Home/Catalog/CNTAU-MIB

CNTAU-MIB

AI MIB Summary

Standard SNMP MIB module defining data structures for CNTAU-MIB.

447
Objects
Active
Status
5
Dependencies

Imported Objects

Objects

447 total
Object Name
cnt
OBJECT IDENTIFIER
.1.3.6.1.4.1.333
RFC1065-SMI
Unknown
.1.3.6.1.4.1.333
cntau
OBJECT IDENTIFIER
.1.3.6.1.4.1.333.1
cntInformationalMsgA cnt level one trap signifies that an event has occured that is informational in severity. The network will not be affected by this error.
TRAP-TYPE
.1.3.6.1.4.1.333.1.0.1
cntPossibleErrMsgA cnt level two trap signifies that an event has occured that is possibly severe in nature. The scope of this failure is dependent on the network design.
TRAP-TYPE
.1.3.6.1.4.1.333.1.0.2
cntSevereErrMsgA cnt level three trap signifies that an event has occured that is unrecoverable. Some aspect of the CNT network will not function as expected. Related aspects may also be affected.
TRAP-TYPE
.1.3.6.1.4.1.333.1.0.3
cntCriticalErrMsgA cnt level four trap signifies that an event has occured that is critical and possibly fatal. Some aspect of the cnt network will not function or is seriously impaired. This failure will likely affect related functions as well.
TRAP-TYPE
.1.3.6.1.4.1.333.1.0.4
cntsystem
OBJECT IDENTIFIER
.1.3.6.1.4.1.333.1.1
cntSysNodeAddressNode address of this CNT platform. This value contains the region (1 byte), the bus (1 byte), and the node (2 bytes).ro
IpAddress
.1.3.6.1.4.1.333.1.1.1
cntSysTimeofDayThe date and time from Battery-Backed-up RAM (BBRAM).ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.1.2
cntSysMsgTableList of entries in the global mail box. This mail box contains any message that have been entered by any software residing in the node.
SEQUENCE OF CntMsgEntry
.1.3.6.1.4.1.333.1.1.3
cntMsgEntryA mail box entry.
CntMsgEntry
.1.3.6.1.4.1.333.1.1.3.1
cntMsgIndexThe relative index of this mail box message.ro
INTEGER
.1.3.6.1.4.1.333.1.1.3.1.1
cntMsgSeverityThe severity of this mail box message.ro
Enumeration
.1.3.6.1.4.1.333.1.1.3.1.2
cntMsgTaskNameThe name of the module that sent this message to the mail box.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.1.3.1.3
cntMsgNumberThe number of this message. Each module numbers its message type as another way of describing it. This message can then be cross-referenced in the CNT system messages reference manual.ro
INTEGER
.1.3.6.1.4.1.333.1.1.3.1.4
cntMsgCpuNumberThe CPU of the module that sent this message to the mail box.ro
Enumeration
.1.3.6.1.4.1.333.1.1.3.1.5
cntMsgNodeNumberThe node number of the module that sent this message to the mail box.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.1.3.1.6
cntMsgDateTimeThe date and time that this message was sent to the mail box.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.1.3.1.7
cntMsgContentThe textual contents of the message sent to the mail box.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.1.3.1.8
cntMsgSeqNumberThe sequence number for this message.ro
INTEGER
.1.3.6.1.4.1.333.1.1.3.1.9
cntSysHardware
OBJECT IDENTIFIER
.1.3.6.1.4.1.333.1.1.4
cntHwBBramTypeThe type of battery backed up memory.ro
Enumeration
.1.3.6.1.4.1.333.1.1.4.1
cntHwBBramStatusThe status of the batteries used in the BBRAM. A failing status indicates that one or more of the batteries are failing.ro
Enumeration
.1.3.6.1.4.1.333.1.1.4.2
cntHwFailedCpuThe CPU number where a failure occurred. If this value is zero then there are no failures.ro
Enumeration
.1.3.6.1.4.1.333.1.1.4.3
cntHwMonCpuThe CPU number of the monitor that noticed the CPU failure.ro
Enumeration
.1.3.6.1.4.1.333.1.1.4.4
cntHwFailStatusStatus that the failing CPU recorded at the time of the failure.ro
Enumeration
.1.3.6.1.4.1.333.1.1.4.5
cntHwMonFailStatusStatus that the monitoring CPU recorded at the time of the failure.ro
Enumeration
.1.3.6.1.4.1.333.1.1.4.6
cntHwFailDateTime and date when the processor failed.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.1.4.7
cntHwReset1WhyThe reason for the last reset.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.1.4.8
cntHwReset1DateThe time and date of the last reset.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.1.4.9
cntHwReset2WhyThe reason for the second-to-last reset.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.1.4.10
cntHwReset2DateThe time and date of the second-to-last reset.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.1.4.11
cntHwReset3WhyThe reason for the third-to-last reset.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.1.4.12
cntHwReset3DateThe time and date of the third-to-last reset.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.1.4.13
cntHwPowerSupplyThe status of the power supply or power supplies. This value will indicate good only if all power supplies in the node are working. If any fan or power supply is failing, this object will indicate a failure even if enough power is supplied to keep the node operating.ro
Enumeration
.1.3.6.1.4.1.333.1.1.4.14
cntHwCpuTableA list of CPU statistics entries. All possible CPUs for a box are accessible whether or not they even exist.
SEQUENCE OF CntHwCpuEntry
.1.3.6.1.4.1.333.1.1.4.15
cntHwCpuEntryA CPU statistics entry.
CntHwCpuEntry
.1.3.6.1.4.1.333.1.1.4.15.1
cntCpuNumThe cpu index.ro
Enumeration
.1.3.6.1.4.1.333.1.1.4.15.1.1
cntCpuTypeThe type of the CPU requested.ro
Enumeration
.1.3.6.1.4.1.333.1.1.4.15.1.2
cntCpuSemCountThe number of semaphores for this CPU.ro
INTEGER
.1.3.6.1.4.1.333.1.1.4.15.1.3
cntCpuSemLostThe number of semaphores lost for this CPU.ro
INTEGER
.1.3.6.1.4.1.333.1.1.4.15.1.4
cntCpuStatusThe current known status of this CPU.ro
Enumeration
.1.3.6.1.4.1.333.1.1.4.15.1.5
cntCpuMonStatusThe current status of this CPU as known by the monitoring CPU.ro
Enumeration
.1.3.6.1.4.1.333.1.1.4.15.1.6
cntCpuPollStatusThe status of the current polling request for this CPU.ro
Enumeration
.1.3.6.1.4.1.333.1.1.4.15.1.7
cntCpuPollsThe number of polls sent for this CPU.ro
Counter
.1.3.6.1.4.1.333.1.1.4.15.1.8
cntCpuResetDelayTimeThe reset delay time, in seconds.ro
INTEGER
.1.3.6.1.4.1.333.1.1.4.15.1.9
cntCpuMonByThe system number for the CPU monitoring this CPU.ro
Enumeration
.1.3.6.1.4.1.333.1.1.4.15.1.10
cntCpuPortThe port number for this CPU.ro
INTEGER
.1.3.6.1.4.1.333.1.1.4.15.1.11
cntCpuUnclaimsThe number of unclaimed grant interrupts on the system controller CPU.ro
Counter
.1.3.6.1.4.1.333.1.1.4.15.1.12
cntCpuXtraIntsThe number of spurious interrupts.ro
Counter
.1.3.6.1.4.1.333.1.1.4.15.1.13
cntCpuLevel7sThe number of unidentified level seven interrupts.ro
Counter
.1.3.6.1.4.1.333.1.1.4.15.1.14
cntCpuMsgRetsThe number of undeliverable MDM interprocessor messages.ro
Counter
.1.3.6.1.4.1.333.1.1.4.15.1.15
cntCpuMsgHoldsThe number of messages held which were being returned to the failed processor.ro
Counter
.1.3.6.1.4.1.333.1.1.4.15.1.16
cntCpuResetFlagThe value of the reset flag.ro
Enumeration
.1.3.6.1.4.1.333.1.1.4.15.1.17
cntCpuUtilThe CPU utilization, in percent utilized.ro
INTEGER
.1.3.6.1.4.1.333.1.1.4.15.1.18
cntCpuLastFailDateThe date and time of the last failure.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.1.4.15.1.19
cntCpuLastChgDateThe date and time of the last change.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.1.4.15.1.20
cntHwStatusLEDTwo digit, LCD display. During system initialization it indicates the processor that is being initialized. Successful initialization is indicated by a display of '00'.ro
INTEGER
.1.3.6.1.4.1.333.1.1.4.16
cntSysBuild
OBJECT IDENTIFIER
.1.3.6.1.4.1.333.1.1.5
cntRevDateThe BBRAM revision date of the system description (!RV2) file.ro
IpAddress
.1.3.6.1.4.1.333.1.1.5.1
cntCustomerCustomer name and other identifying information.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.1.5.2
cntMachineTypeThe machine type of this node.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.1.5.3
cntSerialNumberThe machine serial number of this node.ro
INTEGER
.1.3.6.1.4.1.333.1.1.5.4
cntWorkOrderNumberThe original manufacturing build work order number of this node.ro
INTEGER
.1.3.6.1.4.1.333.1.1.5.5
cntChassisNumberThe machine chassis number of this node.ro
INTEGER
.1.3.6.1.4.1.333.1.1.5.6
cntModelNumberThe machine model number of this node.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.1.5.7
cntReleaseLevelThe original software release level installed in this node.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.1.5.8
cntRevEditDateThe date that this version of the system description (!RV2) file was edited dynamically.ro
IpAddress
.1.3.6.1.4.1.333.1.1.5.9
cntRevEditTimeThe time that this version of the system description (!RV2) file was edited dynamically.ro
IpAddress
.1.3.6.1.4.1.333.1.1.5.10
cntFeatureTableThe list of manufacturing features originally installed in this node.
SEQUENCE OF CntFeatureEntry
.1.3.6.1.4.1.333.1.1.5.11
cntFeatureEntryA node feature entry.
CntFeatureEntry
.1.3.6.1.4.1.333.1.1.5.11.1
cntFeatureIndexThe feature index.ro
INTEGER
.1.3.6.1.4.1.333.1.1.5.11.1.1
cntFeatureNameThe name of this feature.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.1.5.11.1.2
cntFeatureQuantityThe quantity of this feature.ro
INTEGER
.1.3.6.1.4.1.333.1.1.5.11.1.3
cntFeatureDescrA description of this feature.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.1.5.11.1.4
cntSlotTableThe list of VME slots in this node.
SEQUENCE OF CntSlotEntry
.1.3.6.1.4.1.333.1.1.5.12
cntSlotEntryA node slot entry.
CntSlotEntry
.1.3.6.1.4.1.333.1.1.5.12.1
cntSlotIndexThe slot index.ro
INTEGER
.1.3.6.1.4.1.333.1.1.5.12.1.1
cntSlotNameThe board name in this slot.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.1.5.12.1.2
cntSlotPartNumberThe part number for the board in this slot.ro
INTEGER
.1.3.6.1.4.1.333.1.1.5.12.1.3
cntSlotSerialNumberThe serial number for the board in this slot.ro
INTEGER
.1.3.6.1.4.1.333.1.1.5.12.1.4
cntSlotRevLevelThe revision number of the board in this slot.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.1.5.12.1.5
cntSlotInterfaceThe interface name of the board in this slot.ro
INTEGER
.1.3.6.1.4.1.333.1.1.5.12.1.6
cntSlotCpuNumberThe cpu number of the board in this slot.ro
Enumeration
.1.3.6.1.4.1.333.1.1.5.12.1.7
cntSlotVMEbusGrantThe VME bus grant priority of the board in this slot.ro
INTEGER
.1.3.6.1.4.1.333.1.1.5.12.1.8
cntIOTableThe list of VME I/O boards in this node.
SEQUENCE OF CntIOEntry
.1.3.6.1.4.1.333.1.1.5.13
cntIOEntryA node board entry.
CntIOEntry
.1.3.6.1.4.1.333.1.1.5.13.1
cntIOIndexThe I/O board index.ro
INTEGER
.1.3.6.1.4.1.333.1.1.5.13.1.1
cntIONameThe I/O board name.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.1.5.13.1.2
cntIOPartNumberThe part number for this I/O board.ro
INTEGER
.1.3.6.1.4.1.333.1.1.5.13.1.3
cntIOSerialNumberThe serial number for this I/O board.ro
INTEGER
.1.3.6.1.4.1.333.1.1.5.13.1.4
cntIORevLevelThe revision number of this I/O board.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.1.5.13.1.5
cntIOInterfaceThe interface name of this I/O board.ro
INTEGER
.1.3.6.1.4.1.333.1.1.5.13.1.6
cntIOCpuNumberThe cpu number of this I/O board.ro
Enumeration
.1.3.6.1.4.1.333.1.1.5.13.1.7
cntPowerTableThe list of power supplies in this node.
SEQUENCE OF CntPowerEntry
.1.3.6.1.4.1.333.1.1.5.14
cntPowerEntryA node power supply entry.
CntPowerEntry
.1.3.6.1.4.1.333.1.1.5.14.1
cntPowerIndexThe power supply index.ro
INTEGER
.1.3.6.1.4.1.333.1.1.5.14.1.1
cntPowerNameThe power supply name.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.1.5.14.1.2
cntPowerPartNumberThe part number for this power supply.ro
INTEGER
.1.3.6.1.4.1.333.1.1.5.14.1.3
cntPowerSerialNumberThe serial number for this power supply.ro
INTEGER
.1.3.6.1.4.1.333.1.1.5.14.1.4
cntPowerRevLevelThe revision number of this power supply.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.1.5.14.1.5
cntSCRTableThe list of SCRs in this node.
SEQUENCE OF CntSCREntry
.1.3.6.1.4.1.333.1.1.5.15
cntSCREntryA node SCR entry.
CntSCREntry
.1.3.6.1.4.1.333.1.1.5.15.1
cntSCRIndexThe SCR index.ro
INTEGER
.1.3.6.1.4.1.333.1.1.5.15.1.1
cntSCRNumberA SCR number installed in this node.ro
INTEGER
.1.3.6.1.4.1.333.1.1.5.15.1.2
cntSerialAlfaNumberThe machine serial number of this node.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.1.5.16
cntSysMemory
OBJECT IDENTIFIER
.1.3.6.1.4.1.333.1.1.6
cntMemBBramAddressThe starting address of battery-backed-up RAM. BBRAM is used to store the software and configuration files.ro
INTEGER
.1.3.6.1.4.1.333.1.1.6.1
cntMemBBramSpaceThe amount of BBRAM memory in bytes installed in this node.ro
INTEGER
.1.3.6.1.4.1.333.1.1.6.2
cntMemBBramFreeThe amount of BBRAM memory in bytes available in this node.ro
INTEGER
.1.3.6.1.4.1.333.1.1.6.3
cntMemSramAddressThe starting address of static ram. SRAM is used as buffer space.ro
INTEGER
.1.3.6.1.4.1.333.1.1.6.4
cntMemSramSpaceThe amount of SRAM memory in bytes installed in this node.ro
INTEGER
.1.3.6.1.4.1.333.1.1.6.5
cntMemSramFreeThe amount of SRAM memory in bytes available in this node.ro
INTEGER
.1.3.6.1.4.1.333.1.1.6.6
cntSysCpuTableList of cpu entries.
SEQUENCE OF CntSysCpuEntry
.1.3.6.1.4.1.333.1.1.7
cntSysCpuEntryA cpu entry.
CntSysCpuEntry
.1.3.6.1.4.1.333.1.1.7.1
cntCpuIndexThe cpu index.ro
Enumeration
.1.3.6.1.4.1.333.1.1.7.1.1
cntCpuMemSpaceThe amount of memory in bytes installed in this cpu.ro
INTEGER
.1.3.6.1.4.1.333.1.1.7.1.2
cntCpuMemFreeThe amount of memory in bytes available in this cpu.ro
INTEGER
.1.3.6.1.4.1.333.1.1.7.1.3
cntCpuTaskTableList of cpu task entries.
SEQUENCE OF CntCpuTaskEntry
.1.3.6.1.4.1.333.1.1.7.1.4
cntCpuTaskEntryA cpu task list entry.
CntCpuTaskEntry
.1.3.6.1.4.1.333.1.1.7.1.4.1
cntCpuTaskIndexThe relative index of the task on this cpu.ro
INTEGER
.1.3.6.1.4.1.333.1.1.7.1.4.1.1
cntCpuTaskNameThe operating system name for a loaded and possibly executing task on this cpu.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.1.7.1.4.1.2
cntinterfaces
OBJECT IDENTIFIER
.1.3.6.1.4.1.333.1.2
cntifTableA list of CNT interface entries.
SEQUENCE OF CntifEntry
.1.3.6.1.4.1.333.1.2.1
cntifEntryAn CNT interface entry.
CntifEntry
.1.3.6.1.4.1.333.1.2.1.1
cntifIndexAn index value that uniquely identifies an interface on a CNT node. The interface identified by a particular value of this index is the same interface as identified by the same value of IfIndex.ro
INTEGER
.1.3.6.1.4.1.333.1.2.1.1.1
cntifTypeThe type of interface. For standardized interface types in mib-2, this number is redundant. CNT specific interface types are appended to the end of the standardized list.ro
Enumeration
.1.3.6.1.4.1.333.1.2.1.1.2
cntifCpuThe cpu number where the device driver for this interface resides.ro
Enumeration
.1.3.6.1.4.1.333.1.2.1.1.3
cntifSubIndexA value that uniquely indexes an interface in a multiply-interfaced device driver.ro
INTEGER
.1.3.6.1.4.1.333.1.2.1.1.4
cntIfsStateA 32 bit-map of the interface states. The bits are ordered from 1 to 32 with the most significant bit on the left. if the bit is set, the corresponding interface is up. if the bit is clear, the interface is not up - down or in test mode.ro
INTEGER
.1.3.6.1.4.1.333.1.2.2
cnticmp
OBJECT IDENTIFIER
.1.3.6.1.4.1.333.1.5
cnticmpInDuNetsThe number of times a destination unreachable message was received for an unreachable network.ro
Counter
.1.3.6.1.4.1.333.1.5.1
cnticmpInDuHostsThe number of times a destination unreachable message was received for an unreachable host.ro
Counter
.1.3.6.1.4.1.333.1.5.2
cnticmpInDuProtosThe number of times a destination unreachable message was received due to an unreachable protocol.ro
Counter
.1.3.6.1.4.1.333.1.5.3
cnticmpInDuPortsThe number of times a destination unreachable message was received due to an unreachable port.ro
Counter
.1.3.6.1.4.1.333.1.5.4
cnticmpInDuFragsThe number of times a destination unreachable message was received due to a fragmentation requirement but the Don't Fragment flag is set.ro
Counter
.1.3.6.1.4.1.333.1.5.5
cnticmpInDuSourcesThe number of times a destination unreachable message was received due to a source route that is not usable.ro
Counter
.1.3.6.1.4.1.333.1.5.6
cnticmpInTmXceedsThe number of times a time exceeded message was received for an expired datagram.ro
Counter
.1.3.6.1.4.1.333.1.5.7
cnticmpInTmFragsThe number of times a time exceeded message was received for a datagram that could not be reassembled before its lifetime expired.ro
Counter
.1.3.6.1.4.1.333.1.5.8
cnticmpInReNetsThe number of times a redirect message was received due to a shorter path to a destination network having been found.ro
Counter
.1.3.6.1.4.1.333.1.5.9
cnticmpInReHostsThe number of times a redirect message was received due to a shorter path to a destination host having been found.ro
Counter
.1.3.6.1.4.1.333.1.5.10
cnticmpInReServnetsThe number of times a redirect message was received due to a shorter path to a destination network with the requested type of service having been found.ro
Counter
.1.3.6.1.4.1.333.1.5.11
cnticmpInReServhostsThe number of times a redirect message was received due to a shorter path to a destination host with the requested type of service having been found.ro
Counter
.1.3.6.1.4.1.333.1.5.12
cnticmpOutDuNetsThe number of times a destination unreachable message was sent to a requester when it attempted to send a datagram to an unreachable network.ro
Counter
.1.3.6.1.4.1.333.1.5.13
cnticmpOutDuHostsThe number of times a destination unreachable message was sent to a requester when it attempted to send a datagram to an unreachable host.ro
Counter
.1.3.6.1.4.1.333.1.5.14
cnticmpOutDuProtosThe number of times a destination unreachable message was sent to a requester when it attempted to send a datagram to an unreachable protocol.ro
Counter
.1.3.6.1.4.1.333.1.5.15
cnticmpOutDuPortsThe number of times a destination unreachable message was sent to a requester when it attempted to send a datagram to an unreachable port.ro
Counter
.1.3.6.1.4.1.333.1.5.16
cnticmpOutDuFragsThe number of times a destination unreachable message was sent to a requester when it attempted to send a datagram requiring fragmentation but the Don't Fragment flag is set.ro
Counter
.1.3.6.1.4.1.333.1.5.17
cnticmpOutDuSourcesThe number of times a destination unreachable message was sent due to a source route that is not usable.ro
Counter
.1.3.6.1.4.1.333.1.5.18
cnticmpOutTmXceedsThe number of times a time exceeded message was sent for an expired datagram.ro
Counter
.1.3.6.1.4.1.333.1.5.19
cnticmpOutTmFragsThe number of times a time exceeded message was sent for a datagram that could not be reassembled before its lifetime expired.ro
Counter
.1.3.6.1.4.1.333.1.5.20
cnticmpOutReNetsThe number of times a redirect message was sent due to a shorter path to a destination network having been found.ro
Counter
.1.3.6.1.4.1.333.1.5.21
cnticmpOutReHostsThe number of times a redirect message was sent due to a shorter path to a destination host having been found.ro
Counter
.1.3.6.1.4.1.333.1.5.22
cnticmpOutReServnetsThe number of times a redirect message was sent due to a shorter path to a destination network with the requested type of service having been found.ro
Counter
.1.3.6.1.4.1.333.1.5.23
cnticmpOutReServhostsThe number of times a redirect message was sent due to a shorter path to a destination host with the requested type of service having been found.ro
Counter
.1.3.6.1.4.1.333.1.5.24
cnttransmission
OBJECT IDENTIFIER
.1.3.6.1.4.1.333.1.10
cntdot3
OBJECT IDENTIFIER
.1.3.6.1.4.1.333.1.10.1
cntdot3TableStatus information and control variables for a collection of ethernet software device drivers in a particular CNT system.
SEQUENCE OF CntDot3Entry
.1.3.6.1.4.1.333.1.10.1.1
cntdot3EntryStatus information and control variables for a particular CNT ethernet software device driver.
CntDot3Entry
.1.3.6.1.4.1.333.1.10.1.1.1
cntdot3IndexAn index value that uniquely identifies an interface to a CNT ethernet-like medium. The interface identified by a particular value of this index is the same interface as identified by the same value of IfIndex.ro
INTEGER
.1.3.6.1.4.1.333.1.10.1.1.1.1
cntdot3SoftwareIDThe binary software revision number in the header of the ethernet driver.ro
IpAddress
.1.3.6.1.4.1.333.1.10.1.1.1.2
cntdot3BufsAllocatedThe number of CNT buffers allocated by the ethernet device driver at initialization.ro
INTEGER
.1.3.6.1.4.1.333.1.10.1.1.1.3
cntdot3BufTooManysThe number of buffers sent by a higher layer that were returned to that layer without transmission due to a full queue of waiting outbound buffers.ro
Counter
.1.3.6.1.4.1.333.1.10.1.1.1.4
cntdot3BufNotAvailsThe number of requests made to the free pool of ethernet buffers that failed due to a lack buffers in that pool.ro
Counter
.1.3.6.1.4.1.333.1.10.1.1.1.5
cntdot3BufPriorityThe priority value assigned to inbound ethernet buffers.ro
INTEGER
.1.3.6.1.4.1.333.1.10.1.1.1.6
cntdot3PICBusErrsThe number of times a failure was detected when attempting to access the VME bus.ro
Counter
.1.3.6.1.4.1.333.1.10.1.1.1.7
cntdot3PICDMAErrsThe number of times ethernet local memory had a parity error during a DMA memory cycle. These errors would normally indicate a hardware problem.ro
Counter
.1.3.6.1.4.1.333.1.10.1.1.1.8
cntdot3PICMemSeqErrsThe number of times the hardware could not successfully arbitrate multiple requests to access ethernet local memory. These errors would normally indicate a hardware problem.ro
Counter
.1.3.6.1.4.1.333.1.10.1.1.1.9
cntdot3PICMemParityErrsThe number of ethernet local memory parity errors. These errors would normally indicate a hardware problem.ro
Counter
.1.3.6.1.4.1.333.1.10.1.1.1.10
cntdot3PICSpuriousIntsThe number of interrupts generated by the PIC that were not mapped to any particular hardware event.ro
Counter
.1.3.6.1.4.1.333.1.10.1.1.1.11
cntdot3LanceIntsThe number of LANCE hardware interrupts detected by the controlling CPU.ro
Counter
.1.3.6.1.4.1.333.1.10.1.1.1.12
cntdot3LanceParityErrsThe number of parity errors detected when the LANCE was accessing local memory. These errors would normally indicate a hardware problem.ro
Counter
.1.3.6.1.4.1.333.1.10.1.1.1.13
cntdot3LanceMemErrsThe number of times the LANCE detected a local memory access failure.ro
Counter
.1.3.6.1.4.1.333.1.10.1.1.1.14
cntdot3LanceMissedPktsThe number of packets on the ethernet medium that were detected by the LANCE but failed to be captured in the inbound queue.ro
Counter
.1.3.6.1.4.1.333.1.10.1.1.1.15
cntdot3LanceUnderFlowsThe number of message truncated by the LANCE transmitter due to data late from memory. An underflow indication by the LANCE indicates that the silo was emptied before the end of the packet was reached.ro
Counter
.1.3.6.1.4.1.333.1.10.1.1.1.16
cntdot3LanceOverFlowsThe number of times the LANCE receiver lost all or part of the incoming packet due to an inability to store the packet in a memory buffer before the internal silo overflowed.ro
Counter
.1.3.6.1.4.1.333.1.10.1.1.1.17
cntdot3LanceTxWaitQThe number of buffers in local memory and on the ethernet device driver's software queue awaiting transmission by the LANCE.ro
INTEGER
.1.3.6.1.4.1.333.1.10.1.1.1.18
cntdot3DMAChan1RxErrThe error code reported by the DMA controller channel 1. This channel is used to write inbound ethernet messages.ro
Enumeration
.1.3.6.1.4.1.333.1.10.1.1.1.19
cntdot3DMAChan3RxErrThe error code reported by the DMA controller channel 3. This channel is used to write inbound ethernet messages.ro
Enumeration
.1.3.6.1.4.1.333.1.10.1.1.1.20
cntdot3DMAChan0TxErrThe error code reported by the DMA controller channel 0. This channel is used to write outbound ethernet messages.ro
Enumeration
.1.3.6.1.4.1.333.1.10.1.1.1.21
cntdot3DMAChan2TxErrThe error code reported by the DMA controller channel 2. This channel is used to write outbound ethernet messages.ro
Enumeration
.1.3.6.1.4.1.333.1.10.1.1.1.22
cntdot3DMAChan1RxErrsThe number of errors reported by the DMA controller channel 1. This channel is used to write inbound ethernet messages.ro
Counter
.1.3.6.1.4.1.333.1.10.1.1.1.23
cntdot3DMAChan3RxErrsThe number of errors reported by the DMA controller channel 1. This channel is used to write inbound ethernet messages.ro
Counter
.1.3.6.1.4.1.333.1.10.1.1.1.24
cntdot3DMAChan0TxErrsThe number of errors reported by the DMA controller channel 1. This channel is used to write outbound ethernet messages.ro
Counter
.1.3.6.1.4.1.333.1.10.1.1.1.25
cntdot3DMAChan2TxErrsThe number of errors reported by the DMA controller channel 1. This channel is used to write outbound ethernet messages.ro
Counter
.1.3.6.1.4.1.333.1.10.1.1.1.26
cntdot3DMARxWaitQThe number of successfully received ethernet messages awaiting transmission by the DMA to global memory buffers.ro
INTEGER
.1.3.6.1.4.1.333.1.10.1.1.1.27
cntdot3DMATxWaitQThe number of buffers waiting in an outbound queue ready to transmitted to local memory from global memory. Buffers must be moved from global memory to local memory in order to be transmitted by the LANCE.ro
INTEGER
.1.3.6.1.4.1.333.1.10.1.1.1.28
cntdot3LPXParityErrsThe number of local memory parity errors during an LPX memory cycle.ro
Counter
.1.3.6.1.4.1.333.1.10.1.1.1.29
cntdot3Chan1MisreadsThe number of times a mismatch was detected between the DMA channel 1 table and the DMA Memory Access Register.ro
Counter
.1.3.6.1.4.1.333.1.10.1.1.1.30
cntfddi
OBJECT IDENTIFIER
.1.3.6.1.4.1.333.1.10.2
cntFddiSMT
OBJECT IDENTIFIER
.1.3.6.1.4.1.333.1.10.2.1
cntFddiSMTNumberThe number of SMT implementations on this network management application entity.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.1.1
cntFddiSMTTableA list of SMT entries. The number of entries is given by the value of snmpFddiSMTNumber.
SEQUENCE OF CntFddiSMTEntry
.1.3.6.1.4.1.333.1.10.2.1.2
cntFddiSMTEntryAn SMT entry containing information common to a given SMT.
CntFddiSMTEntry
.1.3.6.1.4.1.333.1.10.2.1.2.1
cntFddiSMTIndexA unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.1.2.1.1
cntFddiSMTManufacturerData32 octets of manufacturer data. The first component is the three octet Organizationally Unique Identifier (OUI) assigned by IEEE. The second component is the FDDI manufacturer's data (29 octets).ro
OCTET STRING
.1.3.6.1.4.1.333.1.10.2.1.2.1.2
cntFddiSMTUserData32 octets of user defined information.ro
OCTET STRING
.1.3.6.1.4.1.333.1.10.2.1.2.1.3
cntFddiSMTReportLimitGives the limit on the number of Status Report Frames that shall be queued for transmission after supported Condition becomes inactive or after any supported Event has been detected.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.1.2.1.4
cntFddiSMTMsgTimeStampThis timestamp is used in some SMT frames as an indication of the time the message was created at the sending station. When read, the accessed value shall be greater than or equal to the value used in the station's last message. The timestamp may be reset whenever there is a discontinuity in the accumulation of a statistical counter.ro
OCTET STRING
.1.3.6.1.4.1.333.1.10.2.1.2.1.5
cntFddiSMTTransitionTimeStampThis timestamp holds the time of occurrence of the last condition or event in the station. It is used in the SMT Status Report Frame (SRF). It is set to a new value on each event to capture the time of the latest event occurrence. On power-up, the value of the attribute is zero.ro
OCTET STRING
.1.3.6.1.4.1.333.1.10.2.1.2.1.6
cntFddiSMTSetCountThis count is updated each time a parameter is changed on behalf of a request from either the local management interface or the remote interface via SMT Parameter Management Frames. It is used to provide consistency control for MIB updates.ro
OCTET STRING
.1.3.6.1.4.1.333.1.10.2.1.2.1.7
cntFddiSMTLastSetStationIDThis object identifies the last station to set MIB information in the FDDI MIB.ro
OCTET STRING
.1.3.6.1.4.1.333.1.10.2.1.2.1.8
cntFddiMAC
OBJECT IDENTIFIER
.1.3.6.1.4.1.333.1.10.2.2
cntFddiMACNumberThe total number of MAC implementations across all SMTs on this network management application entity.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.2.1
cntFddiMACTableA list of MAC entries. The number of entries is given by the value of snmpFddiMACNumber.
SEQUENCE OF CntFddiMACEntry
.1.3.6.1.4.1.333.1.10.2.2.2
cntFddiMACEntryA MAC entry containing information common to a given MAC.
CntFddiMACEntry
.1.3.6.1.4.1.333.1.10.2.2.2.1
cntFddiMACSMTIndexThe value of the SMT index associated with this MAC.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.2.2.1.1
cntFddiMACIndexA unique value for each MAC on the managed entity. The MAC identified by a particular value of this index is that identified by the same value of an ifIndex object instance.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.2.2.1.2
cntFddiMACBridgeFunctionGives the bridge type for a MAC that has a bridge capability.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.2.2.1.3
cntFddiMACDownstreamNbrThe MAC's downstream neighbor's long individual MAC address. It may be determined by the Neighbor Information Frame Request/ Response protocol. It is optional an reported as zero in SMT frames if unknown or unsupported.ro
OCTET STRING
.1.3.6.1.4.1.333.1.10.2.2.2.1.4
cntFddiMACOldDownstreamNbrThis object identifies this MAC's previous downstream neighbor.ro
OCTET STRING
.1.3.6.1.4.1.333.1.10.2.2.2.1.5
cntFddiMACRootConcentratorMacA MAC in a concentrator is a root concentrator MAC if its transmit path exits the concentrator via a Port in a peer node; or if the MAC exits via a Port in a tree node and there is no A, B, or S Ports that are active on that MAC's current Path.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.2.2.1.6
cntFddiMACLongAliasA possibly null set of 48 bit addresses (aliases) for this MAC.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.2.2.1.7
cntFddiMACShortAliasA possibly null set of 16 bit addresses (aliases) for this MAC.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.2.2.1.8
cntFddiMACLongGrpAddrA possibly null set of 48 bit group addresses (aliases) for this MAC.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.2.2.1.9
cntFddiMACShortGrpAddrA possibly null set of 16 bit group addresses (aliases) for this MAC.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.2.2.1.10
cntFddiMACTPri0Reference: Mac 2.2.1. It is reported as the unsigned twos-complement of the number (as described in the MAC specification; ref. MAC 7.3.5.2).ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.2.2.1.11
cntFddiMACTPri1Reference: Mac 2.2.1. It is reported as the unsigned twos-complement of the number (as described in the MAC specification; ref. MAC 7.3.5.2).ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.2.2.1.12
cntFddiMACTPri2Reference: Mac 2.2.1. It is reported as the unsigned twos-complement of the number (as described in the MAC specification; ref. MAC 7.3.5.2).ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.2.2.1.13
cntFddiMACTPri3Reference: Mac 2.2.1. It is reported as the unsigned twos-complement of the number (as described in the MAC specification; ref. MAC 7.3.5.2).ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.2.2.1.14
cntFddiMACTPri4Reference: Mac 2.2.1. It is reported as the unsigned twos-complement of the number (as described in the MAC specification; ref. MAC 7.3.5.2).ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.2.2.1.15
cntFddiMACTPri5Reference: Mac 2.2.1. It is reported as the unsigned twos-complement of the number (as described in the MAC specification; ref. MAC 7.3.5.2).ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.2.2.1.16
cntFddiMACTPri6Reference: Mac 2.2.1. It is reported as the unsigned twos-complement of the number (as described in the MAC specification; ref. MAC 7.3.5.2).ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.2.2.1.17
cntFddiMACCopiesThe count of frames successfully received into the station's receive buffers by this MAC. Note that this count does not include the frames that are not copied. This counter is optional.ro
Counter
.1.3.6.1.4.1.333.1.10.2.2.2.1.18
cntFddiMACTransmitsThe count of frames transmitted by the MAC.ro
Counter
.1.3.6.1.4.1.333.1.10.2.2.2.1.19
cntFddiMACTokensThe total count of the number of times the station has received a token (total of non-restricted and restricted) on this MAC. This count is used for determination of network load.ro
Counter
.1.3.6.1.4.1.333.1.10.2.2.2.1.20
cntFddiMACTvxExpiresA count of the times that TVX expired.ro
Counter
.1.3.6.1.4.1.333.1.10.2.2.2.1.21
cntFddiMACNotCopiesThe count of frames that should have been copied but were not. This might occur due to local buffer congestion. Because of implementation considerations, this count may be less than the actual number of frames not copied. It is not a requirement that this count be exact.ro
Counter
.1.3.6.1.4.1.333.1.10.2.2.2.1.22
cntFddiMACLatesReference: MAC 2.2.1, LateCt.ro
Counter
.1.3.6.1.4.1.333.1.10.2.2.2.1.23
cntFddiMACRingOpsThe count of the number of times the ring has entered the 'Ring Operational' state from 'Ring Not Operational' state. Because of implementation considerations, this count may not be exact.ro
Counter
.1.3.6.1.4.1.333.1.10.2.2.2.1.24
cntFddiMACBaseFramesThe value of FddiMACFrameCt at the sample time prior to the sample time when the FrameErrorThreshold was reached. It is used in reporting the condition to give the manager the necessary data to reconstruct the condition at the station. Reset when the associated condition becomes active.ro
Counter
.1.3.6.1.4.1.333.1.10.2.2.2.1.25
cntFddiMACBaseErrsThe value of FddiMACErrorCt at the sample time prior to the sample time when the FrameErrorThreshold was reached. It is used in reporting the condition to give the manager the necessary data to reconstruct the condition at the station. Reset to the current value of the corresponding 'real' counter when the associated condition becomes active.ro
Counter
.1.3.6.1.4.1.333.1.10.2.2.2.1.26
cntFddiMACBaseLostsThe value of FddiMACLostCt at the sample time prior to the sample time when the FrameErrorThreshold was reached. It is used in reporting the condition to give the manager the necessary data to reconstruct the condition at the station. Reset to the current value of the corresponding 'real' counter when the associated condition becomes active.ro
Counter
.1.3.6.1.4.1.333.1.10.2.2.2.1.27
cntFddiMACBaseTimeFrameErrorThe value of the station timer at the sample time prior to the sample time when the FrameErrorThreshold was reached. It is used in reporting the condition to give the manager the necessary data to reconstruct the condition at the station. Reset when the new condition becomes active.ro
OCTET STRING
.1.3.6.1.4.1.333.1.10.2.2.2.1.28
cntFddiMACBaseNotCopiesThe value of FddiMACNotCopiedCt at the sample time prior to the sample time when the NotCopiedThreshold was reached. It is used in reporting the condition to give the manager the necessary data to reconstruct the condition at the station. Reset when the new condition becomes active.ro
Counter
.1.3.6.1.4.1.333.1.10.2.2.2.1.29
cntFddiMACBaseTimeNotCopiedThe value of the station timer at the sample time prior to the sample time when the NotCopiedThreshold was reached. It is used in reporting the condition to give the manager the necessary data to reconstruct the condition at the station. Reset when the new condition becomes active.ro
OCTET STRING
.1.3.6.1.4.1.333.1.10.2.2.2.1.30
cntFddiMACNotCopiedThresholdA threshold for determining when a MAC Condition report should be generated. It is used to determine when a station has an unacceptable count of frames 'not-copied'. It could be used as an indication of buffer congestion on this MAC.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.2.2.1.31
cntFddiMACBaseCopiesThe value of FddiMACCopiedCt at the sample time prior to the sample time when the NotCopiedThreshold was reached. It is used in reporting the condition to give the manager the necessary data to reconstruct the condition at the station. Reset when the new condition becomes active.ro
Counter
.1.3.6.1.4.1.333.1.10.2.2.2.1.32
cntFddiMACNotCopiedRatioThis attribute is the value of the ratio: FddiMACNotCopiedCt FddiMACCopiedCt + FddiMACNotCopiedCtro
INTEGER
.1.3.6.1.4.1.333.1.10.2.2.2.1.33
cntFddiMACNotCopiedConditionIndicates the NotCopiedCondition is active when set. Cleared when the condition clears and on power up.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.2.2.1.34
cntFddiMACLLCServiceAvailableIndicates whether the LLC Service is enabled.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.2.2.1.35
cntFddiMACMasterSlaveLoopStatusIndicates this MAC's Master/Slave Loop Status. This status would be obtained with the Root MAC Information Protocol.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.2.2.1.36
cntFddiMACRootMACDownStreamPORTTypeIndicates the PC-Type of the first PORT that is downstream of the Root MAC associated with this MAC. The Root MAC information would be determined in the Root MAC Information Protocol.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.2.2.1.37
cntFddiMACRootMACCurrentPathIndicates the current path of the Root MAC on the same logical ring as this MAC. This Root MAC information would be determined in the Root MAC Information Protocol.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.2.2.1.38
cntFddiPATH
OBJECT IDENTIFIER
.1.3.6.1.4.1.333.1.10.2.3
cntFddiPATHNumberThe total number of PATH implementations across all SMTs on this network management application entity.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.3.1
cntFddiPATHTableA list of PATH entries. The number of entries is given by the value of snmpFddiPATHNumber.
SEQUENCE OF CntFddiPATHEntry
.1.3.6.1.4.1.333.1.10.2.3.2
cntFddiPATHEntryA PATH entry containing information common to a given PATH.
CntFddiPATHEntry
.1.3.6.1.4.1.333.1.10.2.3.2.1
cntFddiPATHSMTIndexThe value of the SMT index associated with this PATH.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.3.2.1.1
cntFddiPATHIndexA unique value for each PATH within a given SMT. Its value ranges between 1 and the sum of the values of snmpFddiSMTNonMasterCt and snmpFddiSMTMasterCt on the given SMT.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.3.2.1.2
cntFddiPATHTraceMaxExpirationReference: SMT 9.4.4.2.2 TraceMax.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.3.2.1.3
cntFddiPATHTVXLowerBoundThe lower bound of TVX supported for this PATH.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.3.2.1.4
cntFddiPATHTMaxLowerBoundThe lower bound of TMax supported for this PATH class.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.3.2.1.5
cntFddiPATHTypeThis object describes the type of PATH: 1 = Primary, 2 = Secondary, 3 = Local.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.3.2.1.6
cntFddiPATHPORTOrderTells whether the PORTs on this path are numbered in ascending of descending order.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.3.2.1.7
cntFddiPATHRingLatencyGives the total accumulated latency of the ring associated with this PATH. May be measured directly by the station or may be calculated by a management station.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.3.2.1.8
cntFddiPATHTraceStatusGives the current trace status of the PATH.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.3.2.1.9
cntFddiPATHSbaThe Synchronous Bandwidth Allocation for this PATH within the station in octet units. In stations that don't support synchronous service, this attribute is read only and has the value of 0.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.3.2.1.10
cntFddiPATHSbaOverheadThe Synchronous Bandwidth Allocation overhead for this PATH (bytes/frame). In stations that don't support synchronous service, this attribute is read only and has the value of 0.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.3.2.1.11
cntFddiPATHStatusThe current status of the PATH.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.3.2.1.12
cntFddiPATHTRmodeUsed by RMT to limit the duration of restricted dialogs on a PATH.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.3.2.1.13
cntFddiPORT
OBJECT IDENTIFIER
.1.3.6.1.4.1.333.1.10.2.4
cntFddiPORTNumberThe total number of PORT implementations across all SMTs on this network management application entity.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.4.1
cntFddiPORTTableA list of PORT entries. The number of entries is given by the value of snmpFddiPORTNumber.
SEQUENCE OF CntFddiPORTEntry
.1.3.6.1.4.1.333.1.10.2.4.2
cntFddiPORTEntryA PORT entry containing information common to a given PORT.
CntFddiPORTEntry
.1.3.6.1.4.1.333.1.10.2.4.2.1
cntFddiPORTSMTIndexThe value of the SMT index associated with this PORT.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.4.2.1.1
cntFddiPORTIndexA unique value for each PORT within a given SMT. Its value ranges between 1 and the sum of the values of snmpFddiSMTNonMasterCt and snmpFddiSMTMasterCt on the given SMT.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.4.2.1.2
cntFddiPORTFotxClassThe Fiber Optic Transmitter Class.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.4.2.1.3
cntFddiPORTMaintLineStateThe current maintenance line status of this PORT.ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.4.2.1.4
cntFddiPORTEBErrsThe count of the times an Elasticity Buffer Error has occurred.ro
Counter
.1.3.6.1.4.1.333.1.10.2.4.2.1.5
cntFddiPORTBaseLerEstimateThe value of FddiPORTLerEstimate at the sample time prior to when the sample time that the PORT LER Event was generated (the condition became active).ro
INTEGER
.1.3.6.1.4.1.333.1.10.2.4.2.1.6
cntFddiPORTBaseLemRejectsThe value of FddiPORTLerRejectCt at the sample time prior to when the sample time that the PORT LER Event was generated (the condition became active).ro
Counter
.1.3.6.1.4.1.333.1.10.2.4.2.1.7
cntFddiPORTBaseLemsThe value of FddiPORTLerCt at the sample time prior to when the sample time that the PORT LER Event was generated (the condition became active).ro
Counter
.1.3.6.1.4.1.333.1.10.2.4.2.1.8
cntFddiPORTBaseLerTimeStampThe value of FddiSMTMsgTimestamp at the sample time prior to when the sample time that the PORT LER Event was generated (the condition became active).ro
OCTET STRING
.1.3.6.1.4.1.333.1.10.2.4.2.1.9
cntsnmp
OBJECT IDENTIFIER
.1.3.6.1.4.1.333.1.11
cntsnmpconfig
OBJECT IDENTIFIER
.1.3.6.1.4.1.333.1.11.1
cntMibVersionThe version identifier of the mib file that the agent has loaded from BBRAM.ro
IpAddress
.1.3.6.1.4.1.333.1.11.1.1
cntMibObjectCountNumber of objects in the MIB description file, !MIB, in this CNT platform. This file contains objects from RFC 1213, RFC 1284, RFC 1285, and CNT's enterprise. Depending upon the configuration of this node, the node may or may not support all of these objects.ro
INTEGER
.1.3.6.1.4.1.333.1.11.1.2
cntConfigVersionVersion number of this SNMP agent from the configuration record.ro
INTEGER
.1.3.6.1.4.1.333.1.11.1.3
cntProxyStatusThis flag indicates whether this SNMP agent is acting as a proxy, is being proxied, or is a normally behaving SNMP agent.ro
Enumeration
.1.3.6.1.4.1.333.1.11.1.4
cntProxyCountIf this node is configured to operate as a proxy agent, this number reflects the number of proxied nodes that this node is configured to manage in !NDE.ro
INTEGER
.1.3.6.1.4.1.333.1.11.1.5
cntSnmpBufferCountNumber of buffers reserved for this SNMP agent for outgoing message from the configuration record.ro
INTEGER
.1.3.6.1.4.1.333.1.11.1.6
cntIfPollIntervalNumber of seconds for the SNMP agent to wait between checks of the CNT platform's interfaces for operation status. These interface checks result in the link down and link up traps. This value is from the configuration record.ro
INTEGER
.1.3.6.1.4.1.333.1.11.1.7
cntIfNextPollNumber of seconds for the next internal SNMP agent interface poll. These interface checks result in the link down and link up traps. This value is from the configuration record.ro
INTEGER
.1.3.6.1.4.1.333.1.11.1.8
cntDoDIPCountThe number of DoD IP addresses (internet records in !CFG) configured in this node that the agent detected upon startup. This will not equal the number of interfaces on this node.ro
INTEGER
.1.3.6.1.4.1.333.1.11.1.9
cntDot3CountThe number of ethernet interfaces that are manageable by this agent on this node.ro
INTEGER
.1.3.6.1.4.1.333.1.11.1.10
cntFddiCountThe number of FDDI interfaces that are manageable by this agent on this node.ro
INTEGER
.1.3.6.1.4.1.333.1.11.1.11
cntFddiPortCountThe number of FDDI ports that are manageable by this agent on this node.ro
INTEGER
.1.3.6.1.4.1.333.1.11.1.12
cntDataLinkCountThe number of Data Link Layers Instances that are manageable by this agent on this node.ro
INTEGER
.1.3.6.1.4.1.333.1.11.1.13
cntLLC1CountThe number of Data Link Layers Instances of type Logical Link Control 1 (ISO 8802/2) that are manageable by this agent on this node.ro
INTEGER
.1.3.6.1.4.1.333.1.11.1.14
cntCofiVersionThe version of the the COmmon File Interface (COFI) module that is loaded into this node. COFI is required by the snmp agent for access to some CNT system objects. The version is in the format: version.day.month.year.ro
IpAddress
.1.3.6.1.4.1.333.1.11.1.15
cntsnmpstat
OBJECT IDENTIFIER
.1.3.6.1.4.1.333.1.11.2
cntMib2RequestsThe number of requests received by the agent for mib-2 objects.ro
Counter
.1.3.6.1.4.1.333.1.11.2.1
cntFddiRequestsThe number of requests received by the agent for FDDI objects in the experimental or transmission subtree.ro
Counter
.1.3.6.1.4.1.333.1.11.2.2
cntDot3RequestsThe number of requests received by the agent for 802.3 objects in the experimental or transmission subtree.ro
Counter
.1.3.6.1.4.1.333.1.11.2.3
cntCntRequestsThe number of requests received by the agent for objects in the Computer Network Technology Corp. private enterprise subtree.ro
Counter
.1.3.6.1.4.1.333.1.11.2.4
cntRowAdditionsThe number of table row additions that have been successful through SNMP requests from a network management station.ro
Counter
.1.3.6.1.4.1.333.1.11.2.5
cntRowModifiesThe number of table row modifications that have been successful through SNMP requests from a network management station.ro
Counter
.1.3.6.1.4.1.333.1.11.2.6
cntRowDeletionsThe number of table row deletions that have been successful through SNMP requests from a network management station.ro
Counter
.1.3.6.1.4.1.333.1.11.2.7
cntRowErrorsThe number of table row additions that were attempted through SNMP requests from a network management station, but were not complete in a single request. These requests were not successfully completed.ro
Counter
.1.3.6.1.4.1.333.1.11.2.8
cntBadVersionsThe number of table row additions that were attempted through SNMP requests from a network management station, but were not complete in a single request. These requests were not successfully completed.ro
Counter
.1.3.6.1.4.1.333.1.11.2.9
cntNoBuffersThe number of times the agent needed a buffer and did not have one. The agent uses buffers when making requests to the MEs.ro
Counter
.1.3.6.1.4.1.333.1.11.2.10
cntMailTimeoutsThe number of timeouts received from the MEs when a mib request was given.ro
Counter
.1.3.6.1.4.1.333.1.11.2.11
cntCachedResponsesThe number of requests to the MEs that were cached. Each cached message contains as many mib objects as the request to the ME.ro
Counter
.1.3.6.1.4.1.333.1.11.2.12
cntUsedCachesThe number of objects for which the cached mib objects were used.ro
Counter
.1.3.6.1.4.1.333.1.11.2.13
cntsnmptrap
OBJECT IDENTIFIER
.1.3.6.1.4.1.333.1.11.3
cntTrapDestCountThe number of trap destinations that the agent will forward the configured traps to.ro
INTEGER
.1.3.6.1.4.1.333.1.11.3.1
cntLastTrapMsgTextual description of the last trap message sent from this SNMP agent. The object identifier for cntSysLastTrapMsg is sent along with each trap.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.11.3.2
cntTrapTableA list of trap entries. There is a maximum of six trap entries. These values, except TrapIf, are set in the configuration record.
SEQUENCE OF CntTrapEntry
.1.3.6.1.4.1.333.1.11.3.3
cnttrapEntryA trap entry containing the information needed to send out a trap.
CntTrapEntry
.1.3.6.1.4.1.333.1.11.3.3.1
cnttrapIndexTrap table index.ro
INTEGER
.1.3.6.1.4.1.333.1.11.3.3.1.1
cnttrapAddressTrap destination address.ro
IpAddress
.1.3.6.1.4.1.333.1.11.3.3.1.2
cntsnmpTrapFlagsFlag setting specifying which types of traps to send to this destination. This value is derived from 'or'ing the following values: cold start(0x01), link down(0x04), link up(0x08), and authentication failure(0x10).ro
INTEGER
.1.3.6.1.4.1.333.1.11.3.3.1.3
cntTrapFlagsFlag settings reserved for future enterprise specific trap enabling.ro
INTEGER
.1.3.6.1.4.1.333.1.11.3.3.1.4
cnttrapIfTrap source address.ro
IpAddress
.1.3.6.1.4.1.333.1.11.3.3.1.5
cntsnmpproxy
OBJECT IDENTIFIER
.1.3.6.1.4.1.333.1.11.4
cntProxyTableA list of proxy entries. This table contains an entry for each proxied node from this proxy agent. If this node is not configured as a proxy agent then this table is empty.
SEQUENCE OF CntProxyEntry
.1.3.6.1.4.1.333.1.11.4.1
cntproxyEntryA proxy entry containing the information needed to carry an SNMP request to a proxied node.
CntProxyEntry
.1.3.6.1.4.1.333.1.11.4.1.1
cntproxyIndexProxy table index.ro
INTEGER
.1.3.6.1.4.1.333.1.11.4.1.1.1
cntproxyAddressProxied node destination DoD IP address that is used by the NMS.ro
IpAddress
.1.3.6.1.4.1.333.1.11.4.1.1.2
cntproxyNodeProxied node destination CNT node address that is used by the local CNT router to access the destination.ro
IpAddress
.1.3.6.1.4.1.333.1.11.4.1.1.3
cntdiagnostics
OBJECT IDENTIFIER
.1.3.6.1.4.1.333.1.12
cntTraceTableList of entries in the global trace area.
SEQUENCE OF CntTraceEntry
.1.3.6.1.4.1.333.1.12.1
cnttraceEntryA trace entry.
CntTraceEntry
.1.3.6.1.4.1.333.1.12.1.1
cnttraceIndexThe index which uniquely identifies the trace row instance in a CNT node.ro
INTEGER
.1.3.6.1.4.1.333.1.12.1.1.1
cnttraceTypeThe type of trace entry.ro
INTEGER
.1.3.6.1.4.1.333.1.12.1.1.2
cnttraceCpuThe CPU number of the module that entered this trace entry.ro
Enumeration
.1.3.6.1.4.1.333.1.12.1.1.3
cnttraceDataThe remaining 14 octets of trace information.ro
OCTET STRING
.1.3.6.1.4.1.333.1.12.1.1.4
cntMailQueue
OBJECT IDENTIFIER
.1.3.6.1.4.1.333.1.12.2
cntMDMTableA list of Message Distribution Manager (MDM) interprocessor queue global table entries.
SEQUENCE OF CntMDMEntry
.1.3.6.1.4.1.333.1.12.2.1
cntMDMEntryA Message Distribution Manager (MDM) queue global table entry.
CntMDMEntry
.1.3.6.1.4.1.333.1.12.2.1.1
cntmdmQIndexThe relative index of the MDM entry in the system's global table.ro
INTEGER
.1.3.6.1.4.1.333.1.12.2.1.1.1
cntmdmQNameThe MDM queue name for this entry in the system global table.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.12.2.1.1.2
cntmdmQProcessIdThe MDM processor number for this entry in the system global table.ro
INTEGER
.1.3.6.1.4.1.333.1.12.2.1.1.3
cntmdmQTaskIdThe MDM task identifier for this entry in the system global table.ro
INTEGER
.1.3.6.1.4.1.333.1.12.2.1.1.4
cntmdmQListThe MDM queue name list in one long string.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.12.2.2
cntdlNumberThe number of network data link layers present on this system.ro
INTEGER
.1.3.6.1.4.1.333.1.13.1
cntdlTableA list of data link layer entries. The number of entries is given by the value of cntdlNumber.
SEQUENCE OF CntDLEntry
.1.3.6.1.4.1.333.1.13.2
cntdlEntryA data link layer entry containing objects for a particular data link layer.
CntDLEntry
.1.3.6.1.4.1.333.1.13.2.1
cntdlIndexA unique value for each data link layer. It's value ranges between one and the value of dlNumber. The value for each data link layer must remain constant at least from one reinitialization of the entity's network management system to the next reinitialization.ro
INTEGER
.1.3.6.1.4.1.333.1.13.2.1.1
cntdlDescrA textual string containing information about the data link layer. This string should include the name of the manufacturer, the product name and the version of the data link layer.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.13.2.1.2
cntdlTypeThe type of this data link layer.ro
Enumeration
.1.3.6.1.4.1.333.1.13.2.1.3
cntdlTypeofServiceThe type of this data link layer service.ro
Enumeration
.1.3.6.1.4.1.333.1.13.2.1.4
cntdlMtuThe size of the largest datagram which can be sent/received on this data link layer, specified in octets.ro
INTEGER
.1.3.6.1.4.1.333.1.13.2.1.5
cntdlPortAddrLenThe length of all port addresses used by this data link layer service.ro
INTEGER
.1.3.6.1.4.1.333.1.13.2.1.6
cntdlMaxPortThe maximum number of ports supported by this data link layer service.ro
INTEGER
.1.3.6.1.4.1.333.1.13.2.1.7
cntdlActivePortThe current number of active ports.ro
INTEGER
.1.3.6.1.4.1.333.1.13.2.1.8
cntdlInOctetsThe total number of octets received on this data link layer.ro
Counter
.1.3.6.1.4.1.333.1.13.2.1.9
cntdlInUcastPktsThe number of unicast packets delivered to a higher layer protocol.ro
Counter
.1.3.6.1.4.1.333.1.13.2.1.10
cntdlInNUcastPktsThe number of non-unicast packets delivered to a higher layer protocol.ro
Counter
.1.3.6.1.4.1.333.1.13.2.1.11
cntdlInDiscardsThe number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher layer protocol.ro
Counter
.1.3.6.1.4.1.333.1.13.2.1.12
cntdlInErrorsThe number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.ro
Counter
.1.3.6.1.4.1.333.1.13.2.1.13
cntdlInUnknownProtosThe number of packets received via the data link layer which were discareded because of an unknown or unsupported protocol.ro
Counter
.1.3.6.1.4.1.333.1.13.2.1.14
cntdlOutOctetsThe total number of octets transmitted by this this data link layer service.ro
Counter
.1.3.6.1.4.1.333.1.13.2.1.15
cntdlOutUcastPktsThe total number of packets that higher-level protocols requested be transmitted to a unicast address, including those that were discarded or not sent.ro
Counter
.1.3.6.1.4.1.333.1.13.2.1.16
cntdlOutNUcastPktsThe total number of packets that higher-level protocols requested be transmitted to a non-unicast address, including those that were discarded or not sent.ro
Counter
.1.3.6.1.4.1.333.1.13.2.1.17
cntdlOutDiscardsThe number of outbound packets which were chose to be discarded even though no errors had been detected to prevent their being transmitted.ro
Counter
.1.3.6.1.4.1.333.1.13.2.1.18
cntdlOutErrorsThe number of outbound packets that could not be transmitted because of errors.ro
Counter
.1.3.6.1.4.1.333.1.13.2.1.19
cntdlOutQLenThe length of the output packet queue, in packets.ro
Gauge
.1.3.6.1.4.1.333.1.13.2.1.20
cntdlPortTableA list of data link layer entries. The number of entries is given by the value of dlActivePorts.
SEQUENCE OF CntDLPortEntry
.1.3.6.1.4.1.333.1.13.2.1.21
cntdlPortEntryA data link layer entry containing objects for a particular port.
CntDLPortEntry
.1.3.6.1.4.1.333.1.13.2.1.21.1
cntdlPortIndexThe port entry's index.ro
INTEGER
.1.3.6.1.4.1.333.1.13.2.1.21.1.1
cntdlStateThe state of this port.ro
Enumeration
.1.3.6.1.4.1.333.1.13.2.1.21.1.2
cntdlSourcePortThe source port number.ro
INTEGER
.1.3.6.1.4.1.333.1.13.2.1.21.1.3
cntdlDestPortThe destination port number.ro
INTEGER
.1.3.6.1.4.1.333.1.13.2.1.21.1.4
cntdlPortTypeThe port type. This value is not redundant to dlType since a link layer service may support multiple port types. For example, LLC1 has both llc1 and snap ports.ro
Enumeration
.1.3.6.1.4.1.333.1.13.2.1.21.1.5
cntllc1
OBJECT IDENTIFIER
.1.3.6.1.4.1.333.1.13.3
cntllc1ConfigTableA list of the LLC1 configuration entries.
SEQUENCE OF CntLLC1ConfigEntry
.1.3.6.1.4.1.333.1.13.3.1
cntllc1ConfigEntryA LLC1 configuration entry.
CntLLC1ConfigEntry
.1.3.6.1.4.1.333.1.13.3.1.1
cntllc1ConfigIndexThe index that uniquely identifies an instance of a LLC1 process in a CNT node.ro
INTEGER
.1.3.6.1.4.1.333.1.13.3.1.1.1
cntllc1DriverTypeThe physical layer device driver type that has identified to this llc1 service.ro
Enumeration
.1.3.6.1.4.1.333.1.13.3.1.1.2
cntllc1AddrThe MAC address for the physical layer over which this link layer is operating.ro
OCTET STRING
.1.3.6.1.4.1.333.1.13.3.1.1.3
cntllc1InitFlagThe initialization flag indicating whether or not this module has finished initializing the data link layer stack.ro
Enumeration
.1.3.6.1.4.1.333.1.13.3.1.1.4
cntllc1TraceFlagThe trace flags in bit-oriented form. The values are as follows: .... ...1 - phase 2 entry point .... ..1. - phase 3 entry point .... .1.. - messages in .... 1... - transmit completions ...1 .... - messages received ..1. .... - message to a ULP.ro
INTEGER
.1.3.6.1.4.1.333.1.13.3.1.1.5
cntllc1BufCntThe number of free buffers in the free pool.ro
INTEGER
.1.3.6.1.4.1.333.1.13.3.1.1.6
cntllc1BusIdThe bus number for this network interface.ro
INTEGER
.1.3.6.1.4.1.333.1.13.3.1.1.7
cntllc1CpuNumThe CPU number where this data link layer is running, 1 through 8.ro
Enumeration
.1.3.6.1.4.1.333.1.13.3.1.1.8
cntllc1BufPriorityThe assigned buffer priority for messages received from the physical layer.ro
INTEGER
.1.3.6.1.4.1.333.1.13.3.1.1.9
cntllc1WaitTimeOutThe wait timeout in seconds for XID/TEST frames sent to a peer llc1 data link layer.ro
INTEGER
.1.3.6.1.4.1.333.1.13.3.1.1.10
cntllc1StatsTableA list of LLC1 statistics entries.
SEQUENCE OF CntLLC1StatsEntry
.1.3.6.1.4.1.333.1.13.3.2
cntllc1StatsEntryA LLC1 statistics entry.
CntLLC1StatsEntry
.1.3.6.1.4.1.333.1.13.3.2.1
cntllc1StatIndexThe index that uniquely identifies an instance of a LLC1 process in a CNT node.ro
INTEGER
.1.3.6.1.4.1.333.1.13.3.2.1.1
cntllc1InXidsThe number of LLC XID frames received from a peer data link layer.ro
Counter
.1.3.6.1.4.1.333.1.13.3.2.1.2
cntllc1InTestsThe number of LLC TEST frames received from a peer data link layer.ro
Counter
.1.3.6.1.4.1.333.1.13.3.2.1.3
cntllc1InUIsThe number of LLC UI frames received from a peer data link layer.ro
Counter
.1.3.6.1.4.1.333.1.13.3.2.1.4
cntllc1InNoDsapsThe number of unknown DSAPs received from a peer data link layer.ro
Counter
.1.3.6.1.4.1.333.1.13.3.2.1.5
cntllc1InXidOksThe number of successful LLC XID frames from a peer data link layer.ro
Counter
.1.3.6.1.4.1.333.1.13.3.2.1.6
cntllc1InTestOksThe number of successful LLC TEST frames from a peer data link layer.ro
Counter
.1.3.6.1.4.1.333.1.13.3.2.1.7
cntllc1InSnapIpsThe number of SNAP IP packets received from a peer SNAP.ro
Counter
.1.3.6.1.4.1.333.1.13.3.2.1.8
cntllc1InSnapArpsThe number of SNAP ARP packets received from a peer SNAP.ro
Counter
.1.3.6.1.4.1.333.1.13.3.2.1.9
cntllc1InSnapNoProtsThe number of unknown SNAP protocols received from a peer SNAP.ro
Counter
.1.3.6.1.4.1.333.1.13.3.2.1.10
cntllc1InSnapNoTypesThe number of unknown SNAP ethertypes received from a peer SNAP.ro
Counter
.1.3.6.1.4.1.333.1.13.3.2.1.11
cntllc1OutSnapIpsThe number of SNAP IP packets sent to a peer SNAP.ro
Counter
.1.3.6.1.4.1.333.1.13.3.2.1.12
cntllc1OutSnapArpsThe number of SNAP ARP packets sent to a peer SNAP.ro
Counter
.1.3.6.1.4.1.333.1.13.3.2.1.13
cntllc1OutXidsThe number of LLC XID requests sent to a peer data link layer.ro
Counter
.1.3.6.1.4.1.333.1.13.3.2.1.14
cntllc1OutXidRespsThe number of LLC XID responses received from a peer data link layer.ro
Counter
.1.3.6.1.4.1.333.1.13.3.2.1.15
cntllc1OutTestsThe number of LLC TEST requests sent to a peer data link layer.ro
Counter
.1.3.6.1.4.1.333.1.13.3.2.1.16
cntllc1OutTestRespsThe number of LLC TEST responses sent to a peer data link layer.ro
Counter
.1.3.6.1.4.1.333.1.13.3.2.1.17
cntllc1OutRetOksThe number of packets passed successfully to the physical layer.ro
Counter
.1.3.6.1.4.1.333.1.13.3.2.1.18
cntllc1OutFragPktsThe number of packet sent with fragments.ro
Counter
.1.3.6.1.4.1.333.1.13.3.2.1.19
cntllc1ErrorTableA list of LLC1 error entries.
SEQUENCE OF CntLLC1ErrorEntry
.1.3.6.1.4.1.333.1.13.3.3
cntllc1ErrorEntryA LLC1 error entry.
CntLLC1ErrorEntry
.1.3.6.1.4.1.333.1.13.3.3.1
cntllc1ErrorIndexThe index that uniquely identifies an instance of a LLC1 process in a CNT node.ro
INTEGER
.1.3.6.1.4.1.333.1.13.3.3.1.1
cntllc1ArpMailErrsThe number of errors encountered when mailing to ARP.ro
Counter
.1.3.6.1.4.1.333.1.13.3.3.1.2
cntllc1IpMailErrsThe number of errors encountered when mailing to IP.ro
Counter
.1.3.6.1.4.1.333.1.13.3.3.1.3
cntllc1OutXmitErrsThe number of times and error was received from the physical layer when a transmission was attempted by this data link layer.ro
Counter
.1.3.6.1.4.1.333.1.13.3.3.1.4
cntllc1OutMcastErrsThe number of times and error was received from the physical layer when a multicast message was attempted by this data link layer.ro
Counter
.1.3.6.1.4.1.333.1.13.3.3.1.5
cntllc1XidErrsThe number of times and error was received from the physical layer when an LLC XID message was attempted by this data link layer.ro
Counter
.1.3.6.1.4.1.333.1.13.3.3.1.6
cntllc1TestErrsThe number of times and error was received from the physical layer when an LLC TEST message was attempted by this data link layer.ro
Counter
.1.3.6.1.4.1.333.1.13.3.3.1.7
cntllc1InBadTypesThe number of messages received from a peer data link layer with invalid or unsupported LLC type fields.ro
Counter
.1.3.6.1.4.1.333.1.13.3.3.1.8
cntllc1OutMismIpSizesThe number of messages received from a ULP that has an included IP header that indicates the message size is smaller than the actual size of the message.ro
Counter
.1.3.6.1.4.1.333.1.13.3.3.1.9
cntllc1OutBadIpSizesThe number of messages received from a ULP that has an included IP header that indicates the message size is larger than the actual size of the message.ro
Counter
.1.3.6.1.4.1.333.1.13.3.3.1.10
cntllc1InMismIpSizesThe number of messages received from a physical layer that has an included IP header that indicates the message size is smaller than the actual size of the message.ro
Counter
.1.3.6.1.4.1.333.1.13.3.3.1.11
cntllc1InBadIpSizesThe number of messages received from a physical layer that has an included IP header that indicates the message size is larger than the actual size of the message.ro
Counter
.1.3.6.1.4.1.333.1.13.3.3.1.12
cntllc1InLateXidsThe number of times an LLC XID request was sent to a peer data link layer and the return reponse was late or invalid.ro
Counter
.1.3.6.1.4.1.333.1.13.3.3.1.13
cntllc1InLateTestsThe number of times an LLC TEST request was sent to a peer data link layer and the return reponse was late or invalid.ro
Counter
.1.3.6.1.4.1.333.1.13.3.3.1.14
cntllc1OutTooBigsThe number of times this link layer service could not build the outgoing message due to a Maximum Transmission Unit (MTU) limitation.ro
Counter
.1.3.6.1.4.1.333.1.13.3.3.1.15
cntllc1OutNoRoomsThe number of times this data link layer service could not build the outgoing message due to lack of space in the s_message area of the buffer.ro
Counter
.1.3.6.1.4.1.333.1.13.3.3.1.16
cntllc1OutRetBadsThe number of times the physical layer returned an error upon return of the message to this data link layer service.ro
Counter
.1.3.6.1.4.1.333.1.13.3.3.1.17
cntlua
OBJECT IDENTIFIER
.1.3.6.1.4.1.333.1.14
cntLuaCountThe number of Logical Unit Adaptors (LUAs) present on this system.ro
INTEGER
.1.3.6.1.4.1.333.1.14.1
cntLuaTableA list of entries describing an individual Logical Unit Adaptor (LUA). A specific lua object is terminated with the channel number.
SEQUENCE OF CntLuaEntry
.1.3.6.1.4.1.333.1.14.2
cntluaEntryAn individual LUA entry.
CntLuaEntry
.1.3.6.1.4.1.333.1.14.2.1
cntluaIfThe corresponding SNMP interface index for this LUA.ro
INTEGER
.1.3.6.1.4.1.333.1.14.2.1.1
cntluaNumberThe LUA number (0-255).ro
INTEGER
.1.3.6.1.4.1.333.1.14.2.1.2
cntSubChanCountThe number of subchannels on the LUA (0-255).ro
INTEGER
.1.3.6.1.4.1.333.1.14.2.1.3
cntSubChanTableA list of entries describing an individual subchannel. A specific subchannel object is referenced from the LUA table with instance object identifiers .lua.subchannel.
SEQUENCE OF CntSubchanEntry
.1.3.6.1.4.1.333.1.14.2.1.4
cntsubchanEntryAn individual subchannel entry.
CntSubchanEntry
.1.3.6.1.4.1.333.1.14.2.1.4.1
cntsctIndexThe relative subchannel index for this lua.ro
INTEGER
.1.3.6.1.4.1.333.1.14.2.1.4.1.1
cntsctNumberThe sub-channel number (0-255).ro
INTEGER
.1.3.6.1.4.1.333.1.14.2.1.4.1.2
cntsctTxStatusBit value for the transmit status. Bit Definition 0 Transmit to be cancelled 4 Transmit in operation 8 Buffer available to subchannel 9 Subchannel ready to accept POST_XMITsro
INTEGER
.1.3.6.1.4.1.333.1.14.2.1.4.1.3
cntsctRxStatusBit value for the receive status. Bit Definition 0 Receive operation begun from host 1 Receive enabled/disabled 2 Cancel current receive message sequence 3 Pending associated data sequence 4 Request transport error notificationro
INTEGER
.1.3.6.1.4.1.333.1.14.2.1.4.1.4
cntsctSubChanStatusBit value for the device subchannel status. Bit Definition 0 Subchannel is allocated 1 Subchannel is established 2 Subchannel is sharable 3 Subchannel has dedicated buffers 4 Subchannel has pending completion 5 Subchannel has xmit multiple from user 6 Subchannel has receive multiple from user 7 Subchannel has buffer not available condition 8 Subchannel reason for no buffer (0=no credit; 1=no buffers) 9 Subchannel has network level doing flow control 10 Subchannel has pending connect 11 Subchannel has transmitted disconnect 12 Subchannel ignores buffer not available condition 13 Subchannel support Bus0 if not set, Bus1 if set 14 Subchannel has possible error during data transfer 15 Subchannel is allocatedro
INTEGER
.1.3.6.1.4.1.333.1.14.2.1.4.1.5
cntsctStateBit value for the subchannel state. Bit Definition 0 Wait flag 1 Subchannel busy 2 Pending command retry 3 Pending completion status 4 Pending unsolicited status 6 Status stacked 7 Damage control active flagro
INTEGER
.1.3.6.1.4.1.333.1.14.2.1.4.1.6
cntsctRxCreditCurrent receive buffer credit.ro
INTEGER
.1.3.6.1.4.1.333.1.14.2.1.4.1.7
cntsctRxMsgsReceive message count.ro
Counter
.1.3.6.1.4.1.333.1.14.2.1.4.1.8
cntsctRxMsgBytesReceive message byte count.ro
Counter
.1.3.6.1.4.1.333.1.14.2.1.4.1.9
cntsctRxDataBytesReceive data byte count.ro
Counter
.1.3.6.1.4.1.333.1.14.2.1.4.1.10
cntsctTxMsgsTransmit message count.ro
Counter
.1.3.6.1.4.1.333.1.14.2.1.4.1.11
cntsctTxMsgBytesTransmit message byte count.ro
Counter
.1.3.6.1.4.1.333.1.14.2.1.4.1.12
cntsctTxDataBytesTransmit data byte count.ro
Counter
.1.3.6.1.4.1.333.1.14.2.1.4.1.13
cntsctTxErrMsgsTransmit error message count.ro
Counter
.1.3.6.1.4.1.333.1.14.2.1.4.1.14
cntsctTotalBytesTotal number of bytes transmitted and received for this subchannel.ro
Counter
.1.3.6.1.4.1.333.1.14.2.1.4.1.15
cntsctDrecPidChannel PID name.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.14.2.1.4.1.16
cntsctDrecTaskDevice specific driver task name.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.333.1.14.2.1.4.1.17
CNTAU-MIB - SNMP MIB Reference | MIBs Explorer