CISCO-RHINO-MIB
AI MIB Summary
The CISCO-RHINO-MIB facilitates SNMP monitoring and management of Cisco LS1010 Layer 3 Switches by defining specific sub-modules, processor generations, and power supply types (including 175W AC units) for the device's hardware inventory and notification groups.
-Added enum sixPortDS3 for ciscoLS1010SubModuleType.
-Added enum nodeSwitchProcessor2ndGeneration for
ciscoLS1010ModuleType.
-Added enum ac175W for psType.
-Added Group object for Notification objects.
114
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
114 total| Object Name |
|---|
ciscoLS1010ChassisMIB OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11 |
RFC1155-SMI Unknown .1.3.6.1.4.1.9.5.11 |
ciscoLS1010ChassisMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.1 |
ciscoLS1010ChassisGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.1.1 |
ciscoLS1010ChassisSysTypeThe chassis system type.ro Enumeration .1.3.6.1.4.1.9.5.11.1.1.1 |
ciscoLS1010ChassisBkplTypeThe chassis backplane type.ro Enumeration .1.3.6.1.4.1.9.5.11.1.1.2 |
ciscoLS1010ChassisPs0TypeType of power supply number 1.ro PsType -- Rsyntax INTEGER { -- ?? enum value of zero may cause problems -- powerone(0), -- astec(1), -- minus48VDC(2), -- empty(3), -- ac1100W(4), -- ac1200W(5), -- dc1200W(6), -- pem(7), -- ac1360W(8), -- dc1360W(9), -- ac2000W(10), -- dc2000W(11), -- acpem(12), -- ac175W(13) -- } .1.3.6.1.4.1.9.5.11.1.1.3 |
ciscoLS1010ChassisPs0AdminStatusEnable or disable power supply 1.rw AdminStatus -- Rsyntax INTEGER { -- enable(1), -- disable(2), -- reset(3) -- } .1.3.6.1.4.1.9.5.11.1.1.4 |
ciscoLS1010ChassisPs0StatusStatus of power supply number 1.ro OperStatus -- Rsyntax INTEGER { -- unknown(1), -- ok(2), -- fault(3), -- fanAlarm(4), -- partialFault(5), -- empty(6) -- } .1.3.6.1.4.1.9.5.11.1.1.5 |
ciscoLS1010ChassisPs0LedLED Status of power supply number 1.ro Led -- Rsyntax INTEGER { -- off(1), -- green(2), -- red(3), -- yellow(4), -- blinkgreen(5), -- blinkyellow(6), -- blinkred(7), -- unknown(8) -- } .1.3.6.1.4.1.9.5.11.1.1.6 |
ciscoLS1010ChassisPs1TypeType of power supply number 2.ro PsType -- Rsyntax INTEGER { -- ?? enum value of zero may cause problems -- powerone(0), -- astec(1), -- minus48VDC(2), -- empty(3), -- ac1100W(4), -- ac1200W(5), -- dc1200W(6), -- pem(7), -- ac1360W(8), -- dc1360W(9), -- ac2000W(10), -- dc2000W(11), -- acpem(12), -- ac175W(13) -- } .1.3.6.1.4.1.9.5.11.1.1.7 |
ciscoLS1010ChassisPs1AdminStatusEnable or disable power supply 2.rw AdminStatus -- Rsyntax INTEGER { -- enable(1), -- disable(2), -- reset(3) -- } .1.3.6.1.4.1.9.5.11.1.1.8 |
ciscoLS1010ChassisPs1StatusStatus of power supply number 2.ro OperStatus -- Rsyntax INTEGER { -- unknown(1), -- ok(2), -- fault(3), -- fanAlarm(4), -- partialFault(5), -- empty(6) -- } .1.3.6.1.4.1.9.5.11.1.1.9 |
ciscoLS1010ChassisPs1LedLED Status of power supply number 2.ro Led -- Rsyntax INTEGER { -- off(1), -- green(2), -- red(3), -- yellow(4), -- blinkgreen(5), -- blinkyellow(6), -- blinkred(7), -- unknown(8) -- } .1.3.6.1.4.1.9.5.11.1.1.10 |
ciscoLS1010ChassisFanStatusStatus of the chassis fan.ro OperStatus -- Rsyntax INTEGER { -- unknown(1), -- ok(2), -- fault(3), -- fanAlarm(4), -- partialFault(5), -- empty(6) -- } .1.3.6.1.4.1.9.5.11.1.1.11 |
ciscoLS1010ChassisFanLedLED Status of fan.ro Led -- Rsyntax INTEGER { -- off(1), -- green(2), -- red(3), -- yellow(4), -- blinkgreen(5), -- blinkyellow(6), -- blinkred(7), -- unknown(8) -- } .1.3.6.1.4.1.9.5.11.1.1.12 |
ciscoLS1010ChassisCardStatusLedLED Status of CPU card.ro Led -- Rsyntax INTEGER { -- off(1), -- green(2), -- red(3), -- yellow(4), -- blinkgreen(5), -- blinkyellow(6), -- blinkred(7), -- unknown(8) -- } .1.3.6.1.4.1.9.5.11.1.1.13 |
ciscoLS1010ChassisEnetLinkLedEthernet link status LED of CPU card.ro Led -- Rsyntax INTEGER { -- off(1), -- green(2), -- red(3), -- yellow(4), -- blinkgreen(5), -- blinkyellow(6), -- blinkred(7), -- unknown(8) -- } .1.3.6.1.4.1.9.5.11.1.1.14 |
ciscoLS1010Chassis12VoltStatusThe chassis 12V status.ro Enumeration .1.3.6.1.4.1.9.5.11.1.1.15 |
ciscoLS1010ChassisTempStatusThe chassis temperature status.
The values of minorWarning(3), majorWarning(4) and
criticalWarning(5) will be primarily used by C6400
to indicate the core temperature. C6400 will never
report overTemperature(2) status.
In C6400 there are two temperature sensors: core
and inlet. C6400 use this object to represent the
core temperature and the other object
ciscoLS1010ChassisInletTempStatus to represent the
inlet temperature.ro Enumeration .1.3.6.1.4.1.9.5.11.1.1.16 |
ciscoLS1010ChassisPcmciaSlot0TypeType of PCMCIA slot 0 type.ro PcmciaType -- Rsyntax INTEGER { -- unknown(1), -- empty(2), -- flash(3), -- disk(4) -- } .1.3.6.1.4.1.9.5.11.1.1.17 |
ciscoLS1010ChassisPcmciaSlot1TypeType of PCMCIA slot 1 type.ro PcmciaType -- Rsyntax INTEGER { -- unknown(1), -- empty(2), -- flash(3), -- disk(4) -- } .1.3.6.1.4.1.9.5.11.1.1.18 |
ciscoLS1010ChassisNumSlotsThe number of slots in the chassis for plug-in modules.ro INTEGER .1.3.6.1.4.1.9.5.11.1.1.19 |
ciscoLS1010ChassisLastChangeThe last time chassis physical content get changed.ro TimeStamp -- Rsyntax TimeTicks .1.3.6.1.4.1.9.5.11.1.1.20 |
ciscoLS1010ChassisFailureActionThe action to take when there is any chassis failure,
which includes either power supply, voltage,
temperature and fan failure.rw Enumeration .1.3.6.1.4.1.9.5.11.1.1.21 |
ciscoLS1010ChassisChangeActionThe action to take when there is any chassis change,
which includes either power supply, fan and boards.rw Enumeration .1.3.6.1.4.1.9.5.11.1.1.22 |
ciscoLS1010ChassisClockingModeThe clocking mode of the ls1010 system. By default,
the mode is non-revertive, which means that the clock
will stick to the current priority, even though higher
priority clock is available.rw Enumeration .1.3.6.1.4.1.9.5.11.1.1.23 |
ciscols1010SystemClockSourceStatusThe network clock source status of 'system' source:
'notSelected' indicates 'system' not selected as the
network clock source.
'selected' indicates ASP freerunning(system) is selected as
network clock source.ro Enumeration .1.3.6.1.4.1.9.5.11.1.1.24 |
ciscols1010SystemClockSourcePriorityThe highest priority at which 'system' is configured as
a network clock source.rw Enumeration .1.3.6.1.4.1.9.5.11.1.1.25 |
ciscoLS1010ChassisInletTempStatusC6400 has two temperature sensors: core and
inlet. C6400 use this object to represent the
inlet temperature and use the object
ciscoLS1010ChassisTempStatus to represent the
core temperature.ro Enumeration .1.3.6.1.4.1.9.5.11.1.1.26 |
ciscoLS1010ModuleGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.1.2 |
ciscoLS1010ModuleTableA list of module entries. The number of entries is
given by the value of ciscoLS1010ChassisNumSlots. SEQUENCE OF CiscoLS1010ModuleEntry .1.3.6.1.4.1.9.5.11.1.2.1 |
ciscoLS1010ModuleEntryEntry containing information about one module in a
slot of the chassis. CiscoLS1010ModuleEntry .1.3.6.1.4.1.9.5.11.1.2.1.1 |
ciscoLS1010ModuleIndexA unique value for each module. INTEGER .1.3.6.1.4.1.9.5.11.1.2.1.1.1 |
ciscoLS1010ModuleTypeThe type of module.ro Enumeration .1.3.6.1.4.1.9.5.11.1.2.1.1.2 |
ciscoLS1010ModuleSerialNumberThe serial number of the module.
Deprecated in favor of object
ciscoLS1010ModuleSerialNumberString. This object
returns 0 for modules using an alphanumeric
numbering scheme.rodeprecated INTEGER .1.3.6.1.4.1.9.5.11.1.2.1.1.3 |
ciscoLS1010ModuleHwVersionThe hardware version of the module.ro INTEGER .1.3.6.1.4.1.9.5.11.1.2.1.1.4 |
ciscoLS1010ModuleSwVersionThe software version number.ro INTEGER .1.3.6.1.4.1.9.5.11.1.2.1.1.5 |
ciscoLS1010ModuleDescrA descriptive string used by the agent
to describe the module.ro DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.5.11.1.2.1.1.6 |
ciscoLS1010ModuleNumSubModulesThe max number of sub-modules supported by this module.ro INTEGER .1.3.6.1.4.1.9.5.11.1.2.1.1.7 |
ciscoLS1010ModuleAdminStatusThis object, when read, always returns a value of
ok(1). Setting this object to one of the
acceptable values gives the following results:
reset: reset the module's control logic
enable: enable the module
disable: disable the module
Setting this object to any other values results in
an error.rw AdminStatus -- Rsyntax INTEGER { -- enable(1), -- disable(2), -- reset(3) -- } .1.3.6.1.4.1.9.5.11.1.2.1.1.8 |
ciscoLS1010ModuleOperStatusOperational status of the module.ro OperStatus -- Rsyntax INTEGER { -- unknown(1), -- ok(2), -- fault(3), -- fanAlarm(4), -- partialFault(5), -- empty(6) -- } .1.3.6.1.4.1.9.5.11.1.2.1.1.9 |
ciscoLS1010ModuleHwVersionMinorThe minor hardware version of the module.ro Gauge .1.3.6.1.4.1.9.5.11.1.2.1.1.10 |
ciscoLS1010ModuleSerialNumberStringThe serial number of the module.ro DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.5.11.1.2.1.1.11 |
ciscoLS1010SubModuleGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.1.3 |
ciscoLS1010SubModuleTableA list of sub-module entries. The number of entries is
given by the value of ciscoLS1010SlotNumSubModules. SEQUENCE OF CiscoLS1010SubModuleEntry .1.3.6.1.4.1.9.5.11.1.3.1 |
ciscoLS1010SubModuleEntryEntry containing information about one sub-module in a
sub-slot of the module. CiscoLS1010SubModuleEntry .1.3.6.1.4.1.9.5.11.1.3.1.1 |
ciscoLS1010SubModuleIndexA unique value for each sub-module within the module.
This value is determined by sub-slot number where the
sub-module is inserted. INTEGER .1.3.6.1.4.1.9.5.11.1.3.1.1.1 |
ciscoLS1010SubModuleTypeThe type of sub-module.ro Enumeration .1.3.6.1.4.1.9.5.11.1.3.1.1.2 |
ciscoLS1010SubModuleSerialNumberThe serial number of the sub-module.
Deprecated in favor of object
ciscoLS1010SubModuleSerialNumberString. This
object returns 0 for submodules using
an alphanumeric numbering scheme.rodeprecated INTEGER .1.3.6.1.4.1.9.5.11.1.3.1.1.3 |
ciscoLS1010SubModuleHwVersionThe major hardware version of the sub-module.
Together with ciscoLS1010SubModuleHwVersionMinor,
this completely specifies the hardware version of
the sub-module.ro INTEGER .1.3.6.1.4.1.9.5.11.1.3.1.1.4 |
ciscoLS1010SubModuleSwVersionThe software version number.ro INTEGER .1.3.6.1.4.1.9.5.11.1.3.1.1.5 |
ciscoLS1010SubModuleDescrA descriptive string used by the agent
to describe the module.ro DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.5.11.1.3.1.1.6 |
ciscoLS1010SubModuleNumPortsThe maximum number of ports supported by
this sub-module.ro INTEGER .1.3.6.1.4.1.9.5.11.1.3.1.1.7 |
ciscoLS1010SubModuleAdminStatusThis object can be read/written as reset or ok.rw Enumeration .1.3.6.1.4.1.9.5.11.1.3.1.1.8 |
ciscoLS1010SubModuleHwVersionMinorThe minor hardware version of the sub-module.
Together with ciscoLS1010SubModuleHwVersion,
this completely specifies the hardware version of
the sub-module.ro INTEGER .1.3.6.1.4.1.9.5.11.1.3.1.1.9 |
ciscoLS1010SubModuleOperStatusOperational status of the submodule.ro OperStatus -- Rsyntax INTEGER { -- unknown(1), -- ok(2), -- fault(3), -- fanAlarm(4), -- partialFault(5), -- empty(6) -- } .1.3.6.1.4.1.9.5.11.1.3.1.1.10 |
ciscoLS1010SubModuleSerialNumberStringThe serial number of the sub-module.ro DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.5.11.1.3.1.1.11 |
ciscoLS1010PortGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.1.4 |
ciscoLS1010PortTableA list of port entries. The number of entries is
determined by the number of modules in the chassis,
the number of sub-module in the module
and the number of ports on each sub-module. SEQUENCE OF CiscoLS1010PortEntry .1.3.6.1.4.1.9.5.11.1.4.1 |
ciscoLS1010PortEntryEntry containing information for a particular port on
a sub-module. CiscoLS1010PortEntry .1.3.6.1.4.1.9.5.11.1.4.1.1 |
ciscoLS1010PortIndexAn index value that uniquely identifies this port within
a sub-module. The value is determined by the location of
the port on the sub-module. Valid entries are 1 to the
value of subModuleNumPorts for this sub-module. INTEGER .1.3.6.1.4.1.9.5.11.1.4.1.1.1 |
ciscoLS1010PortIfIndexThe ifIndex value assigned to this port.ro InterfaceIndex -- Rsyntax INTEGER .1.3.6.1.4.1.9.5.11.1.4.1.1.2 |
ciscoLS1010CpuSwitchGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.1.5 |
ciscoAtmCpuAdminStatusReset will reload the CPU board.rw Enumeration .1.3.6.1.4.1.9.5.11.1.5.1 |
ciscoAtmSwitchTotalBufferThe total cell buffer count in switch's shared memory.ro INTEGER .1.3.6.1.4.1.9.5.11.1.5.2 |
ciscoAtmSwitchFreeBufferThe free cell buffer count in switch's shared memory.ro Gauge .1.3.6.1.4.1.9.5.11.1.5.3 |
ciscoAtmSwitchDiscardCellsThe total discarded cells of the switch.ro Counter .1.3.6.1.4.1.9.5.11.1.5.4 |
ciscoAtmSwitchInvalidCellsThe total invalid cells of the switch.ro Counter .1.3.6.1.4.1.9.5.11.1.5.5 |
ciscoAtmSwitchInvalidCellHeaderTableA list of invalid cell header entries. SEQUENCE OF CiscoAtmSwitchInvalidCellHeaderEntry .1.3.6.1.4.1.9.5.11.1.5.6 |
ciscoAtmSwitchInvalidCellHeaderEntrya entry of invalid cell header. CiscoAtmSwitchInvalidCellHeaderEntry .1.3.6.1.4.1.9.5.11.1.5.6.1 |
ciscoAtmSwitchInvalidCellHeaderIndexA sequence number that identifies a invalid cell header
entry in the table. INTEGER .1.3.6.1.4.1.9.5.11.1.5.6.1.1 |
ciscoAtmSwitchInvalidCellHeaderThe most recently received invalid cells header.
octet 0 is port number (0-32),
octet 1 bit 7-5 is PTI,
octet 1 bit 4 is CLP,
octet 1 bit 3-0 is GFC,
octet 2 is VPI,
octet 3 is high byte of VCI
octet 4 is low byte of VCI.ro OCTET STRING .1.3.6.1.4.1.9.5.11.1.5.6.1.2 |
ciscoAtmCpuTerminateOamFlowTerminate all the incoming OAM cells to the CPU port.rwobsolete TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.9.5.11.1.5.7 |
ciscoAtmInterceptEndToEndOamFlowIndicates whether incoming end-to-end OAM flow
cells are sent to the switch CPU.
If the value is 'true', all incoming
end-to-end OAM flow cells, including those on
transit connections, are sent to the switch
CPU.
This value may be modified at any time. The
modified value will apply to all existing
connections.
Note that if the value is 'false', the switch
can not use the ATM PING application for
end-to-end loopback on transit connections,
since the end-to-end OAM cells on such connections
will not be seen by the switch CPU.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.9.5.11.1.5.8 |
clsEnetPortGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.1.6 |
clsEnetPortTableA list of ethernet port entries. This table
is mainly to support ethernet port only. SEQUENCE OF ClsEnetPortEntry .1.3.6.1.4.1.9.5.11.1.6.1 |
clsEnetPortEntryEntry contains information of a particular
ethernet port. ClsEnetPortEntry .1.3.6.1.4.1.9.5.11.1.6.1.1 |
clsEnetPortDuplexIndicates whether the port is operating
in half-duplex, full-duplex, or auto mode.
If the port could not agree with the far end on
port duplex, the port will be in auto(2) mode.
Unknown(1) indicates either the port does not
support duplex mode, or the duplex mode is
none of the defined.rw Enumeration .1.3.6.1.4.1.9.5.11.1.6.1.1.1 |
clsEnetPortAdminSpeedIndicates the desired speed of the port
in bits per second.
The current operational speed of the port
is determined by ifSpeed.
If the port could not agree with the far end on
port speed, the port will be in auto(2) mode,
which will force the port to transmit in speed
whichever is lower.
Unknown(1) indicates either the port does not
support admin speed, or the admin speed is
none of the defined.rw Enumeration .1.3.6.1.4.1.9.5.11.1.6.1.1.2 |
clsEnetPortTypeThe type of physical layer medium-dependent
interface on the port.
unknown(1) indicates that the port type is none of
those defined. empty(6) indicates that the port is
not present.ro Enumeration .1.3.6.1.4.1.9.5.11.1.6.1.1.3 |
clsEnetPortLinkStatusThis object indicates how the link status
of the port came up.
autoNegotiate(2)
negotiate the link with the partner port.
If successful, the link will come up,
otherwise the link will remain down.
forceUp(3)
up irrespective of its partner port. This
will bring up the link in full duplex only.
Default is autoNegotiate(2).rw Enumeration .1.3.6.1.4.1.9.5.11.1.6.1.1.4 |
clsPortLedGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.1.7 |
clsPortLedTableA list of LED entries associated with a port. SEQUENCE OF ClsPortLedEntry .1.3.6.1.4.1.9.5.11.1.7.1 |
clsPortLedEntryEntry contains information of a particular
LED associated with a particular port which
is identified by ifIndex. ClsPortLedEntry .1.3.6.1.4.1.9.5.11.1.7.1.1 |
clsPortLedIndexAn index that uniquely identifies this LED
among all the LEDs associated with the port
identified by ifIndex.
This value is related to the physical location
of the LED, and is in ascending order from
top to bottom, left to right. INTEGER .1.3.6.1.4.1.9.5.11.1.7.1.1.1 |
clsPortLedTypeIndicates the type or label of the LED.ro Enumeration .1.3.6.1.4.1.9.5.11.1.7.1.1.2 |
clsPortLedStatusIndicates the status of the LED.
Unknown(1) indicates either the LED status is
not supported or the status is none of the
defined.ro Enumeration .1.3.6.1.4.1.9.5.11.1.7.1.1.3 |
ciscoLS1010ChassisMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.2 |
ciscoLS1010ChassisMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.2.0 |
ciscoLS1010ChassisFailureNotificationAgent detects a change in the status of ps0, ps1,
fan, 12V line, and/or chassis temperature.
This notification will be generated when the status
changes from no-fault to fault, and also when the status
changes from fault to no-fault. TRAP-TYPE .1.3.6.1.4.1.9.5.11.2.0.1 |
ciscoLS1010ChassisChangeNotificationAgent detects any hot-swap component change or changes
in the chassis. TRAP-TYPE .1.3.6.1.4.1.9.5.11.2.0.2 |
ciscoLS1010ChassisMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.3 |
ciscoLS1010ChassisMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.3.1 |
ciscoLS1010ChassisMIBCompliance OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.3.1.1 |
ciscoLS1010ChassisMIBComplianceRev1 OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.3.1.2 |
ciscoLS1010ChassisMIBComplianceRev2 OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.3.1.3 |
ciscoLS1010ChassisMIBComplianceRev3 OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.3.1.4 |
ciscoLS1010ChassisMIBComplianceRev4 OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.3.1.5 |
ciscoLS1010ChassisMIBComplianceRev5 OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.3.1.6 |
ciscoLS1010ChassisMIBComplianceRev6 OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.3.1.7 |
ciscoLS1010ChassisMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.3.2 |
ciscoLS1010ChassisMIBGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.3.2.1 |
ciscoLS1010ChassisMIBObsoleteGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.3.2.2 |
ciscoLS1010ChassisMIBRev1Group OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.3.2.3 |
ciscoLS1010ChassisMIBClockingGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.3.2.4 |
ciscoLS1010ChassisMIBGroup1 OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.3.2.5 |
clsEnetPortGroup1 OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.3.2.6 |
clsPortLedGroup1 OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.3.2.7 |
clsOperStatusGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.3.2.8 |
clsInletTempGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.3.2.9 |
ciscoLS1010ChassisMIBGroup2 OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.3.2.10 |
ciscoLS1010ChassisMIBDeprecatedGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.3.2.11 |
ciscoLS1010ChassisMIBNotificationGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.5.11.3.2.12 |