COLUBRIS-TOOLS-MIB
AI MIB Summary
The COLUBRIS-TOOLS-MIB provides management access to Colubris Networks wireless access points and gateways, exposing operational metrics such as radio interface status, client association counts, signal strength, and system resource utilization. This module enables the monitoring of wireless network performance and device health through standard SNMP polling of vendor-specific object identifiers.
Colubris Networks Tools MIB module.
Main OID:
colubrisToolsMIB.1.3.6.1.4.1.8744.5.12
21
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
21 total| Object Name |
|---|
colubrisToolsMIBColubris Networks Tools MIB module. MODULE-IDENTITY .1.3.6.1.4.1.8744.5.12 |
colubrisToolsMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.8744.5.12.1 |
traceToolConfig OBJECT IDENTIFIER .1.3.6.1.4.1.8744.5.12.1.1 |
traceInterfaceSpecifies the interface to apply the trace to.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.8744.5.12.1.1.1 |
traceCaptureDestinationSpecifies if the traces shall be stored locally on the device or remotely on a distant system. 'local': Stores the traces locally on the device. 'remote': Stores the traces in a remote file specified by traceCaptureDestinationURL.rw Enumeration .1.3.6.1.4.1.8744.5.12.1.1.2 |
traceCaptureDestinationURLSpecifies the URL of the file to which trace data will be sent. If a valid URL is not defined, the trace data cannot be sent and will be discarded.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8744.5.12.1.1.3 |
traceTimeoutSpecifies the amount of time the trace will capture data. Once this limit is reached, the trace automatically stops.rw Unsigned32 .1.3.6.1.4.1.8744.5.12.1.1.4 |
traceNumberOfPacketsSpecifies the maximum number of packets (IP datagrams) the trace should capture. Once this limit is reached, the trace automatically stops.rw Unsigned32 .1.3.6.1.4.1.8744.5.12.1.1.5 |
tracePacketSizeSpecifies the maximum number of bytes to capture for each packet. The remaining data is discarded.rw Unsigned32 .1.3.6.1.4.1.8744.5.12.1.1.6 |
traceCaptureFilterSpecifies the packet filter to use to capture data. The filter expression has the same format and behavior as the expression parameter used by the well-known TCPDUMP command.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8744.5.12.1.1.7 |
traceCaptureStatusIP Trace tool action trigger. 'stop': Stops the trace tool from functioning. If any capture was previously started it will end up. if no capture was started, 'stop' has no effect. 'start': Starts to capture the packets following the criteria specified in the management tool and in this MIB.rw Enumeration .1.3.6.1.4.1.8744.5.12.1.1.8 |
traceNotificationEnabledSpecifies if IP trace notifications are generated.rw ColubrisNotificationEnable (COLUBRIS-TC) .1.3.6.1.4.1.8744.5.12.1.1.9 |
colubrisToolsMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.8744.5.12.2 |
colubrisToolsMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.8744.5.12.2.0 |
traceStatusNotificationSent when the user triggers the IP Trace tool either by starting a new trace or stopping an existing session. NOTIFICATION-TYPE .1.3.6.1.4.1.8744.5.12.2.0.1 |
colubrisToolsMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.8744.5.12.3 |
colubrisToolsMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.8744.5.12.3.1 |
colubrisToolsMIBComplianceThe compliance statement for entities which implement the Colubris Networks Tools MIB. Unknown .1.3.6.1.4.1.8744.5.12.3.1.1 |
colubrisToolsMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.8744.5.12.3.2 |
colubrisToolsMIBGroupA collection of objects providing the Tools MIB capability. Unknown .1.3.6.1.4.1.8744.5.12.3.2.1 |
colubrisToolsNotificationGroupA collection of supported notifications. Unknown .1.3.6.1.4.1.8744.5.12.3.2.2 |