C-PRODUCT-CBR-V35-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for C-PRODUCT-CBR-V35-MIB.
15
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
15 total| Object Name |
|---|
cbrV35PortConfig OBJECT IDENTIFIER .1.3.6.1.4.1.43.1.12.1.1.15.5 |
C-PRODUCT-BASE-MIB Unknown .1.3.6.1.4.1.43.1.12.1.1.15.5 |
cbrV35PortConfTableThis object contains the CBR's V.35 specific port Configuration table.
There is one cbrV35PortConfEntry associated for each provisioned
CBR port interface within the shelf. This table uses portSlot and
portNumber as an index which is defined in the portBaseTable of the
C-PRODUCT BASE MIB. This index value uniquely identifies the CBR port
interface to which this entry is applicable. SEQUENCE OF CbrV35PortEntry .1.3.6.1.4.1.43.1.12.1.1.15.5.1 |
cbrV35PortConfEntryAn entry in the CBR specific port Configuration table. CbrV35PortEntry .1.3.6.1.4.1.43.1.12.1.1.15.5.1.1 |
cbrV35PortConfCableTypeThis object indicates the type of cable connected to the port.
An error is returned if an access is attempted on
a physical interface other than a V.35 port interface. The default
value is none (1).ro Enumeration .1.3.6.1.4.1.43.1.12.1.1.15.5.1.1.1 |
cbrV35PortConfScrClockSourceThis object indicates the SCR clock source. This is
aplicable for both DCE & DTE cable types.
If the cable type is 'none', a get request returns
whatever the value currently stored in the managed node for this
port and a set request stores the value.rw Enumeration .1.3.6.1.4.1.43.1.12.1.1.15.5.1.1.2 |
cbrV35PortConfTxClockPhaseThis object indicates the type of Transmit clock phase needed to
correct the clock out of phase problem. This is aplicable ONLY when
a 'dte' cable is connected to the port.
The default value is normal (1).rw Enumeration .1.3.6.1.4.1.43.1.12.1.1.15.5.1.1.3 |
cbrV35PortConfRtsThis object indicates RTS pin status. Default value is off (1).ro Enumeration .1.3.6.1.4.1.43.1.12.1.1.15.5.1.1.4 |
cbrV35PortConfCtsThis object indicates CTS pin status. Default value is off (1).ro Enumeration .1.3.6.1.4.1.43.1.12.1.1.15.5.1.1.5 |
cbrV35PortConfDcdThis object indicates DCD pin status. Default value is off (1).ro Enumeration .1.3.6.1.4.1.43.1.12.1.1.15.5.1.1.6 |
cbrV35PortConfDsrThis object indicates DSR pin status. Default value is off (1).ro Enumeration .1.3.6.1.4.1.43.1.12.1.1.15.5.1.1.7 |
cbrV35PortConfSctClockSourceThis object indicates the type of SCT clock source. This is
aplicable for both 'DCE' & 'DTE' cable types. If no cable
is attached then it just reflects the value stored in the database.
The default value is internal (2).rw Enumeration .1.3.6.1.4.1.43.1.12.1.1.15.5.1.1.8 |
cbrV35PortConfRxTimingSourceThis object indicates the Serial interface Recieive Timing Source.
The default value is dce-transmit-clock.rw Enumeration .1.3.6.1.4.1.43.1.12.1.1.15.5.1.1.9 |
cbrV35PortConfCableIDThis object indicates the type of physical interface.ro Enumeration .1.3.6.1.4.1.43.1.12.1.1.15.5.1.1.10 |
cbrV35PortConfLoopBackTypeThis object indicates the type of loopback configured for the
specified T1/E1 port interface. Network-line (2) redirects incoming
remote traffic back into the network interface at the external edge of
the card interface. Network-card (4) regenerates framing information
prior to redirecting incoming remote traffic back into the network
interface. Local-card (3) redirects local incoming traffic back into
the local system. The default value is no-loopback (1).rw Enumeration .1.3.6.1.4.1.43.1.12.1.1.15.5.1.1.11 |