CROSSSTREAM-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CROSSSTREAM-MIB.
141
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
141 total| Object Name |
|---|
artel OBJECT IDENTIFIER .1.3.6.1.4.1.4962 |
RFC1155-SMI Unknown .1.3.6.1.4.1.4962 |
common OBJECT IDENTIFIER .1.3.6.1.4.1.4962.1 |
device OBJECT IDENTIFIER .1.3.6.1.4.1.4962.1.1 |
deviceNameName of the Artel's Productro DisplayString .1.3.6.1.4.1.4962.1.1.1 |
deviceSerialNumSerial number of the device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4962.1.1.2 |
deviceModelNumModel Number of the device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4962.1.1.3 |
deviceFwVerFirmware version of the product in major.minor formro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4962.1.1.4 |
deviceHwVerHardware version of the product in major.minor formro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4962.1.1.5 |
deviceTimeThe current time as measured by the device.
The time is specified as YYYYMMDDHHMM,
where
YYYY - four digits of the year
MM - month (01 through 12)
DD - day of month(01 through 31)
HH - hours(00 through 23)
MM - minutes(00 through 59)rw DisplayString .1.3.6.1.4.1.4962.1.1.6 |
deviceUpTimeThe time when the device is intialized.
The time is specified as YYYYMMDDHHMM,
where
YYYY - four digits of the year
MM - month (01 through 12)
DD - day of month(01 through 31)
HH - hours(00 through 23)
MM - minutes(00 through 59).ro DisplayString .1.3.6.1.4.1.4962.1.1.7 |
deviceIpAddressThis object returns the current IP address of the device when
read and modifies the IP address to the new value when set.rw IpAddress .1.3.6.1.4.1.4962.1.1.8 |
deviceIpNetmaskThis object returns the netmask of the interface when read
and modifies the netmask when set.rw IpAddress .1.3.6.1.4.1.4962.1.1.9 |
deviceGwAddressThis object returns the default gateway address of the device
when read and modifies the default gateway when set.rw IpAddress .1.3.6.1.4.1.4962.1.1.10 |
deviceHostAddressThis object has the host (TFTP) server ip address which
is used for software upgrade.rw IpAddress .1.3.6.1.4.1.4962.1.1.11 |
deviceResetAlways returns '0' when read and resets the device
when set with a nonzero valuerw INTEGER .1.3.6.1.4.1.4962.1.1.12 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.4962.2 |
crossStream OBJECT IDENTIFIER .1.3.6.1.4.1.4962.2.1 |
cstrmControl OBJECT IDENTIFIER .1.3.6.1.4.1.4962.2.1.1 |
vsarResetSetting this object to 1 resets the VSAR chip and initializes
the VSAR control structures by reading from NVRAM.rw INTEGER .1.3.6.1.4.1.4962.2.1.1.1 |
vsarConfigTableThis table contains a list of configuration entries which can
be loaded to VSAR chip or store current configuration to non
volatile memory. SEQUENCE OF VsarConfigEntry .1.3.6.1.4.1.4962.2.1.1.2 |
vsarConfigEntryThis entry contains configurationType, action specifying load/
store. VsarConfigEntry .1.3.6.1.4.1.4962.2.1.1.2.1 |
vsarConfigIndexThe index which points to the different VSAR configurations.ro INTEGER .1.3.6.1.4.1.4962.2.1.1.2.1.1 |
vsarConfigTypeConfiguration type can specify NVRAM configuration, Flash
configuration etc.ro INTEGER .1.3.6.1.4.1.4962.2.1.1.2.1.2 |
vsarConfigActionThis specifies the action to be peformed on the configuration
entry. When set is given with 'load' as action the device is
loaded with the specified configuration type. If a set is given
with 'store' as action, current configuration of the device is
stored in the specified configuartion type.rw Enumeration .1.3.6.1.4.1.4962.2.1.1.2.1.4 |
cstrmInfo OBJECT IDENTIFIER .1.3.6.1.4.1.4962.2.1.2 |
usedAtmStreamsNumberCurrently used number of total available Tranport
streams. This includes active and inactive streamsro INTEGER .1.3.6.1.4.1.4962.2.1.2.1 |
activeAtmStreamsNumberActive Number of Transport Streams running in the
systemro INTEGER .1.3.6.1.4.1.4962.2.1.2.2 |
maxAtmStreamsNumberMax number of available Transport Streams available
in the systemro INTEGER .1.3.6.1.4.1.4962.2.1.2.3 |
usedAsiStreamsNumberCurrently used number of total available ASI Tranport
streams. This includes active and inactive streamsro INTEGER .1.3.6.1.4.1.4962.2.1.2.4 |
activeAsiStreamsNumberActive Number of ASI Transport Streams running in the
systemro INTEGER .1.3.6.1.4.1.4962.2.1.2.5 |
maxAsiStreamsNumberMax number of available ASI Transport Streams available
in the systemro INTEGER .1.3.6.1.4.1.4962.2.1.2.6 |
usedProgsNumberCurrently used number of programs. This includes
active and inactive programsro INTEGER .1.3.6.1.4.1.4962.2.1.2.7 |
activeProgsNumberActive number of programs running in the systemro INTEGER .1.3.6.1.4.1.4962.2.1.2.8 |
maxProgsNumberMax number of programs available in the systemro INTEGER .1.3.6.1.4.1.4962.2.1.2.9 |
usedPidsNumberCurrently used number of total available PIDs. This
includes active and inactive PIDsro INTEGER .1.3.6.1.4.1.4962.2.1.2.10 |
activePidsNumberActive number of PIDs running in the systemro INTEGER .1.3.6.1.4.1.4962.2.1.2.11 |
maxPidsNumberMax number of available PIDs in the systemro INTEGER .1.3.6.1.4.1.4962.2.1.2.12 |
usedConnectionsNumberCurrently used number of total available connection objects.ro INTEGER .1.3.6.1.4.1.4962.2.1.2.13 |
maxConnectionsNumberMax number of available connection objects.ro INTEGER .1.3.6.1.4.1.4962.2.1.2.14 |
cstrmEvents OBJECT IDENTIFIER .1.3.6.1.4.1.4962.2.1.3 |
cstrmOverTempA cstrmOverTemp trap signifies that one or more of
the temperature sensors has exceeded its high
threshhold level. The values of the 4 temperature
sensors are sent in Degrees Celsius with the trap. TRAP-TYPE .1.3.6.1.4.1.4962.2.1.3.0.1 |
cstrmCoolFailA cstrmCoolFail trap signifies that a cooling system
failure has occured. TRAP-TYPE .1.3.6.1.4.1.4962.2.1.3.0.2 |
cstrmPowerMonitorA cstrmPowerMonitor trap signifies that one or more of
the voltage sensors is out of acceptable range.
The values of the 3 voltage sensors are sent in
100ths of milivolts. TRAP-TYPE .1.3.6.1.4.1.4962.2.1.3.0.3 |
cstrmATMPhyTrap TRAP-TYPE .1.3.6.1.4.1.4962.2.1.3.0.4 |
cstrmOAMVPTrap TRAP-TYPE .1.3.6.1.4.1.4962.2.1.3.0.5 |
cstrmOAMVCTrap TRAP-TYPE .1.3.6.1.4.1.4962.2.1.3.0.6 |
cstrmSONETTrap TRAP-TYPE .1.3.6.1.4.1.4962.2.1.3.0.7 |
cstrmActDeActTrapThis Trap is generated for each of Activate and Deactivate event Alarm. TRAP-TYPE .1.3.6.1.4.1.4962.2.1.3.0.8 |
cstrmIngressPidsChangedTrapThis Trap is generated for each of Activate and Deactivate event Alarm. TRAP-TYPE .1.3.6.1.4.1.4962.2.1.3.0.9 |
cstrmDiags OBJECT IDENTIFIER .1.3.6.1.4.1.4962.2.1.4 |
cstrmAirTempThe ambient temperature in degrees Centigrade at the center of
the main logic board.ro INTEGER .1.3.6.1.4.1.4962.2.1.4.1 |
cstrmCoreRegTempThe case temperature in degrees Centigrade of the Core 5 volt
voltage regulator I.C.ro INTEGER .1.3.6.1.4.1.4962.2.1.4.2 |
cstrm3VRegTempThe case temperature in degrees Centigrade of the 3.3 volt
voltage regulator I.C.ro INTEGER .1.3.6.1.4.1.4962.2.1.4.3 |
cstrmHotICTempThe case temperature in degrees Centigrade of the designated
hottest I.C. on the main board.ro INTEGER .1.3.6.1.4.1.4962.2.1.4.4 |
cstrm5VCoreVoltageThe voltage in 1/100ths of a volt of the 5 volt core regulator.ro INTEGER .1.3.6.1.4.1.4962.2.1.4.5 |
cstrm3VCoreVoltageThe voltage in 1/100ths of a volt of the 3.3 volt core regulator.ro INTEGER .1.3.6.1.4.1.4962.2.1.4.6 |
cstrm3VIOVoltageThe voltage in 1/100ths of a volt of the 3.3 volt I/O regulator.ro INTEGER .1.3.6.1.4.1.4962.2.1.4.7 |
cstrmStreamGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4962.2.1.5 |
streamNextIndexTo create a new entry in streamTable, management station
has to first get this object value. The value 0 indicates
that no assigned values are available. After each retrieval
operation from management stations, agent should modify this to
next unassigned index.ro INTEGER .1.3.6.1.4.1.4962.2.1.5.1 |
streamTableA list of stream entries.
An entry specifies the stream type, name and
direction. It doesn't included stream specific
parameters. SEQUENCE OF StreamEntry .1.3.6.1.4.1.4962.2.1.5.2 |
streamEntryAn entry in the stream table.
This entry is used to specify the stream type,
stream direction and stream status. StreamEntry .1.3.6.1.4.1.4962.2.1.5.2.1 |
streamIndexA unique integer handle that identifies a stream.ro INTEGER .1.3.6.1.4.1.4962.2.1.5.2.1.1 |
ingressStateThis object specifies the status of the stream in ingress
direction. The ingressState can be set to only 'inactive' by
the management station. It is automatically set to 'active'
by the agent when a valid connection is established.rw StreamState .1.3.6.1.4.1.4962.2.1.5.2.1.2 |
egressStateThis object specifies the status of the stream in egress
direction.rw StreamState .1.3.6.1.4.1.4962.2.1.5.2.1.3 |
streamTypeThis object specifies the type of the stream.rw StreamType .1.3.6.1.4.1.4962.2.1.5.2.1.4 |
streamNameThis object specifies the name of the stream.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4962.2.1.5.2.1.5 |
streamStatusThis object specifies the status of stream entry.rw ConnectionStatus .1.3.6.1.4.1.4962.2.1.5.2.1.6 |
ingressStreamTableThis table contains ingress stream configuration parameters,
one entry per streamTable for which streamDirection is ingress. SEQUENCE OF IngressStreamEntry .1.3.6.1.4.1.4962.2.1.5.3 |
ingressStreamEntryAn ingress entry specifies the cell rate of the stream. IngressStreamEntry .1.3.6.1.4.1.4962.2.1.5.3.1 |
ingressStreamCellRateSpecifies the cellrate of the ingress stream.rw INTEGER .1.3.6.1.4.1.4962.2.1.5.3.1.1 |
egressStreamTableThis table contains egress stream configuration parameters,
one entry per streamTable for which streamDirection is egress. SEQUENCE OF EgressStreamEntry .1.3.6.1.4.1.4962.2.1.5.4 |
egressStreamEntryAn egress entry specifies the transport stream rate, buffer
control parameters, elasticity table parameters, divisor for
center rate of elasticity window. EgressStreamEntry .1.3.6.1.4.1.4962.2.1.5.4.1 |
egressStreamTsRateTransport rate for this egress stream.rw INTEGER .1.3.6.1.4.1.4962.2.1.5.4.1.1 |
egressStreamNumBufsNumber of buffers to be allocated for this egress stream.
Setting this '0' to will deallocate the memory. Modify this
value to change the number of buffers from current value.rw INTEGER .1.3.6.1.4.1.4962.2.1.5.4.1.2 |
egressStreamBufThresholdSpecifies the uniform dealy threshold for this egress stream.rw INTEGER .1.3.6.1.4.1.4962.2.1.5.4.1.3 |
egressStreamBufSizeSize of each buffer allocated in egress pool.rw INTEGER .1.3.6.1.4.1.4962.2.1.5.4.1.4 |
egressStreamJitterEnable/disable Jitter Attenuation for this egress stream.rw Enumeration .1.3.6.1.4.1.4962.2.1.5.4.1.5 |
atmStreamTableThis table contains ATM stream configuration parameters,
one entry per streamTable for which streamType is ATM. SEQUENCE OF AtmStreamEntry .1.3.6.1.4.1.4962.2.1.5.5 |
atmStreamEntryAn ATM Transport Stream entry contains vpi and vci AtmStreamEntry .1.3.6.1.4.1.4962.2.1.5.5.1 |
atmStreamVpiVPI associated with the ATM Streamrw INTEGER .1.3.6.1.4.1.4962.2.1.5.5.1.1 |
atmStreamVciVCI associated with the VCB.rw INTEGER .1.3.6.1.4.1.4962.2.1.5.5.1.2 |
asiStreamTableThis table contians ASI stream configuration parameters,
one entry per streamTable for which streamType is ASI. SEQUENCE OF AsiStreamEntry .1.3.6.1.4.1.4962.2.1.5.6 |
asiStreamEntryAn ASI Transport stream entry specifies the port number. AsiStreamEntry .1.3.6.1.4.1.4962.2.1.5.6.1 |
asiStreamPortPhysical port number of the ASI stream.rw INTEGER .1.3.6.1.4.1.4962.2.1.5.6.1.1 |
asiStreamChannelChannel associated with this ASI stream.rw INTEGER .1.3.6.1.4.1.4962.2.1.5.6.1.2 |
progNextTableTo create a new entry in progTable, management station
has to first get next program index. SEQUENCE OF ProgNextEntry .1.3.6.1.4.1.4962.2.1.5.7 |
progNextEntryThis entry contains next program index that can by used by
the management stations to add a program in a stream. ProgNextEntry .1.3.6.1.4.1.4962.2.1.5.7.1 |
progNextIndexReturns an index that can be associated with the given stream.
The value '0' indicates that no assigned values are available.
After each retrieval operation from management station, agent
should modify this to next unassigned index.ro INTEGER .1.3.6.1.4.1.4962.2.1.5.7.1.1 |
progTableA list of programs linked to one VCB. The number of entries
is given by numProgs. SEQUENCE OF ProgEntry .1.3.6.1.4.1.4962.2.1.5.8 |
progEntryprogEntry contains program number, program name, TS rate, TS
len. ProgEntry .1.3.6.1.4.1.4962.2.1.5.8.1 |
progIndexA unique handle which identies a program.ro INTEGER .1.3.6.1.4.1.4962.2.1.5.8.1.1 |
progNumberProgram number which identifies a program in a VCB.rw INTEGER .1.3.6.1.4.1.4962.2.1.5.8.1.2 |
progNameHuman readable program name corresponding to the program
number of this entry.rw DisplayString .1.3.6.1.4.1.4962.2.1.5.8.1.3 |
progTsRateAggregate tranport rate of the program.rw INTEGER .1.3.6.1.4.1.4962.2.1.5.8.1.4 |
progTsLenLength of the transport stream packet.rw INTEGER .1.3.6.1.4.1.4962.2.1.5.8.1.5 |
progStatusStatus of this program associated with the VCB.rw ConnectionStatus .1.3.6.1.4.1.4962.2.1.5.8.1.6 |
pidNextTableTo create a new entry pidTable, management stations has
to first retrieve a next available pid index. SEQUENCE OF PidNextEntry .1.3.6.1.4.1.4962.2.1.5.9 |
pidNextEntryThis entry contains next pid index that can by used by
the mangement stations to add a pid to the given stream and
program. PidNextEntry .1.3.6.1.4.1.4962.2.1.5.9.1 |
pidNextIndexReturns an index that can be associated with the given stream
and program. The value '0' indicates taht no assigned values are
available. After each retrieval operation from management station,
agent should modify this to next unassigned index.ro INTEGER .1.3.6.1.4.1.4962.2.1.5.9.1.1 |
pidTableList of pids linked to one program. The number of entries
is given by numPIDs. SEQUENCE OF PidEntry .1.3.6.1.4.1.4962.2.1.5.10 |
pidEntrypidEntry contains pid number, remap pid number, table
identifier, pid transport rate. PidEntry .1.3.6.1.4.1.4962.2.1.5.10.1 |
pidIndexA unique integer pid Handle identifying a PID.ro INTEGER .1.3.6.1.4.1.4962.2.1.5.10.1.1 |
pidNumberpid number which uniquely identifies a PID in a program.rw INTEGER .1.3.6.1.4.1.4962.2.1.5.10.1.2 |
pidTableIDtable type identifier of this PID. This is
0 - Program Association Table
1 - Program MAP Table
2 - PCR PID
>2 - Check the manual.rw INTEGER .1.3.6.1.4.1.4962.2.1.5.10.1.3 |
pidRateTranport rate of a specific PID.rw INTEGER .1.3.6.1.4.1.4962.2.1.5.10.1.4 |
pidStatusThe status of this PID.rw ConnectionStatus .1.3.6.1.4.1.4962.2.1.5.10.1.5 |
cstrmConnNextIndexReturns the next free Index in the connection table.ro INTEGER .1.3.6.1.4.1.4962.2.1.5.11 |
cstrmConnTableA list of Dipersal Entries.. SEQUENCE OF CstrmConnEntry .1.3.6.1.4.1.4962.2.1.5.12 |
cstrmConnEntryAn cstrmConnEntry contains source program, source pid, dest
program dest pid and asiStreamIndex values. This is the entry
through which management station connect source programs to
destination programs. CstrmConnEntry .1.3.6.1.4.1.4962.2.1.5.12.1 |
cstrmConnIndexIndex to identify a Connection Table.ro INTEGER .1.3.6.1.4.1.4962.2.1.5.12.1.1 |
ingressStreamIndexValIndex of the ingress stream.rw INTEGER .1.3.6.1.4.1.4962.2.1.5.12.1.2 |
egressStreamIndexValIndex of the egress streamrw INTEGER .1.3.6.1.4.1.4962.2.1.5.12.1.3 |
ingressProgIndexSource program number associated with the connection table.
Source program number is linked to an ingress stream.
A value of 'zero' indicates that all programs in the parent
stream are connected to the egress stream.rw INTEGER .1.3.6.1.4.1.4962.2.1.5.12.1.4 |
ingressPidIndexSource PID number associated with the connection table.
Source PID number is linked to an ingress stream.
A value of 'zero' indicates that all pids in the parent
program are connected to the egress stream.rw INTEGER .1.3.6.1.4.1.4962.2.1.5.12.1.5 |
egressProgNumDestination program number associated with the connection table.
Destination program number is linked to an egress stream.rw INTEGER .1.3.6.1.4.1.4962.2.1.5.12.1.6 |
egressPidNumDestination PID number associated with the connection table.
Destination PID number is linked to an egress stream.rw INTEGER .1.3.6.1.4.1.4962.2.1.5.12.1.7 |
pcrAdjustEnable/Disable PCR Time Stamp Adjustment for this
connection.rw Enumeration .1.3.6.1.4.1.4962.2.1.5.12.1.8 |
cstrmConnStatusStatus of the this connection table.rw ConnectionStatus .1.3.6.1.4.1.4962.2.1.5.12.1.9 |
connectionStreamTableConnection Stream table is used to traverse the stream
connections. SEQUENCE OF ConnectionStreamEntry .1.3.6.1.4.1.4962.2.1.5.13 |
connectionStreamEntryThis entry has the connection index for the associated stream.
If the ConnectionIndex is zero, connectionStreamIndex will return
first connection object for this association. ConnectionStreamEntry .1.3.6.1.4.1.4962.2.1.5.13.1 |
connectionStreamIndexReturns an active connection object index connected to/from
the given stream index.ro INTEGER .1.3.6.1.4.1.4962.2.1.5.13.1.1 |
connectionProgTableConnection Prog table is used to traverse the program
connections. SEQUENCE OF ConnectionProgEntry .1.3.6.1.4.1.4962.2.1.5.14 |
connectionProgEntryThis entry has the connection index for the given program in
the specified stream object. If the ConnectionIndex is zero,
connectionProgIndex will return first conneciton object for this
association. ConnectionProgEntry .1.3.6.1.4.1.4962.2.1.5.14.1 |
connectionProgIndexReturns an active connection object index connected to/from
the given program index.ro INTEGER .1.3.6.1.4.1.4962.2.1.5.14.1.1 |
connectionPidTableConnection pid table is used to traverse the pid
connections. SEQUENCE OF ConnectionPidEntry .1.3.6.1.4.1.4962.2.1.5.15 |
connectionPidEntryThis entry has the connection index for the given pid in
the specified program & stream object. If the ConnectionIndex is
zero, connectionPidIndex will return first connection object
for this association. ConnectionPidEntry .1.3.6.1.4.1.4962.2.1.5.15.1 |
connectionPidIndexReturns an active connection object index connected to/from
the given pid index.ro INTEGER .1.3.6.1.4.1.4962.2.1.5.15.1.1 |
cstrmStreamPrivate OBJECT IDENTIFIER .1.3.6.1.4.1.4962.2.1.6 |
cstrmATMPhyTrapID INTEGER .1.3.6.1.4.1.4962.2.1.6.1 |
cstrmATMPhyTrapStatus INTEGER .1.3.6.1.4.1.4962.2.1.6.1.1 |
cstrmOAMVCTrapID INTEGER .1.3.6.1.4.1.4962.2.1.6.2 |
cstrmOAMVCTrapStatus INTEGER .1.3.6.1.4.1.4962.2.1.6.2.1 |
cstrmOAMVPTrapID INTEGER .1.3.6.1.4.1.4962.2.1.6.3 |
cstrmOAMVPTrapStatus INTEGER .1.3.6.1.4.1.4962.2.1.6.3.1 |
cstrmSONETTrapID INTEGER .1.3.6.1.4.1.4962.2.1.6.4 |
cstrmSONETTrapStatus INTEGER .1.3.6.1.4.1.4962.2.1.6.4.1 |
cstrmActDeActTrapID INTEGER .1.3.6.1.4.1.4962.2.1.6.5 |
cstrmActDeActTrapStatus INTEGER .1.3.6.1.4.1.4962.2.1.6.5.1 |
cstrmIngressPidsChangedTrapID INTEGER .1.3.6.1.4.1.4962.2.1.6.6 |
cstrmIngressPidsChangedTrapStatus INTEGER .1.3.6.1.4.1.4962.2.1.6.6.1 |