Home/Catalog/BTI-OL-MIB

BTI-OL-MIB

The external MIB definitions for the managenent of the BTI Dynamic Optical Layer components including DLA-series amplifiers and ROB-series ROADM modules.
Main OID:
olMib.1.3.6.1.4.1.18070.1.6
465
Objects
Active
Status
5
Dependencies

Imported Objects

SNMPv2-SMI
SNMPv2-TC
BTI-MIB
BTI-7000-MIB
BTI-TC-MIB

Objects

465 total
Object Name
olMibThe external MIB definitions for the managenent of the BTI Dynamic Optical Layer components including DLA-series amplifiers and ROB-series ROADM modules.
MODULE-IDENTITY
.1.3.6.1.4.1.18070.1.6
olGroupTableThis table lists all provisioned optical layer module groupings on the node.
SEQUENCE OF OlGroupEntry
.1.3.6.1.4.1.18070.2.2.1.16.1
olGroupEntryThe conceptual row object of the optical layer group table.
OlGroupEntry
.1.3.6.1.4.1.18070.2.2.1.16.1.1
olGroupIdxA number which uniquely identifies the optical layer group within the node.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.1.1.1
olGroupTypeThe optical layer group configuration type. This is a mandatory object that must be specified when a row of the table is created. The value of none is not applicable for this object.rw
OlGroupType
.1.3.6.1.4.1.18070.2.2.1.16.1.1.2
olGroupIdTextual data recorded by the user to briefly identify the provisioned optical layer group in a manner useful to the user.rw
DisplayString
.1.3.6.1.4.1.18070.2.2.1.16.1.1.3
olGroupCustom1A variable length text string for operating company use.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.1.1.4
olGroupCustom2A variable length text string for operating company use.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.1.1.5
olGroupCustom3A variable length text string for operating company use.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.1.1.6
olGroupRowStatusUsed to control the addition and deletion of entries in the optical layer group table.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.1.1.100
olEqptTableThis table lists all provisioned equipment modules that are assigned to an optical layer grouping.
SEQUENCE OF OlEqptEntry
.1.3.6.1.4.1.18070.2.2.1.16.3
olEqptEntryThe conceptual row object of the optical layer equipment table.
OlEqptEntry
.1.3.6.1.4.1.18070.2.2.1.16.3.1
olEqptCpTypeIdxThe type of circuit pack of the equipment module that is assigned to the optical layer group.
CpType
.1.3.6.1.4.1.18070.2.2.1.16.3.1.1
olEqptShelfIdxThe number of the shelf of the equipment module that is assigned to the optical layer group. For equipment modules that do not reside in a shelf (40-channel Mux/Demux), the value of this object is 0.
INTEGER (0|1|11|21|31)
.1.3.6.1.4.1.18070.2.2.1.16.3.1.2
olEqptSlotIdxThe number of the slot of the equipment module that is assigned to the optical layer group. For equipment modules that do not reside in an active shelf slot (ex. 40-channel Mux/Demux), this object represents the module index among modules attributed to shelf 0.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.3.1.3
olEqptGroupNumThe optical layer group to which the equipment modules is assigned.rw
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.3.1.4
olEqptDegreeNumThe optical layer group degree to which the equipment module is assigned.rw
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.3.1.5
olEqptRowStatusUsed to control the addition and deletion of entries in the optical layer equipment table, which in turn, controls the assigning and unassigning of equipment modules to/from an optical layer grouping.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.3.1.100
olPortTableThis table lists all managed ports on equipment modules assigned to optical layer groupings.
SEQUENCE OF OlPortEntry
.1.3.6.1.4.1.18070.2.2.1.16.4
olPortEntryThe conceptual row object of the optical layer port table.
OlPortEntry
.1.3.6.1.4.1.18070.2.2.1.16.4.1
olPortCpTypeIdxThe type of circuit pack on which the optical layer port is located.
CpType
.1.3.6.1.4.1.18070.2.2.1.16.4.1.1
olPortShelfIdxThe number of the shelf on which the optical layer port is located.
INTEGER (0|1|11|21|31)
.1.3.6.1.4.1.18070.2.2.1.16.4.1.2
olPortSlotIdxThe number of the slot on which the optical layer port is located.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.4.1.3
olPortTypeIdxThe type of optical layer port according to the function it provides.
OlPortType
.1.3.6.1.4.1.18070.2.2.1.16.4.1.4
olPortIdxThe number of the optical layer port of the specified port type.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.4.1.5
olPortIdTextual data recorded by the user to briefly identify the provisioned optical layer port in a manner useful to the user.rw
DisplayString
.1.3.6.1.4.1.18070.2.2.1.16.4.1.6
olPortCustom1A variable length text string for operating company use.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.4.1.7
olPortCustom2A variable length text string for operating company use.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.4.1.8
olPortCustom3A variable length text string for operating company use.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.4.1.9
olPortDWDMTypeUsed to configure the port for the type of DWDM composite to which it is inter-connection. By default, all ports are inter-connected with native optical layer DWDM composites. For some configurations, client port 2 of ROB2 pack and ROB4 modules may be configured for alien DWDM type.rw
Enumeration
.1.3.6.1.4.1.18070.2.2.1.16.4.1.10
olPortGridThe DWDM grid spacing on the port.rw
Enumeration
.1.3.6.1.4.1.18070.2.2.1.16.4.1.11
olPortWavelengthThe wavelength of the channel carried by the port. This object exists only in table entries for channel ports on Mux/Demux modules.ro
FixedX100 UNITS "nanometers/100"
.1.3.6.1.4.1.18070.2.2.1.16.4.1.12
olPortFrequencyThe frequency of the channel carried by the port. This object exists only in table entries for channel ports on Mux/Demux modules.ro
FixedX100 UNITS "terahertz/100"
.1.3.6.1.4.1.18070.2.2.1.16.4.1.13
olPortOperStatusThe reported operational status of the optical layer port.ro
OperStatus
.1.3.6.1.4.1.18070.2.2.1.16.4.1.14
olPortOperStatQlfrThis is a textual list of qualifiers about the reported operational status of the optical layer port.ro
OperStatQlfr
.1.3.6.1.4.1.18070.2.2.1.16.4.1.15
olPortRemoteIdIdentifies the remote node and port to which the optical layer port is connected, in the format prescribed by the PSM network management system.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.4.1.16
olPortExpCnxDegreeThe expected degree number of the equipment that is inter-connected on the port.ro
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.4.1.17
olPortActCnxDegreeThe actual degree number of the equipment that is inter-connected on the port.ro
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.4.1.18
olPortRowStatusUsed to control the addition and deletion of entries in the Optical Layer Port table. Manual creation and deletion is supported only for the client 2 port on ROB packs assigned to a Channel-equalizing Terminal or Reconfigurable Add/Drop node group.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.4.1.100
eqptConnTableThis table lists all intra-group optical fiber patch connections between ports on equipment modules assigned to optical layer groupings.
SEQUENCE OF EqptConnEntry
.1.3.6.1.4.1.18070.2.2.1.16.5
eqptConnEntryThe conceptual row object of the equipment connection table.
EqptConnEntry
.1.3.6.1.4.1.18070.2.2.1.16.5.1
eqptConnSrcCpTypeIdxThe type of circuit pack on which the source port of the equipment connection is located.
CpType
.1.3.6.1.4.1.18070.2.2.1.16.5.1.1
eqptConnSrcShelfIdxThe number of the shelf on which the source port of the equipment connection is located.
INTEGER (0|1|11|21|31)
.1.3.6.1.4.1.18070.2.2.1.16.5.1.2
eqptConnSrcSlotIdxThe number of the slot on which the source port of the equipment connection is located.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.5.1.3
eqptConnSrcPortTypeIdxThe type of the source port of the equipment connection, according to the function it provides.
OlPortType
.1.3.6.1.4.1.18070.2.2.1.16.5.1.4
eqptConnSrcIdxThe number of the port of the specified port type of the source port of the equipment connection.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.5.1.5
eqptConnDstCpTypeIdxThe type of circuit pack on which the destination port of the equipment connection is located.
CpType
.1.3.6.1.4.1.18070.2.2.1.16.5.1.6
eqptConnDstShelfIdxThe number of the shelf on which the destination port of the equipment connection is located.
INTEGER (0|1|11|21|31)
.1.3.6.1.4.1.18070.2.2.1.16.5.1.7
eqptConnDstSlotIdxThe number of the slot on which the destination port of the equipment connection is located.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.5.1.8
eqptConnDstPortTypeIdxThe type of the destination port of the equipment connection, according to the function it provides.
OlPortType
.1.3.6.1.4.1.18070.2.2.1.16.5.1.9
eqptConnDstIdxThe number of the port of the specified port type of the destination port of the equipment connection.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.5.1.10
eqptConnTypeThe type of optical fiber patch cable for the equipment connection entry.ro
Enumeration
.1.3.6.1.4.1.18070.2.2.1.16.5.1.11
eqptConnRowStatusThe equipment connection table RowStatus object is not readable or writeable because all entries in the table are automatically created and deleted as equipment modules are assigned and unassigned to optical layer groupings. This equipment connection row status object is used only in database change notifications to indicate if the row has been created or deleted.ro
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.5.1.100
olOSCTableThis table lists all OSC managed objects that have been created on the optical layer equipment modules.
SEQUENCE OF OlOSCEntry
.1.3.6.1.4.1.18070.2.2.1.16.6
olOSCEntryThe conceptual row object of the optical laye OSC table.
OlOSCEntry
.1.3.6.1.4.1.18070.2.2.1.16.6.1
olOSCCpTypeIdxThe type of circuit pack on which the OSC is located.
CpType
.1.3.6.1.4.1.18070.2.2.1.16.6.1.1
olOSCShelfIdxThe number of the shelf in which the OSC is located.
INTEGER (1|11|21|31)
.1.3.6.1.4.1.18070.2.2.1.16.6.1.2
olOSCSlotIdxThe number of the slot in which the OSC is located.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.6.1.3
olOSCLineIdxThe line number of the OSC.
INTEGER (1)
.1.3.6.1.4.1.18070.2.2.1.16.6.1.4
olOSCAdminStatusThe administrative status of the OSC. The default value is autoEnabled if the supporting equipment is enabled or autoEnabled, otherwise it is disabled.rw
AdminStatus
.1.3.6.1.4.1.18070.2.2.1.16.6.1.5
olOSCOperStatusThe reported operational status of the OSC.ro
OperStatus
.1.3.6.1.4.1.18070.2.2.1.16.6.1.6
olOSCOperStatQlfrThis is a textual list of qualifiers about the reported operational status of the OSC.ro
OperStatQlfr
.1.3.6.1.4.1.18070.2.2.1.16.6.1.7
olOSCAutoEnableTimerSpecifies the auto-enable timer for the targeted OSC. This value only applies if the olOSCAdminStatus object is set to autoEnabled, in which case the default value is 008-00, otherwise, it is 000-00.rw
HoursAndMinutes
.1.3.6.1.4.1.18070.2.2.1.16.6.1.8
olOSCActAutoEnableTimerIndicates the time remaining on the auto-enable timer if it is actively counting down. Otherwise, the value returned is 000-00.ro
HoursAndMinutes
.1.3.6.1.4.1.18070.2.2.1.16.6.1.9
olOSCIdTextual data recorded by the user to briefly identify the OSC object in a manner useful to the user.rw
DisplayString
.1.3.6.1.4.1.18070.2.2.1.16.6.1.10
olOSCCustom1A variable length text string for operating company use.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.6.1.11
olOSCCustom2A variable length text string for operating company use.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.6.1.12
olOSCCustom3A variable length text string for operating company use.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.6.1.13
olOSCFEIMMonThis object is used to control the monitoring of the Far End Node Mismatch Identifier condition. When enabled, the received far-end node identification attributes will be monitored and compared to the expected far-end node identification attribites, and a condition is raised if attributes do no match.rw
Enumeration
.1.3.6.1.4.1.18070.2.2.1.16.6.1.14
olOSCExpFESysNameThe expected far-end node system identifier.rw
DisplayString
.1.3.6.1.4.1.18070.2.2.1.16.6.1.15
olOSCExpFEIPAddrThe expected far-end node IP address.rw
IpAddress
.1.3.6.1.4.1.18070.2.2.1.16.6.1.16
olOSCExpFEGrpThe expected far-end node optical layer group number.rw
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.6.1.17
olOSCExpFEDegrThe expected far-end node optical layer degree number.rw
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.6.1.18
olOSCFESysNameThe actual far-end node system identifier.ro
DisplayString
.1.3.6.1.4.1.18070.2.2.1.16.6.1.19
olOSCFEIPAddrThe actual far-end node IP address.ro
IpAddress
.1.3.6.1.4.1.18070.2.2.1.16.6.1.20
olOSCFEGrpThe actual far-end node optical layer group number.ro
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.6.1.21
olOSCFEDegrThe actual far-end node optical layer degree number.ro
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.6.1.22
olOSCFEGrpTypeThe actual far-end node optical layer group configuration type.ro
OlGroupType
.1.3.6.1.4.1.18070.2.2.1.16.6.1.23
olOSCRowStatusThe Optical Layer OSC table RowStatus object is not readable or writeable because all entries in the table are automatically created and deleted when the supporting DLA or ROB equipment is provisioned. This optical layer OSC row status object is used only in database change notifications to indicate if the row has been created or deleted.ro
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.6.1.100
odccTableThis table lists all provisioned ODCC objects on equipment modules assigned to optical layer groupings.
SEQUENCE OF OdccEntry
.1.3.6.1.4.1.18070.2.2.1.16.7
odccEntryThe conceptual row object of the ODCC table.
OdccEntry
.1.3.6.1.4.1.18070.2.2.1.16.7.1
odccCpTypeIdxThe type of circuit pack on which the ODCC is located.
CpType
.1.3.6.1.4.1.18070.2.2.1.16.7.1.1
odccShelfIdxThe number of the shelf in which the ODCC is located.
INTEGER (1|11|21|31)
.1.3.6.1.4.1.18070.2.2.1.16.7.1.2
odccSlotIdxThe number of the slot in which the ODC is located.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.7.1.3
odccLineIdxThe line number of the ODCC.
INTEGER (1)
.1.3.6.1.4.1.18070.2.2.1.16.7.1.4
odccAdminStatusThe administrative status of the ODCC. The default value is disabled if the supporting ODC is disabled, otherwise it is enabled.rw
AdminStatus
.1.3.6.1.4.1.18070.2.2.1.16.7.1.5
odccRowStatusUsed to control the addition and deletion of entries in the ODCC table, which in turn controls the provisioning and de-provisioning of ODCC objects.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.7.1.100
wdmTableThis table lists all WDM managed objects that have been created on optical layer equipment.
SEQUENCE OF WdmEntry
.1.3.6.1.4.1.18070.2.2.1.16.8
wdmEntryThe conceptual row object of the WDM table.
WdmEntry
.1.3.6.1.4.1.18070.2.2.1.16.8.1
wdmCpTypeIdxThe type of circuit pack on which the WDM is located.
CpType
.1.3.6.1.4.1.18070.2.2.1.16.8.1.1
wdmShelfIdxThe number of the shelf in which the WDM is located.
INTEGER (1|11|21|31)
.1.3.6.1.4.1.18070.2.2.1.16.8.1.2
wdmSlotIdxThe number of the slot in which the WDM is located.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.8.1.3
wdmLineIdxThe line number of the WDM.
INTEGER (1)
.1.3.6.1.4.1.18070.2.2.1.16.8.1.4
wdmAdminStatusThe administrative status of the WDM. The default value is autoEnabled if the supporting equipment is enabled or autoEnabled, otherwise it is disabled.rw
AdminStatus
.1.3.6.1.4.1.18070.2.2.1.16.8.1.5
wdmOperStatusThe reported operational status of the WDM.ro
OperStatus
.1.3.6.1.4.1.18070.2.2.1.16.8.1.6
wdmOperStatQlfrThis is a textual list of qualifiers about the reported operational status of the WDM.ro
OperStatQlfr
.1.3.6.1.4.1.18070.2.2.1.16.8.1.7
wdmAutoEnableTimerSpecifies the auto-enable timer for the targeted WDM. This value only applies if the wdmAdminStatus object is set to autoEnabled, in which case the default value is 008-00, otherwise, it is 000-00.rw
HoursAndMinutes
.1.3.6.1.4.1.18070.2.2.1.16.8.1.8
wdmActAutoEnableTimerIndicates the time remaining on the auto-enable timer if it is actively counting down. Otherwise, the value returned is 000-00.ro
HoursAndMinutes
.1.3.6.1.4.1.18070.2.2.1.16.8.1.9
wdmIdTextual data recorded by the user to briefly identify the WDM object in a manner useful to the user.rw
DisplayString
.1.3.6.1.4.1.18070.2.2.1.16.8.1.10
wdmCustom1A variable length text string for operating company use.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.8.1.11
wdmCustom2A variable length text string for operating company use.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.8.1.12
wdmCustom3A variable length text string for operating company use.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.8.1.13
wdmFiberTypeThe fiber type of the span fiber.rw
Enumeration
.1.3.6.1.4.1.18070.2.2.1.16.8.1.14
wdmSpanLengthThe measured length of the receive span fiber.ro
Unsigned32 UNITS "kilometers"
.1.3.6.1.4.1.18070.2.2.1.16.8.1.15
wdmSpanLossRxHighThThe high threshold setting for the loss on the receive fiber of the Line span. The setting for this object is used to evaluate the olPortLossRxHighThCond trap. When the value of this object is set to 0, the olPortLossRxHighThCond trap is disabled.rw
FixedX10 UNITS "dB/10"
.1.3.6.1.4.1.18070.2.2.1.16.8.1.16
wdmSpanLossSpecMaxThe specified maximum supported loss on the Line span. The value of this object is dependent on the optical layer group configurations of the local and far-end nodes.ro
FixedX10 UNITS "dB/10"
.1.3.6.1.4.1.18070.2.2.1.16.8.1.17
wdmNumChannelsThe actual number of channels that the WDM is currently provisioned to carry.ro
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.8.1.18
wdmRowStatusThe WDM table RowStatus object is not readable or writeable because all entries in the table are automatically created and deleted when the supporting DLA or ROB circuit pack is assigned and unassigned to an optical layer grouping. This WDM row status object is used only in database change notifications to indicate if the row has been created or deleted.ro
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.8.1.100
wchXCTableThis table lists all configured wavelength channel cross-connections configured on optical layer equipment.
SEQUENCE OF WchXCEntry
.1.3.6.1.4.1.18070.2.2.1.16.9
wchXCEntryThe conceptual row object of the wavelength channel cross-connection table.
WchXCEntry
.1.3.6.1.4.1.18070.2.2.1.16.9.1
wchXCSrcCpTypeIdxThe type of circuit pack on which the source wavelength channel of the cross-connection is located.
CpType
.1.3.6.1.4.1.18070.2.2.1.16.9.1.1
wchXCSrcShelfIdxThe number of the shelf on which the source wavelength channel of the cross-connection is located.
INTEGER (0|1|11|21|31)
.1.3.6.1.4.1.18070.2.2.1.16.9.1.2
wchXCSrcSlotIdxThe number of the slot on which the source wavelength channel of the cross-connection is located.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.9.1.3
wchXCSrcPortTypeIdxThe type of port on which the source wavelength channel of the cross-connection is located.
OlPortType
.1.3.6.1.4.1.18070.2.2.1.16.9.1.4
wchXCSrcPortIdxThe number of the port on which the source wavelength channel of the cross-connection is located.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.9.1.5
wchXCSrcChannelIdxThe channel number of the source wavelength channel of the cross-connection.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.9.1.6
wchXCDstCpTypeIdxThe type of circuit pack on which the destination wavelength channel of the cross-connection is located.
CpType
.1.3.6.1.4.1.18070.2.2.1.16.9.1.7
wchXCDstShelfIdxThe number of the shelf on which the destination wavelength channel of the cross-connection is located.
INTEGER (0|1|11|21|31)
.1.3.6.1.4.1.18070.2.2.1.16.9.1.8
wchXCDstSlotIdxThe number of the slot on which the destination wavelength channel of the cross-connection is located.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.9.1.9
wchXCDstPortTypeIdxThe type of port on which the destination wavelength channel of the cross-connection is located.
OlPortType
.1.3.6.1.4.1.18070.2.2.1.16.9.1.10
wchXCDstPortIdxThe number of the port on which the destination wavelength channel of the cross-connection is located.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.9.1.11
wchXCDstChannelIdxThe channel number of the destination wavelength channel of the cross-connection.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.9.1.12
wchXCServiceNameName of end-to-end wavelength service of which this cross- connection is a part.rw
DisplayString
.1.3.6.1.4.1.18070.2.2.1.16.9.1.13
wchXCRowStatusUsed to control the addition and deletion of entries in the wavelength channel cross-connection table.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.9.1.100
wchTableThis table lists all managed wavelength channels on equipment modules assigned to optical layer groupings.
SEQUENCE OF WchEntry
.1.3.6.1.4.1.18070.2.2.1.16.10
wchEntryThe conceptual row object of the wavelength channel table.
WchEntry
.1.3.6.1.4.1.18070.2.2.1.16.10.1
wchCpTypeIdxThe type of circuit pack on which the wavelength channel is located.
CpType
.1.3.6.1.4.1.18070.2.2.1.16.10.1.1
wchShelfIdxThe number of the shelf on which the wavelength channel is located.
INTEGER (1|11|21|31)
.1.3.6.1.4.1.18070.2.2.1.16.10.1.2
wchSlotIdxThe number of the slot on which the wavelength channel is located.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.10.1.3
wchPortTypeIdxThe type of port on which the wavelength channel is located.
OlPortType
.1.3.6.1.4.1.18070.2.2.1.16.10.1.4
wchPortIdxThe number of the port on which the wavelength channel is located.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.10.1.5
wchIdxThe number of the targeted wavelength channel.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.10.1.6
wchAdminStatusThe administrative status of the wavelength channel. The default value is autoEnabled if the supporting WDM is enabled or autoEnabled, otherwise it is disabled.rw
AdminStatus
.1.3.6.1.4.1.18070.2.2.1.16.10.1.7
wchOperStatusThe reported operational status of the wavelength channel.ro
OperStatus
.1.3.6.1.4.1.18070.2.2.1.16.10.1.8
wchOperStatQlfrThis is a textual list of qualifiers about the reported operational status of the wavelength channel.ro
OperStatQlfr
.1.3.6.1.4.1.18070.2.2.1.16.10.1.9
wchAutoEnableTimerSpecifies the auto-enable timer for the targeted wavelength channel. This value only applies if the wchAdminStatus object is set to autoEnabled, in which case the default value is 008-00, otherwise, it is 000-00.rw
HoursAndMinutes
.1.3.6.1.4.1.18070.2.2.1.16.10.1.10
wchActAutoEnableTimerIndicates the time remaining on the auto-enable timer if it is actively counting down. Otherwise, the value returned is 000-00.ro
HoursAndMinutes
.1.3.6.1.4.1.18070.2.2.1.16.10.1.11
wchIdTextual data recorded by the user to briefly identify the wavelength channel object in a manner useful to the user.rw
DisplayString
.1.3.6.1.4.1.18070.2.2.1.16.10.1.12
wchCustom1A variable length text string for operating company use.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.10.1.13
wchCustom2A variable length text string for operating company use.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.10.1.14
wchCustom3A variable length text string for operating company use.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.10.1.15
wchBitrateThe bitrate of the signal carried by the wavelength channel. A value of tenGig applies to all signal bitrates of 10Gb/sec or less.rw
Enumeration
.1.3.6.1.4.1.18070.2.2.1.16.10.1.16
wchGridThe minimum grid spacing with which the channel is compatible.rw
Enumeration
.1.3.6.1.4.1.18070.2.2.1.16.10.1.17
wchWavelengthThe wavelength of the channel.ro
FixedX100 UNITS "nanometers/100"
.1.3.6.1.4.1.18070.2.2.1.16.10.1.18
wchFrequencyThe frequency of the channel.ro
FixedX100 UNITS "terahertz/100"
.1.3.6.1.4.1.18070.2.2.1.16.10.1.19
wchRowStatusThe Wavelength Channel table RowStatus object is not readable or writeable because all entries in the Wavelength Channel table are automatically created and deleted when an wavelength channel cross-connection involving the wavelength channel is created or deleted. This Wavelength Channel row status object is used only in database change notifications to indicate if the row has been created or deleted.ro
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.10.1.100
olGroupMerge
OBJECT IDENTIFIER
.1.3.6.1.4.1.18070.2.2.1.16.11
olGroupMergeCmdThis object is used to invoke an optical layer group merge operation. The optical layer group merge is activated when this object is set to invoke(2). The values of the olGroupMergePrimary and olGroupMergeSecondary objects must be set in the same set request as this object. When a get is performed on this object, the value returned is idle(1).rw
Enumeration
.1.3.6.1.4.1.18070.2.2.1.16.11.1
olGroupMergePrimaryThe identifier of the primary optical layer group of the merge.rw
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.11.2
olGroupMergeSecondaryThe identifier of the secondary optical layer group of the merge.rw
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.11.3
olPerformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.18070.2.2.1.16.12
olOSCCrntPMTableA table of current performance monitoring statistics collected for the optical layer OSC objects on the NE.
SEQUENCE OF OlOSCCrntPMEntry
.1.3.6.1.4.1.18070.2.2.1.16.12.1
olOSCCrntPMEntryThe row entry object of the optical layer OSC current performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a current measurement interval for a given optical layer OSC object.
OlOSCCrntPMEntry
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1
olOSCCrntPMCpTypeIdxThe type of circuit pack on which the optical layer OSC targeted for PMs is located.
CpType
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.1
olOSCCrntPMShelfIdxThe number of the shelf in which the optical layer OSC targeted for PMs is located.
INTEGER (1|11|21|31)
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.2
olOSCCrntPMSlotIdxThe number of the slot in which the optical layer OSC targeted for PMs is located.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.3
olOSCCrntPMLineIdxThe line number of the OSC targeted for PMs.
INTEGER (1)
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.4
olOSCCrntPMIntervalTypeIdxThe type of PM bin according to interval length.
PMIntervalType
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.5
olOSCCrntPMOPRValueThe OSC optical power received on the Line port.ro
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.6
olOSCCrntPMOPRTimeStampThe date and time stamp of the optical power received value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.7
olOSCCrntPMOPRValidityIndicates the validity of the provided optical power received value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.8
olOSCCrntPMOPTValueThe OSC optical power transmitted at the output of the Line port.ro
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.9
olOSCCrntPMOPTTimeStampThe date and time stamp of the optical power transmitted value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.10
olOSCCrntPMOPTValidityIndicates the validity of the provided optical power transmitted value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.11
olOSCCrntPMOBRValueThe OSC optical back-reflected power.ro
FixedX10 UNITS "dB/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.12
olOSCCrntPMOBRTimeStampThe date and time stamp of the optical back-reflected power value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.13
olOSCCrntPMOBRValidityIndicates the validity of the provided optical back-reflected power value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.14
olOSCCrntPMCVSValueThe count of coding violations at the section layer of the received OSC signal.rw
Unsigned32
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.15
olOSCCrntPMCVSTimeStampThe date and time stamp of the section layer coding violations value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.16
olOSCCrntPMCVSValidityIndicates the validity of the provided section layer coding violations value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.17
olOSCCrntPMCVSInitializeUsed to initialize the value of the olOSCCrntPMCVSValue object to 0.rw
InitializeCmd
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.18
olOSCCrntPMESSValueThe count of errored seconds at the section layer of the received OSC signal.rw
Unsigned32
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.19
olOSCCrntPMESSTimeStampThe date and time stamp of the section layer errored seconds value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.20
olOSCCrntPMESSValidityIndicates the validity of the provided section layer errored seconds value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.21
olOSCCrntPMESSInitializeUsed to initialize the value of the olOSCCrntPMESSValue object to 0.rw
InitializeCmd
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.22
olOSCCrntPMSESSValueThe count of severely errored seconds at the section layer of the received OSC signal.rw
Unsigned32
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.23
olOSCCrntPMSESSTimeStampThe date and time stamp of the section layer severely errored seconds value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.24
olOSCCrntPMSESSValidityIndicates the validity of the provided section layer severely errored seconds value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.25
olOSCCrntPMSESSInitializeUsed to initialize the value of the olOSCCrntPMSESSValue object to 0.rw
InitializeCmd
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.26
olOSCCrntPMSEFSSValueThe count of severely errored framing seconds at the section layer of the received OSC signal.rw
Unsigned32
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.27
olOSCCrntPMSEFSSTimeStampThe date and time stamp of the section layer severely errored framing seconds value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.28
olOSCCrntPMSEFSSValidityIndicates the validity of the provided section layer severely errored framing seconds value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.29
olOSCCrntPMSEFSSInitializeUsed to initialize the value of the olOSCCrntPMSEFSSValue object to 0.rw
InitializeCmd
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.30
olOSCCrntPMUASSValueThe count of unavailable seconds at the section layer of the received OSC signal.rw
Unsigned32
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.31
olOSCCrntPMUASSTimeStampThe date and time stamp of the section layer unavailable seconds value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.32
olOSCCrntPMUASSValidityIndicates the validity of the provided section layer unavailable seconds value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.33
olOSCCrntPMUASSInitializeUsed to initialize the value of the olOSCCrntPMUASSValue object to 0.rw
InitializeCmd
.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.34
olOSCHistPMTableA table of historical performance monitoring statistics collected for the optical layer OSC objects on the NE.
SEQUENCE OF OlOSCHistPMEntry
.1.3.6.1.4.1.18070.2.2.1.16.12.2
olOSCHistPMEntryThe row entry object of the optical layer OSC historical performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a historical measurement interval for a given optical layer OSC object.
OlOSCHistPMEntry
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1
olOSCHistPMCpTypeIdxThe type of circuit pack on which the optical layer OSC targeted for PMs is located.
CpType
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.1
olOSCHistPMShelfIdxThe number of the shelf in which the optical layer OSC targeted for PMs is located.
INTEGER (1|11|21|31)
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.2
olOSCHistPMSlotIdxThe number of the slot in which the optical layer OSC targeted for PMs is located.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.3
olOSCHistPMLineIdxThe line number of the OSC targeted for PMs.
INTEGER (1)
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.4
olOSCHistPMIntervalTypeIdxThe type of PM bin according to interval length.
PMIntervalType
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.5
olOSCHistPMIntervalIdxThe specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.6
olOSCHistPMOPRValueThe OSC optical power received on the Line port.ro
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.7
olOSCHistPMOPRTimeStampThe date and time stamp of the optical power received value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.8
olOSCHistPMOPRValidityIndicates the validity of the provided optical power received value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.9
olOSCHistPMOPTValueThe OSC optical power transmitted at the output of the Line port.ro
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.10
olOSCHistPMOPTTimeStampThe date and time stamp of the optical power transmitted value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.11
olOSCHistPMOPTValidityIndicates the validity of the provided optical power transmitted value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.12
olOSCHistPMOBRValueThe OSC optical back-reflected power.ro
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.13
olOSCHistPMOBRTimeStampThe date and time stamp of the optical back-reflected power value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.14
olOSCHistPMOBRValidityIndicates the validity of the provided optical back-reflected power value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.15
olOSCHistPMCVSValueThe count of coding violations at the section layer of the received OSC signal.rw
Unsigned32
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.16
olOSCHistPMCVSTimeStampThe date and time stamp of the section layer coding violations value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.17
olOSCHistPMCVSValidityIndicates the validity of the provided section layer coding violations value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.18
olOSCHistPMCVSInitializeUsed to initialize the value of the olOSCHistPMCVSValue object to 0.rw
InitializeCmd
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.19
olOSCHistPMESSValueThe count of errored seconds at the section layer of the received OSC signal.rw
Unsigned32
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.20
olOSCHistPMESSTimeStampThe date and time stamp of the section layer errored seconds value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.21
olOSCHistPMESSValidityIndicates the validity of the provided section layer errored seconds value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.22
olOSCHistPMESSInitializeUsed to initialize the value of the olOSCHistPMESSValue object to 0.rw
InitializeCmd
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.23
olOSCHistPMSESSValueThe count of severely errored seconds at the section layer of the received OSC signal.rw
Unsigned32
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.24
olOSCHistPMSESSTimeStampThe date and time stamp of the section layer severely errored seconds value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.25
olOSCHistPMSESSValidityIndicates the validity of the provided section layer severely errored seconds value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.26
olOSCHistPMSESSInitializeUsed to initialize the value of the olOSCHistPMSESSValue object to 0.rw
InitializeCmd
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.27
olOSCHistPMSEFSSValueThe count of severely errored framing seconds at the section layer of the received OSC signal.rw
Unsigned32
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.28
olOSCHistPMSEFSSTimeStampThe date and time stamp of the section layer severely errored framing seconds value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.29
olOSCHistPMSEFSSValidityIndicates the validity of the provided section layer severely errored framing seconds value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.30
olOSCHistPMSEFSSInitializeUsed to initialize the value of the olOSCHistPMSEFSSValue object to 0.rw
InitializeCmd
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.31
olOSCHistPMUASSValueThe count of unavailable seconds at the section layer of the received OSC signal.rw
Unsigned32
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.32
olOSCHistPMUASSTimeStampThe date and time stamp of the section layer unavailable seconds value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.33
olOSCHistPMUASSValidityIndicates the validity of the provided section layer unavailable seconds value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.34
olOSCHistPMUASSInitializeUsed to initialize the value of the olOSCHistPMUASSValue object to 0.rw
InitializeCmd
.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.35
olOSCPMThresholdTableA table of threshold levels for performance monitoring counter values on Optical Layer OSC objects, that are used in the generation of threshold crossing alerts.
SEQUENCE OF OlOSCPMThresholdEntry
.1.3.6.1.4.1.18070.2.2.1.16.12.3
olOSCPMThresholdEntryThe row entry object of the optical layer OSC performance monitoring threshold table. Each row of this table contains a set of PM thresholds for a given interval type that applies to an individual optical layer OSC object.
OlOSCPMThresholdEntry
.1.3.6.1.4.1.18070.2.2.1.16.12.3.1
olOSCPMThresholdCpTypeIdxThe type of circuit pack on which the optical layer OSC targeted for PM thresholds is located.
CpType
.1.3.6.1.4.1.18070.2.2.1.16.12.3.1.1
olOSCPMThresholdShelfIdxThe number of the shelf in which the optical layer OSC targeted for PM thresholds is located.
INTEGER (1|11|21|31)
.1.3.6.1.4.1.18070.2.2.1.16.12.3.1.2
olOSCPMThresholdSlotIdxThe number of the slot in which the optical layer OSC targeted for PM thresholds is located.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.12.3.1.3
olOSCPMThresholdLineIdxThe line number of the OSC targeted for PM thresholds.
INTEGER (1)
.1.3.6.1.4.1.18070.2.2.1.16.12.3.1.4
olOSCPMThresholdIntervalTypeIdxThe type of PM bin according to interval length. Thresholds are supported for the 15-minute and 1-day PM bins only.
PMIntervalType
.1.3.6.1.4.1.18070.2.2.1.16.12.3.1.5
olOSCPMThresholdCVSValueThe threshold for the count of coding violations at the section layer.rw
Unsigned32
.1.3.6.1.4.1.18070.2.2.1.16.12.3.1.6
olOSCPMThresholdESSValueThe threshold for the count of errored seconds at the section layer.rw
Unsigned32
.1.3.6.1.4.1.18070.2.2.1.16.12.3.1.7
olOSCPMThresholdSESSValueThe threshold for the count of severely errored seconds at the section layer.rw
Unsigned32
.1.3.6.1.4.1.18070.2.2.1.16.12.3.1.8
olOSCPMThresholdSEFSSValueThe threshold for the count of severely errored framing seconds at the section layer.rw
Unsigned32
.1.3.6.1.4.1.18070.2.2.1.16.12.3.1.9
olOSCPMThresholdUASSValueThe threshold for the count of unavailable seconds at the section layer.rw
Unsigned32
.1.3.6.1.4.1.18070.2.2.1.16.12.3.1.10
olPortCrntPMTableA table of current performance monitoring statistics collected for ports on equipment modules assigned to optical layer groupings.
SEQUENCE OF OlPortCrntPMEntry
.1.3.6.1.4.1.18070.2.2.1.16.12.4
olPortCrntPMEntryThe row entry object of the optical layer port current performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a current measurement interval for a given optical layer port.
OlPortCrntPMEntry
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1
olPortCrntPMCpTypeIdxThe type of circuit pack on which the port targeted for PMs is located.
CpType
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.1
olPortCrntPMShelfIdxThe number of the shelf in which the port targeted for PMs is located.
INTEGER (1|11|21|31)
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.2
olPortCrntPMSlotIdxThe number of the slot in which the port targeted for PMs is located.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.3
olPortCrntPMTypeIdxThe type of port targeted for PMs.
OlPortType
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.4
olPortCrntPMIdxThe number of the port of the specified port type targeted for PMs.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.5
olPortCrntPMIntervalTypeIdxThe type of PM bin according to interval length.
PMIntervalType
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.6
olPortCrntPMOPRValueThe instantaneous optical power received on the port.ro
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.7
olPortCrntPMOPRTimeStampThe date and time stamp of the instantaneous optical power received value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.8
olPortCrntPMOPRValidityIndicates the validity of the provided instantaneous optical power received value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.9
olPortCrntPMOPRMinValueThe minimum optical power received on the port over the interval.ro
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.10
olPortCrntPMOPRMinTimeStampThe date and time stamp of the minimum optical power received value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.11
olPortCrntPMOPRMinValidityIndicates the validity of the provided minimum optical power received value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.12
olPortCrntPMOPRMaxValueThe maximum optical power received on the port over the interval.ro
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.13
olPortCrntPMOPRMaxTimeStampThe date and time stamp of the maximum optical power received value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.14
olPortCrntPMOPRMaxValidityIndicates the validity of the provided maximum optical power received value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.15
olPortCrntPMOPRAvgValueThe average optical power received on the port over the interval.ro
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.16
olPortCrntPMOPRAvgTimeStampThe date and time stamp of the average optical power received value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.17
olPortCrntPMOPRAvgValidityIndicates the validity of the provided average optical power received value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.18
olPortCrntPMOPRStdDevValueThe standard deviation from the average of the optical power received on the port over the interval.ro
FixedX10 UNITS "dB/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.19
olPortCrntPMOPRStdDevTimeStampThe date and time stamp of the standard deviation value for the optical power received.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.20
olPortCrntPMOPRStdDevValidityIndicates the validity of the provided standard deviation value for the optical power received.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.21
olPortCrntPMOPTValueThe instantaneous optical power transmitted on the port.ro
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.22
olPortCrntPMOPTTimeStampThe date and time stamp of the instantaneous optical power transmitted value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.23
olPortCrntPMOPTValidityIndicates the validity of the provided instantaneous optical power transmitted value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.24
olPortCrntPMOPTMinValueThe minimum optical power transmitted on the port over the interval.ro
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.25
olPortCrntPMOPTMinTimeStampThe date and time stamp of the minimum optical power transmitted value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.26
olPortCrntPMOPTMinValidityIndicates the validity of the provided minimum optical power transmitted value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.27
olPortCrntPMOPTMaxValueThe maximum optical power transmitted on the port over the interval.ro
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.28
olPortCrntPMOPTMaxTimeStampThe date and time stamp of the maximum optical power transmitted value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.29
olPortCrntPMOPTMaxValidityIndicates the validity of the provided maximum optical power transmitted value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.30
olPortCrntPMOPTAvgValueThe average optical power transmitted on the port over the interval.ro
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.31
olPortCrntPMOPTAvgTimeStampThe date and time stamp of the average optical power transmitted value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.32
olPortCrntPMOPTAvgValidityIndicates the validity of the provided average optical power transmitted value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.33
olPortCrntPMOPTStdDevValueThe standard deviation from the average of the optical power transmitted on the port over the interval.ro
FixedX10 UNITS "dB/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.34
olPortCrntPMOPTStdDevTimeStampThe date and time stamp of the standard deviation value for the optical power transmitted.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.35
olPortCrntPMOPTStdDevValidityIndicates the validity of the provided standard deviation value for the optical power transmitted.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.36
olPortCrntPMLossRxValueThe optical power loss measured on the port in the receive direction. For a Line port, this represents the span loss. For a DCM port, this is the DCM loss. For a client port, this is the loss of the receive inter-connection fiber.ro
FixedX10 UNITS "dB/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.37
olPortCrntPMLossRxTimeStampThe date and time stamp of the receive loss value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.38
olPortCrntPMLossRxValidityIndicates the validity of the provided receive loss value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.39
olPortCrntPMLossTxValueThe optical power loss measured on the port in the transmit direction. For a Line port, this represents the far-end span loss. For a client port, this is the loss of the transmit inter-connection fiber.ro
FixedX10 UNITS "dB/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.40
olPortCrntPMLossTxTimeStampThe date and time stamp of the transmit loss value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.41
olPortCrntPMLossTxValidityIndicates the validity of the provided transmit loss value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.42
olPortCrntPMInitializeAllUsed to initialize all binned PM values for a given entry in the table.rw
InitializeCmd
.1.3.6.1.4.1.18070.2.2.1.16.12.4.1.43
olPortHistPMTableA table of historical performance monitoring statistics collected for optical layer ports.
SEQUENCE OF OlPortHistPMEntry
.1.3.6.1.4.1.18070.2.2.1.16.12.5
olPortHistPMEntryThe row entry object of the Optical Layer Port Historical Performance Monitoring table. Each row of this table contains a full set of PM statistics and related data for an historical measurement interval for a given optical layer port.
OlPortHistPMEntry
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1
olPortHistPMCpTypeIdxThe type of circuit pack on which the port targeted for PMs is located.
CpType
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.1
olPortHistPMShelfIdxThe number of the shelf in which the port targeted for PMs is located.
INTEGER (1|11|21|31)
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.2
olPortHistPMSlotIdxThe number of the slot in which the port targeted for PMs is located.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.3
olPortHistPMTypeIdxThe type of port targeted for PMs.
OlPortType
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.4
olPortHistPMIdxThe number of the port of the specified port type targeted for PMs.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.5
olPortHistPMIntervalTypeIdxThe type of PM bin according to interval length.
PMIntervalType
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.6
olPortHistPMIntervalIdxThe specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.7
olPortHistPMOPRValueThe instantaneous optical power received on the port.ro
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.8
olPortHistPMOPRTimeStampThe date and time stamp of the instantaneous optical power received value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.9
olPortHistPMOPRValidityIndicates the validity of the provided instantaneous optical power received value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.10
olPortHistPMOPRMinValueThe minimum optical power received on the port over the interval.ro
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.11
olPortHistPMOPRMinTimeStampThe date and time stamp of the minimum optical power received value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.12
olPortHistPMOPRMinValidityIndicates the validity of the provided minimum optical power received value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.13
olPortHistPMOPRMaxValueThe maximum optical power received on the port over the interval.ro
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.14
olPortHistPMOPRMaxTimeStampThe date and time stamp of the maximum optical power received value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.15
olPortHistPMOPRMaxValidityIndicates the validity of the provided maximum optical power received value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.16
olPortHistPMOPRAvgValueThe average optical power received on the port over the interval.ro
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.17
olPortHistPMOPRAvgTimeStampThe date and time stamp of the average optical power received value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.18
olPortHistPMOPRAvgValidityIndicates the validity of the provided average optical power received value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.19
olPortHistPMOPRStdDevValueThe standard deviation from the average of the optical power received on the port over the interval.ro
FixedX10 UNITS "dB/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.20
olPortHistPMOPRStdDevTimeStampThe date and time stamp of the standard deviation value for the optical power received.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.21
olPortHistPMOPRStdDevValidityIndicates the validity of the provided standard deviation value for the optical power received.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.22
olPortHistPMOPTValueThe instantaneous optical power transmitted on the port.ro
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.23
olPortHistPMOPTTimeStampThe date and time stamp of the instantaneous optical power transmitted value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.24
olPortHistPMOPTValidityIndicates the validity of the provided instantaneous optical power transmitted value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.25
olPortHistPMOPTMinValueThe minimum optical power transmitted on the port over the interval.ro
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.26
olPortHistPMOPTMinTimeStampThe date and time stamp of the minimum optical power transmitted value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.27
olPortHistPMOPTMinValidityIndicates the validity of the provided minimum optical power transmitted value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.28
olPortHistPMOPTMaxValueThe maximum optical power transmitted on the port over the interval.ro
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.29
olPortHistPMOPTMaxTimeStampThe date and time stamp of the maximum optical power transmitted value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.30
olPortHistPMOPTMaxValidityIndicates the validity of the provided maximum optical power transmitted value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.31
olPortHistPMOPTAvgValueThe average optical power transmitted on the port over the interval.ro
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.32
olPortHistPMOPTAvgTimeStampThe date and time stamp of the average optical power transmitted value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.33
olPortHistPMOPTAvgValidityIndicates the validity of the provided average optical power transmitted value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.34
olPortHistPMOPTStdDevValueThe standard deviation from the average of the optical power transmitted on the port over the interval.ro
FixedX10 UNITS "dB/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.35
olPortHistPMOPTStdDevTimeStampThe date and time stamp of the standard deviation value for the optical power transmitted.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.36
olPortHistPMOPTStdDevValidityIndicates the validity of the provided standard deviation value for the optical power transmitted.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.37
olPortHistPMLossRxValueThe optical power loss measured on the port in the receive direction. For a Line port, this represents the span loss. For a DCM port, this is the DCM loss. For a client port, this is the loss of the receive inter-connection fiber.ro
FixedX10 UNITS "dB/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.38
olPortHistPMLossRxTimeStampThe date and time stamp of the receive loss value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.39
olPortHistPMLossRxValidityIndicates the validity of the provided receive loss value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.40
olPortHistPMLossTxValueThe optical power loss measured on the port in the transmit direction. For a Line port, this represents the far-end span loss. For a client port, this is the loss of the transmit inter-connection fiber.ro
FixedX10 UNITS "dB/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.41
olPortHistPMLossTxTimeStampThe date and time stamp of the transmit loss value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.42
olPortHistPMLossTxValidityIndicates the validity of the provided transmit loss value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.43
olPortHistPMInitializeAllUsed to initialize all binned PM values for a given entry in the table.rw
InitializeCmd
.1.3.6.1.4.1.18070.2.2.1.16.12.5.1.44
wchCrntPMTableA table of current performance monitoring statistics collected for wavelength channels.
SEQUENCE OF WchCrntPMEntry
.1.3.6.1.4.1.18070.2.2.1.16.12.6
wchCrntPMEntryThe row entry object of the Wavelength Channel Current Performance Monitoring table. Each row of this table contains a full set of PM statistics and related data for a current measurement interval for a wavelength channel object in an optical layer grouping.
WchCrntPMEntry
.1.3.6.1.4.1.18070.2.2.1.16.12.6.1
wchCrntPMCpTypeIdxThe type of circuit pack on which the wavelength channel targeted for PMs is located.
CpType
.1.3.6.1.4.1.18070.2.2.1.16.12.6.1.1
wchCrntPMShelfIdxThe number of the shelf in which the wavelength channel targeted for PMs is located.
INTEGER (1|11|21|31)
.1.3.6.1.4.1.18070.2.2.1.16.12.6.1.2
wchCrntPMSlotIdxThe number of the slot in which the wavelength channel targeted for PMs is located.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.12.6.1.3
wchCrntPMPortTypeIdxThe type of port in which the wavelength channel targeted for PMs is located.
OlPortType
.1.3.6.1.4.1.18070.2.2.1.16.12.6.1.4
wchCrntPMPortIdxThe number of the port of the specified port type in which the wavelength channel targeted for PMs is located.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.12.6.1.5
wchCrntPMIdxThe number of the wavelength channel targeted for PMs.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.12.6.1.6
wchCrntPMIntervalTypeIdxThe type of PM bin according to interval length.
PMIntervalType
.1.3.6.1.4.1.18070.2.2.1.16.12.6.1.7
wchCrntPMOPRValueThe instantaneous optical power received on the channel.ro
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.6.1.8
wchCrntPMOPRTimeStampThe date and time stamp of the instantaneous optical power received value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.6.1.9
wchCrntPMOPRValidityIndicates the validity of the provided instantaneous optical power received value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.6.1.10
wchCrntPMOPRMinValueThe minimum optical power received on the channel over the interval. Can be set to the value 0 to initialize.rw
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.6.1.11
wchCrntPMOPRMinTimeStampThe date and time stamp of the minimum optical power received value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.6.1.12
wchCrntPMOPRMinValidityIndicates the validity of the provided minimum optical power received value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.6.1.13
wchCrntPMOPRMinInitializeUsed to initialize the value of the wchCrntPMOPRMinValue object.rw
InitializeCmd
.1.3.6.1.4.1.18070.2.2.1.16.12.6.1.14
wchCrntPMOPRMaxValueThe maximum optical power received on the channel over the interval. Can be set to the value 0 to initialize.rw
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.6.1.15
wchCrntPMOPRMaxTimeStampThe date and time stamp of the maximum optical power received value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.6.1.16
wchCrntPMOPRMaxValidityIndicates the validity of the provided maximum optical power received value.rw
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.6.1.17
wchCrntPMOPRMaxInitializeUsed to initialize the value of the wchCrntPMOPRMaxValue object.rw
InitializeCmd
.1.3.6.1.4.1.18070.2.2.1.16.12.6.1.18
wchCrntPMOPTValueThe instantaneous optical power transmitted on the channel.ro
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.6.1.19
wchCrntPMOPTTimeStampThe date and time stamp of the instantaneous optical power transmitted value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.6.1.20
wchCrntPMOPTValidityIndicates the validity of the provided instantaneous optical power transmitted value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.6.1.21
wchCrntPMOPTMinValueThe minimum optical power transmitted on the channel over the interval. Can be set to the value 0 to initialize.rw
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.6.1.22
wchCrntPMOPTMinTimeStampThe date and time stamp of the minimum optical power transmitted value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.6.1.23
wchCrntPMOPTMinValidityIndicates the validity of the provided minimum optical power transmitted value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.6.1.24
wchCrntPMOPTMinInitializeUsed to initialize the value of the wchCrntPMOPTMinValue object.rw
InitializeCmd
.1.3.6.1.4.1.18070.2.2.1.16.12.6.1.25
wchCrntPMOPTMaxValueThe maximum optical power transmitted on the channel over the interval. Can be set to the value 0 to initialize.rw
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.6.1.26
wchCrntPMOPTMaxTimeStampThe date and time stamp of the maximum optical power transmitted value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.6.1.27
wchCrntPMOPTMaxValidityIndicates the validity of the provided maximum optical power transmitted value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.6.1.28
wchCrntPMOPTMaxInitializeUsed to initialize the value of the wchCrntPMOPTMaxValue object.rw
InitializeCmd
.1.3.6.1.4.1.18070.2.2.1.16.12.6.1.29
wchHistPMTableA table of historical performance monitoring statistics collected for wavelength channels.
SEQUENCE OF WchHistPMEntry
.1.3.6.1.4.1.18070.2.2.1.16.12.7
wchHistPMEntryThe row entry object of the Wavelength Channel Historical Performance Monitoring table. Each row of this table contains a full set of PM statistics and related data for a wavelength channel object in an optical layer grouping.
WchHistPMEntry
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1
wchHistPMCpTypeIdxThe type of circuit pack on which the wavelength channel targeted for PMs is located.
CpType
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1.1
wchHistPMShelfIdxThe number of the shelf in which the wavelength channel targeted for PMs is located.
INTEGER (1|11|21|31)
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1.2
wchHistPMSlotIdxThe number of the slot in which the wavelength channel targeted for PMs is located.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1.3
wchHistPMPortTypeIdxThe type of port in which the wavelength channel targeted for PMs is located.
OlPortType
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1.4
wchHistPMPortIdxThe number of the port of the specified port type in which the wavelength channel targeted for PMs is located.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1.5
wchHistPMIdxThe number of the wavelength channel targeted for PMs.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1.6
wchHistPMIntervalTypeIdxThe type of PM bin according to interval length.
PMIntervalType
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1.7
wchHistPMIntervalIdxThe specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
INTEGER
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1.8
wchHistPMOPRValueThe instantaneous optical power received on the channel.ro
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1.9
wchHistPMOPRTimeStampThe date and time stamp of the instantaneous optical power received value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1.10
wchHistPMOPRValidityIndicates the validity of the provided instantaneous optical power received value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1.11
wchHistPMOPRMinValueThe minimum optical power received on the channel over the interval. Can be set to the value 0 to initialize the object.rw
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1.12
wchHistPMOPRMinTimeStampThe date and time stamp of the minimum optical power received value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1.13
wchHistPMOPRMinValidityIndicates the validity of the provided minimum optical power received value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1.14
wchHistPMOPRMinInitializeUsed to initialize the value of the wchHistPMOPRMinValue object.rw
InitializeCmd
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1.15
wchHistPMOPRMaxValueThe maximum optical power received on the channel over the interval. Can be set to the value 0 to initialize the object.rw
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1.16
wchHistPMOPRMaxTimeStampThe date and time stamp of the maximum optical power received value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1.17
wchHistPMOPRMaxValidityIndicates the validity of the provided maximum optical power received value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1.18
wchHistPMOPRMaxInitializeUsed to initialize the value of the wchHistPMOPRMaxValue object.rw
InitializeCmd
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1.19
wchHistPMOPTValueThe instantaneous optical power transmitted on the channel.ro
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1.20
wchHistPMOPTTimeStampThe date and time stamp of the instantaneous optical power transmitted value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1.21
wchHistPMOPTValidityIndicates the validity of the provided instantaneous optical power transmitted value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1.22
wchHistPMOPTMinValueThe minimum optical power transmitted on the channel over the interval. Can be set to the value 0 to initialize the object.rw
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1.23
wchHistPMOPTMinTimeStampThe date and time stamp of the minimum optical power transmitted value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1.24
wchHistPMOPTMinValidityIndicates the validity of the provided minimum optical power transmitted value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1.25
wchHistPMOPTMinInitializeUsed to initialize the value of the wchHistPMOPTMinValue object.rw
InitializeCmd
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1.26
wchHistPMOPTMaxValueThe maximum optical power transmitted on the channel over the interval. Can be set to the value 0 to initialize the object.rw
FixedX10 UNITS "dBm/10"
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1.27
wchHistPMOPTMaxTimeStampThe date and time stamp of the maximum optical power transmitted value.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1.28
wchHistPMOPTMaxValidityIndicates the validity of the provided maximum optical power transmitted value.ro
PMValidity
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1.29
wchHistPMOPTMaxInitializeUsed to initialize the value of the wchHistPMOPTMaxValue object.rw
InitializeCmd
.1.3.6.1.4.1.18070.2.2.1.16.12.7.1.30
olOSCEvtNotifications
OBJECT IDENTIFIER
.1.3.6.1.4.1.18070.2.2.2.1.33.1
olOSCStatusChangeEvtNotification of a change in the operational status or operational status qualifier or an optical layer OSC facility.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.1.33.1.0.1
olOSCTcaEvtThis trap provides a threshold crossing alert for a performance monitoring statistic on an optical layer OSC facility.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.1.33.1.0.2
olPortEvtNotifications
OBJECT IDENTIFIER
.1.3.6.1.4.1.18070.2.2.2.1.33.2
olPortStatusChangeEvtNotification of a change in the operational status or operational status qualifier or an optical layer port.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.1.33.2.0.1
wdmEvtNotifications
OBJECT IDENTIFIER
.1.3.6.1.4.1.18070.2.2.2.1.33.3
wdmStatusChangeEvtNotification of a change in the operational status or operational status qualifier or an optical layer WDM object.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.1.33.3.0.1
wchEvtNotifications
OBJECT IDENTIFIER
.1.3.6.1.4.1.18070.2.2.2.1.33.4
wchStatusChangeEvtNotification of a change in the operational status or operational status qualifier or an optical layer WDM object.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.1.33.4.0.1
olOSCCondNotifications
OBJECT IDENTIFIER
.1.3.6.1.4.1.18070.2.2.2.2.28.1
olOSCLossOfLightRxCondThere is no input signal detected for the identified OSC.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.1.0.1
olOSCLossOfLightRxClearA previously active optical layer OSC Receive Loss of Light condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.1.0.2
olOSCLossOfFrameCondThere input OSC signal cannot be framed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.1.0.3
olOSCLossOfFrameClearA previously active optical layer OSC Loss of Frame condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.1.0.4
olOSCLossOfLightTxCondThere is no transmitted signal power detected for the identified OSC.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.1.0.5
olOSCLossOfLightTxClearA previously active optical layer OSC Transmit Loss of Light condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.1.0.6
olOSCFarEndIdMismatchCondThe identifying attributes received for the far-end node do not match the expected identifying attributes.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.1.0.7
olOSCFarEndIdMismatchClearA previously active optical layer OSC Far End Identification Mismatch condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.1.0.8
olOSCFarEndNodeCnfgInconsistentCondThe optical layer group configuration type for the far-end node is inconsistent with the configuration type of the local optical layer group.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.1.0.9
olOSCFarEndNodeCnfgInconsistentClearA previously active optical layer OSC Far End Node Configuration Inconsistent condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.1.0.10
olOSCSpanContCommCondBi-directional control communications with the node at the opposite end of the span section have failed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.1.0.11
olOSCSpanContCommClearA previously active optical layer OSC Section Control Communications condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.1.0.12
olOSCEqlzContCommCondBi-directional control communications with the node at the opposite end of the equalization section have failed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.1.0.13
olOSCEqlzContCommClearA previously active optical layer OSC Equalization Control Communications condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.1.0.14
olOSCOpticalBackReflOutOfSpecCondThe measured optical back reflection of the transmitted OSC signal exceeds the specified maximum.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.1.0.15
olOSCOpticalBackReflOutOfSpecClearA previously active optical layer OSC Optical Back Reflection Out of Specification condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.1.0.16
olOSCOpticalBackReflHighThCondThe measured optical back reflection of the transmitted OSC signal exceeds the high threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.1.0.17
olOSCOpticalBackReflHighThClearA previously active optical layer OSC Optical Back Reflection High Threshold condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.1.0.18
olPortCondNotifications
OBJECT IDENTIFIER
.1.3.6.1.4.1.18070.2.2.2.2.28.2
olPortPowerOutOfSpecRxCondThe power received on the optical port is outside the operating range.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.2.0.1
olPortPowerOutOfSpecRxClearA previously active optical layer port Received Power Out Of Specification condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.2.0.2
olPortLossOfLightRxCondThere is no received optical power detected for the port.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.2.0.3
olPortLossOfLightRxClearA previously active optical layer port Receive Loss of Light condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.2.0.4
olPortLossRxOutOfSpecCondThe optical power loss measured over the span or fiber connection terminating on the port in the receive direction is outside the specification range.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.2.0.5
olPortLossRxOutOfSpecClearA previously active optical layer port Receive Loss out of Specification condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.2.0.6
olPortLossRxHighThCondThe optical power loss measured over the span terminating on the line port in the receive direction is above the high threshold level.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.2.0.7
olPortLossRxHighThClearA previously active optical layer port Receive Loss High Threshold condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.2.0.8
olPortAPSDCondAn automatic power shutdown has been automatically operated on the optical layer port for safety reasons.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.2.0.9
olPortAPSDClearA previously active optical layer port Automatic Power Shutdown condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.2.0.10
olPortPayloadMissingIndCondA Payload Missing Indication has been received on the optical layer port input.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.2.0.11
olPortPayloadMissingIndClearA previously active optical layer port Payload Missing Indication condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.2.0.12
olPortBackwardDefectIndCondA Backward Defect Indication has been received on the optical layer port input.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.2.0.13
olPortBackwardDefectIndClearA previously active optical layer port Backward Defect Indication condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.2.0.14
olPortChannelCountDeficiencyCondA channel count deficiency condition has been raised against the port. This indicates that the number of channels received on the port is less than the number required to maintain stable optical control given the high span loss level detected on the receive span fiber.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.2.0.15
olPortChannelCountDeficiencyClearA previously active optical layer port Channel Count Deficiency condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.2.0.16
olPortConnectionMismatchCondThe identified optical layer port is incorrectly connected and must be re-connected to a different remote end port.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.2.0.17
olPortConnectionMismatchClearA previously active optical layer port Connection Mismatch condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.2.0.18
olPortConnectionValidationTimeoutCondConnection validation could not be performed on the identified optical layer port, which may mean that the port is incorrectly connected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.2.0.19
olPortConnectionValidationTimeoutClearA previously active optical layer port Connection Validation Timeout condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.2.0.20
wdmCondNotifications
OBJECT IDENTIFIER
.1.3.6.1.4.1.18070.2.2.2.2.28.3
wdmInvalidPreAmpOperCnfgCondThe WDM optical pre-amplifier is operating at a configuration which is invalid for the detected loss.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.3.0.1
wdmInvalidPreAmpOperCnfgClearA previously active WDM Invalid Pre-Amplifier Operating Configuration condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.3.0.2
wdmInvalidMidAmpOperCnfgCondThe WDM optical mid-amplifier is operating at a configuration which is invalid for the detected loss.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.3.0.3
wdmInvalidMidAmpOperCnfgClearA previously active WDM Invalid Mid-Amplifier Operating Configuration condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.3.0.4
wdmInvalidBoostAmpOperCnfgCondThe WDM optical booster-amplifier is operating at a configuration which is invalid for the detected loss.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.3.0.5
wdmInvalidBoostAmpOperCnfgClearA previously active WDM Invalid Booster-Amplifier Operating Configuration condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.3.0.6
wchCondNotifications
OBJECT IDENTIFIER
.1.3.6.1.4.1.18070.2.2.2.2.28.4
wchPowerOutOfSpecRxCondThe power received for the wavelength channel is outside the operating range.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.4.0.1
wchPowerOutOfSpecRxClearA previously active Wavelength Channel Received Power Out Of Specification condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.4.0.2
wchLossOfLightRxCondThere is no received optical power detected for the channel.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.4.0.3
wchLossOfLightRxClearA previously active wavelength channel Receive Loss of Light condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.4.0.4
wchPowerOutOfSpecTxCondThe power transmitted for the wavelength channel is outside the operating range.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.4.0.5
wchPowerOutOfSpecTxClearA previously active Wavelength Channel Transmitted Power Out Of Specification condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.4.0.6
wchLossOfLightTxCondThere is no transmitted optical power detected for the channel.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.4.0.7
wchLossOfLightTxClearA previously active wavelength channel Transmitted Loss of Light condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.4.0.8
wchUnequippedCondAn unequipped indication for the wavelength channel has been received from the far-end node of the line span.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.4.0.9
wchUnequippedClearA previously active wavelength channel unequipped indication condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.4.0.10
wchAISCondAn alarm indication signal for the wavelength channel has been received from the far-end node of the line span.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.4.0.11
wchAISClearA previously active wavelength channel alarm indication signal condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.4.0.12
wchPowerOutOfSpecRxHighCondThe power received for the wavelength channel exceeds the upper limit of the normal operating range.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.4.0.13
wchPowerOutOfSpecRxHighClearA previously active Wavelength Channel Received Power Out Of Specification High condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.4.0.14
wchPowerOutOfSpecRxLowCondThe power received for the wavelength channel is below the lower limit of the normal operating range.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.4.0.15
wchPowerOutOfSpecRxLowClearA previously active Wavelength Channel Received Power Out Of Specification Low condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.4.0.16
wchPowerRxHighFailCondThe power received for the wavelength channel exceeds the maximum allowable level. The wavelength channel is declared to be failed at this power level.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.4.0.17
wchPowerRxHighFailClearA previously active Wavelength Channel Received Power High Fail condition has cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.18070.2.2.2.2.28.4.0.18
BTI-OL-MIB - SNMP MIB Reference | MIBs Explorer