ARTEL-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ARTEL-MIB.
248
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
248 total| Object Name |
|---|
artel OBJECT IDENTIFIER .1.3.6.1.4.1.139 |
RFC1155-SMI Unknown .1.3.6.1.4.1.139 |
node OBJECT IDENTIFIER .1.3.6.1.4.1.139.1 |
nodeNameThis node's administratively assigned name.rw DisplayString .1.3.6.1.4.1.139.1.1 |
nodeMacSlotMapEach Starbridge board is assigned a base physical address.
The physical address for each port is then assigned as
(baseAddress + portIndex - 1). The nodeMacSlotMap is a
5 element array of the hex coded base addresses contained
in the node with empty slots assigned the base address of
00:00:00:00:00:00.ro Opaque .1.3.6.1.4.1.139.1.2 |
nodeColdBootWhen queried, this object will always return the value 1.
Setting this object to any value causes the node to reset
which has the effect of resetting all the boards in the node.rw INTEGER .1.3.6.1.4.1.139.1.3 |
nodeResetNvRamWhen queried, this object will always return the value 1.
Setting this object to any value causes the node to reset
the non-volatile RAM in each board in the node to default
values.rw INTEGER .1.3.6.1.4.1.139.1.4 |
nodeIpSlotTableA table that contains the IP addresses of the boards in the node. SEQUENCE OF NodeIpSlotEntry .1.3.6.1.4.1.139.1.5 |
nodeIpSlotEntryThe IP address of one of the boards in the node. NodeIpSlotEntry .1.3.6.1.4.1.139.1.5.1 |
nodeIpSlotIndexThe slot number in the node.ro INTEGER .1.3.6.1.4.1.139.1.5.1.1 |
nodeIpSlotAddrThe IP address of the board in slot nodeIpSlotIndex.rw IpAddress .1.3.6.1.4.1.139.1.5.1.2 |
galactica OBJECT IDENTIFIER .1.3.6.1.4.1.139.2 |
board OBJECT IDENTIFIER .1.3.6.1.4.1.139.2.1 |
boardIpAddrThe administratively assigned IP Address for this board.rw IpAddress .1.3.6.1.4.1.139.2.1.1 |
boardResetWhen queried, this object will always return the value 1.
Setting this object to any value causes the board to reset.rw INTEGER .1.3.6.1.4.1.139.2.1.3 |
boardResetNvRamWhen queried, this object will always return the value 1.
Setting this object to any value causes the non-volatile
ram to be reset to their default values.rw INTEGER .1.3.6.1.4.1.139.2.1.4 |
boardLedStatusThe returns 16 bits encoded as an integer that represent
the LEDs found on the front panel of the System Management
board and on internal LED displays on the Starbridge Board.
The most significant bit represents the leftmost LED.
PLEASE NOTE: If the bit is 1 it indicates that the LED is OFF.
If the bit is 0 it indicates that the LED is ON.ro INTEGER .1.3.6.1.4.1.139.2.1.5 |
boardSlotNumThe Galactica Chassis slot that this board resides in. The
slots are numbered 0 thru n with 0 being the bottom slot.ro INTEGER .1.3.6.1.4.1.139.2.1.6 |
boardClassThe type of board/device.ro Enumeration .1.3.6.1.4.1.139.2.1.7 |
boardResetCountsThe number of times the 68K processor on this board has
reset since the last time the non-volatile ram has been
reset to default values.ro Counter .1.3.6.1.4.1.139.2.1.8 |
boardSnmpMibVersionThe version of the Artel Proprietary MIB supported by this board.ro DisplayString .1.3.6.1.4.1.139.2.1.9 |
arcnet OBJECT IDENTIFIER .1.3.6.1.4.1.139.2.2 |
arcnetBoardsPresentA 17 bit bit-significant register returned as an
integer. If the bit is set there is a board in that
slot. The least significant bit represents slot 0. The
most significant bit represents the System Management board.ro INTEGER .1.3.6.1.4.1.139.2.2.1 |
arcnetRxPktsThe total number of packets received by this board over the
internal Arcnet interface.ro Counter .1.3.6.1.4.1.139.2.2.2 |
arcnetTxPktsThe total number of packets transmitted by this board
over the internal Arcnet interface.ro Counter .1.3.6.1.4.1.139.2.2.3 |
arcnetNakCntsThe number of Negative Acknowledgements received by
this board over the internal Arcnet interface when
attemting to transmit.ro Counter .1.3.6.1.4.1.139.2.2.4 |
arcnetMyReconfigCountsThe number of times the internal Arcnet bus has
been reconfigured by this board.ro Counter .1.3.6.1.4.1.139.2.2.5 |
arcnetReconfigCountsThe total number of times the internal Arcnet bus has
been reconfigured since powerup.ro Counter .1.3.6.1.4.1.139.2.2.6 |
arcnetTrashedRxMsgsThe number of Arcnet receive messages that were discarded by
this board.ro Counter .1.3.6.1.4.1.139.2.2.7 |
arcnetTrashedTxMsgsThe number of Arcnet transmit messages that were
discarded by this board.ro Counter .1.3.6.1.4.1.139.2.2.8 |
backplane OBJECT IDENTIFIER .1.3.6.1.4.1.139.2.3 |
bpStatsEnabledThe administrative state of this boards connection to
the Galactica 1 gigabit GBus.rw Enumeration .1.3.6.1.4.1.139.2.3.1 |
bpStatsRxPktsTotal number of packets received by this board from the
Galactica 1 gigabit GBus.ro Counter .1.3.6.1.4.1.139.2.3.2 |
bpStatsRxErrorsNumber of received packets that were received from the
Galactica 1 gigabit GBus that contained errors.ro Counter .1.3.6.1.4.1.139.2.3.3 |
bpStatsTxPktsTotal number of packets transmitted by this board from
the Galactica 1 gigabit GBus.ro Counter .1.3.6.1.4.1.139.2.3.4 |
bpStatsTxErrorsNumber of packets which could not be transmitted because
the receiver board was busy.ro Counter .1.3.6.1.4.1.139.2.3.5 |
bpStatsOperStateOperational state of this boards connection to the
Galactica 1 gigabit GBus.ro Enumeration .1.3.6.1.4.1.139.2.3.6 |
bpStatsInitializeWhen queried, this object will always return the value 1.
Setting this object to any value causes the Backplane statistics
to be cleared.rw INTEGER .1.3.6.1.4.1.139.2.3.7 |
bpStatsTxQOverErrorsA count of the number of overflows of the backplane transmit
queue.ro Counter .1.3.6.1.4.1.139.2.3.8 |
bpStatsRxBusyTableA table stored on each board (except System Managers) that
counts the number of packets transmitted by this board across
the backplane that had to be discarded because the receiving
board was too busy. SEQUENCE OF BpStatsRxBusyTableEntry .1.3.6.1.4.1.139.2.3.9 |
bpStatsRxBusyTableEntryAn entry for another board in the node that counts the number
of backplane packets from this board that the other board was
too busy to receive. BpStatsRxBusyTableEntry .1.3.6.1.4.1.139.2.3.9.1 |
bpStatsRxBusyTableIndexThe slot number of the receiving board.ro INTEGER .1.3.6.1.4.1.139.2.3.9.1.1 |
bpStatsRxBusyTableErrorsA count of the number of backplane packets transmitted by this
board to the board in slot bpStatsRxBusyTableIndex that the
other board was too busy to receive.ro Counter .1.3.6.1.4.1.139.2.3.9.1.2 |
bridge OBJECT IDENTIFIER .1.3.6.1.4.1.139.2.4 |
restrictedTableA table of physical addresses that are restricted from
being bridged through this node. Filtering is done on
both source and destination address. SEQUENCE OF RestrictedEntry .1.3.6.1.4.1.139.2.4.1 |
restrictedEntryInformation needed to restrict a particular physical address. RestrictedEntry .1.3.6.1.4.1.139.2.4.1.1 |
restrictedAddrThe physical address to be restricted.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.139.2.4.1.1.1 |
restrictedStatusIndicates the state of the entry. Invalid items will
be removed from the table.rw Enumeration .1.3.6.1.4.1.139.2.4.1.1.2 |
bridgeAgeNowWhen queried, this object will always return the value 1.
Setting this object to any value causes the forwarding
database to be fully aged.rw INTEGER .1.3.6.1.4.1.139.2.4.2 |
bridgeDot1dEnableEnables and disables the IEE 802.1d Spanning Tree
Protocol for the board.rw Enumeration .1.3.6.1.4.1.139.2.4.3 |
bridgeDot1dResetDefaultsWhen queried, this object will always return the value 1.
Setting this object to any value causes the Spanning
Tree objects to be reset to the default values.rw INTEGER .1.3.6.1.4.1.139.2.4.4 |
bridgeResetPktSwCountA count of the number of times the packet switching
function has been reset.ro INTEGER .1.3.6.1.4.1.139.2.4.6 |
bridgePktSwLastResetThe value of sysUpTime when the packet swtiching
function was last reset.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.139.2.4.7 |
bridgeResetStaticWhen queried, this object will always return the value 1.
Setting this object to any value causes the static table
to be cleared.rw INTEGER .1.3.6.1.4.1.139.2.4.8 |
bridgeRestrictedResetWhen queried, this object will always return the value 1.
Setting this object to any value causes the restricted
table to be cleared.rw INTEGER .1.3.6.1.4.1.139.2.4.9 |
bridgeUdfTableA table maintaining user defined filtering information on
each port on the board. SEQUENCE OF BridgeUdfEntry .1.3.6.1.4.1.139.2.4.11 |
bridgeUdfEntryUser defined filtering information maintained on a single port
and filter. BridgeUdfEntry .1.3.6.1.4.1.139.2.4.11.1 |
bridgeUdfPortIndexThe port number on the board. Same as ifIndex.ro INTEGER .1.3.6.1.4.1.139.2.4.11.1.1 |
bridgeUdfFilterIndexThe filter number for the port.ro INTEGER .1.3.6.1.4.1.139.2.4.11.1.2 |
bridgeUdfStateThe state of this filter. There are four states: disabled,
filter, forward and count. In the disabled state, this filter
is ignored. In the filter state, a packet matching this filter
will be filtered or discarded. In the forward state, a packet
matching this filter will be forwarded. In the count state, a
packet matching this filter will increment the bridgeUdfMatchCounts
and the filter will be ignored for filtering and forwarding
purposes.rw Enumeration .1.3.6.1.4.1.139.2.4.11.1.3 |
bridgeUdfCommentA comment field to describe this filter.rw DisplayString .1.3.6.1.4.1.139.2.4.11.1.4 |
bridgeUdfMatchCountsThe number of packets that matched this filter when the
bridgeUdfState was either filter, forward or count.ro Counter .1.3.6.1.4.1.139.2.4.11.1.5 |
bridgeUdfInitMatchCountWhen read this object always returns 1. When set to any value
it will clear the bridgeUdfMatchCounts object for this port
and filter.rw INTEGER .1.3.6.1.4.1.139.2.4.11.1.6 |
bridgeUdfAddressTypeSource indicates that the address portion of this filter is
using the source MAC address. Destination indicates the address
portion of this filter is using the destination MAC address.rw Enumeration .1.3.6.1.4.1.139.2.4.11.1.7 |
bridgeUdfAddressValueThe data value used for comparison on the MAC address in the
packet.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.139.2.4.11.1.8 |
bridgeUdfAddressMaskThe value used to mask off the data value used for comparison
on the MAC address in the packet. Don't care bits are zero.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.139.2.4.11.1.9 |
bridgeUdfAddressOperandThe operand used in the comparison of the bridgeUdfAddressValue
and the MAC address in the packet.rw Enumeration .1.3.6.1.4.1.139.2.4.11.1.10 |
bridgeUdfTypeValueThe data value used for comparison on the type field in the
packet.rw INTEGER .1.3.6.1.4.1.139.2.4.11.1.11 |
bridgeUdfTypeMaskThe value used to mask off the data value used for comparison
on the type field in the packet. Don't care bits are zero.rw INTEGER .1.3.6.1.4.1.139.2.4.11.1.12 |
bridgeUdfTypeOperandThe operand used in the comparison of the bridgeUdfTypeValue
and the type field in the packet.rw Enumeration .1.3.6.1.4.1.139.2.4.11.1.13 |
bridgeUdfOffset1OffsetThe number of bytes from the start of the MAC header to the
start of the data area in the packet to be used in the filter's
comparison. This value must be divisible by 4.rw INTEGER .1.3.6.1.4.1.139.2.4.11.1.14 |
bridgeUdfOffset1ValueThe data value used for comparison on the offset1 field as
specified by bridgeUdfOffset1Offset in the packet.rw INTEGER .1.3.6.1.4.1.139.2.4.11.1.15 |
bridgeUdfOffset1MaskThe value used to mask off the data value used for comparison
on the offset1 field in the packet. Don't care bits are zero.rw INTEGER .1.3.6.1.4.1.139.2.4.11.1.16 |
bridgeUdfOffset1OperandThe operand used in the comparison of the bridgeUdfOffset1Value
and the type field in the packet.rw Enumeration .1.3.6.1.4.1.139.2.4.11.1.17 |
bridgeUdfOffset2OffsetThe number of bytes from the start of the MAC header to the
start of the data area in the packet to be used in the filter's
comparison. This value must be divisible by 4.rw INTEGER .1.3.6.1.4.1.139.2.4.11.1.18 |
bridgeUdfOffset2ValueThe data value used for comparison on the offset1 field as
specified by bridgeUdfOffset2Offset in the packet.rw INTEGER .1.3.6.1.4.1.139.2.4.11.1.19 |
bridgeUdfOffset2MaskThe value used to mask off the data value used for comparison
on the offset2 field in the packet. Don't care bits are zero.rw INTEGER .1.3.6.1.4.1.139.2.4.11.1.20 |
bridgeUdfOffset2OperandThe operand used in the comparison of the bridgeUdfOffset2Value
and the type field in the packet.rw Enumeration .1.3.6.1.4.1.139.2.4.11.1.21 |
bridgeUdfOffset3OffsetThe number of bytes from the start of the MAC header to the
start of the data area in the packet to be used in the filter's
comparison. This value must be divisible by 4.rw INTEGER .1.3.6.1.4.1.139.2.4.11.1.22 |
bridgeUdfOffset3ValueThe data value used for comparison on the offset1 field as
specified by bridgeUdfOffset3Offset in the packet.rw INTEGER .1.3.6.1.4.1.139.2.4.11.1.23 |
bridgeUdfOffset3MaskThe value used to mask off the data value used for comparison
on the offset3 field in the packet. Don't care bits are zero.rw INTEGER .1.3.6.1.4.1.139.2.4.11.1.24 |
bridgeUdfOffset3OperandThe operand used in the comparison of the bridgeUdfOffset3Value
and the type field in the packet.rw Enumeration .1.3.6.1.4.1.139.2.4.11.1.25 |
bridgeUdfOffset4OffsetThe number of bytes from the start of the MAC header to the
start of the data area in the packet to be used in the filter's
comparison. This value must be divisible by 4.rw INTEGER .1.3.6.1.4.1.139.2.4.11.1.26 |
bridgeUdfOffset4ValueThe data value used for comparison on the offset1 field as
specified by bridgeUdfOffset4Offset in the packet.rw INTEGER .1.3.6.1.4.1.139.2.4.11.1.27 |
bridgeUdfOffset4MaskThe value used to mask off the data value used for comparison
on the offset4 field in the packet. Don't care bits are zero.rw INTEGER .1.3.6.1.4.1.139.2.4.11.1.28 |
bridgeUdfOffset4OperandThe operand used in the comparison of the bridgeUdfOffset4Value
and the type field in the packet.rw Enumeration .1.3.6.1.4.1.139.2.4.11.1.29 |
bridgeUdfInitCountTableA table used to clear all of a port's bridgeUdfMatchCounts. SEQUENCE OF BridgeUdfInitCountEntry .1.3.6.1.4.1.139.2.4.12 |
bridgeUdfInitCountEntryA table entry used to clear all of a port's bridgeUdfMatchCounts. BridgeUdfInitCountEntry .1.3.6.1.4.1.139.2.4.12.1 |
bridgeUdfCountPortIndexThe port number on the board. Same as ifIndex.ro INTEGER .1.3.6.1.4.1.139.2.4.12.1.1 |
bridgeUdfCountInitMatchCountWhen read this object always returns 1. When set to any value
it will clear all of the bridgeUdfMatchCounts objects for this
port.rw INTEGER .1.3.6.1.4.1.139.2.4.12.1.2 |
bridgePortGroupEnableEnables and disables all Port Group filtering for the node.rw Enumeration .1.3.6.1.4.1.139.2.4.13 |
bridgePortGroupTableA table containing the port group information on each port and
group in the node. SEQUENCE OF BridgePortGroupEntry .1.3.6.1.4.1.139.2.4.14 |
bridgePortGroupEntryPort group information maintained on a single port and group. BridgePortGroupEntry .1.3.6.1.4.1.139.2.4.14.1 |
bridgePortGroupTablePortIndexThe port number in the node.ro INTEGER .1.3.6.1.4.1.139.2.4.14.1.1 |
bridgePortGroupTableGroupIndexThe group number in the node.ro INTEGER .1.3.6.1.4.1.139.2.4.14.1.2 |
bridgePortGroupTableEnableThis object indicates the status of this entry.
enable(1) - This port is currently contained in this group.
disable(2) - This port is not currently contained in this group.rw Enumeration .1.3.6.1.4.1.139.2.4.14.1.3 |
bridgePortGroupPortTableA table containing the port group information as readable strings
on each port on the board. SEQUENCE OF BridgePortGroupPortEntry .1.3.6.1.4.1.139.2.4.15 |
bridgePortGroupPortEntryPort group information maintained on a single port. BridgePortGroupPortEntry .1.3.6.1.4.1.139.2.4.15.1 |
bridgePortGroupPortIndexThe port number on the board. Same as ifIndex.ro INTEGER .1.3.6.1.4.1.139.2.4.15.1.1 |
bridgePortGroupPortDisplayStringA readable string that contains all of the port groups that
this port is a member of.ro DisplayString .1.3.6.1.4.1.139.2.4.15.1.2 |
bridgePortGroupGroupTableA table maintaining the port group information for each group
on the node. SEQUENCE OF BridgePortGroupGroupEntry .1.3.6.1.4.1.139.2.4.16 |
bridgePortGroupGroupEntryPort group information maintained on a single port group. BridgePortGroupGroupEntry .1.3.6.1.4.1.139.2.4.16.1 |
bridgePortGroupGroupIndexThe group number on the node.ro INTEGER .1.3.6.1.4.1.139.2.4.16.1.1 |
bridgePortGroupGroupPortMapThe set of ports which are members of this group. Packets can
only be forwarded to ports in the same port group(s) as the port
on which the packet was received. A port can be in multiple port
groups. Each octet within the value of this object specifies a set
of eight ports, with the first octet specifying ports 1 through
8 on board 1, the second octet specifying ports 1 through 8 on
board 2, etc. Within each octet the most significant bit represents
the lowest numbered port, and the least significant bit represents
the highest numbered port. Thus, each port of the bridge is
represented by a single bit within the value of this object. If
that bit has a value of '1' then that port is included in the set
of ports; the port is not included if its bit has a value of '0'.rw OCTET STRING .1.3.6.1.4.1.139.2.4.16.1.2 |
bridgePortGroupGroupCommentA readable string that contains all of the port groups that
this port is a member of.ro DisplayString .1.3.6.1.4.1.139.2.4.16.1.3 |
bridgeAddrFilterTableA table that contains information about MAC addresses for
which the node has forwarding and/or filtering information.
This information is used by the transparent bridging function
in determining how to propagate a received frame. SEQUENCE OF BridgeAddrFilterEntry .1.3.6.1.4.1.139.2.4.17 |
bridgeAddrFilterEntryAddress filtering information maintained on a block of 100
entries in the node's filtering database. BridgeAddrFilterEntry .1.3.6.1.4.1.139.2.4.17.1 |
bridgeAddrFilterBlockIndexBlock number for this entry. Each block holds information on 100
entry locations into the node's address filtering database.ro INTEGER .1.3.6.1.4.1.139.2.4.17.1.1 |
bridgeAddrFilterBlockDataThere will be 100 address entries returned. Each address entry
contains the following data:
ENTRY NUMBER: 2 octets - The physical entry into the node's
address filtering database for this
address.
MAC ADDRESS: 6 octets - The MAC address for this entry.
ENTRY TYPE: 1 octet - The type of entry can be one of the
following:
invalid(1) : this entry is not valid.
learned(2) : the value of the PORT
and SLOT was learned,
and is being used.
static(3) : the address is in the
dot1dStaticTable with
the instance of the
MAC address.
restrict(4) : the address is in the
restrictedTable with
the instance of the
MAC address.
spantree(5) : the address is the
spanning tree group
address.
self(6) : The address is one of
the bridge's addresses.
The SLOT indicates which
of the node's boards has
this address.
SLOT: 1 octet - If 'learned' the slot number of the board
on which a frame having a source address
equal to the value of the MAC address has
been seen. If 'self' the slot number of
the board with that MAC address. Else
a value of '0' indicating that the bridge
does have some forwarding/filtering
information about this MAC address (e.g.
in the dot1dStaticTable).
PORT: 1 octet - If 'learned' the port number of the port
on which a frame having a source address
equal to the value of the MAC address has
been seen. Else a value of '0' indicating
that the bridge does have some forwarding/
filtering information about this MAC
address (e.g. in the dot1dStaticTable).
AGE: 1 octet - If 'learned' the value of the AGE flag:
invalid(1) : not valid for this entry.
notaged(2) : the MAC address has not
been aged.
onceaged(3) : The MAC address has been
aged once. It will be
removed from the database
the next time the aging
process executes unless
a packet with the MAC
address in the source
address field is received.ro Opaque .1.3.6.1.4.1.139.2.4.17.1.2 |
bridgedot1dTpFdbTableA table that contains information about MAC addresses for which
the bridge has forwarding and/or filtering information. This
information is used by the transparent bridging function in
determining how to propagate a received frame. This table is an
extension of the dot1dTpFdbTable. SEQUENCE OF Bridgedot1dTpFdbEntry .1.3.6.1.4.1.139.2.4.18 |
bridgedot1dTpFdbEntryInformation about a specific MAC address for which the bridge
has some forwarding and/or filtering information. Bridgedot1dTpFdbEntry .1.3.6.1.4.1.139.2.4.18.1 |
bridgedot1dTpFdbAddressA MAC address for which the bridge has some forwarding and/or
filtering information. Same as dot1dTpFdbAddress.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.139.2.4.18.1.1 |
bridgedot1dTpFdbSlotIf bridgeDot1dTpFdbStatus is 'learned' then the slot number of the
board on which a frame having a source address equal to the value
of the MAC address has been seen. If 'self' the slot number of the
board with that MAC address. Else a value of '0' indicating that
the bridge does have some forwarding/filtering information about
this MAC address (e.g. in the dot1dStaticTable).ro INTEGER .1.3.6.1.4.1.139.2.4.18.1.2 |
bridgedot1dTpFdbPortIf bridgeDot1dTpFdbStatus is 'learned' then the port number of the
port on which a frame having a source address equal to the value
of the MAC address has been seen. Else a value of '0' indicating that
the bridge does have some forwarding/filtering information about
this MAC address (e.g. in the dot1dStaticTable).ro INTEGER .1.3.6.1.4.1.139.2.4.18.1.3 |
bridgedot1dTpFdbStatusThe type of entry can be one of the following:
invalid(1) : This entry is not valid.
learned(2) : The value of the PORT and SLOT was learned,
and is being used.
static(3) : The address is in the dot1dStaticTable with
the instance of the MAC address.
restrict(4) : The address is in the restrictedTable with
the instance of the MAC address.
spantree(5) : The address is the spanning tree group address.
self(6) : The address is one of the bridge's addresses.
The port indicates which of the node's boards
has this address.ro Enumeration .1.3.6.1.4.1.139.2.4.18.1.4 |
bridgedot1dTpFdbAgeIf the bridgedot1dTpFdbStatus is 'learned' then the value of the
AGE flag is:
invalid(1) : Not valid for this entry.
notaged(2) : The MAC address has not been aged.
onceaged(3) : The MAC address has been aged once. It will be
removed from the database the next time the
aging process executes unless a packet with
the MAC address in the source address field
is received.ro Enumeration .1.3.6.1.4.1.139.2.4.18.1.5 |
systemManagement OBJECT IDENTIFIER .1.3.6.1.4.1.139.2.5 |
smConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.139.2.5.1 |
smCfgManufactureDateThe manufacture date of this System Management board.ro DisplayString .1.3.6.1.4.1.139.2.5.1.1 |
smCfgTypeThe type of board.ro Enumeration .1.3.6.1.4.1.139.2.5.1.2 |
smCfgHardwareRevThe hardware revision number of this System Management board.ro DisplayString .1.3.6.1.4.1.139.2.5.1.3 |
smCfgSerialNumberThe serial number of this System Management board.ro DisplayString .1.3.6.1.4.1.139.2.5.1.4 |
smCfgMacAddrThe physical address of this System Management board.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.139.2.5.1.5 |
smCfgFlashMemSizeNumber of bytes of flash memory on this System
Management board.ro INTEGER .1.3.6.1.4.1.139.2.5.1.6 |
smCfg68kRamSizeManagement software RAM size on this System Management board.ro INTEGER .1.3.6.1.4.1.139.2.5.1.7 |
smCfgBootRevRevision number and date of the boot software on this
System Management board.ro DisplayString .1.3.6.1.4.1.139.2.5.1.8 |
smCfg68kRevRevision number and date of the management software on
this System Management board.ro DisplayString .1.3.6.1.4.1.139.2.5.1.9 |
smCfgModulePartNumberThe Artel part number for this System Management module.ro DisplayString .1.3.6.1.4.1.139.2.5.1.10 |
smCfgModuleSerialNumberThe Artel serial number for this System Management module.ro DisplayString .1.3.6.1.4.1.139.2.5.1.11 |
smCfgStoreFlashRevThe version number of the software loaded in the store flash
memory bank on this System Management board.ro DisplayString .1.3.6.1.4.1.139.2.5.1.12 |
smCfgExecFlashRevThe version number of the software loaded in the
executable flash memory bank on this System Management board.ro DisplayString .1.3.6.1.4.1.139.2.5.1.13 |
smBackplane OBJECT IDENTIFIER .1.3.6.1.4.1.139.2.5.2 |
smBpTypeThe type of Galactica 1 gigabit GBus on this node.ro Enumeration .1.3.6.1.4.1.139.2.5.2.1 |
smBpArbTimerThe timeout period used to switch from asyncronous
packets to syncronous packets.ro INTEGER .1.3.6.1.4.1.139.2.5.2.2 |
smBpMaxPktSizeThe maximum packet size transmitted over the node's
Galactica 1 gigabit GBus.ro INTEGER .1.3.6.1.4.1.139.2.5.2.3 |
smBpAsyncSlotsEnbA bit string returned as an integer that indicates which
boards are asynchronous. The least significant bit
represents the board in slot 0.ro INTEGER .1.3.6.1.4.1.139.2.5.2.4 |
smBpSyncSlotsEnbA bit string returned as an integer that indicates which
boards are synchronous. The least significant bit
represents the board in slot 0.ro INTEGER .1.3.6.1.4.1.139.2.5.2.5 |
smBpUtilizationThe current percentage of Galactica 1 gigabit GBus
utilization.ro INTEGER .1.3.6.1.4.1.139.2.5.2.6 |
smBpTableA table maintaining state information on each board in
the node. SEQUENCE OF SmBpEntry .1.3.6.1.4.1.139.2.5.2.7 |
smBpEntryInformation maintained on a single board. SmBpEntry .1.3.6.1.4.1.139.2.5.2.7.1 |
smBpIndexThe slot number of the board.ro INTEGER .1.3.6.1.4.1.139.2.5.2.7.1.1 |
smBpTableEnableThe current operational state of the board as viewed by
the System Management board.ro Enumeration .1.3.6.1.4.1.139.2.5.2.7.1.2 |
smBpTableJabberTrue indicates that the board transmitted a packet that
was larger than the maximum packet size and was disabled
from the Galactica 1 gigabit GBus by the System
Management board. This state will not be automatically
re-set. The board cannot be re-enabled until manual
intervention is taken by setting the smBpTableClearJabber
object as defined below.ro Enumeration .1.3.6.1.4.1.139.2.5.2.7.1.3 |
smBpTableClearJabberWhen read this object always returns 1. When set to any
value, the System Manager will clear the smBpTableJabber
object allowing the board to be re-enabled onto the
Galactica 1 gigabit GBus.rw INTEGER .1.3.6.1.4.1.139.2.5.2.7.1.4 |
smPowerSupply OBJECT IDENTIFIER .1.3.6.1.4.1.139.2.5.4 |
smSupplyPresentA bit string returned as an integer that represents the
presence of the power supplies. The lease significant
bit represents power supply 1 which the leftmost power supply.ro INTEGER .1.3.6.1.4.1.139.2.5.4.1 |
smSupplyTypeA bit string returned as an integer that indicates the
type of power supply present. Two bits are assigned to
each power supply with the 2 least significant bits
representing power supply 1. The bits are encoded such
that:
00 invalid
01 No supply present
10 DC supply
11 AC supplyro INTEGER .1.3.6.1.4.1.139.2.5.4.2 |
smSupplyAcOkA bit string returned as an integer that indicates the
status of the AC power units. The least significant bit
represents power supply 1.ro INTEGER .1.3.6.1.4.1.139.2.5.4.3 |
smSupplyDcOkA bit string returned as an integer that indicates the
status of the DC power units. The least significant bit
represents power supply 1.ro INTEGER .1.3.6.1.4.1.139.2.5.4.4 |
smSupplyTableA table of strings describing the status of the chassis power
supplies. SEQUENCE OF SmSupplyTableEntry .1.3.6.1.4.1.139.2.5.4.5 |
smSupplyTableEntryThe status of one power supply in the chassis. SmSupplyTableEntry .1.3.6.1.4.1.139.2.5.4.5.1 |
smSupplyTableIndexThe number of the power supply in the chassis, numbered from
left to right.ro INTEGER .1.3.6.1.4.1.139.2.5.4.5.1.1 |
smSupplyTableStatusA text description of the status of the power supply.
One of: 'NOT PRESENT', 'OFF', 'ON' or 'FAILURE'.ro DisplayString .1.3.6.1.4.1.139.2.5.4.5.1.2 |
smModem OBJECT IDENTIFIER .1.3.6.1.4.1.139.2.5.5 |
smModemTypeThe modem type present on the node's System Management board.ro Enumeration .1.3.6.1.4.1.139.2.5.5.1 |
smModemCallBackEnableEnables and disables the call-back feature of the modem.
If enabled the modem will answer a call, then hang up and dial
the number in smModemCallBackNumber. If disabled the modem
will not hang up on any calls.rw Enumeration .1.3.6.1.4.1.139.2.5.5.2 |
smModemCallBackNumberA Hayes style dial string that the internal modem uses if
call-back is enabled. The string should not contain the 'ATD'
characters, but a leading 'P' may be used to initiate pulse
dialing if needed.rw DisplayString .1.3.6.1.4.1.139.2.5.5.3 |
starbridge OBJECT IDENTIFIER .1.3.6.1.4.1.139.2.6 |
sbConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.139.2.6.1 |
sbCfgManufactureDateThe manufacture date of this Starbridge board.ro DisplayString .1.3.6.1.4.1.139.2.6.1.1 |
sbCfgTypeThe type of boardro Enumeration .1.3.6.1.4.1.139.2.6.1.2 |
sbCfgHardwareRevThe hardware revision number of this Starbridge board.ro DisplayString .1.3.6.1.4.1.139.2.6.1.3 |
sbCfgSerialNumberThe serial number of this Starbridge board.ro DisplayString .1.3.6.1.4.1.139.2.6.1.4 |
sbCfgNumberIfBoardsThe number of interface cards on this module.ro INTEGER .1.3.6.1.4.1.139.2.6.1.5 |
sbCfgIfBd1TypeThe interface type of interface card 1.ro Enumeration .1.3.6.1.4.1.139.2.6.1.6 |
sbCfgIfBd1RevThe hardware revision number of interface card 1.ro DisplayString .1.3.6.1.4.1.139.2.6.1.7 |
sbCfgIfBd1SerialNumThe serial number of interface card 1.ro DisplayString .1.3.6.1.4.1.139.2.6.1.8 |
sbCfgIfBd1NumPortsThe number of ports contained on interface card 1.ro INTEGER .1.3.6.1.4.1.139.2.6.1.9 |
sbCfgIfBd2TypeThe interface type of interface card 2.ro Enumeration .1.3.6.1.4.1.139.2.6.1.10 |
sbCfgIfBd2RevThe hardware revision number of interface card 2.ro DisplayString .1.3.6.1.4.1.139.2.6.1.11 |
sbCfgIfBd2SerialNumThe serial number of interface card 2.ro DisplayString .1.3.6.1.4.1.139.2.6.1.12 |
sbCfgIfBd2NumPortsThe number of ports contained on interface card 2.ro INTEGER .1.3.6.1.4.1.139.2.6.1.13 |
sbCfgFlashMemorySizeNumber of bytes of flash memory on this Starbridge board.ro INTEGER .1.3.6.1.4.1.139.2.6.1.14 |
sbCfg68kRamSizeManagement software RAM size on this Starbridge board.ro INTEGER .1.3.6.1.4.1.139.2.6.1.15 |
sbCfg960RamSizePacket switch software RAM size on this Starbridge board.ro INTEGER .1.3.6.1.4.1.139.2.6.1.16 |
sbCfgSonicRamSizeSize of the RAM used by the Ethernet Controllers (Sonic)
for packet processing..ro INTEGER .1.3.6.1.4.1.139.2.6.1.17 |
sbCfgHasherCacheTagSizeThe number of bytes in the hasher cache on this
Starbridge board. Each address used 6 bytes.ro INTEGER .1.3.6.1.4.1.139.2.6.1.18 |
sbCfgDualPortRamSizeThe size of the dual port RAM used by the Galactica
1 gigabit GBus on this Starbridge board.ro INTEGER .1.3.6.1.4.1.139.2.6.1.19 |
sbCfgBootRevRevision number and date of the boot software on this
Starbridge board.ro DisplayString .1.3.6.1.4.1.139.2.6.1.20 |
sbCfg68kRevRevision number and date of the management boot ROM
software on this Starbridge board.ro DisplayString .1.3.6.1.4.1.139.2.6.1.21 |
sbCfg960RevRevision number and date of the packet switch software
on this Starbridge board.ro DisplayString .1.3.6.1.4.1.139.2.6.1.22 |
sbCfgModulePartNumberThe Artel part number for this Starbridge module.ro DisplayString .1.3.6.1.4.1.139.2.6.1.23 |
sbCfgModuleSerialNumberThe Artel serial number for this Starbridge module.ro DisplayString .1.3.6.1.4.1.139.2.6.1.24 |
sbCfgStoreFlashRevThe version number of the software loaded in the store
flash memory bank on this Starbridge board.ro DisplayString .1.3.6.1.4.1.139.2.6.1.25 |
sbCfgExecFlashRevThe version number of the software loaded in the
executable flash memory bank on this Starbridge board.ro DisplayString .1.3.6.1.4.1.139.2.6.1.26 |
sbPort OBJECT IDENTIFIER .1.3.6.1.4.1.139.2.6.3 |
sbPortTableStatistics maintained for the ports on a Starbridge board. SEQUENCE OF SbPortEntry .1.3.6.1.4.1.139.2.6.3.1 |
sbPortEntryThe statics for a particular port on the Starbridge board. SbPortEntry .1.3.6.1.4.1.139.2.6.3.1.1 |
sbPortIndexThe port number associated with this port. Always the
same as ifIndex.ro INTEGER .1.3.6.1.4.1.139.2.6.3.1.1.1 |
sbPortRxMulticastFramesThe number of multicast frames received on this port.ro Counter .1.3.6.1.4.1.139.2.6.3.1.1.2 |
sbPortRxBroadcastFramesThe number of broadcast frames received on this port.ro Counter .1.3.6.1.4.1.139.2.6.3.1.1.3 |
sbPortRxRuntErrorsThe number of packets received that were smaller than
the minimum size packet defined for this port.ro Counter .1.3.6.1.4.1.139.2.6.3.1.1.5 |
sbPortRxBytesThe total number of bytes received on this port.ro Counter .1.3.6.1.4.1.139.2.6.3.1.1.6 |
sbPortTxBytesThe total number of bytes transmitted on this port.ro Counter .1.3.6.1.4.1.139.2.6.3.1.1.7 |
sbPortRxBroadcastStatusAdministratively enables and disables the receipt of
broadcasts on this port.rw Enumeration .1.3.6.1.4.1.139.2.6.3.1.1.8 |
sbPortNameAdministratively assigned name for this port.rw DisplayString .1.3.6.1.4.1.139.2.6.3.1.1.9 |
sbPortUtilizationPort usage over the past ten seconds, expressed as a percentage.ro Gauge .1.3.6.1.4.1.139.2.6.3.1.1.10 |
sbPortFramesPerSecondThe number of data frames per second seen by the port.ro Gauge .1.3.6.1.4.1.139.2.6.3.1.1.11 |
sbPortErrorRatePort errors over the past ten seconds, expressed as a percentage.ro Gauge .1.3.6.1.4.1.139.2.6.3.1.1.12 |
sbPortInitStatsThis object always returns 1. Setting this object to any value
causes the port statistics to be cleared.rw INTEGER .1.3.6.1.4.1.139.2.6.3.1.1.13 |
sbPortUnidirectTableTable that supports the Artel uni-direct option. SEQUENCE OF SbPortUnidirectEntry .1.3.6.1.4.1.139.2.6.3.2 |
sbPortUnidirectEntryThe information needed for one uni-direct connection. SbPortUnidirectEntry .1.3.6.1.4.1.139.2.6.3.2.1 |
sbPortUnidirectIndexThe index number assigned to this uni-direct channel. A
unidirect channel consists of 2 ports.
Channel 1 consists of port 1 and port 2
Channel 2 consists of port 3 and port 4
Channel 3 consists of port 5 and port 6
Channel 4 consists of port 7 and port 8
The odd numbered port is alwasy the receive port and the
even numbered port is always the transmit port.ro INTEGER .1.3.6.1.4.1.139.2.6.3.2.1.1 |
sbPortUnidirectEnableAdministratively enables and disables uni-direct.rw Enumeration .1.3.6.1.4.1.139.2.6.3.2.1.2 |
fddi OBJECT IDENTIFIER .1.3.6.1.4.1.139.2.7 |
fddiConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.139.2.7.1 |
fddiCfgManufactureDateThe manufacture date of this FDDI board.ro DisplayString .1.3.6.1.4.1.139.2.7.1.1 |
fddiCfgTypeThe type of board.ro Enumeration .1.3.6.1.4.1.139.2.7.1.2 |
fddiCfgHardwareRevThe hardware revision number of this FDDI board.ro DisplayString .1.3.6.1.4.1.139.2.7.1.3 |
fddiCfgSerialNumberThe serial number of this FDDI board.ro DisplayString .1.3.6.1.4.1.139.2.7.1.4 |
fddiCfgNumberFddiPortsThe number of ports on this module.ro INTEGER .1.3.6.1.4.1.139.2.7.1.5 |
fddiCfgPPFTypeA string describing the type of the FDDI chip set module.ro DisplayString .1.3.6.1.4.1.139.2.7.1.6 |
fddiCfgPPFRevThe hardware revision and date of the FDDI chip set module.ro DisplayString .1.3.6.1.4.1.139.2.7.1.7 |
fddiCfgPPFSerialNumberThe serial number of the FDDI chip set module.ro DisplayString .1.3.6.1.4.1.139.2.7.1.8 |
fddiCfgMediaTypeA string describing the media type of the FDDI board. For
example Multi-mode fiber or Twisted Pair.ro DisplayString .1.3.6.1.4.1.139.2.7.1.9 |
fddiCfgFlashMemorySizeNumber of bytes of flash memory on this FDDI board.ro INTEGER .1.3.6.1.4.1.139.2.7.1.10 |
fddiCfg68kRamSizeManagement software RAM size on this FDDI board.ro INTEGER .1.3.6.1.4.1.139.2.7.1.11 |
fddiCfg960RamSizePacket switch software RAM size on this FDDI board.ro INTEGER .1.3.6.1.4.1.139.2.7.1.12 |
fddiCfgSonicRamSizeSize of the RAM used by the Ethernet Controllers (Sonic)
for packet processing..ro INTEGER .1.3.6.1.4.1.139.2.7.1.13 |
fddiCfgHasherCacheTagSizeThe number of bytes in the hasher cache on this
FDDI board. Each address used 6 bytes.ro INTEGER .1.3.6.1.4.1.139.2.7.1.14 |
fddiCfgDualPortRamSizeThe size of the dual port RAM used by the Galactica
1 gigabit GBus on this FDDI board.ro INTEGER .1.3.6.1.4.1.139.2.7.1.15 |
fddiCfgBootRevRevision number and date of the boot software on this
FDDI board.ro DisplayString .1.3.6.1.4.1.139.2.7.1.16 |
fddiCfg68kRevRevision number and date of the management boot ROM
software on this FDDI board.ro DisplayString .1.3.6.1.4.1.139.2.7.1.17 |
fddiCfg960RevRevision number and date of the packet switch software
on this FDDI board.ro DisplayString .1.3.6.1.4.1.139.2.7.1.18 |
fddiCfgPPFSoftwareRevRevision number and date of the FDDI chip set module.ro DisplayString .1.3.6.1.4.1.139.2.7.1.19 |
fddiCfgModulePartNumberThe Artel part number for this FDDI module.ro DisplayString .1.3.6.1.4.1.139.2.7.1.20 |
fddiCfgModuleSerialNumberThe Artel serial number for this FDDI module.ro DisplayString .1.3.6.1.4.1.139.2.7.1.24 |
fddiCfgStoreFlashRevThe version number of the software loaded in the store
flash memory bank on this FDDI board.ro DisplayString .1.3.6.1.4.1.139.2.7.1.25 |
fddiCfgExecFlashRevThe version number of the software loaded in the
executable flash memory bank on this FDDI board.ro DisplayString .1.3.6.1.4.1.139.2.7.1.26 |
fddiIpFragmentation OBJECT IDENTIFIER .1.3.6.1.4.1.139.2.7.2 |
fddiIpFragEnabledEnables and disables IP fragmentation for the FDDI board.rw Enumeration .1.3.6.1.4.1.139.2.7.2.1 |
fddiPort OBJECT IDENTIFIER .1.3.6.1.4.1.139.2.7.3 |
fddiPortTableStatistics maintained for the ports on a FDDI board. SEQUENCE OF FddiPortEntry .1.3.6.1.4.1.139.2.7.3.1 |
fddiPortEntryThe statics for a particular port on the FDDI board. FddiPortEntry .1.3.6.1.4.1.139.2.7.3.1.1 |
fddiPortIndexThe port number associated with this port. Always the
same as ifIndex.ro INTEGER .1.3.6.1.4.1.139.2.7.3.1.1.1 |
fddiPortRxMcastEnabledEnables and disables the reception of multicast frames on this
port.ro Enumeration .1.3.6.1.4.1.139.2.7.3.1.1.2 |
fddiPortNotCopiedOffRingErrsEquivalent to the ANSI FDDI attribute fddiMACNotCopied-Ct.
The count of frames that should have been copied off the
ring but were not. It is not required that the count be exact.ro Counter .1.3.6.1.4.1.139.2.7.3.1.1.3 |
fddiPortRingOpCountsEquivalent to the ANSI FDDI attribute fddiMACRingOp-Ct.
The count of the number of times the ring has entered the
'Ring Operational' state from the 'Ring Not Operational' state.
It is not required that this count be exact.ro Counter .1.3.6.1.4.1.139.2.7.3.1.1.4 |
fddiPortFrameCheckErrsThe count of frames copied off the ring which had a bad FCS
(Frame Check Sequence).ro Counter .1.3.6.1.4.1.139.2.7.3.1.1.5 |
artelTrap OBJECT IDENTIFIER .1.3.6.1.4.1.139.64 |
artelTrapAddrTableA table of management systems ready to accept traps
generated by this node. SEQUENCE OF ArtelTrapAddrEntry .1.3.6.1.4.1.139.64.1 |
artelTrapAddrEntryInformation needed to deliver traps to a particular
management station. ArtelTrapAddrEntry .1.3.6.1.4.1.139.64.1.1 |
artelTrapAddrIpDestThe IP address of the management agent receiving traps.rw IpAddress .1.3.6.1.4.1.139.64.1.1.1 |
artelTrapAddrXPortIndexThis is the UDP address defined as an OCTET STRING of 2
bytes for the purpose of using it as an instance whoses
sub-id lengths cannot exceed one byte in length.ro OCTET STRING .1.3.6.1.4.1.139.64.1.1.2 |
artelTrapAddrUdpDestThe UDP port number used by the management station to
receive traps.rw INTEGER .1.3.6.1.4.1.139.64.1.1.3 |
artelTrapAddrCommunityThe community name expected by the management station
receiving traps.rw OCTET STRING .1.3.6.1.4.1.139.64.1.1.4 |
artelTrapAddrStatusPermanent entries will be kept in non-volatile
ram until the user specifically invalidates the entry.
Temporary entries will be timed out after a minimum 10
minute interval.
Invalid entries will be removed from the table.rw Enumeration .1.3.6.1.4.1.139.64.1.1.5 |
artelTrapReportStringWhen read this will always return a NULL string. It
will be returned in varBindList of Artel proprietary
traps to provide the user with any additional information
available to the agent.ro DisplayString .1.3.6.1.4.1.139.64.2 |