INTEGER .1.3.6.1.4.1.449.2.1.3.2.10.1.1.5 |
cdx6500DCGenStatMaxSmltChanUseMaximum number of DC Channels in use simultaneously since
the last stats reset.ro INTEGER .1.3.6.1.4.1.449.2.1.3.2.10.1.1.6 |
cdx6500DCGenStatRejectConnNumber of call requests rejected due to the unavailability
of DC channels.ro INTEGER .1.3.6.1.4.1.449.2.1.3.2.10.1.1.7 |
cdx6500DCGenStatAggCRatioRatio of total number of incoming charactersfor all DC
channels to total number of outgoing characters for all
channels, for the past minute.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.2.10.1.1.8 |
cdx6500DCGenStatCurrEncQDepthCurrent number of frames in the encoder queue, waiting to
be compressed.ro INTEGER .1.3.6.1.4.1.449.2.1.3.2.10.1.1.9 |
cdx6500DCGenStatMaxEncQDepthMaximum number of frames that were on the encoder queue
since the last stats reset.ro INTEGER .1.3.6.1.4.1.449.2.1.3.2.10.1.1.10 |
cdx6500DCGenStatTmOfMaxEncQDepthTime when the maximum Encoder Queue Depth is reached.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.2.10.1.1.11 |
cdx6500DCGenStatCurrDecQDepthCurrent number of frames in the decoder queue, waiting to be
decompressed.ro INTEGER .1.3.6.1.4.1.449.2.1.3.2.10.1.1.12 |
cdx6500DCGenStatMaxDecQDepthMaximum number of frames that were on the decoder queue
waiting to be decompressed.ro INTEGER .1.3.6.1.4.1.449.2.1.3.2.10.1.1.13 |
cdx6500DCGenStatTmOfMaxDecQDepthTime when the maximum Decoder Queue Depth is reached.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.2.10.1.1.14 |
cdx6500DCChanStatTableThe Data Compression Channel Statistics Table. SEQUENCE OF Cdx6500DCChanStatTableEntry .1.3.6.1.4.1.449.2.1.3.2.10.2 |
cdx6500DCChanStatTableEntryEach entry in this table pertains to the Data Compression
Channel statistics. Cdx6500DCChanStatTableEntry .1.3.6.1.4.1.449.2.1.3.2.10.2.1 |
cdx6500DCChanStatChanNumChannel number whose statistics were requested.ro INTEGER .1.3.6.1.4.1.449.2.1.3.2.10.2.1.1 |
cdx6500DCChanStatTmOfLastStatRstTime when the node restarted or the stats reset by
CTP/SNMP Manager command.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.2.10.2.1.2 |
cdx6500DCChanStatChanStateActivity state of the DC channel.
dspDown - DSP is down.
idle - DSP is ready to be assigned to a connection.
negotiating - Source has accepted the Call Request and is
waiting for a Call Accept from the
destination node.
dataPassing - Normal data passing state.
apClearing - Call Clear request arrived from access side.
npClearing - Call Clear request arrived from network side.
clearingCall - A call collision or a Call Clear along with a
X.25 reset or a `start buffer discarding'.
flushingOnClr - Call has been cleared with FLUSH, waiting
packets to flush from DC Handler rings.
flushingData - Waiting for x25 confirm.
flushingDCRing - Waiting for the data on the DC Handler ring
to be flushed after a x.25 confirm or stop
discard.
clearing - Call has been cleared.ro Enumeration .1.3.6.1.4.1.449.2.1.3.2.10.2.1.3 |
cdx6500DCChanStatSourceChanAccess Protocol's identity string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.2.10.2.1.4 |
cdx6500DCChanStatDestChanNetwork Protocol's identity string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.2.10.2.1.5 |
cdx6500DCChanStatXmitCRatioActual compression ratio for outgoing data.
This is a 60 second snapshot. Range is 1 - 9.2ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.2.10.2.1.6 |
cdx6500DCChanStatNumOfEncFramesNumber of frames received from the Access Protocol to
be compressed.ro Counter .1.3.6.1.4.1.449.2.1.3.2.10.2.1.7 |
cdx6500DCChanStatNumOfCharInToEncNumber of bytes pushed into the encoder to be compressed.ro Counter .1.3.6.1.4.1.449.2.1.3.2.10.2.1.8 |
cdx6500DCChanStatNumOfCharOutOfEncNumber of compressed bytes produced by the encoder.ro Counter .1.3.6.1.4.1.449.2.1.3.2.10.2.1.9 |
cdx6500DCChanStatNumOfDecFramesNumber of frames received from the Network Protocol to
be decompressed.ro Counter .1.3.6.1.4.1.449.2.1.3.2.10.2.1.10 |
cdx6500DCChanStatNumOfCharInToDecNumber of bytes pushed into the decoder to be decompressed.ro Counter .1.3.6.1.4.1.449.2.1.3.2.10.2.1.11 |
cdx6500DCChanStatNumOfCharOutOfDecNumber of decompressed bytes produced by the decoder.ro Counter .1.3.6.1.4.1.449.2.1.3.2.10.2.1.12 |
cdx6500DCChanStatEncAETrnstnCntNumber of times the encoder switched from compressed
mode to anti-expansion mode.ro Counter .1.3.6.1.4.1.449.2.1.3.2.10.2.1.13 |
cdx6500DCChanStatEncAEFrameCntNumber of anti-expansion frames sent by the encoder.ro Counter .1.3.6.1.4.1.449.2.1.3.2.10.2.1.14 |
cdx6500DCChanStatEncAEModeStatusAnti Expansion mode Status for Encoder :
on - Data Compression is in the anti
expansion mode.
off - Data Compression is out of the anti
expansion mode.ro Enumeration .1.3.6.1.4.1.449.2.1.3.2.10.2.1.15 |
cdx6500DCChanStatDecAETrnstnCntNumber of times the decoder switched from compressed mode
to anti-expansion mode.ro Counter .1.3.6.1.4.1.449.2.1.3.2.10.2.1.16 |
cdx6500DCChanStatDecAEFrameCntNumber of anti-expansion frames received by the decoder.ro Counter .1.3.6.1.4.1.449.2.1.3.2.10.2.1.17 |
cdx6500DCChanStatDecAEModeStatusAnti Expansion mode Status for Decoder :
on - Data Compression is in the anti
expansion mode.
off - Data Compression is out of the anti
expansion mode.ro Enumeration .1.3.6.1.4.1.449.2.1.3.2.10.2.1.18 |
cdx6500DCChanStatDSWithBadFramesNumber of decoded frames detected by the decoder to have
been corrupted. This includes frames with bad headers.ro Counter .1.3.6.1.4.1.449.2.1.3.2.10.2.1.19 |
cdx6500DCChanStatDSWithBadHeadersNumber of decoded frames detected by the decoder to have
a bad header.ro Counter .1.3.6.1.4.1.449.2.1.3.2.10.2.1.20 |
cdx6500DCChanStatDSDueToRstOrCngNumber of packets discarded while processing a X.25
reset or during node congestion.ro Counter .1.3.6.1.4.1.449.2.1.3.2.10.2.1.21 |
cdx6500Controls OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.4 |
cdx6500ContDC OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.4.9 |
cdx6500ContResetAllDCStatsReset the DC Statistics for all channels.rw Enumeration .1.3.6.1.4.1.449.2.1.4.9.1 |
cdx6500ContDCTableThese resets require the channel number as the index. SEQUENCE OF Cdx6500ContDCTableEntry .1.3.6.1.4.1.449.2.1.4.9.2 |
cdx6500ContDCTableEntryEach entry represents a control parameter used to reset
Channel Statistics or Channel Vocabulary. Cdx6500ContDCTableEntry .1.3.6.1.4.1.449.2.1.4.9.2.1 |
cdx6500ContDCChanNumChannel number used as the index.ro INTEGER .1.3.6.1.4.1.449.2.1.4.9.2.1.1 |
cdx6500ContResetDCChanStatsReset the DC Statistics for this channel.rw Enumeration .1.3.6.1.4.1.449.2.1.4.9.2.1.2 |
cdx6500ContResetDCChanVocabReset the vocabulary/history buffer for this channel if
this channel number is active.rw Enumeration .1.3.6.1.4.1.449.2.1.4.9.2.1.3 |