CENTILLION-CONFIG-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CENTILLION-CONFIG-MIB.
116
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
116 total| Object Name |
|---|
sysTableConfig OBJECT IDENTIFIER .1.3.6.1.4.1.5951.1.2.2.1 |
RFC1213-MIB Unknown .1.3.6.1.4.1.5951.1.2.2.1 |
sysImgInfo OBJECT IDENTIFIER .1.3.6.1.4.1.5951.1.2.2.2 |
sysImgGbl OBJECT IDENTIFIER .1.3.6.1.4.1.5951.1.2.2.2.1 |
sysImgGblInvokeSrcThe source of system image to be invoked at next boot.
Default setting is image1.
If the desired image cannot be invoked,
another image (if found and valid) will be invoked
automatically at next boot.
Note that if the system does not support
dual boot image, then image1 should be used.rw Enumeration .1.3.6.1.4.1.5951.1.2.2.2.1.1 |
sysImgGblLoadDstThe non volatile memory destination where
the system image will be (programmed by boot loader)
down loaded to at next boot.
Default setting is location1.
Note that if the system does not support
dual boot image, then location1 should be used.rw Enumeration .1.3.6.1.4.1.5951.1.2.2.2.1.2 |
sysImgTableA table that provides additional information
about the system images. The number of
entries in the table is determined by the
number of index of the system image. SEQUENCE OF SysImgEntry .1.3.6.1.4.1.5951.1.2.2.2.2 |
sysImgEntryA row in the table of additional information
about the system images. Entries can not
be created or deleted via SNMP requests. SysImgEntry .1.3.6.1.4.1.5951.1.2.2.2.2.1 |
sysImgIndxThe index of the system image.ro INTEGER .1.3.6.1.4.1.5951.1.2.2.2.2.1.1 |
sysImgVerThe version of the system image stored in
non volatile memory.
Note that if the system does not support
dual boot image, then zero length string
should be returned for image2.ro DisplayString .1.3.6.1.4.1.5951.1.2.2.2.2.1.2 |
sysImgStatusThe status of system image stored in non volatile memory.ro Enumeration .1.3.6.1.4.1.5951.1.2.2.2.2.1.3 |
sysMcpRedundInfo OBJECT IDENTIFIER .1.3.6.1.4.1.5951.1.2.2.3 |
sysMcpRedundGbl OBJECT IDENTIFIER .1.3.6.1.4.1.5951.1.2.2.3.1 |
sysMcpRedundNxtGblStateState of the Redundant MCP during next boot.
Request to enable or disable redundant MCP. This
will update the configuration information for the
redundant MCP pair. It takes effect during next
reset.rw Enumeration .1.3.6.1.4.1.5951.1.2.2.3.1.1 |
sysMcpRedundTableA table that provides additional information
about the system MCP redundancy. The number of
entries in the table is determined by the
number of index of the system MCP redundancy. SEQUENCE OF SysMcpRedundEntry .1.3.6.1.4.1.5951.1.2.2.3.2 |
sysMcpRedundEntryA row in the table of additional information
about the system MCP redundancy. Entries can not
be created or deleted via SNMP requests. SysMcpRedundEntry .1.3.6.1.4.1.5951.1.2.2.3.2.1 |
sysMcpRedundIndxThe index of the system MCP redundancy. Currently
represents the slot number that this MCP is in.ro INTEGER .1.3.6.1.4.1.5951.1.2.2.3.2.1.1 |
sysMcpRedundPriorityThe MCP redundancy priority which is used for primary
MCP selection. Default setting is zero.rw INTEGER .1.3.6.1.4.1.5951.1.2.2.3.2.1.2 |
sysMcpRedundTypeFunctional type of MCP in the chassis. Currently only
ATM MCPs can be used for the redundant function. Only
MCPs in slots 1 and 2 can participate in redundancy.
But other ATM MCPs can still be plugged into the chasis.
This field represents the way that an MCP is
participating in the redundancy.ro Enumeration .1.3.6.1.4.1.5951.1.2.2.3.2.1.3 |
sysMcpRedundOperStateCurrent state of this MCPro Enumeration .1.3.6.1.4.1.5951.1.2.2.3.2.1.4 |
sysMcpRedundCfgStatusState of the Redundant MCP. Other(1) is used when the
MCP is not participating in redundancy, default
enable/disable used to represent the factory default
case. User enable/disable used when a user changes
from the factory default state.ro Enumeration .1.3.6.1.4.1.5951.1.2.2.3.2.1.5 |
rifTableThis table contains Routing Information Field (RIF)
parameters. Entries may be used by one or more stations on
the switch. SEQUENCE OF RifEntry .1.3.6.1.4.1.5951.1.2.2.5 |
rifEntryA single entry in the RIF table. RifEntry .1.3.6.1.4.1.5951.1.2.2.5.1 |
rifPathRIF field, read from left to right, i.e. read from the
switch.ro OCTET STRING .1.3.6.1.4.1.5951.1.2.2.5.1.1 |
rifIndexIndex into the RIF table. This index is used to enter a
RIF in the station table.ro INTEGER .1.3.6.1.4.1.5951.1.2.2.5.1.2 |
rifInUseIndicates that this RIF entry is valid if set. A unique
RIF entry may be deleted only if it is not in use by a
station.rw BitField .1.3.6.1.4.1.5951.1.2.2.5.1.3 |
rifCountThe number stations that this RIF is associated with.ro INTEGER .1.3.6.1.4.1.5951.1.2.2.5.1.4 |
rifLengthByte length of the RIF entry.ro INTEGER .1.3.6.1.4.1.5951.1.2.2.5.1.5 |
rifNextNext RIF field.ro INTEGER .1.3.6.1.4.1.5951.1.2.2.5.1.6 |
rifPreviousPrevious RIF field.ro INTEGER .1.3.6.1.4.1.5951.1.2.2.5.1.7 |
systemMaxPacketInfoSizeThe system maximum packet information field size.
Changing the maximum information size
does not take effect until the next system reset.rw INTEGER .1.3.6.1.4.1.5951.1.2.2.6 |
systemConfigModeThis variable describes the current mode of bridging
configuration in the switch. The bridging mode applies to
all ports. The value other(1) is a read-only indication that
the system is in a user customized the system configuration.
Setting this object will save the configuration into flash
and issue a system reset command.rw Enumeration .1.3.6.1.4.1.5951.1.2.2.7 |
maxPerfModeThe current value of the system maximum performance mode.
Setting this value to enabled causes the system to
perform in maximum performance mode. Default is disabled.
This variable does not take effect until the next system
reset.rw EnableIndicator .1.3.6.1.4.1.5951.1.2.2.8 |
configSaveSave the current configuration into flash memory.
When read, this value is always clear (1). The value may only
be set to the set (2) state.rw BitField .1.3.6.1.4.1.5951.1.2.2.10 |
localAdminMacAddressThe system's locally administered MAC address. The current
operation MAC address may be obtained by the ifPhysAddress
entry in the ifTable. This parameter will take effect only
after a reset is issued.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.5951.1.2.2.12 |
configLoginThe system login object. This object is used to login
a network management station to the system for configuration.
The format of the login request follows:
login indicator.login password,
where the login indicator is a single byte of the value
1 = logoff, 2 = login, or 3 = set password and the password
is the system password. The password must be supplied for
upon login or altering the password. A manager must first
login to the system before altering the password.
When read, the first octet is returned, indicating whether
a managment station is currently logged in to the system.rw OCTET STRING .1.3.6.1.4.1.5951.1.2.2.13 |
sysNetProtocol OBJECT IDENTIFIER .1.3.6.1.4.1.5951.1.2.2.14 |
sysIpProtocol OBJECT IDENTIFIER .1.3.6.1.4.1.5951.1.2.2.14.1 |
sysAddrThe system's IP address. The current operational IP
address may be obtained by the ipAdEntAddr entry in the
ipAddrTable. This parameter will take effect only after
a reset is issued.rwdeprecated IpAddress .1.3.6.1.4.1.5951.1.2.2.14.1.1 |
sysNetMaskThe system's IP subnet mask. The current operational IP
subnet mask may be obtained by the ipAdEntNetMask entry in
the ipAddrTable. This parameter will take effect only after
a reset is issued. The parameter is not saved unless
written to flash.rwdeprecated IpAddress .1.3.6.1.4.1.5951.1.2.2.14.1.2 |
sysBcastAddrThe system's IP broadcast address. The current operational
IP broadcast address may be obtained by the ipAdEntBcastAddr
in the ipAddrTable. This parameter will take effect only after
a reset is issued. This parameter is not saved unless written
to flash.rwdeprecated IpAddress .1.3.6.1.4.1.5951.1.2.2.14.1.3 |
defaultGatewayAddrThe system's default getway IP address. the current
operational default gateway's IP address can be obtained from
the ipRoutingTable. This parameter will take effect only
after a reset is issued. This parameter is not saved unless
written to flash.rwdeprecated IpAddress .1.3.6.1.4.1.5951.1.2.2.14.1.4 |
configServerAddrThe IP address to which the requests for configuration
files are sent. The protocol used to retrieve the
configuration is determined by the configProtocol object.
This parameter may be set dynamically as established by the
ipConfigProtocol object.rw IpAddress .1.3.6.1.4.1.5951.1.2.2.14.1.5 |
ipConfigProtocolThe protocol used to obtain this IP
addressing information.rwdeprecated Enumeration .1.3.6.1.4.1.5951.1.2.2.14.1.6 |
ipHostNumberThe number of IP entities (regardless of
their current state) present on this system.ro INTEGER .1.3.6.1.4.1.5951.1.2.2.14.1.7 |
ipHostTableThis table contains all the ip entities this
agent manages. The number of entries is
given by the value of ipHostNumber. SEQUENCE OF IpHostEntry .1.3.6.1.4.1.5951.1.2.2.14.1.8 |
ipHostEntryAn IP entity entry containing objects
regarding this IP entity. IpHostEntry .1.3.6.1.4.1.5951.1.2.2.14.1.8.1 |
ipHostIndexAn index to the ipHostTable. Its value ranges
between 1 and the value of ipHostNumber.rw INTEGER .1.3.6.1.4.1.5951.1.2.2.14.1.8.1.1 |
ipHostAddressThe IP address of this entity.rw IpAddress .1.3.6.1.4.1.5951.1.2.2.14.1.8.1.2 |
ipHostNetMaskThe subnet mask associated with the Ip
address of this entry.rw IpAddress .1.3.6.1.4.1.5951.1.2.2.14.1.8.1.3 |
ipHostBcastAddrThe Broadcast address associated with the
IP address of this entry.rw IpAddress .1.3.6.1.4.1.5951.1.2.2.14.1.8.1.4 |
ipHostDefaultGatewayAddrThe gateway address associated with the IP address of
this entry.rw IpAddress .1.3.6.1.4.1.5951.1.2.2.14.1.8.1.5 |
ipHostConfigProtocolThe protocol used to obtain this IP
host's addressing information.rw Enumeration .1.3.6.1.4.1.5951.1.2.2.14.1.8.1.6 |
ipHostEnableEnable or disable of this ip host entry.rw Enumeration .1.3.6.1.4.1.5951.1.2.2.14.1.8.1.7 |
ipHostTypeA read only object indicating the type of
this IP entity.ro Enumeration .1.3.6.1.4.1.5951.1.2.2.14.1.8.1.8 |
configProtocolThe protocol used to retrieve system configuration. Flash
indicates that the configuration is read from the flash.
tftpNoSave indicates that the TFTP protocol should be used
to retrieve the current configuration. The new configuration
is not saved into flash, it is up to the user to save
the configuration is desired. The new configuration will not
take effect until the next system reset. tftpSave indicates
that the newly uploaded configuration will be saved into
flash, thus may be use to permanently update a configuration.
The system is automatically reset.rw Enumeration .1.3.6.1.4.1.5951.1.2.2.15 |
configFilenameThe name of the configuration file that is sent to the
server. The actual boot protocol used to retrieve the file
is determined by configProtocol. This parameter may be
configured via the network boot protocol.rw DisplayString .1.3.6.1.4.1.5951.1.2.2.16 |
configSourceAn indication of how the system was actually configured.
flashConfig indicates that the current configuration was
obtained via flash. remoteConfig indicates that the
configuration was obtained via the protocol determined
by configProtocol.ro Enumeration .1.3.6.1.4.1.5951.1.2.2.17 |
sysTFTPGroup OBJECT IDENTIFIER .1.3.6.1.4.1.5951.1.2.2.18 |
sysTFTPStartSetting sysTFTPStart to tftpGet(2) initiates a file
transfer to the agent (download); tftpPut(3) initiates
a file transfer to the server (upload).rw Enumeration .1.3.6.1.4.1.5951.1.2.2.18.1 |
sysTFTPIpAddressThe IP Address of the TFTP server.rw IpAddress .1.3.6.1.4.1.5951.1.2.2.18.2 |
sysTFTPFileNameThe file name of the file to retrieve (tftpGet), or the
name of the file to create (tftpPut).rw DisplayString .1.3.6.1.4.1.5951.1.2.2.18.3 |
sysTFTPFileTypeThe type of file image to upload/download. The file
type indicates to the agent what kind of file it is
receiving. configuration(1) indicates an update of the
system configuration. imageCode(2) indicates a code upgrade of
the operational proms. bootCode(3) indicates a code
upgrade of the boot proms.rw Enumeration .1.3.6.1.4.1.5951.1.2.2.18.4 |
sysTFTPResultThe result of the last TFTP operation.ro Enumeration .1.3.6.1.4.1.5951.1.2.2.18.5 |
sysSNMPGroup OBJECT IDENTIFIER .1.3.6.1.4.1.5951.1.2.2.19 |
sysSNMPGetCommunityThe system get community string.rw DisplayString .1.3.6.1.4.1.5951.1.2.2.19.1 |
sysSNMPSetCommunityThe system set community string.rw DisplayString .1.3.6.1.4.1.5951.1.2.2.19.2 |
sysSNMPEnableTrapsIndicates whether the SNMP agent process is permitted
to generate traps. This object provides global trap
enable status, as specific traps may be enabled or disabled
on an individual basis.rw EnableIndicator .1.3.6.1.4.1.5951.1.2.2.19.3 |
sysSNMPTrapIPReceiverTableA table containing of network management stations that are
to receive traps generated by the system. SEQUENCE OF SysSNMPTrapIPReceiverEntry .1.3.6.1.4.1.5951.1.2.2.19.4 |
sysSNMPTrapIPReceiverEntryA destination address and community string to a particular
IP trap server. Entries are created by supplying a valid IP
address of the trap server. SysSNMPTrapIPReceiverEntry .1.3.6.1.4.1.5951.1.2.2.19.4.1 |
trapIPRcvrAddressThe IP network address of the network management entity
which will receive traps.rw IpAddress .1.3.6.1.4.1.5951.1.2.2.19.4.1.1 |
trapIPRcvrStatusSetting this object to the value invalid(2) has the effect
of invalidating the corresponding entry in the
sysSNMPReceiverTrapTable. On a read, the value of valid(2)
is returned. Entries are added into the table by specifying
a previously unknown trapRcvrNetAddress, along with the
corresponding trapRcvrCommunity.rw StatusIndicator .1.3.6.1.4.1.5951.1.2.2.19.4.1.2 |
trapIPRcvrCommunityThe community string to use for traps sent to this trap
receiver.rw DisplayString .1.3.6.1.4.1.5951.1.2.2.19.4.1.3 |
sysMgmtRingNumberA unique ring number assigned to the system's managment
entity. This ring will not appear as a source-route hop
as it is seen only in frames destined to or sourced from
the system management entity.rw INTEGER .1.3.6.1.4.1.5951.1.2.2.20 |
netbiosGroup OBJECT IDENTIFIER .1.3.6.1.4.1.5951.1.2.2.21 |
netbiosNameTableAgingTimerThe non-zero timeout period in seconds for aging out
dynamically learned Netbios names. The default value
is 300 seconds.rw INTEGER .1.3.6.1.4.1.5951.1.2.2.21.1 |
netbiosNameQueryIntervalThe time period in hundreds of milliseconds in which
NetBIOS name queries are allowed to be bridged. A value of
0 disables briding NetBIOS name queries. The default value
is 5 (a half second).rw INTEGER .1.3.6.1.4.1.5951.1.2.2.21.2 |
netbiosNameTableFlushIf set, indicates that the NetBIOS name table should be
flushed. Flushing the table removes all of the dynamically
learned entries from the NetBIOS name table. When read,
this object always returns a value of clear.rw BitField .1.3.6.1.4.1.5951.1.2.2.21.3 |
netbiosNameTableEntryA NetBIOS name table. This table is a list of the NetBIOS
names learned or configured on the switch.deprecated SEQUENCE OF NetbiosNameEntry .1.3.6.1.4.1.5951.1.2.2.21.4 |
netbiosNameEntryA NetBIOS name table entry. Entries may be deleted by
setting the status object to invalid (2). Entries are added
by specifying the name, station and ring or card/port as
appropriate.deprecated NetbiosNameEntry .1.3.6.1.4.1.5951.1.2.2.21.4.1 |
netbiosNameNameThe NetBIOS name.rodeprecated DisplayString .1.3.6.1.4.1.5951.1.2.2.21.4.1.1 |
netbiosNameStatusThe status of the NetBIOS name entry. Setting this object to
invalid (2) causes the entry to be deleted from the name
table. The value should always be read as valid(1).rodeprecated StatusIndicator .1.3.6.1.4.1.5951.1.2.2.21.4.1.2 |
netbiosNameStationAddressThe address of the station from which this name was
learned or configured. This object must be specified when
adding an entry into the table.rodeprecated PhysAddress .1.3.6.1.4.1.5951.1.2.2.21.4.1.3 |
netbiosNameVirtualRingNumberThe virtual ring number from which the entry was learned or
configured. If the switch is operating is a mode where
virtual rings are invalid, then this number will be 0. This
object must be specified when adding an entry in the table
if appropriate.rodeprecated INTEGER .1.3.6.1.4.1.5951.1.2.2.21.4.1.4 |
netbiosNameCardNumberThe card number from which the entry was learned or
configured. If the switch is operating is a mode where
virtual rings are valid, then this number will be 0. This
object must be specified when adding an entry in the table
if appropriate.rodeprecated INTEGER .1.3.6.1.4.1.5951.1.2.2.21.4.1.5 |
netbiosNamePortNumberThe port number from which the entry was learned or
configured. If the switch is operating is a mode where
virtual rings are valid, then this number will be 0. This
object must be specified when adding an entry in the table
if appropriate.rodeprecated INTEGER .1.3.6.1.4.1.5951.1.2.2.21.4.1.6 |
netbiosNamePortTypeThe type of port from which the entry was learned or
configured.rodeprecated Enumeration .1.3.6.1.4.1.5951.1.2.2.21.4.1.7 |
netbiosNameAgeThe amount of time (in hundredths of a second) before
this entry is aged, or the elapsed time since the
entry was learned or configured.rodeprecated TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.5951.1.2.2.21.4.1.8 |
netbiosNameProxiesThe number of times that the switch has proxied for
this station.rodeprecated Counter .1.3.6.1.4.1.5951.1.2.2.21.4.1.9 |
netbiosNameSuppressedQueriesThe number of NetBIOS name queries from this station
which were suppressed by the switch due to the configured
name query interval (netbiosNameQueryInterval)rodeprecated Counter .1.3.6.1.4.1.5951.1.2.2.21.4.1.10 |
cnnetbiosNameTableEntryA NetBIOS name table with VLAN information. This table is
a list of the NetBIOS
names learned or configured on the switch. SEQUENCE OF CnnetbiosNameEntry .1.3.6.1.4.1.5951.1.2.2.21.5 |
cnnetbiosNameEntryA NetBIOS name table entry. Entries may be deleted by
setting the status object to invalid (2). Entries are added
by specifying the name, station, ring or card/port, vlan
id as appropriate. CnnetbiosNameEntry .1.3.6.1.4.1.5951.1.2.2.21.5.1 |
cnnetbiosNameNameThe NetBIOS name.ro DisplayString .1.3.6.1.4.1.5951.1.2.2.21.5.1.1 |
cnnetbiosNameStatusThe status of the NetBIOS name entry. Setting this object to
invalid (2) causes the entry to be deleted from the name
table. The value should always be read as valid(1).ro StatusIndicator .1.3.6.1.4.1.5951.1.2.2.21.5.1.2 |
cnnetbiosNameStationAddressThe address of the station from which this name was
learned or configured. This object must be specified when
adding an entry into the table.ro PhysAddress .1.3.6.1.4.1.5951.1.2.2.21.5.1.3 |
cnnetbiosNameVirtualRingNumberThe virtual ring number from which the entry was learned or
configured. If the switch is operating is a mode where
virtual rings are invalid, then this number will be 0. This
object must be specified when adding an entry in the table
if appropriate.ro INTEGER .1.3.6.1.4.1.5951.1.2.2.21.5.1.4 |
cnnetbiosNameCardNumberThe card number from which the entry was learned or
configured. If the switch is operating is a mode where
virtual rings are valid, then this number will be 0. This
object must be specified when adding an entry in the table
if appropriate.ro INTEGER .1.3.6.1.4.1.5951.1.2.2.21.5.1.5 |
cnnetbiosNamePortNumberThe port number from which the entry was learned or
configured. If the switch is operating is a mode where
virtual rings are valid, then this number will be 0. This
object must be specified when adding an entry in the table
if appropriate.ro INTEGER .1.3.6.1.4.1.5951.1.2.2.21.5.1.6 |
cnnetbiosNameVlanIdThe 802.1q vid for the VLan from which the entry was
learned or configured. This object must be specified
when adding an entry in the table if appropriate.ro VlanId .1.3.6.1.4.1.5951.1.2.2.21.5.1.7 |
cnnetbiosNamePortTypeThe type of port from which the entry was learned or
configured.ro Enumeration .1.3.6.1.4.1.5951.1.2.2.21.5.1.8 |
cnnetbiosNameAgeThe amount of time (in hundredths of a second) before
this entry is aged, or the elapsed time since the
entry was learned or configured.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.5951.1.2.2.21.5.1.9 |
cnnetbiosNameProxiesThe number of times that the switch has proxied for
this station.ro Counter .1.3.6.1.4.1.5951.1.2.2.21.5.1.10 |
cnnetbiosNameSuppressedQueriesThe number of NetBIOS name queries from this station
which were suppressed by the switch due to the configured
name query interval (netbiosNameQueryInterval)ro Counter .1.3.6.1.4.1.5951.1.2.2.21.5.1.11 |
lnmGroup OBJECT IDENTIFIER .1.3.6.1.4.1.5951.1.2.2.25 |
lnmOperStatusThis object reflects the actual
state of LNM which may differ
from that of the lnmAdminStatus
object. This can occur when
the LNM task has failed but the
the corresponding lnmAdminStatus
is 'up'.ro Enumeration .1.3.6.1.4.1.5951.1.2.2.25.1 |
lnmAdminStatusThe desired state of the LNM on
the switch as prescribed by the
operator. The actions of the agent
will, if at all possible, eventually
result in the desired state being
reflected in the lnmOperStatus.rw Enumeration .1.3.6.1.4.1.5951.1.2.2.25.2 |
lnmBridgeGroupDisplayModeIndicates how LNM should display
spanning tree groups. If set to aggregate,
LNM displays all spanning tree groups as
one internal management ring.
If set to separate, LNM displays
each spanning tree group as a separate
internal management ring.rw Enumeration .1.3.6.1.4.1.5951.1.2.2.25.3 |
lnmLinkPasswordIndicates the use of the default LNM management
password or the first 6 to 8 characters of the
system password.rw EnableIndicator .1.3.6.1.4.1.5951.1.2.2.25.4 |
sonmpTrConfigThe configuration status of the Token Ring auto-topology.
If the value of this object is set to enable(1), the
Token Ring auto-topology frames will be sent out on every
Token Ring port on every 10 seconds interval. The auto-
topology frames are received from the Token Ring port and
logged in the database. If the value of this object is
set to disable(2), no Token ring topology frames are sent
and received.rw Enumeration .1.3.6.1.4.1.5951.1.2.2.28 |
systemConfigIpOptionReading this object always returns other(1). Setting of
this object, which is optional, must be accomplished in
the same SNMP request that set systemConfigMode.rw Enumeration .1.3.6.1.4.1.5951.1.2.2.29 |
sonmpTrSpeedThe Token Ring topology message (SONMP frame)
transmit speed. The values that are read/write are:
topFast(2)...short interval between transmitting
topSlow(3)...long interval between transmitting
The value that is readonly is:
other(1)...speed unknown, or other value
In fast mode, the SONMP frame transmit interval
is 10 seconds for all SONMP frames.
In slow mode, the interval is 60 seconds for master
NMM announcement SONMP frames, and 70 seconds for
adjacent SONMP frames.rw Enumeration .1.3.6.1.4.1.5951.1.2.2.30 |
srUnknownFrameFloodUnknown Source Route Frame Flood.
Enable/Disable flooding of Source Route Frames to
the next hop while the route to the remote ring
is being learned and circuit is established.rw EnableIndicator .1.3.6.1.4.1.5951.1.2.2.32 |
srbIeeeBpduEnableSend Srb/Ieee BPDU as explorer.
Enable/Disable the sending of Srb/IEEE BPDU's as explorers,
allowing some routers to receive the BPDU with a rif.rw EnableIndicator .1.3.6.1.4.1.5951.1.2.2.33 |
tbRifProxyEnableProcess route descriptor LE_ARP requests in token ring
transparent bridging LANE. Enable/Disable the processing of
LE_ARP requests for route descriptors when received from a
source route ATM attached device.rw EnableIndicator .1.3.6.1.4.1.5951.1.2.2.34 |
cpuClkRateMCP Clock Rate.
Indicates the speed at which the MCP processor functions.ro Enumeration .1.3.6.1.4.1.5951.1.2.2.35 |
maxRidsMaximum number of Reassembly Ids.
Indicates the maximum number of RIDs the switch supports. Determined
by the XRam installed on the ATM cards in the switch.ro INTEGER .1.3.6.1.4.1.5951.1.2.2.36 |