CENTILLION-DOT5-EXTENSIONS-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CENTILLION-DOT5-EXTENSIONS-MIB.
13
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
13 total| Object Name |
|---|
cnDot5Extensions OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.4.3 |
IMPORTS Unknown .1.3.6.1.4.1.3764.1.1.30.4.3 |
cnDot5ExtnTableThis table contains Token Ring interface
parameters and state variables, one entry
per 802.5 interface. SEQUENCE OF CnDot5ExtnEntry .1.3.6.1.4.1.3764.1.1.30.4.3.1 |
cnDot5ExtnEntryA list of Token Ring status and parameter
values for an 802.5 interface. CnDot5ExtnEntry .1.3.6.1.4.1.3764.1.1.30.4.3.1.1 |
cnDot5ExtnIfIndexThe value of this object identifies the
802.5 interface for which this entry
contains management information. The
value of this object for a particular
interface has the same value as the
ifIndex object, defined in [4,6],
for the same interface.ro INTEGER .1.3.6.1.4.1.3764.1.1.30.4.3.1.1.1 |
cnDot5ExtnPortConnTypeThe type of connection used on this port. Setting a value
to this object requires the port to be reset and re-opened
before taking effect. Allowable connections for TR4 are:
Station - (default for TR4) the port is configured as a
standard ring station,
Ring-In/Ring-Out - the port is connected to the Ring-In
or Ring-Out port of a MAU with an
appropriate cable.
DTR - the port has a direct connection to a ring station.
A different set of connection type for TR8 are :
Hub, Station, Bay/SNPX RO, Bay/SNPX RI, Other RO,
Other RI, FDTR Hub, FDTR Stationrw TrPortConnType .1.3.6.1.4.1.3764.1.1.30.4.3.1.1.2 |
cnDot5ExtnPortSpeedSenseIndicates whether speed sensing is enabled (default),
or disabled on the port. This is used in conjuection with
the RingSpeed to either match or force to the configured
speed.rw EnableIndicator .1.3.6.1.4.1.3764.1.1.30.4.3.1.1.3 |
cnDot5ExtnAdminRingSpeedThe configured ring speed of the port. The speed will take
effect on the next opening of the ring. The speeds of
'force' indicates that the port should enter the ring
regardless of the current ring speed. The 'match' speeds
indcate the the port should insert at the configured speed,
only if the current ring speed matches the port speed.
The operational ring speed may be obtained by the usual
dot5RingSpeed object. The 'auto detect' indicates that the
ring detect and insert at the current ring speed.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.4.3.1.1.4 |
cnS5TrExtnTableThis table contains additional Token Ring interface
parameters and state variables, one entry per
802.5 interface for 5000BH token ring cards. SEQUENCE OF CnS5TrExtnEntry .1.3.6.1.4.1.3764.1.1.30.4.3.2 |
cnS5TrExtnEntryA list of Token Ring additional status and parameter
values for an 802.5 interface for 5000BH token ring
cards. CnS5TrExtnEntry .1.3.6.1.4.1.3764.1.1.30.4.3.2.1 |
cnS5TrExtnIfIndexThe value of this object identifies the
802.5 interface for which this entry
contains management information. The
value of this object for a particular
interface has the same value as the
ifIndex object, defined in [4,6],
for the same interface.ro INTEGER .1.3.6.1.4.1.3764.1.1.30.4.3.2.1.1 |
cnS5TrExtnFrontPortConnectIf enabled, front port insertion is allowed. This setting
has no meaning other than in tr8PortHub mode.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.4.3.2.1.2 |
cnS5TrExtnOperBkplaneAttThis object returns the operating backplane
attachment state of a token ring port. For the
ports that do not have backplane attachment
capability, notCapable(2) is returned.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.4.3.2.1.3 |