DASAN-ADSL-MIB
AI MIB Summary
The DASAN-ADSL-MIB extends the standard ADSL-LINE-MIB to monitor and configure proprietary ADSL line parameters, physical layer attributes, channel performance data, and alarm profiles on DASAN network access devices. It provides granular visibility into ATUC and ATUR physical and channel tables, performance intervals, and configuration profiles via the dsAdslCapabilityGroup scalars.
The MIB module to describe ADSL product. The MIB module that provides objects that are proprietary and extension to ADSL- LINE-MIB. The MIB include extension to following Tables.
1.) adslLineTable
2.) adslAtucPhysTable
3.) adslAturPhysTable
4.) adslAtucChanTable
5.) adslAturChanTable
6.) adslAtucPerfDataTable
8.) adslAtucIntervalTable
10.) adslAtucChanPerfDataTable
11.) adslAturChanPerfDataTable
12.) adslAtucChanIntervalTable
13.) adslAturChanIntervalTable
14.) adslLineConfProfileTable
15.) adslLineAlarmConfProfileTable
The MIB also include a set of scalar(s) clubbed under the group 'dsAdslCapabilityGroup'.
Main OID:
dasanAdslMIB.1.3.6.1.4.1.6296.9.5
245
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
245 total| Object Name |
|---|
dasanAdslMIBThe MIB module to describe ADSL product.
The MIB module that provides objects that are proprietary and extension to ADSL-
LINE-MIB. The MIB include extension to following Tables.
1.) adslLineTable
2.) adslAtucPhysTable
3.) adslAturPhysTable
4.) adslAtucChanTable
5.) adslAturChanTable
6.) adslAtucPerfDataTable
8.) adslAtucIntervalTable
10.) adslAtucChanPerfDataTable
11.) adslAturChanPerfDataTable
12.) adslAtucChanIntervalTable
13.) adslAturChanIntervalTable
14.) adslLineConfProfileTable
15.) adslLineAlarmConfProfileTable
The MIB also include a set of scalar(s) clubbed under the group 'dsAdslCapabilityGroup'. MODULE-IDENTITY .1.3.6.1.4.1.6296.9.5 |
dasanAdslLineMIB OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.5.1 |
dasanAdslMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.5.1.1 |
dsDslSystemParamGroup OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.5.1.1.1 |
dsDslSystemDslTypeThis object identifies the firmware to be downloaded.rw Enumeration .1.3.6.1.4.1.6296.9.5.1.1.1.1 |
dsDslSystemLineCodingTypeThis object indicates ADSL line code type.rw Enumeration .1.3.6.1.4.1.6296.9.5.1.1.1.2 |
dsDslSystemLineTxCfgThis object indicates transmission capabilities with which the DSL system is configured.rw Bits .1.3.6.1.4.1.6296.9.5.1.1.1.3 |
dsAdslCapabilityGroup OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.5.1.1.2 |
dsAdslCapabilityLineTxCapThis bitmap specifies which all transmission modes, which the ATU-C is capable of supporting. Right now support for Annex A (q9921PotsNonOverlapped(2) and q9921PotsOverlapped(3)) is present. This value depends on the DSL PHY firmware present on Columbia MNDro Bits .1.3.6.1.4.1.6296.9.5.1.1.2.1 |
dsAdslLineExtnTableThis table includes common attributes describing both ends of the line. It is required for all ADSL physical interfaces. This Table is an extension to adslLineTable defined in rfc-2662. SEQUENCE OF DsAdslLineExtnEntry .1.3.6.1.4.1.6296.9.5.1.1.3 |
dsAdslLineExtnEntryAn entry (conceptual row) in the dsAdslLineExtnTable.
The Table is indexed by ifIndex. DsAdslLineExtnEntry .1.3.6.1.4.1.6296.9.5.1.1.3.1 |
dsAdslLineExtnActionthis object indicates parameter that allows actions on a per line basis. These actions include abort, startup, and tests.rw Enumeration .1.3.6.1.4.1.6296.9.5.1.1.3.1.1 |
dsAdslLineExtnUtopiaL2RxAddrThis object indicates UTOPIA Level 2 Rx address for a line.ro INTEGER ( 1..254 ) .1.3.6.1.4.1.6296.9.5.1.1.3.1.2 |
dsAdslLineExtnUtopiaL2TxAddrThis object indicates UTOPIA Level 2 Tx address for a line.ro INTEGER ( 1..254 ) .1.3.6.1.4.1.6296.9.5.1.1.3.1.3 |
dsAdslLineExtnTransAtucCapThe transmission modes that the ATU-C is capable of supporting. The modes available are limited by the design of the equipment. REFERENCE Section 7.3.2 ITU G.997.1.ro Bits .1.3.6.1.4.1.6296.9.5.1.1.3.1.4 |
dsAdslLineExtnTransAtucActualThe transmission mode of the ATU-C. This object returns if there is no mode currently known. The initialization with the ATU-R will determine the mode used. REFERENCE Section 7.3.2 ITU G.997.1.ro Bits .1.3.6.1.4.1.6296.9.5.1.1.3.1.5 |
dsAdslLineExtnClockTypeThis object indicates parameter to set use of either crystal or oscillator.ro Enumeration .1.3.6.1.4.1.6296.9.5.1.1.3.1.6 |
dsAdslLineExtnLineDmtTrellisParameter that indicates whether trellis coding has been enabled or disabled. Trellis coding should always be enabled for its clear performance advantage.ro Enumeration .1.3.6.1.4.1.6296.9.5.1.1.3.1.7 |
dsAdslAtucPhysExtnTableThis table provides one row for each ATUC. This table is an extention to adslAtucPhysTable defined in rfc-2662. SEQUENCE OF DsAdslAtucPhysExtnEntry .1.3.6.1.4.1.6296.9.5.1.1.4 |
dsAdslAtucPhysExtnEntryAn entry (conceptual row) in the dsAdslAtucPhysExtnTable.
The Table is indexed by ifIndex. DsAdslAtucPhysExtnEntry .1.3.6.1.4.1.6296.9.5.1.1.4.1 |
dsAdslAtucPhysExtnOpStateThis object indicates the operational state of the ATU. Values include idle,handshake, training, etc.ro Enumeration .1.3.6.1.4.1.6296.9.5.1.1.4.1.1 |
dsAdslAtucPhysExtnActualStdThis object provides actual ATU-C configuration based on outcome of negotiation with ATU-R. In this case, the parameter provides actual standard used for the connection.ro Enumeration .1.3.6.1.4.1.6296.9.5.1.1.4.1.2 |
dsAdslAtucPhysExtnBertErrorThis object indicates the No. of bit errors detected during BERT.ro INTEGER .1.3.6.1.4.1.6296.9.5.1.1.4.1.3 |
dsAdslAtucPhysExtnTxAtmCellCounterThis object Provides transmit ATM cell counter.ro Counter32 .1.3.6.1.4.1.6296.9.5.1.1.4.1.4 |
dsAdslAtucPhysExtnRxAtmCellCounterThis object Provides receive ATM cell counter.ro INTEGER .1.3.6.1.4.1.6296.9.5.1.1.4.1.5 |
dsAdslAtucPhysExtnStartProgressThis object provides current detailed start up information to be used for debugging.ro INTEGER .1.3.6.1.4.1.6296.9.5.1.1.4.1.6 |
dsAdslAtucPhysExtnIdleBertErrorNumber of bit errors.ro INTEGER .1.3.6.1.4.1.6296.9.5.1.1.4.1.7 |
dsAdslAtucPhysExtnIdleBertCellsNumber of idle cells.ro INTEGER .1.3.6.1.4.1.6296.9.5.1.1.4.1.8 |
dsAdslAtucPhysExtnBertSyncIndicates if the Signal is in Sync or not.ro Enumeration .1.3.6.1.4.1.6296.9.5.1.1.4.1.9 |
dsAdslAtucPhysExtnParametricTestResultIndicates the Result of the Parametric Test conducted on the Xcvr.ro Enumeration .1.3.6.1.4.1.6296.9.5.1.1.4.1.10 |
dsAdslAtucPhysExtnDataBoostStatusThis object indicates whether DataBoost is utilized for the connection.ro Enumeration .1.3.6.1.4.1.6296.9.5.1.1.4.1.21 |
dsAdslAtucPhysExtnTestArrayThis object indicates the Parametric Test Array. Every Four octects refer to one element in this array of octets.ro OCTET STRING (SIZE ( 0..42 ) ) .1.3.6.1.4.1.6296.9.5.1.1.4.1.22 |
dsAdslAtucPhysExtnChanPerfCDThe near-end delineated total cell count performance parameter is a count of the total number of cells passed through the cell delineation and HEC function process operating on the ATM Data Path while in the SYNC state. (Not available for ADSL).ro INTEGER .1.3.6.1.4.1.6296.9.5.1.1.4.1.23 |
dsAdslAtucPhysExtnChanPerfBEThe near-end idle bit error count performance parameter is a count of the number of bit errors in the idle cell payload received in the ATM Data Path at the near-end. (Not available for ADSL).ro INTEGER .1.3.6.1.4.1.6296.9.5.1.1.4.1.24 |
dsAdslAtucPhysExtnDeltHLINSCusDELT-related parameter that provides the scale factor to be applied to the upstream Hlin(f) values.(Not available for ADSL and ADSL2plus).ro INTEGER .1.3.6.1.4.1.6296.9.5.1.1.4.1.25 |
dsAdslAtucPhysExtnDeltHLINpsusDELT-related parameter that provides an array of complex upstream Hlin(f) values in linear scale. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets.ro OCTET STRING (SIZE ( 0..42 ) ) .1.3.6.1.4.1.6296.9.5.1.1.4.1.26 |
dsAdslAtucPhysExtnDeltHLOGMTusDELT-related parameter that provides the number of symbols used to measure the upstream Hlog(f).(Not available for ADSL and ADSL2plus).ro INTEGER .1.3.6.1.4.1.6296.9.5.1.1.4.1.27 |
dsAdslAtucPhysExtnDeltHLOGpsusDELT-related parameter that provides an array of real upstream Hlog(f) values in dB. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets.ro OCTET STRING (SIZE ( 0..42 ) ) .1.3.6.1.4.1.6296.9.5.1.1.4.1.28 |
dsAdslAtucPhysExtnDeltQLNMTusDELT-related parameter that provides the number of symbols used to measure the upstream QLN(f) values. (Not available for ADSL and ADSL2plus).ro INTEGER .1.3.6.1.4.1.6296.9.5.1.1.4.1.29 |
dsAdslAtucPhysExtnDeltQLNpsusDELT-related parameter that provides an array of real upstream QLN(f) values in dB. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets.ro OCTET STRING (SIZE ( 0..42 ) ) .1.3.6.1.4.1.6296.9.5.1.1.4.1.30 |
dsAdslAtucPhysExtnDeltLastTxStateDELT-related parameter that provides last successful transmitted initialization state by the ATU-C. (Not available for ADSL and ADSL2plus).ro Enumeration .1.3.6.1.4.1.6296.9.5.1.1.4.1.31 |
dsAdslAtucPhysExtnPMStateLine Power Management State. (Not available for ADSL).ro Enumeration .1.3.6.1.4.1.6296.9.5.1.1.4.1.32 |
dsAdslAtucPhysExtnChanPerfCUThe near-end user total cell count performance parameter is a count of the total number of cells in the ATM Data Path delivered at the V-C (for ATU-C) or T-R (for ATU-R) interface. (Not available for ADSL).ro INTEGER .1.3.6.1.4.1.6296.9.5.1.1.4.1.33 |
dsAdslAtucPhysExtnExtendedPsdStatusGlobespanVirata parameter that indicates whether an extended or the standard upstream PSD is used - for G.Span Plus mode of operation only. Only supported for G.Span Plus, therefore this parameter is not valid for ADSL2/ADSL2plus modes of operation.ro Enumeration .1.3.6.1.4.1.6296.9.5.1.1.4.1.34 |
dsAdslAtucPhysExtnChipVersionGlobespanVirata parameter that indicates the DSP version number.ro INTEGER .1.3.6.1.4.1.6296.9.5.1.1.4.1.35 |
dsAdslAtucPhysExtnPilotToneGlobespanVirata parameter that indicates the Pilot Tone Index.ro INTEGER .1.3.6.1.4.1.6296.9.5.1.1.4.1.36 |
dsAdslAtucMSGdsIndicates the Overhead Channel. This feature is not supported by DSLPHY as yet.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.4.1.37 |
dsAdslAtucPhysExtnPsdMaskModeGlobespanVirata parameter that indicates the actual Psd Mask currently being used.ro Enumeration .1.3.6.1.4.1.6296.9.5.1.1.4.1.38 |
dsAdslAturPhysExtnTableThis table is an extention to adslAtucPhysTable defined in rfc-2662. This table provides one row for each ATUR. Each row contains the Physical Layer Parameters table for that ATUR. SEQUENCE OF DsAdslAturPhysExtnEntry .1.3.6.1.4.1.6296.9.5.1.1.5 |
dsAdslAturPhysExtnEntryAn entry (conceptual row) in the dsAdslAturPhysExtnTable.
The Table is indexed by IfIndex. DsAdslAturPhysExtnEntry .1.3.6.1.4.1.6296.9.5.1.1.5.1 |
dsAdslAturPhysExtnConfigThis object provides the upstream and downstream ATU-R configuration data (EOC - read 5 sec after data mode).ro OCTET STRING (SIZE ( 0..255 ) ) .1.3.6.1.4.1.6296.9.5.1.1.5.1.1 |
dsAdslAturPhysExtnChanPerfCDThe far-end delineated total cell count performance parameter is a count of the total number of cells passed through the cell delineation and HEC function process operating on the ATM Data Path while in the SYNC state.(Not available for ADSL).ro INTEGER .1.3.6.1.4.1.6296.9.5.1.1.5.1.2 |
dsAdslAturPhysExtnChanPerfCUThe far-end user total cell count performance parameter is a count of the total number of cells in the ATM Data Path delivered at the V-C (for ATU-C) or T-R (for ATUR) interface. (Not available for ADSL).ro INTEGER .1.3.6.1.4.1.6296.9.5.1.1.5.1.3 |
dsAdslAturPhysExtnChanPerfBEThe far-end idle bit error count performance parameter is a count of the number of bit errors in the idle cell payload received in the ATM Data Path at the far-end. (Not available for ADSL).ro INTEGER .1.3.6.1.4.1.6296.9.5.1.1.5.1.4 |
dsAdslAturPhysExtnDeltHLINSCdsDELT-related parameter that provides the scale factor to be applied to the downstream Hlin(f) values.(Not available for ADSL and ADSL2plus).ro INTEGER .1.3.6.1.4.1.6296.9.5.1.1.5.1.5 |
dsAdslAturPhysExtnDeltHLINpsdsDELT-related parameter that provides an array of complex downstream Hlin(f) values in linear scale. (Not available for ADSL and ADSL2plus). Every two octects refer to one element in this array of octets.ro OCTET STRING (SIZE ( 0..42 ) ) .1.3.6.1.4.1.6296.9.5.1.1.5.1.6 |
dsAdslAturPhysExtnDeltHLOGMTdsDELT-related parameter that provides the number of symbols used to measure the downstream Hlog(f). (Not available for ADSL and ADSL2plus).ro INTEGER .1.3.6.1.4.1.6296.9.5.1.1.5.1.7 |
dsAdslAturPhysExtnDeltHLOGpsusDELT-related parameter that provides an array of real downstream Hlog(f) values in dB. (Not available for ADSL and ADSL2plus).ro OCTET STRING (SIZE ( 0..42 ) ) .1.3.6.1.4.1.6296.9.5.1.1.5.1.8 |
dsAdslAturPhysExtnDeltQLNMTdsDELT-related parameter that provides the number of symbols used to measure the downstream QLN(f) values. (Not available for ADSL and ADSL2plus).ro INTEGER .1.3.6.1.4.1.6296.9.5.1.1.5.1.9 |
dsAdslAturPhysExtnDeltQLNpsdsDELT-related parameter that provides an array of real downstream QLN(f) values in dB. (Not available for ADSL and ADSL2plus). Every two octects refer to one element in this array of octets.ro OCTET STRING (SIZE ( 0..42 ) ) .1.3.6.1.4.1.6296.9.5.1.1.5.1.10 |
dsAdslAturPhysExtnDeltLastTxStateDELT-related parameter that provides last successful transmitted initialization state by the ATU-R. (Not available for ADSL and ADSL2plus).ro Enumeration .1.3.6.1.4.1.6296.9.5.1.1.5.1.11 |
dsAdslAturMSGusIndicates the Overhead Channel. This feature is not supported by DSLPHY as yet.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.5.1.12 |
dsAdslAtucChanExtnTableThis table provides one row for each ATUC channel. This Table is an extention to adslAtucChanTable defined in rfc 2662. SEQUENCE OF DsAdslAtucChanExtnEntry .1.3.6.1.4.1.6296.9.5.1.1.6 |
dsAdslAtucChanExtnEntryAn entry (conceptual row) in the dsAdslAtucChanExtnTable.
The Table is indexed by ifIndex. DsAdslAtucChanExtnEntry .1.3.6.1.4.1.6296.9.5.1.1.6.1 |
dsAdslAtucChanExtnCurrAtmStatusindicates an ncd or lcd failure if the counter surpasses 127. If neither ATM counter surpasses 127, the return value will be 'NoAtmDefect'.ro Enumeration .1.3.6.1.4.1.6296.9.5.1.1.6.1.1 |
dsAdslAtucChanExtnRsSymbolsIndicates number of DMT symbols per Reed-Solomon code word (S) in the downstream direction. Note that S is not restricted to interleaved mode only. Even in fast mode, S is a valid constant value and is equal to 1.ro INTEGER .1.3.6.1.4.1.6296.9.5.1.1.6.1.2 |
dsAdslAtucChanExtnRsDepthIndicates interleaving depth (D) in the downstream direction. Note that D is not restricted to interleaved mode only. Even in fast mode, D is a valid constant value and is equal to 1.ro INTEGER .1.3.6.1.4.1.6296.9.5.1.1.6.1.3 |
dsAdslAtucChanExtnRsRedundancyIndicates number of redundant bytes (R) per Reed-Solomon code in the downstream direction.ro INTEGER .1.3.6.1.4.1.6296.9.5.1.1.6.1.4 |
dsAdslAturChanExtnTableThis table is extention to adslAturChanTable defined in rfc-2662. This table provides one row for each ATUR channel. ADSL channel interfaces are those Interface Table entries where ifType is equal to adslInterleave(124) or adslFast(125). SEQUENCE OF DsAdslAturChanExtnEntry .1.3.6.1.4.1.6296.9.5.1.1.7 |
dsAdslAturChanExtnEntryAn entry (conceptual row) in the dsAdslAturChanExtnTable.
The Table is indexed by IfIndex. DsAdslAturChanExtnEntry .1.3.6.1.4.1.6296.9.5.1.1.7.1 |
dsAdslAturChanExtnCurrAtmStatusThis object indicates an ncd or lcd failure if the counter surpasses 127. If neither ATM counter surpasses 127, the return value will be NoAtmDefect.ro Enumeration .1.3.6.1.4.1.6296.9.5.1.1.7.1.1 |
dsAdslAturChanExtnRsSymbolsThis object indicates number of DMT symbols per Reed- Solomon code word (S) in the upstream direction Note that S is not restricted to interleaved mode only. Even in fast mode, S is a valid constant value and is equal to 1.ro Unsigned32 .1.3.6.1.4.1.6296.9.5.1.1.7.1.2 |
dsAdslAturChanExtnRsDepthThis object indicates interleaving depth (D) in the upstream direction Note that D is not restricted to interleaved mode only. Even in fast mode, D is a valid constant value and is equal to 1.ro Unsigned32 .1.3.6.1.4.1.6296.9.5.1.1.7.1.3 |
dsAdslAturChanExtnRsRedundancyThis object indicates number of redundant bytes (R) per Reed-Solomon code in the upstream direction.ro Unsigned32 .1.3.6.1.4.1.6296.9.5.1.1.7.1.4 |
dsAdslAtucPerfDataExtnTableThis table provides one row for each ATUC. This table is extention to adslAtucPerfDataTable defined in rfc-2662. SEQUENCE OF DsAdslAtucPerfDataExtnEntry .1.3.6.1.4.1.6296.9.5.1.1.8 |
dsAdslAtucPerfDataExtnEntryAn entry (conceptual row) in the dsAdslAtucPerfDataExtnTable.
The Table is indexed by ifIndex. DsAdslAtucPerfDataExtnEntry .1.3.6.1.4.1.6296.9.5.1.1.8.1 |
dsAdslAtucPerfDataExtnStatFastRThe value of this object indicates the count of fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.1ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.8.1.1 |
dsAdslAtucPerfDataExtnStatFailedFastRThe value of this object indicates the count of failed fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.2ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.8.1.2 |
dsAdslAtucPerfDataExtnStatSesLThe value of this object indicates the count of severely errored second line. REFERENCE ITU G.997.1 Section 7.2.1.1.7ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.8.1.3 |
dsAdslAtucPerfDataExtnStatUasLThe value of this object indicates the count of unavailable errored seconds. REFERENCE ITU G.997.1 Section 7.2.1.1.9ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.8.1.4 |
dsAdslAtucPerfDataExtnCurr15MinFastRCount of seconds in the current 15 minute interval when there was fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.1ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.8.1.5 |
dsAdslAtucPerfDataExtnCurr15MinFailedFastRCount of seconds in the current 15 minute interval when there was failed fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.2ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.8.1.6 |
dsAdslAtucPerfDataExtnCurr15MinSesLCount of seconds in the current 15 minute interval when there was severely errored seconds. REFERENCE ITU G.997.1 Section 7.2.1.1.7ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.8.1.7 |
dsAdslAtucPerfDataExtnCurr15MinUasLCount of seconds in the current 15 minute interval when there was count for unavailable errored seconds. REFERENCE ITU G.997.1 Section 7.2.1.1.9ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.8.1.8 |
dsAdslAtucPerfDataExtnCurr1DayFastRCount of the number of seconds when there was fast retrains during the current day as measured by adslAtucPerfCurr1Day TimeElapsed. REFERENCE ITU G.997.1 Section 7.4.15.1ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.8.1.9 |
dsAdslAtucPerfDataExtnCurr1DayFailedFastRCount of the number of seconds when there was failed fast retrains during the current day as measured by adslAtucPerfCurr1Day TimeElapsed.REFERENCE ITU G.997.1 Section 7.4.15.2ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.8.1.10 |
dsAdslAtucPerfDataExtnCurr1DaySesLCount of the number of seconds when there was Severely Errored Seconds during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. REFERENCE ITU G.997.1 Section 7.2.1.1.7ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.8.1.11 |
dsAdslAtucPerfDataExtnCurr1DayUasLCount of the number of seconds when there was Unavailable Errored Seconds during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. REFERENCE ITU G.997.1 Section 7.2.1.1.9ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.8.1.12 |
dsAdslAtucPerfDataExtnPrev1DayFastRCount of seconds in the interval when there was fast retrains within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.4.15.1ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.8.1.13 |
dsAdslAtucPerfDataExtnPrev1DayFailedFastRCount of seconds in the interval when there was failed fast retrains within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.4.15.2ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.8.1.14 |
dsAdslAtucPerfDataExtnPrev1DaySesLCount of seconds in the interval when there was severely errored seconds within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.2.1.1.7ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.8.1.15 |
dsAdslAtucPerfDataExtnPrev1DayUasLCount of seconds in the interval when there was unavailable errored seconds within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.2.1.1.9ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.8.1.16 |
dsAdslAtucPerfDataExtnPrev1DayTimeElapsedTotal elapsed seconds in this interval in seconds.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.8.1.17 |
dsAdslAtucPerfDataExtnStatFecsLCount of 1-second intervals with one or more forward error correction (FEC) anomalies since agent reset (Not available for ADSL).ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.8.1.18 |
dsAdslAtucPerfDataExtnCurr15MinFecsLCount of 1-second intervals, in the current 15 minute interval, with one or more forward error correction (FEC) anomalies (Not available for ADSL).ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.8.1.19 |
dsAdslAtucPerfDataExtnCurr1DayFecsLNCount of 1-second intervals, during the current day as measured by adslAtucPerfCurr1Day-TimeElapsed, with one or moreforward error correction (FEC) anomalies (Not available for ADSL).ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.8.1.20 |
dsAdslAtucPerfDataExtnPrev1DayFecsLCount of 1-second intervals, within the most recent previous 1-day period, with one or more forward error correction (FEC) anomalies (Not available for ADSL).ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.8.1.21 |
dsAdslAtucPerfDataExtnStatLossLCount of 1-second intervals containing one or more loss of signal (LOS) defects (Not available for ADSL).ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.8.1.22 |
dsAdslAtucPerfDataExtnCurr15MinLossL.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.8.1.23 |
dsAdslAtucPerfDataExtnCurr1DayLossL.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.8.1.24 |
dsAdslAtucPerfDataExtnPrev1DayLossL.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.8.1.25 |
dsAdslAturPerfDataExtnTableThis table provides one row for each ATU-R. ADSL physical interfaces are those Interface Table Entries where ifType is equal to adsl(94). This table is an extn to 'adslAturPerfDataExtTable' which is part of ADSL-LINE-EXT-MIB (rfc 3440). SEQUENCE OF DsAdslAturPerfDataExtnEntry .1.3.6.1.4.1.6296.9.5.1.1.9 |
dsAdslAturPerfDataExtnEntryAn entry (conceptual row) in the dsAdslAturPerfDataExtnTable.
The Table is indexed by ifIndex. DsAdslAturPerfDataExtnEntry .1.3.6.1.4.1.6296.9.5.1.1.9.1 |
dsAdslAturPerfDataExtnStatSesL.ro Counter32 .1.3.6.1.4.1.6296.9.5.1.1.9.1.1 |
dsAdslAturPerfDataExtnCurr15MinSesL.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.9.1.2 |
dsAdslAturPerfDataExtnCurr1DaySesL.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.9.1.3 |
dsAdslAturPerfDataExtnPrev1DaySesL.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.9.1.4 |
dsAdslAturPerfDataExtnStatUasL.ro Counter32 .1.3.6.1.4.1.6296.9.5.1.1.9.1.5 |
dsAdslAturPerfDataExtnCurr15MinUasL.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.9.1.6 |
dsAdslAturPerfDataExtnCurr1DayUasL.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.9.1.7 |
dsAdslAturPerfDataExtnPrev1DayUasL.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.9.1.8 |
dsAdslAturPerfDataExtnStatFecsLCount of 1-second intervals with one or more far end forward error correction (FFEC) anomalies since agent reset (Not available for ADSL).ro Counter32 .1.3.6.1.4.1.6296.9.5.1.1.9.1.9 |
dsAdslAturPerfDataExtnCurr15MinFecsLCount of 1-second intervals containing one or more far end loss of signal (LOS) defects (Not available for ADSL).ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.9.1.10 |
dsAdslAturPerfDataExtnCurr1DayFecsLCount of 1-second intervals, during the current day as measured by adslAturPerfCurr1Day-TimeElapsed, with one or more far end forward error correction (FFEC) anomalies (Not available for ADSL).ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.9.1.11 |
dsAdslAturPerfDataExtnPrev1DayFecsLCount of 1-second intervals, within the most recent previous 1-day period, with one or more far end forward error correction (FFEC) anomalies (Not available for ADSL).ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.9.1.12 |
dsAdslAturPerfDataExtnStatLossLCount of 1-second intervals containing one or more far end loss of signal (LOS) defects (Not available for ADSL).ro Counter32 .1.3.6.1.4.1.6296.9.5.1.1.9.1.13 |
dsAdslAturPerfDataExtnCurr15MinLossL.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.9.1.14 |
dsAdslAturPerfDataExtnCurr1DayLossL.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.9.1.15 |
dsAdslAturPerfDataExtnPrev1DayLossL.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.9.1.16 |
dsAdslAtucIntervalExtnTableThis table provides one row for each ATUC performance data collection interval. This Table is an extention to adslAtucIntervalTable defined in rfc 2662. SEQUENCE OF DsAdslAtucIntervalExtnEntry .1.3.6.1.4.1.6296.9.5.1.1.10 |
dsAdslAtucIntervalExtnEntryAn entry (conceptual row) in the dsAdslAtucIntervalExtnTable.
The Table is indexed by ifIndex and adslAtucIntervalNumber. DsAdslAtucIntervalExtnEntry .1.3.6.1.4.1.6296.9.5.1.1.10.1 |
dsAdslAtucIntervalExtnFastRThis variable indicates Count of seconds in the interval when there was Fast Retrains.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.10.1.1 |
dsAdslAtucIntervalExtnFailedFastRThis variable indicates Count of seconds in the interval when there was Failed Fast Retrains.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.10.1.2 |
dsAdslAtucIntervalExtnSesLThis variable indicates Count of seconds in the interval when there was severely errored seconds.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.10.1.3 |
dsAdslAtucIntervalExtnUasLThis variable indicates Count of seconds in the interval when there was unavailable errored seconds.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.10.1.4 |
dsAdslAtucIntervalExtnTimeElapsedThis variable indicates the total Elapsed time in this interval.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.10.1.5 |
dsAdslAtucChanPerfDataExtnTableThis table provides one row for each ATUC channel. This table is an extention to adslAtucChanPerfDataTable. SEQUENCE OF DsAdslAtucChanPerfDataExtnEntry .1.3.6.1.4.1.6296.9.5.1.1.12 |
dsAdslAtucChanPerfDataExtnEntryAn entry (conceptual row) in the dsAdslAtucChanPerfDataExtnTable.
The Table is indexed by ifIndex. DsAdslAtucChanPerfDataExtnEntry .1.3.6.1.4.1.6296.9.5.1.1.12.1 |
dsAdslAtucChanPerfDataExtnTimeElapsedTotal elapsed seconds in this interval.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.12.1.1 |
dsAdslAtucChanPerfDataExtnNcdCount of no cell delineation(ncd) on this channel.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.12.1.2 |
dsAdslAtucChanPerfDataExtnOcdCount of out of cell delineation (ocd) on this channel.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.12.1.3 |
dsAdslAtucChanPerfDataExtnHecHeader error check counter(hec) on this channel.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.12.1.4 |
dsAdslAtucChanPerfDataExtnCurr15MinNcdCount of no cell delineation(ncd) on this channel within the current 15 minute time interval.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.12.1.5 |
dsAdslAtucChanPerfDataExtnCurr15MinOcdCount of out of cell delineation (ocd) on this channel within the current 15 minute time interval.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.12.1.6 |
dsAdslAtucChanPerfDataExtnCurr15MinHecHeader error check counter(hec) on this channel within the current 15 minute time interval.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.12.1.7 |
dsAdslAtucChanPerfDataExtnCurr1DayNcdCount of no cell delineation (ncd) on this channel within the current 1 day time interval.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.12.1.8 |
dsAdslAtucChanPerfDataExtnCurr1DayOcdCount of out of cell delineation (ocd) on this channel within the current 1 day time interval.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.12.1.9 |
dsAdslAtucChanPerfDataExtnCurr1DayHecHeader error check counter (hec) on this channel within the current 1 day time interval.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.12.1.10 |
dsAdslAtucChanPerfDataExtnPrev1DayNcdCount of no cell delineation (ncd) on this channel within the most recent previous 1-day period.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.12.1.11 |
dsAdslAtucChanPerfDataExtnPrev1DayOcdCount of out of cell delineation (ocd) on this channel within the most recent previous 1-day period.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.12.1.12 |
dsAdslAtucChanPerfDataExtnPrev1DayHecHeader error check counter(hec) on this channel within the most recent previous 1-day period.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.12.1.13 |
dsAdslAturChanPerfDataExtnTableThis table is extention to adslAturChanPerfDataTable defined in rfc-2662. This table contains the Performance Data for that ATU-R channel (fast or interleaved). SEQUENCE OF DsAdslAturChanPerfDataExtnEntry .1.3.6.1.4.1.6296.9.5.1.1.13 |
dsAdslAturChanPerfDataExtnEntryAn entry (conceptual row) in the dsAdslAturChanPerfDataExtnTable.
The Table is indexed by IfIndex. DsAdslAturChanPerfDataExtnEntry .1.3.6.1.4.1.6296.9.5.1.1.13.1 |
dsAdslAturChanPerfDataExtnNcdNumber of packets with no cell delineation(NCD) error on this channel.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.13.1.1 |
dsAdslAturChanPerfDataExtnHecNumber of packets with Header error check (HEC) error on this channel.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.13.1.2 |
dsAdslAturChanPerfDataExtnCurr15MinNcdNumber of packets with no cell delineation(NCD) error on this channel within the current 15 minute time interval.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.13.1.3 |
dsAdslAturChanPerfDataExtnCurr15MinHecNumber of packets with Header error check (HEC) error on this channel within the current 15 minute time interval.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.13.1.4 |
dsAdslAturChanPerfDataExtnCurr1DayNcdNumber of packets with no cell delineation (NCD) error on this channel within the current 1 day time interval.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.13.1.5 |
dsAdslAturChanPerfDataExtnCurr1DayHecNumber of packets with Header error check (HEC) error on this channel within the current 1 day time interval.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.13.1.6 |
dsAdslAturChanPerfDataExtnPrev1DayNcdNumber of packets with no cell delineation (NCD) error on this channel within the most recent previous period.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.13.1.7 |
dsAdslAturChanPerfDataExtnPrev1DayHecNumber of packets with Header error check (HEC) error on this channel within the most recent previous period.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.13.1.8 |
dsAdslAtucChanIntervalExtnTableThis table provides a row for each ATUC channel's performance data collection interval. This table is an extension to adslAtucChanIntervalTable defined in rfc 2662. SEQUENCE OF DsAdslAtucChanIntervalExtnEntry .1.3.6.1.4.1.6296.9.5.1.1.14 |
dsAdslAtucChanIntervalExtnEntryAn entry (conceptual row) in the dsAdslAtucChanIntervalExtnTable.
The Table is indexed by ifIndex and adslAtucChanIntervalNumber. DsAdslAtucChanIntervalExtnEntry .1.3.6.1.4.1.6296.9.5.1.1.14.1 |
dsAdslAtucChanIntervalExtnTimeElapsedTotal time elapsed (in seconds) in this interval.ro Counter32 .1.3.6.1.4.1.6296.9.5.1.1.14.1.1 |
dsAdslAtucChanIntervalExtnNcdIndicates count of no cell delineation on this channel for this interval.ro Counter32 .1.3.6.1.4.1.6296.9.5.1.1.14.1.2 |
dsAdslAtucChanIntervalExtnOcdIndicates count of out cell delineation on this channel for this interval.ro Counter32 .1.3.6.1.4.1.6296.9.5.1.1.14.1.3 |
dsAdslAtucChanIntervalExtnHecIndicates Header error check counter on this channel during this interval.ro Counter32 .1.3.6.1.4.1.6296.9.5.1.1.14.1.4 |
dsAdslAturChanIntervalExtnTableThis table is extention to adslAturChanIntervalTable defined in rfc-2662. This table provides one row for each ATUR channel's performance data collection interval. SEQUENCE OF DsAdslAturChanIntervalExtnEntry .1.3.6.1.4.1.6296.9.5.1.1.15 |
dsAdslAturChanIntervalExtnEntryAn entry (conceptual row) in the dsAdslAturChanIntervalExtnTable.
The Table is indexed by IfIndex and dsAdslAturChanIntervalExtnNumber. DsAdslAturChanIntervalExtnEntry .1.3.6.1.4.1.6296.9.5.1.1.15.1 |
dsAdslAturChanIntervalExtnNcdIndicates count of no cell delineation on this channel for this interval.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.15.1.1 |
dsAdslAturChanIntervalExtnHecIndicates Header error check counter on this channel during this interval.ro Gauge32 .1.3.6.1.4.1.6296.9.5.1.1.15.1.2 |
dsAdslLineConfProfileExtnTableThis table contains information on the ADSL line configuration. This Table is an extension to adslLineConfProfileTable. SEQUENCE OF DsAdslLineConfProfileExtnEntry .1.3.6.1.4.1.6296.9.5.1.1.16 |
dsAdslLineConfProfileExtnEntryAn entry (conceptual row) in the dsAdslLineConfProfileExtnTable.
The Table is indexed by adslLineConfProfileName. DsAdslLineConfProfileExtnEntry .1.3.6.1.4.1.6296.9.5.1.1.16.1 |
dsAdslLineConfProfileNameThis object is used by the line configuration table in order to identify a row of this table. OCTET STRING (SIZE ( 0..32 ) ) .1.3.6.1.4.1.6296.9.5.1.1.16.1.1 |
dsAdslLineConfProfileExtnRsIntCorrectionUpSets the correction time for the upstream-interleaved buffer. RS can also be disabled. The Default Value for ADSL+ is 3.rw Enumeration .1.3.6.1.4.1.6296.9.5.1.1.16.1.3 |
dsAdslLineConfProfileExtnLineTypeThis object is used to configure the ADSL physical line mode.rw Enumeration .1.3.6.1.4.1.6296.9.5.1.1.16.1.4 |
dsAdslLineConfProfileExtnTxEndBinHighest bin number allowed for Tx signal. The Range & default for ADSL+ is 0x06 - 0x1ff and 0x1ff respectively.rw INTEGER ( 6..511 ) .1.3.6.1.4.1.6296.9.5.1.1.16.1.5 |
dsAdslLineConfProfileExtnTxStartBinLowest bin number allowed for Tx signal.The Range for ADSL+ is 0x06 - 0x1ff. The Default for Annex B is 0x40 respectively.rw INTEGER ( 6..511 ) .1.3.6.1.4.1.6296.9.5.1.1.16.1.6 |
dsAdslLineConfProfileExtnRxStartBinLowest bin number allowed for Rx signal. The Range for ADSL+ is 0x01 - 0x1ff. The default for Annex B is 0x01.rw INTEGER ( 1..511 ) .1.3.6.1.4.1.6296.9.5.1.1.16.1.8 |
dsAdslLineConfProfileExtnRxEndBinHighest bin number allowed for Rx signal. The Range and default value for ADSL+ is 0x01 - 0x1ff and 0x1d respectively.rw INTEGER ( 6..511 ) .1.3.6.1.4.1.6296.9.5.1.1.16.1.9 |
dsAdslLineConfProfileExtnRxBinAdjustEmploys Rx Start/End bin settings.rw Enumeration .1.3.6.1.4.1.6296.9.5.1.1.16.1.10 |
dsAdslLineConfProfileExtnStandardPreferred standard compliance. Outcome is dependent upon standard support of the remote unit.GlobespanVirata High Speed ADSL DMT (ADSL+) applications only.rw Enumeration .1.3.6.1.4.1.6296.9.5.1.1.16.1.13 |
dsAdslLineConfProfileExtnTxPowerAttenuationSpecifies value of Tx power attenuation.rw Enumeration .1.3.6.1.4.1.6296.9.5.1.1.16.1.15 |
dsAdslLineConfProfileExtnRsFastOvrhdDownSets the percentage overhead for the downstream-fast buffer.rw Enumeration .1.3.6.1.4.1.6296.9.5.1.1.16.1.17 |
dsAdslLineConfProfileExtnIntCorrectionDownThis parameter sets the correction time for the downstream interleaved buffer.RS can also be disabled.rw Enumeration .1.3.6.1.4.1.6296.9.5.1.1.16.1.18 |
dsAdslLineConfProfileExtnRsFastOvrhdUpSets the 4576014verhead for the upstream-fast buffer.rw Enumeration .1.3.6.1.4.1.6296.9.5.1.1.16.1.19 |
dsAdslLineConfProfileExtnAnnexTypeThis parameter is set as per annex compliance of the code release. GlobespanVirata High Speed ADSL DMT (ADSL+) applications only.rw Enumeration .1.3.6.1.4.1.6296.9.5.1.1.16.1.26 |
dsAdslLineConfProfileExtnMaxDCoThis object is used to indicate Maximum interleaving depth supported by the customer's hardware.rw Enumeration .1.3.6.1.4.1.6296.9.5.1.1.16.1.30 |
dsAdslLineConfProfileExtnAdvertisedCapabilitiesControls if the CO will attempt to startup using alternate standards if the CPE does not support ADSL+.rw Enumeration .1.3.6.1.4.1.6296.9.5.1.1.16.1.32 |
dsAdslLineConfProfileExtnPsdMaskTypeSelects the PSD mask option to be used.rw Enumeration .1.3.6.1.4.1.6296.9.5.1.1.16.1.33 |
dsAdslLineConfProfileExtnLineDmtConfModeSelects if there is overlap or no overlap of bins.rw Enumeration .1.3.6.1.4.1.6296.9.5.1.1.16.1.34 |
dsAdslLineConfProfileExtnUpstreamPSDThis object sets the upstream PSD to be either extended or standard. Used for GSpan Plus only.rw Enumeration .1.3.6.1.4.1.6296.9.5.1.1.16.1.41 |
dsAdslLineConfProfileExtnPMModePM-related parameter used by the ATU-C to set the allowed link states.rw Bits .1.3.6.1.4.1.6296.9.5.1.1.16.1.42 |
dsAdslLineConfProfileExtnPML0TimePM configuration parameter, related to the L2 low power state. This parameter represents the minimum time (in seconds) between an exit from the L2 state and the next entry into the L2 state.rw INTEGER ( 0..255 ) .1.3.6.1.4.1.6296.9.5.1.1.16.1.43 |
dsAdslLineConfProfileExtnPML2TimePM configuration parameter, related to the L2 low power state. This parameter represents the minimum time (in seconds) between an Entry into the L2 state and the first Power Trim in the L2 state and between two consecutive Power Trims in the L2 State.rw INTEGER ( 0..255 ) .1.3.6.1.4.1.6296.9.5.1.1.16.1.44 |
dsAdslLineConfProfileExtnPML2ATPRPM configuration parameter, related to the L2 low power state. This parameter represents the maximum aggregate transmit power reduction (in dB) that can be performed through a single Power Trim in the L2 state.rw INTEGER ( 0..31 ) .1.3.6.1.4.1.6296.9.5.1.1.16.1.45 |
dsAdslLineConfProfileExtnPML2RatePM configuration parameter, related to the L2 low power state. This parameter specifies the minimum net data rate during the low power state (L2). The data rate is coded in bit/s.rw INTEGER ( 256000..1024000 ) .1.3.6.1.4.1.6296.9.5.1.1.16.1.46 |
dsAdslLineConfProfileExtnAtucConfMinINPParameter used to specify the minimum impulse noise protection
for the downstream bearer channel.ro INTEGER ( 0..400 ) .1.3.6.1.4.1.6296.9.5.1.1.16.1.63 |
dsAdslLineConfProfileExtnPML2EntryThresholdRatePM configuration parameter, related to the L2 low power state.
This parameter specifies the downstream data rate threshold
that triggers autonomous entry into low power state (L2). The data rate
is coded in bit/s, and must be less than or equal to the value of
GSMIB_adslAtucConfGsPML2Exit ThresholdRate.rw INTEGER ( 256000..1024000 ) .1.3.6.1.4.1.6296.9.5.1.1.16.1.64 |
dsAdslLineConfProfileExtnPML2ExitThresholdRatePM configuration parameter, related to the L2 low power state.
This parameter specifies the downstream data rate threshold
that triggers autonomous exit from low power state (L2). The data rate
is coded in bit/s, and must be less than the value of
GSMIB_adslAtucConfPML2MinRate.rw INTEGER ( 256000..1024000 ) .1.3.6.1.4.1.6296.9.5.1.1.16.1.65 |
dsAdslLineConfProfileExtnPML2EntryRateMinTimePM configuration parameter, related to the L2 low power state.
This parameter specifies the minimum interval of time that the
net data rate for the bearer channel should stay below
GSMIB_adslAtucConfGsPML2EntryThresholdRate before
autonomous entry into low power state (L2).
The minimum entry rate time is coded in seconds, and can
range from 900 to 65535.rw INTEGER ( 900..65535 ) .1.3.6.1.4.1.6296.9.5.1.1.16.1.66 |
dsAdslLineAlarmConfProfileExtnTableThis table contains information on the ADSL line configuration. This table is an extention to adslLineAlarmConfProfileExtnTable defined in rfc 2662. SEQUENCE OF DsAdslLineAlarmConfProfileExtnEntry .1.3.6.1.4.1.6296.9.5.1.1.17 |
dsAdslLineAlarmConfProfileExtnEntryAn entry (conceptual row) in the dsAdslLineAlarmConfProfileExtnTable.
The Table is indexed by adslLineAlarmConfProfileName. DsAdslLineAlarmConfProfileExtnEntry .1.3.6.1.4.1.6296.9.5.1.1.17.1 |
dsAdslLineAlarmConfProfileNameThis object is used by the line alarm configuration Extn table in order to identify a row of this table. When `dynamic' profiles are implemented, the profile name is user specified. Also, the system will always provide a default profile whose name is `DEND OCTET STRING (SIZE ( 0..32 ) ) .1.3.6.1.4.1.6296.9.5.1.1.17.1.1 |
dsAdslLineAlarmExtnAtucThresh15MinFailFastRThe number of failed retrains encountered by an ADSL interface within any giving 15 minutes performance data collection period, which cause the SNMP agent to send an adslAtucFailedFastRTrap.rw INTEGER ( 0..900 ) .1.3.6.1.4.1.6296.9.5.1.1.17.1.2 |
dsAdslLineAlarmExtnAtucThresh15MinSesLThe number of Severe errored seconds encountered by an ADSL interface within any giving 15 minutes performance data collection period, which cause the SNMP to send an adslAtucSesLTrap.rw INTEGER ( 0..900 ) .1.3.6.1.4.1.6296.9.5.1.1.17.1.3 |
dsAdslLineAlarmExtnAtucThresh15MinUasLThe first time the value of the corresponding instance of adslAtucPerf15MinUasL reaches or exceeds this value within a given 15-minute performance data collection period, an adslAtucUasLThreshTrap notifications will be generated.rw INTEGER ( 0..900 ) .1.3.6.1.4.1.6296.9.5.1.1.17.1.4 |
dsAdslLineAlarmExtnAtucOpStateTrapEnableEnables and disables the OpStateChangeTrap.rw Enumeration .1.3.6.1.4.1.6296.9.5.1.1.17.1.5 |
dsAdslLineAlarmExtnAtucThresh15MinFecsLThe number of Forward error correction seconds encountered by an ADSL interface within any giving 15 Minutes performance data collection period, which cause the SNMP agent to send an ' dsAdslAtucTrapsPerfFecsLThresh'.rw Integer32 ( 0..900 ) .1.3.6.1.4.1.6296.9.5.1.1.17.1.6 |
dsAdslLineAlarmExtnAtucThresh1DayLofsThe number of Loss of Frame Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfLofsThresh1DayTrap'.rw Integer32 ( 0..86400 ) .1.3.6.1.4.1.6296.9.5.1.1.17.1.7 |
dsAdslLineAlarmExtnAtucThresh1DayLossThe number of Loss of Signal Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfLossThresh1DayTrap'.rw Integer32 ( 0..86400 ) .1.3.6.1.4.1.6296.9.5.1.1.17.1.8 |
dsAdslLineAlarmExtnAtucThresh1DayLolsThe number of Loss of Link Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfLolsThresh1DayTrap'.rw Integer32 ( 0..86400 ) .1.3.6.1.4.1.6296.9.5.1.1.17.1.9 |
dsAdslLineAlarmExtnAtucThresh1DayLprsThe number of Loss of Power Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfLprsThresh1DayTrap'.rw Integer32 ( 0..86400 ) .1.3.6.1.4.1.6296.9.5.1.1.17.1.10 |
dsAdslLineAlarmExtnAtucThresh1DayESsThe number of Errored Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfESsThresh1DayTrap'.rw Integer32 ( 0..86400 ) .1.3.6.1.4.1.6296.9.5.1.1.17.1.11 |
dsAdslLineAlarmExtnAtucThresh1DaySesLThe number of Severe errored Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfSesLThresh1DayTrap'.rw Integer32 ( 0..86400 ) .1.3.6.1.4.1.6296.9.5.1.1.17.1.12 |
dsAdslLineAlarmExtnAtucThresh1DayUasLThe number of unavailable errored seconds encountered by an ADSL interface within any giving 1 day performance data collection period, which cause the SNMP agent to send an 'dsAdslAtucPerfUasLThresh1DayTrap'.rw Integer32 ( 0..86400 ) .1.3.6.1.4.1.6296.9.5.1.1.17.1.13 |
dsAdslLineAlarmExtnAtucThresh1DayFecsLThe number of Forward error correction seconds encountered by an ADSL interface within any giving 1 day performance data collection period, which cause the SNMP agent to send an ' dsAdslAtucTrapsPerfFecsLThresh1Day'.rw Integer32 ( 0..86400 ) .1.3.6.1.4.1.6296.9.5.1.1.17.1.14 |
dsAdslLineAlarmExtnAturThresh15MinFecsLThe number of Forward error correction seconds encountered by an ADSL interface within any giving 15 Minutes performance data collection period, which cause the SNMP agent to send an ' dsAdslAturTrapsPerfFecsLThresh'.rw Integer32 ( 0..900 ) .1.3.6.1.4.1.6296.9.5.1.1.17.1.15 |
dsAdslLineAlarmExtnAturThresh1DayLofsThe number of Loss of Frame Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfLofsThresh1DayTrap'.rw Integer32 ( 0..86400 ) .1.3.6.1.4.1.6296.9.5.1.1.17.1.16 |
dsAdslLineAlarmExtnAturThresh1DayLossThe number of Loss of Signal Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfLossThresh1DayTrap'.rw Integer32 ( 0..86400 ) .1.3.6.1.4.1.6296.9.5.1.1.17.1.17 |
dsAdslLineAlarmExtnAturThresh1DayLprsThe number of Loss of Power Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfLprsThresh1DayTrap'.rw Integer32 ( 0..86400 ) .1.3.6.1.4.1.6296.9.5.1.1.17.1.18 |
dsAdslLineAlarmExtnAturThresh1DayESsThe number of Errored Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfESsThresh1DayTrap'.rw Integer32 ( 0..86400 ) .1.3.6.1.4.1.6296.9.5.1.1.17.1.19 |
dsAdslLineAlarmExtnAturThresh1DaySesLThe number of Severe errored Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfSesLThresh1DayTrap'.rw Integer32 ( 0..86400 ) .1.3.6.1.4.1.6296.9.5.1.1.17.1.20 |
dsAdslLineAlarmExtnAturThresh1DayUasLThe number of unavailable errored seconds encountered by an ADSL interface within any giving 1 day performance data collection period, which cause the SNMP agent to send an 'dsAdslAturPerfUasLThresh1DayTrap'.rw Integer32 ( 0..86400 ) .1.3.6.1.4.1.6296.9.5.1.1.17.1.21 |
dsAdslLineAlarmExtnAturThresh1DayFecsLThe number of Forward error correction seconds encountered by an ADSL interface within any giving 1 day performance data collection period, which cause the SNMP agent to send an ' dsAdslAturTrapsPerfFecsLThresh1Day'.rw Integer32 ( 0..86400 ) .1.3.6.1.4.1.6296.9.5.1.1.17.1.22 |
dsAdslLineAlarmExtnAturThresh15MinSesLThe number of Forward error correction seconds encountered by an ADSL interface within any giving 15 Minutes performance data collection period, which cause the SNMP agent to send an ' dsAdslAtucTrapsPerfFecsLThresh'.rw Integer32 ( 0..900 ) .1.3.6.1.4.1.6296.9.5.1.1.17.1.23 |
dsAdslLineAlarmExtnAturThresh15MinUasLThe number of Forward error correction seconds encountered by an ADSL interface within any giving 15 Minutes performance data collection period, which cause the SNMP agent to send an ' dsAdslAtucTrapsPerfFecsLThresh'.rw Integer32 ( 0..900 ) .1.3.6.1.4.1.6296.9.5.1.1.17.1.24 |
dsAdslLineAlarmExtnAtucPmStateTrapEnableEnables and disables the PmStateChangeTrap.rw Enumeration .1.3.6.1.4.1.6296.9.5.1.1.17.1.25 |
dsAdslTrap OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.5.1.2 |
dsAdslAtucTraps OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.5.1.2.1 |
dsAdslAtucOpStateChangeTrapOperational state of the transceiver is changed NOTIFICATION-TYPE .1.3.6.1.4.1.6296.9.5.1.2.1.1 |
dsAdslAtucPmStateChangeTrapCurrent PM state of the transceiver is changed. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.9.5.1.2.1.2 |
dsAdslAtucPerfFailedFastRThreshTrapFailed retrains 15-minute interval threshold reached NOTIFICATION-TYPE .1.3.6.1.4.1.6296.9.5.1.2.1.3 |
dsAdslAtucPerfSesLThreshTrapSeverely Errored Seconds 15-minute interval threshold reached NOTIFICATION-TYPE .1.3.6.1.4.1.6296.9.5.1.2.1.4 |
dsAdslAtucPerfUasLThreshTrapUnavailable Errored Seconds 15-minute interval threshold reached NOTIFICATION-TYPE .1.3.6.1.4.1.6296.9.5.1.2.1.5 |
dsAdslAtucPerfFecsLThreshTrapForward error correction 15-minute interval threshold reached NOTIFICATION-TYPE .1.3.6.1.4.1.6296.9.5.1.2.1.6 |
dsAdslAtucPerfLofsThresh1DayTrapLoss of Frames 1-day interval threshold reached NOTIFICATION-TYPE .1.3.6.1.4.1.6296.9.5.1.2.1.7 |
dsAdslAtucPerfLossThresh1DayTrapLoss of Signal 1-day interval threshold reached NOTIFICATION-TYPE .1.3.6.1.4.1.6296.9.5.1.2.1.8 |
dsAdslAtucPerfLolsThresh1DayTrapLoss of Link 1-day interval threshold reached NOTIFICATION-TYPE .1.3.6.1.4.1.6296.9.5.1.2.1.9 |
dsAdslAtucPerfLprsThresh1DayTrapLoss of Power 1-day interval threshold reached NOTIFICATION-TYPE .1.3.6.1.4.1.6296.9.5.1.2.1.10 |
dsAdslAtucPerfESsThresh1DayTrapErrored Seconds 1-day interval threshold reached NOTIFICATION-TYPE .1.3.6.1.4.1.6296.9.5.1.2.1.11 |
dsAdslAtucPerfSesLThresh1DayTrapSeverely Errored Seconds 1-day interval threshold reached NOTIFICATION-TYPE .1.3.6.1.4.1.6296.9.5.1.2.1.12 |
dsAdslAtucPerfUasLThresh1DayTrapUnavailable Errored Seconds 1-day interval threshold reached NOTIFICATION-TYPE .1.3.6.1.4.1.6296.9.5.1.2.1.13 |
dsAdslAtucPerfFecsLThresh1DayTrapForward error correction Seconds 1-day interval threshold reached NOTIFICATION-TYPE .1.3.6.1.4.1.6296.9.5.1.2.1.14 |
dsAdslAturTraps OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.5.1.2.2 |
dsAdslAturSesLThreshTrapSeverely Errored Seconds 15-minute interval threshold reached NOTIFICATION-TYPE .1.3.6.1.4.1.6296.9.5.1.2.2.1 |
dsAdslAturUasLThreshTrapUnavailable Errored Seconds 15-minute interval threshold reached NOTIFICATION-TYPE .1.3.6.1.4.1.6296.9.5.1.2.2.2 |
dsAdslAturPerfFecsLThreshTrapForward error correction 15-minute interval threshold reached NOTIFICATION-TYPE .1.3.6.1.4.1.6296.9.5.1.2.2.3 |
dsAdslAturPerfLofsThresh1DayTrapLoss of Frames 1-day interval threshold reached NOTIFICATION-TYPE .1.3.6.1.4.1.6296.9.5.1.2.2.4 |
dsAdslAturPerfLossThresh1DayTrapLoss of Signal 1-day interval threshold reached NOTIFICATION-TYPE .1.3.6.1.4.1.6296.9.5.1.2.2.5 |
dsAdslAturPerfLprsThresh1DayTrapLoss of Power 1-day interval threshold reached NOTIFICATION-TYPE .1.3.6.1.4.1.6296.9.5.1.2.2.6 |
dsAdslAturPerfESsThresh1DayTrapErrored Seconds 1-day interval threshold reached NOTIFICATION-TYPE .1.3.6.1.4.1.6296.9.5.1.2.2.7 |
dsAdslAturPerfSesLThresh1DayTrapSeverely Errored Seconds 1-day interval threshold reached NOTIFICATION-TYPE .1.3.6.1.4.1.6296.9.5.1.2.2.8 |
dsAdslAturPerfUasLThresh1DayTrapUnavailable Errored Seconds 1-day interval threshold reached NOTIFICATION-TYPE .1.3.6.1.4.1.6296.9.5.1.2.2.9 |
dsAdslAturPerfFecsLThresh1DayTrapForward error correction Seconds 1-day interval threshold is reached NOTIFICATION-TYPE .1.3.6.1.4.1.6296.9.5.1.2.2.10 |