CASA-CABLE-CMQUERY-MIB
The CASA-CABLE-CMQUERY-MIB facilitates the monitoring and management of Cable Modem Query operations and status within CASA Systems CMTS hardware. It provides specific counters and variables for tracking cable modem registration states, query response metrics, and upstream channel utilization to ensure DOCSIS network stability.
Imported Objects
Objects
17 total| Object Name |
|---|
casaMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.20858.10 |
casaCmQueryMibThis is the enterprise MIB Module for CASA systems CMTS. MODULE-IDENTITY .1.3.6.1.4.1.20858.10.18 |
casaCmQueryMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.20858.10.18.1 |
casaCmQueryTabledescribes the PHY signal quality and Tx/Rx parameter of cable modem. SEQUENCE OF CasaCmQueryEntry .1.3.6.1.4.1.20858.10.18.1.1 |
casaCmQueryEntrydescribes the PHY signal quality and Tx/Rx parameter of cable modem,index of this table is casaQueryCmMacAddress. CasaCmQueryEntry .1.3.6.1.4.1.20858.10.18.1.1.1 |
casaQueryCmMacAddressThe cable modem Mac Address. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.20858.10.18.1.1.1.1 |
casaQueryCmIpAddressThe cable modem Ip Address.ro IpAddress .1.3.6.1.4.1.20858.10.18.1.1.1.2 |
casaQueryCmTxTimeOffsetA measure of the current round trip time at the CM, or the maximum round trip time seen by the CMTS. Used for timing of CM upstream transmissions to ensure synchronized arrivals at the CMTS. Units are in terms of (6.25 microseconds/64).ro Unsigned32 .1.3.6.1.4.1.20858.10.18.1.1.1.3 |
casaQueryCmMicroReflectionTotal microreflections including in-channel response as perceived on this interface, measured in dBc below the signal level. This object is not assumed to return an absolutely accurate value, but should give a rough indication of microreflections received on this interface. It is up to the implementor to provide information as accurate as possible.ro Integer32 .1.3.6.1.4.1.20858.10.18.1.1.1.4 |
casaQueryCmStatusTxPowerThe operational transmit power of the cable modem downstream channel,the most current value (CM) or the value of 0.ro TenthdBmV UNITS "dBmV" .1.3.6.1.4.1.20858.10.18.1.1.1.5 |
casaQueryCmStatusRxPowerThe operational receive power of the cable modem upstream channel,the most current value (CM) or the value of 0ro TenthdBmV UNITS "dBmV" .1.3.6.1.4.1.20858.10.18.1.1.1.6 |
casaQueryCmSigQSignalNoiseSignal/Noise ratio as perceived for this channel. describes the Signal/Noise of the upstream channel of CM .ro TenthdB UNITS "dB" .1.3.6.1.4.1.20858.10.18.1.1.1.7 |
casaQueryCmtsSigQSignalNoiseSignal/Noise ratio as perceived for this channel. describes the average Signal/Noiseof the upstream channel of CMTS.ro TenthdB UNITS "dB" .1.3.6.1.4.1.20858.10.18.1.1.1.8 |
casaCmQueryGroups OBJECT IDENTIFIER .1.3.6.1.4.1.20858.10.18.2 |
casaCmQueryroupBox is required to support objects in this group Unknown .1.3.6.1.4.1.20858.10.18.2.1 |
casaCmQueryCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.20858.10.18.3 |
casaCmQueryComplianceDescription. Unknown .1.3.6.1.4.1.20858.10.18.3.1 |
More MIBs from Casa
Browse all CasaMIBs →The CASA-CABLE-CMCPE-MIB provides enterprise-specific management capabilities for Cable Modem Termination System (CMTS) platforms within the CASA ecosystem, enabling the monitoring of Cable Modem CPE status, provisioning states, and physical layer performance metrics.
The CASA-CABLE-FLAPLIST-MIB monitors and manages cable modem termination system (CMTS) interfaces by tracking physical layer link state transitions, specifically capturing upstream and downstream port flap events and associated timestamps for CASA enterprise hardware. This module enables the collection of interface instability metrics, such as flap counts and duration, to diagnose physical connectivity issues and validate link stability on cable access networks.
The CASA-802-TAP-MIB configures Layer 2 traffic interception filters for Casa Systems hardware by defining specific MAC address stream criteria within the `Casa802tapStreamEntry` object. It operates in conjunction with CASA-TAP2-MIB to establish common stream parameters for MAC-type traffic, enabling the capture and redirection of 802.11 frames for monitoring or analysis.
The CASA-ENTITY-EXT-MIB extends the standard ENTITY-MIB to provide granular hardware inventory and status monitoring for CASA IPQAM (In-Home Packet Quadrature Amplitude Modulation) systems. This module enables the tracking of specific IPQAM hardware components, including line cards, optical transceivers, and power supplies, to facilitate fault isolation and capacity planning within cable headend environments.
The CASA-ID-MIB facilitates SNMP-based monitoring and management of Casa Systems' cable access infrastructure, specifically tracking DOCSIS interface statistics, channel utilization, and modem registration states. This module provides critical visibility into the operational health of cable modem termination systems (CMTS) and associated network elements for performance analysis and fault isolation.
The CASA-MIB module provides SNMP-based monitoring and management capabilities for Casa Systems Inc. network infrastructure, specifically enabling the retrieval of device status, interface statistics, and hardware performance metrics for their broadband access and aggregation equipment.