CASA-CABLE-CMCPE-MIB
AI MIB Summary
The CASA-CABLE-CMCPE-MIB provides enterprise-specific management capabilities for Cable Modem Termination System (CMTS) platforms within the CASA ecosystem, enabling the monitoring of Cable Modem CPE status, provisioning states, and physical layer performance metrics.
This is the enterprise MIB Module for CASA systems CMTS.
Main OID:
casaCmtsCmCpeMib.1.3.6.1.4.1.20858.10.12
37
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
37 total| Object Name |
|---|
casaMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.20858.10 |
casaCmtsCmCpeMibThis is the enterprise MIB Module for CASA systems CMTS. MODULE-IDENTITY .1.3.6.1.4.1.20858.10.12 |
casaCmtsCmCpeObjects OBJECT IDENTIFIER .1.3.6.1.4.1.20858.10.12.1 |
casaCmtsUSModemTableModem count for each upstream channel. SEQUENCE OF CasaCmtsUSModemEntry .1.3.6.1.4.1.20858.10.12.1.1 |
casaCmtsUSModemEntryIndex of the table is logical uptream channel ifIndex . CasaCmtsUSModemEntry .1.3.6.1.4.1.20858.10.12.1.1.1 |
casaCmtsUSActiveModemCountActive modem count for each upstream channel.ro Unsigned32 .1.3.6.1.4.1.20858.10.12.1.1.1.1 |
casaCmtsUSRegisteredModemCountRegistered modem count for each upstream channel.ro Unsigned32 .1.3.6.1.4.1.20858.10.12.1.1.1.2 |
casaCmtsUSTotalModemCountModem total for each upstream channel.ro Unsigned32 .1.3.6.1.4.1.20858.10.12.1.1.1.3 |
casaCmtsDSModemTableModem count for each downstream channel. SEQUENCE OF CasaCmtsDSModemEntry .1.3.6.1.4.1.20858.10.12.1.2 |
casaCmtsDSModemEntryIndex of the table is downstream channel ifIndex . CasaCmtsDSModemEntry .1.3.6.1.4.1.20858.10.12.1.2.1 |
casaCmtsDSActiveModemCountActive modem count for each downstream channel.ro Unsigned32 .1.3.6.1.4.1.20858.10.12.1.2.1.1 |
casaCmtsDSRegisteredModemCountRegistered modem count for each downstream channel.ro Unsigned32 .1.3.6.1.4.1.20858.10.12.1.2.1.2 |
casaCmtsDSTotalModemCountModem total for each downstream channel.ro Unsigned32 .1.3.6.1.4.1.20858.10.12.1.2.1.3 |
casaCmtsCmCpeTableDescribes the relation between CPE and CM. SEQUENCE OF CasaCmtsCmCpeEntry .1.3.6.1.4.1.20858.10.12.1.3 |
casaCmtsCmCpeEntryThe list contains information for a cable modem (CM) or a Customer Premises Equipment (CPE). An entry exist for each cable modem supported by CMTS and each Customer Premises Equipment connected to a cable modem supported by CMTS. CasaCmtsCmCpeEntry .1.3.6.1.4.1.20858.10.12.1.3.1 |
casaCmtsCmCpeMacAddressThe Mac address to identify a cable modem or a Customer Premises Equipment. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.20858.10.12.1.3.1.1 |
casaCmtsCmCpeTypendicate this entry is for cable modem or Customer Premises Equipment. The enumerations are: cm(1): cable modem cpe(2): Customer Premises Equipmentro Enumeration .1.3.6.1.4.1.20858.10.12.1.3.1.2 |
casaCmtsCmCpeIpAddressIp address of the cable modem or Customer Premises Equipment.ro IpAddress .1.3.6.1.4.1.20858.10.12.1.3.1.3 |
casaCmtsCmCpeIfIndexThe CMTS cable MAC interface index (ifType of docsCableMaclayer(127)) that cable modem or Customer Premises Equipment connects to. Use casaCmtsCmCpeIfIndex and casaCmtsCmCpeCmtsServiceId to identify an entry in docsIfCmtsServiceTable.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.20858.10.12.1.3.1.4 |
casaCmtsCmCpeCmtsServiceIdThe cable modem's primary Service ID if the type is cm. The primary Service ID for the CM which the CPE connects if the type is cpe. Use casaCmtsCmCpeIfIndex and casaCmtsCmCpeCmtsServiceId to identify an entry in docsIfCmtsServiceTable.ro Integer32 .1.3.6.1.4.1.20858.10.12.1.3.1.5 |
casaCmtsCmCpeCmStatusIndexPointer to an entry in docsIfCmtsCmStatusTable identifying status of the CM (which the CPE connects to.)ro Integer32 .1.3.6.1.4.1.20858.10.12.1.3.1.6 |
casaCmtsCmCpeResetNowSetting this object to true(1) causes the device to reset. Reading this object always returns false(2). For casaCmtsCmCpeType value cm(1), CMTS removes the CM from the Station Maintenance List and would cause the CM to reset its interface. For casaCmtsCmCpeType value cpe(2), CMTS removes the CPE's MAC address from the internal address table. It then rediscovers and associates the CPE with the correct CM during the next DHCP lease cycle. By resetting the CPE, the user can replace an existing CPE or change its network interface card (NIC)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.20858.10.12.1.3.1.7 |
casaCmtsCpeIpNetToPhysicalTableThe IP Address Translation table used for mapping from IP addresses to physical addresses. SEQUENCE OF CasaCmtsCpeIpNetToPhysicalEntry .1.3.6.1.4.1.20858.10.12.1.4 |
casaCmtsCpeIpNetToPhysicalEntryEach entry contains one IP address to `physical' address equivalence.. CasaCmtsCpeIpNetToPhysicalEntry .1.3.6.1.4.1.20858.10.12.1.4.1 |
casaCmtsCpeIpNetToPhysicalIfIndexThe index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.20858.10.12.1.4.1.1 |
casaCmtsCpeIpNetToPhysicalNetAddressTypeThe type of casaCmtsCpeIpNetToPhysicalNetAddress. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.20858.10.12.1.4.1.2 |
casaCmtsCpeIpNetToPhysicalNetAddressThe IP Address corresponding to the media-dependent `physical' address. The address type of this object is specified in casaCmtsCpeIpNetToPhysicalAddressType. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.20858.10.12.1.4.1.3 |
casaCmtsCpeIpNetToPhysicalCmPhysAddressThe CM MAC address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.20858.10.12.1.4.1.5 |
casaCmtsCpeIpNetToPhysicalTypeThe type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToPhysicalTable. That is, it effectively dis- associates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipNetToPhysicalType object. The 'dynamic(3)' type indicates that the IP address to physical addresses mapping has been dynamically resolved using e.g., IPv4 ARP or the IPv6 Neighbor Discovery protocol. The 'static(4)' type indicates that the mapping has been statically configured. Both of these refer to entries that provide mappings for other entities addresses. The 'local(5)' type indicates that the mapping is provided for an entity's own interface address. As the entries in this table are typically not persistent when this object is written the entity SHOULD NOT save the change to non-volatile storage.ro Enumeration .1.3.6.1.4.1.20858.10.12.1.4.1.7 |
casaCmtsCmReset OBJECT IDENTIFIER .1.3.6.1.4.1.20858.10.12.1.5 |
casaCmtsCmResetByIpAddrto reset cable modem by ip addressrw IpAddress .1.3.6.1.4.1.20858.10.12.1.5.1 |
casaCmtsCmResetByMacAddrto reset cable modem by mac addressrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.20858.10.12.1.5.2 |
casaCmtsCmResetAllIf set to 'true', all cable modem are reset. Reading this object always returns 'false'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.20858.10.12.1.5.3 |
casaCmCpeGroups OBJECT IDENTIFIER .1.3.6.1.4.1.20858.10.12.2 |
casaCmCpeGroupDescription. Unknown .1.3.6.1.4.1.20858.10.12.2.1 |
casaCmCpeCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.20858.10.12.3 |
casaCmCpeComplianceDescription. Unknown .1.3.6.1.4.1.20858.10.12.3.1 |