BTI-7000-MIB
The external MIB definitions for the BTI 7000 series products.
Main OID:
bti7000Mib.1.3.6.1.4.1.18070.1.3
4153
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
4153 total| Object Name |
|---|
bti7000MibThe external MIB definitions for the BTI 7000 series
products. MODULE-IDENTITY .1.3.6.1.4.1.18070.1.3 |
objects OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1 |
networkElement OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.1 |
neSWVersionThe software version that is active on the NE currently.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.1.1 |
neNumThis is a unique network element number used to identify the
network element and to differentiate it from other NEs in the
management domain.rw INTEGER .1.3.6.1.4.1.18070.2.2.1.1.2 |
neSiteNumThis is a network element site number used to uniquely
identify the site of the NE and to differentiate it from other
NE sites in the management domain.rw INTEGER .1.3.6.1.4.1.18070.2.2.1.1.3 |
neDateAndTimeThe current system date and time, without time zone
information.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.1.4 |
neTimeZoneThe time zone in which the local time of this system is to be
reported. Typically, the time zone is the one in which the
system is physically located.rw TimeZone .1.3.6.1.4.1.18070.2.2.1.1.5 |
neAutoDSTA setting that indicates whether the system time should be
updated automatically in accordance with the daylight savings
time characteristics of the current time zone.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.1.6 |
neGatewayThe default IP routing gateway for network management
interfaces on the node. If not specified, this object returns
a value of 0.0.0.0.rw IpAddress .1.3.6.1.4.1.18070.2.2.1.1.7 |
neSecGatewayThe secondary IP routing gateway for network management
interfaces on the node. If not specified, this object returns
a value of 0.0.0.0.rw IpAddress .1.3.6.1.4.1.18070.2.2.1.1.8 |
neActiveGatewayThe IP routing gateway that is currently active on the node.
If no gateway is active, this object returns a value of
0.0.0.0.ro IpAddress .1.3.6.1.4.1.18070.2.2.1.1.9 |
neAutoProvA setting that specifies if automatic provisioning of
equipment and facilities is enabled. If automatic provisioning
is enabled, this object indicates the default administration
status. The possible values include:
- enabled: Applicable entities are auto provisioned with the
initial state enabled.
- disabled: Applicable entities are auto provisioned with the
initial state disabled.
- autoEnabled: Applicable entities are auto provisioned and
placed into the auto-enabled state.
- autoProvOff: Auto provisioning is disabled.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.1.10 |
neAutoDeProvThe time delay after a physical shelf or circuit pack is
removed from the NE before the provisioned entities that are
supported by the removed equipment are automatically
deprovisioned. If this object is set to a value of 000-00,
auto deprovisioning is disabled.rwobsolete HoursAndMinutes .1.3.6.1.4.1.18070.2.2.1.1.11 |
neAutoEnabledTimerThe system wide default auto-enable timer value. This timer
specifies a time delay after a provisioned facility in the
auto-enabled state is cleared of all alarms before the state
of the facility transitions to enabled. The default value can
be overridden by a facility-specific value that is specified
when the facility is either provisioned or edited in its
respective table.rw HoursAndMinutes .1.3.6.1.4.1.18070.2.2.1.1.12 |
ntpClient OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.1.13 |
ntpClientPollingRateThe polling rate for the NTP client to periodically fetch the
system time from the list of NTP servers configured.rw HoursAndMinutes .1.3.6.1.4.1.18070.2.2.1.1.13.1 |
ntpClientAuthKeyThe NTP authentication key ID, if authentication is required.rwobsolete INTEGER .1.3.6.1.4.1.18070.2.2.1.1.13.2 |
ntpClientSyncStateStatus indicating if the node is in sync with one of the time
servers. Either Y or N.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.1.13.3 |
ntpClientStratumSpecifies the stratum of the timer server the node in in sync
with.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.1.13.4 |
ntpClientRefIPAddrThe IP address of the time server the node is in sync with.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.1.13.5 |
ntpClientAssocTableA list of NTP servers to poll for the system time. The NTP
client then decides which is best clock source. SEQUENCE OF NTPClientAssocEntry .1.3.6.1.4.1.18070.2.2.1.1.13.6 |
ntpClientAssocEntryThe list entry for an NTP server. NTPClientAssocEntry .1.3.6.1.4.1.18070.2.2.1.1.13.6.1 |
ntpClientAssocIdxThe IP address of the NTP server. IpAddress .1.3.6.1.4.1.18070.2.2.1.1.13.6.1.1 |
ntpClientAssocRowStatusUsed to control the addition and deletion of entries in the
NTP client association table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.1.13.6.1.100 |
ntpOldTimeAndDateThe date and time of the system before the NTP client updated the
system clock.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.1.13.7 |
ntpNewTimeAndDateThe new system date and time updated by the NTP client.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.1.13.8 |
ntpRefIPThis the NTP server being used as the clock reference for the system.ro IpAddress .1.3.6.1.4.1.18070.2.2.1.1.13.9 |
ntpRefStratumThis is the stratum of the NTP server being used as the clock
reference for the system.ro Unsigned32 .1.3.6.1.4.1.18070.2.2.1.1.13.10 |
neFPDetectA setting that indicates whether the system should report pack
missing alarms.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.1.14 |
neHTAutoShutdownA system wide setting that specifies whether the circuit pack
pack high temperature automatic shutdown (HTAS) is enabled.
When enabled, the circuit packs which support the HTAS feature
will be automatically powered down if the shutdown temperature
threshold for that circuit pack is exceeded.
There will be alarms indicating that the shutdown has occurred.
The default setting is enabled.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.1.15 |
inventory OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.2 |
shelfInvTableThis table contains one row for every physically detected
shelf on the NE. Each row contains a list of attributes that
pertain to a physical shelf. SEQUENCE OF ShelfInvEntry .1.3.6.1.4.1.18070.2.2.1.2.1 |
shelfInvEntryThe conceptual row object of the shelf inventory table. ShelfInvEntry .1.3.6.1.4.1.18070.2.2.1.2.1.1 |
shelfInvIdxThe number of the shelf. It is set to 1 for the main shelf,
otherwise the object is based on the expansion shelf port on
which the shelf is detected, and the number of hops from the
main shelf.ro INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.2.1.1.1 |
shelfInvExpectedNENameThe NE name expected by the main shelf to be reported by the
expansion shelf as the name of the NE to which it belongs.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.1.1.2 |
shelfInvExpectedIPAddressThe string representation of the NE NMS IP address that is
expected by the main shelf to be reported by the expansion
shelf as the IP address of the NE to which it belongs.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.1.1.3 |
shelfInvExpectedShelfNumThe number of the expansion shelf that is expected by the main
shelf to be reported by the attached shelf.ro INTEGER (11|21|31) .1.3.6.1.4.1.18070.2.2.1.2.1.1.4 |
shelfInvExpectedMSISerialNumThe serial number of the Main Shelf Interface circuit pack
that is expected by the main shelf to be reported by the
expansion shelf as the MSI serial number of the NE main shelf
to which it belongs.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.1.1.5 |
shelfInvDiscoveredNENameThe actual NE name reported by the expansion shelf as the name
of the NE to which it belongs.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.1.1.6 |
shelfInvDiscoveredIPAddressThe string representation of the actual NE NMS IP address
reported by the expansion shelf as the IP address of the NE to
which it belongs.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.1.1.7 |
shelfInvDiscoveredShelfNumThe actual number of the expansion shelf reported by the
attached shelf.ro INTEGER (11|21|31) .1.3.6.1.4.1.18070.2.2.1.2.1.1.8 |
shelfInvDiscoveredMSISerialNumThe actual serial number of the Main Shelf Interface circuit
pack reported by the expansion shelf as the MSI serial number
of the NE main shelf to which it belongs.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.1.1.9 |
shelfInvTypeIndicates if the shelf functions as a main shelf or an
expansion shelf.ro ShelfType .1.3.6.1.4.1.18070.2.2.1.2.1.1.10 |
shelfInvShortNameA concise representation of the shelf brand name.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.1.1.11 |
shelfInvNameThe full representation of the shelf brand name.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.1.1.12 |
shelfInvChassisPECA string representation of the Product Equipment Code for the
shelf chassis alone.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.1.1.13 |
shelfInvChassisCLEIA string representation of the Telcordia Common Language
Equipment Identifier for the shelf chassis alone.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.1.1.14 |
shelfInvAssemblyPECA string representation of the Product Equipment Code for the
shelf assembly, which bundles the shelf chassis, shelf
interface pack, and cooling unit.roobsolete DisplayString .1.3.6.1.4.1.18070.2.2.1.2.1.1.15 |
shelfInvRevThe shelf hardware revision number. A value of 0 indicates
that the revision is unspecified.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.2.1.1.16 |
shelfInvConfigThe shelf configuration with respect to the number of slots
for holding replaceable circuit packs.
Note: This object is no longer supported as of BTI 7000
Release 8.1.0, and is maintained in the MIB for backwards-
compatibility for management of pre-8.1 nodes.rodeprecated ShelfConfigType .1.3.6.1.4.1.18070.2.2.1.2.1.1.17 |
shelfInvUSIThe Unique Serial Identifier (only for FNC-branded equipment)ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.1.1.18 |
shelfInvSerialNumThe serial number of the unit.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.1.1.19 |
shelfInvMfgDateThe shelf manufacture date in the format YYYY-MM-DD.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.1.1.20 |
shelfInvMfgLocThe shelf manufacture location.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.1.1.21 |
shelfInvTestDateThe shelf test date in the format YYYY-MM-DD.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.1.1.22 |
shelfInvTestLocThe shelf test location.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.1.1.23 |
slotInvTableThis table contains one row for every slot on every shelf of
the NE in which a circuit pack or other replaceable unit is
seated. Each row contains a list of attributes that pertain to
the circuit pack within the slot. SEQUENCE OF SlotInvEntry .1.3.6.1.4.1.18070.2.2.1.2.2 |
slotInvEntryThe conceptual row object of the slot inventory table. SlotInvEntry .1.3.6.1.4.1.18070.2.2.1.2.2.1 |
slotInvShelfIdxThe number of the shelf on which the slot inventory item is
detected.ro INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.2.2.1.1 |
slotInvSlotTypeIdxThe type of slot that contains the inventory item.ro SlotType .1.3.6.1.4.1.18070.2.2.1.2.2.1.2 |
slotInvSlotIdxThe number of the slot within the shelf containing the
inventory item. The number is from 1 to 20 for regular circuit
pack slots. For main shelf interface type slots, the number
is set to 0. For 7060/7030/7020 expansion shelf interface and
cooling unit type slots, the number is set to 0.
For 7200 common communications module type slots, the number
is 1 or 2. For 7200 cooling unit type slots, the number is
from 1 to 4.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.2.2.1.3 |
slotInvSWVersionThe version of the software running on the circuit pack in the
given slot.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.2.1.4 |
slotInvPackShortNameA concise representation of the name of the circuit pack or
unit.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.2.1.5 |
slotInvPackNameThe full name of the circuit pack or unit.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.2.1.6 |
slotInvPackPECThe Product Equipment Code for the circuit pack or unit.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.2.1.7 |
slotInvPackCLEIThe Telcordia Common Language Equipment Identifier for the
circuit pack or unit.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.2.1.8 |
slotInvPackSerialNumThe serial number of the unit.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.2.1.9 |
slotInvPackRevThe circuit pack or unit hardware revision number. A value of
0 indicates that the revision is unspecified.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.2.2.1.10 |
slotInvPackMfgDateThe circuit pack manufacture date in the format YYYY-MM-DD.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.2.1.11 |
slotInvPackMfgLocThe circuit pack manufacture location.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.2.1.12 |
slotInvPackTestDateThe circuit pack test date in the format YYYY-MM-DD.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.2.1.13 |
slotInvPackTestLocThe circuit pack test location.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.2.1.14 |
slotInvUpgradeStageThe stage of the circuit pack upgrade process that has been
completed.ro UpgradeCompleteStage .1.3.6.1.4.1.18070.2.2.1.2.2.1.15 |
slotInvUpgradeResultIndicates if the identified stage of the circuit pack upgrade
process has resulted in success or failure.ro Enumeration .1.3.6.1.4.1.18070.2.2.1.2.2.1.16 |
slotInvPackUSIThe Unique Serial Identifier (only for FNC-branded equipment)ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.2.1.17 |
slotInvTempHighThThe circuit pack high temperature threshold.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.2.2.1.18 |
slotInvTempShutdownThThe circuit pack shutdown temperature threshold.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.2.2.1.19 |
pluggableInvTableThis table contains one row for every SFP/XFP or other
pluggable present on any circuit pack or other replaceable
unit present in the NE. Each row contains a list of attributes
that pertain to the detected SFP/XFP. SEQUENCE OF PluggableInvEntry .1.3.6.1.4.1.18070.2.2.1.2.3 |
pluggableInvEntryThe conceptual row object of the pluggable inventory table. PluggableInvEntry .1.3.6.1.4.1.18070.2.2.1.2.3.1 |
pluggableInvShelfIdxThe number of the shelf on which the pluggable inventory item
resides.ro INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.2.3.1.1 |
pluggableInvSlotTypeIdxThe type of slot containing the pluggable inventory item.ro SlotType .1.3.6.1.4.1.18070.2.2.1.2.3.1.2 |
pluggableInvSlotIdxThe number of the slot that contains the pluggable inventory
item.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.2.3.1.3 |
pluggableInvPortIdxThe number of the port on the circuit pack that contains the
pluggable inventory item.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.2.3.1.4 |
pluggableInvTypeThe type of small form-factor pluggable inventory item.ro Enumeration .1.3.6.1.4.1.18070.2.2.1.2.3.1.5 |
pluggableInvPECThe Product Equipment Code for the pluggable inventory item.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.3.1.6 |
pluggableInvCLEIThe Telcordia Common Language Equipment Identifier for the
pluggable inventory item.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.3.1.7 |
pluggableInvVendorNameThe Vendor Name of the pluggable inventory item.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.3.1.8 |
pluggableInvVendorOUIThe Vendor IEEE Organizationally Unique Identifier.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.3.1.9 |
pluggableInvVendorPartNumThe Vendor Part Number.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.3.1.10 |
pluggableInvVendorRevThe Vendor Revision Number.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.3.1.11 |
pluggableInvVendorSerialNumThe Vendor Serial Number.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.3.1.12 |
pluggableInvMfgDateThe manufacture date in the format YYYY-MM-DD..ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.3.1.13 |
pluggableInvConnectorTypeThe type of connector on the pluggable unit.ro Enumeration .1.3.6.1.4.1.18070.2.2.1.2.3.1.14 |
pluggableInvMinBitRateThe minimum bit rate supported by the pluggable. A value of 0
means unspecified.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.2.3.1.15 |
pluggableInvMaxBitRateThe maximum bit rate supported by the pluggable. A value of 0
means unspecified.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.2.3.1.16 |
pluggableInvNomBitRateThe nominal bit rate supported by the pluggable. A value of 0
means unspecified.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.2.3.1.17 |
pluggableInvEncodingA textual comma-delimited list of serial encoding mechanisms
supported by the pluggable.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.3.1.18 |
pluggableInvWavelengthThe wavelength transmitted by the pluggable. A value of 0
means unspecified.ro FixedX100 UNITS "nanometers/100" .1.3.6.1.4.1.18070.2.2.1.2.3.1.19 |
pluggableInvReachThe reach supported by the pluggable. A value of 0 means
unspecified.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.2.3.1.20 |
pluggableInvTxFaultImplIndicates if the pluggable implements the Transmit Fault
signal.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.2.3.1.21 |
pluggableInvLOSImplIndicates if the pluggable implements the Loss of Signal
signal.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.2.3.1.22 |
pluggableInvDDiagImplIndicates if the pluggable implements support for Digital
Diagnostics.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.2.3.1.23 |
pluggableInvTxDisableImplIndicates if the pluggable implements support for disabling
the transmit laser.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.2.3.1.24 |
pluggableInvMediaThe physical media type of the pluggablero Enumeration .1.3.6.1.4.1.18070.2.2.1.2.3.1.25 |
pluggableInvUSIThe Unique Serial Identifier (only for FNC-branded equipment)ro DisplayString .1.3.6.1.4.1.18070.2.2.1.2.3.1.26 |
pluggableInvWavelengthMinThe wavelength minimum for the tunable pluggable. A value of 0
means unspecified.ro FixedX100 UNITS "nanometers/100" .1.3.6.1.4.1.18070.2.2.1.2.3.1.27 |
pluggableInvWavelengthMaxThe wavelength maximum for the tunable pluggable.A value of 0
means unspecified.ro FixedX100 UNITS "nanometers/100" .1.3.6.1.4.1.18070.2.2.1.2.3.1.28 |
pluggableInvWavelengthSpacingThe wavelength spacing for the tunable pluggable. A value of 0
means unspecified.ro INTEGER ( 0 | 50 | 100 ) UNITS "GHz" .1.3.6.1.4.1.18070.2.2.1.2.3.1.29 |
slotInvDataTableThis table contains a listing of any specialized data
records available for the slot inventory entries on the
system. Each row contains a single item of data for a
specialized data record for a slot inventory entry. SEQUENCE OF SlotInvDataEntry .1.3.6.1.4.1.18070.2.2.1.2.4 |
slotInvDataEntryThe conceptual row object of the slot inventory data table. SlotInvDataEntry .1.3.6.1.4.1.18070.2.2.1.2.4.1 |
slotInvDataShelfIdxThe number of the shelf on which the slot inventory item is
detected. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.2.4.1.1 |
slotInvDataSlotTypeIdxThe type of slot that contains the inventory item. SlotType .1.3.6.1.4.1.18070.2.2.1.2.4.1.2 |
slotInvDataSlotIdxThe number of the slot within the shelf containing the
inventory item. The number is from 1 to 20 for regular circuit
pack slots. For shelfInterface and coolingUnit type slots, the
number is set to 0. INTEGER .1.3.6.1.4.1.18070.2.2.1.2.4.1.3 |
slotInvDataRecordIdxThe specialized data record index. Unsigned32 .1.3.6.1.4.1.18070.2.2.1.2.4.1.4 |
slotInvDataNameIdxThe name of the data item. Enumeration .1.3.6.1.4.1.18070.2.2.1.2.4.1.5 |
slotInvDataValueThe value of the data item.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.2.4.1.6 |
equipment OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.3 |
shelfTableThis table contains one row for every provisioned shelf on the
NE. Each row contains a list of attributes that pertain to a
provisioned shelf. SEQUENCE OF ShelfEntry .1.3.6.1.4.1.18070.2.2.1.3.1 |
shelfEntryThe conceptual row object of the shelf table. ShelfEntry .1.3.6.1.4.1.18070.2.2.1.3.1.1 |
shelfIdxThe number of the shelf that has been provisioned. This is set
to 1 for the main shelf. Otherwise, the number is based on the
expansion shelf port number on which this shelf is expected to
be detected and the number of hops from the main shelf.ro INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.3.1.1.1 |
shelfProvConfigThe provisioned configuration for the shelf.
Note: This object is no longer supported as of BTI 7000
Release 8.1.0, and is maintained in the MIB for backwards-
compatibility for management of pre-8.1 nodes.rwdeprecated ShelfConfigType .1.3.6.1.4.1.18070.2.2.1.3.1.1.2 |
shelfDiscConfigThe configuration of the actual shelf discovered.
Note: This object is no longer supported as of BTI 7000
Release 8.1.0, and is maintained in the MIB for backwards-
compatibility for management of pre-8.1 nodes.rodeprecated ShelfConfigType .1.3.6.1.4.1.18070.2.2.1.3.1.1.3 |
shelfTypeIndicates if the provisioned shelf is a main or expansion
shelf. Only expansion shelves can be created. The main shelf
is automatically provisioned and can never be de-provisioned.rw ShelfType .1.3.6.1.4.1.18070.2.2.1.3.1.1.4 |
shelfPECIndicates the provisioned shelf Product Equipment Code. This
is a mandatory object when a row of the shelf table is
created. The PEC can only be set at the time of row creation,
and it cannot be edited later.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.3.1.1.5 |
shelfAdminStatusThe administrative status of the shelf.rw AdminStatus .1.3.6.1.4.1.18070.2.2.1.3.1.1.6 |
shelfOperStatusThe reported operational status of the shelf.ro OperStatus .1.3.6.1.4.1.18070.2.2.1.3.1.1.7 |
shelfOperStatQlfrA textual list of qualifiers of the reported operational
status of the shelf.ro OperStatQlfr .1.3.6.1.4.1.18070.2.2.1.3.1.1.8 |
shelfIdTextual data recorded by the user to describe the provisioned
shelf in a manner useful to the user such as the location
where the shelf is installed.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.3.1.1.9 |
shelfCustom1A variable length text string for operating company use.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.3.1.1.10 |
shelfCustom2A variable length text string for operating company use.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.3.1.1.11 |
shelfCustom3A variable length text string for operating company use.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.3.1.1.12 |
shelfPowerFeedAThe power feed mode for rail A.rw PowerFeedModeType .1.3.6.1.4.1.18070.2.2.1.3.1.1.13 |
shelfPowerFeedBThe power feed mode for rail B.rw PowerFeedModeType .1.3.6.1.4.1.18070.2.2.1.3.1.1.14 |
shelfRowStatusUsed to control the addition and deletion of entries in the
shelf table, which in turn controls provisioning and
deprovisioning of shelf objects.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.3.1.1.100 |
cpTableThis table contains one row for every provisioned circuit pack
on the NE. Each row contains a list of attributes that pertain
to a provisioned circuit pack. SEQUENCE OF CpEntry .1.3.6.1.4.1.18070.2.2.1.3.2 |
cpEntryThe conceptual row object of the circuit pack table. CpEntry .1.3.6.1.4.1.18070.2.2.1.3.2.1 |
cpTypeIdxThe specific type of circuit pack provisioned.ro CpType .1.3.6.1.4.1.18070.2.2.1.3.2.1.1 |
cpShelfIdxThe number of the shelf on which the circuit pack is
provisioned.ro INTEGER (0|1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.3.2.1.2 |
cpSlotIdxThe number of the slot in which the circuit pack is
provisioned.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.3.2.1.3 |
cpPECIndicates the provisioned circuit pack Product Equipment Code.
This is a mandatory object when a row of the circuit pack
table is created. The PEC can only be set at the time of row
creation, and it cannot be edited later.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.3.2.1.4 |
cpAdminStatusThe administrative status of the circuit pack.rw AdminStatus .1.3.6.1.4.1.18070.2.2.1.3.2.1.5 |
cpOperStatusThe reported operational status of the circuit pack.ro OperStatus .1.3.6.1.4.1.18070.2.2.1.3.2.1.6 |
cpOperStatQlfrA textual list of qualifiers of the reported operational
status of the circuit pack.ro OperStatQlfr .1.3.6.1.4.1.18070.2.2.1.3.2.1.7 |
cpIdTextual data recorded by the user to describe the provisioned
circuit pack in a manner useful to the user.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.3.2.1.8 |
cpCustom1A variable length text string for operating company use.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.3.2.1.9 |
cpCustom2A variable length text string for operating company use.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.3.2.1.10 |
cpCustom3A variable length text string for operating company use.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.3.2.1.11 |
cpUpgradeStageUsed in notifications sent during the circuit pack software
upgrade process. It indicates the stage of the circuit pack
upgrade process that has been completed.ro UpgradeCompleteStage .1.3.6.1.4.1.18070.2.2.1.3.2.1.12 |
cpUpgradeResultIndicates if the identified stage of the circuit pack upgrade
process has resulted in success or failure.ro Enumeration .1.3.6.1.4.1.18070.2.2.1.3.2.1.13 |
cpRowStatusUsed to control the addition and deletion of entries in the
circuit pack table, which in turn controls the provisioning
and de-provisioning of circuit pack objects.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.3.2.1.100 |
facilities OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.4 |
oaTableThis table contains one row for every provisioned optical
amplifier facility on the NE. Each row contains a list of
attributes that pertain to the optical amplifier. SEQUENCE OF OaEntry .1.3.6.1.4.1.18070.2.2.1.4.1 |
oaEntryThe conceptual row object of the optical amplifier table. OaEntry .1.3.6.1.4.1.18070.2.2.1.4.1.1 |
oaTypeIdxThe specific type of optical amplifier provisioned.ro OaType .1.3.6.1.4.1.18070.2.2.1.4.1.1.1 |
oaShelfIdxThe number of the shelf on which the optical amplifier
facility is provisioned.ro INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.4.1.1.2 |
oaSlotIdxThe number of the slot in which the optical amplifier facility
is provisioned.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.4.1.1.3 |
oaIdxThe number of the port on the circuit pack on which the
optical amplifier facility is provisioned.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.4.1.1.4 |
oaCaseTempMaxThThe case temperature threshold.rw INTEGER (-32768..32767) UNITS "degrees Celsius" .1.3.6.1.4.1.18070.2.2.1.4.1.1.5 |
oaCaseTempMaxShutdownThThe case temperature shutdown threshold.ro INTEGER (-32768..32767) UNITS "degrees Celsius" .1.3.6.1.4.1.18070.2.2.1.4.1.1.6 |
oaLaserTempMinShutdownThThe laser temperature minimum shutdown threshold. A default
value is provided when the optical amplifier is created based
on the optical amplifier type provisioned.ro INTEGER (-32768..32767) UNITS "degrees Celsius" .1.3.6.1.4.1.18070.2.2.1.4.1.1.7 |
oaLaserTempMaxShutdownThThe laser temperature maximum shutdown threshold. A default
value is provided when the optical amplifier is created based
on the optical amplifier type provisioned.ro INTEGER (-32768..32767) UNITS "degrees Celsius" .1.3.6.1.4.1.18070.2.2.1.4.1.1.8 |
oaOpticalPwrReceivedMinThThe optical power received minimum threshold. A default value
is provided when the optical amplifier is created based on the
optical amplifier type provisioned.rw FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.1.1.9 |
oaOpticalPwrReceivedMaxThThe optical power received maximum threshold. A default value
is provided when the optical amplifier is created based on the
optical amplifier type provisioned.rw FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.1.1.10 |
oaSSIOpticalPwrReceivedMaxThThe secondary stage input optical power received maximum
threshold. This object is applicable only to OLAM type
amplifiers.rw FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.1.1.11 |
oaOpticalPwrTransmittedMinThThe optical power transmitted minimum threshold. A default
value is provided when the optical amplifier is created based
on the optical amplifier type provisioned.rw FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.1.1.12 |
oaOpticalPwrTransmittedMaxThThe optical power transmitted maximum threshold. A default
value is provided when the optical amplifier is created based
on the optical amplifier type provisioned.rw FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.1.1.13 |
oaBackReflectionSafetyThThe optical back reflection safety threshold.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.1.1.14 |
oaMSInsertionLossMaxThThis is the mid-stage maximum insertion loss signal threshold.
It applies to mid-stage access amplifiers only.rw FixedX10 UNITS "dB/10" .1.3.6.1.4.1.18070.2.2.1.4.1.1.15 |
oaCaseTempThe optical amplifier case temperature.ro INTEGER (-32768..32767) UNITS "degrees Celsius" .1.3.6.1.4.1.18070.2.2.1.4.1.1.16 |
oaLaser1TempThe temperature of the optical amplifier laser 1.ro INTEGER (-32768..32767) UNITS "degrees Celsius" .1.3.6.1.4.1.18070.2.2.1.4.1.1.17 |
oaLaser2TempThe temperature of the optical amplifier laser 2.ro INTEGER (-32768..32767) UNITS "degrees Celsius" .1.3.6.1.4.1.18070.2.2.1.4.1.1.18 |
oaOpticalPwrReceivedThe optical power received on the input of the amplifier.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.1.1.19 |
oaSSIOpticalPwrReceivedThe optical power received on the second stage of the
amplifier. It applies to mid-stage access amplifiers only.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.1.1.20 |
oaOpticalPwrTransmittedThe optical power transmitted at the output of the amplifier.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.1.1.21 |
oaMSInsertionLossThe mid-stage insertion loss. This object is only applicable
to OLAM type amplifiers.ro FixedX10 UNITS "dB/10" .1.3.6.1.4.1.18070.2.2.1.4.1.1.22 |
oaEffectiveGainThe effective gain level of the optical amplifier.ro FixedX10 UNITS "dB/10" .1.3.6.1.4.1.18070.2.2.1.4.1.1.33 |
oaFSOOpticalPwrTransmittedThe optical power transmitted at the output of the first stage
of the amplifier. It applies to mid-stage access amplifiers
only.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.1.1.34 |
oaLaser1CurrentThe optical amplifier laser 1 current.ro FixedX10 UNITS "mAmp/10" .1.3.6.1.4.1.18070.2.2.1.4.1.1.35 |
oaLaser2CurrentThe optical amplifier laser 2 current.ro FixedX10 UNITS "mAmp/10" .1.3.6.1.4.1.18070.2.2.1.4.1.1.36 |
oaLaser1PowerThe optical amplifier laser 1 power.ro FixedX10 UNITS "mWatts/10" .1.3.6.1.4.1.18070.2.2.1.4.1.1.37 |
oaLaser2PowerThe optical amplifier laser 2 power.ro FixedX10 UNITS "mWatts/10" .1.3.6.1.4.1.18070.2.2.1.4.1.1.38 |
oaOpticalBackReflectionThe optical back reflection of the amplifier.ro FixedX10 UNITS "dB/10" .1.3.6.1.4.1.18070.2.2.1.4.1.1.39 |
oaVariableOpticalAttenuationThe variable optical attenuation of the amplifier.ro FixedX10 UNITS "dB/10" .1.3.6.1.4.1.18070.2.2.1.4.1.1.40 |
oaAdminStatusThe administrative status of the optical amplifier.rw AdminStatus .1.3.6.1.4.1.18070.2.2.1.4.1.1.41 |
oaOperStatusThe reported operational status of the optical amplifier.ro OperStatus .1.3.6.1.4.1.18070.2.2.1.4.1.1.42 |
oaOperStatQlfrA textual list of qualifiers of the reported operational
status of the optical amplifier.ro OperStatQlfr .1.3.6.1.4.1.18070.2.2.1.4.1.1.43 |
oaAutoEnableTimerSpecifies the auto-enable timer for the targeted optical
amplifier. This value only applies if the oaAdminStatus object
is set to autoEnabled. Otherwise, the value returned is
000-00. The supported range of values is 000-00 to 096-00.rw HoursAndMinutes .1.3.6.1.4.1.18070.2.2.1.4.1.1.44 |
oaActAutoEnableTimerIndicates the time remaining on the auto-enable timer, if it
is actively counting down. Otherwise, the value returned is
000-00.ro HoursAndMinutes .1.3.6.1.4.1.18070.2.2.1.4.1.1.45 |
oaModeSettingThe desired mode of operation to which this optical amplifier
is set.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.4.1.1.46 |
oaGainSettingThe effective gain (excluding ASE) set point. A default value
is provided when the optical amplifier is created based on the
optical amplifier type provisioned.rw FixedX10 UNITS "dB" .1.3.6.1.4.1.18070.2.2.1.4.1.1.47 |
oaPwrSettingThe signal output power (excluding ASE) set point. A default
value is provided when the optical amplifier is created based
on the optical amplifier type provisioned.rw FixedX10 UNITS "dBm" .1.3.6.1.4.1.18070.2.2.1.4.1.1.48 |
oaTiltCompSettingThe desired tilt compensation to which this optical amplifier
is set.rw FixedX10 UNITS "dB" .1.3.6.1.4.1.18070.2.2.1.4.1.1.49 |
oaStatusThe specific operational status of the amplifier.ro Enumeration .1.3.6.1.4.1.18070.2.2.1.4.1.1.50 |
oaLaserStatusThe actual operational status of the optical amplifier laser.ro Enumeration .1.3.6.1.4.1.18070.2.2.1.4.1.1.51 |
oaId1Textual data recorded by the user to describe the provisioned
optical amplifier in a manner useful to the user.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.1.1.52 |
oaId2Textual data recorded by the user to describe the provisioned
optical amplifier in a manner useful to the user.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.1.1.53 |
oaFiberTypeAn optional specification of the fiber type that interfaces
with the optical amplifier.rw FiberType .1.3.6.1.4.1.18070.2.2.1.4.1.1.54 |
oaGridAn optional indication of the WDM grid to which the link
conforms.rw WDMGrid .1.3.6.1.4.1.18070.2.2.1.4.1.1.55 |
oaNumChannelsAn optional indication of the number of channels that the link
is carrying.rw INTEGER .1.3.6.1.4.1.18070.2.2.1.4.1.1.56 |
oaCustom1A variable length text string for operating company use.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.1.1.57 |
oaCustom2A variable length text string for operating company use.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.1.1.58 |
oaCustom3A variable length text string for operating company use.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.1.1.59 |
oaWavelengthThe wavelength transmitted from the OA port. This object
applies only to single channel amplifiers (sba, spa).rw FixedX100 .1.3.6.1.4.1.18070.2.2.1.4.1.1.60 |
oaRemoteIdIdentifies the remote node and port to which the
optical amplifier port is connected, in the format
prescribed by the PSM network management system.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.1.1.61 |
oaRowStatusUsed to control the addition and deletion of entries in the
optical amplifier table, which in turn controls provisioning
and deprovisioning of optical amplifier facilities.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.1.1.100 |
xcvrTableThis table contains one row for every provisioned optical
transceiver on a wavelength translator, regenerator or manager
card. Each row contains a list of attributes that pertain to
the transceiver. SEQUENCE OF XcvrEntry .1.3.6.1.4.1.18070.2.2.1.4.2 |
xcvrEntryThe conceptual row object of the optical transceiver table. XcvrEntry .1.3.6.1.4.1.18070.2.2.1.4.2.1 |
xcvrTypeIdxThe specific type of wavelength conversion function of the
circuit pack on which the transceiver is provisioned.ro XcvrType .1.3.6.1.4.1.18070.2.2.1.4.2.1.1 |
xcvrShelfIdxThe number of the shelf on which the transceiver is
provisioned.ro INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.4.2.1.2 |
xcvrSlotIdxThe number of the slot within which the transceiver is
provisioned.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.4.2.1.3 |
xcvrIdxThe number of the port on the circuit pack on which the
transceiver is provisioned.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.4.2.1.4 |
xcvrOpticalPwrReceivedMinThThis is the optical power received minimum threshold.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.2.1.5 |
xcvrOpticalPwrReceivedMaxThThis is the optical power received maximum threshold.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.2.1.6 |
xcvrOpticalPwrTransmittedMinThThis is the optical power transmitted minimum threshold.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.2.1.7 |
xcvrOpticalPwrTransmittedMaxThThis is the optical power transmitted maximum threshold.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.2.1.8 |
xcvrOpticalPwrReceivedThe optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.2.1.9 |
xcvrOpticalPwrTransmittedThe optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.2.1.10 |
xcvrProtSwEvtTypeIndicates the type of protection switching event that has
occured on an optical transceiver port.ro ProtSwEvtType .1.3.6.1.4.1.18070.2.2.1.4.2.1.11 |
xcvrPECAn optionally provisioned transceiver Product Equipment Code
used to validate the physically present transceiver.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.2.1.12 |
xcvrAdminStatusThe administrative status of the optical transceiver.rw AdminStatus .1.3.6.1.4.1.18070.2.2.1.4.2.1.13 |
xcvrOperStatusThe reported operational status of the optical transceiver.ro OperStatus .1.3.6.1.4.1.18070.2.2.1.4.2.1.14 |
xcvrOperStatQlfrThis is a textual list of qualifiers about the reported
operational status of the optical transceiver.ro OperStatQlfr .1.3.6.1.4.1.18070.2.2.1.4.2.1.15 |
xcvrAutoEnableTimerSpecifies the auto-enable timer for the targeted optical
transceiver. This value only applies if the xcvrAdminStatus
object is set to autoEnabled. Otherwise, the value returned is
000-00.rw HoursAndMinutes .1.3.6.1.4.1.18070.2.2.1.4.2.1.16 |
xcvrActAutoEnableTimerIndicates the time remaining on the auto-enable timer if it is
actively counting down. Otherwise, the value returned is
000-00.ro HoursAndMinutes .1.3.6.1.4.1.18070.2.2.1.4.2.1.17 |
xcvrProtocolThe protocol of the service to be carried by the port. This is
a mandatory object when a row of the transceiver table is
created.rw XcvrProtocolType .1.3.6.1.4.1.18070.2.2.1.4.2.1.18 |
xcvrWavelengthThe wavelength to be transmitted by the transceiver port. This
is a mandatory object when a row of the transceiver table is
created for ports that have a pluggable transceiver.rw FixedX100 .1.3.6.1.4.1.18070.2.2.1.4.2.1.19 |
xcvrVendorPN1An optionally provisioned part number used to validate the
physically present transceiver.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.2.1.20 |
xcvrVendorPN2An optionally provisioned part number used to validate the
physically present transceiver.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.2.1.21 |
xcvrVendorPN3An optionally provisioned part number used to validate the
physically present transceiver.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.2.1.22 |
xcvrPhyPMMonIndicates if the port is configured to report threshold
crossing conditions for physical layer performance monitoring
parameters.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.4.2.1.23 |
xcvrFPSDIndicates if the port is configured for Fault Propagation Shut
Down.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.4.2.1.24 |
xcvrLaserStatusAn indication of the operational status of the transceiver
laser.ro Enumeration .1.3.6.1.4.1.18070.2.2.1.4.2.1.25 |
xcvrId1Textual data recorded by the user to describe the provisioned
optical transceiver in a manner useful to the user.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.2.1.26 |
xcvrId2Textual data recorded by the user to describe the provisioned
optical transceiver in a manner useful to the user.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.2.1.27 |
xcvrFiberTypeAn optional specification of the fiber type that interfaces to
the optical transceiver.rw FiberType .1.3.6.1.4.1.18070.2.2.1.4.2.1.28 |
xcvrGridAn optical indication of the WDM grid the link conforms.rw WDMGrid .1.3.6.1.4.1.18070.2.2.1.4.2.1.29 |
xcvrCustom1A variable length text string for operating company use.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.2.1.30 |
xcvrCustom2A variable length text string for operating company use.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.2.1.31 |
xcvrCustom3A variable length text string for operating company use.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.2.1.32 |
xcvrTraceLabelIf specified, this attribute will describe the trace label to
be used in the outgoing OTN or SONET/SDH trace.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.2.1.33 |
xcvrExpectedTraceLabelThis attribute will describe the trace label that is expected
to be received in the incoming OTN or SONET/SDH trace. If
specified, this expected trace label will be compared to the
actual value for xcvrReceivedTraceLabel, and a trace mismatch
alarm will be raised if the two trace labels do not match.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.2.1.34 |
xcvrReceivedTraceLabelThe actual received trace label on the incoming OTN or
SONET/SDH trace.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.4.2.1.35 |
xcvrSDBERThThe Bit Error Rate threshold above which the Signal Degrade
condition is raised.rw BERType .1.3.6.1.4.1.18070.2.2.1.4.2.1.36 |
xcvrLoopbackTypeThe loopback type that is currently active on the xcvrro LoopbackType .1.3.6.1.4.1.18070.2.2.1.4.2.1.37 |
xcvrRemoteIdIdentifies the remote node and port to which the
transceiver port is connected, in the format
prescribed by the PSM network management system.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.2.1.38 |
xcvrRowStatusUsed to control the addition and deletion of entries in the
Transceiver table, which in turn controls provisioning and
deprovisioning of optical transceiver facilities.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.2.1.100 |
amdTableThis table contains one row for every provisioned active
multiplexer-demultiplexer facility. AMD facilities include AMD
line facilities and AMD channel facilities. Each row contains
a list of attributes that pertain to one facility.obsolete SEQUENCE OF AmdEntry .1.3.6.1.4.1.18070.2.2.1.4.3 |
amdEntryThe conceptual row object of the Active Mux-Demux table.obsolete AmdEntry .1.3.6.1.4.1.18070.2.2.1.4.3.1 |
amdTypeIdxThe specific type of active multiplexer-demultiplexer circuit
pack on which the facility is provisioned.roobsolete AmdType .1.3.6.1.4.1.18070.2.2.1.4.3.1.1 |
amdShelfIdxThe number of the shelf on which the active
multiplexer-demultiplexer facility is provisioned.roobsolete INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.4.3.1.2 |
amdSlotIdxThe number of the slot within which the active
multiplexer-demultiplexer facility is provisioned.roobsolete INTEGER (1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.4.3.1.3 |
amdLineIdxThe number of the multiplexed wavelength line on the AMD
circuit pack.roobsolete INTEGER .1.3.6.1.4.1.18070.2.2.1.4.3.1.4 |
amdPortIdxIdentifies a specific port on the identified line of the AMD
circuit pack.roobsolete AmdPortType .1.3.6.1.4.1.18070.2.2.1.4.3.1.5 |
amdOpticalPwrReceivedMinThThis is the optical power received minimum threshold.rwobsolete FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.3.1.6 |
amdOpticalPwrReceivedMaxThThis is the optical power received maximum threshold.rwobsolete FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.3.1.7 |
amdOpticalPwrTransmittedTargetThis is the optical power transmitted target level.rwobsolete FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.3.1.8 |
amdOpticalAttenuationTargetThis is the optical power attenuation target level.rwobsolete FixedX10 UNITS "dB/10" .1.3.6.1.4.1.18070.2.2.1.4.3.1.9 |
amdOpticalPwrReceivedThe optical input power received for the channel.roobsolete FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.3.1.10 |
amdOpticalPwrTransmittedThe optical power level transmitted for the channel.roobsolete FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.3.1.11 |
amdOpticalAttentuationThe optical power attenuation for the line.roobsolete FixedX10 UNITS "dB/10" .1.3.6.1.4.1.18070.2.2.1.4.3.1.12 |
amdAdminStatusThe administrative status of the AMD port.rwobsolete AdminStatus .1.3.6.1.4.1.18070.2.2.1.4.3.1.13 |
amdOperStatusThe reported operational status of the AMD port.roobsolete OperStatus .1.3.6.1.4.1.18070.2.2.1.4.3.1.14 |
amdOperStatQlfrThis is a textual list of qualifiers about the reported
operational status of the AMD port.roobsolete OperStatQlfr .1.3.6.1.4.1.18070.2.2.1.4.3.1.15 |
amdAutoEnableTimerSpecifies the auto-enable timer for the targeted AMD port.
This value only applies if the amdAdminStatus object is set to
autoEnabled. Otherwise, the value returned is 000-00.rwobsolete HoursAndMinutes .1.3.6.1.4.1.18070.2.2.1.4.3.1.16 |
amdActAutoEnableTimerIndicates the time remaining on the auto-enable timer if it is
actively counting down. Otherwise, the value returned is
000-00.roobsolete HoursAndMinutes .1.3.6.1.4.1.18070.2.2.1.4.3.1.17 |
amdWavelengthThe wavelength transmitted from the AMD port. This object
applies only to channel ports.roobsolete FixedX100 .1.3.6.1.4.1.18070.2.2.1.4.3.1.18 |
amdId1Textual data recorded by the user to describe the provisioned
optical transceiver in a manner useful to the user.rwobsolete DisplayString .1.3.6.1.4.1.18070.2.2.1.4.3.1.19 |
amdId2Textual data recorded by the user to describe the provisioned
optical transceiver in a manner useful to the user.rwobsolete DisplayString .1.3.6.1.4.1.18070.2.2.1.4.3.1.20 |
amdFiberTypeAn optional specification of the fiber type that interfaces to
the AMD port.rwobsolete FiberType .1.3.6.1.4.1.18070.2.2.1.4.3.1.21 |
amdGridAn optical indication of the WDM grid to which the AMD port
link conforms.rwobsolete WDMGrid .1.3.6.1.4.1.18070.2.2.1.4.3.1.22 |
amdCustom1A variable length text string for operating company use.rwobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.3.1.23 |
amdCustom2A variable length text string for operating company use.rwobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.3.1.24 |
amdCustom3A variable length text string for operating company use.rwobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.3.1.25 |
amdRowStatusThe active multiplexer-demultiplexer table RowStatus object is
not readable or writeable because all entries in the AMD table
are automatically created and deleted when the AMD circuit
pack is created or deleted. This AMD row status object is used
only in database change notifications to indicate if the row
has been created or deleted.roobsolete RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.3.1.100 |
passivePortTableThis table contains one row for each port on every provisioned
passive circuit pack on the NE. Each list contains a list of
attributes that pertain to the passive port. SEQUENCE OF PassivePortEntry .1.3.6.1.4.1.18070.2.2.1.4.4 |
passivePortEntryThe conceptual row object of the passive circuit pack port
table. PassivePortEntry .1.3.6.1.4.1.18070.2.2.1.4.4.1 |
passivePortCpTypeIdxThe type of circuit pack on which the passive port is found. CpType .1.3.6.1.4.1.18070.2.2.1.4.4.1.1 |
passivePortShelfIdxThe number of the shelf on which the passive circuit pack port
is provisioned. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.4.4.1.2 |
passivePortSlotIdxThe number of the slot within which the passive circuit pack
port is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.4.4.1.3 |
passivePortLineIdxIdentifies the multiplexed multi-channel optical facility
instance associated with the targeted passive port. INTEGER .1.3.6.1.4.1.18070.2.2.1.4.4.1.4 |
passivePortTypeIdxIdentifies the specific passive port on the circuit pack
according to function. PassivePortType .1.3.6.1.4.1.18070.2.2.1.4.4.1.5 |
passivePortId1An optional name used to identify the passive circuit pack
port facility.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.4.1.6 |
passivePortId2An optional identifier for the passive circuit pack port
circuit.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.4.1.7 |
passivePortFiberTypeAn optional specification of the fiber type interfacing the
passive circuit pack port.rw FiberType .1.3.6.1.4.1.18070.2.2.1.4.4.1.8 |
passivePortGridAn optional indication of the DWM grid that the link conforms
to.rw WDMGrid .1.3.6.1.4.1.18070.2.2.1.4.4.1.9 |
passivePortNumChannelsAn optional indication of the number of channels that the link
is carrying. This field does not apply to individual channel
type ports.rw INTEGER .1.3.6.1.4.1.18070.2.2.1.4.4.1.10 |
passivePortWavelengthAn indication of the wavelength that the port is carrying.ro FixedX100 .1.3.6.1.4.1.18070.2.2.1.4.4.1.11 |
passivePortCustom1A variable length text string for operating company use.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.4.1.12 |
passivePortCustom2A variable length text string for operating company use.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.4.1.13 |
passivePortCustom3A variable length text string for operating company use.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.4.1.14 |
passivePortRemoteIdIdentifies the remote node and port to which the
passive card port is connected, in the format
prescribed by the PSM network management system.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.4.1.15 |
passivePortRowStatusThe passive port table RowStatus object is not readable or
writeable because all entries in the passive port table are
automatically created and deleted when the circuit pack is
created or deleted. This passive port row status object is
used only in database change notifications to indicate if the
row has been created or deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.4.1.100 |
ocnTableThis table contains one row for every provisioned SONET OC-N
facility on the system. Each row contains a list of attributes
that pertain to the facility. SEQUENCE OF OcnEntry .1.3.6.1.4.1.18070.2.2.1.4.5 |
ocnEntryThe conceptual row object of the OC-N table. OcnEntry .1.3.6.1.4.1.18070.2.2.1.4.5.1 |
ocnTypeIdxThe specific type of OC-N signal which is provisioned.ro OcnType .1.3.6.1.4.1.18070.2.2.1.4.5.1.1 |
ocnShelfIdxThe number of the shelf on which the OC-N facility is
provisioned.ro INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.4.5.1.2 |
ocnSlotIdxThe number of the slot within which the OC-N facility is
provisioned.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.4.5.1.3 |
ocnPortIdxThe number of the port on the circuit pack on which the OC-N
facility is provisioned.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.4.5.1.4 |
ocnOpticalPwrReceivedMinThThis is the optical power received minimum threshold.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.5.1.5 |
ocnOpticalPwrReceivedMaxThThis is the optical power received maximum threshold.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.5.1.6 |
ocnOpticalPwrTransmittedMinThThis is the optical power transmitted minimum threshold.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.5.1.7 |
ocnOpticalPwrTransmittedMaxThThis is the optical power transmitted maximum threshold.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.5.1.8 |
ocnOpticalPwrReceivedThe optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.5.1.9 |
ocnOpticalPwrTransmittedThe optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.5.1.10 |
ocnBERThe Bit Error Rate measured on the received signal.ro BERType .1.3.6.1.4.1.18070.2.2.1.4.5.1.11 |
ocnBERThThe Bit Error Rate threshold above which the Signal Degrade
condition is raised.rw BERType .1.3.6.1.4.1.18070.2.2.1.4.5.1.12 |
ocnPECAn optionally provisioned Product Equipment Code used to
validate the physically present optical transceiver on the
OC-N port.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.5.1.13 |
ocnAdminStatusThe administrative status of the OC-N facility.rw AdminStatus .1.3.6.1.4.1.18070.2.2.1.4.5.1.14 |
ocnOperStatusThe reported operational status of the OC-N facility.ro OperStatus .1.3.6.1.4.1.18070.2.2.1.4.5.1.15 |
ocnOperStatQlfrThis is a textual list of qualifiers about the reported
operational status of the OC-N facility.ro OperStatQlfr .1.3.6.1.4.1.18070.2.2.1.4.5.1.16 |
ocnAutoEnableTimerSpecifies the auto-enable timer for the targeted OC-N
facility. This value only applies if the ocnAdminStatus object
is set to autoEnabled. Otherwise, the value returned is
000-00.rw HoursAndMinutes .1.3.6.1.4.1.18070.2.2.1.4.5.1.17 |
ocnActAutoEnableTimerIndicates the time remaining on the auto-enable timer if it is
actively counting down. Otherwise, the value returned is
000-00.ro HoursAndMinutes .1.3.6.1.4.1.18070.2.2.1.4.5.1.18 |
ocnWavelengthThe wavelength to be transmitted by the transceiver on the
OC-N facility port. This is a mandatory object when a row of
the OC-N table is created.rw FixedX100 .1.3.6.1.4.1.18070.2.2.1.4.5.1.19 |
ocnVendorPN1An optionally provisioned part number used to validate the
optical transceiver on the OC-N facility port.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.5.1.20 |
ocnVendorPN2An optionally provisioned part number used to validate the
optical transceiver on the OC-N facility port.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.5.1.21 |
ocnVendorPN3An optionally provisioned part number used to validate the
optical transceiver on the OC-N facility port.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.5.1.22 |
ocnPhyPMMonIndicates if the OC-N facility is configured to report
threshold crossing conditions for physical layer performance
monitoring parameters.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.4.5.1.23 |
ocnLaserStatusAn indication of the operational status of the transceiver
laser on the OC-N facility port.ro Enumeration .1.3.6.1.4.1.18070.2.2.1.4.5.1.24 |
ocnId1Textual data recorded by the user to describe the provisioned
OC-N facility in a manner useful to the user.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.5.1.25 |
ocnFiberTypeAn optional specification of the fiber type that interfaces to
the OC-N facility port.rw FiberType .1.3.6.1.4.1.18070.2.2.1.4.5.1.26 |
ocnCustom1A variable length text string for operating company use.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.5.1.27 |
ocnTOHTransparencyUsed to configure whether the transport overhead of the the
SONET OC-N facility is to be handled transparently or if it is
to be terminated and regenerated. This object only applies to
OC-48 client facilities on the 10G MXP circuit pack and the OC-12
and OC-3 client facilities on the 8-port 2.5G MXP circuit pack.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.4.5.1.28 |
ocnLineMappingUsed to configure the OTN configuration of the line port. If
set to unmapped, there is no OTN digital wrapper added to the
OC-192 or OC-48 facility.
The odu1ToOtu2 and otu2 mapping is applicable to OC-192 line
ports as follows:
odu1ToOtu2 - the line port is configured as an OTN digitally
wrapped OTU2 facility containing 4 ODU1 units.
otu2 - the line port is configured as an OTN digitally
wrapped OTU2 facility to which an OC-192 facility is
directly mapped.
The subOdu1ToOtu1 and otu1 mapping is applicable to OC-48 line
ports as follows:
subOdu1ToOtu1 - the line port is configured as an OTN digitally
wrapped ODU1 facility containing 4 sub-ODU1 units.
otu1 - the line port is configured as an OTN digitally wrapped
OTU1 facility to which an OC-48 facility is directly mapped.
This object applies only to the OC-192 line port of the 10G MXP
circuit pack and the OC-48 line port of the 8-port 2.5G circuit pack.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.4.5.1.29 |
ocnProtSwEvtTypeIndicates the type of protection switching event that has
occured on an OC-N facility.ro ProtSwEvtType .1.3.6.1.4.1.18070.2.2.1.4.5.1.30 |
ocnDCCTransparencyUsed to configure whether the Data Communications Channel (DCC)
is transported transparently through the circuit pack. Specifically,
this refers to the D1, D2 and D3 section DCC bytes.
This object only applies to OC-48 client facilities on the
10G MXP circuit pack and the OC-12 client facilities on the
8-port 2.5G MXP circuit pack.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.4.5.1.31 |
ocnTransparencyChannelUsed to configure the STS1 channel number on which the DCC
is transported. This object only applies to OC-48 client facilities
on the 10G MXP circuit pack and the OC-12 client facilities on the
8-port 2.5G MXP circuit pack.rw INTEGER .1.3.6.1.4.1.18070.2.2.1.4.5.1.32 |
ocnRemoteIdIdentifies the remote node and port to which the
OC-n port is connected, in the format prescribed
by the PSM network management system.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.5.1.33 |
ocnRowStatusUsed to control the addition and deletion of entries in the
OC-N table, which in turn controls provisioning and
deprovisioning of OC-N facilities.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.5.1.100 |
stsnTableThis table contains one row for every created SONET STS-N
facility on the system. Each row contains a list of attributes
that pertain to the facility. SEQUENCE OF StsnEntry .1.3.6.1.4.1.18070.2.2.1.4.6 |
stsnEntryThe conceptual row object of the STS-N table. StsnEntry .1.3.6.1.4.1.18070.2.2.1.4.6.1 |
stsnTypeIdxThe specific type of STS-N signal which is created.ro StsnType .1.3.6.1.4.1.18070.2.2.1.4.6.1.1 |
stsnShelfIdxThe number of the shelf on which the STS-N facility exists.ro INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.4.6.1.2 |
stsnSlotIdxThe number of the slot within which the STS-N facility
exists.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.4.6.1.3 |
stsnPortIdxThe number of the port on the circuit pack on which the STS-N
facility exists.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.4.6.1.4 |
stsnIdxThe stsn channel number within the port in which the STS-N
facility exists.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.4.6.1.5 |
stsnProtSwEvtTypeIndicates the type of protection switching event that has
occured on an STS-N facility.ro ProtSwEvtType .1.3.6.1.4.1.18070.2.2.1.4.6.1.6 |
stsnBERThe Bit Error Rate measured on the received channel.ro BERType .1.3.6.1.4.1.18070.2.2.1.4.6.1.7 |
stsnBERThThe Bit Error Rate threshold above which the Signal Degrade
condition is raised.ro BERType .1.3.6.1.4.1.18070.2.2.1.4.6.1.8 |
stsnProtSwStatusIf the STS-N facility is configured as part of a protection
grouping, this object indicates its protection status.ro OperStatQlfr .1.3.6.1.4.1.18070.2.2.1.4.6.1.9 |
stmnTableThis table contains one row for every provisioned SDH STM-N
facility on the system. Each row contains a list of attributes
that pertain to the facility. SEQUENCE OF StmnEntry .1.3.6.1.4.1.18070.2.2.1.4.7 |
stmnEntryThe conceptual row object of the STM-N table. StmnEntry .1.3.6.1.4.1.18070.2.2.1.4.7.1 |
stmnTypeIdxThe specific type of STM-N signal which is provisioned.ro StmnType .1.3.6.1.4.1.18070.2.2.1.4.7.1.1 |
stmnShelfIdxThe number of the shelf on which the STM-N facility is
provisioned.ro INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.4.7.1.2 |
stmnSlotIdxThe number of the slot within which the STM-N facility is
provisioned.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.4.7.1.3 |
stmnPortIdxThe number of the port on the circuit pack on which the STM-N
facility is provisioned.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.4.7.1.4 |
stmnOpticalPwrReceivedMinThThis is the optical power received minimum threshold.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.7.1.5 |
stmnOpticalPwrReceivedMaxThThis is the optical power received maximum threshold.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.7.1.6 |
stmnOpticalPwrTransmittedMinThThis is the optical power transmitted minimum threshold.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.7.1.7 |
stmnOpticalPwrTransmittedMaxThThis is the optical power transmitted maximum threshold.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.7.1.8 |
stmnOpticalPwrReceivedThe optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.7.1.9 |
stmnOpticalPwrTransmittedThe optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.7.1.10 |
stmnBERThe Bit Error Rate measured on the received signal.ro BERType .1.3.6.1.4.1.18070.2.2.1.4.7.1.11 |
stmnBERThThe Bit Error Rate threshold above which the Signal Degrade
condition is raised.rw BERType .1.3.6.1.4.1.18070.2.2.1.4.7.1.12 |
stmnPECAn optionally provisioned Product Equipment Code used to
validate the physically present optical transceiver on the
STM-N port.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.7.1.13 |
stmnAdminStatusThe administrative status of the STM-N facility.rw AdminStatus .1.3.6.1.4.1.18070.2.2.1.4.7.1.14 |
stmnOperStatusThe reported operational status of the STM-N facility.ro OperStatus .1.3.6.1.4.1.18070.2.2.1.4.7.1.15 |
stmnOperStatQlfrThis is a textual list of qualifiers about the reported
operational status of the STM-N facility.ro OperStatQlfr .1.3.6.1.4.1.18070.2.2.1.4.7.1.16 |
stmnAutoEnableTimerSpecifies the auto-enable timer for the targeted STM-N
facility. This value only applies if the stmnAdminStatus
object is set to autoEnabled. Otherwise, the value returned is
000-00.rw HoursAndMinutes .1.3.6.1.4.1.18070.2.2.1.4.7.1.17 |
stmnActAutoEnableTimerIndicates the time remaining on the auto-enable timer if it is
actively counting down. Otherwise, the value returned is
000-00.ro HoursAndMinutes .1.3.6.1.4.1.18070.2.2.1.4.7.1.18 |
stmnWavelengthThe wavelength to be transmitted by the transceiver on the
STM-N facility port. This is a mandatory object when a row of
the STM-N table is created.rw FixedX100 .1.3.6.1.4.1.18070.2.2.1.4.7.1.19 |
stmnVendorPN1An optionally provisioned part number used to validate the
optical transceiver on the STM-N facility port.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.7.1.20 |
stmnVendorPN2An optionally provisioned part number used to validate the
optical transceiver on the STM-N facility port.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.7.1.21 |
stmnVendorPN3An optionally provisioned part number used to validate the
optical transceiver on the STM-N facility port.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.7.1.22 |
stmnPhyPMMonIndicates if the STM-N facility is configured to report
threshold crossing conditions for physical layer performance
monitoring parameters.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.4.7.1.23 |
stmnLaserStatusAn indication of the operational status of the transceiver
laser on the STM-N facility port.ro Enumeration .1.3.6.1.4.1.18070.2.2.1.4.7.1.24 |
stmnId1Textual data recorded by the user to describe the provisioned
STM-N facility in a manner useful to the user.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.7.1.25 |
stmnFiberTypeAn optional specification of the fiber type that interfaces to
the STM-N facility port.rw FiberType .1.3.6.1.4.1.18070.2.2.1.4.7.1.26 |
stmnCustom1A variable length text string for operating company use.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.7.1.27 |
stmnTOHTransparencyUsed to configure whether the transport overhead of the the
SDH STM-N facility is to be handled transparently or if it is
to be terminated and regenerated. This object only applies to
STM-16 client facilities on the 10G MXP circuit pack and the STM-4
and STM-1 client facilities on the 8-port 2.5G MXP circuit pack.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.4.7.1.28 |
stmnLineMappingUsed to configure the OTN configuration of the line port. If
set to unmapped, there is no OTN digital wrapper added to the
STM-64 or STM-16 facility.
The odu1ToOtu2 and otu2 mapping is applicable to STM-64 line
ports as follows:
odu1ToOtu2 - the line port is configured as an OTN digitally
wrapped OTU2 facility containing 4 ODU1 units.
otu2 - the line port is configured as an OTN digitally
wrapped OTU2 facility to which an STM-64 facility is
directly mapped.
The subOdu1ToOtu1 and otu1 mapping is applicable to STM-16 line
ports as follows:
subOdu1ToOtu1 - the line port is configured as an OTN digitally
wrapped ODU1 facility containing 4 sub-ODU1 units.
otu1 - the line port is configured as an OTN digitally wrapped
OTU1 facility to which an STM-16 facility is directly mapped.
This object applies only to the STM-64 line port of the 10G MXP
circuit pack and the STM-16 line port of the 8-port 2.5G circuit pack.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.4.7.1.29 |
stmnProtSwEvtTypeIndicates the type of protection switching event that has
occured on an STM-N facility.ro ProtSwEvtType .1.3.6.1.4.1.18070.2.2.1.4.7.1.30 |
stmnDCCTransparencyUsed to configure whether the Data Communications Channel (DCC)
is transported transparently through the circuit pack. Specifically,
this refers to the D1, D2 and D3 section DCC bytes.
This object only applies to STM-16 client facilities on the
10G MXP circuit pack and the STM-4 client facilities on the
8-port 2.5G MXP circuit pack.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.4.7.1.31 |
stmnTransparencyChannelUsed to configure the VC4 channel number on which the DCC
is transported. This object only applies to STM-16 client facilities
on the 10G MXP circuit pack and the STM-4 client facilities on the
8-port 2.5G MXP circuit pack.rw INTEGER .1.3.6.1.4.1.18070.2.2.1.4.7.1.32 |
stmnRemoteIdIdentifies the remote node and port to which the
STM-n port is connected, in the format prescribed
by the PSM network management system.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.7.1.33 |
stmnRowStatusUsed to control the addition and deletion of entries in the
STM-N table, which in turn controls provisioning and
deprovisioning of STM-N facilities.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.7.1.100 |
vcnTableThis table contains one row for every created SDH VC-N
facility on the system. Each row contains a list of attributes
that pertain to the facility. SEQUENCE OF VcnEntry .1.3.6.1.4.1.18070.2.2.1.4.8 |
vcnEntryThe conceptual row object of the VC-N table. VcnEntry .1.3.6.1.4.1.18070.2.2.1.4.8.1 |
vcnTypeIdxThe specific type of VC-N signal which is created.ro VcnType .1.3.6.1.4.1.18070.2.2.1.4.8.1.1 |
vcnShelfIdxThe number of the shelf on which the VC-N facility exists.ro INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.4.8.1.2 |
vcnSlotIdxThe number of the slot within which the VC-N facility exists.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.4.8.1.3 |
vcnPortIdxThe number of the port on the circuit pack on which the VC-N
facility exists.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.4.8.1.4 |
vcnIdxThe vcn channel number within the port in which the VC-N
facility exists.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.4.8.1.5 |
vcnProtSwEvtTypeIndicates the type of protection switching event that has
occured on a VC-N facility.ro ProtSwEvtType .1.3.6.1.4.1.18070.2.2.1.4.8.1.6 |
vcnBERThe Bit Error Rate measured on the received channel.ro BERType .1.3.6.1.4.1.18070.2.2.1.4.8.1.7 |
vcnBERThThe Bit Error Rate threshold above which the Signal Degrade
condition is raised.ro BERType .1.3.6.1.4.1.18070.2.2.1.4.8.1.8 |
vcnProtSwStatusIf the VC-N facility is configured as part of a protection
grouping, this object indicates its protection status.ro OperStatQlfr .1.3.6.1.4.1.18070.2.2.1.4.8.1.9 |
geTableThis table contains one row for every provisioned Gigabit
Ethernet (GE) facility on the system. Each row contains a list
of attributes that pertain to the facility. SEQUENCE OF GeEntry .1.3.6.1.4.1.18070.2.2.1.4.9 |
geEntryThe conceptual row object of the GE table. GeEntry .1.3.6.1.4.1.18070.2.2.1.4.9.1 |
geShelfIdxThe number of the shelf on which the GE facility is
provisioned.ro INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.4.9.1.1 |
geSlotIdxThe number of the slot within which the GE facility is
provisioned.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.4.9.1.2 |
gePortIdxThe number of the port on the circuit pack on which the GE
facility is provisioned.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.4.9.1.3 |
geOpticalPwrReceivedMinThThis is the optical power received minimum threshold.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.9.1.4 |
geOpticalPwrReceivedMaxThThis is the optical power received maximum threshold.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.9.1.5 |
geOpticalPwrTransmittedMinThThis is the optical power transmitted minimum threshold.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.9.1.6 |
geOpticalPwrTransmittedMaxThThis is the optical power transmitted maximum threshold.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.9.1.7 |
geOpticalPwrReceivedThe optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.9.1.8 |
geOpticalPwrTransmittedThe optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.9.1.9 |
gePECAn optionally provisioned transceiver Product Equipment Code
used to validate the physically present transceiver on the
Gigabit Ethernet port.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.9.1.10 |
geAdminStatusThe administrative status of the Gigabit Ethernet facility.rw AdminStatus .1.3.6.1.4.1.18070.2.2.1.4.9.1.11 |
geOperStatusThe reported operational status of the Gigabit Ethernet
facility.ro OperStatus .1.3.6.1.4.1.18070.2.2.1.4.9.1.12 |
geOperStatQlfrThis is a textual list of qualifiers about the reported
operational status of the Gigabit Ethernet facility.ro OperStatQlfr .1.3.6.1.4.1.18070.2.2.1.4.9.1.13 |
geAutoEnableTimerSpecifies the auto-enable timer for the targeted Gigabit
Ethernet facility. This value only applies if the
geAdminStatus object is set to autoEnabled. Otherwise, the
value returned is 000-00.rw HoursAndMinutes .1.3.6.1.4.1.18070.2.2.1.4.9.1.14 |
geActAutoEnableTimerIndicates the time remaining on the auto-enable timer if it is
actively counting down. Otherwise, the value returned is
000-00.ro HoursAndMinutes .1.3.6.1.4.1.18070.2.2.1.4.9.1.15 |
geWavelengthThe wavelength to be transmitted by the transceiver on the
Gigabit Ethernet facility port. This is a mandatory object
when a row of the Gigabit Ethernet table is created.rw FixedX100 .1.3.6.1.4.1.18070.2.2.1.4.9.1.16 |
geVendorPN1An optionally provisioned part number used to validate the
optical transceiver on the Gigabit Ethernet facility port.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.9.1.17 |
geVendorPN2An optionally provisioned part number used to validate the
optical transceiver on the Gigabit Ethernet facility port.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.9.1.18 |
geVendorPN3An optionally provisioned part number used to validate the
optical transceiver on the Gigabit Ethernet facility port.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.9.1.19 |
gePhyPMMonIndicates if the Gigabit Ethernet facility is configured to
report threshold crossing conditions for physical layer
performance monitoring parameters.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.4.9.1.20 |
geFPSDIndicates if the Gigabit Ethernet facility is configured for
Fault Propagation Shut Down.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.4.9.1.21 |
geLaserStatusAn indication of the operational status of the transceiver
laser on the Gigabit Ethernet facility port.ro Enumeration .1.3.6.1.4.1.18070.2.2.1.4.9.1.22 |
geId1Textual data recorded by the user to describe the provisioned
Gigabit Ethernet facility in a manner useful to the user.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.9.1.23 |
geFiberTypeAn optional specification of the fiber type that interfaces to
the Gigabit Ethernet facility port.rw FiberType .1.3.6.1.4.1.18070.2.2.1.4.9.1.24 |
geCustom1A variable length text string for operating company use.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.9.1.25 |
geSpeedThe speed of the Gigabit Ethernet facility link.ro Gauge32 UNITS "Mbps" .1.3.6.1.4.1.18070.2.2.1.4.9.1.26 |
geDuplexThe duplex mode of the Gigabit Ethernet facility interface.ro DuplexModeType .1.3.6.1.4.1.18070.2.2.1.4.9.1.27 |
geMediaRateThe configured media rate of the Gigabit Ethernet facility
interface.rw MediaRateType .1.3.6.1.4.1.18070.2.2.1.4.9.1.28 |
geMTUThe MTU size for the Gigabit Ethernet facility interface.ro Integer32 .1.3.6.1.4.1.18070.2.2.1.4.9.1.29 |
geMACAddrThe MAC address of the Gigabit Ethernet facility interface.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.9.1.30 |
geGfpModeConfigures the mapping of GE facility port onto the line port
using either framed or transparent general framing protocol.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.4.9.1.31 |
geFlowControlConfigures the flow control setting of GE facility as
transparent or locally enabled.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.4.9.1.32 |
geRemoteIdIdentifies the remote node and port to which the
gigabit ethernet port is connected, in the format
prescribed by the PSM network management system.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.9.1.33 |
geRowStatusUsed to control the addition and deletion of entries in the
Gigabit Ethernet table, which in turn controls provisioning
and deprovisioning of Gigabit Ethernet facilities.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.9.1.100 |
feTableThis table contains one row for every provisioned Fast
Ethernet (FE) facility on the system. Each row contains a list
of attributes that pertain to the facility. SEQUENCE OF FeEntry .1.3.6.1.4.1.18070.2.2.1.4.10 |
feEntryThe conceptual row object of the FE table. FeEntry .1.3.6.1.4.1.18070.2.2.1.4.10.1 |
feShelfIdxThe number of the shelf on which the FE facility is
provisioned.ro INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.4.10.1.1 |
feSlotIdxThe number of the slot within which the FE facility is
provisioned.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.4.10.1.2 |
fePortIdxThe number of the port on the circuit pack on which the FE
facility is provisioned.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.4.10.1.3 |
feId1Textual data recorded by the user to describe the provisioned
Fast Ethernet facility in a manner useful to the user.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.10.1.4 |
feCustom1A variable length text string for operating company use.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.10.1.5 |
feSpeedThe speed of the Fast Ethernet facility link.ro Gauge32 UNITS "Mbps" .1.3.6.1.4.1.18070.2.2.1.4.10.1.6 |
feDuplexThe duplex mode of the Fast Ethernet facility interface.ro DuplexModeType .1.3.6.1.4.1.18070.2.2.1.4.10.1.7 |
feMediaRateThe configured media rate of the Fast Ethernet facility
interface.ro MediaRateType .1.3.6.1.4.1.18070.2.2.1.4.10.1.8 |
feMTUThe MTU size for the Fast Ethernet facility interface.ro Integer32 .1.3.6.1.4.1.18070.2.2.1.4.10.1.9 |
feMACAddrThe MAC address of the Fast Ethernet facility interface.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.10.1.10 |
feRemoteIdIdentifies the remote node and port to which the
fast ethernet port is connected, in the format
prescribed by the PSM network management system.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.10.1.11 |
feRowStatusUsed to control the addition and deletion of entries in the
Fast Ethernet table, which in turn controls provisioning and
deprovisioning of Fast Ethernet facilities.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.10.1.100 |
vcgTableThis table contains one row for every provisioned Virtual
Concatenation Group (VCG) enitity on the system. Each row
contains a list of attributes that pertain to the VCG. SEQUENCE OF VcgEntry .1.3.6.1.4.1.18070.2.2.1.4.11 |
vcgEntryThe conceptual row object of the VCG table. VcgEntry .1.3.6.1.4.1.18070.2.2.1.4.11.1 |
vcgShelfIdxThe number of the shelf on which the VCG entity is located. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.4.11.1.1 |
vcgSlotIdxThe number of the slot within which the VCG entity is
located. INTEGER .1.3.6.1.4.1.18070.2.2.1.4.11.1.2 |
vcgPortIdxThe number of the port on the circuit pack on which the VCG
entity is located. INTEGER .1.3.6.1.4.1.18070.2.2.1.4.11.1.3 |
vcgIdxThe number of the VCG within the identified port. INTEGER .1.3.6.1.4.1.18070.2.2.1.4.11.1.4 |
vcgTypeThe format of the VCG.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.4.11.1.5 |
vcgTimeSlotIndicesA textual listing of the time slot indices used for the VCG.
The information is formatted as a comma-separated list of of
individual time slot indices or time slot index ranges. For
example, a value of 'X-Y,Z' indicates that the VCG includes
all time slots in the range of X to Y, plus Z, when X, Y, and
Z are all integers.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.11.1.6 |
vcgRowStatusUsed to control the addition and deletion of entries in the
VCG table, which in turn controls provisioning and
deprovisioning of Virtual Concatenation groups. Manual
creation and deletion of VCGs is supported only on the 10G
MXP, as all VCGs on the 2.5G MXP are auto-created and
deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.11.1.100 |
fcTableThis table contains one row for every provisioned fiber
channel facility on the system. Each row contains a list of
attributes that pertain to the facility. SEQUENCE OF FcEntry .1.3.6.1.4.1.18070.2.2.1.4.12 |
fcEntryThe conceptual row object of the fiber channel table. FcEntry .1.3.6.1.4.1.18070.2.2.1.4.12.1 |
fcShelfIdxThe number of the shelf on which the fiber channel facility is
provisioned.ro INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.4.12.1.1 |
fcSlotIdxThe number of the slot within which the fiber channel facility
is provisioned.ro INTEGER (1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.4.12.1.2 |
fcPortIdxThe number of the port on the circuit pack on which the fiber
channel facility is provisioned.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.4.12.1.3 |
fcRateThe rate of the fiber channel signal which is provisioned.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.4.12.1.4 |
fcOpticalPwrReceivedMinThThis is the optical power received minimum threshold.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.12.1.5 |
fcOpticalPwrReceivedMaxThThis is the optical power received maximum threshold.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.12.1.6 |
fcOpticalPwrTransmittedMinThThis is the optical power transmitted minimum threshold.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.12.1.7 |
fcOpticalPwrTransmittedMaxThThis is the optical power transmitted maximum threshold.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.12.1.8 |
fcOpticalPwrReceivedThe optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.12.1.9 |
fcOpticalPwrTransmittedThe optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.12.1.10 |
fcPECAn optionally provisioned Product Equipment Code used to
validate the physically present optical transceiver on the
fiber channel port.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.12.1.11 |
fcAdminStatusThe administrative status of the fiber channel facility.rw AdminStatus .1.3.6.1.4.1.18070.2.2.1.4.12.1.12 |
fcOperStatusThe reported operational status of the fiber channel
facility.ro OperStatus .1.3.6.1.4.1.18070.2.2.1.4.12.1.13 |
fcOperStatQlfrThis is a textual list of qualifiers about the reported
operational status of the fiber channel facility.ro OperStatQlfr .1.3.6.1.4.1.18070.2.2.1.4.12.1.14 |
fcAutoEnableTimerSpecifies the auto-enable timer for the targeted fiber channel
facility. This value only applies if the fcAdminStatus object
is set to autoEnabled. Otherwise, the value returned is
000-00.rw HoursAndMinutes .1.3.6.1.4.1.18070.2.2.1.4.12.1.15 |
fcActAutoEnableTimerIndicates the time remaining on the auto-enable timer if it is
actively counting down. Otherwise, the value returned is
000-00.ro HoursAndMinutes .1.3.6.1.4.1.18070.2.2.1.4.12.1.16 |
fcWavelengthThe wavelength to be transmitted by the transceiver on the
fiber channel facility port. This is a mandatory object when a
row of the fiber channel table is created.rw FixedX100 .1.3.6.1.4.1.18070.2.2.1.4.12.1.17 |
fcVendorPN1An optionally provisioned part number used to validate the
optical transceiver on the fiber channel facility port.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.12.1.18 |
fcVendorPN2An optionally provisioned part number used to validate the
optical transceiver on the fiber channel facility port.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.12.1.19 |
fcVendorPN3An optionally provisioned part number used to validate the
optical transceiver on the fiber channel facility port.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.12.1.20 |
fcPhyPMMonIndicates if the fiber channel facility is configured to
report threshold crossing conditions for physical layer
performance monitoring parameters.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.4.12.1.21 |
fcFPSDIndicates if the Fiber Channel facility is configured for
Fault Propagation Shut Down.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.4.12.1.22 |
fcLaserStatusAn indication of the operational status of the transceiver
laser on the fiber channel facility port.ro Enumeration .1.3.6.1.4.1.18070.2.2.1.4.12.1.23 |
fcId1Textual data recorded by the user to describe the provisioned
fiber channel facility in a manner useful to the user.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.12.1.24 |
fcFiberTypeAn optional specification of the fiber type that interfaces to
the fiber channel facility port.rw FiberType .1.3.6.1.4.1.18070.2.2.1.4.12.1.25 |
fcCustom1A variable length text string for operating company use.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.12.1.26 |
fcGfpModeConfigures the mapping of fiber channel facility port onto the
line port using GFP. Only the transparent mapping is supported
for fiber channel facilities.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.4.12.1.27 |
fcRemoteIdIdentifies the remote node and port to which the
fiber channel port is connected, in the format
prescribed by the PSM network management system.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.12.1.28 |
fcRowStatusUsed to control the addition and deletion of entries in the
fiber channel table, which in turn controls provisioning and
deprovisioning of fiber channel facilities.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.12.1.100 |
ethIntfTableThis table contains one row for every provisioned Ethernet
facility on the system. Each row contains a list of attributes
that pertain to the facility. SEQUENCE OF EthIntfEntry .1.3.6.1.4.1.18070.2.2.1.4.14 |
ethIntfEntryThe conceptual row object of the ethIntfTable table. EthIntfEntry .1.3.6.1.4.1.18070.2.2.1.4.14.1 |
ethIntfShelfIdxThe number of the shelf in which the Ethernet facility
resides.ro INTEGER (1 | 11 | 21 | 31) .1.3.6.1.4.1.18070.2.2.1.4.14.1.1 |
ethIntfSlotIdxThe number of the slot in which the Ethernet facility
resides.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.4.14.1.2 |
ethIntfPortTypeIdxThe type of the port on the circuit pack.ro PvxL1PortType .1.3.6.1.4.1.18070.2.2.1.4.14.1.3 |
ethIntfPortIdxThe number of the port on the circuit pack on which the
ethernet facility is provisioned.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.4.14.1.4 |
ethIntfOpticalPwrReceivedMinThThis is the optical power received minimum threshold.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.14.1.5 |
ethIntfOpticalPwrReceivedMaxThThis is the optical power received maximum threshold.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.14.1.6 |
ethIntfOpticalPwrTransmittedMinThThis is the optical power transmitted minimum threshold.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.14.1.7 |
ethIntfOpticalPwrTransmittedMaxThThis is the optical power transmitted maximum threshold.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.14.1.8 |
ethIntfOpticalPwrReceivedThe optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.14.1.9 |
ethIntfOpticalPwrTransmittedThe optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.14.1.10 |
ethIntfPECAn optionally provisioned transceiver Product Equipment Code
used to validate the physically present transceiver on the
Ethernet port.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.14.1.11 |
ethIntfAdminStatusThe administrative status of the Ethernet facility.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.4.14.1.12 |
ethIntfOperStatusThe reported operational status of the Ethernet facility.ro OperStatus .1.3.6.1.4.1.18070.2.2.1.4.14.1.13 |
ethIntfOperStatQlfrThis is a textual list of qualifiers about the reported
operational status of the Ethernet facility.ro OperStatQlfr .1.3.6.1.4.1.18070.2.2.1.4.14.1.14 |
ethIntfAutoEnableTimerSpecifies the auto-enable timer for the targeted Ethernet
facility. This value only applies if the AdminStatus object is
set to autoEnabled. Otherwise, the value returned is 000-00.rw HoursAndMinutes .1.3.6.1.4.1.18070.2.2.1.4.14.1.15 |
ethIntfActAutoEnableTimerIndicates the time remaining on the auto-enable timer if it is
actively counting down. Otherwise, the value returned is
000-00.ro HoursAndMinutes .1.3.6.1.4.1.18070.2.2.1.4.14.1.16 |
ethIntfWavelengthThe wavelength to be transmitted by the transceiver on the
Gigabit Ethernet facility port. This is a mandatory object
when a row of the Ethernet table is created.rw FixedX100 .1.3.6.1.4.1.18070.2.2.1.4.14.1.17 |
ethIntfVendorPN1An optionally provisioned part number used to validate the
optical transceiver on the Ethernet facility port.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.14.1.18 |
ethIntfVendorPN2An optionally provisioned part number used to validate the
optical transceiver on the Ethernet facility port.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.14.1.19 |
ethIntfVendorPN3An optionally provisioned part number used to validate the
optical transceiver on the Ethernet facility port.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.14.1.20 |
ethIntfPhyPMMonIndicates if the Ethernet facility is configured to report
threshold crossing conditions for physical layer performance
monitoring parameters.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.4.14.1.21 |
ethIntfFPSDIndicates if the Ethernet facility is configured for Fault
Propagation Shut Down.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.4.14.1.22 |
ethIntfLaserStatusAn indication of the operational status of the transceiver
laser on the Ethernet facility port.ro Enumeration .1.3.6.1.4.1.18070.2.2.1.4.14.1.23 |
ethIntfId1Textual data recorded by the user to describe the provisioned
facility in a manner useful to the user.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.14.1.24 |
ethIntfFiberTypeAn optional specification of the fiber type that interfaces to
the Ethernet facility port.rw FiberType .1.3.6.1.4.1.18070.2.2.1.4.14.1.25 |
ethIntfCustom1A variable length text string for operating company use.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.14.1.26 |
ethIntfSpeedThe speed of the Ethernet facility link. This object is
mandatory to create a new facility and determines the type of
interface, based on speed.ro Gauge32 UNITS "Mbps" .1.3.6.1.4.1.18070.2.2.1.4.14.1.27 |
ethIntfDuplexThe duplex mode of the Ethernet facility interface.ro Enumeration .1.3.6.1.4.1.18070.2.2.1.4.14.1.28 |
ethIntfMediaRateThe configured media rate of the Ethernet facility interface.
For 10 GE interfaces, the media rate can only be autoNegotiated.rw MediaRateType .1.3.6.1.4.1.18070.2.2.1.4.14.1.29 |
ethIntfMTUThe MTU size for the Ethernet facility interface.rw INTEGER .1.3.6.1.4.1.18070.2.2.1.4.14.1.30 |
ethIntfLinkStatusThis object provides the link status information regarding the
particular interface.ro Enumeration .1.3.6.1.4.1.18070.2.2.1.4.14.1.31 |
ethIntfLagIdThis object provides the information regarding the LAG Id of
the particular interface.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.4.14.1.32 |
ethIntfLagPortPriorityThis object provides the information for lag port priority of
the particular interface.rw Integer32 .1.3.6.1.4.1.18070.2.2.1.4.14.1.33 |
ethIntfBERThe Signal Degrade Bit Error Ratio (SDBER) is used to
configure the error rate threshold above which a Signal
Degrade is declared.rw BERType .1.3.6.1.4.1.18070.2.2.1.4.14.1.37 |
ethIntfMACAddrThe MAC address of the interface.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.14.1.39 |
ethIntfLineMappingFor 10 GE interfaces, both 10 GE LAN PHY and OTU2 encapsulated
10GE LAN PHY will be supported. The line mapping attribute
allow provisioning of either of the protocol. This attributes
applies to 10 GE interfaces only. When a 10 GE interface is configured
as a stacking port, this field is set to stacking.
NOTE: This parameter does not apply to gigabitEthernet type
interfaces, attempts to set this for gigE port types will fail.
Reading this object for non-10GigE interfaces will return
notApplicable.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.4.14.1.40 |
ethIntfErrorCorrectionFor 10G in OTU2 line-mapping mode, this object specifies
the error correction mode. For interfaces in tenlanphy
line-mapping mode, this object must be none. Attempts to
set it to any other value while in tenglanphy mode will fail.
NOTE: This parameter does not apply to gigabitEthernet type
interfaces, attempts to set this for gigE port types will fail.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.4.14.1.41 |
ethIntfLpbkOpCmdUsed to perform a loopback operation on a transceiver facility
as follows:
- oprLpbk: operates a loopback on the transceiver
- rlsLpbk: causes a previously invoked loopback to be released
When read, this object returns noOp.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.4.14.1.42 |
ethIntfRemoteIdIdentifies the remote node and port to which the
PVX ethernet port is connected, in the format
prescribed by the PSM network management system.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.14.1.43 |
ethIntfMirrorConfigMirror configuration for the physical ethernet portrw MirrorConfigType .1.3.6.1.4.1.18070.2.2.1.4.14.1.44 |
ethIntfLldpAdminStatusThe administratively desired status of the local LLDP agent.
If the associated ethIntfLldpAdminStatus object has a
value of 'enabled(1)', then the LLDP agent will transmit
and receive LLDP frames on this port.
If the associated ethIntfLldpAdminStatus object has a
value of 'disabled(2)', then LLDP agent will not transmit or
receive LLDP frames on this port. If there is remote systems
information which is received on this port and stored in
other tables, before the port's ethIntfLldpAdminStatus
becomes disabled, then the information will naturally age out.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.4.14.1.45 |
ethIntfLldpRemChassisIdSubtypeThe type of encoding used to identify the chassis associated
with the remote system.ro LldpChassisIdSubtype .1.3.6.1.4.1.18070.2.2.1.4.14.1.46 |
ethIntfLldpRemChassisIdThe string value used to identify the chassis component
associated with the remote system.ro LldpChassisId .1.3.6.1.4.1.18070.2.2.1.4.14.1.47 |
ethIntfLldpRemPortIdSubtypeThe type of port identifier encoding used in the associated
'ethIntfLldpRemPortId' object.ro LldpPortIdSubtype .1.3.6.1.4.1.18070.2.2.1.4.14.1.48 |
ethIntfLldpRemPortIdThe string value used to identify the port component
associated with the remote system.ro LldpPortId .1.3.6.1.4.1.18070.2.2.1.4.14.1.49 |
ethIntfBouncingStateChangeCountCount of the Ethernet facility operational state changes sinse last rebootro Integer32 .1.3.6.1.4.1.18070.2.2.1.4.14.1.50 |
ethIntfRowStatusUsed to control the addition and deletion of entries in the
Ethernet table, which in turn controls provisioning and
deprovisioning of Ethernet facilities.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.14.1.100 |
odunTableThis table contains one row for every ODU-N
facility on the system. SEQUENCE OF OdunEntry .1.3.6.1.4.1.18070.2.2.1.4.15 |
odunEntryThe conceptual row object of the ODU-N table. OdunEntry .1.3.6.1.4.1.18070.2.2.1.4.15.1 |
odunTypeIdxThe specific type of ODU-N which is provisioned.ro OdunType .1.3.6.1.4.1.18070.2.2.1.4.15.1.1 |
odunShelfIdxThe number of the shelf on which the ODU-N facility is
provisioned.ro INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.4.15.1.2 |
odunSlotIdxThe number of the slot within which the ODU-N facility is
provisioned.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.4.15.1.3 |
odunPortIdxThe number of the port on the circuit pack on which the ODU-N
facility is provisioned.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.4.15.1.4 |
odunIdxThe ODU-N channel number within the port in which the ODU-N
facility exists.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.4.15.1.5 |
briTableThis table contains one row for every provisioned
Bit Rate Independent (BRI) facility on the system.
Each row contains a list of attributes that pertain
to the facility. SEQUENCE OF BriEntry .1.3.6.1.4.1.18070.2.2.1.4.16 |
briEntryThe conceptual row object of the BRI table. BriEntry .1.3.6.1.4.1.18070.2.2.1.4.16.1 |
briShelfIdxThe number of the shelf on which the BRI facility is
provisioned.ro INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.4.16.1.1 |
briSlotIdxThe number of the slot within which the BRI facility
is provisioned.ro INTEGER (1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.4.16.1.2 |
briPortIdxThe number of the port on the circuit pack on which the
BRI facility is provisioned.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.4.16.1.3 |
briProtocolThe protocol of the BRI signal which is provisioned.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.4.16.1.4 |
briOpticalPwrReceivedMinThThis is the optical power received minimum threshold.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.16.1.5 |
briOpticalPwrReceivedMaxThThis is the optical power received maximum threshold.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.16.1.6 |
briOpticalPwrTransmittedMinThThis is the optical power transmitted minimum threshold.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.16.1.7 |
briOpticalPwrTransmittedMaxThThis is the optical power transmitted maximum threshold.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.16.1.8 |
briOpticalPwrReceivedThe optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.16.1.9 |
briOpticalPwrTransmittedThe optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.4.16.1.10 |
briPECAn optionally provisioned Product Equipment Code used to
validate the physically present optical transceiver on the
BRI port.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.16.1.11 |
briAdminStatusThe administrative status of the BRI facility.rw AdminStatus .1.3.6.1.4.1.18070.2.2.1.4.16.1.12 |
briOperStatusThe reported operational status of the BRI facility.ro OperStatus .1.3.6.1.4.1.18070.2.2.1.4.16.1.13 |
briOperStatQlfrThis is a textual list of qualifiers about the reported
operational status of the BRI facility.ro OperStatQlfr .1.3.6.1.4.1.18070.2.2.1.4.16.1.14 |
briAutoEnableTimerSpecifies the auto-enable timer for the targeted BRI
facility. This value only applies if the briAdminStatus object
is set to autoEnabled. Otherwise, the value returned is
000-00.rw HoursAndMinutes .1.3.6.1.4.1.18070.2.2.1.4.16.1.15 |
briActAutoEnableTimerIndicates the time remaining on the auto-enable timer if it is
actively counting down. Otherwise, the value returned is
000-00.ro HoursAndMinutes .1.3.6.1.4.1.18070.2.2.1.4.16.1.16 |
briWavelengthThe wavelength to be transmitted by the transceiver on the
BRI facility port. This is a mandatory object when a
row of the fiber channel table is created.rw FixedX100 .1.3.6.1.4.1.18070.2.2.1.4.16.1.17 |
briVendorPN1An optionally provisioned part number used to validate the
optical transceiver on the BRI facility port.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.16.1.18 |
briVendorPN2An optionally provisioned part number used to validate the
optical transceiver on the BRI facility port.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.16.1.19 |
briVendorPN3An optionally provisioned part number used to validate the
optical transceiver on the BRI facility port.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.16.1.20 |
briPhyPMMonIndicates if the BRI facility is configured to
report threshold crossing conditions for physical layer
performance monitoring parameters.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.4.16.1.21 |
briLaserStatusAn indication of the operational status of the transceiver
laser on the BRI facility port.ro Enumeration .1.3.6.1.4.1.18070.2.2.1.4.16.1.22 |
briId1Textual data recorded by the user to describe the provisioned
BRI facility in a manner useful to the user.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.4.16.1.23 |
briFiberTypeAn optional specification of the fiber type that interfaces to
the BRI facility port.rw FiberType .1.3.6.1.4.1.18070.2.2.1.4.16.1.24 |
briCustom1A variable length text string for operating company use.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.16.1.25 |
briBitRateThe bit rate transmitted by the BRI facility port in Mbps.ro FixedX100 .1.3.6.1.4.1.18070.2.2.1.4.16.1.26 |
briRemoteIdIdentifies the remote node and port to which the
Bitrate Independent port is connected, in the
format prescribed by the PSM network management
system.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.16.1.27 |
briRowStatusUsed to control the addition and deletion of entries in the
BRI table, which in turn controls provisioning and
deprovisioning of BRI facilities.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.4.16.1.100 |
dataComms OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.5 |
oscTableThis table contains one row for every provisioned optical
supervisory channel interface on the NE. Each row contains a
list of attributes that pertain to the OSC. SEQUENCE OF OscEntry .1.3.6.1.4.1.18070.2.2.1.5.1 |
oscEntryThe conceptual row object of the optical supervisory channel
table. OscEntry .1.3.6.1.4.1.18070.2.2.1.5.1.1 |
oscShelfIdxThe number of the shelf on which the OSC is provisioned.ro INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.5.1.1.1 |
oscSlotIdxThe number of the slot in which the OSC is provisioned.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.5.1.1.2 |
oscIdxThe number of the port on the circuit pack on which the OSC is
provisioned.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.5.1.1.3 |
oscAdminStatusThe administrative status of the OSC interface.rw AdminStatus .1.3.6.1.4.1.18070.2.2.1.5.1.1.4 |
oscOperStatusThe reported operational status of the OSC interface.ro OperStatus .1.3.6.1.4.1.18070.2.2.1.5.1.1.5 |
oscOperStatQlfrA textual list of qualifiers for the reported operational
status of the OSC interface.ro OperStatQlfr .1.3.6.1.4.1.18070.2.2.1.5.1.1.6 |
oscCustom1A variable length text string for operating company use.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.5.1.1.7 |
oscTypeThe type of physical communication medium attached to the OSC
interface.ro Enumeration .1.3.6.1.4.1.18070.2.2.1.5.1.1.8 |
oscUnmbrdIndicates whether or not the OSC interface is the type that
requires an IP address to be assigned.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.5.1.1.9 |
oscSpeedThe speed of the OSC link.ro Gauge32 UNITS "Mbps" .1.3.6.1.4.1.18070.2.2.1.5.1.1.10 |
oscDuplexThe duplex mode of the OSC interface.ro DuplexModeType .1.3.6.1.4.1.18070.2.2.1.5.1.1.11 |
oscMediaRateThe configured media rate of the OSC interface.ro MediaRateType .1.3.6.1.4.1.18070.2.2.1.5.1.1.12 |
oscMTUThe MTU size for the OSC interface.ro Integer32 .1.3.6.1.4.1.18070.2.2.1.5.1.1.13 |
oscMACAddrThe MAC address of the OSC interface.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.5.1.1.14 |
oscIPAddrThe IP Address of the OSC interface. A value of 0.0.0.0
indicates that the interface is not assigned an IP address.rw IpAddress .1.3.6.1.4.1.18070.2.2.1.5.1.1.15 |
oscIPMaskThe IP Subnet Mask of the OSC interface.rw IpAddress .1.3.6.1.4.1.18070.2.2.1.5.1.1.16 |
oscIPBcastThe IP broadcast address of the OSC interface.ro IpAddress .1.3.6.1.4.1.18070.2.2.1.5.1.1.17 |
oscRowStatusUsed to control the addition and deletion of entries in the
OSC table, which in turn controls provisioning and
deprovisioning of OSC interfaces.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.5.1.1.100 |
netMgmtTableThis table contains one row for every network management
interface on the NE. Each row contains a list of attributes
that pertain to the interface. SEQUENCE OF NetMgmtEntry .1.3.6.1.4.1.18070.2.2.1.5.2 |
netMgmtEntryThe conceptual row object of the network management interface
table. NetMgmtEntry .1.3.6.1.4.1.18070.2.2.1.5.2.1 |
netMgmtIdxIdentifies the specific management interface. Enumeration .1.3.6.1.4.1.18070.2.2.1.5.2.1.1 |
netMgmtAdminStatusThe administrative status of the management interface.rw AdminStatus .1.3.6.1.4.1.18070.2.2.1.5.2.1.2 |
netMgmtOperStatusThe reported operational status of the management interface.ro OperStatus .1.3.6.1.4.1.18070.2.2.1.5.2.1.3 |
netMgmtOperStatQlfrA textual list of qualifiers for the reported operational
status of the management interface.ro OperStatQlfr .1.3.6.1.4.1.18070.2.2.1.5.2.1.4 |
netMgmtIPAddrThe IP Address of the management interface.rw IpAddress .1.3.6.1.4.1.18070.2.2.1.5.2.1.5 |
netMgmtIPMaskThe IP Subnet Mask of the management interface.rw IpAddress .1.3.6.1.4.1.18070.2.2.1.5.2.1.6 |
netMgmtIPBcastThe IP broadcast address of the management interface.ro IpAddress .1.3.6.1.4.1.18070.2.2.1.5.2.1.7 |
netMgmtCustom1A variable length text string for operating company use.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.5.2.1.8 |
netMgmtTypeThe type of physical communication medium attached to the
management interface.ro Enumeration .1.3.6.1.4.1.18070.2.2.1.5.2.1.9 |
netMgmtUnmbrdIndicates whether or not the management interface is the type
that requires an IP address to be assigned.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.5.2.1.10 |
netMgmtSpeedThe speed of the management interface link.ro Gauge32 UNITS "Mbps" .1.3.6.1.4.1.18070.2.2.1.5.2.1.11 |
netMgmtDuplexThe duplex mode of the management interface.ro DuplexModeType .1.3.6.1.4.1.18070.2.2.1.5.2.1.12 |
netMgmtMediaRateThe configured media rate of the management interface.ro MediaRateType .1.3.6.1.4.1.18070.2.2.1.5.2.1.13 |
netMgmtMTUThe MTU size for this management interface.ro Integer32 .1.3.6.1.4.1.18070.2.2.1.5.2.1.14 |
netMgmtMACAddrThe MAC address of the management interface.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.5.2.1.15 |
serialTableA table of serial communication ports on the network element.
Each row contains a list of attributes that pertain to a given
serial port. SEQUENCE OF SerialEntry .1.3.6.1.4.1.18070.2.2.1.5.3 |
serialEntryThe conceptual row object for the serial port table. SerialEntry .1.3.6.1.4.1.18070.2.2.1.5.3.1 |
serialPortIdxThe serial port instance on the NE. INTEGER .1.3.6.1.4.1.18070.2.2.1.5.3.1.1 |
serialBaudRateThe baud rate of the serial port.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.5.3.1.2 |
serialDataBitsThe number of data bits of the serial port.rw INTEGER .1.3.6.1.4.1.18070.2.2.1.5.3.1.3 |
serialParityThe parity value of the serial port.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.5.3.1.4 |
serialStopBitsThe number of stop bits of the serial port.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.5.3.1.5 |
gcc0ConfigTableA table of GCC0 configuration information.
This table contains one row for every provisioned GCC0. SEQUENCE OF Gcc0ConfigEntry .1.3.6.1.4.1.18070.2.2.1.5.4 |
gcc0ConfigEntryA conceptual row that contains GCC0 configuration
information of an interface. Each instance must
correspond to an instance of an OTN Port
capable of supporting GCC.
Instances of this conceptual row persist across
agent restarts. Gcc0ConfigEntry .1.3.6.1.4.1.18070.2.2.1.5.4.1 |
gcc0ConfigCpTypeIdxThe specific type of circuit pack provisioned. CpType .1.3.6.1.4.1.18070.2.2.1.5.4.1.1 |
gcc0ConfigShelfIdxThe number of the shelf on which the gcc0 is provisioned. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.5.4.1.2 |
gcc0ConfigSlotIdxThe number of the slot in which the gcc0 is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.5.4.1.3 |
gcc0ConfigPortIdxThe number of the port on the circuit pack on which the
gcc0 provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.5.4.1.4 |
gcc0ConfigModeThe desired mode to which the gcc0 is to be provisioned.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.5.4.1.5 |
gcc0ConfigAdminStatusThe administrative status of the gcc.rw AdminStatus .1.3.6.1.4.1.18070.2.2.1.5.4.1.6 |
gcc0ConfigOperStatusThe reported operational status of the gcc.ro OperStatus .1.3.6.1.4.1.18070.2.2.1.5.4.1.7 |
gcc0ConfigOperStatQlfrA textual list of qualifiers of the reported operational
status of the gcc.ro OperStatQlfr .1.3.6.1.4.1.18070.2.2.1.5.4.1.8 |
gcc0ConfigRowStatusThis columnar object is used for creating and deleting a
conceptual row of the gcc0 config table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.5.4.1.9 |
ipExtInterfaceTable SEQUENCE OF IPExtInterfaceTableEntry .1.3.6.1.4.1.18070.2.2.1.5.5 |
ipExtInterfaceTableEntry IPExtInterfaceTableEntry .1.3.6.1.4.1.18070.2.2.1.5.5.1 |
pvxL2IntfSubPortNumberA number indentifying a entity smaller than and contained
in a port. At this time, this value is unused and must be
zero. Integer32 .1.3.6.1.4.1.18070.2.2.1.5.5.1.1 |
ipExtIntfPrimaryStateThe reported operational status of the IP Interface.ro OperStatus .1.3.6.1.4.1.18070.2.2.1.5.5.1.2 |
ipExtIntfSecondaryStateA textual list of qualifiers for the reported operational
status of the IP Interfacero OperStatQlfr .1.3.6.1.4.1.18070.2.2.1.5.5.1.3 |
ipExtIntfCmdPrimaryStatero OperStatus .1.3.6.1.4.1.18070.2.2.1.5.5.1.4 |
ipExtIntfNumberedStatusSet to true if this is a numbered interface and false
if it is unnumbered.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.5.5.1.5 |
ipExtIntfAddressTypeThe type of addresses (v4/v6) used in this row of
this MIB. Currently only ipv4 is allowed in this table.ro InetAddressType .1.3.6.1.4.1.18070.2.2.1.5.5.1.6 |
ipExtIntfAddressThe IP Address associated with the interface.ro InetAddress .1.3.6.1.4.1.18070.2.2.1.5.5.1.7 |
ipExtIntfSubnetMaskThe sub-net mask associated with the interface.ro InetAddress .1.3.6.1.4.1.18070.2.2.1.5.5.1.8 |
ipExtIntfProxyARPStatusNot currently implemented.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.5.5.1.9 |
ipExtIntfDescriptionA string describing the interface.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.5.5.1.10 |
ipExtIntfMACAddrThe MAC address associated with the interface, if
applicable. All zeros for a non-MAC interface.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.5.5.1.11 |
ipExtIntfOperStatusro OperStatus .1.3.6.1.4.1.18070.2.2.1.5.5.1.12 |
ipExtIntfTypeA value describing the type of interface.ro Enumeration .1.3.6.1.4.1.18070.2.2.1.5.5.1.13 |
ipExtIntfBroadcastAddressThe broadcast address associated with the interface.ro InetAddress .1.3.6.1.4.1.18070.2.2.1.5.5.1.14 |
ipExtIntfSpeedro Gauge32 .1.3.6.1.4.1.18070.2.2.1.5.5.1.15 |
ipExtIntfModeIs the interface full or half-duplex?ro DuplexModeType .1.3.6.1.4.1.18070.2.2.1.5.5.1.16 |
ipExtIntfMTUSizeThe Maximum Transmission Unit for the interface.ro Integer32 .1.3.6.1.4.1.18070.2.2.1.5.5.1.17 |
ipExtIntfLastChangero Integer32 .1.3.6.1.4.1.18070.2.2.1.5.5.1.18 |
ipExtIntfGatewayThe gateway IP address associated with the interface.ro InetAddress .1.3.6.1.4.1.18070.2.2.1.5.5.1.19 |
ipExtIntfRowStatusThis columnar object is used for creating and deleting a
conceptual row of the ipExtIntf table.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.5.5.1.100 |
performance OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.6 |
oaCrntPMTableA table of current performance monitoring statistics collected
for the optical amplifier facilities on the NE. SEQUENCE OF OaCrntPMEntry .1.3.6.1.4.1.18070.2.2.1.6.1 |
oaCrntPMEntryThe row entry object of the optical amplifier current
performance monitoring table. Each row of this table contains
a full set of PM statistics and related data for a current
measurement interval for a given optical amplifier. OaCrntPMEntry .1.3.6.1.4.1.18070.2.2.1.6.1.1 |
oaCrntPMOaTypeIdxThe type of the optical amplifier targeted for PM retrieval. OaType .1.3.6.1.4.1.18070.2.2.1.6.1.1.1 |
oaCrntPMShelfIdxThe number of the shelf on which the amplifier targeted for
PMs is provisioned. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.1.1.2 |
oaCrntPMSlotIdxThe number of the slot within which the optical amplifier
targeted for PMs is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.1.1.3 |
oaCrntPMOaIdxThe number of the amplifier port on which the circuit pack for
PMs is targeted. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.1.1.4 |
oaCrntPMIntervalTypeIdxThe type of PM bin according to interval length. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.1.1.5 |
oaCrntPMCaseTempValueThe optical amplifier case temperature.ro INTEGER (-32768..32767) UNITS "degrees Celsius" .1.3.6.1.4.1.18070.2.2.1.6.1.1.6 |
oaCrntPMCaseTempTimeStampThe date and time stamp of the case temperature value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.1.1.7 |
oaCrntPMCaseTempValidityIndicates the validity of the provided case temperature
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.1.1.8 |
oaCrntPMLaser1TempValueThe optical amplifier laser 1 temperature.ro INTEGER (-32768..32767) UNITS "degrees Celsius" .1.3.6.1.4.1.18070.2.2.1.6.1.1.9 |
oaCrntPMLaser1TempTimeStampThe date and time stamp of the laser 1 temperature value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.1.1.10 |
oaCrntPMLaser1TempValidityIndicates the validity of the provided laser 1 temperature
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.1.1.11 |
oaCrntPMLaser2TempValueThe optical amplifier laser 2 temperature.ro INTEGER (-32768..32767) UNITS "degrees Celsius" .1.3.6.1.4.1.18070.2.2.1.6.1.1.12 |
oaCrntPMLaser2TempTimeStampThe date and time stamp of the laser 2 temperature value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.1.1.13 |
oaCrntPMLaser2TempValidityIndicates the validity of the provided laser 2 temperature
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.1.1.14 |
oaCrntPMOPRValueThe optical power received on the input of the amplifer.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.1.1.15 |
oaCrntPMOPRTimeStampThe date and time stamp of the optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.1.1.16 |
oaCrntPMOPRValidityIndicates the validity of the provided optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.1.1.17 |
oaCrntPMSSIOPRValueThe optical power received on the input of the second stage of
the amplifier.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.1.1.18 |
oaCrntPMSSIOPRTimeStampThe date and time stamp of the second stage input optical
power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.1.1.19 |
oaCrntPMSSIOPRValidityIndicates the validity of the provided second stage input
optical power received value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.1.1.20 |
oaCrntPMOPTValueThe optical power transmitted at the output of the amplifier.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.1.1.21 |
oaCrntPMOPTTimeStampThe date and time stamp of the optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.1.1.22 |
oaCrntPMOPTValidityIndicates the validity of the provided optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.1.1.23 |
oaCrntPMMSInsLossValueThe mid-stage insertion loss.ro FixedX10 UNITS "dB/10" .1.3.6.1.4.1.18070.2.2.1.6.1.1.24 |
oaCrntPMMSInsLossTimeStampThe date and time stamp of the mid-stage insertion loss
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.1.1.25 |
oaCrntPMMSInsLossValidityIndicates the validity of the provided mid-stage insertion
loss value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.1.1.26 |
oaCrntPMEffectiveGainValueThe effective gain of the optical amplifier. This reading is
compensated for amplified spontaneous emissions.ro FixedX10 UNITS "dB/10" .1.3.6.1.4.1.18070.2.2.1.6.1.1.27 |
oaCrntPMEffectiveGainTimeStampThe date and time stamp of the effective gain value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.1.1.28 |
oaCrntPMEffectiveGainValidityIndicates the validity of the provided effective gain value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.1.1.29 |
oaCrntPMFSOOPTValueThe optical power transmitted at the output of the first stage
of the amplifier.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.1.1.30 |
oaCrntPMFSOOPTTimeStampThe date and time stamp of the first stage output optical
power transmitted value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.1.1.31 |
oaCrntPMFSOOPTValidityIndicates the validity of the provided first stage output
optical power transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.1.1.32 |
oaCrntPMLaser1CurrentValueThe optical amplifier laser 1 current.ro FixedX10 UNITS "mAmp/10" .1.3.6.1.4.1.18070.2.2.1.6.1.1.33 |
oaCrntPMLaser1CurrentTimeStampThe date and time stamp of the laser 1 current value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.1.1.34 |
oaCrntPMLaser1CurrentValidityIndicates the validity of the provided laser 1 current value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.1.1.35 |
oaCrntPMLaser2CurrentValueThe optical amplifier laser 2 current.ro FixedX10 UNITS "mAmp/10" .1.3.6.1.4.1.18070.2.2.1.6.1.1.36 |
oaCrntPMLaser2CurrentTimeStampThe date and time stamp of the laser 2 current value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.1.1.37 |
oaCrntPMLaser2CurrentValidityIndicates the validity of the provided laser 2 current value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.1.1.38 |
oaCrntPMLaser1PowerValueThe optical amplifier laser 1 power.ro FixedX10 UNITS "mWatts/10" .1.3.6.1.4.1.18070.2.2.1.6.1.1.39 |
oaCrntPMLaser1PowerTimeStampThe date and time stamp of the laser 1 power value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.1.1.40 |
oaCrntPMLaser1PowerValidityIndicates the validity of the provided laser 1 power value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.1.1.41 |
oaCrntPMLaser2PowerValueThe optical amplifier laser 2 power.ro FixedX10 UNITS "mWatts/10" .1.3.6.1.4.1.18070.2.2.1.6.1.1.42 |
oaCrntPMLaser2PowerTimeStampThe date and time stamp of the laser 2 power value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.1.1.43 |
oaCrntPMLaser2PowerValidityIndicates the validity of the provided laser 2 power value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.1.1.44 |
oaCrntPMOBRValueThe back reflected optical power measured at the output of the
second stage of the optical amplifier.ro FixedX10 UNITS "dB/10" .1.3.6.1.4.1.18070.2.2.1.6.1.1.45 |
oaCrntPMOBRTimeStampThe date and time stamp of the optical back reflection value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.1.1.46 |
oaCrntPMOBRValidityIndicates the validity of the provided optical back reflection
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.1.1.47 |
oaCrntPMVOAValueThe variable optical attenuation of the amplifier.ro FixedX10 UNITS "dB/10" .1.3.6.1.4.1.18070.2.2.1.6.1.1.48 |
oaCrntPMVOATimeStampThe date and time stamp of the variable optical attenuation
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.1.1.49 |
oaCrntPMVOAValidityIndicates the validity of the provided variable optical
attenuation value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.1.1.50 |
oaHistPMTableA table of historical performance monitoring statistics
collected for the optical amplifier facilities on the NE. SEQUENCE OF OaHistPMEntry .1.3.6.1.4.1.18070.2.2.1.6.2 |
oaHistPMEntryThe row entry object of the optical amplifier historical
performance monitoring table. Each row of this table contains
a full set of PM statistics and related data for a historical
measurement interval for a given optical amplifier. OaHistPMEntry .1.3.6.1.4.1.18070.2.2.1.6.2.1 |
oaHistPMOaTypeIdxThe type of the optical amplifier targeted for PM retrieval. OaType .1.3.6.1.4.1.18070.2.2.1.6.2.1.1 |
oaHistPMShelfIdxThe number of the shelf on which the amplifier targeted for
PMs is provisioned. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.2.1.2 |
oaHistPMSlotIdxThe number of the slot within which the optical amplifier
targeted for PMs is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.2.1.3 |
oaHistPMOaIdxThe number of the amplifier port on the circuit pack targeted
for PMs. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.2.1.4 |
oaHistPMIntervalTypeIdxThe type of PM bin according to interval length. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.2.1.5 |
oaHistPMIntervalIdxThe specific PM bin number. The range is 1..96 for 15-minute
bins, and for 1-day historical bins, the value is 1. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.2.1.6 |
oaHistPMCaseTempValueThe optical amplifier case temperature.ro INTEGER (-32768..32767) UNITS "degrees Celsius" .1.3.6.1.4.1.18070.2.2.1.6.2.1.7 |
oaHistPMCaseTempTimeStampThe date and time stamp of the case temperature value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.2.1.8 |
oaHistPMCaseTempValidityIndicates the validity of the provided case temperature
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.2.1.9 |
oaHistPMLaser1TempValueThe optical amplifier laser 1 temperature.ro INTEGER (-32768..32767) UNITS "degrees Celsius" .1.3.6.1.4.1.18070.2.2.1.6.2.1.10 |
oaHistPMLaser1TempTimeStampThe date and time stamp of the laser 1 temperature value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.2.1.11 |
oaHistPMLaser1TempValidityIndicates the validity of the provided laser 1 temperature
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.2.1.12 |
oaHistPMLaser2TempValueThe optical amplifier laser 2 temperature.ro INTEGER (-32768..32767) UNITS "degrees Celsius" .1.3.6.1.4.1.18070.2.2.1.6.2.1.13 |
oaHistPMLaser2TempTimeStampThe date and time stamp of the laser 2 temperature value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.2.1.14 |
oaHistPMLaser2TempValidityIndicates the validity of the provided laser 2 temperature
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.2.1.15 |
oaHistPMOPRValueThe optical power received on the input of the amplifer.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.2.1.16 |
oaHistPMOPRTimeStampThe date and time stamp of the optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.2.1.17 |
oaHistPMOPRValidityIndicates the validity of the provided optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.2.1.18 |
oaHistPMSSIOPRValueThe optical power received on the input of the second stage of
the amplifier.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.2.1.19 |
oaHistPMSSIOPRTimeStampThe date and time stamp of the second stage input optical
power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.2.1.20 |
oaHistPMSSIOPRValidityIndicates the validity of the provided second stage input
optical power received value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.2.1.21 |
oaHistPMOPTValueThe optical power transmitted at the output of the amplifier.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.2.1.22 |
oaHistPMOPTTimeStampThe date and time stamp of the optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.2.1.23 |
oaHistPMOPTValidityIndicates the validity of the provided optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.2.1.24 |
oaHistPMMSInsLossValueThe mid-stage insertion loss.ro FixedX10 UNITS "dB/10" .1.3.6.1.4.1.18070.2.2.1.6.2.1.25 |
oaHistPMMSInsLossTimeStampThe date and time stamp of the mid-stage insertion loss
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.2.1.26 |
oaHistPMMSInsLossValidityIndicates the validity of the provided mid-stage insertion
loss value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.2.1.27 |
oaHistPMEffectiveGainValueThe effective gain of the optical amplifier. This reading is
compensated for amplified spontaneous emissions.ro FixedX10 UNITS "dB/10" .1.3.6.1.4.1.18070.2.2.1.6.2.1.28 |
oaHistPMEffectiveGainTimeStampThe date and time stamp of the effective gain value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.2.1.29 |
oaHistPMEffectiveGainValidityIndicates the validity of the provided effective gain value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.2.1.30 |
oaHistPMFSOOPTValueThe optical power transmitted at the output of the first stage
of the amplifier.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.2.1.31 |
oaHistPMFSOOPTTimeStampThe date and time stamp of the first stage output optical
power transmitted value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.2.1.32 |
oaHistPMFSOOPTValidityIndicates the validity of the provided first stage output
optical power transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.2.1.33 |
oaHistPMLaser1CurrentValueThe optical amplifier laser 1 current.ro FixedX10 UNITS "mAmp/10" .1.3.6.1.4.1.18070.2.2.1.6.2.1.34 |
oaHistPMLaser1CurrentTimeStampThe date and time stamp of the laser 1 current value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.2.1.35 |
oaHistPMLaser1CurrentValidityIndicates the validity of the provided laser 1 current value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.2.1.36 |
oaHistPMLaser2CurrentValueThe optical amplifier laser 2 current.ro FixedX10 UNITS "mAmp/10" .1.3.6.1.4.1.18070.2.2.1.6.2.1.37 |
oaHistPMLaser2CurrentTimeStampThe date and time stamp of the laser 2 current value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.2.1.38 |
oaHistPMLaser2CurrentValidityIndicates the validity of the provided laser 2 current value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.2.1.39 |
oaHistPMLaser1PowerValueThe optical amplifier laser 1 power.ro FixedX10 UNITS "mWatts/10" .1.3.6.1.4.1.18070.2.2.1.6.2.1.40 |
oaHistPMLaser1PowerTimeStampThe date and time stamp of the laser 1 power value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.2.1.41 |
oaHistPMLaser1PowerValidityIndicates the validity of the provided laser 1 power value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.2.1.42 |
oaHistPMLaser2PowerValueThe optical amplifier laser 2 power.ro FixedX10 UNITS "mWatts/10" .1.3.6.1.4.1.18070.2.2.1.6.2.1.43 |
oaHistPMLaser2PowerTimeStampThe date and time stamp of the laser 2 power value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.2.1.44 |
oaHistPMLaser2PowerValidityIndicates the validity of the provided laser 2 power value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.2.1.45 |
oaHistPMOBRValueThe back reflected optical power measured at the output of the
second stage of the optical amplifier.ro FixedX10 UNITS "dB/10" .1.3.6.1.4.1.18070.2.2.1.6.2.1.46 |
oaHistPMOBRTimeStampThe date and time stamp of the optical back reflection value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.2.1.47 |
oaHistPMOBRValidityIndicates the validity of the provided optical back reflection
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.2.1.48 |
oaHistPMVOAValueThe variable optical attenuation of the amplifier.ro FixedX10 UNITS "dB/10" .1.3.6.1.4.1.18070.2.2.1.6.2.1.49 |
oaHistPMVOATimeStampThe date and time stamp of the variable optical attenuation
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.2.1.50 |
oaHistPMVOAValidityIndicates the validity of the provided variable optical
attenuation value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.2.1.51 |
xcvrCrntPMTableA table of current performance monitoring statistics collected
for the optical transceiver facilities on the NE. SEQUENCE OF XcvrCrntPMEntry .1.3.6.1.4.1.18070.2.2.1.6.3 |
xcvrCrntPMEntryThe row entry object of the optical transceiver current
performance monitoring table. Each row of this table contains
a full set of PM statistics and related data for a current
measurement interval for a given optical transceiver. XcvrCrntPMEntry .1.3.6.1.4.1.18070.2.2.1.6.3.1 |
xcvrCrntPMTypeIdxThe type of the optical transceiver targeted for PMs. XcvrType .1.3.6.1.4.1.18070.2.2.1.6.3.1.1 |
xcvrCrntPMShelfIdxThe shelf number on which the optical transceiver targeted for
PMs is provisioned. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.3.1.2 |
xcvrCrntPMSlotIdxThe slot number on which the optical transceiver targeted for
PMs is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.3.1.3 |
xcvrCrntPMIdxThe optical transceiver port number on the circuit pack that
is targeted for PMs. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.3.1.4 |
xcvrCrntPMIntervalTypeIdxThe type of PM bin according to interval length. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.3.1.5 |
xcvrCrntPMOPRValueThe optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.3.1.6 |
xcvrCrntPMOPRTimeStampThe date and time stamp of the optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.7 |
xcvrCrntPMOPRValidityIndicates the validity of the provided optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.8 |
xcvrCrntPMOPTValueThe optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.3.1.9 |
xcvrCrntPMOPTTimeStampThe date and time stamp of the optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.10 |
xcvrCrntPMOPTValidityIndicates the validity of the provided optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.11 |
xcvrCrntPMTempValueThe optical transceiver temperature.ro INTEGER (-32768..32767) UNITS "degrees Celsius" .1.3.6.1.4.1.18070.2.2.1.6.3.1.12 |
xcvrCrntPMTempTimeStampThe date and time stamp of the temperature value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.13 |
xcvrCrntPMTempValidityIndicates the validity of the provided temperature value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.14 |
xcvrCrntPMSupplyVoltageValueThe transceiver supply voltage.ro FixedX10 UNITS "mVolts/10" .1.3.6.1.4.1.18070.2.2.1.6.3.1.15 |
xcvrCrntPMSupplyVoltageTimeStampThe date and time stamp of the supply voltage value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.16 |
xcvrCrntPMSupplyVoltageValidityIndicates the validity of the provided supply voltage value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.17 |
xcvrCrntPMLBCValueThe transceiver laser bias current.ro INTEGER (-32768..32767) UNITS "mAmp" .1.3.6.1.4.1.18070.2.2.1.6.3.1.18 |
xcvrCrntPMLBCTimeStampThe date and time stamp of the laser bias current value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.19 |
xcvrCrntPMLBCValidityIndicates the validity of the provided laser bias current
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.20 |
xcvrCrntPMCVSValueThe count of coding violations at the section layer. This
object applies only to transciever ports provisioned for a
SONET OC-N protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.21 |
xcvrCrntPMCVSTimeStampThe date and time stamp of the section layer coding violations
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.22 |
xcvrCrntPMCVSValidityIndicates the validity of the provided section layer coding
violations value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.23 |
xcvrCrntPMESSValueThe count of errored seconds at the section layer. This object
applies only to transciever ports provisioned for a SONET OC-N
protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.24 |
xcvrCrntPMESSTimeStampThe date and time stamp of the section layer errored seconds
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.25 |
xcvrCrntPMESSValidityIndicates the validity of the provided section layer errored
seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.26 |
xcvrCrntPMSESSValueThe count of severely errored seconds at the section layer.
This object applies only to transciever ports provisioned for
a SONET OC-N protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.27 |
xcvrCrntPMSESSTimeStampThe date and time stamp of the section layer severely errored
seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.28 |
xcvrCrntPMSESSValidityIndicates the validity of the provided section layer severely
errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.29 |
xcvrCrntPMSEFSSValueThe count of severely errored framing seconds at the section
layer. This object applies only to transciever ports
provisioned for a SONET OC-N protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.30 |
xcvrCrntPMSEFSSTimeStampThe date and time stamp of the section layer severely errored
framing seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.31 |
xcvrCrntPMSEFSSValidityIndicates the validity of the provided section layer severely
errored framing seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.32 |
xcvrCrntPMRSEBValueThe count of regenerator section errored blocks. This object
applies only to transciever ports provisioned for a SDH STM-N
protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.33 |
xcvrCrntPMRSEBTimeStampThe date and time stamp of the regenerator section errored
blocks value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.34 |
xcvrCrntPMRSEBValidityIndicates the validity of the provided regenerator section
errored blocks value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.35 |
xcvrCrntPMRSBBEValueThe count of regenerator section background block errors. This
object applies only to transciever ports provisioned for a SDH
STM-N protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.36 |
xcvrCrntPMRSBBETimeStampThe date and time stamp of the regenerator section background
block errors value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.37 |
xcvrCrntPMRSBBEValidityIndicates the validity of the provided regenerator section
background block errors value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.38 |
xcvrCrntPMRSESValueThe count of regenerator section errored seconds. This object
applies only to transciever ports provisioned for a SDH STM-N
protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.39 |
xcvrCrntPMRSESTimeStampThe date and time stamp of the regenerator section errored
seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.40 |
xcvrCrntPMRSESValidityIndicates the validity of the provided regenerator section
errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.41 |
xcvrCrntPMRSSESValueThe count of regenerator section severely errored seconds.
This object applies only to transciever ports provisioned for
a SDH STM-N protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.42 |
xcvrCrntPMRSSESTimeStampThe date and time stamp of the regenerator section severely
errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.43 |
xcvrCrntPMRSSESValidityIndicates the validity of the provided regenerator section
severely errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.44 |
xcvrCrntPMRSOFSValueThe count of regenerator section out-of-frame seconds. This
object applies only to transciever ports provisioned for a SDH
STM-N protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.45 |
xcvrCrntPMRSOFSTimeStampThe date and time stamp of the regenerator section
out-of-frame seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.46 |
xcvrCrntPMRSOFSValidityIndicates the validity of the provided regenerator section
out-of-frame seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.47 |
xcvrCrntPMCVValueThe count of coding violations. This object applies only to
transciever ports provisioned for the gigabit ethernet
protocol or a fiber channel protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.48 |
xcvrCrntPMCVTimeStampThe date and time stamp of the coding violations value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.49 |
xcvrCrntPMCVValidityIndicates the validity of the provided coding violations
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.50 |
xcvrCrntPMESValueThe count of errored seconds. This object applies only to
transciever ports provisioned for an ethernet protocol
or a fiber channel protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.51 |
xcvrCrntPMESTimeStampThe date and time stamp of the errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.52 |
xcvrCrntPMESValidityIndicates the validity of the provided errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.53 |
xcvrCrntPMSESValueThe count of severely errored seconds. This object applies
only to transciever ports provisioned for an ethernet
protocol or a fiber channel protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.54 |
xcvrCrntPMSESTimeStampThe date and time stamp of the severely errored seconds
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.55 |
xcvrCrntPMSESValidityIndicates the validity of the provided severely errored
seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.56 |
xcvrCrntPMINVBLKValueThe count of invalid blocks. This object applies only to
transciever ports provisioned for the 10 gigabit ethernet LAN
protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.57 |
xcvrCrntPMINVBLKTimeStampThe date and time stamp of the invalid blocks value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.58 |
xcvrCrntPMINVBLKValidityIndicates the validity of the provided invalid blocks value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.59 |
xcvrCrntPMNBITCRValueThe count of the number of bits corrected. This object
applies only to transciever ports provisioned for a protocol
that includes Forward Error Correction (FEC).rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.60 |
xcvrCrntPMNBITCRTimeStampThe date and time stamp of the number of bits corrected
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.61 |
xcvrCrntPMNBITCRValidityIndicates the validity of the provided number of bits
corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.62 |
xcvrCrntPMNBYTCRValueThe count of the number of bytes corrected. This object
applies only to transciever ports provisioned for a protocol
that includes Forward Error Correction (FEC).rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.63 |
xcvrCrntPMNBYTCRTimeStampThe date and time stamp of the number of bytes corrected
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.64 |
xcvrCrntPMNBYTCRValidityIndicates the validity of the provided number of bytes
corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.65 |
xcvrCrntPMUNCRCDWValueThe count of uncorrectable codewords. This object
applies only to transciever ports provisioned for a protocol
that includes Forward Error Correction (FEC).rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.66 |
xcvrCrntPMUNCRCDWTimeStampThe date and time stamp of the uncorrectable codewords value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.67 |
xcvrCrntPMUNCRCDWValidityIndicates the validity of the provided uncorrectable codewords
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.68 |
xcvrCrntPMTBYCRXValueThe total number of bytes of data (including those in bad
frames) received (excluding framing bits but including FCS
octets). This object applies only to transceiver ports
provisioned for the 10 gigabit ethernet LAN protocol.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.3.1.69 |
xcvrCrntPMTBYCRXTimeStampThe date and time stamp of the received bytes count value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.70 |
xcvrCrntPMTBYCRXValidityIndicates the validity of the provided received bytes count
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.71 |
xcvrCrntPMTBYCRXInitializeUsed to initialize the value of the xcvrCrntPMTBYCRXValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.72 |
xcvrCrntPMTFRCRXValueThe total number of received frames (incl. bad frames,
broadcast frames, and multicast frames received). This object
applies only to transceiver ports provisioned for the 10
gigabit ethernet LAN protocol.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.3.1.73 |
xcvrCrntPMTFRCRXTimeStampThe date and time stamp of the total received frames count
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.74 |
xcvrCrntPMTFRCRXValidityIndicates the validity of the provided received frames count
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.75 |
xcvrCrntPMTFRCRXInitializeUsed to initialize the value of the xcvrCrntPMTFRCRXValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.76 |
xcvrCrntPMBCSTValueThe total number of good frames received that were directed to
the broadcast address. Note that this does not include
multicast frames. This object applies only to transceiver
ports provisioned for the 10 gigabit ethernet LAN protocol.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.3.1.77 |
xcvrCrntPMBCSTTimeStampThe date and time stamp of the broadcast packets received
count value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.78 |
xcvrCrntPMBCSTValidityIndicates the validity of the provided broadcast packets
received count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.79 |
xcvrCrntPMBCSTInitializeUsed to initialize the value of the xcvrCrntPMBCSTValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.80 |
xcvrCrntPMMCSTValueThe total number of good frames received that were directed to
a multicast address. Note that this number does not include
frames directed to the broadcast address. This object applies
only to transceiver ports provisioned for the 10 gigabit
ethernet LAN protocol.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.3.1.81 |
xcvrCrntPMMCSTTimeStampThe date and time stamp of the multicast packets received
count value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.82 |
xcvrCrntPMMCSTValidityIndicates the validity of the provided multicast packets
received count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.83 |
xcvrCrntPMMCSTInitializeUsed to initialize the value of the xcvrCrntPMMCSTValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.84 |
xcvrCrntPMSIZE64ValueThe total number of 64 byte frames received (excluding framing
bits but including FCS octets). This object applies only to
transceiver ports provisioned for the 10 gigabit ethernet LAN
protocol.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.3.1.85 |
xcvrCrntPMSIZE64TimeStampThe date and time stamp of the count of 64-byte packets
received.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.86 |
xcvrCrntPMSIZE64ValidityIndicates the validity of the provided count of 64-byte
packets packets received.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.87 |
xcvrCrntPMSIZE64InitializeUsed to initialize the value of the xcvrCrntPMSIZE64Value
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.88 |
xcvrCrntPMSIZE65To127ValueThe total number of frames received that are 65 to 127 bytes
inclusive in length (excluding framing bits but including FCS
octets). This object applies only to transceiver ports
provisioned for the 10 gigabit ethernet LAN protocol.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.3.1.89 |
xcvrCrntPMSIZE65To127TimeStampThe date and time stamp of the count of packets between 65 and
127 bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.90 |
xcvrCrntPMSIZE65To127ValidityIndicates the validity of the provided count of packets
between 65 and 127 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.91 |
xcvrCrntPMSIZE65To127InitializeUsed to initialize the value of the xcvrCrntPMSIZE65To127Value
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.92 |
xcvrCrntPMSIZE128To255ValueThe total number of frames received that are 128 to 255 bytes
inclusive in length (excluding framing bits but including FCS
octets). This object applies only to transceiver ports
provisioned for the 10 gigabit ethernet LAN protocol.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.3.1.93 |
xcvrCrntPMSIZE128To255TimeStampThe date and time stamp of the count of packets between 128
and 255 bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.94 |
xcvrCrntPMSIZE128To255ValidityIndicates the validity of the provided count of packets
between 128 and 255 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.95 |
xcvrCrntPMSIZE128To255InitializeUsed to initialize the value of the
xcvrCrntPMSIZE128To255Value object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.96 |
xcvrCrntPMSIZE256To511ValueThe total number of frames received that are 256 to 511 bytes
inclusive in length (excluding framing bits but including FCS
octets). This object applies only to transceiver ports
provisioned for the 10 gigabit ethernet LAN protocol.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.3.1.97 |
xcvrCrntPMSIZE256To511TimeStampThe date and time stamp of the count of packets between 256
and 511 bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.98 |
xcvrCrntPMSIZE256To511ValidityIndicates the validity of the provided count of packets
between 256 and 511 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.99 |
xcvrCrntPMSIZE256To511InitializeUsed to initialize the value of the
xcvrCrntPMSIZE256To511Value object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.100 |
xcvrCrntPMSIZE512To1023ValueThe total number of frames received that are 512 to 1023 bytes
inclusive in length (excluding framing bits but including FCS
octets). This object applies only to transceiver ports
provisioned for the 10 gigabit ethernet LAN protocol.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.3.1.101 |
xcvrCrntPMSIZE512To1023TimeStampThe date and time stamp of the count of packets between 512
and 1023 bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.102 |
xcvrCrntPMSIZE512To1023ValidityIndicates the validity of the provided count of packets
between 512 and 1023 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.103 |
xcvrCrntPMSIZE512To1023InitializeUsed to initialize the value of the
xcvrCrntPMSIZE512To1023Value object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.104 |
xcvrCrntPMSIZE1024To1518ValueThe total number of frames received that are 1024 to 1518
bytes inclusive in length (excluding framing bits but
including FCS octets). This object applies only to transceiver
ports provisioned for the 10 gigabit ethernet LAN protocol.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.3.1.105 |
xcvrCrntPMSIZE1024To1518TimeStampThe date and time stamp of the count of packets between 1024
and 1518 bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.106 |
xcvrCrntPMSIZE1024To1518ValidityIndicates the validity of the provided count of packets
between 1024 and 1518 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.107 |
xcvrCrntPMSIZE1024To1518InitializeUsed to initialize the value of the
xcvrCrntPMSIZE1024To1518Value object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.108 |
xcvrCrntPMSIZEOver1518ValueThe total number of frames received that are greater than or
equal to 1519 bytes in length (excluding framing bits but
including FCS octets). This object applies only to transceiver
ports provisioned for the 10 gigabit ethernet LAN protocol.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.3.1.109 |
xcvrCrntPMSIZEOver1518TimeStampThe date and time stamp of the count of packets over 1518
bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.110 |
xcvrCrntPMSIZEOver1518ValidityIndicates the validity of the provided count of packets over
1518 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.111 |
xcvrCrntPMSIZEOver1518InitializeUsed to initialize the value of the
xcvrCrntPMSIZEOver1518Value object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.112 |
xcvrCrntPMFCSEValueThe count of packets that had a valid length but had either a
Frame Check Sequence (FCS) or a bad FCS with a non-integral
number of octets (Alignment Error) . This object applies only
to transceiver ports provisioned for the 10 gigabit ethernet
LAN protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.113 |
xcvrCrntPMFCSETimeStampThe date and time stamp of the count of packets with bad FCS
or alignment error.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.114 |
xcvrCrntPMFCSEValidityIndicates the validity of the provided count of packets with
bad FCS or alignment error.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.115 |
xcvrCrntPMFRDRValueThe total number of dropped frames due to lack of resources or
otherwise. Note that this number is not necessarily the number
of frames dropped; it is just the number of times that it
could be detected. This object applies only to transceiver
ports provisioned for the 10 gigabit ethernet LAN protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.116 |
xcvrCrntPMFRDRTimeStampThe date and time stamp of the count of dropped packets.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.117 |
xcvrCrntPMFRDRValidityIndicates the validity of the provided count of dropped
packets.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.118 |
xcvrCrntPMUSIZEValueThe total number of frames received that were less than 64
octets long (excluding framing bits, but including FCS octets)
and were otherwise well formed. This object applies only to
transceiver ports provisioned for the 10 gigabit ethernet LAN
protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.119 |
xcvrCrntPMUSIZETimeStampThe date and time stamp of the count of undersized packets.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.120 |
xcvrCrntPMUSIZEValidityIndicates the validity of the provided count of undersized
packets.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.121 |
xcvrCrntPMOSIZEValueThe total number of frames received that were longer than 9600
octets (excluding framing bits, but including FCS octets) and
were otherwise well formed. This object applies only to
transceiver ports provisioned for the 10 gigabit ethernet LAN
protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.122 |
xcvrCrntPMOSIZETimeStampThe date and time stamp of the count of oversized packets.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.123 |
xcvrCrntPMOSIZEValidityIndicates the validity of the provided count of oversized
packets.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.124 |
xcvrCrntPMFRGTValueThe total number of frames received that were less than 64
octets in length (excluding framing bits but including FCS
octets) and had either a bad Frame Check Sequence (FCS) with
an integral number of octets (FCS Error) or a bad FCS with a
non-integral number of octets (Alignment Error). This object
applies only to transceiver ports provisioned for the 10
gigabit ethernet LAN protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.125 |
xcvrCrntPMFRGTTimeStampThe date and time stamp of the count of received packet
fragments.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.126 |
xcvrCrntPMFRGTValidityIndicates the validity of the provided count of received
packet fragments.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.127 |
xcvrCrntPMJABRValueThe total number of frames received that were longer than
14336 9600 octets (excluding framing bits, but including FCS
octets), and had either a bad Frame Check Sequence (FCS) with
an integral number of octets (FCS Error) or a bad FCS with
non-integral number of octets (Alignment Error). This object
applies only to transceiver ports provisioned for the 10
gigabit ethernet LAN protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.128 |
xcvrCrntPMJABRTimeStampThe date and time stamp of the count of received jabbers.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.129 |
xcvrCrntPMJABRValidityIndicates the validity of the provided count of received
jabbers.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.130 |
xcvrCrntPMOTUEBValueThe count of OTN digital wrapper layer errored blocks.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.131 |
xcvrCrntPMOTUEBTimeStampThe date and time stamp of the OTN digital wrapper layer
errored blocks value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.132 |
xcvrCrntPMOTUEBValidityIndicates the validity of the provided OTN digital wrapper
layer errored blocks value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.133 |
xcvrCrntPMOTUBBEValueThe count of OTN digital wrapper layer background block
errors.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.134 |
xcvrCrntPMOTUBBETimeStampThe date and time stamp of the OTN digital wrapper layer
background block errors.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.135 |
xcvrCrntPMOTUBBEValidityIndicates the validity of the provided OTN digital wrapper
layer background block errors value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.136 |
xcvrCrntPMOTUESValueThe count of errored seconds at the OTN digital wrapper
layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.137 |
xcvrCrntPMOTUESTimeStampThe date and time stamp of the OTN digital wrapper layer
errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.138 |
xcvrCrntPMOTUESValidityIndicates the validity of the provided OTN digital wrapper
layer errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.139 |
xcvrCrntPMOTUSESValueThe count of severely errored seconds at the OTN digital
wrapper layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.140 |
xcvrCrntPMOTUSESTimeStampThe date and time stamp of the OTN digital wrapper layer
severely errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.141 |
xcvrCrntPMOTUSESValidityIndicates the validity of the provided OTN digital wrapper
layer severely errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.142 |
xcvrCrntPMOTUOFSValueThe count of Out-Of-Frame seconds at the OTN digital wrapper
layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.143 |
xcvrCrntPMOTUOFSTimeStampThe date and time stamp of the OTN digital wrapper layer
Out-Of-Frame seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.144 |
xcvrCrntPMOTUOFSValidityIndicates the validity of the provided OTN digital wrapper
layer Out-of-Frame seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.145 |
xcvrCrntPMSupplyVoltage2ValueA second supply voltage value on the transceiver.ro FixedX10 UNITS "mVolts/10" .1.3.6.1.4.1.18070.2.2.1.6.3.1.146 |
xcvrCrntPMSupplyVoltage2TimeStampThe date and time stamp of the second supply voltage value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.147 |
xcvrCrntPMSupplyVoltage2ValidityIndicates the validity of the provided second supply voltage
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.148 |
xcvrCrntPMCVSInitializeUsed to initialize the value of the xcvrCrntPMCVSValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.149 |
xcvrCrntPMESSInitializeUsed to initialize the value of the xcvrCrntPMESSValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.150 |
xcvrCrntPMSESSInitializeUsed to initialize the value of the xcvrCrntPMSESSValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.151 |
xcvrCrntPMSEFSSInitializeUsed to initialize the value of the xcvrCrntPMSEFSSValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.152 |
xcvrCrntPMRSEBInitializeUsed to initialize the value of the xcvrCrntPMRSEBValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.153 |
xcvrCrntPMRSBBEInitializeUsed to initialize the value of the xcvrCrntPMRSBBEValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.154 |
xcvrCrntPMRSESInitializeUsed to initialize the value of the xcvrCrntPMRSESValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.155 |
xcvrCrntPMRSSESInitializeUsed to initialize the value of the xcvrCrntPMRSSESValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.156 |
xcvrCrntPMRSOFSInitializeUsed to initialize the value of the xcvrCrntPMRSOFSValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.157 |
xcvrCrntPMCVInitializeUsed to initialize the value of the xcvrCrntPMCVValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.158 |
xcvrCrntPMESInitializeUsed to initialize the value of the xcvrCrntPMESValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.159 |
xcvrCrntPMSESInitializeUsed to initialize the value of the xcvrCrntPMSESValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.160 |
xcvrCrntPMINVBLKInitializeUsed to initialize the value of the xcvrCrntPMINVBLKValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.161 |
xcvrCrntPMNBITCRInitializeUsed to initialize the value of the xcvrCrntPMNBITCRValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.162 |
xcvrCrntPMNBYTCRInitializeUsed to initialize the value of the xcvrCrntPMNBYTCRValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.163 |
xcvrCrntPMUNCRCDWInitializeUsed to initialize the value of the xcvrCrntPMUNCRCDWValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.164 |
xcvrCrntPMFCSEInitializeUsed to initialize the value of the xcvrCrntPMFCSEValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.165 |
xcvrCrntPMFRDRInitializeUsed to initialize the value of the xcvrCrntPMFRDRValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.166 |
xcvrCrntPMUSIZEInitializeUsed to initialize the value of the xcvrCrntPMUSIZEValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.167 |
xcvrCrntPMOSIZEInitializeUsed to initialize the value of the xcvrCrntPMOSIZEValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.168 |
xcvrCrntPMFRGTInitializeUsed to initialize the value of the xcvrCrntPMFRGTValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.169 |
xcvrCrntPMJABRInitializeUsed to initialize the value of the xcvrCrntPMJABRValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.170 |
xcvrCrntPMOTUEBInitializeUsed to initialize the value of the xcvrCrntPMOTUEBValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.171 |
xcvrCrntPMOTUBBEInitializeUsed to initialize the value of the xcvrCrntPMOTUBBEValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.172 |
xcvrCrntPMOTUESInitializeUsed to initialize the value of the xcvrCrntPMOTUESValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.173 |
xcvrCrntPMOTUSESInitializeUsed to initialize the value of the xcvrCrntPMOTUSESValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.174 |
xcvrCrntPMOTUOFSInitializeUsed to initialize the value of the xcvrCrntPMOTUOFSValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.175 |
xcvrCrntPMUASSValueThe count of unavailable seconds at the section layer.
This object applies only to transciever ports provisioned for
a SONET OC-N protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.176 |
xcvrCrntPMUASSTimeStampThe date and time stamp of the section layer unavailable
seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.177 |
xcvrCrntPMUASSValidityIndicates the validity of the provided section layer
unavailable seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.178 |
xcvrCrntPMUASSInitializeUsed to initialize the value of the xcvrCrntPMUASSValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.179 |
xcvrCrntPMRSUASValueThe count of regenerator section unavailable seconds.
This object applies only to transciever ports provisioned for
a SDH STM-N protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.180 |
xcvrCrntPMRSUASTimeStampThe date and time stamp of the regenerator section
unavailable seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.181 |
xcvrCrntPMRSUASValidityIndicates the validity of the provided regenerator section
unavailable seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.182 |
xcvrCrntPMRSUASInitializeUsed to initialize the value of the xcvrCrntPMRSUASValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.183 |
xcvrCrntPMUASValueThe count of unavailable seconds. This object applies
only to transciever ports provisioned for the gigabit ethernet
protocol or a fiber channel protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.184 |
xcvrCrntPMUASTimeStampThe date and time stamp of the unavailable seconds
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.185 |
xcvrCrntPMUASValidityIndicates the validity of the provided unavailable
seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.186 |
xcvrCrntPMUASInitializeUsed to initialize the value of the xcvrCrntPMUASValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.187 |
xcvrCrntPMOTUUASValueThe count of unavailable seconds at the OTN digital
wrapper layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.3.1.188 |
xcvrCrntPMOTUUASTimeStampThe date and time stamp of the OTN digital wrapper layer
unavailable seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.189 |
xcvrCrntPMOTUUASValidityIndicates the validity of the provided OTN digital wrapper
layer unavailable seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.190 |
xcvrCrntPMOTUUASInitializeUsed to initialize the value of the xcvrCrntPMOTUUASValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.191 |
xcvrCrntPMOTNBERValueThe instantaneous BER of transciever ports provisioned for the 10 gigabit
ethernet LAN with FEC protocol.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.192 |
xcvrCrntPMOTNBERTimeStampThe date and time stamp of the instantaneous BER.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.193 |
xcvrCrntPMOTNBERValidityIndicates the validity of the provided instantaneous BER.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.194 |
xcvrCrntPMOTNBERInitializeUsed to initialize the value of the xcvrCrntPMOTNBERValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.195 |
xcvrCrntPMOTNAVGBERValueThe average/interval BER of transciever ports provisioned for the 10 gigabit
ethernet LAN with FEC protocol.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.196 |
xcvrCrntPMOTNAVGBERTimeStampThe date and time stamp of the average/interval BER.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.197 |
xcvrCrntPMOTNAVGBERValidityIndicates the validity of the provided average/interval BER.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.198 |
xcvrCrntPMOTNAVGBERInitializeUsed to initialize the value of the xcvrCrntPMOTNAVGBERValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.199 |
xcvrCrntPMNBITCR64BitValueThe 64-bit count of the number of bits corrected. This object
applies only to transciever ports provisioned for a protocol
that includes Forward Error Correction (FEC).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.3.1.200 |
xcvrCrntPMNBITCR64BitTimeStampThe date and time stamp of the 64-bit number of bits
corrected value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.201 |
xcvrCrntPMNBITCR64BitValidityIndicates the validity of the provided 64-bit number
of bits corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.202 |
xcvrCrntPMNBITCR64BitInitializeUsed to initialize the value of the xcvrCrntPMNBITCR64BitValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.203 |
xcvrCrntPMNBYTCR64BitValueThe 64-bit count of the number of bytes corrected. This object
applies only to transciever ports provisioned for a protocol
that includes Forward Error Correction (FEC).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.3.1.204 |
xcvrCrntPMNBYTCR64BitTimeStampThe date and time stamp of the 64-bit number of bytes
corrected value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.205 |
xcvrCrntPMNBYTCR64BitValidityIndicates the validity of the provided 64-bit number of
bytes corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.206 |
xcvrCrntPMNBYTCR64BitInitializeUsed to initialize the value of the xcvrCrntPMNBYTCR64BitValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.207 |
xcvrCrntPMOPRMinValueThe minimum optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.3.1.208 |
xcvrCrntPMOPRMinTimeStampThe date and time stamp of the minimum optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.209 |
xcvrCrntPMOPRMinValidityIndicates the validity of the provided minimum optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.210 |
xcvrCrntPMOPRMinInitializeUsed to initialize the value of the xcvrCrntPMOPRMinValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.211 |
xcvrCrntPMOPRMaxValueThe maximum optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.3.1.212 |
xcvrCrntPMOPRMaxTimeStampThe date and time stamp of the maximum optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.213 |
xcvrCrntPMOPRMaxValidityIndicates the validity of the provided maximum optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.214 |
xcvrCrntPMOPRMaxInitializeUsed to initialize the value of the xcvrCrntPMOPRMaxValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.215 |
xcvrCrntPMOPRAvgValueThe average optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.3.1.216 |
xcvrCrntPMOPRAvgTimeStampThe date and time stamp of the average optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.217 |
xcvrCrntPMOPRAvgValidityIndicates the validity of the provided average optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.218 |
xcvrCrntPMOPRAvgInitializeUsed to initialize the value of the xcvrCrntPMOPRAvgValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.219 |
xcvrCrntPMOPTMinValueThe minimum optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.3.1.220 |
xcvrCrntPMOPTMinTimeStampThe date and time stamp of the minimum optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.221 |
xcvrCrntPMOPTMinValidityIndicates the validity of the provided minimum optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.222 |
xcvrCrntPMOPTMinInitializeUsed to initialize the value of the xcvrCrntPMOPTMinValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.223 |
xcvrCrntPMOPTMaxValueThe maximum optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.3.1.224 |
xcvrCrntPMOPTMaxTimeStampThe date and time stamp of the maximum optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.225 |
xcvrCrntPMOPTMaxValidityIndicates the validity of the provided maximum optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.226 |
xcvrCrntPMOPTMaxInitializeUsed to initialize the value of the xcvrCrntPMOPTMaxValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.227 |
xcvrCrntPMOPTAvgValueThe average optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.3.1.228 |
xcvrCrntPMOPTAvgTimeStampThe date and time stamp of the average optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.3.1.229 |
xcvrCrntPMOPTAvgValidityIndicates the validity of the provided average optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.3.1.230 |
xcvrCrntPMOPTAvgInitializeUsed to initialize the value of the xcvrCrntPMOPTAvgValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.3.1.231 |
xcvrHistPMTableA table of historical performance monitoring statistics
collected for the optical transceiver facilities on the NE. SEQUENCE OF XcvrHistPMEntry .1.3.6.1.4.1.18070.2.2.1.6.4 |
xcvrHistPMEntryThe row entry object of the optical transceiver historical
performance monitoring table. Each row of this table contains
a full set of PM statistics and related data for a historical
measurement interval for a given optical transceiver. XcvrHistPMEntry .1.3.6.1.4.1.18070.2.2.1.6.4.1 |
xcvrHistPMTypeIdxThe type of the optical transceiver targeted for PMs. XcvrType .1.3.6.1.4.1.18070.2.2.1.6.4.1.1 |
xcvrHistPMShelfIdxThe number of the shelf on which the optical transceiver
targeted for PMs is provisioned. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.4.1.2 |
xcvrHistPMSlotIdxThe number of the slot within which the optical transceiver
targeted for PMs is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.4.1.3 |
xcvrHistPMIdxThe number of the transceiver port targeted for PMs. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.4.1.4 |
xcvrHistPMIntervalTypeIdxThe type of PM bin according to interval length. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.4.1.5 |
xcvrHistPMIntervalIdxThe specific PM bin number. The range is 1 to 96 for the
15-minute historical bins. For the 1-day historical bin, the
value is 1. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.4.1.6 |
xcvrHistPMOPRValueThe optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.4.1.7 |
xcvrHistPMOPRTimeStampThe date and time stamp of the optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.8 |
xcvrHistPMOPRValidityIndicates the validity of the provided optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.9 |
xcvrHistPMOPTValueThe optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.4.1.10 |
xcvrHistPMOPTTimeStampThe date and time stamp of the optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.11 |
xcvrHistPMOPTValidityIndicates the validity of the provided optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.12 |
xcvrHistPMTempValueThe optical transceiver temperature.ro INTEGER (-32768..32767) UNITS "degrees Celsius" .1.3.6.1.4.1.18070.2.2.1.6.4.1.13 |
xcvrHistPMTempTimeStampThe date and time stamp of the temperature value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.14 |
xcvrHistPMTempValidityIndicates the validity of the provided temperature value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.15 |
xcvrHistPMSupplyVoltageValueThe transceiver supply voltage.ro FixedX10 UNITS "mVolts/10" .1.3.6.1.4.1.18070.2.2.1.6.4.1.16 |
xcvrHistPMSupplyVoltageTimeStampThe date and time stamp of the supply voltage value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.17 |
xcvrHistPMSupplyVoltageValidityIndicates the validity of the provided supply voltage value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.18 |
xcvrHistPMLBCValueThe transceiver laser bias current.ro INTEGER (-32768..32767) UNITS "mAmp" .1.3.6.1.4.1.18070.2.2.1.6.4.1.19 |
xcvrHistPMLBCTimeStampThe date and time stamp of the laser bias current value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.20 |
xcvrHistPMLBCValidityIndicates the validity of the provided laser bias current
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.21 |
xcvrHistPMCVSValueThe count of coding violations at the section layer. This
object applies only to transciever ports provisioned for a
SONET OC-N protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.22 |
xcvrHistPMCVSTimeStampThe date and time stamp of the section layer coding violations
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.23 |
xcvrHistPMCVSValidityIndicates the validity of the provided section layer coding
violations value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.24 |
xcvrHistPMESSValueThe count of errored seconds at the section layer. This object
applies only to transciever ports provisioned for a SONET OC-N
protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.25 |
xcvrHistPMESSTimeStampThe date and time stamp of the section layer errored seconds
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.26 |
xcvrHistPMESSValidityIndicates the validity of the provided section layer errored
seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.27 |
xcvrHistPMSESSValueThe count of severely errored seconds at the section layer.
This object applies only to transciever ports provisioned for
a SONET OC-N protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.28 |
xcvrHistPMSESSTimeStampThe date and time stamp of the section layer severely errored
seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.29 |
xcvrHistPMSESSValidityIndicates the validity of the provided section layer severely
errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.30 |
xcvrHistPMSEFSSValueThe count of severely errored framing seconds at the section
layer. This object applies only to transciever ports
provisioned for a SONET OC-N protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.31 |
xcvrHistPMSEFSSTimeStampThe date and time stamp of the section layer severely errored
framing seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.32 |
xcvrHistPMSEFSSValidityIndicates the validity of the provided section layer severely
errored framing seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.33 |
xcvrHistPMRSEBValueThe count of regenerator section errored blocks. This object
applies only to transciever ports provisioned for a SDH STM-N
protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.34 |
xcvrHistPMRSEBTimeStampThe date and time stamp of the regenerator section errored
blocks value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.35 |
xcvrHistPMRSEBValidityIndicates the validity of the provided regenerator section
errored blocks value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.36 |
xcvrHistPMRSBBEValueThe count of regenerator section background block errors. This
object applies only to transciever ports provisioned for a SDH
STM-N protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.37 |
xcvrHistPMRSBBETimeStampThe date and time stamp of the regenerator section background
block errors value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.38 |
xcvrHistPMRSBBEValidityIndicates the validity of the provided regenerator section
background block errors value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.39 |
xcvrHistPMRSESValueThe count of regenerator section errored seconds. This object
applies only to transciever ports provisioned for a SDH STM-N
protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.40 |
xcvrHistPMRSESTimeStampThe date and time stamp of the regenerator section errored
seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.41 |
xcvrHistPMRSESValidityIndicates the validity of the provided regenerator section
errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.42 |
xcvrHistPMRSSESValueThe count of regenerator section severely errored seconds.
This object applies only to transciever ports provisioned for
a SDH STM-N protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.43 |
xcvrHistPMRSSESTimeStampThe date and time stamp of the regenerator section severely
errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.44 |
xcvrHistPMRSSESValidityIndicates the validity of the provided regenerator section
severely errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.45 |
xcvrHistPMRSOFSValueThe count of regenerator section out-of-frame seconds. This
object applies only to transciever ports provisioned for a SDH
STM-N protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.46 |
xcvrHistPMRSOFSTimeStampThe date and time stamp of the regenerator section
out-of-frame seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.47 |
xcvrHistPMRSOFSValidityIndicates the validity of the provided regenerator section
out-of-frame seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.48 |
xcvrHistPMCVValueThe count of coding violations. This object applies only to
transciever ports provisioned for the gigabit ethernet
protocol or a fiber channel protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.49 |
xcvrHistPMCVTimeStampThe date and time stamp of the coding violations value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.50 |
xcvrHistPMCVValidityIndicates the validity of the provided coding violations
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.51 |
xcvrHistPMESValueThe count of errored seconds. This object applies only to
transciever ports provisioned for an ethernet protocol
or a fiber channel protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.52 |
xcvrHistPMESTimeStampThe date and time stamp of the errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.53 |
xcvrHistPMESValidityIndicates the validity of the provided errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.54 |
xcvrHistPMSESValueThe count of severely errored seconds. This object applies
only to transciever ports provisioned for an ethernet
protocol or a fiber channel protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.55 |
xcvrHistPMSESTimeStampThe date and time stamp of the severely errored seconds
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.56 |
xcvrHistPMSESValidityIndicates the validity of the provided severely errored
seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.57 |
xcvrHistPMINVBLKValueThe count of invalid blocks. This object applies only to
transciever ports provisioned for the 10 gigabit ethernet LAN
protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.58 |
xcvrHistPMINVBLKTimeStampThe date and time stamp of the invalid blocks value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.59 |
xcvrHistPMINVBLKValidityIndicates the validity of the provided invalid blocks value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.60 |
xcvrHistPMNBITCRValueThe count of the number of bits corrected. This object
applies only to transciever ports provisioned for a protocol
that includes Forward Error Correction (FEC).rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.61 |
xcvrHistPMNBITCRTimeStampThe date and time stamp of the number of bits corrected
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.62 |
xcvrHistPMNBITCRValidityIndicates the validity of the provided number of bits
corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.63 |
xcvrHistPMNBYTCRValueThe count of the number of bytes corrected. This object
applies only to transciever ports provisioned for a protocol
that includes Forward Error Correction (FEC).rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.64 |
xcvrHistPMNBYTCRTimeStampThe date and time stamp of the number of bytes corrected
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.65 |
xcvrHistPMNBYTCRValidityIndicates the validity of the provided number of bytes
corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.66 |
xcvrHistPMUNCRCDWValueThe count of uncorrectable codewords. This object
applies only to transciever ports provisioned for a protocol
that includes Forward Error Correction (FEC).rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.67 |
xcvrHistPMUNCRCDWTimeStampThe date and time stamp of the uncorrectable codewords value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.68 |
xcvrHistPMUNCRCDWValidityIndicates the validity of the provided uncorrectable codewords
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.69 |
xcvrHistPMTBYCRXValueThe total number of bytes of data (including those in bad
frames) received (excluding framing bits but including FCS
bytes). This object applies only to transceiver ports
provisioned for the 10 gigabit ethernet LAN protocol.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.4.1.70 |
xcvrHistPMTBYCRXTimeStampThe date and time stamp of the received bytes count value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.71 |
xcvrHistPMTBYCRXValidityIndicates the validity of the provided received bytes count
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.72 |
xcvrHistPMTBYCRXInitializeUsed to initialize the value of the xcvrHistPMTBYCRXValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.73 |
xcvrHistPMTFRCRXValueThe total number of received frames (incl. bad frames,
broadcast frames, and multicast frames received). This object
applies only to transceiver ports provisioned for the 10
gigabit ethernet LAN protocol.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.4.1.74 |
xcvrHistPMTFRCRXTimeStampThe date and time stamp of the received frames count value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.75 |
xcvrHistPMTFRCRXValidityIndicates the validity of the provided received frames count
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.76 |
xcvrHistPMTFRCRXInitializeUsed to initialize the value of the xcvrHistPMTFRCRXValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.77 |
xcvrHistPMBCSTValueThe total number of good frames received that were directed to
the broadcast address. Note that this does not include
multicast frames. This object applies only to transceiver
ports provisioned for the 10 gigabit ethernet LAN protocol.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.4.1.78 |
xcvrHistPMBCSTTimeStampThe date and time stamp of the broadcast packets received
count value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.79 |
xcvrHistPMBCSTValidityIndicates the validity of the provided broadcast packets
received count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.80 |
xcvrHistPMBCSTInitializeUsed to initialize the value of the xcvrHistPMBCSTValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.81 |
xcvrHistPMMCSTValueThe total number of good frames received that were directed to
a multicast address. Note that this number does not include
frames directed to the broadcast address. This object applies
only to transceiver ports provisioned for the 10 gigabit
ethernet LAN protocol.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.4.1.82 |
xcvrHistPMMCSTTimeStampThe date and time stamp of the multicast packets received
count value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.83 |
xcvrHistPMMCSTValidityIndicates the validity of the provided multicast packets
received count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.84 |
xcvrHistPMMCSTInitializeUsed to initialize the value of the xcvrHistPMMCSTValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.85 |
xcvrHistPMSIZE64ValueThe total number of 64 byte frames received (excluding framing
bits but including FCS octets). This object applies only to
transceiver ports provisioned for the 10 gigabit ethernet LAN
protocol.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.4.1.86 |
xcvrHistPMSIZE64TimeStampThe date and time stamp of the count of 64-byte packets
received.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.87 |
xcvrHistPMSIZE64ValidityIndicates the validity of the provided count of 64-byte
packets packets received.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.88 |
xcvrHistPMSIZE64InitializeUsed to initialize the value of the xcvrHistPMSIZE64Value
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.89 |
xcvrHistPMSIZE65To127ValueThe total number of frames received that are 65 to 127 bytes
inclusive in length (excluding framing bits but including FCS
octets). This object applies only to transceiver ports
provisioned for the 10 gigabit ethernet LAN protocol.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.4.1.90 |
xcvrHistPMSIZE65To127TimeStampThe date and time stamp of the count of packets between 65 and
127 bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.91 |
xcvrHistPMSIZE65To127ValidityIndicates the validity of the provided count of packets
between 65 and 127 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.92 |
xcvrHistPMSIZE65To127InitializeUsed to initialize the value of the xcvrHistPMSIZE65To127Value
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.93 |
xcvrHistPMSIZE128To255ValueThe total number of frames received that are 128 to 255 bytes
inclusive in length (excluding framing bits but including FCS
octets). This object applies only to transceiver ports
provisioned for the 10 gigabit ethernet LAN protocol.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.4.1.94 |
xcvrHistPMSIZE128To255TimeStampThe date and time stamp of the count of packets between 128
and 255 bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.95 |
xcvrHistPMSIZE128To255ValidityIndicates the validity of the provided count of packets
between 128 and 255 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.96 |
xcvrHistPMSIZE128To255InitializeUsed to initialize the value of the
xcvrHistPMSIZE128To255Value object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.97 |
xcvrHistPMSIZE256To511ValueThe total number of frames received that are 256 to 511 bytes
inclusive in length (excluding framing bits but including FCS
octets). This object applies only to transceiver ports
provisioned for the 10 gigabit ethernet LAN protocol.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.4.1.98 |
xcvrHistPMSIZE256To511TimeStampThe date and time stamp of the count of packets between 256
and 511 bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.99 |
xcvrHistPMSIZE256To511ValidityIndicates the validity of the provided count of packets
between 256 and 511 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.100 |
xcvrHistPMSIZE256To511InitializeUsed to initialize the value of the
xcvrHistPMSIZE256To511Value object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.101 |
xcvrHistPMSIZE512To1023ValueThe total number of frames received that are 512 to 1023 bytes
inclusive in length (excluding framing bits but including FCS
octets). This object applies only to transceiver ports
provisioned for the 10 gigabit ethernet LAN protocol.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.4.1.102 |
xcvrHistPMSIZE512To1023TimeStampThe date and time stamp of the count of packets between 512
and 1023 bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.103 |
xcvrHistPMSIZE512To1023ValidityIndicates the validity of the provided count of packets
between 512 and 1023 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.104 |
xcvrHistPMSIZE512To1023InitializeUsed to initialize the value of the
xcvrHistPMSIZE512To1023Value object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.105 |
xcvrHistPMSIZE1024To1518ValueThe total number of frames received that are 1024 to 1518
bytes inclusive in length (excluding framing bits but
including FCS octets). This object applies only to transceiver
ports provisioned for the 10 gigabit ethernet LAN protocol.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.4.1.106 |
xcvrHistPMSIZE1024To1518TimeStampThe date and time stamp of the count of packets between 1024
and 1518 bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.107 |
xcvrHistPMSIZE1024To1518ValidityIndicates the validity of the provided count of packets
between 1024 and 1518 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.108 |
xcvrHistPMSIZE1024To1518InitializeUsed to initialize the value of the
xcvrHistPMSIZE1024To1518Value object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.109 |
xcvrHistPMSIZEOver1518ValueThe total number of frames received that are greater than or
equal to 1519 bytes in length (excluding framing bits but
including FCS octets). This object applies only to transceiver
ports provisioned for the 10 gigabit ethernet LAN protocol.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.4.1.110 |
xcvrHistPMSIZEOver1518TimeStampThe date and time stamp of the count of packets over 1518
bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.111 |
xcvrHistPMSIZEOver1518ValidityIndicates the validity of the provided count of packets over
1518 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.112 |
xcvrHistPMSIZEOver1518InitializeUsed to initialize the value of the
xcvrHistPMSIZEOver1518Value object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.113 |
xcvrHistPMFCSEValueThe count of packets that had a valid length but had either a
Frame Check Sequence (FCS) or a bad FCS with a non-integral
number of octets (Alignment Error) . This object applies only
to transceiver ports provisioned for the 10 gigabit ethernet
LAN protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.114 |
xcvrHistPMFCSETimeStampThe date and time stamp of the count of packets with bad FCS
or alignment error.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.115 |
xcvrHistPMFCSEValidityIndicates the validity of the provided count of packets with
bad FCS or alignment error.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.116 |
xcvrHistPMFRDRValueThe total number of dropped frames due to lack of resources or
otherwise. Note that this number is not necessarily the number
of frames dropped; it is just the number of times that it
could be detected. This object applies only to transceiver
ports provisioned for the 10 gigabit ethernet LAN protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.117 |
xcvrHistPMFRDRTimeStampThe date and time stamp of the count of dropped packets.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.118 |
xcvrHistPMFRDRValidityIndicates the validity of the provided count of dropped
packets.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.119 |
xcvrHistPMUSIZEValueThe total number of frames received that were less than 64
octets long (excluding framing bits, but including FCS octets)
and were otherwise well formed. This object applies only to
transceiver ports provisioned for the 10 gigabit ethernet LAN
protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.120 |
xcvrHistPMUSIZETimeStampThe date and time stamp of the count of undersized packets.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.121 |
xcvrHistPMUSIZEValidityIndicates the validity of the provided count of undersized
packets.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.122 |
xcvrHistPMOSIZEValueThe total number of frames received that were longer than 9600
octets (excluding framing bits, but including FCS octets) and
were otherwise well formed. This object applies only to
transceiver ports provisioned for the 10 gigabit ethernet LAN
protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.123 |
xcvrHistPMOSIZETimeStampThe date and time stamp of the count of oversized packets.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.124 |
xcvrHistPMOSIZEValidityIndicates the validity of the provided count of oversized
packets.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.125 |
xcvrHistPMFRGTValueThe total number of frames received that were less than 64
octets in length (excluding framing bits but including FCS
octets) and had either a bad Frame Check Sequence (FCS) with
an integral number of octets (FCS Error) or a bad FCS with a
non-integral number of octets (Alignment Error). This object
applies only to transceiver ports provisioned for the 10
gigabit ethernet LAN protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.126 |
xcvrHistPMFRGTTimeStampThe date and time stamp of the count of received packet
fragments.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.127 |
xcvrHistPMFRGTValidityIndicates the validity of the provided count of received
packet fragments.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.128 |
xcvrHistPMJABRValueThe total number of frames received that were longer than
14336 9600 octets (excluding framing bits, but including FCS
octets), and had either a bad Frame Check Sequence (FCS) with
an integral number of octets (FCS Error) or a bad FCS with
non-integral number of octets (Alignment Error). This object
applies only to transceiver ports provisioned for the 10
gigabit ethernet LAN protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.129 |
xcvrHistPMJABRTimeStampThe date and time stamp of the count of received jabbers.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.130 |
xcvrHistPMJABRValidityIndicates the validity of the provided count of received
jabbers.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.131 |
xcvrHistPMOTUEBValueThe count of OTN digital wrapper layer errored blocks.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.132 |
xcvrHistPMOTUEBTimeStampThe date and time stamp of the OTN digital wrapper layer
errored blocks value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.133 |
xcvrHistPMOTUEBValidityIndicates the validity of the provided OTN digital wrapper
layer errored blocks value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.134 |
xcvrHistPMOTUBBEValueThe count of OTN digital wrapper layer background block
errors.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.135 |
xcvrHistPMOTUBBETimeStampThe date and time stamp of the OTN digital wrapper layer
background block errors.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.136 |
xcvrHistPMOTUBBEValidityIndicates the validity of the provided OTN digital wrapper
layer background block errors value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.137 |
xcvrHistPMOTUESValueThe count of errored seconds at the OTN digital wrapper
layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.138 |
xcvrHistPMOTUESTimeStampThe date and time stamp of the OTN digital wrapper layer
errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.139 |
xcvrHistPMOTUESValidityIndicates the validity of the provided OTN digital wrapper
layer errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.140 |
xcvrHistPMOTUSESValueThe count of severely errored seconds at the OTN digital
wrapper layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.141 |
xcvrHistPMOTUSESTimeStampThe date and time stamp of the OTN digital wrapper layer
severely errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.142 |
xcvrHistPMOTUSESValidityIndicates the validity of the provided OTN digital wrapper
layer severely errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.143 |
xcvrHistPMOTUOFSValueThe count of Out-Of-Frame seconds at the OTN digital wrapper
layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.144 |
xcvrHistPMOTUOFSTimeStampThe date and time stamp of the OTN digital wrapper layer
Out-Of-Frame seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.145 |
xcvrHistPMOTUOFSValidityIndicates the validity of the provided OTN digital wrapper
layer Out-of-Frame seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.146 |
xcvrHistPMSupplyVoltage2ValueA second supply voltage value on the transceiver.ro FixedX10 UNITS "mVolts/10" .1.3.6.1.4.1.18070.2.2.1.6.4.1.147 |
xcvrHistPMSupplyVoltage2TimeStampThe date and time stamp of the second supply voltage value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.148 |
xcvrHistPMSupplyVoltage2ValidityIndicates the validity of the provided second supply voltage
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.149 |
xcvrHistPMCVSInitializeUsed to initialize the value of the xcvrHistPMCVSValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.150 |
xcvrHistPMESSInitializeUsed to initialize the value of the xcvrHistPMESSValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.151 |
xcvrHistPMSESSInitializeUsed to initialize the value of the xcvrHistPMSESSValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.152 |
xcvrHistPMSEFSSInitializeUsed to initialize the value of the xcvrHistPMSEFSSValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.153 |
xcvrHistPMRSEBInitializeUsed to initialize the value of the xcvrHistPMRSEBValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.154 |
xcvrHistPMRSBBEInitializeUsed to initialize the value of the xcvrHistPMRSBBEValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.155 |
xcvrHistPMRSESInitializeUsed to initialize the value of the xcvrHistPMRSESValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.156 |
xcvrHistPMRSSESInitializeUsed to initialize the value of the xcvrHistPMRSSESValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.157 |
xcvrHistPMRSOFSInitializeUsed to initialize the value of the xcvrHistPMRSOFSValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.158 |
xcvrHistPMCVInitializeUsed to initialize the value of the xcvrHistPMCVValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.159 |
xcvrHistPMESInitializeUsed to initialize the value of the xcvrHistPMESValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.160 |
xcvrHistPMSESInitializeUsed to initialize the value of the xcvrHistPMSESValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.161 |
xcvrHistPMINVBLKInitializeUsed to initialize the value of the xcvrHistPMINVBLKValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.162 |
xcvrHistPMNBITCRInitializeUsed to initialize the value of the xcvrHistPMNBITCRValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.163 |
xcvrHistPMNBYTCRInitializeUsed to initialize the value of the xcvrHistPMNBYTCRValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.164 |
xcvrHistPMUNCRCDWInitializeUsed to initialize the value of the xcvrHistPMUNCRCDWValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.165 |
xcvrHistPMFCSEInitializeUsed to initialize the value of the xcvrHistPMFCSEValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.166 |
xcvrHistPMFRDRInitializeUsed to initialize the value of the xcvrHistPMFRDRValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.167 |
xcvrHistPMUSIZEInitializeUsed to initialize the value of the xcvrHistPMUSIZEValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.168 |
xcvrHistPMOSIZEInitializeUsed to initialize the value of the xcvrHistPMOSIZEValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.169 |
xcvrHistPMFRGTInitializeUsed to initialize the value of the xcvrHistPMFRGTValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.170 |
xcvrHistPMJABRInitializeUsed to initialize the value of the xcvrHistPMJABRValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.171 |
xcvrHistPMOTUEBInitializeUsed to initialize the value of the xcvrHistPMOTUEBValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.172 |
xcvrHistPMOTUBBEInitializeUsed to initialize the value of the xcvrHistPMOTUBBEValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.173 |
xcvrHistPMOTUESInitializeUsed to initialize the value of the xcvrHistPMOTUESValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.174 |
xcvrHistPMOTUSESInitializeUsed to initialize the value of the xcvrHistPMOTUSESValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.175 |
xcvrHistPMOTUOFSInitializeUsed to initialize the value of the xcvrHistPMOTUOFSValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.176 |
xcvrHistPMUASSValueThe count of unavailable seconds at the section layer.
This object applies only to transciever ports provisioned for
a SONET OC-N protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.177 |
xcvrHistPMUASSTimeStampThe date and time stamp of the section layer unavailable
seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.178 |
xcvrHistPMUASSValidityIndicates the validity of the provided section layer
unavailable seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.179 |
xcvrHistPMUASSInitializeUsed to initialize the value of the xcvrHistPMUASSValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.180 |
xcvrHistPMRSUASValueThe count of regenerator section unavailable seconds.
This object applies only to transciever ports provisioned for
a SDH STM-N protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.181 |
xcvrHistPMRSUASTimeStampThe date and time stamp of the regenerator section
unavailable seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.182 |
xcvrHistPMRSUASValidityIndicates the validity of the provided regenerator section
unavailable seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.183 |
xcvrHistPMRSUASInitializeUsed to initialize the value of the xcvrHistPMRSUASValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.184 |
xcvrHistPMUASValueThe count of unavailable seconds. This object applies
only to transciever ports provisioned for the gigabit ethernet
protocol or a fiber channel protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.185 |
xcvrHistPMUASTimeStampThe date and time stamp of the unavailable seconds
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.186 |
xcvrHistPMUASValidityIndicates the validity of the provided unavailable
seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.187 |
xcvrHistPMUASInitializeUsed to initialize the value of the xcvrHistPMUASValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.188 |
xcvrHistPMOTUUASValueThe count of unavailable seconds at the OTN digital
wrapper layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.4.1.189 |
xcvrHistPMOTUUASTimeStampThe date and time stamp of the OTN digital wrapper layer
unavailable seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.190 |
xcvrHistPMOTUUASValidityIndicates the validity of the provided OTN digital wrapper
layer unavailable seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.191 |
xcvrHistPMOTUUASInitializeUsed to initialize the value of the xcvrHistPMOTUUASValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.192 |
xcvrHistPMOTNBERValueThe instantaneous BER of transciever ports provisioned for the 10 gigabit
ethernet LAN with FEC protocol.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.193 |
xcvrHistPMOTNBERTimeStampThe date and time stamp of the instantaneous BER.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.194 |
xcvrHistPMOTNBERValidityIndicates the validity of the provided instantaneous BER.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.195 |
xcvrHistPMOTNBERInitializeUsed to initialize the value of the xcvrHistPMOTNBERValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.196 |
xcvrHistPMOTNAVGBERValueThe interval/average BER of transciever ports provisioned for the 10 gigabit
ethernet LAN with FEC protocol.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.197 |
xcvrHistPMOTNAVGBERTimeStampThe date and time stamp of the interval/average BER.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.198 |
xcvrHistPMOTNAVGBERValidityIndicates the validity of the provided interval/average BER.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.199 |
xcvrHistPMOTNAVGBERInitializeUsed to initialize the value of the xcvrHistPMOTNAVGBERValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.200 |
xcvrHistPMNBITCR64BitValueThe 64-bit count of the number of bits corrected. This object
applies only to transciever ports provisioned for a protocol
that includes Forward Error Correction (FEC).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.4.1.201 |
xcvrHistPMNBITCR64BitTimeStampThe date and time stamp of the 64-bit number of bits
corrected value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.202 |
xcvrHistPMNBITCR64BitValidityIndicates the validity of the provided 64-bit number
of bits corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.203 |
xcvrHistPMNBITCR64BitInitializeUsed to initialize the value of the xcvrHistPMNBITCR64BitValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.204 |
xcvrHistPMNBYTCR64BitValueThe 64-bit count of the number of bytes corrected. This object
applies only to transciever ports provisioned for a protocol
that includes Forward Error Correction (FEC).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.4.1.205 |
xcvrHistPMNBYTCR64BitTimeStampThe date and time stamp of the 64-bit number of bytes
corrected value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.206 |
xcvrHistPMNBYTCR64BitValidityIndicates the validity of the provided number of bytes
corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.207 |
xcvrHistPMNBYTCR64BitInitializeUsed to initialize the value of the xcvrHistPMNBYTCR64BitValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.208 |
xcvrHistPMOPRMinValueThe minimum optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.4.1.209 |
xcvrHistPMOPRMinTimeStampThe date and time stamp of the minimum optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.210 |
xcvrHistPMOPRMinValidityIndicates the validity of the provided minimum optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.211 |
xcvrHistPMOPRMinInitializeUsed to initialize the value of the xcvrHistPMOPRMinValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.212 |
xcvrHistPMOPRMaxValueThe maximum optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.4.1.213 |
xcvrHistPMOPRMaxTimeStampThe date and time stamp of the maximum optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.214 |
xcvrHistPMOPRMaxValidityIndicates the validity of the provided maximum optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.215 |
xcvrHistPMOPRMaxInitializeUsed to initialize the value of the xcvrHistPMOPRMaxValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.216 |
xcvrHistPMOPRAvgValueThe average optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.4.1.217 |
xcvrHistPMOPRAvgTimeStampThe date and time stamp of the average optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.218 |
xcvrHistPMOPRAvgValidityIndicates the validity of the provided average optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.219 |
xcvrHistPMOPRAvgInitializeUsed to initialize the value of the xcvrHistPMOPRAvgValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.220 |
xcvrHistPMOPTMinValueThe minimum optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.4.1.221 |
xcvrHistPMOPTMinTimeStampThe date and time stamp of the minimum optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.222 |
xcvrHistPMOPTMinValidityIndicates the validity of the provided minimum optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.223 |
xcvrHistPMOPTMinInitializeUsed to initialize the value of the xcvrHistPMOPTMinValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.224 |
xcvrHistPMOPTMaxValueThe maximum optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.4.1.225 |
xcvrHistPMOPTMaxTimeStampThe date and time stamp of the maximum optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.226 |
xcvrHistPMOPTMaxValidityIndicates the validity of the provided maximum optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.227 |
xcvrHistPMOPTMaxInitializeUsed to initialize the value of the xcvrHistPMOPTMaxValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.228 |
xcvrHistPMOPTAvgValueThe average optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.4.1.229 |
xcvrHistPMOPTAvgTimeStampThe date and time stamp of the average optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.4.1.230 |
xcvrHistPMOPTAvgValidityIndicates the validity of the provided average optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.4.1.231 |
xcvrHistPMOPTAvgInitializeUsed to initialize the value of the xcvrHistPMOPTAvgValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.4.1.232 |
xcvrPMThresholdTableA table of threshold levels for performance monitoring counter
values on optical transceiver facilities, that are used in the
generation of threshold crossing alerts. SEQUENCE OF XcvrPMThresholdEntry .1.3.6.1.4.1.18070.2.2.1.6.5 |
xcvrPMThresholdEntryThe row entry object of the optical transceiver performance
monitoring threshold table. Each row of this table contains a
set of PM thresholds for a given interval type that applies to
an individual optical transceiver. XcvrPMThresholdEntry .1.3.6.1.4.1.18070.2.2.1.6.5.1 |
xcvrPMThresholdTypeIdxThe type of the optical transceiver targeted for PM
thresholds. XcvrType .1.3.6.1.4.1.18070.2.2.1.6.5.1.1 |
xcvrPMThresholdShelfIdxThe shelf number on which the optical transceiver targeted for
PM thresholds is provisioned. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.5.1.2 |
xcvrPMThresholdSlotIdxThe slot number on which the optical transceiver targeted for
PM thresholds is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.5.1.3 |
xcvrPMThresholdIdxThe optical transceiver port number on the circuit pack that
is targeted for PM thresholds. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.5.1.4 |
xcvrPMThresholdIntervalTypeIdxThe type of PM bin according to interval length. Thresholds
are supported for the 15-minute and 1-day PM bins only. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.5.1.5 |
xcvrPMThresholdCVSValueThe threshold for the count of coding violations at the
section layer. This object applies only to transciever ports
provisioned for a SONET OC-N protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.5.1.6 |
xcvrPMThresholdESSValueThe threshold for the count of errored seconds at the section
layer. This object applies only to transciever ports
provisioned for a SONET OC-N protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.5.1.7 |
xcvrPMThresholdSESSValueThe threshold fro the count of severely errored seconds at the
section layer. This object applies only to transciever ports
provisioned for a SONET OC-N protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.5.1.8 |
xcvrPMThresholdSEFSSValueThe threshold for the count of severely errored framing
seconds at the section layer. This object applies only to
transciever ports provisioned for a SONET OC-N protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.5.1.9 |
xcvrPMThresholdRSEBValueThe threshold for the count of regenerator section errored
blocks. This object applies only to transciever ports
provisioned for a SDH STM-N protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.5.1.10 |
xcvrPMThresholdRSBBEValueThe threshold for the count of regenerator section background
block errors. This object applies only to transciever ports
provisioned for a SDH STM-N protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.5.1.11 |
xcvrPMThresholdRSESValueThe threshold for the count of regenerator section errored
seconds. This object applies only to transciever ports
provisioned for a SDH STM-N protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.5.1.12 |
xcvrPMThresholdRSSESValueThe threshold for the count of regenerator section severely
errored seconds. This object applies only to transciever ports
provisioned for a SDH STM-N protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.5.1.13 |
xcvrPMThresholdRSOFSValueThe threshold for the count of regenerator section
out-of-frame seconds. This object applies only to transciever
ports provisioned for a SDH STM-N protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.5.1.14 |
xcvrPMThresholdCVValueThe threshold for the count of coding violations. This object
applies only to transciever ports provisioned for the gigabit
ethernet protocol or a fiber channel protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.5.1.15 |
xcvrPMThresholdESValueThe threshold for the count of errored seconds. This object
applies only to transciever ports provisioned for an
ethernet protocol or a fiber channel protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.5.1.16 |
xcvrPMThresholdSESValueThe threshold for the count of severely errored seconds. This
object applies only to transciever ports provisioned for an
ethernet protocol or a fiber channel protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.5.1.17 |
xcvrPMThresholdINVBLKValueThe threshold for the count of invalid blocks. This object
applies only to transciever ports provisioned for the 10
gigabit ethernet LAN protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.5.1.18 |
xcvrPMThresholdUNCRCDWValueThe threshold for the count of uncorrectable codewords. This
object applies only to transciever ports provisioned for the
10 gigabit ethernet LAN with FEC protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.5.1.21 |
xcvrPMThresholdFCSEValueThe threshold for the count of FCSE packets. This object
applies only to transceiver ports provisioned for the 10
gigabit ethernet LAN protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.5.1.22 |
xcvrPMThresholdFRDRValueThe threshold for the count of dropped frames. This object
applies only to transceiver ports provisioned for the 10
gigabit ethernet LAN protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.5.1.23 |
xcvrPMThresholdUSIZEValueThe threshold for the count of undersized frames. This object
applies only to transceiver ports provisioned for the 10
gigabit ethernet LAN protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.5.1.24 |
xcvrPMThresholdOSIZEValueThe threshold for the count of oversized frames. This object
applies only to transceiver ports provisioned for the 10
gigabit ethernet LAN protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.5.1.25 |
xcvrPMThresholdFRGTValueThe threshold for the count of frame fragments. This object
applies only to transceiver ports provisioned for the 10
gigabit ethernet LAN protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.5.1.26 |
xcvrPMThresholdJABRValueThe threshold for the count of jabbers. This object applies
only to transceiver ports provisioned for the 10 gigabit
ethernet LAN protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.5.1.27 |
xcvrPMThresholdOTUEBValueThe threshold for the count of errored blocks at the OTN
digital wrapper layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.5.1.28 |
xcvrPMThresholdOTUBBEValueThe threshold for the count of background block errors at the
OTN digital wrapper layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.5.1.29 |
xcvrPMThresholdOTUESValueThe threshold for the count of errored seconds at the OTN
digital wrapper layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.5.1.30 |
xcvrPMThresholdOTUSESValueThe threshold for the count of severely errored seconds at the
OTN digital wrapper layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.5.1.31 |
xcvrPMThresholdOTUOFSValueThe threshold for the count of Out-of-Frame seconds at the OTN
digital wrapper layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.5.1.32 |
xcvrPMThresholdUASSValueThe threshold for the count of unavailable seconds at the
section layer. This object applies only to transciever ports
provisioned for a SONET OC-N protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.5.1.33 |
xcvrPMThresholdRSUASValueThe threshold for the count of regenerator section
unavailable seconds. This object applies only to transciever
ports provisioned for a SDH STM-N protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.5.1.34 |
xcvrPMThresholdUASValueThe threshold for the count of unavailable seconds. This
object applies only to transciever ports provisioned for an
ethernet protocol or a fiber channel protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.5.1.35 |
xcvrPMThresholdOTUUASValueThe threshold for the count of unavailable seconds at the
OTN digital wrapper layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.5.1.36 |
amdCrntPMTableA table of current performance monitoring statistics collected
for the ports of active multiplexer-demultiplexer circuit
packs.obsolete SEQUENCE OF AmdCrntPMEntry .1.3.6.1.4.1.18070.2.2.1.6.6 |
amdCrntPMEntryThe row entry object of the active multiplexer-demultiplexer
current performance monitoring table. Each row of this table
contains a full set of PM statistics and related data for a
current measurement interval for a given AMD port.obsolete AmdCrntPMEntry .1.3.6.1.4.1.18070.2.2.1.6.6.1 |
amdCrntPMTypeIdxThe specific type of active multiplexer-demultiplexer circuit
pack on which the facility targeted for PMs is provisioned.obsolete AmdType .1.3.6.1.4.1.18070.2.2.1.6.6.1.1 |
amdCrntPMShelfIdxThe number of the shelf on which the active
multiplexer-demultiplexer facility targeted for PMs is
provisioned.obsolete INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.6.1.2 |
amdCrntPMSlotIdxThe number of the slot within which the active
multiplexer-demultiplexer facility targeted for PMs is
provisioned.obsolete INTEGER (1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.6.6.1.3 |
amdCrntPMLineIdxThe number of the multiplexed wavelength line on the AMD
circuit pack that is targeted for PMs.obsolete INTEGER .1.3.6.1.4.1.18070.2.2.1.6.6.1.4 |
amdCrntPMPortIdxIdentifies a specific port on the identified line of the AMD
circuit pack that is targeted for PMs.obsolete AmdPortType .1.3.6.1.4.1.18070.2.2.1.6.6.1.5 |
amdCrntPMIntervalTypeIdxThe type of PM bin according to interval length.obsolete PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.6.1.6 |
amdCrntPMOPRValueThe optical power received on the input of the AMD port.roobsolete FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.6.1.7 |
amdCrntPMOPRTimeStampThe date and time stamp of the optical power received value.roobsolete DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.6.1.8 |
amdCrntPMOPRValidityIndicates the validity of the provided optical power received
value.roobsolete PMValidity .1.3.6.1.4.1.18070.2.2.1.6.6.1.9 |
amdCrntPMOPTValueThe optical power transmitted at the output of the AMD port.roobsolete FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.6.1.10 |
amdCrntPMOPTTimeStampThe date and time stamp of the optical power transmitted
value.roobsolete DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.6.1.11 |
amdCrntPMOPTValidityIndicates the validity of the provided optical power
transmitted value.roobsolete PMValidity .1.3.6.1.4.1.18070.2.2.1.6.6.1.12 |
amdCrntPMVOAValueThe variable optical attenuation of the AMD port.roobsolete FixedX10 UNITS "dB/10" .1.3.6.1.4.1.18070.2.2.1.6.6.1.13 |
amdCrntPMVOATimeStampThe date and time stamp of the variable optical attenuation
value.roobsolete DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.6.1.14 |
amdCrntPMVOAValidityIndicates the validity of the provided variable optical
attenuation value.roobsolete PMValidity .1.3.6.1.4.1.18070.2.2.1.6.6.1.15 |
amdCrntPMLitChnValueThe number of muxed channels with light on the line port.roobsolete INTEGER .1.3.6.1.4.1.18070.2.2.1.6.6.1.16 |
amdCrntPMLitChnTimeStampThe date and time stamp of the number of lit channels value.roobsolete DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.6.1.17 |
amdCrntPMLitChnValidityIndicates the validity of the provided number of lit channels
value.roobsolete PMValidity .1.3.6.1.4.1.18070.2.2.1.6.6.1.18 |
amdHistPMTableA table of historical performance monitoring statistics
collected for the ports of active multiplexer-demultiplexer
circuit packs.obsolete SEQUENCE OF AmdHistPMEntry .1.3.6.1.4.1.18070.2.2.1.6.7 |
amdHistPMEntryThe row entry object of the active multiplexer-demultiplexer
historical performance monitoring table. Each row of this
table contains a full set of PM statistics and related data
for a historical measurement interval for a given AMD port.obsolete AmdHistPMEntry .1.3.6.1.4.1.18070.2.2.1.6.7.1 |
amdHistPMTypeIdxThe specific type of active multiplexer-demultiplexer circuit
pack on which the facility targeted for PMs is provisioned.obsolete AmdType .1.3.6.1.4.1.18070.2.2.1.6.7.1.1 |
amdHistPMShelfIdxThe number of the shelf on which the active
multiplexer-demultiplexer facility targeted for PMs is
provisioned.obsolete INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.7.1.2 |
amdHistPMSlotIdxThe number of the slot within which the active
multiplexer-demultiplexer facility targeted for PMs is
provisioned.obsolete INTEGER (1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.6.7.1.3 |
amdHistPMLineIdxThe number of the multiplexed wavelength line on the AMD
circuit pack that is targeted for PMs.obsolete INTEGER .1.3.6.1.4.1.18070.2.2.1.6.7.1.4 |
amdHistPMPortIdxIdentifies a specific port on the identified line of the AMD
circuit pack that is targeted for PMs.obsolete AmdPortType .1.3.6.1.4.1.18070.2.2.1.6.7.1.5 |
amdHistPMIntervalTypeIdxThe type of PM bin according to interval length.obsolete PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.7.1.6 |
amdHistPMIntervalIdxThe specific PM bin number. The range is 1 to 96 for the
15-minute historical bins. For the 1-day historical bin, the
value is 1.obsolete INTEGER .1.3.6.1.4.1.18070.2.2.1.6.7.1.7 |
amdHistPMOPRValueThe optical power received on the input of the AMD port.roobsolete FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.7.1.8 |
amdHistPMOPRTimeStampThe date and time stamp of the optical power received value.roobsolete DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.7.1.9 |
amdHistPMOPRValidityIndicates the validity of the provided optical power received
value.roobsolete PMValidity .1.3.6.1.4.1.18070.2.2.1.6.7.1.10 |
amdHistPMOPTValueThe optical power transmitted at the output of the AMD port.roobsolete FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.7.1.11 |
amdHistPMOPTTimeStampThe date and time stamp of the optical power transmitted
value.roobsolete DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.7.1.12 |
amdHistPMOPTValidityIndicates the validity of the provided optical power
transmitted value.roobsolete PMValidity .1.3.6.1.4.1.18070.2.2.1.6.7.1.13 |
amdHistPMVOAValueThe variable optical attenuation of the AMD port.roobsolete FixedX10 UNITS "dB/10" .1.3.6.1.4.1.18070.2.2.1.6.7.1.14 |
amdHistPMVOATimeStampThe date and time stamp of the variable optical attenuation
value.roobsolete DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.7.1.15 |
amdHistPMVOAValidityIndicates the validity of the provided variable optical
attenuation valcue.roobsolete PMValidity .1.3.6.1.4.1.18070.2.2.1.6.7.1.16 |
amdHistPMLitChnValueThe number of muxed channels with light on the line port.roobsolete INTEGER .1.3.6.1.4.1.18070.2.2.1.6.7.1.17 |
amdHistPMLitChnTimeStampThe date and time stamp of the number of lit channels value.roobsolete DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.7.1.18 |
amdHistPMLitChnValidityIndicates the validity of the provided number of lit channels
value.roobsolete PMValidity .1.3.6.1.4.1.18070.2.2.1.6.7.1.19 |
ocnCrntPMTableA table of current performance monitoring statistics collected
for the SONET OC-N facilities on the NE. SEQUENCE OF OcnCrntPMEntry .1.3.6.1.4.1.18070.2.2.1.6.8 |
ocnCrntPMEntryThe row entry object of the SONET OC-N current performance
monitoring table. Each row of this table contains a full set
of PM statistics and related data for a current measurement
interval for a given OC-N facility. OcnCrntPMEntry .1.3.6.1.4.1.18070.2.2.1.6.8.1 |
ocnCrntPMTypeIdxThe type of OC-N facility targeted for PMs. OcnType .1.3.6.1.4.1.18070.2.2.1.6.8.1.1 |
ocnCrntPMShelfIdxThe number of the shelf on which the OC-N facility targeted
for PMs is provisioned. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.8.1.2 |
ocnCrntPMSlotIdxThe number of the slot within which the OC-N facility targeted
for PMs is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.8.1.3 |
ocnCrntPMPortIdxThe number of the port on the circuit pack on which the OC-N
facility targeted for PMs is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.8.1.4 |
ocnCrntPMIntervalTypeIdxThe type of PM bin according to interval length. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.8.1.5 |
ocnCrntPMOPRValueThe optical power received on the input of the OC-N facility
port.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.8.1.6 |
ocnCrntPMOPRTimeStampThe date and time stamp of the optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.7 |
ocnCrntPMOPRValidityIndicates the validity of the provided optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.8 |
ocnCrntPMOPTValueThe optical power transmitted at the output of the OC-N
facility port.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.8.1.9 |
ocnCrntPMOPTTimeStampThe date and time stamp of the optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.10 |
ocnCrntPMOPTValidityIndicates the validity of the provided optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.11 |
ocnCrntPMTempValueThe temperature measured on the OC-N facility port.ro INTEGER (-32768..32767) UNITS "degrees Celsius" .1.3.6.1.4.1.18070.2.2.1.6.8.1.12 |
ocnCrntPMTempTimeStampThe date and time stamp of the temperature value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.13 |
ocnCrntPMTempValidityIndicates the validity of the provided temperature value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.14 |
ocnCrntPMSupplyVoltageValueThe supply voltage measured on the OC-N facility port.ro FixedX10 UNITS "mVolts/10" .1.3.6.1.4.1.18070.2.2.1.6.8.1.15 |
ocnCrntPMSupplyVoltageTimeStampThe date and time stamp of the supply voltage value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.16 |
ocnCrntPMSupplyVoltageValidityIndicates the validity of the provided supply voltage value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.17 |
ocnCrntPMLBCValueThe laser bias current measured on the OC-N facility port.ro INTEGER (-32768..32767) UNITS "mAmp" .1.3.6.1.4.1.18070.2.2.1.6.8.1.18 |
ocnCrntPMLBCTimeStampThe date and time stamp of the laser bias current value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.19 |
ocnCrntPMLBCValidityIndicates the validity of the provided laser bias current
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.20 |
ocnCrntPMCVSValueThe count of coding violations at the section layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.8.1.21 |
ocnCrntPMCVSTimeStampThe date and time stamp of the section layer coding violations
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.22 |
ocnCrntPMCVSValidityIndicates the validity of the provided section layer coding
violations value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.23 |
ocnCrntPMESSValueThe count of errored seconds at the section layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.8.1.24 |
ocnCrntPMESSTimeStampThe date and time stamp of the section layer errored seconds
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.25 |
ocnCrntPMESSValidityIndicates the validity of the provided section layer errored
seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.26 |
ocnCrntPMSESSValueThe count of severely errored seconds at the section layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.8.1.27 |
ocnCrntPMSESSTimeStampThe date and time stamp of the section layer severely errored
seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.28 |
ocnCrntPMSESSValidityIndicates the validity of the provided section layer severely
errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.29 |
ocnCrntPMSEFSSValueThe count of severely errored framing seconds at the section
layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.8.1.30 |
ocnCrntPMSEFSSTimeStampThe date and time stamp of the section layer severely errored
framing seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.31 |
ocnCrntPMSEFSSValidityIndicates the validity of the provided section layer severely
errored framing seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.32 |
ocnCrntPMSupplyVoltage2ValueThe value of the second supply voltage source measured on the
OC-N facility port transceiver.ro FixedX10 UNITS "mVolts/10" .1.3.6.1.4.1.18070.2.2.1.6.8.1.33 |
ocnCrntPMSupplyVoltage2TimeStampThe date and time stamp of the second supply voltage value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.34 |
ocnCrntPMSupplyVoltage2ValidityIndicates the validity of the provided second supply voltage
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.35 |
ocnCrntPMCVLValueThe count of coding violations at the line layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.8.1.36 |
ocnCrntPMCVLTimeStampThe date and time stamp of the line layer coding violations
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.37 |
ocnCrntPMCVLValidityIndicates the validity of the provided line layer coding
violations value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.38 |
ocnCrntPMESLValueThe count of errored seconds at the line layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.8.1.39 |
ocnCrntPMESLTimeStampThe date and time stamp of the line layer errored seconds
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.40 |
ocnCrntPMESLValidityIndicates the validity of the provided line layer errored
seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.41 |
ocnCrntPMSESLValueThe count of severely errored seconds at the line layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.8.1.42 |
ocnCrntPMSESLTimeStampThe date and time stamp of the line layer severely errored
seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.43 |
ocnCrntPMSESLValidityIndicates the validity of the provided line layer severely
errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.44 |
ocnCrntPMUASLValueThe count of unavailable seconds at the line layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.8.1.45 |
ocnCrntPMUASLTimeStampThe date and time stamp of the line layer unavailable seconds
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.46 |
ocnCrntPMUASLValidityIndicates the validity of the provided line layer unavailable
seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.47 |
ocnCrntPMOTUEBValueThe count of OTU digital wrapper layer errored blocks.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.8.1.48 |
ocnCrntPMOTUEBTimeStampThe date and time stamp of the OTU digital wrapper layer
errored blocks value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.49 |
ocnCrntPMOTUEBValidityIndicates the validity of the provided OTU digital wrapper
layer errored blocks value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.50 |
ocnCrntPMOTUBBEValueThe count of OTU digital wrapper layer background block
errors.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.8.1.51 |
ocnCrntPMOTUBBETimeStampThe date and time stamp of the OTU digital wrapper layer
background block errors value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.52 |
ocnCrntPMOTUBBEValidityIndicates the validity of the provided OTU digital wrapper
layer background block errors value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.53 |
ocnCrntPMOTUESValueThe count of OTU digital wrapper layer errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.8.1.54 |
ocnCrntPMOTUESTimeStampThe date and time stamp of the OTU digital wrapper layer
errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.55 |
ocnCrntPMOTUESValidityIndicates the validity of the provided OTU digital wrapper
layer errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.56 |
ocnCrntPMOTUSESValueThe count of OTU digital wrapper layer severely errored
seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.8.1.57 |
ocnCrntPMOTUSESTimeStampThe date and time stamp of the OTU digital wrapper layer
severely errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.58 |
ocnCrntPMOTUSESValidityIndicates the validity of the provided OTU digital wrapper
layer severely errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.59 |
ocnCrntPMOTUOFSValueThe count of OTU digital wrapper layer out-of-frame seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.8.1.60 |
ocnCrntPMOTUOFSTimeStampThe date and time stamp of the OTU digital wrapper layer
out-of-frame seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.61 |
ocnCrntPMOTUOFSValidityIndicates the validity of the provided OTU digital wrapper
layer out-of-frame seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.62 |
ocnCrntPMNBITCRValueThe count of the number of bits corrected. This object applies
only to OC-192 line port provisioned for OTN line mapping.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.8.1.63 |
ocnCrntPMNBITCRTimeStampThe date and time stamp of the number of bits corrected
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.64 |
ocnCrntPMNBITCRValidityIndicates the validity of the provided number of bits
corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.65 |
ocnCrntPMNBYTCRValueThe count of the number of bytes corrected. This object
applies only to OC-192 line port provisioned for OTN line
mapping.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.8.1.66 |
ocnCrntPMNBYTCRTimeStampThe date and time stamp of the number of bytes corrected
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.67 |
ocnCrntPMNBYTCRValidityIndicates the validity of the provided number of bytes
corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.68 |
ocnCrntPMUNCRCDWValueThe count of uncorrectable codewords. This object applies only
to OC-192 line port provisioned for OTN line mapping.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.8.1.69 |
ocnCrntPMUNCRCDWTimeStampThe date and time stamp of the uncorrectable codewords value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.70 |
ocnCrntPMUNCRCDWValidityIndicates the validity of the provided uncorrectable codewords
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.71 |
ocnCrntPMCVSInitializeUsed to initialize the value of the ocnCrntPMCVSValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.8.1.72 |
ocnCrntPMESSInitializeUsed to initialize the value of the ocnCrntPMESSValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.8.1.73 |
ocnCrntPMSESSInitializeUsed to initialize the value of the ocnCrntPMSESSValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.8.1.74 |
ocnCrntPMSEFSSInitializeUsed to initialize the value of the ocnCrntPMSEFSSValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.8.1.75 |
ocnCrntPMCVLInitializeUsed to initialize the value of the ocnCrntPMCVLValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.8.1.76 |
ocnCrntPMESLInitializeUsed to initialize the value of the ocnCrntPMESLValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.8.1.77 |
ocnCrntPMSESLInitializeUsed to initialize the value of the ocnCrntPMSESLValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.8.1.78 |
ocnCrntPMUASLInitializeUsed to initialize the value of the ocnCrntPMUASLValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.8.1.79 |
ocnCrntPMOTUEBInitializeUsed to initialize the value of the ocnCrntPMOTUEBValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.8.1.80 |
ocnCrntPMOTUBBEInitializeUsed to initialize the value of the ocnCrntPMOTUBBEValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.8.1.81 |
ocnCrntPMOTUESInitializeUsed to initialize the value of the ocnCrntPMOTUESValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.8.1.82 |
ocnCrntPMOTUSESInitializeUsed to initialize the value of the ocnCrntPMOTUSESValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.8.1.83 |
ocnCrntPMOTUOFSInitializeUsed to initialize the value of the ocnCrntPMOTUOFSValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.8.1.84 |
ocnCrntPMNBITCRInitializeUsed to initialize the value of the ocnCrntPMNBITCRValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.8.1.85 |
ocnCrntPMNBYTCRInitializeUsed to initialize the value of the ocnCrntPMNBYTCRValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.8.1.86 |
ocnCrntPMUNCRCDWInitializeUsed to initialize the value of the ocnCrntPMUNCRCDWValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.8.1.87 |
ocnCrntPMOTNBERValueThe instantaneous BER of OC-192 line port provisioned for OTN line mapping.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.88 |
ocnCrntPMOTNBERTimeStampThe date and time stamp of the instantaneous BER.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.89 |
ocnCrntPMOTNBERValidityIndicates the validity of the provided instantaneous BER.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.90 |
ocnCrntPMOTNBERInitializeUsed to initialize the value of the ocnCrntPMOTNBERValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.8.1.91 |
ocnCrntPMOTNAVGBERValueThe interval/average BER of OC-192 line port provisioned for OTN line mapping.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.92 |
ocnCrntPMOTNAVGBERTimeStampThe date and time stamp of the interval/average BER.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.93 |
ocnCrntPMOTNAVGBERValidityIndicates the validity of the provided interval/average BER.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.94 |
ocnCrntPMOTNAVGBERInitializeUsed to initialize the value of the ocnCrntPMOTNAVGBERValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.8.1.95 |
ocnCrntPMNBITCR64BitValueThe 64-bit count of the number of bits corrected. This object
applies only to OC-192 line port provisioned for OTN line mapping.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.8.1.96 |
ocnCrntPMNBITCR64BitTimeStampThe date and time stamp of the 64-bit number of bits corrected
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.97 |
ocnCrntPMNBITCR64BitValidityIndicates the validity of the provided 64-bit number of bits
corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.98 |
ocnCrntPMNBITCR64BitInitializeUsed to initialize the value of the ocnCrntPMNBITCR64BitValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.8.1.99 |
ocnCrntPMNBYTCR64BitValueThe 64-bit count of the number of bytes corrected. This object
applies only to OC-192 line port provisioned for OTN line
mapping.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.8.1.100 |
ocnCrntPMNBYTCR64BitTimeStampThe date and time stamp of the 64-bit number of bytes corrected
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.101 |
ocnCrntPMNBYTCR64BitValidityIndicates the validity of the provided 64-bit number of bytes
corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.102 |
ocnCrntPMNBYTCR64BitInitializeUsed to initialize the value of the ocnCrntPMNBYTCR64BitValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.8.1.103 |
ocnCrntPMUASSValueThe count of unavailable seconds at the section layer.
This object applies only to OC-192 line port provisioned
for OTN line mapping.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.8.1.104 |
ocnCrntPMUASSTimeStampThe date and time stamp of the unavailable seconds at
the section layerro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.105 |
ocnCrntPMUASSValidityIndicates the validity of the unavailable seconds at
the section layer.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.106 |
ocnCrntPMUASSInitializeUsed to initialize the value of the ocnCrntPMUASSValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.8.1.107 |
ocnCrntPMOTUUASValueThe count of OTU digital wrapper layer unavailable seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.8.1.108 |
ocnCrntPMOTUUASTimeStampThe date and time stamp of the OTU digital wrapper layer
unavailable seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.109 |
ocnCrntPMOTUUASValidityIndicates the validity of the provided OTU digital wrapper
layer unavailable seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.110 |
ocnCrntPMOTUUASInitializeUsed to initialize the value of the ocnCrntPMOTUUASValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.8.1.111 |
ocnCrntPMOPRMinValueThe minimum optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.8.1.112 |
ocnCrntPMOPRMinTimeStampThe date and time stamp of the minimum optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.113 |
ocnCrntPMOPRMinValidityIndicates the validity of the provided minimum optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.114 |
ocnCrntPMOPRMinInitializeUsed to initialize the value of the ocnCrntPMOPRMinValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.8.1.115 |
ocnCrntPMOPRMaxValueThe maximum optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.8.1.116 |
ocnCrntPMOPRMaxTimeStampThe date and time stamp of the maximum optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.117 |
ocnCrntPMOPRMaxValidityIndicates the validity of the provided maximum optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.118 |
ocnCrntPMOPRMaxInitializeUsed to initialize the value of the ocnCrntPMOPRMaxValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.8.1.119 |
ocnCrntPMOPRAvgValueThe average optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.8.1.120 |
ocnCrntPMOPRAvgTimeStampThe date and time stamp of the average optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.121 |
ocnCrntPMOPRAvgValidityIndicates the validity of the provided average optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.122 |
ocnCrntPMOPRAvgInitializeUsed to initialize the value of the ocnCrntPMOPRAvgValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.8.1.123 |
ocnCrntPMOPTMinValueThe minimum optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.8.1.124 |
ocnCrntPMOPTMinTimeStampThe date and time stamp of the minimum optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.125 |
ocnCrntPMOPTMinValidityIndicates the validity of the provided minimum optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.126 |
ocnCrntPMOPTMinInitializeUsed to initialize the value of the ocnCrntPMOPTMinValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.8.1.127 |
ocnCrntPMOPTMaxValueThe maximum optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.8.1.128 |
ocnCrntPMOPTMaxTimeStampThe date and time stamp of the maximum optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.129 |
ocnCrntPMOPTMaxValidityIndicates the validity of the provided maximum optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.130 |
ocnCrntPMOPTMaxInitializeUsed to initialize the value of the ocnCrntPMOPTMaxValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.8.1.131 |
ocnCrntPMOPTAvgValueThe average optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.8.1.132 |
ocnCrntPMOPTAvgTimeStampThe date and time stamp of the average optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.8.1.133 |
ocnCrntPMOPTAvgValidityIndicates the validity of the provided average optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.8.1.134 |
ocnCrntPMOPTAvgInitializeUsed to initialize the value of the ocnCrntPMOPTAvgValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.8.1.135 |
ocnHistPMTableA table of historical performance monitoring statistics
collected for the SONET OC-N facilities on the NE. SEQUENCE OF OcnHistPMEntry .1.3.6.1.4.1.18070.2.2.1.6.9 |
ocnHistPMEntryThe row entry object of the SONET OC-N historical performance
monitoring table. Each row of this table contains a full set
of PM statistics and related data for a historical measurement
interval for a given OC-N facility. OcnHistPMEntry .1.3.6.1.4.1.18070.2.2.1.6.9.1 |
ocnHistPMTypeIdxThe type of the OC-N facility targeted for PMs. OcnType .1.3.6.1.4.1.18070.2.2.1.6.9.1.1 |
ocnHistPMShelfIdxThe number of the shelf on which the OC-N facility targeted
for PMs is provisioned. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.9.1.2 |
ocnHistPMSlotIdxThe number of the slot within which the OC-N facility targeted
for PMs is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.9.1.3 |
ocnHistPMPortIdxThe number of the port on the circuit pack on which the OC-N
facility targeted for PMs is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.9.1.4 |
ocnHistPMIntervalTypeIdxThe type of PM bin according to interval length. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.9.1.5 |
ocnHistPMIntervalIdxThe specific PM bin number. The range is 1 to 96 for the
15-minute historical bins. For the 1-day historical bin, the
value is 1. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.9.1.6 |
ocnHistPMOPRValueThe optical power received on the input of the OC-N facility.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.9.1.7 |
ocnHistPMOPRTimeStampThe date and time stamp of the optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.8 |
ocnHistPMOPRValidityIndicates the validity of the provided optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.9 |
ocnHistPMOPTValueThe optical power transmitted at the output of the OC-N
facility.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.9.1.10 |
ocnHistPMOPTTimeStampThe date and time stamp of the optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.11 |
ocnHistPMOPTValidityIndicates the validity of the provided optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.12 |
ocnHistPMTempValueThe temperature measured on the OC-N facility port.ro INTEGER (-32768..32767) UNITS "degrees Celsius" .1.3.6.1.4.1.18070.2.2.1.6.9.1.13 |
ocnHistPMTempTimeStampThe date and time stamp of the temperature value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.14 |
ocnHistPMTempValidityIndicates the validity of the provided temperature value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.15 |
ocnHistPMSupplyVoltageValueThe supply voltage measured on the OC-N facility port.ro FixedX10 UNITS "mVolts/10" .1.3.6.1.4.1.18070.2.2.1.6.9.1.16 |
ocnHistPMSupplyVoltageTimeStampThe date and time stamp of the supply voltage value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.17 |
ocnHistPMSupplyVoltageValidityIndicates the validity of the provided supply voltage value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.18 |
ocnHistPMLBCValueThe laser bias current measured on the OC-N facility port.ro INTEGER (-32768..32767) UNITS "mAmp" .1.3.6.1.4.1.18070.2.2.1.6.9.1.19 |
ocnHistPMLBCTimeStampThe date and time stamp of the laser bias current value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.20 |
ocnHistPMLBCValidityIndicates the validity of the provided laser bias current
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.21 |
ocnHistPMCVSValueThe count of coding violations at the section layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.9.1.22 |
ocnHistPMCVSTimeStampThe date and time stamp of the section layer coding violations
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.23 |
ocnHistPMCVSValidityIndicates the validity of the provided section layer coding
violations value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.24 |
ocnHistPMESSValueThe count of errored seconds at the section layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.9.1.25 |
ocnHistPMESSTimeStampThe date and time stamp of the section layer errored seconds
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.26 |
ocnHistPMESSValidityIndicates the validity of the provided section layer errored
seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.27 |
ocnHistPMSESSValueThe count of severely errored seconds at the section layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.9.1.28 |
ocnHistPMSESSTimeStampThe date and time stamp of the section layer severely errored
seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.29 |
ocnHistPMSESSValidityIndicates the validity of the provided section layer severely
errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.30 |
ocnHistPMSEFSSValueThe count of severely errored framing seconds at the section
layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.9.1.31 |
ocnHistPMSEFSSTimeStampThe date and time stamp of the section layer severely errored
framing seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.32 |
ocnHistPMSEFSSValidityIndicates the validity of the provided section layer severely
errored framing seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.33 |
ocnHistPMSupplyVoltage2ValueThe value of the second supply voltage source measured on the
OC-N facility port transceiver.ro FixedX10 UNITS "mVolts/10" .1.3.6.1.4.1.18070.2.2.1.6.9.1.34 |
ocnHistPMSupplyVoltage2TimeStampThe date and time stamp of the second supply voltage value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.35 |
ocnHistPMSupplyVoltage2ValidityIndicates the validity of the provided second supply voltage
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.36 |
ocnHistPMCVLValueThe count of coding violations at the line layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.9.1.37 |
ocnHistPMCVLTimeStampThe date and time stamp of the line layer coding violations
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.38 |
ocnHistPMCVLValidityIndicates the validity of the provided line layer coding
violations value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.39 |
ocnHistPMESLValueThe count of errored seconds at the line layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.9.1.40 |
ocnHistPMESLTimeStampThe date and time stamp of the line layer errored seconds
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.41 |
ocnHistPMESLValidityIndicates the validity of the provided line layer errored
seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.42 |
ocnHistPMSESLValueThe count of severely errored seconds at the line layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.9.1.43 |
ocnHistPMSESLTimeStampThe date and time stamp of the line layer severely errored
seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.44 |
ocnHistPMSESLValidityIndicates the validity of the provided line layer severely
errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.45 |
ocnHistPMUASLValueThe count of unavailable seconds at the line layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.9.1.46 |
ocnHistPMUASLTimeStampThe date and time stamp of the line layer unavailable seconds
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.47 |
ocnHistPMUASLValidityIndicates the validity of the provided line layer unavailable
seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.48 |
ocnHistPMOTUEBValueThe count of OTU digital wrapper layer errored blocks.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.9.1.49 |
ocnHistPMOTUEBTimeStampThe date and time stamp of the OTU digital wrapper layer
errored blocks value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.50 |
ocnHistPMOTUEBValidityIndicates the validity of the provided OTU digital wrapper
layer errored blocks value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.51 |
ocnHistPMOTUBBEValueThe count of OTU digital wrapper layer background block
errors.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.9.1.52 |
ocnHistPMOTUBBETimeStampThe date and time stamp of the OTU digital wrapper layer
background block errors value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.53 |
ocnHistPMOTUBBEValidityIndicates the validity of the provided OTU digital wrapper
layer background block errors value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.54 |
ocnHistPMOTUESValueThe count of OTU digital wrapper layer errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.9.1.55 |
ocnHistPMOTUESTimeStampThe date and time stamp of the OTU digital wrapper layer
errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.56 |
ocnHistPMOTUESValidityIndicates the validity of the provided OTU digital wrapper
layer errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.57 |
ocnHistPMOTUSESValueThe count of OTU digital wrapper layer severely errored
seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.9.1.58 |
ocnHistPMOTUSESTimeStampThe date and time stamp of the OTU digital wrapper layer
severely errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.59 |
ocnHistPMOTUSESValidityIndicates the validity of the provided OTU digital wrapper
layer severely errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.60 |
ocnHistPMOTUOFSValueThe count of OTU digital wrapper layer out-of-frame seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.9.1.61 |
ocnHistPMOTUOFSTimeStampThe date and time stamp of the OTU digital wrapper layer
out-of-frame seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.62 |
ocnHistPMOTUOFSValidityIndicates the validity of the provided OTU digital wrapper
layer out-of-frame seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.63 |
ocnHistPMNBITCRValueThe count of the number of bits corrected. This object applies
only to OC-192 line port provisioned for OTN line mapping.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.9.1.64 |
ocnHistPMNBITCRTimeStampThe date and time stamp of the number of bits corrected
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.65 |
ocnHistPMNBITCRValidityIndicates the validity of the provided number of bits
corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.66 |
ocnHistPMNBYTCRValueThe count of the number of bytes corrected. This object
applies only to OC-192 line port provisioned for OTN line
mapping.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.9.1.67 |
ocnHistPMNBYTCRTimeStampThe date and time stamp of the number of bytes corrected
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.68 |
ocnHistPMNBYTCRValidityIndicates the validity of the provided number of bytes
corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.69 |
ocnHistPMUNCRCDWValueThe count of uncorrectable codewords. This object applies only
to OC-192 line port provisioned for OTN line mapping.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.9.1.70 |
ocnHistPMUNCRCDWTimeStampThe date and time stamp of the uncorrectable codewords value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.71 |
ocnHistPMUNCRCDWValidityIndicates the validity of the provided uncorrectable codewords
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.72 |
ocnHistPMCVSInitializeUsed to initialize the value of the ocnHistPMCVSValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.9.1.73 |
ocnHistPMESSInitializeUsed to initialize the value of the ocnHistPMESSValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.9.1.74 |
ocnHistPMSESSInitializeUsed to initialize the value of the ocnHistPMSESSValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.9.1.75 |
ocnHistPMSEFSSInitializeUsed to initialize the value of the ocnHistPMSEFSSValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.9.1.76 |
ocnHistPMCVLInitializeUsed to initialize the value of the ocnHistPMCVLValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.9.1.77 |
ocnHistPMESLInitializeUsed to initialize the value of the ocnHistPMESLValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.9.1.78 |
ocnHistPMSESLInitializeUsed to initialize the value of the ocnHistPMSESLValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.9.1.79 |
ocnHistPMUASLInitializeUsed to initialize the value of the ocnHistPMUASLValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.9.1.80 |
ocnHistPMOTUEBInitializeUsed to initialize the value of the ocnHistPMOTUEBValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.9.1.81 |
ocnHistPMOTUBBEInitializeUsed to initialize the value of the ocnHistPMOTUBBEValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.9.1.82 |
ocnHistPMOTUESInitializeUsed to initialize the value of the ocnHistPMOTUESValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.9.1.83 |
ocnHistPMOTUSESInitializeUsed to initialize the value of the ocnHistPMOTUSESValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.9.1.84 |
ocnHistPMOTUOFSInitializeUsed to initialize the value of the ocnHistPMOTUOFSValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.9.1.85 |
ocnHistPMNBITCRInitializeUsed to initialize the value of the ocnHistPMNBITCRValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.9.1.86 |
ocnHistPMNBYTCRInitializeUsed to initialize the value of the ocnHistPMNBYTCRValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.9.1.87 |
ocnHistPMUNCRCDWInitializeUsed to initialize the value of the ocnHistPMUNCRCDWValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.9.1.88 |
ocnHistPMOTNBERValueThe instantaneous BER of OC-192 line port provisioned for OTN line mapping.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.89 |
ocnHistPMOTNBERTimeStampThe date and time stamp of the instantaneous BER.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.90 |
ocnHistPMOTNBERValidityIndicates the validity of the provided instantaneous BER.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.91 |
ocnHistPMOTNBERInitializeUsed to initialize the value of the ocnHistPMOTNBERValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.9.1.92 |
ocnHistPMOTNAVGBERValueThe interval/average BER of OC-192 line port provisioned for OTN line mapping.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.93 |
ocnHistPMOTNAVGBERTimeStampThe date and time stamp of the interval/average BER.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.94 |
ocnHistPMOTNAVGBERValidityIndicates the validity of the provided interval/average BER.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.95 |
ocnHistPMOTNAVGBERInitializeUsed to initialize the value of the ocnHistPMOTNAVGBERValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.9.1.96 |
ocnHistPMNBITCR64BitValueThe 64-bit count of the number of bits corrected. This object
applies only to OC-192 line port provisioned for OTN line mapping.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.9.1.97 |
ocnHistPMNBITCR64BitTimeStampThe date and time stamp of the 64-bit number of bits corrected
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.98 |
ocnHistPMNBITCR64BitValidityIndicates the validity of the provided 64-bit number of bits
corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.99 |
ocnHistPMNBITCR64BitInitializeUsed to initialize the value of the ocnHistPMNBITCR64BitValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.9.1.100 |
ocnHistPMNBYTCR64BitValueThe 64-bit count of the number of bytes corrected. This object
applies only to OC-192 line port provisioned for OTN line
mapping.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.9.1.101 |
ocnHistPMNBYTCR64BitTimeStampThe date and time stamp of the 64-bit number of bytes corrected
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.102 |
ocnHistPMNBYTCR64BitValidityIndicates the validity of the provided 64-bit number of bytes
corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.103 |
ocnHistPMNBYTCR64BitInitializeUsed to initialize the value of the ocnHistPMNBYTCR64BitValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.9.1.104 |
ocnHistPMUASSValueThe count of unavailable seconds at the section layer.
This object applies only to OC-192 line port provisioned
for OTN line mapping.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.9.1.105 |
ocnHistPMUASSTimeStampThe date and time stamp of the unavailable seconds at the section layer.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.106 |
ocnHistPMUASSValidityIndicates the validity of the unavailable seconds at the section layer.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.107 |
ocnHistPMUASSInitializeUsed to initialize the value of the ocnHistPMUASSValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.9.1.108 |
ocnHistPMOTUUASValueThe count of OTU digital wrapper layer unavailable seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.9.1.109 |
ocnHistPMOTUUASTimeStampThe date and time stamp of the OTU digital wrapper layer
unavailable seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.110 |
ocnHistPMOTUUASValidityIndicates the validity of the provided OTU digital wrapper
layer unavailable seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.111 |
ocnHistPMOTUUASInitializeUsed to initialize the value of the ocnHistPMOTUUASValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.9.1.112 |
ocnHistPMOPRMinValueThe minimum optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.9.1.113 |
ocnHistPMOPRMinTimeStampThe date and time stamp of the minimum optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.114 |
ocnHistPMOPRMinValidityIndicates the validity of the provided minimum optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.115 |
ocnHistPMOPRMinInitializeUsed to initialize the value of the ocnHistPMOPRMinValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.9.1.116 |
ocnHistPMOPRMaxValueThe maximum optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.9.1.117 |
ocnHistPMOPRMaxTimeStampThe date and time stamp of the maximum optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.118 |
ocnHistPMOPRMaxValidityIndicates the validity of the provided maximum optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.119 |
ocnHistPMOPRMaxInitializeUsed to initialize the value of the ocnHistPMOPRMaxValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.9.1.120 |
ocnHistPMOPRAvgValueThe average optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.9.1.121 |
ocnHistPMOPRAvgTimeStampThe date and time stamp of the average optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.122 |
ocnHistPMOPRAvgValidityIndicates the validity of the provided average optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.123 |
ocnHistPMOPRAvgInitializeUsed to initialize the value of the ocnHistPMOPRAvgValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.9.1.124 |
ocnHistPMOPTMinValueThe minimum optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.9.1.125 |
ocnHistPMOPTMinTimeStampThe date and time stamp of the minimum optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.126 |
ocnHistPMOPTMinValidityIndicates the validity of the provided minimum optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.127 |
ocnHistPMOPTMinInitializeUsed to initialize the value of the ocnHistPMOPTMinValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.9.1.128 |
ocnHistPMOPTMaxValueThe maximum optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.9.1.129 |
ocnHistPMOPTMaxTimeStampThe date and time stamp of the maximum optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.130 |
ocnHistPMOPTMaxValidityIndicates the validity of the provided maximum optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.131 |
ocnHistPMOPTMaxInitializeUsed to initialize the value of the ocnHistPMOPTMaxValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.9.1.132 |
ocnHistPMOPTAvgValueThe average optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.9.1.133 |
ocnHistPMOPTAvgTimeStampThe date and time stamp of the average optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.9.1.134 |
ocnHistPMOPTAvgValidityIndicates the validity of the provided average optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.9.1.135 |
ocnHistPMOPTAvgInitializeUsed to initialize the value of the ocnHistPMOPTAvgValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.9.1.136 |
ocnPMThresholdTableA table of threshold levels for performance monitoring counter
values on SONET OC-N facilities, that are used in the
generation of threshold crossing alerts. SEQUENCE OF OcnPMThresholdEntry .1.3.6.1.4.1.18070.2.2.1.6.10 |
ocnPMThresholdEntryThe row entry object of the SONET OC-N performance monitoring
threshold table. Each row of this table contains a set of PM
thresholds for a given interval type that applies to an
individual OC-N facility. OcnPMThresholdEntry .1.3.6.1.4.1.18070.2.2.1.6.10.1 |
ocnPMThresholdTypeIdxThe type of the OC-N facility targeted for PM thresholds. OcnType .1.3.6.1.4.1.18070.2.2.1.6.10.1.1 |
ocnPMThresholdShelfIdxThe shelf number on which the OC-N facility targeted for PM
thresholds is provisioned. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.10.1.2 |
ocnPMThresholdSlotIdxThe slot number on which the OC-N facility targeted for PM
thresholds is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.10.1.3 |
ocnPMThresholdPortIdxThe number of the port on the circuit pack on which the OC-N
facility targeted for PM thresholds is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.10.1.4 |
ocnPMThresholdIntervalTypeIdxThe type of PM bin according to interval length. Thresholds
are supported for the 15-minute and 1-day PM bins only. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.10.1.5 |
ocnPMThresholdCVSValueThe threshold for the count of coding violations at the
section layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.10.1.6 |
ocnPMThresholdESSValueThe threshold for the count of errored seconds at the section
layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.10.1.7 |
ocnPMThresholdSESSValueThe threshold fro the count of severely errored seconds at the
section layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.10.1.8 |
ocnPMThresholdSEFSSValueThe threshold for the count of severely errored framing
seconds at the section layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.10.1.9 |
ocnPMThresholdCVLValueThe threshold for the count of coding violations at the line
layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.10.1.10 |
ocnPMThresholdESLValueThe threshold for the count of errored seconds at the line
layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.10.1.11 |
ocnPMThresholdSESLValueThe threshold for the count of severely errored seconds at the
line layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.10.1.12 |
ocnPMThresholdUASLValueThe threshold for the count of unavailable seconds at the line
layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.10.1.13 |
ocnPMThresholdOTUEBValueThe threshold for the count of errored blocks at the OTU
digital wrapper layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.10.1.14 |
ocnPMThresholdOTUBBEValueThe threshold for the count of background block errors at the
OTU digital wrapper layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.10.1.15 |
ocnPMThresholdOTUESValueThe threshold for the count of errored seconds at the OTU
digital wrapper layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.10.1.16 |
ocnPMThresholdOTUSESValueThe threshold for the count of severely errored seconds at the
OTU digital wrapper layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.10.1.17 |
ocnPMThresholdOTUOFSValueThe threshold for the count of out-of-frame seconds at the OTU
digital wrapper layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.10.1.18 |
ocnPMThresholdUNCRCDWValueThe threshold for the count of uncorrectable codewords.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.10.1.21 |
ocnPMThresholdUASSValueThe threshold for the count of unavailable seconds at the
section layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.10.1.22 |
ocnPMThresholdOTUUASValueThe threshold for the count of unavailable seconds at the
OTU digital wrapper layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.10.1.23 |
stsnCrntPMTableA table of current performance monitoring statistics collected
for the SONET STS-N facilities on the NE. SEQUENCE OF StsnCrntPMEntry .1.3.6.1.4.1.18070.2.2.1.6.11 |
stsnCrntPMEntryThe row entry object of the SONET STS-N current performance
monitoring table. Each row of this table contains a full set
of PM statistics and related data for a current measurement
interval for a given STS-N facility. StsnCrntPMEntry .1.3.6.1.4.1.18070.2.2.1.6.11.1 |
stsnCrntPMTypeIdxThe type of STS-N facility targeted for PMs. StsnType .1.3.6.1.4.1.18070.2.2.1.6.11.1.1 |
stsnCrntPMShelfIdxThe number of the shelf of the STS-N facility targeted for
PMs. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.11.1.2 |
stsnCrntPMSlotIdxThe number of the slot of the STS-N facility targeted for
PMs. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.11.1.3 |
stsnCrntPMPortIdxThe number of the port on the circuit pack of the STS-N
facility targeted for PMs. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.11.1.4 |
stsnCrntPMIdxThe sts index number of the STS-N facility targeted for PMs. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.11.1.5 |
stsnCrntPMIntervalTypeIdxThe type of PM bin according to interval length. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.11.1.6 |
stsnCrntPMCVPValueThe count of coding violations at the path layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.11.1.7 |
stsnCrntPMCVPTimeStampThe date and time stamp of the path layer coding violations
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.11.1.8 |
stsnCrntPMCVPValidityIndicates the validity of the provided path layer coding
violations value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.11.1.9 |
stsnCrntPMESPValueThe count of errored seconds at the path layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.11.1.10 |
stsnCrntPMESPTimeStampThe date and time stamp of the path layer errored seconds
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.11.1.11 |
stsnCrntPMESPValidityIndicates the validity of the provided path layer errored
seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.11.1.12 |
stsnCrntPMSESPValueThe count of severely errored seconds at the path layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.11.1.13 |
stsnCrntPMSESPTimeStampThe date and time stamp of the path layer severely errored
seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.11.1.14 |
stsnCrntPMSESPValidityIndicates the validity of the provided path layer severely
errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.11.1.15 |
stsnCrntPMUASPValueThe count of unavailable seconds at the path layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.11.1.16 |
stsnCrntPMUASPTimeStampThe date and time stamp of the path layer unavailable seconds
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.11.1.17 |
stsnCrntPMUASPValidityIndicates the validity of the provided path layer unavailable
seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.11.1.18 |
stsnCrntPMFCPValueThe failure count at the path layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.11.1.19 |
stsnCrntPMFCPTimeStampThe date and time stamp of the path layer failure count
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.11.1.20 |
stsnCrntPMFCPValidityIndicates the validity of the provided path layer failure
count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.11.1.21 |
stsnCrntPMCVPInitializeUsed to initialize the value of the stsnCrntPMCVPValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.11.1.22 |
stsnCrntPMESPInitializeUsed to initialize the value of the stsnCrntPMESPValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.11.1.23 |
stsnCrntPMSESPInitializeUsed to initialize the value of the stsnCrntPMSESPValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.11.1.24 |
stsnCrntPMUASPInitializeUsed to initialize the value of the stsnCrntPMUASPValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.11.1.25 |
stsnCrntPMFCPInitializeUsed to initialize the value of the stsnCrntPMFCPValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.11.1.26 |
stsnHistPMTableA table of historical performance monitoring statistics
collected for the SONET STS-N facilities on the NE. SEQUENCE OF StsnHistPMEntry .1.3.6.1.4.1.18070.2.2.1.6.12 |
stsnHistPMEntryThe row entry object of the SONET STS-N historical performance
monitoring table. Each row of this table contains a full set
of PM statistics and related data for a historical measurement
interval for a given STS-N facility. StsnHistPMEntry .1.3.6.1.4.1.18070.2.2.1.6.12.1 |
stsnHistPMTypeIdxThe type of the STS-N facility targeted for PMs. StsnType .1.3.6.1.4.1.18070.2.2.1.6.12.1.1 |
stsnHistPMShelfIdxThe number of the shelf of the STS-N facility targeted for
PMs. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.12.1.2 |
stsnHistPMSlotIdxThe number of the slot of the STS-N facility targeted for
PMs. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.12.1.3 |
stsnHistPMPortIdxThe number of the port on the circuit pack of the STS-N
facility targeted for PMs. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.12.1.4 |
stsnHistPMIdxThe sts index number of the STS-N facility targeted for PMs. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.12.1.5 |
stsnHistPMIntervalTypeIdxThe type of PM bin according to interval length. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.12.1.6 |
stsnHistPMIntervalIdxThe specific PM bin number. The range is 1 to 96 for the
15-minute historical bins. For the 1-day historical bin, the
value is 1. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.12.1.7 |
stsnHistPMCVPValueThe count of coding violations at the path layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.12.1.8 |
stsnHistPMCVPTimeStampThe date and time stamp of the path layer coding violations
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.12.1.9 |
stsnHistPMCVPValidityIndicates the validity of the provided path layer coding
violations value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.12.1.10 |
stsnHistPMESPValueThe count of errored seconds at the path layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.12.1.11 |
stsnHistPMESPTimeStampThe date and time stamp of the path layer errored seconds
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.12.1.12 |
stsnHistPMESPValidityIndicates the validity of the provided path layer errored
seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.12.1.13 |
stsnHistPMSESPValueThe count of severely errored seconds at the path layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.12.1.14 |
stsnHistPMSESPTimeStampThe date and time stamp of the path layer severely errored
seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.12.1.15 |
stsnHistPMSESPValidityIndicates the validity of the provided path layer severely
errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.12.1.16 |
stsnHistPMUASPValueThe count of unavailable seconds at the path layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.12.1.17 |
stsnHistPMUASPTimeStampThe date and time stamp of the path layer unavailable seconds
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.12.1.18 |
stsnHistPMUASPValidityIndicates the validity of the provided path layer unavailable
seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.12.1.19 |
stsnHistPMFCPValueThe failure count at the path layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.12.1.20 |
stsnHistPMFCPTimeStampThe date and time stamp of the path layer failure count.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.12.1.21 |
stsnHistPMFCPValidityIndicates the validity of the provided path layer failure
count.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.12.1.22 |
stsnHistPMCVPInitializeUsed to initialize the value of the stsnHistPMCVPValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.12.1.23 |
stsnHistPMESPInitializeUsed to initialize the value of the stsnHistPMESPValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.12.1.24 |
stsnHistPMSESPInitializeUsed to initialize the value of the stsnHistPMSESPValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.12.1.25 |
stsnHistPMUASPInitializeUsed to initialize the value of the stsnHistPMUASPValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.12.1.26 |
stsnHistPMFCPInitializeUsed to initialize the value of the stsnHistPMFCPValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.12.1.27 |
stsnPMThresholdByPortTableA table of threshold levels for performance monitoring counter
values on SONET STS-N facilities, that are used in the
generation of threshold crossing alerts. The STS-N threshold
settings will be the same for all STS channels on a given OC-N
facility port. SEQUENCE OF StsnPMThresholdByPortEntry .1.3.6.1.4.1.18070.2.2.1.6.13 |
stsnPMThresholdByPortEntryThe row entry object of the SONET STS-N performance monitoring
threshold by port table. Each row of this table contains a set
of PM thresholds for a given interval type that applies to all
the STS-N channels on an OC-N facility port. StsnPMThresholdByPortEntry .1.3.6.1.4.1.18070.2.2.1.6.13.1 |
stsnPMThresholdByPortTypeIdxThe type of the STS-N facilities targeted for PM thresholds. StsnType .1.3.6.1.4.1.18070.2.2.1.6.13.1.1 |
stsnPMThresholdByPortShelfIdxThe shelf number of the STS-N facilities targeted for PM
thresholds. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.13.1.2 |
stsnPMThresholdByPortSlotIdxThe slot number of the STS-N facilities targeted for PM
thresholds. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.13.1.3 |
stsnPMThresholdByPortIdxThe number of the port on the circuit pack of the STS-N
facilities targeted for PM thresholds. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.13.1.4 |
stsnPMThresholdByPortIntervalTypeIdxThe type of PM bin according to interval length. Thresholds
are supported for the 15-minute and 1-day PM bins only. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.13.1.5 |
stsnPMThresholdByPortCVPValueThe threshold for the count of coding violations at the path
layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.13.1.6 |
stsnPMThresholdByPortESPValueThe threshold for the count of errored seconds at the path
layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.13.1.9 |
stsnPMThresholdByPortSESPValueThe threshold for the count of severely errored seconds at the
path layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.13.1.10 |
stsnPMThresholdByPortUASPValueThe threshold for the count of unavailable seconds at the path
layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.13.1.11 |
stsnPMThresholdByPortFCPValueThe threshold for the failure count at the path layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.13.1.12 |
stmnCrntPMTableA table of current performance monitoring statistics collected
for the SDH STM-N facilities on the NE. SEQUENCE OF StmnCrntPMEntry .1.3.6.1.4.1.18070.2.2.1.6.14 |
stmnCrntPMEntryThe row entry object of the SDH STM-N current performance
monitoring table. Each row of this table contains a full set
of PM statistics and related data for a current measurement
interval for a given STM-N facility. StmnCrntPMEntry .1.3.6.1.4.1.18070.2.2.1.6.14.1 |
stmnCrntPMTypeIdxThe type of STM-N facility targeted for PMs. StmnType .1.3.6.1.4.1.18070.2.2.1.6.14.1.1 |
stmnCrntPMShelfIdxThe number of the shelf on which the STM-N facility targeted
for PMs is provisioned. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.14.1.2 |
stmnCrntPMSlotIdxThe number of the slot within which the STM-N facility
targeted for PMs is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.14.1.3 |
stmnCrntPMPortIdxThe number of the port on the circuit pack on which the STM-N
facility targeted for PMs is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.14.1.4 |
stmnCrntPMIntervalTypeIdxThe type of PM bin according to interval length. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.14.1.5 |
stmnCrntPMOPRValueThe optical power received on the input of the OC-N facility
port.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.14.1.6 |
stmnCrntPMOPRTimeStampThe date and time stamp of the optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.7 |
stmnCrntPMOPRValidityIndicates the validity of the provided optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.8 |
stmnCrntPMOPTValueThe optical power transmitted at the output of the STM-N
facility port.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.14.1.9 |
stmnCrntPMOPTTimeStampThe date and time stamp of the optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.10 |
stmnCrntPMOPTValidityIndicates the validity of the provided optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.11 |
stmnCrntPMTempValueThe temperature measured on the STM-N facility port.ro INTEGER (-32768..32767) UNITS "degrees Celsius" .1.3.6.1.4.1.18070.2.2.1.6.14.1.12 |
stmnCrntPMTempTimeStampThe date and time stamp of the temperature value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.13 |
stmnCrntPMTempValidityIndicates the validity of the provided temperature value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.14 |
stmnCrntPMSupplyVoltageValueThe supply voltage measured on the STM-N facility port.ro FixedX10 UNITS "mVolts/10" .1.3.6.1.4.1.18070.2.2.1.6.14.1.15 |
stmnCrntPMSupplyVoltageTimeStampThe date and time stamp of the supply voltage value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.16 |
stmnCrntPMSupplyVoltageValidityIndicates the validity of the provided supply voltage value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.17 |
stmnCrntPMLBCValueThe laser bias current measured on the STM-N facility port.ro INTEGER (-32768..32767) UNITS "mAmp" .1.3.6.1.4.1.18070.2.2.1.6.14.1.18 |
stmnCrntPMLBCTimeStampThe date and time stamp of the laser bias current value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.19 |
stmnCrntPMLBCValidityIndicates the validity of the provided laser bias current
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.20 |
stmnCrntPMRSEBValueThe count of regenerator section errored blocks.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.14.1.21 |
stmnCrntPMRSEBTimeStampThe date and time stamp of the regenerator section errored
blocks value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.22 |
stmnCrntPMRSEBValidityIndicates the validity of the provided regenerator section
errored blocks value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.23 |
stmnCrntPMRSBBEValueThe count of regenerator section background block errors.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.14.1.24 |
stmnCrntPMRSBBETimeStampThe date and time stamp of the regenerator section background
block errors value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.25 |
stmnCrntPMRSBBEValidityIndicates the validity of the provided regenerator section
background block errors value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.26 |
stmnCrntPMRSESValueThe count of regenerator section errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.14.1.27 |
stmnCrntPMRSESTimeStampThe date and time stamp of the regenerator section errored
seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.28 |
stmnCrntPMRSESValidityIndicates the validity of the provided regenerator section
errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.29 |
stmnCrntPMRSSESValueThe count of regenerator section severely errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.14.1.30 |
stmnCrntPMRSSESTimeStampThe date and time stamp of the regenerator section severely
errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.31 |
stmnCrntPMRSSESValidityIndicates the validity of the provided regenerator section
severely errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.32 |
stmnCrntPMRSOFSValueThe count of regenerator section out-of-frame seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.14.1.33 |
stmnCrntPMRSOFSTimeStampThe date and time stamp of the regenerator section
out-of-frame seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.34 |
stmnCrntPMRSOFSValidityIndicates the validity of the provided regenerator section
out-of-frame seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.35 |
stmnCrntPMSupplyVoltage2ValueThe value of the second supply voltage source measured on the
STM-N facility port transceiver.ro FixedX10 UNITS "mVolts/10" .1.3.6.1.4.1.18070.2.2.1.6.14.1.36 |
stmnCrntPMSupplyVoltage2TimeStampThe date and time stamp of the second supply voltage value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.37 |
stmnCrntPMSupplyVoltage2ValidityIndicates the validity of the provided second supply voltage
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.38 |
stmnCrntPMMSEBValueThe count of multiplex section errored blocks.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.14.1.39 |
stmnCrntPMMSEBTimeStampThe date and time stamp of the multiplex section errored
blocks value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.40 |
stmnCrntPMMSEBValidityIndicates the validity of the provided multiplex section
errored blocks value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.41 |
stmnCrntPMMSBBEValueThe count of multiplex section background block errors.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.14.1.42 |
stmnCrntPMMSBBETimeStampThe date and time stamp of the multiplex section background
block errors value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.43 |
stmnCrntPMMSBBEValidityIndicates the validity of the provided multiplex section
background block errors value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.44 |
stmnCrntPMMSESValueThe count of multiplex section errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.14.1.45 |
stmnCrntPMMSESTimeStampThe date and time stamp of the multiplex section errored
seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.46 |
stmnCrntPMMSESValidityIndicates the validity of the provided multiplex section
errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.47 |
stmnCrntPMMSSESValueThe count of multiplex section severely errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.14.1.48 |
stmnCrntPMMSSESTimeStampThe date and time stamp of the multiplex section severely
errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.49 |
stmnCrntPMMSSESValidityIndicates the validity of the provided multiplex section
severely errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.50 |
stmnCrntPMMSUASValueThe count of multiplex section unavailable seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.14.1.51 |
stmnCrntPMMSUASTimeStampThe date and time stamp of the multiplex section unavailable
seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.52 |
stmnCrntPMMSUASValidityIndicates the validity of the provided multiplex section
unavailable seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.53 |
stmnCrntPMOTUEBValueThe count of OTU digital wrapper layer errored blocks.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.14.1.54 |
stmnCrntPMOTUEBTimeStampThe date and time stamp of the OTU digital wrapper layer
errored blocks value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.55 |
stmnCrntPMOTUEBValidityIndicates the validity of the provided OTU digital wrapper
layer errored blocks value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.56 |
stmnCrntPMOTUBBEValueThe count of OTU digital wrapper layer background block
errors.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.14.1.57 |
stmnCrntPMOTUBBETimeStampThe date and time stamp of the OTU digital wrapper layer
background block errors value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.58 |
stmnCrntPMOTUBBEValidityIndicates the validity of the provided OTU digital wrapper
layer background block errors value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.59 |
stmnCrntPMOTUESValueThe count of OTU digital wrapper layer errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.14.1.60 |
stmnCrntPMOTUESTimeStampThe date and time stamp of the OTU digital wrapper layer
errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.61 |
stmnCrntPMOTUESValidityIndicates the validity of the provided OTU digital wrapper
layer errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.62 |
stmnCrntPMOTUSESValueThe count of OTU digital wrapper layer severely errored
seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.14.1.63 |
stmnCrntPMOTUSESTimeStampThe date and time stamp of the OTU digital wrapper layer
severely errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.64 |
stmnCrntPMOTUSESValidityIndicates the validity of the provided OTU digital wrapper
layer severely errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.65 |
stmnCrntPMOTUOFSValueThe count of OTU digital wrapper layer out-of-frame seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.14.1.66 |
stmnCrntPMOTUOFSTimeStampThe date and time stamp of the OTU digital wrapper layer
out-of-frame seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.67 |
stmnCrntPMOTUOFSValidityIndicates the validity of the provided OTU digital wrapper
layer severely errored framing seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.68 |
stmnCrntPMNBITCRValueThe count of the number of bits corrected. This object applies
only to STM-64 line port provisioned for OTN line mapping.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.14.1.69 |
stmnCrntPMNBITCRTimeStampThe date and time stamp of the number of bits corrected
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.70 |
stmnCrntPMNBITCRValidityIndicates the validity of the provided number of bits
corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.71 |
stmnCrntPMNBYTCRValueThe count of the number of bytes corrected. This object
applies only to STM-64 line port provisioned for OTN line
mapping.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.14.1.72 |
stmnCrntPMNBYTCRTimeStampThe date and time stamp of the number of bytes corrected
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.73 |
stmnCrntPMNBYTCRValidityIndicates the validity of the provided number of bytes
corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.74 |
stmnCrntPMUNCRCDWValueThe count of uncorrectable codewords. This object applies only
to STM-64 line port provisioned for OTN line mapping.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.14.1.75 |
stmnCrntPMUNCRCDWTimeStampThe date and time stamp of the uncorrectable codewords value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.76 |
stmnCrntPMUNCRCDWValidityIndicates the validity of the provided uncorrectable codewords
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.77 |
stmnCrntPMRSEBInitializeUsed to initialize the value of the stmnCrntPMRSEBValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.14.1.78 |
stmnCrntPMRSBBEInitializeUsed to initialize the value of the stmnCrntPMRSBBEValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.14.1.79 |
stmnCrntPMRSESInitializeUsed to initialize the value of the stmnCrntPMRSESValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.14.1.80 |
stmnCrntPMRSSESInitializeUsed to initialize the value of the stmnCrntPMRSSESValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.14.1.81 |
stmnCrntPMRSOFSInitializeUsed to initialize the value of the stmnCrntPMRSOFSValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.14.1.82 |
stmnCrntPMMSEBInitializeUsed to initialize the value of the stmnCrntPMMSEBValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.14.1.83 |
stmnCrntPMMSBBEInitializeUsed to initialize the value of the stmnCrntPMMSBBEValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.14.1.84 |
stmnCrntPMMSESInitializeUsed to initialize the value of the stmnCrntPMMSESValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.14.1.85 |
stmnCrntPMMSSESInitializeUsed to initialize the value of the stmnCrntPMMSSESValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.14.1.86 |
stmnCrntPMMSUASInitializeUsed to initialize the value of the stmnCrntPMMSUASValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.14.1.87 |
stmnCrntPMOTUEBInitializeUsed to initialize the value of the stmnCrntPMOTUEBValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.14.1.88 |
stmnCrntPMOTUBBEInitializeUsed to initialize the value of the stmnCrntPMOTUBBEValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.14.1.89 |
stmnCrntPMOTUESInitializeUsed to initialize the value of the stmnCrntPMOTUESValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.14.1.90 |
stmnCrntPMOTUSESInitializeUsed to initialize the value of the stmnCrntPMOTUSESValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.14.1.91 |
stmnCrntPMOTUOFSInitializeUsed to initialize the value of the stmnCrntPMOTUOFSValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.14.1.92 |
stmnCrntPMNBITCRInitializeUsed to initialize the value of the stmnCrntPMNBITCRValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.14.1.93 |
stmnCrntPMNBYTCRInitializeUsed to initialize the value of the stmnCrntPMNBYTCRValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.14.1.94 |
stmnCrntPMUNCRCDWInitializeUsed to initialize the value of the stmnCrntPMUNCRCDWValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.14.1.95 |
stmnCrntPMOTNBERValueThe instantaneous BER of STM-64 line port provisioned for OTN line mapping.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.96 |
stmnCrntPMOTNBERTimeStampThe date and time stamp of the instantaneous BER.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.97 |
stmnCrntPMOTNBERValidityIndicates the validity of the provided instantaneous BER.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.98 |
stmnCrntPMOTNBERInitializeUsed to initialize the value of the stmnCrntPMOTNBERValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.14.1.99 |
stmnCrntPMOTNAVGBERValueThe interval/average BER of STM-64 line port provisioned for OTN line mapping.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.100 |
stmnCrntPMOTNAVGBERTimeStampThe date and time stamp of the interval/average BER.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.101 |
stmnCrntPMOTNAVGBERValidityIndicates the validity of the provided interval/average BER.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.102 |
stmnCrntPMOTNAVGBERInitializeUsed to initialize the value of the stmnCrntPMOTNAVGBERValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.14.1.103 |
stmnCrntPMNBITCR64BitValueThe 64-bit count of the number of bits corrected. This object applies
only to STM-64 line port provisioned for OTN line mapping.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.14.1.104 |
stmnCrntPMNBITCR64BitTimeStampThe date and time stamp of the 64-bit number of bits corrected
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.105 |
stmnCrntPMNBITCR64BitValidityIndicates the validity of the provided 64-bit number of bits
corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.106 |
stmnCrntPMNBITCR64BitInitializeUsed to initialize the value of the stmnCrntPMNBITCR64BitValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.14.1.107 |
stmnCrntPMNBYTCR64BitValueThe 64-bit count of the number of bytes corrected. This object
applies only to STM-64 line port provisioned for OTN line
mapping.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.14.1.108 |
stmnCrntPMNBYTCR64BitTimeStampThe date and time stamp of the 64-bit number of bytes corrected
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.109 |
stmnCrntPMNBYTCR64BitValidityIndicates the validity of the provided 64-bit number of bytes
corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.110 |
stmnCrntPMNBYTCR64BitInitializeUsed to initialize the value of the stmnCrntPMNBYTCR64BitValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.14.1.111 |
stmnCrntPMRSUASValueThe count of regenerator section unavailable seconds.
This object applies only to STM-64 line port provisioned
for OTN line mapping.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.14.1.112 |
stmnCrntPMRSUASTimeStampThe date and time stamp of the regenerator section
unavailable seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.113 |
stmnCrntPMRSUASValidityIndicates the validity of the provided regenerator section
unavailable seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.114 |
stmnCrntPMRSUASInitializeUsed to initialize the value of the stmnCrntPMRSUASValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.14.1.115 |
stmnCrntPMOTUUASValueThe count of OTU digital wrapper layer unavailable seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.14.1.116 |
stmnCrntPMOTUUASTimeStampThe date and time stamp of the OTU digital wrapper layer
unavailable seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.117 |
stmnCrntPMOTUUASValidityIndicates the validity of the provided OTU digital wrapper
layer unavailable seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.118 |
stmnCrntPMOTUUASInitializeUsed to initialize the value of the stmnCrntPMOTUUASValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.14.1.119 |
stmnCrntPMOPRMinValueThe minimum optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.14.1.120 |
stmnCrntPMOPRMinTimeStampThe date and time stamp of the minimum optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.121 |
stmnCrntPMOPRMinValidityIndicates the validity of the provided minimum optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.122 |
stmnCrntPMOPRMinInitializeUsed to initialize the value of the stmnCrntPMOPRMinValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.14.1.123 |
stmnCrntPMOPRMaxValueThe maximum optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.14.1.124 |
stmnCrntPMOPRMaxTimeStampThe date and time stamp of the maximum optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.125 |
stmnCrntPMOPRMaxValidityIndicates the validity of the provided maximum optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.126 |
stmnCrntPMOPRMaxInitializeUsed to initialize the value of the stmnCrntPMOPRMaxValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.14.1.127 |
stmnCrntPMOPRAvgValueThe average optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.14.1.128 |
stmnCrntPMOPRAvgTimeStampThe date and time stamp of the average optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.129 |
stmnCrntPMOPRAvgValidityIndicates the validity of the provided average optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.130 |
stmnCrntPMOPRAvgInitializeUsed to initialize the value of the stmnCrntPMOPRAvgValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.14.1.131 |
stmnCrntPMOPTMinValueThe minimum optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.14.1.132 |
stmnCrntPMOPTMinTimeStampThe date and time stamp of the minimum optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.133 |
stmnCrntPMOPTMinValidityIndicates the validity of the provided minimum optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.134 |
stmnCrntPMOPTMinInitializeUsed to initialize the value of the stmnCrntPMOPTMinValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.14.1.135 |
stmnCrntPMOPTMaxValueThe maximum optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.14.1.136 |
stmnCrntPMOPTMaxTimeStampThe date and time stamp of the maximum optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.137 |
stmnCrntPMOPTMaxValidityIndicates the validity of the provided maximum optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.138 |
stmnCrntPMOPTMaxInitializeUsed to initialize the value of the stmnCrntPMOPTMaxValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.14.1.139 |
stmnCrntPMOPTAvgValueThe average optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.14.1.140 |
stmnCrntPMOPTAvgTimeStampThe date and time stamp of the average optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.14.1.141 |
stmnCrntPMOPTAvgValidityIndicates the validity of the provided average optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.14.1.142 |
stmnCrntPMOPTAvgInitializeUsed to initialize the value of the stmnCrntPMOPTAvgValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.14.1.143 |
stmnHistPMTableA table of historical performance monitoring statistics
collected for the SDH STM-N facilities on the NE. SEQUENCE OF StmnHistPMEntry .1.3.6.1.4.1.18070.2.2.1.6.15 |
stmnHistPMEntryThe row entry object of the SDH STM-N historical performance
monitoring table. Each row of this table contains a full set
of PM statistics and related data for a historical measurement
interval for a given STM-N facility. StmnHistPMEntry .1.3.6.1.4.1.18070.2.2.1.6.15.1 |
stmnHistPMTypeIdxThe type of the STM-N facility targeted for PMs. StmnType .1.3.6.1.4.1.18070.2.2.1.6.15.1.1 |
stmnHistPMShelfIdxThe number of the shelf on which the STM-N facility targeted
for PMs is provisioned. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.15.1.2 |
stmnHistPMSlotIdxThe number of the slot within which the STM-N facility
targeted for PMs is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.15.1.3 |
stmnHistPMPortIdxThe number of the port on the circuit pack on which the STM-N
facility targeted for PMs is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.15.1.4 |
stmnHistPMIntervalTypeIdxThe type of PM bin according to interval length. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.15.1.5 |
stmnHistPMIntervalIdxThe specific PM bin number. The range is 1 to 96 for the
15-minute historical bins. For the 1-day historical bin, the
value is 1. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.15.1.6 |
stmnHistPMOPRValueThe optical power received on the input of the STM-N
facility.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.15.1.7 |
stmnHistPMOPRTimeStampThe date and time stamp of the optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.8 |
stmnHistPMOPRValidityIndicates the validity of the provided optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.9 |
stmnHistPMOPTValueThe optical power transmitted at the output of the STM-N
facility.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.15.1.10 |
stmnHistPMOPTTimeStampThe date and time stamp of the optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.11 |
stmnHistPMOPTValidityIndicates the validity of the provided optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.12 |
stmnHistPMTempValueThe temperature measured on the STM-N facility port.ro INTEGER (-32768..32767) UNITS "degrees Celsius" .1.3.6.1.4.1.18070.2.2.1.6.15.1.13 |
stmnHistPMTempTimeStampThe date and time stamp of the temperature value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.14 |
stmnHistPMTempValidityIndicates the validity of the provided temperature value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.15 |
stmnHistPMSupplyVoltageValueThe supply voltage measured on the STM-N facility port.ro FixedX10 UNITS "mVolts/10" .1.3.6.1.4.1.18070.2.2.1.6.15.1.16 |
stmnHistPMSupplyVoltageTimeStampThe date and time stamp of the supply voltage value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.17 |
stmnHistPMSupplyVoltageValidityIndicates the validity of the provided supply voltage value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.18 |
stmnHistPMLBCValueThe laser bias current measured on the STM-N facility port.ro INTEGER (-32768..32767) UNITS "mAmp" .1.3.6.1.4.1.18070.2.2.1.6.15.1.19 |
stmnHistPMLBCTimeStampThe date and time stamp of the laser bias current value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.20 |
stmnHistPMLBCValidityIndicates the validity of the provided laser bias current
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.21 |
stmnHistPMRSEBValueThe count of regenerator section errored blocks.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.15.1.22 |
stmnHistPMRSEBTimeStampThe date and time stamp of the regenerator section errored
blocks value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.23 |
stmnHistPMRSEBValidityIndicates the validity of the provided regenerator section
errored blocks value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.24 |
stmnHistPMRSBBEValueThe count of regenerator section background block errors.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.15.1.25 |
stmnHistPMRSBBETimeStampThe date and time stamp of the regenerator section background
block errors value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.26 |
stmnHistPMRSBBEValidityIndicates the validity of the provided regenerator section
background block errors value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.27 |
stmnHistPMRSESValueThe count of regenerator section errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.15.1.28 |
stmnHistPMRSESTimeStampThe date and time stamp of the regenerator section errored
seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.29 |
stmnHistPMRSESValidityIndicates the validity of the provided regenerator section
errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.30 |
stmnHistPMRSSESValueThe count of regenerator section severely errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.15.1.31 |
stmnHistPMRSSESTimeStampThe date and time stamp of the regenerator section severely
errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.32 |
stmnHistPMRSSESValidityIndicates the validity of the provided regenerator section
severely errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.33 |
stmnHistPMRSOFSValueThe count of regenerator section out-of-frame seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.15.1.34 |
stmnHistPMRSOFSTimeStampThe date and time stamp of the regenerator section
out-of-frame seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.35 |
stmnHistPMRSOFSValidityIndicates the validity of the provided regenerator section
out-of-frame seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.36 |
stmnHistPMSupplyVoltage2ValueThe value of the second supply voltage source measured on the
STM-N facility port transceiver.ro FixedX10 UNITS "mVolts/10" .1.3.6.1.4.1.18070.2.2.1.6.15.1.37 |
stmnHistPMSupplyVoltage2TimeStampThe date and time stamp of the second supply voltage value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.38 |
stmnHistPMSupplyVoltage2ValidityIndicates the validity of the provided second supply voltage
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.39 |
stmnHistPMMSEBValueThe count of multiplex section errored blocks.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.15.1.40 |
stmnHistPMMSEBTimeStampThe date and time stamp of the multiplex section errored
blocks value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.41 |
stmnHistPMMSEBValidityIndicates the validity of the provided multiplex section
errored blocks value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.42 |
stmnHistPMMSBBEValueThe count of multiplex section background block errors.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.15.1.43 |
stmnHistPMMSBBETimeStampThe date and time stamp of the multiplex section background
block errors value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.44 |
stmnHistPMMSBBEValidityIndicates the validity of the provided multiplex section
background block errors value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.45 |
stmnHistPMMSESValueThe count of multiplex section errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.15.1.46 |
stmnHistPMMSESTimeStampThe date and time stamp of the multiplex section errored
seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.47 |
stmnHistPMMSESValidityIndicates the validity of the provided multiplex section
errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.48 |
stmnHistPMMSSESValueThe count of multiplex section severely errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.15.1.49 |
stmnHistPMMSSESTimeStampThe date and time stamp of the multiplex section severely
errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.50 |
stmnHistPMMSSESValidityIndicates the validity of the provided multiplex section
severely errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.51 |
stmnHistPMMSUASValueThe count of multiplex section unavailable seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.15.1.52 |
stmnHistPMMSUASTimeStampThe date and time stamp of the multiplex section unavailable
seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.53 |
stmnHistPMMSUASValidityIndicates the validity of the provided multiplex section
unavailable seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.54 |
stmnHistPMOTUEBValueThe count of OTU digital wrapper layer errored blocks.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.15.1.55 |
stmnHistPMOTUEBTimeStampThe date and time stamp of the OTU digital wrapper layer
errored blocks value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.56 |
stmnHistPMOTUEBValidityIndicates the validity of the provided OTU digital wrapper
layer errored blocks value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.57 |
stmnHistPMOTUBBEValueThe count of OTU digital wrapper layer background block
errors.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.15.1.58 |
stmnHistPMOTUBBETimeStampThe date and time stamp of the OTU digital wrapper layer
background block errors value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.59 |
stmnHistPMOTUBBEValidityIndicates the validity of the provided OTU digital wrapper
layer background block errors value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.60 |
stmnHistPMOTUESValueThe count of OTU digital wrapper layer errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.15.1.61 |
stmnHistPMOTUESTimeStampThe date and time stamp of the OTU digital wrapper layer
errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.62 |
stmnHistPMOTUESValidityIndicates the validity of the provided OTU digital wrapper
layer errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.63 |
stmnHistPMOTUSESValueThe count of OTU digital wrapper layer severely errored
seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.15.1.64 |
stmnHistPMOTUSESTimeStampThe date and time stamp of the OTU digital wrapper layer
severely errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.65 |
stmnHistPMOTUSESValidityIndicates the validity of the provided OTU digital wrapper
layer severely errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.66 |
stmnHistPMOTUOFSValueThe count of OTU digital wrapper layer out-of-frame seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.15.1.67 |
stmnHistPMOTUOFSTimeStampThe date and time stamp of the OTU digital wrapper layer
out-of-frame seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.68 |
stmnHistPMOTUOFSValidityIndicates the validity of the provided OTU digital wrapper
layer severely errored framing seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.69 |
stmnHistPMNBITCRValueThe count of the number of bits corrected. This object applies
only to STM-64 line port provisioned for OTN line mapping.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.15.1.70 |
stmnHistPMNBITCRTimeStampThe date and time stamp of the number of bits corrected
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.71 |
stmnHistPMNBITCRValidityIndicates the validity of the provided number of bits
corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.72 |
stmnHistPMNBYTCRValueThe count of the number of bytes corrected. This object
applies only to STM-64 line port provisioned for OTN line
mapping.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.15.1.73 |
stmnHistPMNBYTCRTimeStampThe date and time stamp of the number of bytes corrected
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.74 |
stmnHistPMNBYTCRValidityIndicates the validity of the provided number of bytes
corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.75 |
stmnHistPMUNCRCDWValueThe count of uncorrectable codewords. This object applies only
to STM-64 line port provisioned for OTN line mapping.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.15.1.76 |
stmnHistPMUNCRCDWTimeStampThe date and time stamp of the uncorrectable codewords value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.77 |
stmnHistPMUNCRCDWValidityIndicates the validity of the provided uncorrectable codewords
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.78 |
stmnHistPMRSEBInitializeUsed to initialize the value of the stmnHistPMRSEBValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.15.1.79 |
stmnHistPMRSBBEInitializeUsed to initialize the value of the stmnHistPMRSBBEValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.15.1.80 |
stmnHistPMRSESInitializeUsed to initialize the value of the stmnHistPMRSESValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.15.1.81 |
stmnHistPMRSSESInitializeUsed to initialize the value of the stmnHistPMRSSESValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.15.1.82 |
stmnHistPMRSOFSInitializeUsed to initialize the value of the stmnHistPMRSOFSValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.15.1.83 |
stmnHistPMMSEBInitializeUsed to initialize the value of the stmnHistPMMSEBValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.15.1.84 |
stmnHistPMMSBBEInitializeUsed to initialize the value of the stmnHistPMMSBBEValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.15.1.85 |
stmnHistPMMSESInitializeUsed to initialize the value of the stmnHistPMMSESValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.15.1.86 |
stmnHistPMMSSESInitializeUsed to initialize the value of the stmnHistPMMSSESValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.15.1.87 |
stmnHistPMMSUASInitializeUsed to initialize the value of the stmnHistPMMSUASValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.15.1.88 |
stmnHistPMOTUEBInitializeUsed to initialize the value of the stmnHistPMOTUEBValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.15.1.89 |
stmnHistPMOTUBBEInitializeUsed to initialize the value of the stmnHistPMOTUBBEValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.15.1.90 |
stmnHistPMOTUESInitializeUsed to initialize the value of the stmnHistPMOTUESValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.15.1.91 |
stmnHistPMOTUSESInitializeUsed to initialize the value of the stmnHistPMOTUSESValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.15.1.92 |
stmnHistPMOTUOFSInitializeUsed to initialize the value of the stmnHistPMOTUOFSValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.15.1.93 |
stmnHistPMNBITCRInitializeUsed to initialize the value of the stmnHistPMNBITCRValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.15.1.94 |
stmnHistPMNBYTCRInitializeUsed to initialize the value of the stmnHistPMNBYTCRValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.15.1.95 |
stmnHistPMUNCRCDWInitializeUsed to initialize the value of the stmnHistPMUNCRCDWValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.15.1.96 |
stmnHistPMOTNBERValueThe instantaneous BER of STM-64 line port provisioned for OTN line mapping.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.97 |
stmnHistPMOTNBERTimeStampThe date and time stamp of the instantaneous BER.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.98 |
stmnHistPMOTNBERValidityIndicates the validity of the provided instantaneous BER.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.99 |
stmnHistPMOTNBERInitializeUsed to initialize the value of the stmnHistPMOTNBERValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.15.1.100 |
stmnHistPMOTNAVGBERValueThe interval/average BER of STM-64 line port provisioned for OTN line mapping.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.101 |
stmnHistPMOTNAVGBERTimeStampThe date and time stamp of the interval/average BER.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.102 |
stmnHistPMOTNAVGBERValidityIndicates the validity of the provided interval/average BER.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.103 |
stmnHistPMOTNAVGBERInitializeUsed to initialize the value of the stmnHistPMOTNAVGBERValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.15.1.104 |
stmnHistPMNBITCR64BitValueThe 64-bit count of the number of bits corrected. This object applies
only to STM-64 line port provisioned for OTN line mapping.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.15.1.105 |
stmnHistPMNBITCR64BitTimeStampThe date and time stamp of the 64-bit number of bits corrected
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.106 |
stmnHistPMNBITCR64BitValidityIndicates the validity of the provided 64-bit number of bits
corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.107 |
stmnHistPMNBITCR64BitInitializeUsed to initialize the value of the stmnCrntPMNBITCR64BitValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.15.1.108 |
stmnHistPMNBYTCR64BitValueThe 64-bit count of the number of bytes corrected. This object
applies only to STM-64 line port provisioned for OTN line
mapping.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.15.1.109 |
stmnHistPMNBYTCR64BitTimeStampThe date and time stamp of the 64-bit number of bytes corrected
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.110 |
stmnHistPMNBYTCR64BitValidityIndicates the validity of the provided 64-bit number of bytes
corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.111 |
stmnHistPMNBYTCR64BitInitializeUsed to initialize the value of the stmnCrntPMNBYTCR64BitValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.15.1.112 |
stmnHistPMRSUASValueThe count of regenerator section unavailable seconds.
This object applies only to STM-64 line port provisioned
for OTN line mapping.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.15.1.113 |
stmnHistPMRSUASTimeStampThe date and time stamp of the regenerator section
unavailable seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.114 |
stmnHistPMRSUASValidityIndicates the validity of the provided regenerator section
unavailable seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.115 |
stmnHistPMRSUASInitializeUsed to initialize the value of the stmnHistPMRSUASValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.15.1.116 |
stmnHistPMOTUUASValueThe count of OTU digital wrapper layer unavailable seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.15.1.117 |
stmnHistPMOTUUASTimeStampThe date and time stamp of the OTU digital wrapper layer
unavailable seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.118 |
stmnHistPMOTUUASValidityIndicates the validity of the provided OTU digital wrapper
layer unavailable seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.119 |
stmnHistPMOTUUASInitializeUsed to initialize the value of the stmnHistPMOTUUASValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.15.1.120 |
stmnHistPMOPRMinValueThe minimum optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.15.1.121 |
stmnHistPMOPRMinTimeStampThe date and time stamp of the minimum optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.122 |
stmnHistPMOPRMinValidityIndicates the validity of the provided minimum optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.123 |
stmnHistPMOPRMinInitializeUsed to initialize the value of the stmnHistPMOPRMinValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.15.1.124 |
stmnHistPMOPRMaxValueThe maximum optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.15.1.125 |
stmnHistPMOPRMaxTimeStampThe date and time stamp of the maximum optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.126 |
stmnHistPMOPRMaxValidityIndicates the validity of the provided maximum optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.127 |
stmnHistPMOPRMaxInitializeUsed to initialize the value of the stmnHistPMOPRMaxValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.15.1.128 |
stmnHistPMOPRAvgValueThe average optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.15.1.129 |
stmnHistPMOPRAvgTimeStampThe date and time stamp of the average optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.130 |
stmnHistPMOPRAvgValidityIndicates the validity of the provided average optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.131 |
stmnHistPMOPRAvgInitializeUsed to initialize the value of the stmnHistPMOPRAvgValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.15.1.132 |
stmnHistPMOPTMinValueThe minimum optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.15.1.133 |
stmnHistPMOPTMinTimeStampThe date and time stamp of the minimum optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.134 |
stmnHistPMOPTMinValidityIndicates the validity of the provided minimum optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.135 |
stmnHistPMOPTMinInitializeUsed to initialize the value of the stmnHistPMOPTMinValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.15.1.136 |
stmnHistPMOPTMaxValueThe maximum optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.15.1.137 |
stmnHistPMOPTMaxTimeStampThe date and time stamp of the maximum optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.138 |
stmnHistPMOPTMaxValidityIndicates the validity of the provided maximum optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.139 |
stmnHistPMOPTMaxInitializeUsed to initialize the value of the stmnHistPMOPTMaxValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.15.1.140 |
stmnHistPMOPTAvgValueThe average optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.15.1.141 |
stmnHistPMOPTAvgTimeStampThe date and time stamp of the average optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.15.1.142 |
stmnHistPMOPTAvgValidityIndicates the validity of the provided average optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.15.1.143 |
stmnHistPMOPTAvgInitializeUsed to initialize the value of the stmnHistPMOPTAvgValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.15.1.144 |
stmnPMThresholdTableA table of threshold levels for performance monitoring counter
values on SDH STM-N facilities, that are used in the
generation of threshold crossing alerts. SEQUENCE OF StmnPMThresholdEntry .1.3.6.1.4.1.18070.2.2.1.6.16 |
stmnPMThresholdEntryThe row entry object of the SDH STM-N performance monitoring
threshold table. Each row of this table contains a set of PM
thresholds for a given interval type that applies to an
individual STM-N facility. StmnPMThresholdEntry .1.3.6.1.4.1.18070.2.2.1.6.16.1 |
stmnPMThresholdTypeIdxThe type of the STM-N facility targeted for PM thresholds. StmnType .1.3.6.1.4.1.18070.2.2.1.6.16.1.1 |
stmnPMThresholdShelfIdxThe shelf number on which the STM-N facility targeted for PM
thresholds is provisioned. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.16.1.2 |
stmnPMThresholdSlotIdxThe slot number on which the STM-N facility targeted for PM
thresholds is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.16.1.3 |
stmnPMThresholdPortIdxThe number of the port on the circuit pack on which the STM-N
facility targeted for PM thresholds is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.16.1.4 |
stmnPMThresholdIntervalTypeIdxThe type of PM bin according to interval length. Thresholds
are supported for the 15-minute and 1-day PM bins only. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.16.1.5 |
stmnPMThresholdRSEBValueThe threshold for the count of regenerator section errored
blocks.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.16.1.6 |
stmnPMThresholdRSBBEValueThe threshold for the count of regenerator section background
block errors.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.16.1.7 |
stmnPMThresholdRSESValueThe threshold for the count of regenerator section errored
seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.16.1.8 |
stmnPMThresholdRSSESValueThe threshold for the count of regenerator section severely
errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.16.1.9 |
stmnPMThresholdRSOFSValueThe threshold for the count of regenerator section
out-of-frame seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.16.1.10 |
stmnPMThresholdMSEBValueThe threshold for the count of multiplex section errored
blocks.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.16.1.11 |
stmnPMThresholdMSBBEValueThe threshold for the count of multiplex section background
block errors.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.16.1.12 |
stmnPMThresholdMSESValueThe threshold for the count of multiplex section errored
seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.16.1.13 |
stmnPMThresholdMSSESValueThe threshold for the count of multiplex section severely
errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.16.1.14 |
stmnPMThresholdMSUASValueThe threshold for the count of multiplex section unavailable
seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.16.1.15 |
stmnPMThresholdOTUEBValueThe threshold for the count of OTU digital wrapper layer
errored blocks.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.16.1.16 |
stmnPMThresholdOTUBBEValueThe threshold for the count of OTU digital wrapper layer
background block errors.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.16.1.17 |
stmnPMThresholdOTUESValueThe threshold for the count of OTU digital wrapper layer
errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.16.1.18 |
stmnPMThresholdOTUSESValueThe threshold for the count of OTU digital wrapper layer
severely errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.16.1.19 |
stmnPMThresholdOTUOFSValueThe threshold for the count of OTU digital wrapper layer
out-of-frame seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.16.1.20 |
stmnPMThresholdUNCRCDWValueThe threshold for the count of uncorrectable codewords.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.16.1.23 |
stmnPMThresholdRSUASValueThe threshold for the count of regenerator section
unavailable seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.16.1.24 |
stmnPMThresholdOTUUASValueThe threshold for the count of OTU digital wrapper layer
unavailable seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.16.1.25 |
vcnCrntPMTableA table of current performance monitoring statistics collected
for the SDH VC-N facilities on the NE. SEQUENCE OF VcnCrntPMEntry .1.3.6.1.4.1.18070.2.2.1.6.17 |
vcnCrntPMEntryThe row entry object of the SDH VC-N current performance
monitoring table. Each row of this table contains a full set
of PM statistics and related data for a current measurement
interval for a given VC-N facility. VcnCrntPMEntry .1.3.6.1.4.1.18070.2.2.1.6.17.1 |
vcnCrntPMTypeIdxThe type of VC-N facility targeted for PMs. VcnType .1.3.6.1.4.1.18070.2.2.1.6.17.1.1 |
vcnCrntPMShelfIdxThe number of the shelf of the VC-N facility targeted for
PMs. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.17.1.2 |
vcnCrntPMSlotIdxThe number of the slot of the VC-N facility targeted for PMs. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.17.1.3 |
vcnCrntPMPortIdxThe number of the port on the circuit pack of the VC-N
facility targeted for PMs. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.17.1.4 |
vcnCrntPMIdxThe channel number of the VC-N facility targeted for PMs. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.17.1.5 |
vcnCrntPMIntervalTypeIdxThe type of PM bin according to interval length. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.17.1.6 |
vcnCrntPMHPEBValueThe count of high order path errored blocks.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.17.1.7 |
vcnCrntPMHPEBTimeStampThe date and time stamp of the high order path errored blocks
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.17.1.8 |
vcnCrntPMHPEBValidityIndicates the validity of the provided high order path errored
blocks value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.17.1.9 |
vcnCrntPMHPBBEValueThe count of high order path background block errors.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.17.1.10 |
vcnCrntPMHPBBETimeStampThe date and time stamp of the high order path background
block errors value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.17.1.11 |
vcnCrntPMHPBBEValidityIndicates the validity of the provided high order path
background block errors value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.17.1.12 |
vcnCrntPMHPESValueThe count of high order path errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.17.1.13 |
vcnCrntPMHPESTimeStampThe date and time stamp of the high order path errored seconds
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.17.1.14 |
vcnCrntPMHPESValidityIndicates the validity of the provided high order path errored
seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.17.1.15 |
vcnCrntPMHPSESValueThe count of high order path severely errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.17.1.16 |
vcnCrntPMHPSESTimeStampThe date and time stamp of the high order path severely
errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.17.1.17 |
vcnCrntPMHPSESValidityIndicates the validity of the provided high order path
severely errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.17.1.18 |
vcnCrntPMHPUASValueThe count of high order path unavailable seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.17.1.19 |
vcnCrntPMHPUASTimeStampThe date and time stamp of the high order path unavailable
seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.17.1.20 |
vcnCrntPMHPUASValidityIndicates the validity of the provided high order path
unavailable seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.17.1.21 |
vcnCrntPMHPEBInitializeUsed to initialize the value of the vcnCrntPMHPEBValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.17.1.22 |
vcnCrntPMHPBBEInitializeUsed to initialize the value of the vcnCrntPMHPBBEValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.17.1.23 |
vcnCrntPMHPESInitializeUsed to initialize the value of the vcnCrntPMHPESValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.17.1.24 |
vcnCrntPMHPSESInitializeUsed to initialize the value of the vcnCrntPMHPSESValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.17.1.25 |
vcnCrntPMHPUASInitializeUsed to initialize the value of the vcnCrntPMHPUASValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.17.1.26 |
vcnHistPMTableA table of historical performance monitoring statistics
collected for the SDH VC-N facilities on the NE. SEQUENCE OF VcnHistPMEntry .1.3.6.1.4.1.18070.2.2.1.6.18 |
vcnHistPMEntryThe row entry object of the SDH VC-N historical performance
monitoring table. Each row of this table contains a full set
of PM statistics and related data for a historical measurement
interval for a given VC-N facility. VcnHistPMEntry .1.3.6.1.4.1.18070.2.2.1.6.18.1 |
vcnHistPMTypeIdxThe type of the VC-N facility targeted for PMs. VcnType .1.3.6.1.4.1.18070.2.2.1.6.18.1.1 |
vcnHistPMShelfIdxThe number of the shelf of the VC-N facility targeted for
PMs. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.18.1.2 |
vcnHistPMSlotIdxThe number of the slot of the VC-N facility targeted for PMs. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.18.1.3 |
vcnHistPMPortIdxThe number of the port on the circuit pack of the VC-N
facility targeted for PMs. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.18.1.4 |
vcnHistPMIdxThe channel number of the VC-N facility targeted for PMs. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.18.1.5 |
vcnHistPMIntervalTypeIdxThe type of PM bin according to interval length. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.18.1.6 |
vcnHistPMIntervalIdxThe specific PM bin number. The range is 1 to 96 for the
15-minute historical bins. For the 1-day historical bin, the
value is 1. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.18.1.7 |
vcnHistPMHPEBValueThe count of high order path errored blocks.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.18.1.8 |
vcnHistPMHPEBTimeStampThe date and time stamp of the high order path errored blocks
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.18.1.9 |
vcnHistPMHPEBValidityIndicates the validity of the provided high order path errored
blocks value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.18.1.10 |
vcnHistPMHPBBEValueThe count of high order path background block errors.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.18.1.11 |
vcnHistPMHPBBETimeStampThe date and time stamp of the high order path background
block errors value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.18.1.12 |
vcnHistPMHPBBEValidityIndicates the validity of the provided high order path
background block errors value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.18.1.13 |
vcnHistPMHPESValueThe count of high order path errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.18.1.14 |
vcnHistPMHPESTimeStampThe date and time stamp of the high order path errored seconds
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.18.1.15 |
vcnHistPMHPESValidityIndicates the validity of the high order path errored seconds
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.18.1.16 |
vcnHistPMHPSESValueThe count of high order path severely errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.18.1.17 |
vcnHistPMHPSESTimeStampThe date and time stamp of the high order path severely
errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.18.1.18 |
vcnHistPMHPSESValidityIndicates the validity of the provided high order path
severely errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.18.1.19 |
vcnHistPMHPUASValueThe count of high order path unavailable seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.18.1.20 |
vcnHistPMHPUASTimeStampThe date and time stamp of the high order path unavailable
seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.18.1.21 |
vcnHistPMHPUASValidityIndicates the validity of the provided high order path
unavailable seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.18.1.22 |
vcnHistPMHPEBInitializeUsed to initialize the value of the vcnHistPMHPEBValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.18.1.23 |
vcnHistPMHPBBEInitializeUsed to initialize the value of the vcnHistPMHPBBEValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.18.1.24 |
vcnHistPMHPESInitializeUsed to initialize the value of the vcnHistPMHPESValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.18.1.25 |
vcnHistPMHPSESInitializeUsed to initialize the value of the vcnHistPMHPSESValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.18.1.26 |
vcnHistPMHPUASInitializeUsed to initialize the value of the vcnHistPMHPUASValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.18.1.27 |
vcnPMThresholdByPortTableA table of threshold levels for performance monitoring counter
values on SDH VC-N facilities, that are used in the generation
of threshold crossing alerts. The VC-N threshold settings will
be the same for all channels on a given STM-N facility port. SEQUENCE OF VcnPMThresholdByPortEntry .1.3.6.1.4.1.18070.2.2.1.6.19 |
vcnPMThresholdByPortEntryThe row entry object of the SDH STM-N performance monitoring
threshold by port table. Each row of this table contains a set
of PM thresholds for a given interval type that applies to all
the VC-N channels on an STM-N facility port. VcnPMThresholdByPortEntry .1.3.6.1.4.1.18070.2.2.1.6.19.1 |
vcnPMThresholdByPortTypeIdxThe type of the VC-N facility targeted for PM thresholds. VcnType .1.3.6.1.4.1.18070.2.2.1.6.19.1.1 |
vcnPMThresholdByPortShelfIdxThe shelf number of the VC-N facilities targeted for PM
thresholds. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.19.1.2 |
vcnPMThresholdByPortSlotIdxThe slot number of the VC-N facilities targeted for PM
thresholds. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.19.1.3 |
vcnPMThresholdByPortIdxThe number of the port on the circuit pack of the VC-N
facilities targeted for PM thresholds. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.19.1.4 |
vcnPMThresholdByPortIntervalTypeIdxThe type of PM bin according to interval length. Thresholds
are supported for the 15-minute and 1-day PM bins only. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.19.1.5 |
vcnPMThresholdByPortHPEBValueThe threshold for the count of high order path errored
blocks.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.19.1.6 |
vcnPMThresholdByPortHPBBEValueThe threshold for the count of high order path background
block errors.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.19.1.7 |
vcnPMThresholdByPortHPESValueThe threshold for the count of high order path errored
seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.19.1.8 |
vcnPMThresholdByPortHPSESValueThe threshold for the count of high order path severely
errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.19.1.9 |
vcnPMThresholdByPortHPUASValueThe threshold for the count of high order path unavailable
seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.19.1.10 |
geCrntPMTableA table of current performance monitoring statistics collected
for the Gigabit Ethernet facilities on the NE. SEQUENCE OF GeCrntPMEntry .1.3.6.1.4.1.18070.2.2.1.6.20 |
geCrntPMEntryThe row entry object of the Gigabit Ethernet current
performance monitoring table. Each row of this table contains
a full set of PM statistics and related data for a current
measurement interval for a given Gigabit Ethernet facility. GeCrntPMEntry .1.3.6.1.4.1.18070.2.2.1.6.20.1 |
geCrntPMShelfIdxThe number of the shelf on which the GE facility targeted for
PMs is provisioned. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.20.1.1 |
geCrntPMSlotIdxThe number of the slot within which the GE facility targeted
for PMs is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.20.1.2 |
geCrntPMPortIdxThe number of the port on the circuit pack on which the GE
facility targeted for PMs is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.20.1.3 |
geCrntPMIntervalTypeIdxThe type of PM bin according to interval length. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.20.1.4 |
geCrntPMOPRValueThe optical power received on the input of the GE facility
port.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.20.1.5 |
geCrntPMOPRTimeStampThe date and time stamp of the optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.6 |
geCrntPMOPRValidityIndicates the validity of the provided optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.7 |
geCrntPMOPTValueThe optical power transmitted at the output of the GE facility
port.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.20.1.8 |
geCrntPMOPTTimeStampThe date and time stamp of the optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.9 |
geCrntPMOPTValidityIndicates the validity of the provided optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.10 |
geCrntPMTempValueThe temperature measured on the GE facility port.ro INTEGER (-32768..32767) UNITS "degrees Celsius" .1.3.6.1.4.1.18070.2.2.1.6.20.1.11 |
geCrntPMTempTimeStampThe date and time stamp of the temperature value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.12 |
geCrntPMTempValidityIndicates the validity of the provided temperature value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.13 |
geCrntPMSupplyVoltageValueThe supply voltage measured on the GE facility port.ro FixedX10 UNITS "mVolts/10" .1.3.6.1.4.1.18070.2.2.1.6.20.1.14 |
geCrntPMSupplyVoltageTimeStampThe date and time stamp of the supply voltage value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.15 |
geCrntPMSupplyVoltageValidityIndicates the validity of the provided supply voltage value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.16 |
geCrntPMLBCValueThe laser bias current measured on the GE facility port.ro INTEGER (-32768..32767) UNITS "mAmp" .1.3.6.1.4.1.18070.2.2.1.6.20.1.17 |
geCrntPMLBCTimeStampThe date and time stamp of the laser bias current value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.18 |
geCrntPMLBCValidityIndicates the validity of the provided laser bias current
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.19 |
geCrntPMCVValueThe count of Gigabit Ethernet 8B/10B coding violations.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.20.1.20 |
geCrntPMCVTimeStampThe date and time stamp of the GE coding violations value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.21 |
geCrntPMCVValidityIndicates the validity of the provided GE coding violations
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.22 |
geCrntPMESValueThe count of GE errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.20.1.23 |
geCrntPMESTimeStampThe date and time stamp of the GE errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.24 |
geCrntPMESValidityIndicates the validity of the provided GE errored seconds
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.25 |
geCrntPMSESValueThe count of GE severely errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.20.1.26 |
geCrntPMSESTimeStampThe date and time stamp of the GE severely errored seconds
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.27 |
geCrntPMSESValidityIndicates the validity of the provided GE severely errored
seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.28 |
geCrntPMTFRCRXValueThe Gigabit Ethernet total received frame count.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.20.1.29 |
geCrntPMTFRCRXTimeStampThe date and time stamp of the GE total received frame count
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.30 |
geCrntPMTFRCRXValidityIndicates the validity of the provided GE total received frame
count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.31 |
geCrntPMTFRCRXInitializeUsed to initialize the value of the geCrntPMTFRCRXValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.32 |
geCrntPMTFRCTXValueThe Gigabit Ethernet total transmitted frame count.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.20.1.33 |
geCrntPMTFRCTXTimeStampThe date and time stamp of the GE total transmitted frame
count value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.34 |
geCrntPMTFRCTXValidityIndicates the validity of the provided GE total transmitted
frame count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.35 |
geCrntPMTFRCTXInitializeUsed to initialize the value of the geCrntPMTFRCTXValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.36 |
geCrntPMFRDRValueThe count of Gigabit Ethernet discarded frames.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.20.1.37 |
geCrntPMFRDRTimeStampThe date and time stamp of the GE discarded frames value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.38 |
geCrntPMFRDRValidityIndicates the validity of the provided GE discarded frames
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.39 |
geCrntPMFCSEValueThe count of Gigabit Ethernet frame checksum errors.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.20.1.40 |
geCrntPMFCSETimeStampThe date and time stamp of the GE frame checksum errors
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.41 |
geCrntPMFCSEValidityIndicates the validity of the provided GE frame checksum
errors value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.42 |
geCrntPMTBYCRXValueThe Gigabit Ethernet total received byte count.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.20.1.43 |
geCrntPMTBYCRXTimeStampThe date and time stamp of the GE total received byte count
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.44 |
geCrntPMTBYCRXValidityIndicates the validity of the provided GE total received byte
count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.45 |
geCrntPMTBYCRXInitializeUsed to initialize the value of the geCrntPMTBYCRXValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.46 |
geCrntPMTBYCTXValueThe Gigabit Ethernet total transmitted byte count.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.20.1.47 |
geCrntPMTBYCTXTimeStampThe date and time stamp of the GE total transmitted byte count
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.48 |
geCrntPMTBYCTXValidityIndicates the validity of the provided GE total transmitted
byte count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.49 |
geCrntPMTBYCTXInitializeUsed to initialize the value of the geCrntPMTBYCTXValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.50 |
geCrntPMBCSTValueThe total number of good frames received that were directed to
the broadcast address. Note that this does not include
multicast frames.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.20.1.51 |
geCrntPMBCSTTimeStampThe date and time stamp of the broadcast packets received
count value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.52 |
geCrntPMBCSTValidityIndicates the validity of the provided broadcast packets
received count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.53 |
geCrntPMBCSTInitializeUsed to initialize the value of the geCrntPMBCSTValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.54 |
geCrntPMMCSTValueThe total number of good frames received that were directed to
a multicast address. Note that this number does not include
frames directed to the broadcast address.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.20.1.55 |
geCrntPMMCSTTimeStampThe date and time stamp of the multicast packets received
count value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.56 |
geCrntPMMCSTValidityIndicates the validity of the provided multicast packets
received count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.57 |
geCrntPMMCSTInitializeUsed to initialize the value of the geCrntPMMCSTValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.58 |
geCrntPMSIZE64ValueThe total number of 64 byte frames received (excluding framing
bits but including FCS octets).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.20.1.59 |
geCrntPMSIZE64TimeStampThe date and time stamp of the count of 64-byte packets
received.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.60 |
geCrntPMSIZE64ValidityIndicates the validity of the provided count of 64-byte
packets packets received.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.61 |
geCrntPMSIZE64InitializeUsed to initialize the value of the geCrntPMSIZE64Value object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.62 |
geCrntPMSIZE65To127ValueThe total number of frames received that are 65 to 127 bytes
inclusive in length (excluding framing bits but including FCS
octets).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.20.1.63 |
geCrntPMSIZE65To127TimeStampThe date and time stamp of the count of packets between 65 and
127 bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.64 |
geCrntPMSIZE65To127ValidityIndicates the validity of the provided count of packets
between 65 and 127 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.65 |
geCrntPMSIZE65To127InitializeUsed to initialize the value of the geCrntPMSIZE65To127Value
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.66 |
geCrntPMSIZE128To255ValueThe total number of frames received that are 128 to 255 bytes
inclusive in length (excluding framing bits but including FCS
octets).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.20.1.67 |
geCrntPMSIZE128To255TimeStampThe date and time stamp of the count of packets between 128
and 255 bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.68 |
geCrntPMSIZE128To255ValidityIndicates the validity of the provided count of packets
between 128 and 255 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.69 |
geCrntPMSIZE128To255InitializeUsed to initialize the value of the geCrntPMSIZE128To255Value
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.70 |
geCrntPMSIZE256To511ValueThe total number of frames received that are 256 to 511 bytes
inclusive in length (excluding framing bits but including FCS
octets).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.20.1.71 |
geCrntPMSIZE256To511TimeStampThe date and time stamp of the count of packets between 256
and 511 bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.72 |
geCrntPMSIZE256To511ValidityIndicates the validity of the provided count of packets
between 256 and 511 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.73 |
geCrntPMSIZE256To511InitializeUsed to initialize the value of the geCrntPMSIZE256To511Value
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.74 |
geCrntPMSIZE512To1023ValueThe total number of frames received that are 512 to 1023 bytes
inclusive in length (excluding framing bits but including FCS
octets).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.20.1.75 |
geCrntPMSIZE512To1023TimeStampThe date and time stamp of the count of packets between 512
and 1023 bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.76 |
geCrntPMSIZE512To1023ValidityIndicates the validity of the provided count of packets
between 512 and 1023 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.77 |
geCrntPMSIZE512To1023InitializeUsed to initialize the value of the geCrntPMSIZE512To1023Value
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.78 |
geCrntPMSIZE1024To1518ValueThe total number of frames received that are 1024 to 1518
bytes inclusive in length (excluding framing bits but
including FCS octets).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.20.1.79 |
geCrntPMSIZE1024To1518TimeStampThe date and time stamp of the count of packets between 1024
and 1518 bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.80 |
geCrntPMSIZE1024To1518ValidityIndicates the validity of the provided count of packets
between 1024 and 1518 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.81 |
geCrntPMSIZE1024To1518InitializeUsed to initialize the value of the
geCrntPMSIZE1024To1518Value object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.82 |
geCrntPMSIZEOver1518ValueThe total number of frames received that are greater than or
equal to 1519 bytes in length (excluding framing bits but
including FCS octets).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.20.1.83 |
geCrntPMSIZEOver1518TimeStampThe date and time stamp of the count of packets over 1518
bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.84 |
geCrntPMSIZEOver1518ValidityIndicates the validity of the provided count of packets over
1518 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.85 |
geCrntPMSIZEOver1518InitializeUsed to initialize the value of the geCrntPMSIZEOver1518Value
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.86 |
geCrntPMTPFCRXValueThe Gigabit Ethernet total received pause frame count.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.20.1.87 |
geCrntPMTPFCRXTimeStampThe date and time stamp of the GE total received pause frame
count value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.88 |
geCrntPMTPFCRXValidityIndicates the validity of the provided GE total received pause
frame count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.89 |
geCrntPMTPFCRXInitializeUsed to initialize the value of the geCrntPMTPFCRXValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.90 |
geCrntPMTPFCTXValueThe Gigabit Ethernet total transmitted pause frame count.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.20.1.91 |
geCrntPMTPFCTXTimeStampThe date and time stamp of the GE total transmitted pause
frame count value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.92 |
geCrntPMTPFCTXValidityIndicates the validity of the provided GE total transmitted
pause frame count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.93 |
geCrntPMTPFCTXInitializeUsed to initialize the value of the geCrntPMTPFCTXValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.94 |
geCrntPMUSIZEValueThe total number of frames received that were less than 64
octets long (excluding framing bits, but including FCS octets)
and were otherwise well formed.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.20.1.95 |
geCrntPMUSIZETimeStampThe date and time stamp of the count of undersized packets.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.96 |
geCrntPMUSIZEValidityIndicates the validity of the provided count of undersized
packets.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.97 |
geCrntPMOSIZEValueThe total number of frames received that were longer than 9600
octets (excluding framing bits, but including FCS octets) and
were otherwise well formed.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.20.1.98 |
geCrntPMOSIZETimeStampThe date and time stamp of the count of oversized packets.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.99 |
geCrntPMOSIZEValidityIndicates the validity of the provided count of oversized
packets.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.100 |
geCrntPMFRGTValueThe total number of frames received that were less than 64
octets in length (excluding framing bits but including FCS
octets) and had either a bad Frame Check Sequence (FCS) with
an integral number of octets (FCS Error) or a bad FCS with a
non-integral number of octets (Alignment Error).rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.20.1.101 |
geCrntPMFRGTTimeStampThe date and time stamp of the count of received packet
fragments.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.102 |
geCrntPMFRGTValidityIndicates the validity of the provided count of received
packet fragments.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.103 |
geCrntPMJABRValueThe total number of frames received that were longer than
14336 9600 octets (excluding framing bits, but including FCS
octets), and had either a bad Frame Check Sequence (FCS) with
an integral number of octets (FCS Error) or a bad FCS with
non-integral number of octets (Alignment Error).rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.20.1.104 |
geCrntPMJABRTimeStampThe date and time stamp of the count of received jabbers.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.105 |
geCrntPMJABRValidityIndicates the validity of the provided count of received
jabbers.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.106 |
geCrntPMCVInitializeUsed to initialize the value of the geCrntPMCVValue object to
0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.107 |
geCrntPMESInitializeUsed to initialize the value of the geCrntPMESValue object to
0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.108 |
geCrntPMSESInitializeUsed to initialize the value of the geCrntPMSESValue object to
0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.109 |
geCrntPMFCSEInitializeUsed to initialize the value of the geCrntPMFCSEValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.110 |
geCrntPMFRDRInitializeUsed to initialize the value of the geCrntPMFRDRValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.111 |
geCrntPMUSIZEInitializeUsed to initialize the value of the geCrntPMUSIZEValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.112 |
geCrntPMOSIZEInitializeUsed to initialize the value of the geCrntPMOSIZEValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.113 |
geCrntPMFRGTInitializeUsed to initialize the value of the geCrntPMFRGTValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.114 |
geCrntPMJABRInitializeUsed to initialize the value of the geCrntPMJABRValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.115 |
geCrntPMUASValueThe count of unavailable seconds. This object applies
only to transciever ports provisioned for the gigabit ethernet
protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.20.1.116 |
geCrntPMUASTimeStampThe date and time stamp of the unavailable seconds
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.117 |
geCrntPMUASValidityIndicates the validity of the provided unavailable
seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.118 |
geCrntPMUASInitializeUsed to initialize the value of the geCrntPMUASValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.119 |
geCrntPMOPRMinValueThe minimum optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.20.1.120 |
geCrntPMOPRMinTimeStampThe date and time stamp of the minimum optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.121 |
geCrntPMOPRMinValidityIndicates the validity of the provided minimum optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.122 |
geCrntPMOPRMinInitializeUsed to initialize the value of the geCrntPMOPRMinValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.123 |
geCrntPMOPRMaxValueThe maximum optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.20.1.124 |
geCrntPMOPRMaxTimeStampThe date and time stamp of the maximum optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.125 |
geCrntPMOPRMaxValidityIndicates the validity of the provided maximum optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.126 |
geCrntPMOPRMaxInitializeUsed to initialize the value of the geCrntPMOPRMaxValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.127 |
geCrntPMOPRAvgValueThe average optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.20.1.128 |
geCrntPMOPRAvgTimeStampThe date and time stamp of the average optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.129 |
geCrntPMOPRAvgValidityIndicates the validity of the provided average optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.130 |
geCrntPMOPRAvgInitializeUsed to initialize the value of the geCrntPMOPRAvgValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.131 |
geCrntPMOPTMinValueThe minimum optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.20.1.132 |
geCrntPMOPTMinTimeStampThe date and time stamp of the minimum optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.133 |
geCrntPMOPTMinValidityIndicates the validity of the provided minimum optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.134 |
geCrntPMOPTMinInitializeUsed to initialize the value of the geCrntPMOPTMinValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.135 |
geCrntPMOPTMaxValueThe maximum optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.20.1.136 |
geCrntPMOPTMaxTimeStampThe date and time stamp of the maximum optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.137 |
geCrntPMOPTMaxValidityIndicates the validity of the provided maximum optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.138 |
geCrntPMOPTMaxInitializeUsed to initialize the value of the geCrntPMOPTMaxValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.139 |
geCrntPMOPTAvgValueThe average optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.20.1.140 |
geCrntPMOPTAvgTimeStampThe date and time stamp of the average optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.20.1.141 |
geCrntPMOPTAvgValidityIndicates the validity of the provided average optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.20.1.142 |
geCrntPMOPTAvgInitializeUsed to initialize the value of the geCrntPMOPTAvgValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.20.1.143 |
geHistPMTableA table of historical performance monitoring statistics
collected for the Gigabit Ethernet facilities on the NE. SEQUENCE OF GeHistPMEntry .1.3.6.1.4.1.18070.2.2.1.6.21 |
geHistPMEntryThe row entry object of the Gigabit Ethernet historical
performance monitoring table. Each row of this table contains
a full set of PM statistics and related data for a historical
measurement interval for a given Gigabit Ethernet facility. GeHistPMEntry .1.3.6.1.4.1.18070.2.2.1.6.21.1 |
geHistPMShelfIdxThe number of the shelf on which the GE facility targeted for
PMs is provisioned. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.21.1.1 |
geHistPMSlotIdxThe number of the slot within which the GE facility targeted
for PMs is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.21.1.2 |
geHistPMPortIdxThe number of the port on the circuit pack on which the GE
facility targeted for PMs is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.21.1.3 |
geHistPMIntervalTypeIdxThe type of PM bin according to interval length. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.21.1.4 |
geHistPMIntervalIdxThe specific PM bin number. The range is 1 to 96 for the
15-minute historical bins. For the 1-day historical bin, the
value is 1. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.21.1.5 |
geHistPMOPRValueThe optical power received on the input of the GE facility
port.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.21.1.6 |
geHistPMOPRTimeStampThe date and time stamp of the optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.7 |
geHistPMOPRValidityIndicates the validity of the provided optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.8 |
geHistPMOPTValueThe optical power transmitted at the output of the GE facility
port.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.21.1.9 |
geHistPMOPTTimeStampThe date and time stamp of the optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.10 |
geHistPMOPTValidityIndicates the validity of the provided optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.11 |
geHistPMTempValueThe temperature measured on the GE facility port.ro INTEGER (-32768..32767) UNITS "degrees Celsius" .1.3.6.1.4.1.18070.2.2.1.6.21.1.12 |
geHistPMTempTimeStampThe date and time stamp of the temperature value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.13 |
geHistPMTempValidityIndicates the validity of the provided temperature value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.14 |
geHistPMSupplyVoltageValueThe supply voltage measured on the GE facility port.ro FixedX10 UNITS "mVolts/10" .1.3.6.1.4.1.18070.2.2.1.6.21.1.15 |
geHistPMSupplyVoltageTimeStampThe date and time stamp of the supply voltage value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.16 |
geHistPMSupplyVoltageValidityIndicates the validity of the provided supply voltage value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.17 |
geHistPMLBCValueThe laser bias current measured on the GE facility port.ro INTEGER (-32768..32767) UNITS "mAmp" .1.3.6.1.4.1.18070.2.2.1.6.21.1.18 |
geHistPMLBCTimeStampThe date and time stamp of the laser bias current value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.19 |
geHistPMLBCValidityIndicates the validity of the provided laser bias current
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.20 |
geHistPMCVValueThe count of Gigabit Ethernet 8B/10B coding violations.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.21.1.21 |
geHistPMCVTimeStampThe date and time stamp of the GE coding violations value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.22 |
geHistPMCVValidityIndicates the validity of the provided GE coding violations
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.23 |
geHistPMESValueThe count of GE errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.21.1.24 |
geHistPMESTimeStampThe date and time stamp of the GE errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.25 |
geHistPMESValidityIndicates the validity of the provided GE errored seconds
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.26 |
geHistPMSESValueThe count of GE severely errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.21.1.27 |
geHistPMSESTimeStampThe date and time stamp of the GE severely errored seconds
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.28 |
geHistPMSESValidityIndicates the validity of the provided GE severely errored
seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.29 |
geHistPMTFRCRXValueThe Gigabit Ethernet total received byte count.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.21.1.30 |
geHistPMTFRCRXTimeStampThe date and time stamp of the GE total received byte count
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.31 |
geHistPMTFRCRXValidityIndicates the validity of the provided GE total received byte
count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.32 |
geHistPMTFRCRXInitializeUsed to initialize the value of the geHistPMTBYCRXValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.33 |
geHistPMTFRCTXValueThe Gigabit Ethernet total transmitted frame count.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.21.1.34 |
geHistPMTFRCTXTimeStampThe date and time stamp of the GE total transmitted frame
count value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.35 |
geHistPMTFRCTXValidityIndicates the validity of the provided GE total transmitted
frame count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.36 |
geHistPMTFRCTXInitializeUsed to initialize the value of the geHistPMTFRCTXValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.37 |
geHistPMFRDRValueThe count of Gigabit Ethernet discarded frames.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.21.1.38 |
geHistPMFRDRTimeStampThe date and time stamp of the GE discarded frames value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.39 |
geHistPMFRDRValidityIndicates the validity of the provided GE discarded frames
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.40 |
geHistPMFCSEValueThe count of Gigabit Ethernet frame checksum errors.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.21.1.41 |
geHistPMFCSETimeStampThe date and time stamp of the GE frame checksum errors
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.42 |
geHistPMFCSEValidityIndicates the validity of the provided GE frame checksum
errors value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.43 |
geHistPMTBYCRXValueThe Gigabit Ethernet total received byte count.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.21.1.44 |
geHistPMTBYCRXTimeStampThe date and time stamp of the GE total received byte count
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.45 |
geHistPMTBYCRXValidityIndicates the validity of the provided GE total received byte
count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.46 |
geHistPMTBYCRXInitializeUsed to initialize the value of the geHistPMTBYCRXValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.47 |
geHistPMTBYCTXValueThe Gigabit Ethernet total transmitted byte count.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.21.1.48 |
geHistPMTBYCTXTimeStampThe date and time stamp of the GE total transmitted byte count
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.49 |
geHistPMTBYCTXValidityIndicates the validity of the provided GE total transmitted
byte count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.50 |
geHistPMTBYCTXInitializeUsed to initialize the value of the geHistPMTBYCTXValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.51 |
geHistPMBCSTValueThe total number of good frames received that were directed to
the broadcast address. Note that this does not include
multicast frames.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.21.1.52 |
geHistPMBCSTTimeStampThe date and time stamp of the broadcast packets received
count value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.53 |
geHistPMBCSTValidityIndicates the validity of the provided broadcast packets
received count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.54 |
geHistPMBCSTInitializeUsed to initialize the value of the geHistPMBCSTValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.55 |
geHistPMMCSTValueThe total number of good frames received that were directed to
a multicast address. Note that this number does not include
frames directed to the broadcast address.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.21.1.56 |
geHistPMMCSTTimeStampThe date and time stamp of the multicast packets received
count value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.57 |
geHistPMMCSTValidityIndicates the validity of the provided multicast packets
received count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.58 |
geHistPMMCSTInitializeUsed to initialize the value of the geHistPMMCSTValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.59 |
geHistPMSIZE64ValueThe total number of 64 byte frames received (excluding framing
bits but including FCS octets).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.21.1.60 |
geHistPMSIZE64TimeStampThe date and time stamp of the count of 64-byte packets
received.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.61 |
geHistPMSIZE64ValidityIndicates the validity of the provided count of 64-byte
packets packets received.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.62 |
geHistPMSIZE64InitializeUsed to initialize the value of the geHistPMSIZE64Value object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.63 |
geHistPMSIZE65To127ValueThe total number of frames received that are 65 to 127 bytes
inclusive in length (excluding framing bits but including FCS
octets).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.21.1.64 |
geHistPMSIZE65To127TimeStampThe date and time stamp of the count of packets between 65 and
127 bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.65 |
geHistPMSIZE65To127ValidityIndicates the validity of the provided count of packets
between 65 and 127 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.66 |
geHistPMSIZE65To127InitializeUsed to initialize the value of the geHistPMSIZE65To127Value
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.67 |
geHistPMSIZE128To255ValueThe total number of frames received that are 128 to 255 bytes
inclusive in length (excluding framing bits but including FCS
octets).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.21.1.68 |
geHistPMSIZE128To255TimeStampThe date and time stamp of the count of packets between 128
and 255 bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.69 |
geHistPMSIZE128To255ValidityIndicates the validity of the provided count of packets
between 128 and 255 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.70 |
geHistPMSIZE128To255InitializeUsed to initialize the value of the geHistPMSIZE128To255Value
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.71 |
geHistPMSIZE256To511ValueThe total number of frames received that are 256 to 511 bytes
inclusive in length (excluding framing bits but including FCS
octets).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.21.1.72 |
geHistPMSIZE256To511TimeStampThe date and time stamp of the count of packets between 256
and 511 bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.73 |
geHistPMSIZE256To511ValidityIndicates the validity of the provided count of packets
between 256 and 511 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.74 |
geHistPMSIZE256To511InitializeUsed to initialize the value of the geHistPMSIZE256To511Value
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.75 |
geHistPMSIZE512To1023ValueThe total number of frames received that are 512 to 1023 bytes
inclusive in length (excluding framing bits but including FCS
octets).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.21.1.76 |
geHistPMSIZE512To1023TimeStampThe date and time stamp of the count of packets between 512
and 1023 bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.77 |
geHistPMSIZE512To1023ValidityIndicates the validity of the provided count of packets
between 512 and 1023 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.78 |
geHistPMSIZE512To1023InitializeUsed to initialize the value of the geHistPMSIZE512To1023Value
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.79 |
geHistPMSIZE1024To1518ValueThe total number of frames received that are 1024 to 1518
bytes inclusive in length (excluding framing bits but
including FCS octets).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.21.1.80 |
geHistPMSIZE1024To1518TimeStampThe date and time stamp of the count of packets between 1024
and 1518 bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.81 |
geHistPMSIZE1024To1518ValidityIndicates the validity of the provided count of packets
between 1024 and 1518 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.82 |
geHistPMSIZE1024To1518InitializeUsed to initialize the value of the
geHistPMSIZE1024To1518Value object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.83 |
geHistPMSIZEOver1518ValueThe total number of frames received that are greater than or
equal to 1519 bytes in length (excluding framing bits but
including FCS octets).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.21.1.84 |
geHistPMSIZEOver1518TimeStampThe date and time stamp of the count of packets over 1518
bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.85 |
geHistPMSIZEOver1518ValidityIndicates the validity of the provided count of packets over
1518 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.86 |
geHistPMSIZEOver1518InitializeUsed to initialize the value of the geHistPMSIZEOver1518Value
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.87 |
geHistPMTPFCRXValueThe Gigabit Ethernet total received pause frame count.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.21.1.88 |
geHistPMTPFCRXTimeStampThe date and time stamp of the GE total received pause frame
count value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.89 |
geHistPMTPFCRXValidityIndicates the validity of the provided GE total received pause
frame count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.90 |
geHistPMTPFCRXInitializeUsed to initialize the value of the geHistPMTPFCRXValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.91 |
geHistPMTPFCTXValueThe Gigabit Ethernet total transmitted pause frame count.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.21.1.92 |
geHistPMTPFCTXTimeStampThe date and time stamp of the GE total transmitted pause
frame count value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.93 |
geHistPMTPFCTXValidityIndicates the validity of the provided GE total transmitted
pause frame count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.94 |
geHistPMTPFCTXInitializeUsed to initialize the value of the geHistPMTPFCTXValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.95 |
geHistPMUSIZEValueThe total number of frames received that were less than 64
octets long (excluding framing bits, but including FCS octets)
and were otherwise well formed.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.21.1.96 |
geHistPMUSIZETimeStampThe date and time stamp of the count of undersized packets.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.97 |
geHistPMUSIZEValidityIndicates the validity of the provided count of undersized
packets.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.98 |
geHistPMOSIZEValueThe total number of frames received that were longer than 9600
octets (excluding framing bits, but including FCS octets) and
were otherwise well formed.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.21.1.99 |
geHistPMOSIZETimeStampThe date and time stamp of the count of oversized packets.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.100 |
geHistPMOSIZEValidityIndicates the validity of the provided count of oversized
packets.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.101 |
geHistPMFRGTValueThe total number of frames received that were less than 64
octets in length (excluding framing bits but including FCS
octets) and had either a bad Frame Check Sequence (FCS) with
an integral number of octets (FCS Error) or a bad FCS with a
non-integral number of octets (Alignment Error).rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.21.1.102 |
geHistPMFRGTTimeStampThe date and time stamp of the count of received packet
fragments.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.103 |
geHistPMFRGTValidityIndicates the validity of the provided count of received
packet fragments.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.104 |
geHistPMJABRValueThe total number of frames received that were longer than
14336 9600 octets (excluding framing bits, but including FCS
octets), and had either a bad Frame Check Sequence (FCS) with
an integral number of octets (FCS Error) or a bad FCS with
non-integral number of octets (Alignment Error).rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.21.1.105 |
geHistPMJABRTimeStampThe date and time stamp of the count of received jabbers.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.106 |
geHistPMJABRValidityIndicates the validity of the provided count of received
jabbers.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.107 |
geHistPMCVInitializeUsed to initialize the value of the geHistPMCVValue object to
0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.108 |
geHistPMESInitializeUsed to initialize the value of the geHistPMESValue object to
0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.109 |
geHistPMSESInitializeUsed to initialize the value of the geHistPMSESValue object to
0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.110 |
geHistPMFCSEInitializeUsed to initialize the value of the geHistPMFCSEValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.111 |
geHistPMFRDRInitializeUsed to initialize the value of the geHistPMFRDRValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.112 |
geHistPMUSIZEInitializeUsed to initialize the value of the geHistPMUSIZEValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.113 |
geHistPMOSIZEInitializeUsed to initialize the value of the geHistPMOSIZEValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.114 |
geHistPMFRGTInitializeUsed to initialize the value of the geHistPMFRGTValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.115 |
geHistPMJABRInitializeUsed to initialize the value of the geHistPMJABRValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.116 |
geHistPMUASValueThe count of unavailable seconds. This object applies
only to transciever ports provisioned for the gigabit ethernet
protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.21.1.117 |
geHistPMUASTimeStampThe date and time stamp of the unavailable seconds
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.118 |
geHistPMUASValidityIndicates the validity of the provided unavailable
seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.119 |
geHistPMUASInitializeUsed to initialize the value of the geHistPMUASValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.120 |
geHistPMOPRMinValueThe minimum optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.21.1.121 |
geHistPMOPRMinTimeStampThe date and time stamp of the minimum optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.122 |
geHistPMOPRMinValidityIndicates the validity of the provided minimum optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.123 |
geHistPMOPRMinInitializeUsed to initialize the value of the geHistPMOPRMinValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.124 |
geHistPMOPRMaxValueThe maximum optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.21.1.125 |
geHistPMOPRMaxTimeStampThe date and time stamp of the maximum optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.126 |
geHistPMOPRMaxValidityIndicates the validity of the provided maximum optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.127 |
geHistPMOPRMaxInitializeUsed to initialize the value of the geHistPMOPRMaxValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.128 |
geHistPMOPRAvgValueThe average optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.21.1.129 |
geHistPMOPRAvgTimeStampThe date and time stamp of the average optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.130 |
geHistPMOPRAvgValidityIndicates the validity of the provided average optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.131 |
geHistPMOPRAvgInitializeUsed to initialize the value of the geHistPMOPRAvgValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.132 |
geHistPMOPTMinValueThe minimum optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.21.1.133 |
geHistPMOPTMinTimeStampThe date and time stamp of the minimum optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.134 |
geHistPMOPTMinValidityIndicates the validity of the provided minimum optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.135 |
geHistPMOPTMinInitializeUsed to initialize the value of the geHistPMOPTMinValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.136 |
geHistPMOPTMaxValueThe maximum optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.21.1.137 |
geHistPMOPTMaxTimeStampThe date and time stamp of the maximum optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.138 |
geHistPMOPTMaxValidityIndicates the validity of the provided maximum optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.139 |
geHistPMOPTMaxInitializeUsed to initialize the value of the geHistPMOPTMaxValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.140 |
geHistPMOPTAvgValueThe average optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.21.1.141 |
geHistPMOPTAvgTimeStampThe date and time stamp of the average optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.21.1.142 |
geHistPMOPTAvgValidityIndicates the validity of the provided average optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.21.1.143 |
geHistPMOPTAvgInitializeUsed to initialize the value of the geHistPMOPTAvgValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.21.1.144 |
gePMThresholdTableA table of threshold levels for performance monitoring counter
values on Gigabit Ethernet facilities, that are used in the
generation of threshold crossing alerts. SEQUENCE OF GePMThresholdEntry .1.3.6.1.4.1.18070.2.2.1.6.22 |
gePMThresholdEntryThe row entry object of the Gigabit Ethernet performance
monitoring threshold table. Each row of this table contains a
set of PM thresholds for a given interval type that applies to
an individual GE facility. GePMThresholdEntry .1.3.6.1.4.1.18070.2.2.1.6.22.1 |
gePMThresholdShelfIdxThe shelf number on which the Gigabit Ethernet facility
targeted for PM thresholds is provisioned. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.22.1.1 |
gePMThresholdSlotIdxThe slot number on which the Gigabit Ethernet facility
targeted for PM thresholds is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.22.1.2 |
gePMThresholdPortIdxThe number of the port on the circuit pack on which the
Gigabit Ethernet facility targeted for PM thresholds is
provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.22.1.3 |
gePMThresholdIntervalTypeIdxThe type of PM bin according to interval length. Thresholds
are supported for the 15-minute and 1-day PM bins only. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.22.1.4 |
gePMThresholdCVValueThe threshold for the count of Gigabit Ethernet 8B/10B coding
violations.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.22.1.5 |
gePMThresholdESValueThe threshold for the count of Gigabit Ethernet errored
seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.22.1.6 |
gePMThresholdSESValueThe threshold for the count of Gigabit Ethernet severely
errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.22.1.7 |
gePMThresholdFRDRValueThe threshold for the count of Gigabit Ethernet discarded
frames.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.22.1.8 |
gePMThresholdFCSEValueThe threshold for the count of Gigabit Ethernet frame check
sum errors.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.22.1.9 |
gePMThresholdUSIZEValueThe threshold for the count of Gigabit Ethernet undersized
frames.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.22.1.10 |
gePMThresholdOSIZEValueThe threshold for the count of Gigabit Ethernet oversized
frames.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.22.1.11 |
gePMThresholdFRGTValueThe threshold for the count of Gigabit Ethernet frame
fragments.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.22.1.12 |
gePMThresholdJABRValueThe threshold for the count of Gigabit Ethernet jabbers.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.22.1.13 |
gePMThresholdUASValueThe threshold for the count of Gigabit Ethernet unavailable seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.22.1.14 |
fcCrntPMTableA table of current performance monitoring statistics collected
for the Fiber Channel facilities on the NE. SEQUENCE OF FcCrntPMEntry .1.3.6.1.4.1.18070.2.2.1.6.23 |
fcCrntPMEntryThe row entry object of the Fiber Channel current performance
monitoring table. Each row of this table contains a full set
of PM statistics and related data for a current measurement
interval for a given Fiber Channel facility. FcCrntPMEntry .1.3.6.1.4.1.18070.2.2.1.6.23.1 |
fcCrntPMShelfIdxThe number of the shelf on which the FC facility targeted for
PMs is provisioned. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.23.1.1 |
fcCrntPMSlotIdxThe number of the slot within which the FC facility targeted
for PMs is provisioned. INTEGER (1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.6.23.1.2 |
fcCrntPMPortIdxThe number of the port on the circuit pack on which the FC
facility targeted for PMs is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.23.1.3 |
fcCrntPMIntervalTypeIdxThe type of PM bin according to interval length. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.23.1.4 |
fcCrntPMOPRValueThe optical power received on the input of the FC facility
port.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.23.1.5 |
fcCrntPMOPRTimeStampThe date and time stamp of the optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.23.1.6 |
fcCrntPMOPRValidityIndicates the validity of the provided optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.23.1.7 |
fcCrntPMOPTValueThe optical power transmitted at the output of the FC facility
port.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.23.1.8 |
fcCrntPMOPTTimeStampThe date and time stamp of the optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.23.1.9 |
fcCrntPMOPTValidityIndicates the validity of the provided optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.23.1.10 |
fcCrntPMTempValueThe temperature measured on the FC facility port.ro INTEGER (-32768..32767) UNITS "degrees Celsius" .1.3.6.1.4.1.18070.2.2.1.6.23.1.11 |
fcCrntPMTempTimeStampThe date and time stamp of the temperature value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.23.1.12 |
fcCrntPMTempValidityIndicates the validity of the provided temperature value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.23.1.13 |
fcCrntPMSupplyVoltageValueThe supply voltage measured on the FC facility port.ro FixedX10 UNITS "mVolts/10" .1.3.6.1.4.1.18070.2.2.1.6.23.1.14 |
fcCrntPMSupplyVoltageTimeStampThe date and time stamp of the supply voltage value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.23.1.15 |
fcCrntPMSupplyVoltageValidityIndicates the validity of the provided supply voltage value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.23.1.16 |
fcCrntPMLBCValueThe laser bias current measured on the FC facility port.ro INTEGER (-32768..32767) UNITS "mAmp" .1.3.6.1.4.1.18070.2.2.1.6.23.1.17 |
fcCrntPMLBCTimeStampThe date and time stamp of the laser bias current value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.23.1.18 |
fcCrntPMLBCValidityIndicates the validity of the provided laser bias current
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.23.1.19 |
fcCrntPMCVValueThe count of Fiber Channel coding violations.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.23.1.20 |
fcCrntPMCVTimeStampThe date and time stamp of the FC coding violations value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.23.1.21 |
fcCrntPMCVValidityIndicates the validity of the provided FC coding violations
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.23.1.22 |
fcCrntPMESValueThe count of FC errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.23.1.23 |
fcCrntPMESTimeStampThe date and time stamp of the FC errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.23.1.24 |
fcCrntPMESValidityIndicates the validity of the provided FC errored seconds
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.23.1.25 |
fcCrntPMSESValueThe count of FC severely errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.23.1.26 |
fcCrntPMSESTimeStampThe date and time stamp of the FC severely errored seconds
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.23.1.27 |
fcCrntPMSESValidityIndicates the validity of the provided FC severely errored
seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.23.1.28 |
fcCrntPMCVInitializeUsed to initialize the value of the fcCrntPMCVValue object to
0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.23.1.29 |
fcCrntPMESInitializeUsed to initialize the value of the fcCrntPMESValue object to
0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.23.1.30 |
fcCrntPMSESInitializeUsed to initialize the value of the fcCrntPMSESValue object to
0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.23.1.31 |
fcCrntPMUASValueThe count of unavailable seconds. This object applies
only to transciever ports provisioned for the fiber
channel protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.23.1.32 |
fcCrntPMUASTimeStampThe date and time stamp of the unavailable seconds
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.23.1.33 |
fcCrntPMUASValidityIndicates the validity of the provided unavailable
seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.23.1.34 |
fcCrntPMUASInitializeUsed to initialize the value of the fcCrntPMUASValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.23.1.35 |
fcCrntPMOPRMinValueThe minimum optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.23.1.36 |
fcCrntPMOPRMinTimeStampThe date and time stamp of the minimum optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.23.1.37 |
fcCrntPMOPRMinValidityIndicates the validity of the provided minimum optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.23.1.38 |
fcCrntPMOPRMinInitializeUsed to initialize the value of the fcCrntPMOPRMinValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.23.1.39 |
fcCrntPMOPRMaxValueThe maximum optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.23.1.40 |
fcCrntPMOPRMaxTimeStampThe date and time stamp of the maximum optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.23.1.41 |
fcCrntPMOPRMaxValidityIndicates the validity of the provided maximum optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.23.1.42 |
fcCrntPMOPRMaxInitializeUsed to initialize the value of the fcCrntPMOPRMaxValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.23.1.43 |
fcCrntPMOPRAvgValueThe average optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.23.1.44 |
fcCrntPMOPRAvgTimeStampThe date and time stamp of the average optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.23.1.45 |
fcCrntPMOPRAvgValidityIndicates the validity of the provided average optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.23.1.46 |
fcCrntPMOPRAvgInitializeUsed to initialize the value of the fcCrntPMOPRAvgValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.23.1.47 |
fcCrntPMOPTMinValueThe minimum optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.23.1.48 |
fcCrntPMOPTMinTimeStampThe date and time stamp of the minimum optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.23.1.49 |
fcCrntPMOPTMinValidityIndicates the validity of the provided minimum optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.23.1.50 |
fcCrntPMOPTMinInitializeUsed to initialize the value of the fcCrntPMOPTMinValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.23.1.51 |
fcCrntPMOPTMaxValueThe maximum optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.23.1.52 |
fcCrntPMOPTMaxTimeStampThe date and time stamp of the maximum optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.23.1.53 |
fcCrntPMOPTMaxValidityIndicates the validity of the provided maximum optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.23.1.54 |
fcCrntPMOPTMaxInitializeUsed to initialize the value of the fcCrntPMOPTMaxValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.23.1.55 |
fcCrntPMOPTAvgValueThe average optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.23.1.56 |
fcCrntPMOPTAvgTimeStampThe date and time stamp of the average optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.23.1.57 |
fcCrntPMOPTAvgValidityIndicates the validity of the provided average optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.23.1.58 |
fcCrntPMOPTAvgInitializeUsed to initialize the value of the fcCrntPMOPTAvgValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.23.1.59 |
fcHistPMTableA table of historical performance monitoring statistics
collected for the Fiber Channel facilities on the NE. SEQUENCE OF FcHistPMEntry .1.3.6.1.4.1.18070.2.2.1.6.24 |
fcHistPMEntryThe row entry object of the Fiber Channel historical
performance monitoring table. Each row of this table contains
a full set of PM statistics and related data for a historical
measurement interval for a given Fiber Channel facility. FcHistPMEntry .1.3.6.1.4.1.18070.2.2.1.6.24.1 |
fcHistPMShelfIdxThe number of the shelf on which the FC facility targeted for
PMs is provisioned. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.24.1.1 |
fcHistPMSlotIdxThe number of the slot within which the FC facility targeted
for PMs is provisioned. INTEGER (1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.6.24.1.2 |
fcHistPMPortIdxThe number of the port on the circuit pack on which the FC
facility targeted for PMs is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.24.1.3 |
fcHistPMIntervalTypeIdxThe type of PM bin according to interval length. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.24.1.4 |
fcHistPMIntervalIdxThe specific PM bin number. The range is 1 to 96 for the
15-minute historical bins. For the 1-day historical bin, the
value is 1. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.24.1.5 |
fcHistPMOPRValueThe optical power received on the input of the FC facility
port.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.24.1.6 |
fcHistPMOPRTimeStampThe date and time stamp of the optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.24.1.7 |
fcHistPMOPRValidityIndicates the validity of the provided optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.24.1.8 |
fcHistPMOPTValueThe optical power transmitted at the output of the FC facility
port.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.24.1.9 |
fcHistPMOPTTimeStampThe date and time stamp of the optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.24.1.10 |
fcHistPMOPTValidityIndicates the validity of the provided optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.24.1.11 |
fcHistPMTempValueThe temperature measured on the FC facility port.ro INTEGER (-32768..32767) UNITS "degrees Celsius" .1.3.6.1.4.1.18070.2.2.1.6.24.1.12 |
fcHistPMTempTimeStampThe date and time stamp of the temperature value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.24.1.13 |
fcHistPMTempValidityIndicates the validity of the provided temperature value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.24.1.14 |
fcHistPMSupplyVoltageValueThe supply voltage measured on the FC facility port.ro FixedX10 UNITS "mVolts/10" .1.3.6.1.4.1.18070.2.2.1.6.24.1.15 |
fcHistPMSupplyVoltageTimeStampThe date and time stamp of the supply voltage value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.24.1.16 |
fcHistPMSupplyVoltageValidityIndicates the validity of the provided supply voltage value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.24.1.17 |
fcHistPMLBCValueThe laser bias current measured on the FC facility port.ro INTEGER (-32768..32767) UNITS "mAmp" .1.3.6.1.4.1.18070.2.2.1.6.24.1.18 |
fcHistPMLBCTimeStampThe date and time stamp of the laser bias current value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.24.1.19 |
fcHistPMLBCValidityIndicates the validity of the provided laser bias current
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.24.1.20 |
fcHistPMCVValueThe count of Fiber Channel coding violations.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.24.1.21 |
fcHistPMCVTimeStampThe date and time stamp of the FC coding violations value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.24.1.22 |
fcHistPMCVValidityIndicates the validity of the provided FC coding violations
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.24.1.23 |
fcHistPMESValueThe count of FC errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.24.1.24 |
fcHistPMESTimeStampThe date and time stamp of the FC errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.24.1.25 |
fcHistPMESValidityIndicates the validity of the provided FC errored seconds
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.24.1.26 |
fcHistPMSESValueThe count of FC severely errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.24.1.27 |
fcHistPMSESTimeStampThe date and time stamp of the FC severely errored seconds
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.24.1.28 |
fcHistPMSESValidityIndicates the validity of the provided FC severely errored
seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.24.1.29 |
fcHistPMCVInitializeUsed to initialize the value of the fcHistPMCVValue object to
0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.24.1.30 |
fcHistPMESInitializeUsed to initialize the value of the fcHistPMESValue object to
0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.24.1.31 |
fcHistPMSESInitializeUsed to initialize the value of the fcHistPMSESValue object to
0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.24.1.32 |
fcHistPMUASValueThe count of unavailable seconds. This object applies
only to transciever ports provisioned for the fiber
channel protocol.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.24.1.33 |
fcHistPMUASTimeStampThe date and time stamp of the unavailable seconds
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.24.1.34 |
fcHistPMUASValidityIndicates the validity of the provided unavailable
seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.24.1.35 |
fcHistPMUASInitializeUsed to initialize the value of the fcHistPMUASValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.24.1.36 |
fcHistPMOPRMinValueThe minimum optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.24.1.37 |
fcHistPMOPRMinTimeStampThe date and time stamp of the minimum optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.24.1.38 |
fcHistPMOPRMinValidityIndicates the validity of the provided minimum optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.24.1.39 |
fcHistPMOPRMinInitializeUsed to initialize the value of the fcHistPMOPRMinValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.24.1.40 |
fcHistPMOPRMaxValueThe maximum optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.24.1.41 |
fcHistPMOPRMaxTimeStampThe date and time stamp of the maximum optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.24.1.42 |
fcHistPMOPRMaxValidityIndicates the validity of the provided maximum optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.24.1.43 |
fcHistPMOPRMaxInitializeUsed to initialize the value of the fcHistPMOPRMaxValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.24.1.44 |
fcHistPMOPRAvgValueThe average optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.24.1.45 |
fcHistPMOPRAvgTimeStampThe date and time stamp of the average optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.24.1.46 |
fcHistPMOPRAvgValidityIndicates the validity of the provided average optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.24.1.47 |
fcHistPMOPRAvgInitializeUsed to initialize the value of the fcHistPMOPRAvgValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.24.1.48 |
fcHistPMOPTMinValueThe minimum optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.24.1.49 |
fcHistPMOPTMinTimeStampThe date and time stamp of the minimum optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.24.1.50 |
fcHistPMOPTMinValidityIndicates the validity of the provided minimum optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.24.1.51 |
fcHistPMOPTMinInitializeUsed to initialize the value of the fcHistPMOPTMinValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.24.1.52 |
fcHistPMOPTMaxValueThe maximum optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.24.1.53 |
fcHistPMOPTMaxTimeStampThe date and time stamp of the maximum optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.24.1.54 |
fcHistPMOPTMaxValidityIndicates the validity of the provided maximum optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.24.1.55 |
fcHistPMOPTMaxInitializeUsed to initialize the value of the fcHistPMOPTMaxValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.24.1.56 |
fcHistPMOPTAvgValueThe average optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.24.1.57 |
fcHistPMOPTAvgTimeStampThe date and time stamp of the average optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.24.1.58 |
fcHistPMOPTAvgValidityIndicates the validity of the provided average optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.24.1.59 |
fcHistPMOPTAvgInitializeUsed to initialize the value of the fcHistPMOPTAvgValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.24.1.60 |
fcPMThresholdTableA table of threshold levels for performance monitoring counter
values on Fiber Channel facilities, that are used in the
generation of threshold crossing alerts. SEQUENCE OF FcPMThresholdEntry .1.3.6.1.4.1.18070.2.2.1.6.25 |
fcPMThresholdEntryThe row entry object of the Fiber Channel performance
monitoring threshold table. Each row of this table contains a
set of PM thresholds for a given interval type that applies to
an individual FC facility. FcPMThresholdEntry .1.3.6.1.4.1.18070.2.2.1.6.25.1 |
fcPMThresholdShelfIdxThe shelf number on which the Fiber Channel facility targeted
for PM thresholds is provisioned. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.25.1.1 |
fcPMThresholdSlotIdxThe slot number on which the Fiber Channel facility targeted
for PM thresholds is provisioned. INTEGER (1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.6.25.1.2 |
fcPMThresholdPortIdxThe number of the port on the circuit pack on which the Fiber
Channel facility targeted for PM thresholds is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.25.1.3 |
fcPMThresholdIntervalTypeIdxThe type of PM bin according to interval length. Thresholds
are supported for the 15-minute and 1-day PM bins only. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.25.1.4 |
fcPMThresholdCVValueThe threshold for the count of Fiber Channel coding
violations.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.25.1.5 |
fcPMThresholdESValueThe threshold for the count of Fiber Channel errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.25.1.6 |
fcPMThresholdSESValueThe threshold for the count of Fiber Channel severely errored
seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.25.1.7 |
fcPMThresholdUASValueThe threshold for the count of Fiber Channel unavailable seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.25.1.8 |
ethL1IFCrntPMTableA table of current performance monitoring statistics collected
for the Ethernet Layer 1 Interface facilities on the NE. SEQUENCE OF EthL1IFCrntPMEntry .1.3.6.1.4.1.18070.2.2.1.6.26 |
ethL1IFCrntPMEntryThe row entry object of the Ethernet Layer 1 Interface current
performance monitoring table. Each row of this table contains
a full set of PM statistics and related data for a current
measurement interval for a given Ethernet Layer 1 Interface facility. EthL1IFCrntPMEntry .1.3.6.1.4.1.18070.2.2.1.6.26.1 |
ethL1IFCrntPMShelfIdxThe number of the shelf on which the Ethernet Layer 1 facility targeted for
PMs is provisioned. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.26.1.1 |
ethL1IFCrntPMSlotIdxThe number of the slot within which the Ethernet Layer 1 facility targeted
for PMs is provisioned. INTEGER (1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.6.26.1.2 |
ethL1IFCrntPMPortTypeIdxThe type of Ethernet Layer 1 port
targeted for PMs. PvxL1PortType .1.3.6.1.4.1.18070.2.2.1.6.26.1.3 |
ethL1IFCrntPMPortIdxThe number of the port of the identified type
targeted for PMs. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.26.1.4 |
ethL1IFCrntPMIntervalTypeIdxThe type of PM bin according to interval length. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.26.1.5 |
ethL1IFCrntPMOPRValueThe optical power received on the input of the Ethernet Layer 1 facility
port.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.26.1.6 |
ethL1IFCrntPMOPRTimeStampThe date and time stamp of the optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.7 |
ethL1IFCrntPMOPRValidityIndicates the validity of the provided optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.26.1.8 |
ethL1IFCrntPMOPTValueThe optical power transmitted at the output of the Ethernet Layer 1 facility
port.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.26.1.9 |
ethL1IFCrntPMOPTTimeStampThe date and time stamp of the optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.10 |
ethL1IFCrntPMOPTValidityIndicates the validity of the provided optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.26.1.11 |
ethL1IFCrntPMTempValueThe temperature measured on the Ethernet Layer 1 facility port.ro INTEGER (-32768..32767) UNITS "degrees Celsius" .1.3.6.1.4.1.18070.2.2.1.6.26.1.12 |
ethL1IFCrntPMTempTimeStampThe date and time stamp of the temperature value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.13 |
ethL1IFCrntPMTempValidityIndicates the validity of the provided temperature value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.26.1.14 |
ethL1IFCrntPMSupplyVoltageValueThe supply voltage measured on the Ethernet Layer 1 facility port.ro FixedX10 UNITS "mVolts/10" .1.3.6.1.4.1.18070.2.2.1.6.26.1.15 |
ethL1IFCrntPMSupplyVoltageTimeStampThe date and time stamp of the supply voltage value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.16 |
ethL1IFCrntPMSupplyVoltageValidityIndicates the validity of the provided supply voltage value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.26.1.17 |
ethL1IFCrntPMSupplyVoltage2ValueA second supply voltage value measured on the Ethernet Layer 1 facility port.
This object is available only for XFP-equipped Ethernet Interface ports.ro FixedX10 UNITS "mVolts/10" .1.3.6.1.4.1.18070.2.2.1.6.26.1.18 |
ethL1IFCrntPMSupplyVoltage2TimeStampThe date and time stamp of the second supply voltage value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.19 |
ethL1IFCrntPMSupplyVoltage2ValidityIndicates the validity of the provided second supply voltage value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.26.1.20 |
ethL1IFCrntPMLBCValueThe laser bias current measured on the Ethernet Layer 1 facility port.ro INTEGER (-32768..32767) UNITS "mAmp" .1.3.6.1.4.1.18070.2.2.1.6.26.1.21 |
ethL1IFCrntPMLBCTimeStampThe date and time stamp of the laser bias current value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.22 |
ethL1IFCrntPMLBCValidityIndicates the validity of the provided laser bias current
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.26.1.23 |
ethL1IFCrntPMCVValueThe count of 8B/10B coding violations. This object is only available
on Gigabit Ethernet ports.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.26.1.24 |
ethL1IFCrntPMCVTimeStampThe date and time stamp of the coding violations value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.25 |
ethL1IFCrntPMCVValidityIndicates the validity of the provided coding violations
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.26.1.26 |
ethL1IFCrntPMCVInitializeUsed to initialize the value of the ethL1IFCrntPMCVValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.26.1.27 |
ethL1IFCrntPMINVBLKValueThe count of invalid blocks. This object is only available
on 10 Gigabit Ethernet ports.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.26.1.28 |
ethL1IFCrntPMINVBLKTimeStampThe date and time stamp of the invalid blocks value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.29 |
ethL1IFCrntPMINVBLKValidityIndicates the validity of the provided invalid blocks
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.26.1.30 |
ethL1IFCrntPMINVBLKInitializeUsed to initialize the value of the ethL1IFCrntPMINVBLKValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.26.1.31 |
ethL1IFCrntPMESValueThe count of Ethernet Layer 1 errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.26.1.32 |
ethL1IFCrntPMESTimeStampThe date and time stamp of the Ethernet Layer 1 errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.33 |
ethL1IFCrntPMESValidityIndicates the validity of the provided Ethernet Layer 1 errored seconds
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.26.1.34 |
ethL1IFCrntPMESInitializeUsed to initialize the value of the ethL1IFCrntPMESValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.26.1.35 |
ethL1IFCrntPMSESValueThe count of Ethernet Layer 1 severely errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.26.1.36 |
ethL1IFCrntPMSESTimeStampThe date and time stamp of the Ethernet Layer 1 severely errored seconds
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.37 |
ethL1IFCrntPMSESValidityIndicates the validity of the provided Ethernet Layer 1 severely errored
seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.26.1.38 |
ethL1IFCrntPMSESInitializeUsed to initialize the value of the ethL1IFCrntPMSESValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.26.1.39 |
ethL1IFCrntPMOTUEBValueThe count of OTU digital wrapper layer errored blocks.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.26.1.40 |
ethL1IFCrntPMOTUEBTimeStampThe date and time stamp of the OTU digital wrapper layer
errored blocks value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.41 |
ethL1IFCrntPMOTUEBValidityIndicates the validity of the provided OTU digital wrapper
layer errored blocks value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.26.1.42 |
ethL1IFCrntPMOTUEBInitializeUsed to initialize the value of the ethL1IFCrntPMOTUEBValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.26.1.43 |
ethL1IFCrntPMOTUBBEValueThe count of OTU digital wrapper layer background block
errors.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.26.1.44 |
ethL1IFCrntPMOTUBBETimeStampThe date and time stamp of the OTU digital wrapper layer
background block errors value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.45 |
ethL1IFCrntPMOTUBBEValidityIndicates the validity of the provided OTU digital wrapper
layer background block errors value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.26.1.46 |
ethL1IFCrntPMOTUBBEInitializeUsed to initialize the value of the ethL1IFCrntPMOTUBBEValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.26.1.47 |
ethL1IFCrntPMOTUESValueThe count of OTU digital wrapper layer errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.26.1.48 |
ethL1IFCrntPMOTUESTimeStampThe date and time stamp of the OTU digital wrapper layer
errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.49 |
ethL1IFCrntPMOTUESValidityIndicates the validity of the provided OTU digital wrapper
layer errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.26.1.50 |
ethL1IFCrntPMOTUESInitializeUsed to initialize the value of the ethL1IFCrntPMOTUESValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.26.1.51 |
ethL1IFCrntPMOTUSESValueThe count of OTU digital wrapper layer severely errored
seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.26.1.52 |
ethL1IFCrntPMOTUSESTimeStampThe date and time stamp of the OTU digital wrapper layer
severely errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.53 |
ethL1IFCrntPMOTUSESValidityIndicates the validity of the provided OTU digital wrapper
layer severely errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.26.1.54 |
ethL1IFCrntPMOTUSESInitializeUsed to initialize the value of the ethL1IFCrntPMOTUSESValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.26.1.55 |
ethL1IFCrntPMOTUOFSValueThe count of OTU digital wrapper layer out-of-frame seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.26.1.56 |
ethL1IFCrntPMOTUOFSTimeStampThe date and time stamp of the OTU digital wrapper layer
out-of-frame seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.57 |
ethL1IFCrntPMOTUOFSValidityIndicates the validity of the provided OTU digital wrapper
layer out-of-frame seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.26.1.58 |
ethL1IFCrntPMOTUOFSInitializeUsed to initialize the value of the ethL1IFCrntPMOTUOFSValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.26.1.59 |
ethL1IFCrntPMNBITCRValueThe count of the number of bits corrected. This object
applies only to xGigE line ports provisioned for OTN line
mapping with Forward Eror Correction (FEC).rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.26.1.60 |
ethL1IFCrntPMNBITCRTimeStampThe date and time stamp of the number of bits corrected
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.61 |
ethL1IFCrntPMNBITCRValidityIndicates the validity of the provided number of bits
corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.26.1.62 |
ethL1IFCrntPMNBITCRInitializeUsed to initialize the value of the ethL1IFCrntPMNBITCRValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.26.1.63 |
ethL1IFCrntPMNBYTCRValueThe count of the number of bytes corrected. This object
applies only to xGigE line ports provisioned for OTN line
mapping with Forward Eror Correction (FEC).rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.26.1.64 |
ethL1IFCrntPMNBYTCRTimeStampThe date and time stamp of the number of bytes corrected
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.65 |
ethL1IFCrntPMNBYTCRValidityIndicates the validity of the provided number of bytes
corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.26.1.66 |
ethL1IFCrntPMNBYTCRInitializeUsed to initialize the value of the ethL1IFCrntPMNBYTCRValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.26.1.67 |
ethL1IFCrntPMUNCRCDWValueThe count of uncorrectable codewords. This object
applies only to xGigE line ports provisioned for OTN line
mapping with Forward Eror Correction (FEC).rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.26.1.68 |
ethL1IFCrntPMUNCRCDWTimeStampThe date and time stamp of the uncorrectable codewords value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.69 |
ethL1IFCrntPMUNCRCDWValidityIndicates the validity of the provided uncorrectable codewords
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.26.1.70 |
ethL1IFCrntPMUNCRCDWInitializeUsed to initialize the value of the ethL1IFCrntPMUNCRCDWValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.26.1.71 |
ethL1IFCrntPMOTNBERValueThe instantaneous BER of the line port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.72 |
ethL1IFCrntPMOTNBERTimeStampThe date and time stamp of the instantaneous BER.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.73 |
ethL1IFCrntPMOTNBERValidityIndicates the validity of the provided instantaneous BER.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.26.1.74 |
ethL1IFCrntPMOTNBERInitializeUsed to initialize the value of the ethL1IFCrntPMOTNBERValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.26.1.75 |
ethL1IFCrntPMOTNAVGBERValueThe interval/average BER of the line port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.76 |
ethL1IFCrntPMOTNAVGBERTimeStampThe date and time stamp of the interval/average BER.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.77 |
ethL1IFCrntPMOTNAVGBERValidityIndicates the validity of the provided interval/average BER.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.26.1.78 |
ethL1IFCrntPMOTNAVGBERInitializeUsed to initialize the value of the ethL1IFCrntPMOTNAVGBERValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.26.1.79 |
ethL1IFCrntPMNBITCR64BitValueThe 64-bit count of the number of bits corrected. This object
applies only to xGigE line ports provisioned for OTN line
mapping with Forward Eror Correction (FEC).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.26.1.80 |
ethL1IFCrntPMNBITCR64BitTimeStampThe date and time stamp of the 64-bit number of bits corrected
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.81 |
ethL1IFCrntPMNBITCR64BitValidityIndicates the validity of the provided 64-bit number of bits
corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.26.1.82 |
ethL1IFCrntPMNBITCR64BitInitializeUsed to initialize the value of the ethL1IFCrntPMNBITCR64BitValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.26.1.83 |
ethL1IFCrntPMNBYTCR64BitValueThe 64-bit count of the number of bytes corrected. This object
applies only to xGigE line ports provisioned for OTN line
mapping with Forward Eror Correction (FEC).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.26.1.84 |
ethL1IFCrntPMNBYTCR64BitTimeStampThe date and time stamp of the 64-bit number of bytes corrected
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.85 |
ethL1IFCrntPMNBYTCR64BitValidityIndicates the validity of the provided 64-bit number of bytes
corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.26.1.86 |
ethL1IFCrntPMNBYTCR64BitInitializeUsed to initialize the value of the ethL1IFCrntPMNBYTCR64BitValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.26.1.87 |
ethL1IFCrntPMUASValueThe count of unavailable seconds. This object is only available
on Gigabit Ethernet ports.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.26.1.88 |
ethL1IFCrntPMUASTimeStampThe date and time stamp of the unavailable seconds
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.89 |
ethL1IFCrntPMUASValidityIndicates the validity of the provided unavailable
seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.26.1.90 |
ethL1IFCrntPMUASInitializeUsed to initialize the value of the ethL1IFCrntPMUASValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.26.1.91 |
ethL1IFCrntPMOTUUASValueThe count of OTU digital wrapper layer unavailable seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.26.1.92 |
ethL1IFCrntPMOTUUASTimeStampThe date and time stamp of the OTU digital wrapper layer
unavailable seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.93 |
ethL1IFCrntPMOTUUASValidityIndicates the validity of the provided OTU digital wrapper
layer unavailable seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.26.1.94 |
ethL1IFCrntPMOTUUASInitializeUsed to initialize the value of the ethL1IFCrntPMOTUUASValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.26.1.95 |
ethL1IFCrntPMOPRMinValueThe minimum optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.26.1.96 |
ethL1IFCrntPMOPRMinTimeStampThe date and time stamp of the minimum optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.97 |
ethL1IFCrntPMOPRMinValidityIndicates the validity of the provided minimum optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.26.1.98 |
ethL1IFCrntPMOPRMinInitializeUsed to initialize the value of the ethL1IFCrntPMOPRMinValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.26.1.99 |
ethL1IFCrntPMOPRMaxValueThe maximum optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.26.1.100 |
ethL1IFCrntPMOPRMaxTimeStampThe date and time stamp of the maximum optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.101 |
ethL1IFCrntPMOPRMaxValidityIndicates the validity of the provided maximum optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.26.1.102 |
ethL1IFCrntPMOPRMaxInitializeUsed to initialize the value of the ethL1IFCrntPMOPRMaxValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.26.1.103 |
ethL1IFCrntPMOPRAvgValueThe average optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.26.1.104 |
ethL1IFCrntPMOPRAvgTimeStampThe date and time stamp of the average optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.105 |
ethL1IFCrntPMOPRAvgValidityIndicates the validity of the provided average optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.26.1.106 |
ethL1IFCrntPMOPRAvgInitializeUsed to initialize the value of the ethL1IFCrntPMOPRAvgValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.26.1.107 |
ethL1IFCrntPMOPTMinValueThe minimum optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.26.1.108 |
ethL1IFCrntPMOPTMinTimeStampThe date and time stamp of the minimum optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.109 |
ethL1IFCrntPMOPTMinValidityIndicates the validity of the provided minimum optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.26.1.110 |
ethL1IFCrntPMOPTMinInitializeUsed to initialize the value of the ethL1IFCrntPMOPTMinValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.26.1.111 |
ethL1IFCrntPMOPTMaxValueThe maximum optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.26.1.112 |
ethL1IFCrntPMOPTMaxTimeStampThe date and time stamp of the maximum optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.113 |
ethL1IFCrntPMOPTMaxValidityIndicates the validity of the provided maximum optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.26.1.114 |
ethL1IFCrntPMOPTMaxInitializeUsed to initialize the value of the ethL1IFCrntPMOPTMaxValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.26.1.115 |
ethL1IFCrntPMOPTAvgValueThe average optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.26.1.116 |
ethL1IFCrntPMOPTAvgTimeStampThe date and time stamp of the average optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.26.1.117 |
ethL1IFCrntPMOPTAvgValidityIndicates the validity of the provided average optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.26.1.118 |
ethL1IFCrntPMOPTAvgInitializeUsed to initialize the value of the ethL1IFCrntPMOPTAvgValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.26.1.119 |
ethL1IFHistPMTableA table of historical performance monitoring statistics collected
for the Ethernet Layer 1 Interface facilities on the NE. SEQUENCE OF EthL1IFHistPMEntry .1.3.6.1.4.1.18070.2.2.1.6.27 |
ethL1IFHistPMEntryThe row entry object of the Ethernet Layer 1 Interface historical
performance monitoring table. Each row of this table contains
a full set of PM statistics and related data for a historical
measurement interval for a given Ethernet Layer 1 Interface facility. EthL1IFHistPMEntry .1.3.6.1.4.1.18070.2.2.1.6.27.1 |
ethL1IFHistPMShelfIdxThe number of the shelf on which the Ethernet Layer 1 facility targeted for
PMs is provisioned. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.27.1.1 |
ethL1IFHistPMSlotIdxThe number of the slot within which the Ethernet Layer 1 facility targeted
for PMs is provisioned. INTEGER (1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.6.27.1.2 |
ethL1IFHistPMPortTypeIdxThe type of Ethernet Layer 1 port
targeted for PMs. PvxL1PortType .1.3.6.1.4.1.18070.2.2.1.6.27.1.3 |
ethL1IFHistPMPortIdxThe number of the port of the identified type
targeted for PMs. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.27.1.4 |
ethL1IFHistPMIntervalTypeIdxThe type of PM bin according to interval length. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.27.1.5 |
ethL1IFHistPMIntervalIdxThe specific PM bin number. The range is 1..96 for 15-minute
bins, and for 1-day historical bins, the value is 1. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.27.1.6 |
ethL1IFHistPMOPRValueThe optical power received on the input of the Ethernet Layer 1 facility
port.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.27.1.7 |
ethL1IFHistPMOPRTimeStampThe date and time stamp of the optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.8 |
ethL1IFHistPMOPRValidityIndicates the validity of the provided optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.27.1.9 |
ethL1IFHistPMOPTValueThe optical power transmitted at the output of the Ethernet Layer 1 facility
port.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.27.1.10 |
ethL1IFHistPMOPTTimeStampThe date and time stamp of the optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.11 |
ethL1IFHistPMOPTValidityIndicates the validity of the provided optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.27.1.12 |
ethL1IFHistPMTempValueThe temperature measured on the Ethernet Layer 1 facility port.ro INTEGER (-32768..32767) UNITS "degrees Celsius" .1.3.6.1.4.1.18070.2.2.1.6.27.1.13 |
ethL1IFHistPMTempTimeStampThe date and time stamp of the temperature value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.14 |
ethL1IFHistPMTempValidityIndicates the validity of the provided temperature value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.27.1.15 |
ethL1IFHistPMSupplyVoltageValueThe supply voltage measured on the Ethernet Layer 1 facility port.ro FixedX10 UNITS "mVolts/10" .1.3.6.1.4.1.18070.2.2.1.6.27.1.16 |
ethL1IFHistPMSupplyVoltageTimeStampThe date and time stamp of the supply voltage value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.17 |
ethL1IFHistPMSupplyVoltageValidityIndicates the validity of the provided supply voltage value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.27.1.18 |
ethL1IFHistPMSupplyVoltage2ValueA second supply voltage value measured on the Ethernet Layer 1 facility port.
This object is available only for XFP-equipped Ethernet Interface ports.ro FixedX10 UNITS "mVolts/10" .1.3.6.1.4.1.18070.2.2.1.6.27.1.19 |
ethL1IFHistPMSupplyVoltage2TimeStampThe date and time stamp of the second supply voltage value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.20 |
ethL1IFHistPMSupplyVoltage2ValidityIndicates the validity of the provided second supply voltage value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.27.1.21 |
ethL1IFHistPMLBCValueThe laser bias current measured on the Ethernet Layer 1 facility port.ro INTEGER (-32768..32767) UNITS "mAmp" .1.3.6.1.4.1.18070.2.2.1.6.27.1.22 |
ethL1IFHistPMLBCTimeStampThe date and time stamp of the laser bias current value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.23 |
ethL1IFHistPMLBCValidityIndicates the validity of the provided laser bias current
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.27.1.24 |
ethL1IFHistPMCVValueThe count of 8B/10B coding violations. This object is only available
on Gigabit Ethernet ports.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.27.1.25 |
ethL1IFHistPMCVTimeStampThe date and time stamp of the coding violations value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.26 |
ethL1IFHistPMCVValidityIndicates the validity of the provided coding violations
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.27.1.27 |
ethL1IFHistPMCVInitializeUsed to initialize the value of the ethL1IFHistPMCVValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.27.1.28 |
ethL1IFHistPMINVBLKValueThe count of invalid blocks. This object is only available
on 10 Gigabit Ethernet ports.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.27.1.29 |
ethL1IFHistPMINVBLKTimeStampThe date and time stamp of the invalid blocks value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.30 |
ethL1IFHistPMINVBLKValidityIndicates the validity of the provided invalid blocks
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.27.1.31 |
ethL1IFHistPMINVBLKInitializeUsed to initialize the value of the ethL1IFHistPMINVBLKValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.27.1.32 |
ethL1IFHistPMESValueThe count of Ethernet Layer 1 errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.27.1.33 |
ethL1IFHistPMESTimeStampThe date and time stamp of the Ethernet Layer 1 errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.34 |
ethL1IFHistPMESValidityIndicates the validity of the provided Ethernet Layer 1 errored seconds
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.27.1.35 |
ethL1IFHistPMESInitializeUsed to initialize the value of the ethL1IFHistPMESValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.27.1.36 |
ethL1IFHistPMSESValueThe count of Ethernet Layer 1 severely errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.27.1.37 |
ethL1IFHistPMSESTimeStampThe date and time stamp of the Ethernet Layer 1 severely errored seconds
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.38 |
ethL1IFHistPMSESValidityIndicates the validity of the provided Ethernet Layer 1 severely errored
seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.27.1.39 |
ethL1IFHistPMSESInitializeUsed to initialize the value of the ethL1IFHistPMSESValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.27.1.40 |
ethL1IFHistPMOTUEBValueThe count of OTU digital wrapper layer errored blocks.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.27.1.41 |
ethL1IFHistPMOTUEBTimeStampThe date and time stamp of the OTU digital wrapper layer
errored blocks value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.42 |
ethL1IFHistPMOTUEBValidityIndicates the validity of the provided OTU digital wrapper
layer errored blocks value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.27.1.43 |
ethL1IFHistPMOTUEBInitializeUsed to initialize the value of the ethL1IFHistPMOTUEBValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.27.1.44 |
ethL1IFHistPMOTUBBEValueThe count of OTU digital wrapper layer background block
errors.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.27.1.45 |
ethL1IFHistPMOTUBBETimeStampThe date and time stamp of the OTU digital wrapper layer
background block errors value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.46 |
ethL1IFHistPMOTUBBEValidityIndicates the validity of the provided OTU digital wrapper
layer background block errors value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.27.1.47 |
ethL1IFHistPMOTUBBEInitializeUsed to initialize the value of the ethL1IFHistPMOTUBBEValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.27.1.48 |
ethL1IFHistPMOTUESValueThe count of OTU digital wrapper layer errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.27.1.49 |
ethL1IFHistPMOTUESTimeStampThe date and time stamp of the OTU digital wrapper layer
errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.50 |
ethL1IFHistPMOTUESValidityIndicates the validity of the provided OTU digital wrapper
layer errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.27.1.51 |
ethL1IFHistPMOTUESInitializeUsed to initialize the value of the ethL1IFHistPMOTUESValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.27.1.52 |
ethL1IFHistPMOTUSESValueThe count of OTU digital wrapper layer severely errored
seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.27.1.53 |
ethL1IFHistPMOTUSESTimeStampThe date and time stamp of the OTU digital wrapper layer
severely errored seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.54 |
ethL1IFHistPMOTUSESValidityIndicates the validity of the provided OTU digital wrapper
layer severely errored seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.27.1.55 |
ethL1IFHistPMOTUSESInitializeUsed to initialize the value of the ethL1IFHistPMOTUSESValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.27.1.56 |
ethL1IFHistPMOTUOFSValueThe count of OTU digital wrapper layer out-of-frame seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.27.1.57 |
ethL1IFHistPMOTUOFSTimeStampThe date and time stamp of the OTU digital wrapper layer
out-of-frame seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.58 |
ethL1IFHistPMOTUOFSValidityIndicates the validity of the provided OTU digital wrapper
layer out-of-frame seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.27.1.59 |
ethL1IFHistPMOTUOFSInitializeUsed to initialize the value of the ethL1IFHistPMOTUOFSValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.27.1.60 |
ethL1IFHistPMNBITCRValueThe count of the number of bits corrected.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.27.1.61 |
ethL1IFHistPMNBITCRTimeStampThe date and time stamp of the number of bits corrected
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.62 |
ethL1IFHistPMNBITCRValidityIndicates the validity of the provided number of bits
corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.27.1.63 |
ethL1IFHistPMNBITCRInitializeUsed to initialize the value of the ethL1IFHistPMNBITCRValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.27.1.64 |
ethL1IFHistPMNBYTCRValueThe count of the number of bytes corrected. This object
applies only to OC-192 line port provisioned for OTN line
mapping.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.27.1.65 |
ethL1IFHistPMNBYTCRTimeStampThe date and time stamp of the number of bytes corrected
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.66 |
ethL1IFHistPMNBYTCRValidityIndicates the validity of the provided number of bytes
corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.27.1.67 |
ethL1IFHistPMNBYTCRInitializeUsed to initialize the value of the ethL1IFHistPMNBYTCRValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.27.1.68 |
ethL1IFHistPMUNCRCDWValueThe count of uncorrectable codewords. This object applies only
to OC-192 line port provisioned for OTN line mapping.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.27.1.69 |
ethL1IFHistPMUNCRCDWTimeStampThe date and time stamp of the uncorrectable codewords value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.70 |
ethL1IFHistPMUNCRCDWValidityIndicates the validity of the provided uncorrectable codewords
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.27.1.71 |
ethL1IFHistPMUNCRCDWInitializeUsed to initialize the value of the ethL1IFHistPMUNCRCDWValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.27.1.72 |
ethL1IFHistPMOTNBERValueThe instantaneous BER of the line port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.73 |
ethL1IFHistPMOTNBERTimeStampThe date and time stamp of the instantaneous BER.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.74 |
ethL1IFHistPMOTNBERValidityIndicates the validity of the provided instantaneous BER.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.27.1.75 |
ethL1IFHistPMOTNBERInitializeUsed to initialize the value of the ethL1IFHistPMOTNBERValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.27.1.76 |
ethL1IFHistPMOTNAVGBERValueThe interval/average BER of the line port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.77 |
ethL1IFHistPMOTNAVGBERTimeStampThe date and time stamp of the interval/average BER.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.78 |
ethL1IFHistPMOTNAVGBERValidityIndicates the validity of the provided interval/average BER.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.27.1.79 |
ethL1IFHistPMOTNAVGBERInitializeUsed to initialize the value of the ethL1IFHistPMOTNAVGBERValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.27.1.80 |
ethL1IFHistPMNBITCR64BitValueThe 64-bit count of the number of bits corrected. This object
applies only to xGigE line ports provisioned for OTN line
mapping with Forward Eror Correction (FEC).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.27.1.81 |
ethL1IFHistPMNBITCR64BitTimeStampThe date and time stamp of the 64-bit number of bits corrected
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.82 |
ethL1IFHistPMNBITCR64BitValidityIndicates the validity of the provided 64-bit number of bits
corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.27.1.83 |
ethL1IFHistPMNBITCR64BitInitializeUsed to initialize the value of the ethL1IFHistPMNBITCR64BitValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.27.1.84 |
ethL1IFHistPMNBYTCR64BitValueThe 64-bit count of the number of bytes corrected. This object
applies only to xGigE line ports provisioned for OTN line
mapping with Forward Eror Correction (FEC).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.27.1.85 |
ethL1IFHistPMNBYTCR64BitTimeStampThe date and time stamp of the 64-bit number of bytes corrected
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.86 |
ethL1IFHistPMNBYTCR64BitValidityIndicates the validity of the provided 64-bit number of bytes
corrected value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.27.1.87 |
ethL1IFHistPMNBYTCR64BitInitializeUsed to initialize the value of the ethL1IFHistPMNBYTCR64BitValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.27.1.88 |
ethL1IFHistPMUASValueThe count of unavailable seconds. This object is only available
on Gigabit Ethernet ports.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.27.1.89 |
ethL1IFHistPMUASTimeStampThe date and time stamp of the unavailable seconds
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.90 |
ethL1IFHistPMUASValidityIndicates the validity of the provided unavailable
seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.27.1.91 |
ethL1IFHistPMUASInitializeUsed to initialize the value of the ethL1IFHistPMUASValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.27.1.92 |
ethL1IFHistPMOTUUASValueThe count of OTU digital wrapper layer unavailable seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.27.1.93 |
ethL1IFHistPMOTUUASTimeStampThe date and time stamp of the OTU digital wrapper layer
unavailable seconds value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.94 |
ethL1IFHistPMOTUUASValidityIndicates the validity of the provided OTU digital wrapper
layer unavailable seconds value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.27.1.95 |
ethL1IFHistPMOTUUASInitializeUsed to initialize the value of the ethL1IFHistPMOTUUASValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.27.1.96 |
ethL1IFHistPMOPRMinValueThe minimum optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.27.1.97 |
ethL1IFHistPMOPRMinTimeStampThe date and time stamp of the minimum optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.98 |
ethL1IFHistPMOPRMinValidityIndicates the validity of the provided minimum optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.27.1.99 |
ethL1IFHistPMOPRMinInitializeUsed to initialize the value of the ethL1IFHistPMOPRMinValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.27.1.100 |
ethL1IFHistPMOPRMaxValueThe maximum optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.27.1.101 |
ethL1IFHistPMOPRMaxTimeStampThe date and time stamp of the maximum optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.102 |
ethL1IFHistPMOPRMaxValidityIndicates the validity of the provided maximum optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.27.1.103 |
ethL1IFHistPMOPRMaxInitializeUsed to initialize the value of the ethL1IFHistPMOPRMaxValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.27.1.104 |
ethL1IFHistPMOPRAvgValueThe average optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.27.1.105 |
ethL1IFHistPMOPRAvgTimeStampThe date and time stamp of the average optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.106 |
ethL1IFHistPMOPRAvgValidityIndicates the validity of the provided average optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.27.1.107 |
ethL1IFHistPMOPRAvgInitializeUsed to initialize the value of the ethL1IFHistPMOPRAvgValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.27.1.108 |
ethL1IFHistPMOPTMinValueThe minimum optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.27.1.109 |
ethL1IFHistPMOPTMinTimeStampThe date and time stamp of the minimum optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.110 |
ethL1IFHistPMOPTMinValidityIndicates the validity of the provided minimum optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.27.1.111 |
ethL1IFHistPMOPTMinInitializeUsed to initialize the value of the ethL1IFHistPMOPTMinValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.27.1.112 |
ethL1IFHistPMOPTMaxValueThe maximum optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.27.1.113 |
ethL1IFHistPMOPTMaxTimeStampThe date and time stamp of the maximum optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.114 |
ethL1IFHistPMOPTMaxValidityIndicates the validity of the provided maximum optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.27.1.115 |
ethL1IFHistPMOPTMaxInitializeUsed to initialize the value of the ethL1IFHistPMOPTMaxValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.27.1.116 |
ethL1IFHistPMOPTAvgValueThe average optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.27.1.117 |
ethL1IFHistPMOPTAvgTimeStampThe date and time stamp of the average optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.27.1.118 |
ethL1IFHistPMOPTAvgValidityIndicates the validity of the provided average optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.27.1.119 |
ethL1IFHistPMOPTAvgInitializeUsed to initialize the value of the ethL1IFHistPMOPTAvgValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.27.1.120 |
ethL1IFPMThresholdTableA table of threshold levels for performance monitoring counter
values on Ethernet Layer 1 facilities, that are used in the
generation of threshold crossing alerts. SEQUENCE OF EthL1IFPMThresholdEntry .1.3.6.1.4.1.18070.2.2.1.6.28 |
ethL1IFPMThresholdEntryThe row entry object of the Ethernet Layer 1 performance
monitoring threshold table. Each row of this table contains a
set of PM thresholds for a given interval type that applies to
an individual Ethernet Layer 1 facility. EthL1IFPMThresholdEntry .1.3.6.1.4.1.18070.2.2.1.6.28.1 |
ethL1IFPMThresholdShelfIdxThe shelf number on which the Ethernet Layer 1 facility
targeted for PM thresholds is provisioned. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.28.1.1 |
ethL1IFPMThresholdSlotIdxThe slot number on which the Ethernet Layer 1 facility
targeted for PM thresholds is provisioned. INTEGER (1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.6.28.1.2 |
ethL1IFPMThresholdPortTypeIdxThe type of Ethernet Layer 1 port
targeted for PM thresholds. PvxL1PortType .1.3.6.1.4.1.18070.2.2.1.6.28.1.3 |
ethL1IFPMThresholdPortIdxThe number of the port of the identified type
targeted for PM thresholds. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.28.1.4 |
ethL1IFPMThresholdIntervalTypeIdxThe type of PM bin according to interval length. Thresholds
are supported for the 15-minute and 1-day PM bins only. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.28.1.5 |
ethL1IFPMThresholdCVValueThe threshold for the count of 8B/10B coding
violations. This object is only available
on Gigabit Ethernet ports.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.28.1.6 |
ethL1IFPMThresholdINVBLKValueThe threshold for the count of invalid blocks.
This object is only available
on 10 Gigabit Ethernet ports.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.28.1.7 |
ethL1IFPMThresholdESValueThe threshold for the count of errored
seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.28.1.8 |
ethL1IFPMThresholdSESValueThe threshold for the count of severely
errored seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.28.1.9 |
ethL1IFPMThresholdOTUEBValueThe threshold for the count of errored blocks at the OTU
digital wrapper layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.28.1.10 |
ethL1IFPMThresholdOTUBBEValueThe threshold for the count of background block errors at the
OTU digital wrapper layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.28.1.11 |
ethL1IFPMThresholdOTUESValueThe threshold for the count of errored seconds at the OTU
digital wrapper layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.28.1.12 |
ethL1IFPMThresholdOTUSESValueThe threshold for the count of severely errored seconds at the
OTU digital wrapper layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.28.1.13 |
ethL1IFPMThresholdOTUOFSValueThe threshold for the count of out-of-frame seconds at the OTU
digital wrapper layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.28.1.14 |
ethL1IFPMThresholdUNCRCDWValueThe threshold for the count of uncorrectable codewords.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.28.1.15 |
ethL1IFPMThresholdUASValueThe threshold for the count of unavailable seconds.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.28.1.16 |
ethL1IFPMThresholdOTUUASValueThe threshold for the count of unavailable seconds at the
OTU digital wrapper layer.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.28.1.17 |
pvxL2IFCrntPMTableA table of current performance monitoring statistics collected
for the PacketVX Layer2 interfaces on the NE. SEQUENCE OF PvxL2IFCrntPMEntry .1.3.6.1.4.1.18070.2.2.1.6.29 |
pvxL2IFCrntPMEntryThe row entry object of the PacketVX Layer 2 current
performance monitoring table. Each row of this table contains
a full set of PM statistics and related data for a current
measurement interval for a given PVX Layer 2 interface facility. PvxL2IFCrntPMEntry .1.3.6.1.4.1.18070.2.2.1.6.29.1 |
pvxL2IFCrntPMSwitchIdxThe identifier of the ethernet switch instance on which
the Layer 2 Interface facilitiy is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.29.1.1 |
pvxL2IFCrntPMShelfIdxThe number of the shelf on which the PVX Layer2 IF targeted for
PMs is provisioned. For LAG entities, the shelf number is 0. INTEGER (0|1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.29.1.2 |
pvxL2IFCrntPMSlotIdxThe number of the slot within which the PVX Layer2 IF targeted
for PMs is provisioned. For LAG entities, the slot number is 0. INTEGER (0|1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.6.29.1.3 |
pvxL2IFCrntPMPortTypeIdxThe type of PacketVX port on which the Layer 2 Interface facility
is provisioned. PvxPortType .1.3.6.1.4.1.18070.2.2.1.6.29.1.4 |
pvxL2IFCrntPMPortIdxThe number of the port of the identified type on which the PVX Layer 2 IF
facility targeted for PMs is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.29.1.5 |
pvxL2IFCrntPMIntervalTypeIdxThe type of PM bin according to interval length. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.29.1.6 |
pvxL2IFCrntPMTFRCRXValueThe total received frame count receieved on the interface.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.29.1.7 |
pvxL2IFCrntPMTFRCRXTimeStampThe date and time stamp of the total received frame count
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.29.1.8 |
pvxL2IFCrntPMTFRCRXValidityIndicates the validity of the provided total received frame
count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.29.1.9 |
pvxL2IFCrntPMTFRCRXInitializeUsed to initialize the value of the pvxL2IFCrntPMTFRCRXValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.29.1.10 |
pvxL2IFCrntPMTFRCTXValueThe total transmitted frame count on the interface.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.29.1.11 |
pvxL2IFCrntPMTFRCTXTimeStampThe date and time stamp of the total transmitted frame
count value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.29.1.12 |
pvxL2IFCrntPMTFRCTXValidityIndicates the validity of the provided total transmitted
frame count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.29.1.13 |
pvxL2IFCrntPMTFRCTXInitializeUsed to initialize the value of the pvxL2IFCrntPMTFRCTXValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.29.1.14 |
pvxL2IFCrntPMFRDRValueThe count of discarded frames on the interface.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.29.1.15 |
pvxL2IFCrntPMFRDRTimeStampThe date and time stamp of the discarded frames value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.29.1.16 |
pvxL2IFCrntPMFRDRValidityIndicates the validity of the provided discarded frames
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.29.1.17 |
pvxL2IFCrntPMFRDRInitializeUsed to initialize the value of the pvxL2IFCrntPMFRDRValue object
to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.29.1.18 |
pvxL2IFCrntPMFCSEValueThe count of frame checksum errors on the interface.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.29.1.19 |
pvxL2IFCrntPMFCSETimeStampThe date and time stamp of the frame checksum errors value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.29.1.20 |
pvxL2IFCrntPMFCSEValidityIndicates the validity of the provided frame checksum errors
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.29.1.21 |
pvxL2IFCrntPMFCSEInitializeUsed to initialize the value of the pvxL2IFCrntPMFCSEValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.29.1.22 |
pvxL2IFCrntPMTBYCRXValueThe total received byte count on the interface.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.29.1.23 |
pvxL2IFCrntPMTBYCRXTimeStampThe date and time stamp of the total received byte count
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.29.1.24 |
pvxL2IFCrntPMTBYCRXValidityIndicates the validity of the provided total received byte
count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.29.1.25 |
pvxL2IFCrntPMTBYCRXInitializeUsed to initialize the value of the pvxL2IFCrntPMTBYCRXValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.29.1.26 |
pvxL2IFCrntPMTBYCTXValueThe total transmitted byte count on the interface.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.29.1.27 |
pvxL2IFCrntPMTBYCTXTimeStampThe date and time stamp of the total transmitted byte count
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.29.1.28 |
pvxL2IFCrntPMTBYCTXValidityIndicates the validity of the provided Ftotal transmitted byte
count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.29.1.29 |
pvxL2IFCrntPMTBYCTXInitializeUsed to initialize the value of the pvxL2IFCrntPMTBYCTXValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.29.1.30 |
pvxL2IFCrntPMBCSTValueThe total number of good frames received that were directed to
the broadcast address. Note that this does not include
multicast frames.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.29.1.31 |
pvxL2IFCrntPMBCSTTimeStampThe date and time stamp of the broadcast packets received
count value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.29.1.32 |
pvxL2IFCrntPMBCSTValidityIndicates the validity of the provided broadcast packets
received count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.29.1.33 |
pvxL2IFCrntPMBCSTInitializeUsed to initialize the value of the pvxL2IFCrntPMBCSTValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.29.1.34 |
pvxL2IFCrntPMMCSTValueThe total number of good frames received that were directed to
a multicast address. Note that this number does not include
frames directed to the broadcast address.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.29.1.35 |
pvxL2IFCrntPMMCSTTimeStampThe date and time stamp of the multicast packets received
count value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.29.1.36 |
pvxL2IFCrntPMMCSTValidityIndicates the validity of the provided multicast packets
received count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.29.1.37 |
pvxL2IFCrntPMMCSTInitializeUsed to initialize the value of the pvxL2IFCrntPMMCSTValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.29.1.38 |
pvxL2IFCrntPMSIZE64ValueThe total number of 64 byte frames received (excluding framing
bits but including FCS octets).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.29.1.39 |
pvxL2IFCrntPMSIZE64TimeStampThe date and time stamp of the count of 64-byte packets
received.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.29.1.40 |
pvxL2IFCrntPMSIZE64ValidityIndicates the validity of the provided count of 64-byte
packets packets received.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.29.1.41 |
pvxL2IFCrntPMSIZE64InitializeUsed to initialize the value of the pvxL2IFCrntPMSIZE64Value
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.29.1.42 |
pvxL2IFCrntPMSIZE65To127ValueThe total number of frames received that are 65 to 127 bytes
inclusive in length (excluding framing bits but including FCS
octets).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.29.1.43 |
pvxL2IFCrntPMSIZE65To127TimeStampThe date and time stamp of the count of packets between 65 and
127 bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.29.1.44 |
pvxL2IFCrntPMSIZE65To127ValidityIndicates the validity of the provided count of packets
between 65 and 127 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.29.1.45 |
pvxL2IFCrntPMSIZE65To127InitializeUsed to initialize the value of the
pvxL2IFCrntPMSIZE65To127Value object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.29.1.46 |
pvxL2IFCrntPMSIZE128To255ValueThe total number of frames received that are 128 to 255 bytes
inclusive in length (excluding framing bits but including FCS
octets).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.29.1.47 |
pvxL2IFCrntPMSIZE128To255TimeStampThe date and time stamp of the count of packets between 128
and 255 bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.29.1.48 |
pvxL2IFCrntPMSIZE128To255ValidityIndicates the validity of the provided count of packets
between 128 and 255 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.29.1.49 |
pvxL2IFCrntPMSIZE128To255InitializeUsed to initialize the value of the
pvxL2IFCrntPMSIZE128To255Value object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.29.1.50 |
pvxL2IFCrntPMSIZE256To511ValueThe total number of frames received that are 256 to 511 bytes
inclusive in length (excluding framing bits but including FCS
octets).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.29.1.51 |
pvxL2IFCrntPMSIZE256To511TimeStampThe date and time stamp of the count of packets between 256
and 511 bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.29.1.52 |
pvxL2IFCrntPMSIZE256To511ValidityIndicates the validity of the provided count of packets
between 256 and 511 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.29.1.53 |
pvxL2IFCrntPMSIZE256To511InitializeUsed to initialize the value of the
pvxL2IFCrntPMSIZE256To511Value object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.29.1.54 |
pvxL2IFCrntPMSIZE512To1023ValueThe total number of frames received that are 512 to 1023 bytes
inclusive in length (excluding framing bits but including FCS
octets).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.29.1.55 |
pvxL2IFCrntPMSIZE512To1023TimeStampThe date and time stamp of the count of packets between 512
and 1023 bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.29.1.56 |
pvxL2IFCrntPMSIZE512To1023ValidityIndicates the validity of the provided count of packets
between 512 and 1023 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.29.1.57 |
pvxL2IFCrntPMSIZE512To1023InitializeUsed to initialize the value of the
pvxL2IFCrntPMSIZE512To1023Value object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.29.1.58 |
pvxL2IFCrntPMSIZE1024To1518ValueThe total number of frames received that are 1024 to 1518
bytes inclusive in length (excluding framing bits but
including FCS octets).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.29.1.59 |
pvxL2IFCrntPMSIZE1024To1518TimeStampThe date and time stamp of the count of packets between 1024
and 1518 bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.29.1.60 |
pvxL2IFCrntPMSIZE1024To1518ValidityIndicates the validity of the provided count of packets
between 1024 and 1518 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.29.1.61 |
pvxL2IFCrntPMSIZE1024To1518InitializeUsed to initialize the value of the
pvxL2IFCrntPMSIZE1024To1518Value object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.29.1.62 |
pvxL2IFCrntPMSIZEOver1518ValueThe total number of frames received that are greater than or
equal to 1519 bytes in length (excluding framing bits but
including FCS octets).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.29.1.63 |
pvxL2IFCrntPMSIZEOver1518TimeStampThe date and time stamp of the count of packets over 1518
bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.29.1.64 |
pvxL2IFCrntPMSIZEOver1518ValidityIndicates the validity of the provided count of packets over
1518 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.29.1.65 |
pvxL2IFCrntPMSIZEOver1518InitializeUsed to initialize the value of the
pvxL2IFCrntPMSIZEOver1518Value object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.29.1.66 |
pvxL2IFCrntPMTPFCRXValueThe total received pause frame count on the interface.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.29.1.67 |
pvxL2IFCrntPMTPFCRXTimeStampThe date and time stamp of the total received pause frame
count value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.29.1.68 |
pvxL2IFCrntPMTPFCRXValidityIndicates the validity of the provided total received pause
frame count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.29.1.69 |
pvxL2IFCrntPMTPFCRXInitializeUsed to initialize the value of the pvxL2IFCrntPMTPFCRXValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.29.1.70 |
pvxL2IFCrntPMTPFCTXValueThe total transmitted pause frame count on the interface.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.29.1.71 |
pvxL2IFCrntPMTPFCTXTimeStampThe date and time stamp of the total transmitted pause frame
count value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.29.1.72 |
pvxL2IFCrntPMTPFCTXValidityIndicates the validity of the provided total transmitted pause
frame count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.29.1.73 |
pvxL2IFCrntPMTPFCTXInitializeUsed to initialize the value of the pvxL2IFCrntPMTPFCTXValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.29.1.74 |
pvxL2IFCrntPMUSIZEValueThe total number of frames received that were less than 64
octets long (excluding framing bits, but including FCS octets)
and were otherwise well formed.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.29.1.75 |
pvxL2IFCrntPMUSIZETimeStampThe date and time stamp of the count of undersized packets.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.29.1.76 |
pvxL2IFCrntPMUSIZEValidityIndicates the validity of the provided count of undersized
packets.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.29.1.77 |
pvxL2IFCrntPMUSIZEInitializeUsed to initialize the value of the pvxL2IFCrntPMUSIZEValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.29.1.78 |
pvxL2IFCrntPMOSIZEValueThe total number of frames received that were longer than 9600
octets (excluding framing bits, but including FCS octets) and
were otherwise well formed.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.29.1.79 |
pvxL2IFCrntPMOSIZETimeStampThe date and time stamp of the count of oversized packets.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.29.1.80 |
pvxL2IFCrntPMOSIZEValidityIndicates the validity of the provided count of oversized
packets.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.29.1.81 |
pvxL2IFCrntPMOSIZEInitializeUsed to initialize the value of the pvxL2IFCrntPMOSIZEValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.29.1.82 |
pvxL2IFCrntPMFRGTValueThe total number of frames received that were less than 64
octets in length (excluding framing bits but including FCS
octets) and had either a bad Frame Check Sequence (FCS) with
an integral number of octets (FCS Error) or a bad FCS with a
non-integral number of octets (Alignment Error).rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.29.1.83 |
pvxL2IFCrntPMFRGTTimeStampThe date and time stamp of the count of received packet
fragments.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.29.1.84 |
pvxL2IFCrntPMFRGTValidityIndicates the validity of the provided count of received
packet fragments.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.29.1.85 |
pvxL2IFCrntPMFRGTInitializeUsed to initialize the value of the pvxL2IFCrntPMFRGTValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.29.1.86 |
pvxL2IFHistPMTableA table of historical performance monitoring statistics
collected for the PacketVX Layer2 interfaces on the NE. SEQUENCE OF PvxL2IFHistPMEntry .1.3.6.1.4.1.18070.2.2.1.6.30 |
pvxL2IFHistPMEntryThe row entry object of the PacketVX Layer 2 historical
performance monitoring table. Each row of this table contains
a full set of PM statistics and related data for a historical
measurement interval for a given PVX Layer 2 interface
facility. PvxL2IFHistPMEntry .1.3.6.1.4.1.18070.2.2.1.6.30.1 |
pvxL2IFHistPMSwitchIdxThe identifier of the ethernet switch instance on which the
Layer 2 Interface facilitiy is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.30.1.1 |
pvxL2IFHistPMShelfIdxThe number of the shelf on which the PVX Layer2 IF targeted
for PMs is provisioned. For LAG entities, the shelf number is 0. INTEGER (0|1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.30.1.2 |
pvxL2IFHistPMSlotIdxThe number of the slot within which the PVX Layer2 IF targeted
for PMs is provisioned. For LAG entities, the slot number is 0. INTEGER (0|1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.6.30.1.3 |
pvxL2IFHistPMPortTypeIdxThe type of PacketVX port on which the Layer 2 Interface
facility is provisioned. PvxPortType .1.3.6.1.4.1.18070.2.2.1.6.30.1.4 |
pvxL2IFHistPMPortIdxThe number of the port of the identified type on which the PVX
Layer 2 IF facility targeted for PMs is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.30.1.5 |
pvxL2IFHistPMIntervalTypeIdxThe type of PM bin according to interval length. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.30.1.6 |
pvxL2IFHistPMIntervalIdxThe specific PM bin number. The range is 1 to 96 for the
15-minute historical bins. For the 1-day historical bin, the
value is 1. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.30.1.7 |
pvxL2IFHistPMTFRCRXValueThe total received frame count receieved on the interface.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.30.1.8 |
pvxL2IFHistPMTFRCRXTimeStampThe date and time stamp of the total received frame count
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.30.1.9 |
pvxL2IFHistPMTFRCRXValidityIndicates the validity of the provided total received frame
count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.30.1.10 |
pvxL2IFHistPMTFRCRXInitializeUsed to initialize the value of the pvxL2IFHistPMTFRCRXValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.30.1.11 |
pvxL2IFHistPMTFRCTXValueThe total transmitted frame count on the interface.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.30.1.12 |
pvxL2IFHistPMTFRCTXTimeStampThe date and time stamp of the total transmitted frame count
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.30.1.13 |
pvxL2IFHistPMTFRCTXValidityIndicates the validity of the provided total transmitted frame
count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.30.1.14 |
pvxL2IFHistPMTFRCTXInitializeUsed to initialize the value of the pvxL2IFHistPMTFRCTXValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.30.1.15 |
pvxL2IFHistPMFRDRValueThe count of discarded frames on the interface.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.30.1.16 |
pvxL2IFHistPMFRDRTimeStampThe date and time stamp of the discarded frames value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.30.1.17 |
pvxL2IFHistPMFRDRValidityIndicates the validity of the provided discarded frames
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.30.1.18 |
pvxL2IFHistPMFRDRInitializeUsed to initialize the value of the pvxL2IFHistPMFRDRValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.30.1.19 |
pvxL2IFHistPMFCSEValueThe count of frame checksum errors on the interface.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.30.1.20 |
pvxL2IFHistPMFCSETimeStampThe date and time stamp of the frame checksum errors value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.30.1.21 |
pvxL2IFHistPMFCSEValidityIndicates the validity of the provided frame checksum errors
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.30.1.22 |
pvxL2IFHistPMFCSEInitializeUsed to initialize the value of the pvxL2IFHistPMFCSEValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.30.1.23 |
pvxL2IFHistPMTBYCRXValueThe total received byte count on the interface.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.30.1.24 |
pvxL2IFHistPMTBYCRXTimeStampThe date and time stamp of the total received byte count
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.30.1.25 |
pvxL2IFHistPMTBYCRXValidityIndicates the validity of the provided total received byte
count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.30.1.26 |
pvxL2IFHistPMTBYCRXInitializeUsed to initialize the value of the pvxL2IFHistPMTBYCRXValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.30.1.27 |
pvxL2IFHistPMTBYCTXValueThe total transmitted byte count on the interface.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.30.1.28 |
pvxL2IFHistPMTBYCTXTimeStampThe date and time stamp of the total transmitted byte count
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.30.1.29 |
pvxL2IFHistPMTBYCTXValidityIndicates the validity of the provided Ftotal transmitted byte
count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.30.1.30 |
pvxL2IFHistPMTBYCTXInitializeUsed to initialize the value of the pvxL2IFHistPMTBYCTXValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.30.1.31 |
pvxL2IFHistPMBCSTValueThe total number of good frames received that were directed to
the broadcast address. Note that this does not include
multicast frames.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.30.1.32 |
pvxL2IFHistPMBCSTTimeStampThe date and time stamp of the broadcast packets received
count value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.30.1.33 |
pvxL2IFHistPMBCSTValidityIndicates the validity of the provided broadcast packets
received count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.30.1.34 |
pvxL2IFHistPMBCSTInitializeUsed to initialize the value of the pvxL2IFHistPMBCSTValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.30.1.35 |
pvxL2IFHistPMMCSTValueThe total number of good frames received that were directed to
a multicast address. Note that this number does not include
frames directed to the broadcast address.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.30.1.36 |
pvxL2IFHistPMMCSTTimeStampThe date and time stamp of the multicast packets received
count value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.30.1.37 |
pvxL2IFHistPMMCSTValidityIndicates the validity of the provided multicast packets
received count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.30.1.38 |
pvxL2IFHistPMMCSTInitializeUsed to initialize the value of the pvxL2IFHistPMMCSTValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.30.1.39 |
pvxL2IFHistPMSIZE64ValueThe total number of 64 byte frames received (excluding framing
bits but including FCS octets).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.30.1.40 |
pvxL2IFHistPMSIZE64TimeStampThe date and time stamp of the count of 64-byte packets
received.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.30.1.41 |
pvxL2IFHistPMSIZE64ValidityIndicates the validity of the provided count of 64-byte
packets packets received.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.30.1.42 |
pvxL2IFHistPMSIZE64InitializeUsed to initialize the value of the pvxL2IFHistPMSIZE64Value
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.30.1.43 |
pvxL2IFHistPMSIZE65To127ValueThe total number of frames received that are 65 to 127 bytes
inclusive in length (excluding framing bits but including FCS
octets).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.30.1.44 |
pvxL2IFHistPMSIZE65To127TimeStampThe date and time stamp of the count of packets between 65 and
127 bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.30.1.45 |
pvxL2IFHistPMSIZE65To127ValidityIndicates the validity of the provided count of packets
between 65 and 127 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.30.1.46 |
pvxL2IFHistPMSIZE65To127InitializeUsed to initialize the value of the
pvxL2IFHistPMSIZE65To127Value object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.30.1.47 |
pvxL2IFHistPMSIZE128To255ValueThe total number of frames received that are 128 to 255 bytes
inclusive in length (excluding framing bits but including FCS
octets).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.30.1.48 |
pvxL2IFHistPMSIZE128To255TimeStampThe date and time stamp of the count of packets between 128
and 255 bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.30.1.49 |
pvxL2IFHistPMSIZE128To255ValidityIndicates the validity of the provided count of packets
between 128 and 255 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.30.1.50 |
pvxL2IFHistPMSIZE128To255InitializeUsed to initialize the value of the
pvxL2IFHistPMSIZE128To255Value object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.30.1.51 |
pvxL2IFHistPMSIZE256To511ValueThe total number of frames received that are 256 to 511 bytes
inclusive in length (excluding framing bits but including FCS
octets).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.30.1.52 |
pvxL2IFHistPMSIZE256To511TimeStampThe date and time stamp of the count of packets between 256
and 511 bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.30.1.53 |
pvxL2IFHistPMSIZE256To511ValidityIndicates the validity of the provided count of packets
between 256 and 511 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.30.1.54 |
pvxL2IFHistPMSIZE256To511InitializeUsed to initialize the value of the
pvxL2IFHistPMSIZE256To511Value object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.30.1.55 |
pvxL2IFHistPMSIZE512To1023ValueThe total number of frames received that are 512 to 1023 bytes
inclusive in length (excluding framing bits but including FCS
octets).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.30.1.56 |
pvxL2IFHistPMSIZE512To1023TimeStampThe date and time stamp of the count of packets between 512
and 1023 bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.30.1.57 |
pvxL2IFHistPMSIZE512To1023ValidityIndicates the validity of the provided count of packets
between 512 and 1023 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.30.1.58 |
pvxL2IFHistPMSIZE512To1023InitializeUsed to initialize the value of the
pvxL2IFHistPMSIZE512To1023Value object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.30.1.59 |
pvxL2IFHistPMSIZE1024To1518ValueThe total number of frames received that are 1024 to 1518
bytes inclusive in length (excluding framing bits but
including FCS octets).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.30.1.60 |
pvxL2IFHistPMSIZE1024To1518TimeStampThe date and time stamp of the count of packets between 1024
and 1518 bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.30.1.61 |
pvxL2IFHistPMSIZE1024To1518ValidityIndicates the validity of the provided count of packets
between 1024 and 1518 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.30.1.62 |
pvxL2IFHistPMSIZE1024To1518InitializeUsed to initialize the value of the
pvxL2IFHistPMSIZE1024To1518Value object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.30.1.63 |
pvxL2IFHistPMSIZEOver1518ValueThe total number of frames received that are greater than or
equal to 1519 bytes in length (excluding framing bits but
including FCS octets).ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.30.1.64 |
pvxL2IFHistPMSIZEOver1518TimeStampThe date and time stamp of the count of packets over 1518
bytes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.30.1.65 |
pvxL2IFHistPMSIZEOver1518ValidityIndicates the validity of the provided count of packets over
1518 bytes.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.30.1.66 |
pvxL2IFHistPMSIZEOver1518InitializeUsed to initialize the value of the
pvxL2IFHistPMSIZEOver1518Value object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.30.1.67 |
pvxL2IFHistPMTPFCRXValueThe total received pause frame count on the interface.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.30.1.68 |
pvxL2IFHistPMTPFCRXTimeStampThe date and time stamp of the total received pause frame
count value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.30.1.69 |
pvxL2IFHistPMTPFCRXValidityIndicates the validity of the provided total received pause
frame count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.30.1.70 |
pvxL2IFHistPMTPFCRXInitializeUsed to initialize the value of the pvxL2IFHistPMTPFCRXValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.30.1.71 |
pvxL2IFHistPMTPFCTXValueThe total transmitted pause frame count on the interface.ro Unsigned64 .1.3.6.1.4.1.18070.2.2.1.6.30.1.72 |
pvxL2IFHistPMTPFCTXTimeStampThe date and time stamp of the total transmitted pause frame
count value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.30.1.73 |
pvxL2IFHistPMTPFCTXValidityIndicates the validity of the provided total transmitted pause
frame count value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.30.1.74 |
pvxL2IFHistPMTPFCTXInitializeUsed to initialize the value of the pvxL2IFHistPMTPFCTXValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.30.1.75 |
pvxL2IFHistPMUSIZEValueThe total number of frames received that were less than 64
octets long (excluding framing bits, but including FCS octets)
and were otherwise well formed.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.30.1.76 |
pvxL2IFHistPMUSIZETimeStampThe date and time stamp of the count of undersized packets.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.30.1.77 |
pvxL2IFHistPMUSIZEValidityIndicates the validity of the provided count of undersized
packets.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.30.1.78 |
pvxL2IFHistPMUSIZEInitializeUsed to initialize the value of the pvxL2IFHistPMUSIZEValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.30.1.79 |
pvxL2IFHistPMOSIZEValueThe total number of frames received that were longer than 9600
octets (excluding framing bits, but including FCS octets) and
were otherwise well formed.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.30.1.80 |
pvxL2IFHistPMOSIZETimeStampThe date and time stamp of the count of oversized packets.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.30.1.81 |
pvxL2IFHistPMOSIZEValidityIndicates the validity of the provided count of oversized
packets.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.30.1.82 |
pvxL2IFHistPMOSIZEInitializeUsed to initialize the value of the pvxL2IFHistPMOSIZEValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.30.1.83 |
pvxL2IFHistPMFRGTValueThe total number of frames received that were less than 64
octets in length (excluding framing bits but including FCS
octets) and had either a bad Frame Check Sequence (FCS) with
an integral number of octets (FCS Error) or a bad FCS with a
non-integral number of octets (Alignment Error).rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.30.1.84 |
pvxL2IFHistPMFRGTTimeStampThe date and time stamp of the count of received packet
fragments.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.30.1.85 |
pvxL2IFHistPMFRGTValidityIndicates the validity of the provided count of received
packet fragments.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.30.1.86 |
pvxL2IFHistPMFRGTInitializeUsed to initialize the value of the pvxL2IFHistPMFRGTValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.30.1.87 |
pvxL2IFPMThresholdTableA table of threshold levels for performance monitoring counter
values on PVX Layer 2 IF facilities, that are used in the
generation of threshold crossing alerts. SEQUENCE OF PvxL2IFPMThresholdEntry .1.3.6.1.4.1.18070.2.2.1.6.31 |
pvxL2IFPMThresholdEntryThe row entry object of the PacketVX Layer 2 Interface
performance monitoring threshold table. Each row of this table
contains a set of PM thresholds for a given interval type that
applies to an individual PVX Layer 2 IF facility. PvxL2IFPMThresholdEntry .1.3.6.1.4.1.18070.2.2.1.6.31.1 |
pvxL2IFPMThresholdSwitchIdxThe identifier of the ethernet switch instance on which the
Layer 2 Interface facilitiy is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.31.1.1 |
pvxL2IFPMThresholdShelfIdxThe number of the shelf on which the PVX Layer2 IF targeted
for PM thresholds is provisioned. For LAG entities, the shelf number is 0. INTEGER (0|1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.31.1.2 |
pvxL2IFPMThresholdSlotIdxThe number of the slot within which the PVX Layer2 IF targeted
for PM thresholds is provisioned. For LAG entities, the slot number is 0. INTEGER (0|1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.6.31.1.3 |
pvxL2IFPMThresholdPortTypeIdxThe type of PacketVX port on which the Layer 2 Interface
facility is provisioned. PvxPortType .1.3.6.1.4.1.18070.2.2.1.6.31.1.4 |
pvxL2IFPMThresholdPortIdxThe number of the port of the identified type on which the PVX
Layer 2 IF facility targeted for PM thresholds is
provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.31.1.5 |
pvxL2IFPMThresholdIntervalTypeIdxThe type of PM bin according to interval length. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.31.1.6 |
pvxL2IFPMThresholdFRDRValueThe threshold for the count of discarded frames on the
interface.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.31.1.7 |
pvxL2IFPMThresholdFCSEValueThe threshold for the count of frame checksum errors on the
interface.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.31.1.8 |
pvxL2IFPMThresholdUSIZEValueThe threshold for the count of undersized frames.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.31.1.9 |
pvxL2IFPMThresholdOSIZEValueThe threshold for the count of oversized frames.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.31.1.10 |
pvxL2IFPMThresholdFRGTValueThe threshold for the count of fragmented frames.rw Unsigned32 .1.3.6.1.4.1.18070.2.2.1.6.31.1.11 |
briCrntPMTableA table of current performance monitoring statistics collected
for the Bit Rate Independent (BRI) facilities on the NE. SEQUENCE OF BriCrntPMEntry .1.3.6.1.4.1.18070.2.2.1.6.38 |
briCrntPMEntryThe row entry object of the BRI current performance
monitoring table. Each row of this table contains a full set
of PM statistics and related data for a current measurement
interval for a given BRI facility. BriCrntPMEntry .1.3.6.1.4.1.18070.2.2.1.6.38.1 |
briCrntPMShelfIdxThe number of the shelf on which the BRI facility targeted for
PMs is provisioned. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.38.1.1 |
briCrntPMSlotIdxThe number of the slot within which the BRI facility targeted
for PMs is provisioned. INTEGER (1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.6.38.1.2 |
briCrntPMPortIdxThe number of the port on the circuit pack on which the BRI
facility targeted for PMs is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.38.1.3 |
briCrntPMIntervalTypeIdxThe type of BRI bin according to interval length. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.38.1.4 |
briCrntPMOPRValueThe optical power received on the input of the BRI facility
port.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.38.1.5 |
briCrntPMOPRTimeStampThe date and time stamp of the optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.38.1.6 |
briCrntPMOPRValidityIndicates the validity of the provided optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.38.1.7 |
briCrntPMOPTValueThe optical power transmitted at the output of the BRI facility
port.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.38.1.8 |
briCrntPMOPTTimeStampThe date and time stamp of the optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.38.1.9 |
briCrntPMOPTValidityIndicates the validity of the provided optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.38.1.10 |
briCrntPMTempValueThe temperature measured on the BRI facility port.ro INTEGER (-32768..32767) UNITS "degrees Celsius" .1.3.6.1.4.1.18070.2.2.1.6.38.1.11 |
briCrntPMTempTimeStampThe date and time stamp of the temperature value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.38.1.12 |
briCrntPMTempValidityIndicates the validity of the provided temperature value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.38.1.13 |
briCrntPMSupplyVoltageValueThe supply voltage measured on the BRI facility port.ro FixedX10 UNITS "mVolts/10" .1.3.6.1.4.1.18070.2.2.1.6.38.1.14 |
briCrntPMSupplyVoltageTimeStampThe date and time stamp of the supply voltage value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.38.1.15 |
briCrntPMSupplyVoltageValidityIndicates the validity of the provided supply voltage value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.38.1.16 |
briCrntPMLBCValueThe laser bias current measured on the BRI facility port.ro INTEGER (-32768..32767) UNITS "mAmp" .1.3.6.1.4.1.18070.2.2.1.6.38.1.17 |
briCrntPMLBCTimeStampThe date and time stamp of the laser bias current value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.38.1.18 |
briCrntPMLBCValidityIndicates the validity of the provided laser bias current
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.38.1.19 |
briCrntPMOPRMinValueThe minimum optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.38.1.20 |
briCrntPMOPRMinTimeStampThe date and time stamp of the minimum optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.38.1.21 |
briCrntPMOPRMinValidityIndicates the validity of the provided minimum optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.38.1.22 |
briCrntPMOPRMinInitializeUsed to initialize the value of the briCrntPMOPRMinValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.38.1.23 |
briCrntPMOPRMaxValueThe maximum optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.38.1.24 |
briCrntPMOPRMaxTimeStampThe date and time stamp of the maximum optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.38.1.25 |
briCrntPMOPRMaxValidityIndicates the validity of the provided maximum optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.38.1.26 |
briCrntPMOPRMaxInitializeUsed to initialize the value of the briCrntPMOPRMaxValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.38.1.27 |
briCrntPMOPRAvgValueThe average optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.38.1.28 |
briCrntPMOPRAvgTimeStampThe date and time stamp of the average optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.38.1.29 |
briCrntPMOPRAvgValidityIndicates the validity of the provided average optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.38.1.30 |
briCrntPMOPRAvgInitializeUsed to initialize the value of the briCrntPMOPRAvgValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.38.1.31 |
briCrntPMOPTMinValueThe minimum optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.38.1.32 |
briCrntPMOPTMinTimeStampThe date and time stamp of the minimum optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.38.1.33 |
briCrntPMOPTMinValidityIndicates the validity of the provided minimum optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.38.1.34 |
briCrntPMOPTMinInitializeUsed to initialize the value of the briCrntPMOPTMinValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.38.1.35 |
briCrntPMOPTMaxValueThe maximum optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.38.1.36 |
briCrntPMOPTMaxTimeStampThe date and time stamp of the maximum optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.38.1.37 |
briCrntPMOPTMaxValidityIndicates the validity of the provided maximum optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.38.1.38 |
briCrntPMOPTMaxInitializeUsed to initialize the value of the briCrntPMOPTMaxValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.38.1.39 |
briCrntPMOPTAvgValueThe average optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.38.1.40 |
briCrntPMOPTAvgTimeStampThe date and time stamp of the average optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.38.1.41 |
briCrntPMOPTAvgValidityIndicates the validity of the provided average optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.38.1.42 |
briCrntPMOPTAvgInitializeUsed to initialize the value of the briCrntPMOPTAvgValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.38.1.43 |
briHistPMTableA table of historical performance monitoring statistics
collected for the Bit Rate Independent (BRI) facilities
on the NE. SEQUENCE OF BriHistPMEntry .1.3.6.1.4.1.18070.2.2.1.6.39 |
briHistPMEntryThe row entry object of the BRI historical
performance monitoring table. Each row of this table contains
a full set of PM statistics and related data for a historical
measurement interval for a given BRI facility. BriHistPMEntry .1.3.6.1.4.1.18070.2.2.1.6.39.1 |
briHistPMShelfIdxThe number of the shelf on which the BRI facility targeted for
PMs is provisioned. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.39.1.1 |
briHistPMSlotIdxThe number of the slot within which the BRI facility targeted
for PMs is provisioned. INTEGER (1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.6.39.1.2 |
briHistPMPortIdxThe number of the port on the circuit pack on which the BRI
facility targeted for PMs is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.39.1.3 |
briHistPMIntervalTypeIdxThe type of PM bin according to interval length. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.39.1.4 |
briHistPMIntervalIdxThe specific PM bin number. The range is 1 to 96 for the
15-minute historical bins. For the 1-day historical bin, the
value is 1. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.39.1.5 |
briHistPMOPRValueThe optical power received on the input of the BRI facility
port.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.39.1.6 |
briHistPMOPRTimeStampThe date and time stamp of the optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.39.1.7 |
briHistPMOPRValidityIndicates the validity of the provided optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.39.1.8 |
briHistPMOPTValueThe optical power transmitted at the output of the BRI facility
port.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.39.1.9 |
briHistPMOPTTimeStampThe date and time stamp of the optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.39.1.10 |
briHistPMOPTValidityIndicates the validity of the provided optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.39.1.11 |
briHistPMTempValueThe temperature measured on the BRI facility port.ro INTEGER (-32768..32767) UNITS "degrees Celsius" .1.3.6.1.4.1.18070.2.2.1.6.39.1.12 |
briHistPMTempTimeStampThe date and time stamp of the temperature value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.39.1.13 |
briHistPMTempValidityIndicates the validity of the provided temperature value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.39.1.14 |
briHistPMSupplyVoltageValueThe supply voltage measured on the BRI facility port.ro FixedX10 UNITS "mVolts/10" .1.3.6.1.4.1.18070.2.2.1.6.39.1.15 |
briHistPMSupplyVoltageTimeStampThe date and time stamp of the supply voltage value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.39.1.16 |
briHistPMSupplyVoltageValidityIndicates the validity of the provided supply voltage value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.39.1.17 |
briHistPMLBCValueThe laser bias current measured on the BRI facility port.ro INTEGER (-32768..32767) UNITS "mAmp" .1.3.6.1.4.1.18070.2.2.1.6.39.1.18 |
briHistPMLBCTimeStampThe date and time stamp of the laser bias current value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.39.1.19 |
briHistPMLBCValidityIndicates the validity of the provided laser bias current
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.39.1.20 |
briHistPMOPRMinValueThe minimum optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.39.1.21 |
briHistPMOPRMinTimeStampThe date and time stamp of the minimum optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.39.1.22 |
briHistPMOPRMinValidityIndicates the validity of the provided minimum optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.39.1.23 |
briHistPMOPRMinInitializeUsed to initialize the value of the briHistPMOPRMinValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.39.1.24 |
briHistPMOPRMaxValueThe maximum optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.39.1.25 |
briHistPMOPRMaxTimeStampThe date and time stamp of the maximum optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.39.1.26 |
briHistPMOPRMaxValidityIndicates the validity of the provided maximum optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.39.1.27 |
briHistPMOPRMaxInitializeUsed to initialize the value of the briHistPMOPRMaxValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.39.1.28 |
briHistPMOPRAvgValueThe average optical power received on the input of the transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.39.1.29 |
briHistPMOPRAvgTimeStampThe date and time stamp of the average optical power received value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.39.1.30 |
briHistPMOPRAvgValidityIndicates the validity of the provided average optical power received
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.39.1.31 |
briHistPMOPRAvgInitializeUsed to initialize the value of the briHistPMOPRAvgValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.39.1.32 |
briHistPMOPTMinValueThe minimum optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.39.1.33 |
briHistPMOPTMinTimeStampThe date and time stamp of the minimum optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.39.1.34 |
briHistPMOPTMinValidityIndicates the validity of the provided minimum optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.39.1.35 |
briHistPMOPTMinInitializeUsed to initialize the value of the briHistPMOPTMinValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.39.1.36 |
briHistPMOPTMaxValueThe maximum optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.39.1.37 |
briHistPMOPTMaxTimeStampThe date and time stamp of the maximum optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.39.1.38 |
briHistPMOPTMaxValidityIndicates the validity of the provided maximum optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.39.1.39 |
briHistPMOPTMaxInitializeUsed to initialize the value of the briHistPMOPTMaxValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.39.1.40 |
briHistPMOPTAvgValueThe average optical power transmitted at the output of the
transceiver.ro FixedX10 UNITS "dBm/10" .1.3.6.1.4.1.18070.2.2.1.6.39.1.41 |
briHistPMOPTAvgTimeStampThe date and time stamp of the average optical power transmitted
value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.39.1.42 |
briHistPMOPTAvgValidityIndicates the validity of the provided average optical power
transmitted value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.39.1.43 |
briHistPMOPTAvgInitializeUsed to initialize the value of the briHistPMOPTAvgValue
object to 0.rw InitializeCmd .1.3.6.1.4.1.18070.2.2.1.6.39.1.44 |
cpCrntPMTableA table of current performance monitoring statistics collected
for the circuit packs on the NE. SEQUENCE OF CpCrntPMEntry .1.3.6.1.4.1.18070.2.2.1.6.49 |
cpCrntPMEntryThe row entry object of the equipment current
performance monitoring table. Each row of this table contains
a full set of PM statistics and related data for a current
measurement interval for a given circuit pack. CpCrntPMEntry .1.3.6.1.4.1.18070.2.2.1.6.49.1 |
cpCrntPMCpTypeIdxThe type of the circuit pack targeted for PM retrieval. CpType .1.3.6.1.4.1.18070.2.2.1.6.49.1.1 |
cpCrntPMShelfIdxThe number of the shelf on which the circuit pack targeted for
PMs is provisioned. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.49.1.2 |
cpCrntPMSlotIdxThe number of the slot within which the circuit pack
targeted for PMs is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.49.1.3 |
cpCrntPMIntervalTypeIdxThe type of PM bin according to interval length. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.49.1.4 |
cpCrntPMTempValueThe circuit pack temperature.ro INTEGER (-32768..32767) UNITS "degrees Celsius" .1.3.6.1.4.1.18070.2.2.1.6.49.1.5 |
cpCrntPMTempTimeStampThe date and time stamp of the temperature value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.49.1.6 |
cpCrntPMTempValidityIndicates the validity of the provided temperature
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.49.1.7 |
cpHistPMTableA table of historical performance monitoring statistics
collected for the circuit packs on the NE. SEQUENCE OF CpHistPMEntry .1.3.6.1.4.1.18070.2.2.1.6.50 |
cpHistPMEntryThe row entry object of the circuit pack historical
performance monitoring table. Each row of this table contains
a full set of PM statistics and related data for a historical
measurement interval for a given circuit pack. CpHistPMEntry .1.3.6.1.4.1.18070.2.2.1.6.50.1 |
cpHistPMCpTypeIdxThe type of the circuit pack targeted for PM retrieval. CpType .1.3.6.1.4.1.18070.2.2.1.6.50.1.1 |
cpHistPMShelfIdxThe number of the shelf on which the circuit pack targeted for
PMs is provisioned. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.6.50.1.2 |
cpHistPMSlotIdxThe number of the slot within which the circuit pack
targeted for PMs is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.50.1.3 |
cpHistPMIntervalTypeIdxThe type of PM bin according to interval length. PMIntervalType .1.3.6.1.4.1.18070.2.2.1.6.50.1.4 |
cpHistPMIntervalIdxThe specific PM bin number. The range is 1..96 for 15-minute
bins, and for 1-day historical bins, the value is 1. INTEGER .1.3.6.1.4.1.18070.2.2.1.6.50.1.5 |
cpHistPMTempValueThe circuit pack temperature.ro INTEGER (-32768..32767) UNITS "degrees Celsius" .1.3.6.1.4.1.18070.2.2.1.6.50.1.6 |
cpHistPMTempTimeStampThe date and time stamp of the temperature value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.6.50.1.7 |
cpHistPMTempValidityIndicates the validity of the provided temperature
value.ro PMValidity .1.3.6.1.4.1.18070.2.2.1.6.50.1.8 |
conditions OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.7 |
notifObjects OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.7.1 |
condDateAndTimeThis object is used in Trap messages to indicate the date and
time at which the condition or alarm reported in the Trap
message occurred.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.7.1.1 |
condReportTypeIndicates if this is a condition (non-alarmed) or an alarm.
This object is used solely for reporting the condition report
type in Trap messages.ro CondReportType .1.3.6.1.4.1.18070.2.2.1.7.1.2 |
condSeverityIndicates the severity of the condition or alarm. This object
is used solely for reporting the condition severity in Trap
messages.ro CondSeverity .1.3.6.1.4.1.18070.2.2.1.7.1.3 |
condServiceAffectingIndicates if the presence of this active condition or alarm
impacts the ability of the equipment to provide service as
expected. This object is used solely for reporting whether or
not a condition is service affecting in Trap messages.ro CondServiceAffecting .1.3.6.1.4.1.18070.2.2.1.7.1.4 |
condDescriptionA textual decription of the condition or alarm. This object is
used solely for reporting the condition description in Trap
messages.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.7.1.5 |
condObjectTypeIdentifies the type of managed object against which the
condition or alarm is raised.ro NotifObjectType .1.3.6.1.4.1.18070.2.2.1.7.1.6 |
condCodeTypeThis object value uniquely identifies the type of condition
or alarm that is raised.ro NotifCodeType .1.3.6.1.4.1.18070.2.2.1.7.1.7 |
actCondTableThis table lists all active conditions and alarms raised on
the system. SEQUENCE OF ActCondEntry .1.3.6.1.4.1.18070.2.2.1.7.2 |
actCondEntryContains identifying and descriptive attributes for a single
active condition or alarm raised on the network element. ActCondEntry .1.3.6.1.4.1.18070.2.2.1.7.2.1 |
actCondNotifIdxIdentifies the type of condition or alarm that is active by
pointing to the NOTIFICATION-TYPE object that corresponds to
the raising event of the condition or alarm. OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.7.2.1.1 |
actCondTableEntryIdxIdentifies the type of resource that is alarmed by pointing to
the corresponding table entry object. OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.7.2.1.2 |
actCondInstanceIdxIdentifies the specific instance of the idenitifed resource
type that is alarmed by providing instance data that applies
to an instance of the table entry object type identified by
actCondTableEntryIdx. The instance data portion of the OID is
mapped to an OCTET string. DisplayString .1.3.6.1.4.1.18070.2.2.1.7.2.1.3 |
actCondReportTypeIndicates if the table entry is a condition (non-alarmed) or
an alarm.ro CondReportType .1.3.6.1.4.1.18070.2.2.1.7.2.1.4 |
actCondDateAndTimeThe date and time that the condition or alarm reported in the
trap message was raised.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.7.2.1.5 |
actCondSeverityIndicates how severe the condition or alarm is.ro CondSeverity .1.3.6.1.4.1.18070.2.2.1.7.2.1.6 |
actCondServiceAffectingIndicates if the presence of this active condition or alarm
impacts the ability of the equipment to provide service as
expected.ro CondServiceAffecting .1.3.6.1.4.1.18070.2.2.1.7.2.1.7 |
actCondDescriptionA textual decription of the condition or alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.7.2.1.8 |
actCondObjectTypeIdentifies the type of managed object against which the
condition or alarm is raised.ro NotifObjectType .1.3.6.1.4.1.18070.2.2.1.7.2.1.9 |
actCondCodeTypeThis object value uniquely identifies the type of condition
or alarm that is raised.ro NotifCodeType .1.3.6.1.4.1.18070.2.2.1.7.2.1.10 |
actCondSummaryThis object summarizes the active alarm/condition status of
the network element. The value of the object returned
indicates the following status data:
- noActiveConditions: there are no active alarms or conditions
on the network element
- nonAlarmedConditionsActive: there is one or more active
conditions on the network element, but none are of alarmable
severity
- minorAlarmsActive: there is one or more active conditions
and/or alarms on the network element, and the highest severity
level alarm is minor
- majorAlarmsActive: there is one or more active conditions
and/or alarms on the network element, and the highest severity
level alarm is major
- criticalAlarmsActive: there is one or more active conditions
and/or alarms on the network element, and the highest severity
level alarm is criticalro Enumeration .1.3.6.1.4.1.18070.2.2.1.7.3 |
actAlarmTableThis table lists all active alarms raised on the system. SEQUENCE OF ActAlarmEntry .1.3.6.1.4.1.18070.2.2.1.7.4 |
actAlarmEntryContains identifying and descriptive attributes for a single
active alarm raised on the system. ActAlarmEntry .1.3.6.1.4.1.18070.2.2.1.7.4.1 |
actAlarmNotifIdxIdentifies the type of alarm that is active by pointing to the
NOTIFICATION-TYPE object that corresponds to the raising event
of the condition or alarm. OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.7.4.1.1 |
actAlarmTableEntryIdxIdentifies the type of resource that is alarmed by pointing to
the corresponding table entry object. OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.7.4.1.2 |
actAlarmInstanceIdxIdentifies the specific instance of the idenitifed resource
type that is alarmed by providing instance data that applies
to an instance of the table entry object type identified by
actAlarmTableEntryIdx. The instance data portion of the OID is
mapped to an OCTET string. DisplayString .1.3.6.1.4.1.18070.2.2.1.7.4.1.3 |
actAlarmReportTypeIndicates if the table entry is an alarm.ro CondReportType .1.3.6.1.4.1.18070.2.2.1.7.4.1.4 |
actAlarmDateAndTimeThe date and time that the alarm reported in the trap message
was raised.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.7.4.1.5 |
actAlarmSeverityIndicates how severe the alarm is.ro CondSeverity .1.3.6.1.4.1.18070.2.2.1.7.4.1.6 |
actAlarmServiceAffectingIndicates if the presence of this active alarm impacts the
ability of the equipment to provide service as expected.ro CondServiceAffecting .1.3.6.1.4.1.18070.2.2.1.7.4.1.7 |
actAlarmDescriptionA textual decription of the alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.7.4.1.8 |
actAlarmObjectTypeIdentifies the type of managed object against which the
alarm is raised.ro NotifObjectType .1.3.6.1.4.1.18070.2.2.1.7.4.1.9 |
actAlarmCodeTypeThis object value uniquely identifies the type of
alarm that is raised.ro NotifCodeType .1.3.6.1.4.1.18070.2.2.1.7.4.1.10 |
administration OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.8 |
tl1UserTableThis table contains one row for every provisioned user that
can operate the TL1 management interface on the NE. Each row
contains a list of attributes that pertain to a provisioned
TL1 user. SEQUENCE OF Tl1UserEntry .1.3.6.1.4.1.18070.2.2.1.8.1 |
tl1UserEntryThe conceptual row object of the TL1 user table. Tl1UserEntry .1.3.6.1.4.1.18070.2.2.1.8.1.1 |
tl1UserIdxThis is the unique user identifier, or UID, that is used for
TL1 access.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.8.1.1.1 |
tl1IpLockoutAddrThis is an IP address from which TL1 user login attempts have
been temporarily disabled due to an excessive number of failed
user login attempts.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.8.2 |
tl1LogTableThis table lists all the log entries generated by the TL1
interface on the BTI 7000 system. SEQUENCE OF Tl1LogEntry .1.3.6.1.4.1.18070.2.2.1.8.3 |
tl1LogEntryThe conceptual row object of the TL1 log table. Tl1LogEntry .1.3.6.1.4.1.18070.2.2.1.8.3.1 |
tl1LogIdxThe unique identifier for this log entry. It is the global Log
Id of the entry when viewed through the TL1 interface. Unsigned32 .1.3.6.1.4.1.18070.2.2.1.8.3.1.1 |
tl1LogSysNameThe name of the BTI 7000 system at the time that the log was
recorded.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.8.3.1.2 |
tl1LogTypeThe type of log entry.ro Enumeration .1.3.6.1.4.1.18070.2.2.1.8.3.1.3 |
tl1LogTypeSpecificLogNumThe type-specific number for this log.ro Unsigned32 .1.3.6.1.4.1.18070.2.2.1.8.3.1.4 |
tl1LogMsgCodeThe message code that was issued for this log entry. This
field is relevant to log entries for TL1 autonomous
notifications. For example, the message code may be 'REPT ALM
OC48'. A message code is reported for all log entries of type
alarm, event and dbChange. For logs of type security or
command, the message code is an empty string.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.8.3.1.5 |
tl1LogDateAndTimeThe timestamp of the log entry.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.8.3.1.6 |
tl1LogMessageThis is the main log entry contents. The log entry is enclosed
in double quotations.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.8.3.1.7 |
latestTl1LogNumIdentifies the value of the tl1LogIdx object for the most recently
added entry in the tl1LogTable.ro Unsigned32 .1.3.6.1.4.1.18070.2.2.1.8.4 |
snmpTrapRcvTableThis table contains one row for every configured SNMP
trap receiver. Each row contains a list of attributes
that pertain to a provisioned trap receiver. All access to
this table, whether for read, write, or create requests
are restricted to SNMP requests issued with a valid
community string configured with read-write access. SEQUENCE OF SnmpTrapRcvEntry .1.3.6.1.4.1.18070.2.2.1.8.5 |
snmpTrapRcvEntryThe conceptual row object of the SNMP trap receiver table. SnmpTrapRcvEntry .1.3.6.1.4.1.18070.2.2.1.8.5.1 |
snmpTrapRcvIdxThis string serves as a unique trap receiver Id and is
used to index the table.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.8.5.1.1 |
snmpTrapRcvIPAddrThe IP address of the trap receiver. The setting of this
object is mandatory when creating a new row.rw IpAddress .1.3.6.1.4.1.18070.2.2.1.8.5.1.2 |
snmpTrapRcvPortThe port on the specified IP address of the trap receiver.rw INTEGER .1.3.6.1.4.1.18070.2.2.1.8.5.1.3 |
snmpTrapRcvNotifTypeThe type of notification service to be provided to the
trap receiver. The notification type can be configured
as inform only if the message version specified for the
snmpTrapRcvVersion object is snmpv2c.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.8.5.1.4 |
snmpTrapRcvVersionThe type of notification service to be provided to the
trap receiver. The notification type can be configured
as inform only if the message version specified for the
snmpTrapRcvVersion object is snmpv2c. The setting of this
object is mandatory when creating a new row.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.8.5.1.5 |
snmpTrapRcvCommunityThe community string inserted into the trap messages
generated for this trap receiver. The setting of this
object is mandatory when creating a new row.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.8.5.1.6 |
snmpTrapRcvTTLThe time-to-live for the trap receiver. When the trap
receiver is created or this object is set, this object
specifies how long the trap receiver is to be configured.
When read, the value returned is the length of time
remaining before the trap receiver is automatically
deleted. The valid range for this object is 000-00 to
099-99. If this object is set to a value of 000-00,
the trap receiver will never auto-delete.rw HoursAndMinutes .1.3.6.1.4.1.18070.2.2.1.8.5.1.7 |
snmpTrapRcvRowStatusUsed to control the addition and deletion of entries
in the SNMP trap receiver table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.8.5.1.100 |
connections OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.9 |
xcvrXCTableThis table contains one row for every provisioned cross
connection between optical transceiver facilities on
wavelength translator, regenerator and manager circuit packs. SEQUENCE OF XcvrXCEntry .1.3.6.1.4.1.18070.2.2.1.9.1 |
xcvrXCEntryThe conceptual row object of the optical transceiver cross
connection table. XcvrXCEntry .1.3.6.1.4.1.18070.2.2.1.9.1.1 |
xcvrXCSrcTypeIdxThe specific type of wavelength conversion function of the
transceiver port that serves as the source port for the cross
connection. XcvrType .1.3.6.1.4.1.18070.2.2.1.9.1.1.1 |
xcvrXCSrcShelfIdxThe number of the shelf of the transceiver port that serves as
the source port for the cross connection. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.9.1.1.2 |
xcvrXCSrcSlotIdxThe number of the slot of the transceiver port that serves as
the source port for the cross connection. INTEGER .1.3.6.1.4.1.18070.2.2.1.9.1.1.3 |
xcvrXCSrcIdxThe number of the port of the transceiver port that serves as
the source port for the cross connection. INTEGER .1.3.6.1.4.1.18070.2.2.1.9.1.1.4 |
xcvrXCDestTypeIdxThe specific type of wavelength conversion function of the
transceiver port that serves as the destination port for the
cross connection. XcvrType .1.3.6.1.4.1.18070.2.2.1.9.1.1.5 |
xcvrXCDestShelfIdxThe number of the shelf of the transceiver port that serves as
the destination port for the cross connection. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.9.1.1.6 |
xcvrXCDestSlotIdxThe number of the slot of the transceiver port that serves as
the destination port for the cross connection. INTEGER .1.3.6.1.4.1.18070.2.2.1.9.1.1.7 |
xcvrXCDestIdxThe number of the port of the transceiver port that serves as
the destination port for the cross connection. INTEGER .1.3.6.1.4.1.18070.2.2.1.9.1.1.8 |
xcvrXCTypeThe type of cross connection between the identified source and
destination transceiver ports. This is a mandatory object when
a row of the transceiver cross connect table is created. Only
1-way and 2-way cross-connections are supported on optical
transceiver portsrw XCType .1.3.6.1.4.1.18070.2.2.1.9.1.1.9 |
xcvrXCRowStatusUsed to control the addition and deletion of entries in the
transceiver cross connection table, which in turn controls the
provisioning and de-provisioning of transceiver cross
connections.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.9.1.1.100 |
vcgXCTableThis table contains one row for every provisioned cross
connection between VCGs on Muxponder circuit packs. SEQUENCE OF VcgXCEntry .1.3.6.1.4.1.18070.2.2.1.9.2 |
vcgXCEntryThe conceptual row object of the VCG cross connection table. VcgXCEntry .1.3.6.1.4.1.18070.2.2.1.9.2.1 |
vcgXCSrcShelfIdxThe number of the shelf of the VCG entity that serves as the
source port for the cross connection. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.9.2.1.1 |
vcgXCSrcSlotIdxThe number of the slot of the VCG entity that serves as the
source port for the cross connection. INTEGER .1.3.6.1.4.1.18070.2.2.1.9.2.1.2 |
vcgXCSrcPortIdxThe number of the port of the VCG entity that serves as the
source port for the cross connection. INTEGER .1.3.6.1.4.1.18070.2.2.1.9.2.1.3 |
vcgXCSrcIdxThe number of the VCG within the identified port that serves
as the source port for the cross connection. INTEGER .1.3.6.1.4.1.18070.2.2.1.9.2.1.4 |
vcgXCDestShelfIdxThe number of the shelf of the VCG entity that serves as the
destination port for the cross connection. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.9.2.1.5 |
vcgXCDestSlotIdxThe number of the slot of the VCG entity that serves as the
destination port for the cross connection. INTEGER .1.3.6.1.4.1.18070.2.2.1.9.2.1.6 |
vcgXCDestPortIdxThe number of the port of the VCG entity that serves as the
destination port for the cross connection. INTEGER .1.3.6.1.4.1.18070.2.2.1.9.2.1.7 |
vcgXCDestIdxThe number of the VCG within the identified port that serves
as the destination port for the cross connection. INTEGER .1.3.6.1.4.1.18070.2.2.1.9.2.1.8 |
vcgXCTypeThe type of cross connection between the identified source and
destination VCG entities. This is a mandatory object when a
row of the VCG cross connect table is created. Only 2-way and
2-way protected cross-connections are supported between VCGs.rw XCType .1.3.6.1.4.1.18070.2.2.1.9.2.1.9 |
vcgXCProtShelfNumThe number of the shelf of the VCG entity that serves as the
protection port for the cross connection.rw INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.9.2.1.10 |
vcgXCProtSlotNumThe number of the slot of the VCG entity that serves as the
protection port for the cross connection.rw INTEGER .1.3.6.1.4.1.18070.2.2.1.9.2.1.11 |
vcgXCProtPortNumThe number of the port of the VCG entity that serves as the
protection port for the cross connection.rw INTEGER .1.3.6.1.4.1.18070.2.2.1.9.2.1.12 |
vcgXCProtNumThe number of the VCG within the identified port that serves
as the protection port for the cross connection.rw INTEGER .1.3.6.1.4.1.18070.2.2.1.9.2.1.13 |
vcgXCRowStatusUsed to control the addition and deletion of entries in the
VCG cross connection table, which in turn controls the
provisioning and de-provisioning of VCG cross connections.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.9.2.1.100 |
stsnXCTableThis table contains one row for every provisioned cross
connection between SONET STS-N facilities on Muxponder circuit
packs. SEQUENCE OF StsnXCEntry .1.3.6.1.4.1.18070.2.2.1.9.3 |
stsnXCEntryThe conceptual row object of the STS-N cross connection
table. StsnXCEntry .1.3.6.1.4.1.18070.2.2.1.9.3.1 |
stsnXCStsnTypeIdxThe specific STS-N rate of the cross-connection. StsnType .1.3.6.1.4.1.18070.2.2.1.9.3.1.1 |
stsnXCSrcShelfIdxThe number of the shelf of the STS-N facility that serves as
the source end-point for the cross connection. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.9.3.1.2 |
stsnXCSrcSlotIdxThe number of the slot of the STS-N facility that serves as
the source end-point for the cross connection. INTEGER (1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.9.3.1.3 |
stsnXCSrcPortIdxThe number of the port of the STS-N facility that serves as
the source end-point for the cross connection. INTEGER .1.3.6.1.4.1.18070.2.2.1.9.3.1.4 |
stsnXCSrcIdxThe number of the STS-N within the identified port that serves
as the source end-point for the cross connection. INTEGER .1.3.6.1.4.1.18070.2.2.1.9.3.1.5 |
stsnXCDestShelfIdxThe number of the shelf of the STS-N facility that serves as
the destination end-point for the cross connection. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.9.3.1.6 |
stsnXCDestSlotIdxThe number of the slot of the STS-N entity that serves as the
destination end-point for the cross connection. INTEGER (1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.9.3.1.7 |
stsnXCDestPortIdxThe number of the port of the STS-N entity that serves as the
destination end-point for the cross connection. INTEGER .1.3.6.1.4.1.18070.2.2.1.9.3.1.8 |
stsnXCDestIdxThe number of the STS-N within the identified port that serves
as the destination end-point for the cross connection. INTEGER .1.3.6.1.4.1.18070.2.2.1.9.3.1.9 |
stsnXCTypeThe type of cross connection between the identified source and
destination STS-N facilities. This is a mandatory object when
a row of the STS-N cross connect table is created. Only 2-way
cross-connections are supported between STS-Ns.rw XCType .1.3.6.1.4.1.18070.2.2.1.9.3.1.10 |
stsnXCProtTypeNumThe rate of the STS-N facility that serves as the protection
end-point for the cross connection.rw StsnType .1.3.6.1.4.1.18070.2.2.1.9.3.1.11 |
stsnXCProtShelfNumThe number of the shelf of the STS-N entity that serves as the
protection end-point for the cross connection.rw INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.9.3.1.12 |
stsnXCProtSlotNumThe number of the slot of the STS-N entity that serves as the
protection end-point for the cross connection.rw INTEGER (1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.9.3.1.13 |
stsnXCProtPortNumThe number of the port of the STS-N entity that serves as the
protection end-point for the cross connection.rw INTEGER .1.3.6.1.4.1.18070.2.2.1.9.3.1.14 |
stsnXCProtNumThe number of the STS-N within the identified port that serves
as the protection end-point for the cross connection.rw INTEGER .1.3.6.1.4.1.18070.2.2.1.9.3.1.15 |
stsnXCRowStatusUsed to control the addition and deletion of entries in the
STS-N cross connection table, which in turn controls the
provisioning and de-provisioning of STS-N cross connections.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.9.3.1.100 |
vcnXCTableThis table contains one row for every provisioned cross
connection between SDH VC-N facilities on Muxponder circuit
packs. SEQUENCE OF VcnXCEntry .1.3.6.1.4.1.18070.2.2.1.9.4 |
vcnXCEntryThe conceptual row object of the VC-N cross connection table. VcnXCEntry .1.3.6.1.4.1.18070.2.2.1.9.4.1 |
vcnXCVcnTypeIdxThe specific rate of the VC-N cross-connection. VcnType .1.3.6.1.4.1.18070.2.2.1.9.4.1.1 |
vcnXCSrcShelfIdxThe number of the shelf of the VC-N facility that serves as
the source end-point for the cross connection. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.9.4.1.2 |
vcnXCSrcSlotIdxThe number of the slot of the VC-N facility that serves as the
source end-point for the cross connection. INTEGER (1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.9.4.1.3 |
vcnXCSrcPortIdxThe number of the port of the VC-N facility that serves as the
source end-point for the cross connection. INTEGER .1.3.6.1.4.1.18070.2.2.1.9.4.1.4 |
vcnXCSrcIdxThe number of the VC-N within the identified port that serves
as the source end-point for the cross connection. INTEGER .1.3.6.1.4.1.18070.2.2.1.9.4.1.5 |
vcnXCDestShelfIdxThe number of the shelf of the VC-N facility that serves as
the destination end-point for the cross connection. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.9.4.1.6 |
vcnXCDestSlotIdxThe number of the slot of the VC-N entity that serves as the
destination end-point for the cross connection. INTEGER (1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.9.4.1.7 |
vcnXCDestPortIdxThe number of the port of the VC-N entity that serves as the
destination end-point for the cross connection. INTEGER .1.3.6.1.4.1.18070.2.2.1.9.4.1.8 |
vcnXCDestIdxThe number of the VC-N within the identified port that serves
as the destination end-point for the cross connection. INTEGER .1.3.6.1.4.1.18070.2.2.1.9.4.1.9 |
vcnXCTypeThe type of cross connection between the identified source and
destination VC-N facilities. This is a mandatory object when a
row of the VC-N cross connect table is created. Only 2-way
cross-connections are supported between VC-Ns.rw XCType .1.3.6.1.4.1.18070.2.2.1.9.4.1.10 |
vcnXCProtTypeNumThe rate of the VC-N facility that serves as the protection
end-point for the cross connection.rw VcnType .1.3.6.1.4.1.18070.2.2.1.9.4.1.11 |
vcnXCProtShelfNumThe number of the shelf of the VC-N entity that serves as the
protection end-point for the cross connection.rw INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.9.4.1.12 |
vcnXCProtSlotNumThe number of the slot of the VC-N entity that serves as the
protection end-point for the cross connection.rw INTEGER (1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.9.4.1.13 |
vcnXCProtPortNumThe number of the port of the VC-N entity that serves as the
protection end-point for the cross connection.rw INTEGER .1.3.6.1.4.1.18070.2.2.1.9.4.1.14 |
vcnXCProtNumThe number of the VC-N within the identified port that serves
as the protection end-point for the cross connection.rw INTEGER .1.3.6.1.4.1.18070.2.2.1.9.4.1.15 |
vcnXCRowStatusUsed to control the addition and deletion of entries in the
VC-N cross connection table, which in turn controls the
provisioning and de-provisioning of VC-N cross connections.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.9.4.1.100 |
odunXCTableThis table contains one row for every provisioned cross
connection between OTN ODU-N facilities on Muxponder circuit
packs. SEQUENCE OF OdunXCEntry .1.3.6.1.4.1.18070.2.2.1.9.5 |
odunXCEntryThe conceptual row object of the ODU-N cross connection
table. OdunXCEntry .1.3.6.1.4.1.18070.2.2.1.9.5.1 |
odunXCOdunTypeIdxThe specific rate of the ODU-N cross-connection. OdunType .1.3.6.1.4.1.18070.2.2.1.9.5.1.1 |
odunXCSrcShelfIdxThe number of the shelf of the ODU-N facility that serves as
the source end-point for the cross connection. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.9.5.1.2 |
odunXCSrcSlotIdxThe number of the slot of the ODU-N facility that serves as
the source end-point for the cross connection. INTEGER (1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.9.5.1.3 |
odunXCSrcPortIdxThe number of the port of the ODU-N facility that serves as
the source end-point for the cross connection. INTEGER .1.3.6.1.4.1.18070.2.2.1.9.5.1.4 |
odunXCSrcIdxThe number of the ODU-N within the identified port that serves
as the source end-point for the cross connection. INTEGER .1.3.6.1.4.1.18070.2.2.1.9.5.1.5 |
odunXCDestShelfIdxThe number of the shelf of the ODU-N facility that serves as
the destination end-point for the cross connection. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.9.5.1.6 |
odunXCDestSlotIdxThe number of the slot of the ODU-N entity that serves as the
destination end-point for the cross connection. INTEGER (1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.9.5.1.7 |
odunXCDestPortIdxThe number of the port of the ODU-N entity that serves as the
destination end-point for the cross connection. INTEGER .1.3.6.1.4.1.18070.2.2.1.9.5.1.8 |
odunXCDestIdxThe number of the ODU-N within the identified port that serves
as the destination end-point for the cross connection. INTEGER .1.3.6.1.4.1.18070.2.2.1.9.5.1.9 |
odunXCTypeThe type of cross connection between the identified source and
destination ODU-N facilities. This is a mandatory object when
a row of the ODU-N cross connect table is created. Only 2-way
cross-connections are supported between ODU-Ns.rw XCType .1.3.6.1.4.1.18070.2.2.1.9.5.1.10 |
odunXCProtTypeNumThe rate of the ODU-N facility that serves as the protection
end-point for the cross connection.rw OdunType .1.3.6.1.4.1.18070.2.2.1.9.5.1.11 |
odunXCProtShelfNumThe number of the shelf of the ODU-N entity that serves as the
protection end-point for the cross connection.rw INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.9.5.1.12 |
odunXCProtSlotNumThe number of the slot of the ODU-N entity that serves as the
protection end-point for the cross connection.rw INTEGER (1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.9.5.1.13 |
odunXCProtPortNumThe number of the port of the ODU-N entity that serves as the
protection end-point for the cross connection.rw INTEGER .1.3.6.1.4.1.18070.2.2.1.9.5.1.14 |
odunXCProtNumThe number of the ODU-N within the identified port that serves
as the protection end-point for the cross connection.rw INTEGER .1.3.6.1.4.1.18070.2.2.1.9.5.1.15 |
odunXCRowStatusUsed to control the addition and deletion of entries in the
ODU-N cross connection table, which in turn controls the
provisioning and de-provisioning of ODU-N cross connections.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.9.5.1.100 |
protection OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.10 |
xcvrProtGrpTableThis table contains one row for every provisioned protection
group pairing between optical transceiver facilities on the
wavelength translator, regenerator and manager cards. SEQUENCE OF XcvrProtGrpEntry .1.3.6.1.4.1.18070.2.2.1.10.1 |
xcvrProtGrpEntryThe conceptual row object of the optical transceiver
protection group table. XcvrProtGrpEntry .1.3.6.1.4.1.18070.2.2.1.10.1.1 |
xcvrProtGrpWorkTypeIdxThe specific type of wavelength conversion function of the
transceiver port that serves as the working port for the
protection group. XcvrType .1.3.6.1.4.1.18070.2.2.1.10.1.1.1 |
xcvrProtGrpWorkShelfIdxThe number of the shelf of the transceiver port that serves as
the working port for the protection group. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.10.1.1.2 |
xcvrProtGrpWorkSlotIdxThe number of the slot of the transceiver port that serves as
the working port for the protection group. INTEGER .1.3.6.1.4.1.18070.2.2.1.10.1.1.3 |
xcvrProtGrpWorkIdxThe number of the port of the transceiver port that serves as
the working port for the protection group. INTEGER .1.3.6.1.4.1.18070.2.2.1.10.1.1.4 |
xcvrProtGrpProtTypeIdxThe specific type of wavelength conversion function of the
transceiver port that serves as the protection port for the
protection group. XcvrType .1.3.6.1.4.1.18070.2.2.1.10.1.1.5 |
xcvrProtGrpProtShelfIdxThe number of the shelf of the transceiver port that serves as
the protection port for the protection group. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.10.1.1.6 |
xcvrProtGrpProtSlotIdxThe number of the slot of the transceiver port that serves as
the protection port for the protection group. INTEGER .1.3.6.1.4.1.18070.2.2.1.10.1.1.7 |
xcvrProtGrpProtIdxThe number of the port of the transceiver port that serves as
the protection port for the protection group. INTEGER .1.3.6.1.4.1.18070.2.2.1.10.1.1.8 |
xcvrProtGrpIdTextual data recorded by the user to describe the provisioned
transceiver protection group in a manner useful to the user.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.10.1.1.9 |
xcvrProtGrpRowStatusUsed to control the addition and deletion of entries in the
transceiver protection group table, which in turn controls
provisioning and deprovisioning of optical transceiver
protection groups.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.10.1.1.100 |
ocnProtGrpTableThis table contains one row for every provisioned protection
group pairing between SONET OC-N facilities on Muxponder
circuit packs. SEQUENCE OF OcnProtGrpEntry .1.3.6.1.4.1.18070.2.2.1.10.2 |
ocnProtGrpEntryThe conceptual row object of the OC-N facility protection
group table. OcnProtGrpEntry .1.3.6.1.4.1.18070.2.2.1.10.2.1 |
ocnProtGrpWorkTypeIdxThe specific rate of the OC-N facility that serves as the
working facility for the protection group. Currently, only
OCN-N facilities that are OTU-N mapped are supported for protection
grouping. OcnType .1.3.6.1.4.1.18070.2.2.1.10.2.1.1 |
ocnProtGrpWorkShelfIdxThe number of the shelf of the OC-N facility that serves as
the working facility for the protection group. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.10.2.1.2 |
ocnProtGrpWorkSlotIdxThe number of the slot of the OC-N facility that serves as
the working facility for the protection group. INTEGER (1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.10.2.1.3 |
ocnProtGrpWorkPortIdxThe number of the port of the OC-N facility that serves as
the working facility for the protection group. INTEGER .1.3.6.1.4.1.18070.2.2.1.10.2.1.4 |
ocnProtGrpProtTypeIdxThe specific rate of the OC-N facility that serves as the
protection facility for the protection group. Currently, only
OC-N facilities that are OTU-N mapped are supported for protection
grouping. OcnType .1.3.6.1.4.1.18070.2.2.1.10.2.1.5 |
ocnProtGrpProtShelfIdxThe number of the shelf of the OC-N facility that serves as
the protection facility for the protection group. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.10.2.1.6 |
ocnProtGrpProtSlotIdxThe number of the slot of the OC-N facility that serves as
the protection facility for the protection group. INTEGER (1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.10.2.1.7 |
ocnProtGrpProtPortIdxThe number of the port of the OC-N facility that serves as
the protection facility for the protection group. INTEGER .1.3.6.1.4.1.18070.2.2.1.10.2.1.8 |
ocnProtGrpIdTextual data recorded by the user to describe the provisioned
OC-N protection group in a manner useful to the user.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.10.2.1.9 |
ocnProtGrpRowStatusUsed to control the addition and deletion of entries in the
OC-N protection group table, which in turn controls
provisioning and deprovisioning of OC-N facility
protection groups.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.10.2.1.100 |
stmnProtGrpTableThis table contains one row for every provisioned protection
group pairing between SDH STM-N facilities on Muxponder
circuit packs. SEQUENCE OF StmnProtGrpEntry .1.3.6.1.4.1.18070.2.2.1.10.3 |
stmnProtGrpEntryThe conceptual row object of the STM-N facility protection
group table. StmnProtGrpEntry .1.3.6.1.4.1.18070.2.2.1.10.3.1 |
stmnProtGrpWorkTypeIdxThe specific rate of the STM-N facility that serves as the
working facility for the protection group. Currently, only
STM-N facilities that are OTU-N mapped are supported for protection
grouping. StmnType .1.3.6.1.4.1.18070.2.2.1.10.3.1.1 |
stmnProtGrpWorkShelfIdxThe number of the shelf of the STM-N facility that serves as
the working facility for the protection group. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.10.3.1.2 |
stmnProtGrpWorkSlotIdxThe number of the slot of the STM-N facility that serves as
the working facility for the protection group. INTEGER (1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.10.3.1.3 |
stmnProtGrpWorkPortIdxThe number of the port of the STM-N facility that serves as
the working facility for the protection group. INTEGER .1.3.6.1.4.1.18070.2.2.1.10.3.1.4 |
stmnProtGrpProtTypeIdxThe specific rate of the STM-N facility that serves as the
protection facility for the protection group. Currently, only
STM-N facilities that are OTU-N mapped are supported for protection
grouping. StmnType .1.3.6.1.4.1.18070.2.2.1.10.3.1.5 |
stmnProtGrpProtShelfIdxThe number of the shelf of the STM-N facility that serves as
the protection facility for the protection group. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.10.3.1.6 |
stmnProtGrpProtSlotIdxThe number of the slot of the STM-N facility that serves as
the protection facility for the protection group. INTEGER (1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.10.3.1.7 |
stmnProtGrpProtPortIdxThe number of the port of the STM-N facility that serves as
the protection facility for the protection group. INTEGER .1.3.6.1.4.1.18070.2.2.1.10.3.1.8 |
stmnProtGrpIdTextual data recorded by the user to describe the provisioned
STM-N protection group in a manner useful to the user.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.10.3.1.9 |
stmnProtGrpRowStatusUsed to control the addition and deletion of entries in the
STM-N protection group table, which in turn controls
provisioning and deprovisioning of STM-N facility
protection groups.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.10.3.1.100 |
operations OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.11 |
neOperations OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.11.1 |
dbBackupAndRestore OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.11.1.1 |
dbBackupAndRestoreCmdThis object is used to activate the steps of a database backup
or database restore operation. The description of the
DbBackupAndRestoreCmd textual convention explains the usage of
this object to perform these operations.rw DbBackupAndRestoreCmd .1.3.6.1.4.1.18070.2.2.1.11.1.1.1 |
dbBackupAndRestoreTypeThis object is used to indicate whether a local database, or a
remote database is involved in the backup or restore operation
that is being activated with the dbBackupAndRestoreCmd object,
as explained in the DbBackupAndRestoreType textual
convention.rw DbBackupAndRestoreType .1.3.6.1.4.1.18070.2.2.1.11.1.1.2 |
dbBackupAndRestoreAddressThe IP address of an ftp server which the NE database is
backed up to, or restored from. This object is used when the
dbBackupAndRestoreType is set to remote.rw IpAddress .1.3.6.1.4.1.18070.2.2.1.11.1.1.3 |
dbBackupAndRestorePathThe directory path on the ftp server where where the NE
database backup is to be saved to, or restored from. This
object is used when the dbBackupAndRestoreType is set to
remote.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.11.1.1.4 |
dbBackupAndRestoreFtpUserThe user identifier to be used on the ftp server where the NE
database backup is to be saved to, or restored from. This
object is used when the dbBackupAndRestoreType is set to
remote.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.11.1.1.5 |
dbBackupAndRestoreFtpPswdThe password to be used on the ftp server where the NE
database backup is to be saved to, or restored from. This
object is used when the dbBackupAndRestoreType is set to
remote.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.11.1.1.6 |
dbBackupAndRestoreCheckAlmThis object is used to indicate whether or not the system is
to be checked for active alarms before proceding with a backup
or restore operation. If set to yes, the requested action will
not be performed if alarms are active on the system. If not
specified in the same set request as the dbBackupAndRestoreCmd
object, the value is defaulted to yes.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.11.1.1.7 |
dbBackupAndRestoreCheckSysNameThis object is used to indicate whether or not the system name
of the NE targeted for a database restore operation against
the system name embedded in the database backup file to be
restored. If set to yes, the requested action will not be
performed if system names do not match. If not specified in
the same set request as the dbBackupAndRestoreCmd object, the
value is defaulted to yes.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.11.1.1.8 |
dbBackupAndRestoreInvokeFilenameThe name of the database backup file that is to be used in a
database restore operation. This object is set along with the
dbBackupAndRestoreCmd object when it is set to invokeRestore,
as a confirmation that the database that is to be restored is
the correct database. In order for the invokeRestore command
to proceed, the value set for this object must match the value
of the dbBackupAndRestoreFilename object.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.11.1.1.9 |
dbBackupAndRestoreFilenameThe name of the database backup file that is present and ready
to be restored. The value of this field is valid after the
completion of the loadRestore command.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.11.1.1.10 |
dbBackupAndRestoreResultIndicates if the identified stage of the database backup and
restore process has resulted in success or failure.ro Enumeration .1.3.6.1.4.1.18070.2.2.1.11.1.1.11 |
swUpgrade OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.11.1.2 |
swUpgradeCmdThis object is used to activate the steps of a software
upgrade procedure on the system. The description of the
SwUpgradeCmd textual convention explains the usage of this
object to perform these operations.rw SwUpgradeCmd .1.3.6.1.4.1.18070.2.2.1.11.1.2.1 |
swUpgradeAddressThe IP address of an ftp or sftp server from which the software
load files for the upgrade are to be downloaded.rw IpAddress .1.3.6.1.4.1.18070.2.2.1.11.1.2.2 |
swUpgradePathThe directory path on the upgrade load files ftp or sftp server
where the software load files are found.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.11.1.2.3 |
swUpgradeFtpUserThe user identifier to be used on the ftp or sftp server from
which the upgrade load is downloaded.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.11.1.2.4 |
swUpgradeFtpPswdThe password to be used on the ftp or sftp server from which
the upgrade load is downloaded.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.11.1.2.5 |
swUpgradeInvokeRelNumThe release number of the software upgrade load that is
targeted in a software upgrade invoke operation. This object
must be set along with the swUpgradeCmd object when it is set
to invokeUpgrade or invokeScpUpgrade, as a confirmation that
the software load to be used in the upgrade is the correct
load.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.11.1.2.6 |
swUpgradeCheckAlmThis object is used to indicate whether or not the system is
to be checked for active alarms before proceding with a
software upgrade operation. If set to yes, the requested
action will not be performed if alarms are active on the
system. If not specified in the same set request as the
swUpgradeCmd object, the value is defaulted to yes.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.11.1.2.7 |
swUpgradeActiveRelNumThe release number of the software load that is installed on
the system and is currently active.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.11.1.2.8 |
swUpgradeInactiveRelNumThe release number of the software load that is installed on
the system and is currently inactive.ro DisplayString .1.3.6.1.4.1.18070.2.2.1.11.1.2.9 |
swUpgradeFileTransferTypeThis object is used to define the file transfer protocol used
to retreive the load from a remote server. The default value is
ftprw SwUpgradeFileTransferType .1.3.6.1.4.1.18070.2.2.1.11.1.2.10 |
shelfInvOperations OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.11.2 |
slotInvOperations OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.11.3 |
shelfOperations OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.11.4 |
cpOperations OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.11.5 |
cpRestartOpTableThis table contains one row for every provisioned restartable
circuit pack on the NE to facilitate the performing of circuit
pack restarts. SEQUENCE OF CpRestartOpEntry .1.3.6.1.4.1.18070.2.2.1.11.5.1 |
cpRestartOpEntryThe conceptual row object of the circuit pack restart
operation table. CpRestartOpEntry .1.3.6.1.4.1.18070.2.2.1.11.5.1.1 |
cpRestartOpTypeIdxThe specific type of circuit pack targeted for the restart
operation. CpType .1.3.6.1.4.1.18070.2.2.1.11.5.1.1.1 |
cpRestartOpShelfIdxThe number of the shelf on which the circuit pack targeted for
the restart operation is provisioned. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.11.5.1.1.2 |
cpRestartOpSlotIdxThe number of the slot in which the circuit pack targeted for
the restart operation is provisioned. For ESI type circuit
packs, the slot will be 0. For CCM type circuit packs, the slot
can only be 1 or 2. INTEGER .1.3.6.1.4.1.18070.2.2.1.11.5.1.1.3 |
cpRestartOpCmdUsed to perform a circuit pack restart operation as follows.
- warmRestart causes a restart of the main processor only;
traffic is not affected
- coldRestart causes a full circuit pack restart, including
data path
- powerOn causes a circuit pack that has been powered down
due to a high temperature or voltage event to power on.
When this object is read, the value noOp is returned.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.11.5.1.1.4 |
oaOperations OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.11.6 |
oaOOBRSDOpTableThis table contains one row for every provisioned optical
amplifier on the NE that supports the Override Optical Back
Reflection Shutdown operation. SEQUENCE OF OaOOBRSDOpEntry .1.3.6.1.4.1.18070.2.2.1.11.6.1 |
oaOOBRSDOpEntryThe conceptual row object of the optical amplifier override
optical back reflection shutdown operation table. OaOOBRSDOpEntry .1.3.6.1.4.1.18070.2.2.1.11.6.1.1 |
oaOOBRSDOpTypeIdxThe specific type of optical amplifier. OaType .1.3.6.1.4.1.18070.2.2.1.11.6.1.1.1 |
oaOOBRSDOpShelfIdxThe number of the shelf on which the optical amplifier
targeted for the operation is provisioned. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.11.6.1.1.2 |
oaOOBRSDOpSlotIdxThe number of the slot within which the optical amplifier
facility targeted for the operation is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.11.6.1.1.3 |
oaOOBRSDOpIdxThe number of the port on the circuit pack on which the
optical amplifier facility has been provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.11.6.1.1.4 |
oaOOBRSDOpCmdUsed to perform a Override Optical Back Reflection Shutdown
operation when this object is set to overrideOBRSD. When read,
this object returns noOp.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.11.6.1.1.5 |
oaOOBRSDOpTimerUsed to specify the time duration of an override back
reflection shutdown operation. It is only valid to set the
value of this object in the same set request as for the
oaOOBRSDOpCmd object. Despite the indicated value range, the
actual supported range is 20 to 600. The value 0 is returned
when this object is read, even if an overrideOBRSD operation
is in progress.rw INTEGER .1.3.6.1.4.1.18070.2.2.1.11.6.1.1.6 |
dataCommsOperations OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.11.7 |
dataCommsPingTableThis table contains one row for every provisioned circuit pack
on the NE from which an IP ping request can be sent. This
includes all SCP and OSC type packs. SEQUENCE OF DataCommsPingEntry .1.3.6.1.4.1.18070.2.2.1.11.7.1 |
dataCommsPingEntryThe conceptual row object of the data comms ping table. DataCommsPingEntry .1.3.6.1.4.1.18070.2.2.1.11.7.1.1 |
dataCommsPingCpTypeIdxThis object is used to indicate the type of circuit pack from
which the ping operation is to be conducted using the
dataCommsPingCmd object. CpType .1.3.6.1.4.1.18070.2.2.1.11.7.1.1.1 |
dataCommsPingShelfIdxThis object is used to indicate the shelf number containing
the circuit pack from which the ping operation is to be
conducted using the dataCommsPingCmd object. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.11.7.1.1.2 |
dataCommsPingSlotIdxThis object is used to indicate the slot number containing the
circuit pack from which the ping operation is to be conducted
using the dataCommsPingCmd object. INTEGER .1.3.6.1.4.1.18070.2.2.1.11.7.1.1.3 |
dataCommsPingCmdThis object is used to trigger a ping operation from an OSC or
SCP circuit pack. The description of DataCommsPingCmd textual
convention explains the usage of this object to perform the
ping operation.rw DataCommsPingCmd .1.3.6.1.4.1.18070.2.2.1.11.7.1.1.4 |
dataCommsPingAddressThis object is used to indicate the IP Address which is the
target of the ping operation to be conducted using the
dataCommsPingCmd object.rw IpAddress .1.3.6.1.4.1.18070.2.2.1.11.7.1.1.5 |
dataCommsPingNumAttemptsThis object is used to indicate how many ping attempts are to
be made in the ping operation to be conducted using the
dataCommsPingCmd object. The default is 3.rw INTEGER ( 1..3 ) .1.3.6.1.4.1.18070.2.2.1.11.7.1.1.6 |
dataCommsPingNumSuccessesThis object is used to indicate how many ping trials attempted
in the ping operation resulted in a successful ping
completion.ro INTEGER ( 0..3 ) .1.3.6.1.4.1.18070.2.2.1.11.7.1.1.7 |
pluggableInvOperations OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.11.8 |
pluggableInvRestartOpTableThis table contains one row for every provisioned restartable
pluggable on a circuit pack. SEQUENCE OF PluggableInvRestartOpEntry .1.3.6.1.4.1.18070.2.2.1.11.8.1 |
pluggableInvRestartOpEntryThe conceptual row object of the pluggable restart
operation table. PluggableInvRestartOpEntry .1.3.6.1.4.1.18070.2.2.1.11.8.1.1 |
pluggableInvRestartOpTypeIdxThe type of small form-factor pluggable inventory item targeted for the restart
operation. Enumeration .1.3.6.1.4.1.18070.2.2.1.11.8.1.1.1 |
pluggableInvRestartOpShelfIdxThe number of the shelf on which the pluggable inventory item
resides targeted for the restart operation is provisioned. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.11.8.1.1.2 |
pluggableInvRestartOpSlotIdxThe number of the slot that contains the pluggable inventory
item targeted for the restart operation is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.11.8.1.1.3 |
pluggableInvRestartOpPortIdxThe number of the port on the circuit pack that contains the
pluggable inventory item. INTEGER .1.3.6.1.4.1.18070.2.2.1.11.8.1.1.4 |
pluggableInvRestartOpCmdUsed to perform a restart operation as follows.
- coldRestart causes a pluggable restart
When this object is read, the value noOp is returned.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.11.8.1.1.5 |
xcvrOperations OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.11.9 |
xcvrLpbkOpTableThis table contains one row for every provisioned optical
transceiver on the NE to facilitate the performing of
transceiver loopback operations. SEQUENCE OF XcvrLpbkOpEntry .1.3.6.1.4.1.18070.2.2.1.11.9.1 |
xcvrLpbkOpEntryThe conceptual row object of the optical transceiver loopback
operation table. XcvrLpbkOpEntry .1.3.6.1.4.1.18070.2.2.1.11.9.1.1 |
xcvrLpbkOpTypeIdxThe specific type of wavelength conversion function of the
circuit pack of the transceiver port targeted for the loopback
operation. XcvrType .1.3.6.1.4.1.18070.2.2.1.11.9.1.1.1 |
xcvrLpbkOpShelfIdxThe number of the shelf of the transceiver targeted for the
loopback operation. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.11.9.1.1.2 |
xcvrLpbkOpSlotIdxThe number of the slot in which the transceiver targeted for
the loopback operation is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.11.9.1.1.3 |
xcvrLpbkOpIdxThe number of the port on the circuit pack on which the
optical transceiver facility has been provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.11.9.1.1.4 |
xcvrLpbkOpCmdUsed to perform a loopback operation on a transceiver facility
as follows:
- oprLpbk: operates a loopback on the transceiver
- rlsLpbk: causes a previously invoked loopback to be released
- oprTermLpbk: operates a terminal loopback for the transceiver
When read, this object returns noOp.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.11.9.1.1.5 |
xcvrProtSwOpTableThis table contains one row for every provisioned optical
transceiver on the NE configured to be part of a protection
group pair to facilitate the performing of transceiver
protection switching operations. SEQUENCE OF XcvrProtSwOpEntry .1.3.6.1.4.1.18070.2.2.1.11.9.2 |
xcvrProtSwOpEntryThe conceptual row object of the optical transceiver
protection switching operation table. XcvrProtSwOpEntry .1.3.6.1.4.1.18070.2.2.1.11.9.2.1 |
xcvrProtSwOpTypeIdxThe specific type of wavelength conversion function of the
circuit pack of the transceiver port targeted for the
protection switching operation. XcvrType .1.3.6.1.4.1.18070.2.2.1.11.9.2.1.1 |
xcvrProtSwOpShelfIdxThe number of the shelf of the transceiver targeted for the
protection switching operation. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.11.9.2.1.2 |
xcvrProtSwOpSlotIdxThe number of the slot within which the transceiver targeted
for the protection switching operation is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.11.9.2.1.3 |
xcvrProtSwOpIdxThe number of the port on the circuit pack on which the
optical transceiver facility has been provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.11.9.2.1.4 |
xcvrProtSwOpCmdUsed to perform a protection switch on a transceiver facility
which is configured to be a part of a protection group, as
described in the ProtSwOpCmd textual convention.rw ProtSwOpCmd .1.3.6.1.4.1.18070.2.2.1.11.9.2.1.5 |
adminOperations OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.11.10 |
amdOperations OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.11.11 |
ocnOperations OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.11.12 |
ocnLpbkOpTableThis table contains one row for every provisioned OC-N
facility on the NE to facilitate the performing loopback
operations. SEQUENCE OF OcnLpbkOpEntry .1.3.6.1.4.1.18070.2.2.1.11.12.1 |
ocnLpbkOpEntryThe conceptual row object of the OC-N loopback operation
table. OcnLpbkOpEntry .1.3.6.1.4.1.18070.2.2.1.11.12.1.1 |
ocnLpbkOpTypeIdxThe specific type of OC-N signal which is targeted for the
loopback operation. OcnType .1.3.6.1.4.1.18070.2.2.1.11.12.1.1.1 |
ocnLpbkOpShelfIdxThe number of the shelf of the OC-N facility targeted for the
loopback operation. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.11.12.1.1.2 |
ocnLpbkOpSlotIdxThe number of the slot in which the OC-N facility targeted for
the loopback operation is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.11.12.1.1.3 |
ocnLpbkOpPortIdxThe number of the port on the circuit pack on which the OC-N
facility targeted for the loopback operation is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.11.12.1.1.4 |
ocnLpbkOpCmdUsed to perform a loopback operation on a OC-N facility as
follows:
- oprFacilityLpbk: operates an OC-N facility loopback
- oprTerminalLpbk: operates an OC-N terminal loopback
- rlsLpbk: releases a previously invoked loopback
Note that the terminal loopback can only be operated on a
client OC-N facility. When read, this object returns noOp.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.11.12.1.1.5 |
ocnProtSwOpTableThis table contains one row for every provisioned SONET OC-N
facility on the NE configured to be part of a protection group
pair to facilitate the performing of OC-N line protection
switching operations. SEQUENCE OF OcnProtSwOpEntry .1.3.6.1.4.1.18070.2.2.1.11.12.2 |
ocnProtSwOpEntryThe conceptual row object of the SONET OC-N facility
protection switching operation table. OcnProtSwOpEntry .1.3.6.1.4.1.18070.2.2.1.11.12.2.1 |
ocnProtSwOpTypeIdxThe specific rate of OC-N facility targeted for the
protection switching operation. OcnType .1.3.6.1.4.1.18070.2.2.1.11.12.2.1.1 |
ocnProtSwOpShelfIdxThe number of the shelf of the OC-N facility targeted for
the protection switching operation. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.11.12.2.1.2 |
ocnProtSwOpSlotIdxThe number of the slot within which the OC-N facility
targeted for the protection switching operation is
provisioned. INTEGER (1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.11.12.2.1.3 |
ocnProtSwOpIdxThe number of the port on the circuit pack on which the OC-N
facility has been provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.11.12.2.1.4 |
ocnProtSwOpCmdUsed to perform a protection switch on a OC-N facility which
is configured to be a part of a protection group, as described
in the ProtSwOpCmd textual convention.rw ProtSwOpCmd .1.3.6.1.4.1.18070.2.2.1.11.12.2.1.5 |
stsnOperations OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.11.13 |
stsnProtSwOpTableThis table contains one row for every created SONET STS-N
facility on the system which is part of a protection group
pairing to facilitate the performing of STS-N protection
switching operations. SEQUENCE OF StsnProtSwOpEntry .1.3.6.1.4.1.18070.2.2.1.11.13.1 |
stsnProtSwOpEntryThe conceptual row object of the SONET STS-N protection
switching operation table. StsnProtSwOpEntry .1.3.6.1.4.1.18070.2.2.1.11.13.1.1 |
stsnProtSwOpTypeIdxThe specific type of STS-N signal targeted for the protection
switching operation. StsnType .1.3.6.1.4.1.18070.2.2.1.11.13.1.1.1 |
stsnProtSwOpShelfIdxThe number of the shelf of the STS-N facility targeted for the
protection switching operation. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.11.13.1.1.2 |
stsnProtSwOpSlotIdxThe number of the slot of the STS-N facility targeted for the
protection switching operation. INTEGER .1.3.6.1.4.1.18070.2.2.1.11.13.1.1.3 |
stsnProtSwOpPortIdxThe number of the port of the STS-N facility targeted for the
protection switching operation. INTEGER .1.3.6.1.4.1.18070.2.2.1.11.13.1.1.4 |
stsnProtSwOpIdxThe sts channel number of the STS-N facility targeted for the
protection switching operation. INTEGER .1.3.6.1.4.1.18070.2.2.1.11.13.1.1.5 |
stsnProtSwOpCmdUsed to perform a protection switch on a STS-N facility which
is part of a protection group pairing, as described in the
ProtSwOpCmd textual convention.rw ProtSwOpCmd .1.3.6.1.4.1.18070.2.2.1.11.13.1.1.6 |
stmnOperations OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.11.14 |
stmnLpbkOpTableThis table contains one row for every provisioned STM-N
facility on the NE to facilitate the performing of STM-N
facility loopback operations. SEQUENCE OF StmnLpbkOpEntry .1.3.6.1.4.1.18070.2.2.1.11.14.1 |
stmnLpbkOpEntryThe conceptual row object of the STM-N loopback operation
table. StmnLpbkOpEntry .1.3.6.1.4.1.18070.2.2.1.11.14.1.1 |
stmnLpbkOpTypeIdxThe specific type of STM-N signal which is targeted for the
loopback operation. StmnType .1.3.6.1.4.1.18070.2.2.1.11.14.1.1.1 |
stmnLpbkOpShelfIdxThe number of the shelf of the STM-N facility targeted for the
loopback operation. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.11.14.1.1.2 |
stmnLpbkOpSlotIdxThe number of the slot in which the STM-N facility targeted
for the loopback operation is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.11.14.1.1.3 |
stmnLpbkOpPortIdxThe number of the port on the circuit pack on which the STM-N
facility targeted for the loopback operation is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.11.14.1.1.4 |
stmnLpbkOpCmdUsed to perform a loopback operation on a STM-N facility as
follows:
- oprFacilityLpbk: operates an STM-N facility loopback
- oprTerminalLpbk: operates an STM-N terminal loopback
- rlsLpbk: releases a previously invoked loopback
Note that a terminal loopback can only be operated on a client
STM-N facility. When read, this object returns noOp.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.11.14.1.1.5 |
stmnProtSwOpTableThis table contains one row for every provisioned SDH STM-N
facility on the NE configured to be part of a protection group
pair to facilitate the performing of STM-N line protection
switching operations. SEQUENCE OF StmnProtSwOpEntry .1.3.6.1.4.1.18070.2.2.1.11.14.2 |
stmnProtSwOpEntryThe conceptual row object of the SDH STM-N facility
protection switching operation table. StmnProtSwOpEntry .1.3.6.1.4.1.18070.2.2.1.11.14.2.1 |
stmnProtSwOpTypeIdxThe specific rate of STM-N facility targeted for the
protection switching operation. StmnType .1.3.6.1.4.1.18070.2.2.1.11.14.2.1.1 |
stmnProtSwOpShelfIdxThe number of the shelf of the STM-N faacility targeted for
the protection switching operation. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.11.14.2.1.2 |
stmnProtSwOpSlotIdxThe number of the slot within which the STM-N facility
targeted for the protection switching operation is
provisioned. INTEGER (1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.11.14.2.1.3 |
stmnProtSwOpIdxThe number of the port on the circuit pack on which the STM-N
facility has been provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.11.14.2.1.4 |
stmnProtSwOpCmdUsed to perform a protection switch on a STM-N facility which
is configured to be a part of a protection group, as described
in the ProtSwOpCmd textual convention.rw ProtSwOpCmd .1.3.6.1.4.1.18070.2.2.1.11.14.2.1.5 |
vcnOperations OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.11.15 |
vcnProtSwOpTableThis table contains one row for every created SDH VC-N
facility on the system which is part of a protection group
pairing to facilitate the performing of VC-N protection
switching operations. SEQUENCE OF VcnProtSwOpEntry .1.3.6.1.4.1.18070.2.2.1.11.15.1 |
vcnProtSwOpEntryThe conceptual row object of the SDH VC-N protection switching
operation table. VcnProtSwOpEntry .1.3.6.1.4.1.18070.2.2.1.11.15.1.1 |
vcnProtSwOpTypeIdxThe specific type of VC-N signal targeted for the protection
switching operation. VcnType .1.3.6.1.4.1.18070.2.2.1.11.15.1.1.1 |
vcnProtSwOpShelfIdxThe number of the shelf of the VC-N facility targeted for the
protection switching operation. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.11.15.1.1.2 |
vcnProtSwOpSlotIdxThe number of the slot of the VC-N facility targeted for the
protection switching operation. INTEGER .1.3.6.1.4.1.18070.2.2.1.11.15.1.1.3 |
vcnProtSwOpPortIdxThe number of the port of the VC-N facility targeted for the
protection switching operation. INTEGER .1.3.6.1.4.1.18070.2.2.1.11.15.1.1.4 |
vcnProtSwOpIdxThe index number of the VC-N facility targeted for the
protection switching operation. INTEGER .1.3.6.1.4.1.18070.2.2.1.11.15.1.1.5 |
vcnProtSwOpCmdUsed to perform a protection switch on a VC-N facility which
is part of a protection group pairing, as described in the
ProtSwOpCmd textual convention.rw ProtSwOpCmd .1.3.6.1.4.1.18070.2.2.1.11.15.1.1.6 |
geOperations OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.11.16 |
geLpbkOpTableThis table contains one row for every provisioned Gigabit
Ethernet facility on the NE to facilitate the performing of GE
facility loopback operations. SEQUENCE OF GeLpbkOpEntry .1.3.6.1.4.1.18070.2.2.1.11.16.1 |
geLpbkOpEntryThe conceptual row object of the Gigabit Ethernet loopback
operation table. GeLpbkOpEntry .1.3.6.1.4.1.18070.2.2.1.11.16.1.1 |
geLpbkOpShelfIdxThe number of the shelf of the Gigabit Ethernet facility
targeted for the loopback operation. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.11.16.1.1.1 |
geLpbkOpSlotIdxThe number of the slot in which the Gigabit Ethernet facility
targeted for the loopback operation is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.11.16.1.1.2 |
geLpbkOpPortIdxThe number of the port on the circuit pack on which the
Gigabit Ethernet facility targeted for the loopback operation
is provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.11.16.1.1.3 |
geLpbkOpCmdUsed to perform a loopback operation on a Gigabit Ethernet
facility as follows:
- oprFacilityLpbk: operates an GE facility loopback
- oprFacilityLpbk: operates an GE terminal loopback
- rlsLpbk: releases a previously invoked loopback
When read, this object returns noOp.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.11.16.1.1.4 |
fcOperations OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.11.17 |
fcLpbkOpTableThis table contains one row for every provisioned Fiber
Channel facility on the NE to facilitate the performing of FC
facility loopback operations. SEQUENCE OF FcLpbkOpEntry .1.3.6.1.4.1.18070.2.2.1.11.17.1 |
fcLpbkOpEntryThe conceptual row object of the Fiber Channel loopback
operation table. FcLpbkOpEntry .1.3.6.1.4.1.18070.2.2.1.11.17.1.1 |
fcLpbkOpShelfIdxThe number of the shelf of the Fiber Channel facility targeted
for the loopback operation. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.11.17.1.1.1 |
fcLpbkOpSlotIdxThe number of the slot in which the Fiber Channel facility
targeted for the loopback operation is provisioned. INTEGER (1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.11.17.1.1.2 |
fcLpbkOpPortIdxThe number of the port on the circuit pack on which the Fiber
Channel facility targeted for the loopback operation is
provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.11.17.1.1.3 |
fcLpbkOpCmdUsed to perform a loopback operation on a Fiber Channel
facility as follows:
- oprFacilityLpbk: operates an FC facility loopback
- oprFacilityLpbk: operates an FC terminal loopback
- rlsLpbk: releases a previously invoked loopback
When read, this object returns noOp.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.11.17.1.1.4 |
briOperations OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.11.18 |
briLpbkOpTableThis table contains one row for every provisioned
Bit Rate Independent (BRI) facility on the NE to
facilitate the performing of BRI facility loopback
operations. SEQUENCE OF BriLpbkOpEntry .1.3.6.1.4.1.18070.2.2.1.11.18.1 |
briLpbkOpEntryThe conceptual row object of the BRI loopback
operation table. BriLpbkOpEntry .1.3.6.1.4.1.18070.2.2.1.11.18.1.1 |
briLpbkOpShelfIdxThe number of the shelf of the BRI facility targeted
for the loopback operation. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.11.18.1.1.1 |
briLpbkOpSlotIdxThe number of the slot in which the BRI facility
targeted for the loopback operation is provisioned. INTEGER (1|3|5|7|9|11|13|15|17|19) .1.3.6.1.4.1.18070.2.2.1.11.18.1.1.2 |
briLpbkOpPortIdxThe number of the port on the circuit pack on which the
BRI facility targeted for the loopback operation is
provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.11.18.1.1.3 |
briLpbkOpCmdUsed to perform a loopback operation on a BRI
facility as follows:
- oprFacilityLpbk: operates a BRI facility loopback
- oprFacilityLpbk: operates a BRI terminal loopback
- rlsLpbk: releases a previously invoked loopback
When read, this object returns noOp.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.11.18.1.1.4 |
synchronization OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.12 |
cpSynchronizationTableThis table contains one row for every provisioned circuit pack
that supports SONET synchronization configuration. SEQUENCE OF CpSynchronizationEntry .1.3.6.1.4.1.18070.2.2.1.12.1 |
cpSynchronizationEntryThe conceptual row object of the circuit pack synchronization
table. CpSynchronizationEntry .1.3.6.1.4.1.18070.2.2.1.12.1.1 |
cpSynchronizationTypeIdxThe specific type of circuit pack provisioned. CpType .1.3.6.1.4.1.18070.2.2.1.12.1.1.1 |
cpSynchronizationShelfIdxThe number of the shelf on which the circuit pack is
provisioned. INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.12.1.1.2 |
cpSynchronizationSlotIdxThe number of the slot in which the circuit pack is
provisioned. INTEGER .1.3.6.1.4.1.18070.2.2.1.12.1.1.3 |
cpSynchronizationTimingModeThe timing mode used for SONET synchronization on the pack.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.12.1.1.4 |
cpSynchronizationPrimRefSrcPortNumThe port number of the SONET facility that serves as the
primary timing reference source. When the value is 0, the
primary reference is not configured.rw INTEGER .1.3.6.1.4.1.18070.2.2.1.12.1.1.5 |
cpSynchronizationPrimRefProtStatusThe protection status of the primary timing reference source.ro ProtectionStatusType .1.3.6.1.4.1.18070.2.2.1.12.1.1.6 |
cpSynchronizationPrimProtStatQlfrA textual list of qualifiers of the reported protection status
of the primary timing reference source.ro OperStatQlfr .1.3.6.1.4.1.18070.2.2.1.12.1.1.7 |
cpSynchronizationSecRefSrcPortNumThe port number of the SONET facility that serves as the
secondary timing reference source. When the value is 0, the
secondary reference is not configured.rw INTEGER .1.3.6.1.4.1.18070.2.2.1.12.1.1.8 |
cpSynchronizationSecRefProtStatusThe protection status of the secondary timing reference
source.ro ProtectionStatusType .1.3.6.1.4.1.18070.2.2.1.12.1.1.9 |
cpSynchronizationSecProtStatQlfrA textual list of qualifiers of the reported protection status
of the secondary timing reference source.ro OperStatQlfr .1.3.6.1.4.1.18070.2.2.1.12.1.1.10 |
cpSynchronizationPrimRefBasicSSMUsed to enable basic Synchronization Status Messaging (SSM)
functionality on the primary timing reference source.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.12.1.1.11 |
cpSynchronizationSecRefBasicSSMUsed to enable basic Synchronization Status Messaging (SSM)
functionality on the primary timing reference source.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.12.1.1.12 |
cpSynchronizationSwEvtTypeIndicates the type of timing reference switching event that
has occurred on the circuit pack.ro SyncSwEvtType .1.3.6.1.4.1.18070.2.2.1.12.1.1.13 |
topology OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.13 |
networkNeighborTableThis table is used to store information on the network
neighbors of the local network element. Each row contains
information on a specific network neighbor. SEQUENCE OF NetworkNeighborEntry .1.3.6.1.4.1.18070.2.2.1.13.1 |
networkNeighborEntryThe conceptual row object of the network neighbor table. NetworkNeighborEntry .1.3.6.1.4.1.18070.2.2.1.13.1.1 |
networkNeighborIdxA textual identifier of the network neighbor. DisplayString .1.3.6.1.4.1.18070.2.2.1.13.1.1.1 |
networkNeighborIPAddrThe primary IP Address of the network neighbor.rw IpAddress .1.3.6.1.4.1.18070.2.2.1.13.1.1.2 |
networkNeighborRowStatusUsed to control the addition and deletion of entries in the
network neighbor table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.13.1.1.3 |
ospfGeneralTableThis table contains all of general OSPF parameters
for the network element. The group can be created
and deleted but only one entry can exist in the table. SEQUENCE OF OspfGeneralGroupEntry .1.3.6.1.4.1.18070.2.2.1.13.2 |
ospfGeneralGroupEntryThe list entry for the OSPF General Group parameters. OspfGeneralGroupEntry .1.3.6.1.4.1.18070.2.2.1.13.2.1 |
ospfIdxAn index used to identify the OSPF instance in order to
alow for creation and deletion to allow compatibility with
TL1 and CLI interfaces. Note the value is always 1. INTEGER (1) .1.3.6.1.4.1.18070.2.2.1.13.2.1.1 |
ospfRouterIdA 32-bit integer uniquely identifying the router.
By convention, to ensure uniqueness, this
should default to the value of one of the
router's IP interface addresses.
This object is persistent.rw IpAddress .1.3.6.1.4.1.18070.2.2.1.13.2.1.2 |
ospfAdminStatThe administrative status of OSPF in the
router. The value 'enabled' denotes that the
OSPF Process is active on at least one interface;
'disabled' disables it on all interfaces.
This object is persistent.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.13.2.1.3 |
ospfVersionNumberThe current version number of the OSPF protocol is 2.ro Enumeration .1.3.6.1.4.1.18070.2.2.1.13.2.1.4 |
ospfAreaBdrRtrStatusA flag to note whether this router is an Area Border Router.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.13.2.1.5 |
ospfRouteRedistIndicates the extent of route redistribution.
Static - static routes,
Connected - routes connected to the node.
DefOrig - default routes from adjacent nodes.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.13.2.1.6 |
ospfAreaIdThe area ID associated with this OSPF item.
Note that although the area ID has the format of an
IP Address it is not actually an IP address.rw IpAddress .1.3.6.1.4.1.18070.2.2.1.13.2.1.7 |
ospfRowStatusUsed to control the addition and deletion of the
ospf General Group parameters.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.13.2.1.8 |
ospfIfTableThe OSPF Interface Table describes the interfaces
from the viewpoint of OSPF. SEQUENCE OF OspfIfEntry .1.3.6.1.4.1.18070.2.2.1.13.3 |
ospfIfEntryThe OSPF interface entry describes one interface
from the viewpoint of OSPF.
Information in this table is persistent and when this object
is written the entity is saved to non-volatile
storage. OspfIfEntry .1.3.6.1.4.1.18070.2.2.1.13.3.1 |
ospfIfSwitchIdThe number of the switch id on which the OSPF interface
exists. Set to zero if the switchId a switch Id is not
applicable for identification of the OSPF interface.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.13.3.1.1 |
ospfIfShelfIdxThe number of the shelf on which the OSPF interface exists.ro INTEGER (1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.13.3.1.2 |
ospfIfSlotIdxThe number of the slot within the shelf corresponding to
the OSPF interface.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.13.3.1.3 |
ospfIfTypeThe type of the interface corresponding to the OSPF
interface. Set to zero if the ospfIfType is not applicable
for identification of the OSPF interface.ro PvxPortType .1.3.6.1.4.1.18070.2.2.1.13.3.1.4 |
ospfIfIdxThe number of the interface within the slot corresponding
to the OSPF interface.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.13.3.1.5 |
ospfIfSubIdxThe number of the sub-interface that the OSFP Interface
corresponds to. Set to zero if the ospfIfSubIdx is not
applicable for identification of the OSPF interface.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.13.3.1.6 |
ospfIfAreaIdA 32-bit integer uniquely identifying the area
to which the interface connects. Area ID
0.0.0.0 is used for the OSPF backbone.ro AreaID .1.3.6.1.4.1.18070.2.2.1.13.3.1.7 |
ospfIfAdminStatThe OSPF interface's administrative status.
The value formed on the interface, and the interface
will be advertised as an internal route to some area.
The value 'disabled' denotes that the interface is
external to OSPF.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.13.3.1.8 |
ospfIfRtrPriorityThe priority of this interface. Used in
multi-access networks, this field is used in
the designated router election algorithm. The
value 0 signifies that the router is not eligible
to become the designated router on this particular
network. In the event of a tie in this value,
routers will use their Router ID as a tie breaker.rw INTEGER (0..'FF'h) .1.3.6.1.4.1.18070.2.2.1.13.3.1.9 |
ospfIfTransitDelayThe estimated number of seconds it takes to
transmit a link state update packet over this
interface. Note that the minimal value SHOULD be
1 second.rw INTEGER .1.3.6.1.4.1.18070.2.2.1.13.3.1.10 |
ospfIfRetransIntervalThe number of seconds between link state advertisement
retransmissions, for adjacencies belonging to this
interface. This value is also used when retransmitting
database description and Link State request packets.
Note that minimal value SHOULD be 1 second.rw INTEGER .1.3.6.1.4.1.18070.2.2.1.13.3.1.11 |
ospfIfHelloIntervalThe length of time, in seconds, between the Hello packets
that the router sends on the interface. This value must be
the same for all routers attached to a common network.rw INTEGER ( 1..'FFFF'h ) UNITS "seconds" .1.3.6.1.4.1.18070.2.2.1.13.3.1.12 |
ospfIfRtrDeadIntervalThe number of seconds that a router's Hello packets have
not been seen before its neighbors declare the router down.
This should be some multiple of the Hello interval. This
value must be the same for all routers attached to a common
network.rw INTEGER ( 0..'7FFFFFFF'h ) UNITS "seconds" .1.3.6.1.4.1.18070.2.2.1.13.3.1.13 |
ospfIfMetricValueA metric used to identify the 'cost' associated with using
this interface.rw INTEGER (0..'FFFF'h) .1.3.6.1.4.1.18070.2.2.1.13.3.1.14 |
ospfIfStatusThis object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.13.3.1.15 |
ospfLsdbTableThe OSPF Process's link state database (LSDB).
The LSDB contains the link state advertisements
from throughout the areas that the device is attached to. SEQUENCE OF OspfLsdbEntry .1.3.6.1.4.1.18070.2.2.1.13.4 |
ospfLsdbEntryA single link state advertisement. OspfLsdbEntry .1.3.6.1.4.1.18070.2.2.1.13.4.1 |
ospfLsdbAreaIdThe 32-bit identifier of the area from which
the LSA was received.ro AreaID .1.3.6.1.4.1.18070.2.2.1.13.4.1.1 |
ospfLsdbTypeThe type of the link state advertisement.
Each link state type has a separate advertisement
formatro Enumeration .1.3.6.1.4.1.18070.2.2.1.13.4.1.2 |
ospfLsdbLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or an IP address;
it identifies the piece of the routing domain
that is being described by the advertisement.ro IpAddress .1.3.6.1.4.1.18070.2.2.1.13.4.1.3 |
ospfLsdbRouterIdThe 32-bit number that uniquely identifies the
originating router in the Autonomous System.ro IpAddress .1.3.6.1.4.1.18070.2.2.1.13.4.1.4 |
ospfLsdbSequenceThe sequence number field is a signed 32-bit
integer. It starts with the value '80000001'h,
or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
Thus, a typical sequence number will be very negative.
It is used to detect old and duplicate Link State
Advertisements. The space of sequence numbers is linearly
ordered. The larger the sequence number, the more recent
the advertisement.ro Integer32 .1.3.6.1.4.1.18070.2.2.1.13.4.1.5 |
ospfLsdbAgeThis field is the age of the link state advertisement
in seconds.ro Integer32 UNITS "seconds" .1.3.6.1.4.1.18070.2.2.1.13.4.1.6 |
ospfLsdbChecksumThis field is the checksum of the complete contents of
the advertisement, excepting the age field. The age field
is excepted so that an advertisement's age can be
incremented without updating the checksum. The checksum
used is the same that is used for ISO connectionless
datagrams; it is commonly referred to as the
Fletcher checksum.ro Integer32 .1.3.6.1.4.1.18070.2.2.1.13.4.1.7 |
ospfNbrTableA table describing all non-virtual neighbors
in the locality of the OSPF router. SEQUENCE OF OspfNbrEntry .1.3.6.1.4.1.18070.2.2.1.13.5 |
ospfNbrEntryThe information regarding a single neighbor.
Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage. OspfNbrEntry .1.3.6.1.4.1.18070.2.2.1.13.5.1 |
ospfNbrIpAddrThe IP address this neighbor is using in its
IP source address. Note that, on addressless
links, this will not be 0.0.0.0 but the
address of another of the neighbor's interfaces.ro IpAddress .1.3.6.1.4.1.18070.2.2.1.13.5.1.1 |
ospfNbrAddressLessIndexOn an interface having an IP address, zero.
On addressless interfaces, the corresponding
value of ifIndex in the Internet Standard MIB.
On row creation, this can be derived from the
instance.ro Integer32 .1.3.6.1.4.1.18070.2.2.1.13.5.1.2 |
ospfNbrRtrIdA 32-bit integer (represented as a type
IpAddress) uniquely identifying the neighboring
router in the Autonomous System.ro IpAddress .1.3.6.1.4.1.18070.2.2.1.13.5.1.3 |
ospfNbrOptionsA bit mask corresponding to the neighbor's
options field.
Bit 0, if set, indicates that the system will
operate on Type of Service metrics other than
TOS 0. If zero, the neighbor will ignore all
metrics except the TOS 0 metric.
Bit 1, if set, indicates that the associated
area accepts and operates on external
information; if zero, it is a stub area.
Bit 2, if set, indicates that the system is
capable of routing IP multicast datagrams, that is
that it implements the multicast extensions to
OSPF.
Bit 3, if set, indicates that the associated
area is an NSSA. These areas are capable of
carrying type-7 external advertisements, which
are translated into type-5 external advertisements
at NSSA borders.ro Integer32 .1.3.6.1.4.1.18070.2.2.1.13.5.1.4 |
ospfNbrPriorityThe priority of this neighbor in the designated
router election algorithm. The value 0 signifies
that the neighbor is not eligible to become
the designated router on this particular network.ro DesignatedRouterPriority .1.3.6.1.4.1.18070.2.2.1.13.5.1.5 |
ospfNbrStateThe state of the relationship with this neighbor.ro Enumeration .1.3.6.1.4.1.18070.2.2.1.13.5.1.6 |
pvxObjects OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.14 |
pvxBridge OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.14.1 |
pvxL2IntfTableThis table contains one row for every provisioned Ethernet
facility on the system. Each row contains a list of attributes
that pertain to the facility. SEQUENCE OF PVXL2IntfEntry .1.3.6.1.4.1.18070.2.2.1.14.1.3 |
pvxL2IntfEntryThe conceptual row object of the ethIntfTable table. PVXL2IntfEntry .1.3.6.1.4.1.18070.2.2.1.14.1.3.1 |
pvxL2IntfSwitchIdxThe number of the switch id of the provisioned ethernet
facility.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.1 |
pvxL2IntfShelfIdxThe number of the shelf id of the provisioned ethernet
facility.ro INTEGER (0|1|11|21|31) .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.2 |
pvxL2IntfSlotIdxThe number of the instance id of the provisioned ethernet
facility.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.3 |
pvxL2IntfPortTypeIdxThe number of the instance id of the provisioned ethernet
facility.ro PvxPortType .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.4 |
pvxL2IntfPortIdxThe number of the port on the circuit pack on which the
ethernet facility is provisioned.ro INTEGER .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.5 |
pvxL2IntfAdminStatusThe administrative status of the Ethernet facility.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.6 |
pvxL2IntfOperStatusThe reported operational status of the Ethernet facility.ro OperStatus .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.7 |
pvxL2IntfTypeThis object is used to configure the type of a interface.rw Enumeration .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.8 |
pvxL2IntfSTpidThe Ethernet type (TPID) of the S-TAGrw Enumeration .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.9 |
pvxL2IntfPvidThe PVID (port-based VLAN ID) for the portrw INTEGER .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.10 |
pvxL2IntfDefaultPriorityThis object sets the default priority of the interface.rw INTEGER .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.11 |
pvxL2IntfAllowedFramesTODO: Does this feild need to support OR of the options?rw Enumeration .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.12 |
pvxL2IntfIngressFilteringWhen this is true(1) the device will discard incoming frames
for VLANs which do not include this Port in its Member set.
When false(2), the port will accept all incoming frames.
This control does not affect VLAN independent BPDU frames,
such as GVRP and STP. It does affect VLAN dependent BPDU
frames, such as GMRP.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.13 |
pvxL2IntfCtrlFrmProfileIdrwdeprecated Integer32 .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.14 |
pvxL2IntfMACAddrThe MAC address of the interface.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.15 |
pvxL2IntfRateLimitThis represents the interface rate limit in kilobits/s.rw Integer32 .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.16 |
pvxL2IntfCoSProfileIdThis represents the Class of service profile for the
interface.rw Integer32 .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.17 |
pvxL2IntfIsUNIThe Switch port type. The default value set by the switch is neither.ro Enumeration .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.18 |
pvxL2IntfSchedProfNameThe scheduler profile used by the interface.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.19 |
pvxL2IntfPriTCMapProfNameThe priority to traffic class map profile used by the interface.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.20 |
pvxL2IntfPCPCodingProfNameThe scheduler profile used by the interface.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.21 |
pvxL2IntfDscpPHBProfNameThe internal priority setting for DSCP profile used by the interface.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.22 |
pvxL2IntfCtrlFrmProfileNameThe L2 control frame profile used by the interface.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.23 |
pvxL2IntfUseDeiUsed by PNP port. By default, it is set to false by the switch.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.24 |
pvxL2IntfIngressBandwidthProfileThe ingress policy map profile used by the interface.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.25 |
pvxL2IntfEgressBandwidthProfileThe egress policy map profile used by the interface.rw DisplayString .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.26 |
pvxL2IntfTrustIncomingPCPUsed by all port type. By default, it is set to true by the switch.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.27 |
pvxL2IntfTrustIncomingDscpUsed by all port type. By default, it is set to true by the switch.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.28 |
pvxL2IntfBcastLimitBroadcast rate limit as percentage of the line rate for
the port with default value of 100 (no storm control).rw INTEGER (20|40|60|100) .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.29 |
pvxL2IntfMcastLimitMulticast rate limit as percentage of the line rate for
the port with default value of 100 (no storm control).rw INTEGER (20|40|60|100) .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.30 |
pvxL2IntfDlfLimitUnicast DLF rate limit as percentage of the line rate for
the port with default value of 100 (no storm control).rw INTEGER (20|40|60|100) .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.31 |
pvxL2IntfRowStatusUsed to control the addition and deletion of entries in the
PVX L2 Interface table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.100 |
pvxNotificationObjects OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.14.4 |
mstpNotificationObjects OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.14.4.1 |
miscellaneous OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.15 |
setErrorInfo OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.15.1 |
setErrorCodeThe BTI-specific error code for the set request failure.rw Integer32 .1.3.6.1.4.1.18070.2.2.1.15.1.1 |
setErrorDescA textual description string that explains the reason
for the failed set request.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.1.15.1.2 |
opticalLayer OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.1.16 |
notifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2 |
eventNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1 |
evtNotificationObjects OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.1 |
evtDateAndTimeThe date and time at which an event notification was issued by
the system.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.2.1.1.1 |
tcaIntervalTypeThe type of PM bin according to interval length during which a
performance monitoring threshold crossing occurred.ro PMIntervalType .1.3.6.1.4.1.18070.2.2.2.1.1.2 |
tcaDateAndTimeThe date and time of the performance monitoring interval for
which a performance monitoring threshold crossing alert is
generated.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.2.1.1.3 |
tcaMontypeIdentify the performance monitoring monitored type for which a
threshold crossing alert is generated.ro PMMontype .1.3.6.1.4.1.18070.2.2.2.1.1.4 |
tcaValueThe measured value of the monitored type for which a
performance monitoring threshold crossing alert is generated.ro Unsigned32 .1.3.6.1.4.1.18070.2.2.2.1.1.5 |
tcaThresholdThe threshold for the monitored type that was exceeded
resulting in the generation of a performance monnitoring
threshold crossing alert.ro Unsigned32 .1.3.6.1.4.1.18070.2.2.2.1.1.6 |
evtDescriptionA textual decription of the event.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.2.1.1.7 |
evtObjectTypeIdentifies the type of managed object against which the
event notification is raised.ro NotifObjectType .1.3.6.1.4.1.18070.2.2.2.1.1.8 |
evtCodeTypeThis object value uniquely identifies the type of event
that has been generated.ro NotifCodeType .1.3.6.1.4.1.18070.2.2.2.1.1.9 |
neEvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.2 |
shelfInvEvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.3 |
shelfInvPluginEvtA shelf has been detected through the shelf interconnect. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.3.0.1 |
shelfInvUnpluginEvtA previously detected shelf is no longer detected through the
shelf interconnect. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.3.0.2 |
slotInvEvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.4 |
slotInvPluginEvtA circuit pack has been inserted into the identified slot. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.4.0.1 |
slotInvUnpluginEvtA circuit pack has been removed from the identified slot. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.4.0.2 |
slotInvUpgradeStageResultEvtThe software upgrade process on the circuit pack in the
identified slot has completed a stage. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.4.0.3 |
shelfEvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.5 |
shelfStatusChangeEvtNotification of a change in the shelf's operational status or
operational status qualifier. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.5.0.1 |
cpEvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.6 |
cpStatusChangeEvtNotification of a change in the circuit pack's operational
status or operational status qualifier. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.6.0.1 |
cpCheckUpgradeResultEvtIndicates the result of the check upgrade step of the
system-wide software upgrade process. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.6.0.2 |
cpUpgradeTransferResultEvtIndicates the result of the software download step of the
system-wide software upgrade process. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.6.0.3 |
cpUpgradeStageResultEvtThe software upgrade process on the active circuit pack in the
identified slot has completed a stage. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.6.0.4 |
cpDbBackupResultEvtIndicates the result of an NE database backup operation. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.6.0.5 |
cpDbRestoreTransferResultEvtIndicates the result of the database download step of the NE
database restore process. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.6.0.6 |
cpDbInvokeResultEvtIndicates the result of the invoke step of the NE database
restore process. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.6.0.7 |
cpDbApplyResultEvtIndicates the result of the accept step of the NE database
restore process. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.6.0.8 |
oaEvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.7 |
oaStatusChangeEvtNotification of a change in the optical amplifier's
operational status or operational status qualifier. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.7.0.1 |
dataCommsEvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.8 |
oscStatusChangeEvtNotification of a change in the optical supervisory channels's
operational status or operational status qualifier. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.8.0.1 |
netMgmtStatusChangeEvtNotification of a change in the network management interface's
operational status or operational status qualifier. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.8.0.2 |
pluggableInvEvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.9 |
pluggableInvPluginEvtA pluggable transceiver has been inserted into the identified
port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.9.0.1 |
pluggableInvUnpluginEvtA pluggable transceiver has been removed from the identified
port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.9.0.2 |
xcvrEvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.10 |
xcvrStatusChangeEvtNotification of a change in the transceiver's operational
status or operational status qualifier. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.10.0.1 |
xcvrProtSwitchEvtA protection switch has occured on the optical transceiver
facility. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.10.0.2 |
xcvrTcaEvtThis trap provides a threshold crossing alert for a
performance monitoring statistic on an optical transceiver
port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.10.0.3 |
adminEvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.11 |
amdEvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.12 |
amdStatusChangeEvtNotification of a change in the operational status or
operational status qualifier of an active
multiplexer-demultiplexer port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.12.0.1 |
ocnEvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.13 |
ocnStatusChangeEvtNotification of a change in the operational status or
operational status qualifier of a SONET OC-N facility port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.13.0.1 |
ocnTcaEvtThis trap provides a threshold crossing alert for a
performance monitoring statistic on a SONET OC-N facility. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.13.0.2 |
ocnProtSwitchEvtA protection switch has occured on the identified OC-N
facility. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.13.0.3 |
stsnEvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.14 |
stsnProtSwitchEvtA protection switch has occured on the identified STS-N
channel. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.14.0.2 |
stsnTcaEvtThis trap provides a threshold crossing alert for a
performance monitoring statistic on a SONET STS-N facility. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.14.0.3 |
stmnEvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.15 |
stmnStatusChangeEvtNotification of a change in the operational status or
operational status qualifier of a SDH STM-N facility port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.15.0.1 |
stmnTcaEvtThis trap provides a threshold crossing alert for a
performance monitoring statistic on a SDH STM-N facility. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.15.0.2 |
stmnProtSwitchEvtA protection switch has occured on the identified STM-N
facility. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.15.0.3 |
vcnEvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.16 |
vcnProtSwitchEvtA protection switch has occured on the identified VC-N
channel. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.16.0.2 |
vcnTcaEvtThis trap provides a threshold crossing alert for a
performance monitoring statistic on a SDH VC-N facility. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.16.0.3 |
geEvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.17 |
geStatusChangeEvtNotification of a change in the operational status or
operational status qualifier of a Gigabit Ethernet facility
port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.17.0.1 |
geTcaEvtThis trap provides a threshold crossing alert for a
performance monitoring statistic on a Gigabit Ethernet
facility. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.17.0.2 |
fcEvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.18 |
fcStatusChangeEvtNotification of a change in the operational status or
operational status qualifier of a Fiber Channel facility
port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.18.0.1 |
fcTcaEvtThis trap provides a threshold crossing alert for a
performance monitoring statistic on a Fiber Channel facility. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.18.0.2 |
ethPortEvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.21 |
ethL1IFStatusChangeEvtNotification of a change in the operational status or
operational status qualifier of a L1 Ethernet facility
port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.21.0.1 |
ethL1IFTcaEvtThis trap provides a threshold crossing alert for a
performance monitoring statistic on an Ethernet Layer 1
interface facility. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.21.0.2 |
pvxL2EvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.22 |
pvxL2IFTcaEvtThis trap provides a threshold crossing alert for a
performance monitoring statistic on a PVX Pack Ethernet Layer 2
interface facility. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.22.0.2 |
mstpEvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.23 |
briEvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.24 |
briStatusChangeEvtNotification of a change in the operational status or
operational status qualifier of a BRI facility port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.24.0.1 |
cpSynchronizationEvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.25 |
cpSynchronizationSwitchEvtA synchronization timing reference switch has occurred
on the identified circuit pack. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.25.0.1 |
pvxESrvcBWPrflEvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.26 |
pvxESrvcEvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.27 |
pvxERPSSrvcNNIEvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.28 |
pvxERPSSrvcEvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.29 |
pvxSlaMsmtEvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.30 |
ntpcEvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.31 |
ntpTimeAndDateUpdateEvtThis event occurs when the NTP client updates the system date and time
based on a selected reference clocks source. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.31.0.1 |
ntpTimingRefUpdateEvtThis event occurs when the NTP client has selected a reference clock
source from a list provided. This is the NTP association list. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.31.0.2 |
pvxSUniEvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.32 |
olEvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.33 |
pvxLldpEvtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.1.34 |
pvxLldpRemTablesChangeEvtA pvxLldpRemTablesChangeEvt notification is sent when the value
of pvxLldpStatsRemTablesLastChangeTime changes. It can be
utilized by an NMS to trigger LLDP remote systems table
maintenance polls. Note that transmission of lldpRemTablesChange
notifications are throttled by the agent.
The agent must not generate more than one lldpRemTablesChange
notification-event in the indicated period, where a
'notification-event' is the transmission of a single
notification PDU type to a list of notification destinations.
If additional changes in lldpRemoteSystemsData object
groups occur within the indicated throttling period,
then these trap- events must be suppressed by the
agent.
By default the throttling period is set to 10 seconds. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.1.34.0.1 |
conditionNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.2 |
neCondNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.2.1 |
shelfInvCondNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.2.2 |
shelfInvMissingCondAn expansion shelf is missing. To clear this condition, attach
an appropriate expansion shelf to the MSCP in the main shelf
of the system. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.2.0.1 |
shelfInvMissingClearA previously active shelf missing condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.2.0.2 |
shelfInvUnknownCondA shelf is unknown to the system. This condition occurs
because the shelf is unknown to the system (for example, the
the FRU data cannot be read on the expansion shelf interface
(ESI) circuit pack in the expansion shelf). To clear this
condition, connect an appropriate shelf to its associated
MSCP. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.2.0.3 |
shelfInvUnknownClearA previously active shelf unknown condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.2.0.4 |
shelfInvCommCondThis condition indicates that a connected expansion shelf has
a communications failure between the multiport system control
processor (MSCP) and the expansion shelf interface (ESI)
circuit packs. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.2.0.5 |
shelfInvCommClearA previously active shelf communications condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.2.0.6 |
shelfInvPwrFeedAFailCondThere is a power feed A failure. The system can continue to
function on power feed B. Plan to diagnose and correct the
problem as soon as possible. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.2.0.7 |
shelfInvPwrFeedAFailClearA previously active Power feed A condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.2.0.8 |
shelfInvPwrFeedBFailCondThere is a power feed B failure. The system can continue to
function on power feed A. Plan to diagnose and correct the
problem as soon as possible. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.2.0.9 |
shelfInvPwrFeedBFailClearA previously active Power feed B condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.2.0.10 |
shelfInvPwrBrownoutCondThere is a system power brownout. As voltage levels decrease,
the amplifiers fail, followed by the MSCP, and then the
cooling unit fails. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.2.0.11 |
shelfInvPwrBrownoutClearA previously active power brownout condition on the shelf has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.2.0.12 |
shelfInvSysCommCondThis condition indicates that backplane communication between
the multiport system control processor (MSCP) and the affected
circuit pack is interrupted. Normal OAM&P operations to the
circuit pack, like provisioning and performance monitoring,
are affected while this alarm is active. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.2.0.13 |
shelfInvSysCommClearA previously active shelf missing condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.2.0.14 |
shelfInvExpansionShelfIdMismatchCondIndicates that the identifying information of the discovered
expansion shelf does not match that of the expected shelf. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.2.0.15 |
shelfInvExpansionShelfIdMismatchClearA previously active expansion shelf identifier mismatch
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.2.0.16 |
shelfInvExpansionShelfCommLOSCondThis alarm indicates that a connected expansion shelf has a
loss of signal between the multiport system control processor
(MSCP) and the expansion shelf interface (ESI) circuit packs.
The most likely causes are a fiber cut or a fault with the
Molex connector and cable assembly. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.2.0.17 |
shelfInvExpansionShelfCommLOSClearA previously active expansion shelf communications LOS
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.2.0.18 |
shelfInvExpansionShelfCommLinkDownCondThis alarm indicates that a connected expansion shelf has a
communications failure between the multiport system control
processor (MSCP) and the expansion shelf interface (ESI)
circuit packs. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.2.0.19 |
shelfInvExpansionShelfCommLinkDownClearA previously active expansion shelf communications link down
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.2.0.20 |
shelfInvExpansionShelfCommDeviceUnsupportedCondThis alarm indicates that an unknown device is connected to
the expansion shelf port of the multiport system control
processor (MSCP) on the main shelf. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.2.0.21 |
shelfInvExpansionShelfCommDeviceUnsupportedClearA previously active expansion shelf communications device
unsupported condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.2.0.22 |
shelfInvTempMaxCondIndicates that the temperature on the identified shelf has
risen above the maximum threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.2.0.23 |
shelfInvTempMaxClearA previously active shelf inventory maximum temperature
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.2.0.24 |
slotInvCondNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.2.3 |
slotInvMissingCondA Circuit pack is missing. The alarm is triggered for one of
the following reasons: the provisioned circuit pack is missing
from its associated slot a filler circuit pack is missing from
an unprovisioned single-width or doublewidth slot a
single-width circuit pack is provisioned in a double-width
slot To clear this alarm, insert an appropriate single-width
or double-width circuit pack or filler circuit pack in the
associated single-width or double-width slot. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.1 |
slotInvMissingClearA previously active circuit pack or replaceable unit missing
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.2 |
slotInvUnknownCondCircuit pack type is unknown to the system. This condition
occurs for the following two reasons: the circuit pack in the
associated slot is unknown to the system (for example, the
circuit pack is not supported by the software release running
on the system) two single-width circuit packs are in a
double-width slot To clear this condition, insert an
appropriate circuit pack in the associated slot. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.3 |
slotInvUnknownClearA previously active circuit pack or replaceable unit unknown
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.4 |
slotInvCommCondThis alarm indicates that backplane communication between the
multiport system control processor (MSCP) and the circuit pack
is interrupted. Normal OAM&P operations to the circuit pack,
like provisioning and performance monitoring, are affected
while this alarm is active. If an amplifier or wavelength
conversion circuit pack has been provisioned already, it
continues to operate normally. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.5 |
slotInvCommClearA previously active circuit pack communications condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.6 |
slotInvFailCondThere is a circuit pack failure. The alarm is critical when a
circuit pack is provisioned and that it has fails in its
associated slot. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.7 |
slotInvFailClearA previously active circuit pack fail condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.8 |
slotInvUpgradeInProgressCondA software upgrade process has begun on the circuit pack in
the identified slot. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.9 |
slotInvUpgradeInProgressClearThere is an auto upgrade in progress. This alarm is typically
seen when inserting a circuit pack other than a multiport
system control processor (MSCP). NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.10 |
slotInvUpgradeFailureCondThere is a circuit pack upgrade failure. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.11 |
slotInvUpgradeFailureClearA previously active circuit pack software upgrade failure
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.12 |
slotInvVersionMismatchCondThe circuit pack in the indicated slot is running a software
version which is inconsistent with the committed software
version of the system. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.13 |
slotInvVersionMismatchClearA previously active circuit pack software version mismatch
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.14 |
slotInvCoolingUnitFailCondA cooling unit failure has occurred. One or more fans have
failed in the cooling unit. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.15 |
slotInvCoolingUnitFailClearA previously active shelf cooling unit failure condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.16 |
slotInvDspCommCondThis alarm indicates that communication has failed either
between the DSP and the processor handling backplane
communications on an optical amplifier circuit pack, or
between the variable optical equalizer (VOE) and the processor
handling backplane communications on an active mux/demux
circuit pack Normal OAM&P operations to the circuit pack, like
provisioning and performance monitoring, is affected when this
alarm is active. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.17 |
slotInvDspCommClearA previously active DSP control communications condition has
been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.18 |
slotInvUnsupportedPackCondA replaceable unit inventory item is unsupported. In this
case, a multiport system control processor (MSCP) circuit pack
is plugged into any slot of the expansion shelf. However,
MSCPs are only supported in slot five of the main shelf. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.19 |
slotInvUnsupportedPackClearA previously active unsupported pack condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.20 |
slotInvCoolingUnitMismatchCondThe shelf is plugged in with a wring cooling unit. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.21 |
slotInvCoolingUnitMismatchClearA previously active cooling unit mismatch condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.22 |
slotInvPwrFeedAFuseFailCondThere is a circuit pack failure. The alarm is critical when a
circuit pack is provisioned and that it has fails in its
associated slot. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.23 |
slotInvPwrFeedAFuseFailClearA previously active circuit pack fail condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.24 |
slotInvPwrFeedBFuseFailCondThere is a circuit pack failure. The alarm is critical when a
circuit pack is provisioned and that it has fails in its
associated slot. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.25 |
slotInvPwrFeedBFuseFailClearA previously active circuit pack fail condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.26 |
slotInvPowerFailCondThere is a circuit pack failure. The alarm is critical when a
circuit pack is provisioned and that it has fails in its
associated slot. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.27 |
slotInvPowerFailClearA previously active circuit pack fail condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.28 |
slotInvHiTempAutoShutdownCondThere is a circuit pack failure. The alarm is critical when a
circuit pack is provisioned and that it has fails in its
associated slot. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.29 |
slotInvHiTempAutoShutdownClearA previously active circuit pack fail condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.30 |
slotInvHTThreshExceededCondThere is a circuit pack failure. The alarm is critical when a
circuit pack is provisioned and that it has fails in its
associated slot. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.31 |
slotInvHTThreshExceededClearA previously active circuit pack fail condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.32 |
slotInvHTSThreshExceededCondThere is a circuit pack failure. The alarm is critical when a
circuit pack is provisioned and that it has fails in its
associated slot. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.33 |
slotInvHTSThreshExceededClearA previously active circuit pack fail condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.34 |
slotInvHTASUnsupportedCondThere is a circuit pack failure. The alarm is critical when a
circuit pack is provisioned and that it has fails in its
associated slot. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.35 |
slotInvHTASUnsupportedClearA previously active circuit pack fail condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.3.0.36 |
shelfCondNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.2.4 |
shelfMismatchCondThe type of the physically detected shelf does not match the
provisioned shelf type. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.4.0.1 |
shelfMismatchClearA previously active shelf type mismatch condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.4.0.2 |
shelfMissingCondAn expansion shelf is missing. To clear this alarm, attach an
appropriate expansion shelf to the MSCP in the main shelf of
the system. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.4.0.3 |
shelfMissingClearA previously active expansion shelf missing condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.4.0.4 |
shelfConfigurationMismatchCondThe configuration type of the physically detected expansion
shelf does not match the provisioned expansion shelf
configuration type. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.4.0.5 |
shelfConfigurationMismatchClearA previously active expansion shelf configuration mismatch
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.4.0.6 |
cpCondNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.2.5 |
cpMismatchCondThere is a circuit pack mismatch. There is a mismatch between
the equipment provisioned for the slot and the physical
circuit pack that is inserted in the slot. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.5.0.1 |
cpMismatchClearA previously active circuit pack type mismatch condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.5.0.2 |
cpConnectorMismatchCondA connector mismatch alarm occurs on a circuit pack that is
provisioned with a connector type that is different to the one
actually inserted. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.5.0.3 |
cpConnectorMismatchClearA previously active optical fiber connector type mismatch
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.5.0.4 |
cpInvalidProvCondThe type of circuit pack that is provisioned in a slot that is
invalid for the shelf slot configuration. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.5.0.5 |
cpInvalidProvClearA previously active invalid circuit pack provisioning
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.5.0.6 |
cpSoftwareBankAFailCondThere is a hardware failure in software bank A storage device.
During this alarm, software backups, upgrades and restores
cannot occur. When the MSCP is rebooting, the LEDs on the MSI
and the MSCP are lit. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.5.0.7 |
cpSoftwareBankAFailClearA previously active software Bank A failure condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.5.0.8 |
cpSoftwareBankBFailCondThere is a hardware failure in software bank B storage device.
During this alarm, software backups, upgrades, and restores
cannot occur. When the MSCP is rebooting, the LEDs on the MSI
and the MSCP are lit. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.5.0.9 |
cpSoftwareBankBFailClearA previously active software Bank B failure condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.5.0.10 |
cpUpgradeInProgressCondIndicates that a system-wide software upgrade process is in
progress on the NE. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.5.0.11 |
cpUpgradeInProgressClearA previously active system-wide upgrade in progress condition
has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.5.0.12 |
cpUpgradeFailCondIndicates that the system-wide upgrade procedure has failed to
complete successfully. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.5.0.15 |
cpUpgradeFailClearA previously active circuit pack upgrade failure condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.5.0.16 |
cpDbRestoreInProgressCondThere is a database restore in progress on the system. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.5.0.17 |
cpDbRestoreInProgressClearA previously active NE database restore condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.5.0.18 |
cpDbRecoveryFailCondThere is a database recovery failure. If a new MSCP circuit
pack fails to acquire the database from the system, a database
recovery failure alarm can be triggered after replacing the
MSCP. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.5.0.19 |
cpDbRecoveryFailClearA previously active NE database recovery failure condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.5.0.20 |
cpFanFeedFailCondA cooling unit feed failure has occurred on a BTI 7030 shelf.
There are two cooling unit power feeds from the SCP to the
cooling unit. If one power feeds fails, a minor alarm is
raised. If both power feed fails, a major alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.5.0.21 |
cpFanFeedFailClearA previously active fan power feed failure condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.5.0.22 |
cpStorageCardFailCondIndicates that the database storage card has failed. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.5.0.23 |
cpStorageCardFailClearA previously active database storage card failure condition
has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.5.0.24 |
cpDbDeletionInProgressCondThere is a database deletion in progress on the system. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.5.0.25 |
cpDbDeletionInProgressClearA previously active NE database deletion condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.5.0.26 |
cpDegradeCondIndicates that a failure or degradation has been detected
in one or more physical components on the identified
circuit pack, which may lead to a failure of the pack to
provide service normally. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.5.0.27 |
cpDegradeClearA previously active Circuit Pack Degrade condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.5.0.28 |
oaCondNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.2.6 |
oaCaseTempCondA case temperature high threshold is exceeded. A warning is
raised to indicate that the amplifier is nearing its shutdown
threshold. The circuit pack in the associated slot has
exceeded its case temperature high threshold. If the case
temperature continues to rise to its shutdown threshold, the
circuit pack automatically shuts down. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.6.0.1 |
oaCaseTempClearA previously active optical amplifier case temperature
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.6.0.2 |
oaCaseTempShutdownCondA case temperature high threshold shutdown has occurred. The
optical amplifier is shutdown and taken out-of-service by the
system. The pump lasers are turned off and there is no
amplification. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.6.0.3 |
oaCaseTempShutdownClearA previously active optical amplifier case temperature
shutdown condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.6.0.4 |
oaLaserMinTempShutdownCondA pump laser temperature low threshold shutdown has occurred.
The optical amplifier is shutdown and taken out-of-service by
the system. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.6.0.5 |
oaLaserMinTempShutdownClearA previously active optical amplifier minimum temperature
shutdown condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.6.0.6 |
oaLaserMaxTempShutdownCondA pump laser temperature high threshold shutdown has occurred.
The optical amplifier is shutdown and taken out-of-service by
the system. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.6.0.7 |
oaLaserMaxTempShutdownClearA previously active optical amplifier maximum temperature
shutdown condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.6.0.8 |
oaOpticalPwrReceivedMinCondThe optical power received (OPR) low threshold is exceeded.
The input signal to an optical amplifier has reached the
optical power received low threshold. If the input signal
drops to below the input sensitivity level, the circuit pack
will degrade in performance. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.6.0.9 |
oaOpticalPwrReceivedMinClearA previously active optical amplifier minimum power received
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.6.0.10 |
oaOpticalPwrReceivedMaxCondThe optical power received (OPR) high threshold is crossed.
The input signal to an optical amplifier has reached the
optical power received high threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.6.0.11 |
oaOpticalPwrReceivedMaxClearA previously active optical amplifier maximum power received
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.6.0.12 |
oaSSIOpticalPwrReceivedMaxCondA second stage input optical power received (OPR) high
threshold crossing has occurred. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.6.0.13 |
oaSSIOpticalPwrReceivedMaxClearA previously active optical amplifier second stage input
maximum power received condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.6.0.14 |
oaBackReflectionSafetyCondThe Optical Back Reflection - High Threshold Safety Override
alarm indicates someone has activated the optical power
received optical back reflection high threshold safety
override (OPR-OBR-HTSO) command to override the automatic
power reduction (APR) feature of the amplifier lasers. This
command overrides the APR feature of the amplifier for 20 to
600 seconds. When the timer expires, the alarm clears. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.6.0.17 |
oaBackReflectionSafetyClearA previously active optical amplifier back reflection safety
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.6.0.18 |
oaOpticalPwrTransmittedMinCondThe optical power transmitted (OPT) low threshold is crossed. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.6.0.19 |
oaOpticalPwrTransmittedMinClearA previously active optical amplifier minimum transmitted
power condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.6.0.20 |
oaOpticalPwrTransmittedMaxCondThe optical power transmitted (OPT) high threshold has been
exceeded on the amplifier. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.6.0.21 |
oaOpticalPwrTransmittedMaxClearA previously active optical amplifier maximum transmitted
power condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.6.0.22 |
oaMSInsertionLossCondA mid-stage insertion loss high threshold is exceeded for a
mid-stage amplifier. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.6.0.23 |
oaMSInsertionLossClearA previously active optical amplifier midstage insertion loss
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.6.0.24 |
oaAmplifierConditioningCondThere is an amplifier conditioning problem. When an amplifier
is initially plugged in, thermo-electric coolers (TEC) work to
control the pump laser temperature to between 16 degrees and
34 degrees Celsius. Until the pump laser temperature is within
range, the amplifier conditioning problem is present. If the
amplifier conditioning problem persists for more than 30
minutes, the condition is cleared and either a laser
temperature low threshold or a laser temperature high
threshold alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.6.0.25 |
oaAmplifierConditioningClearA previously active optical amplifier conditioning condition
has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.6.0.26 |
oaDspCommCondThis alarm indicates that communication has failed between the
DSP and the processor handling backplane communications on an
optical amplifier circuit pack. Normal OAM&P operations to the
circuit pack, like provisioning and performance monitoring, is
affected when this alarm is active. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.6.0.27 |
oaDspCommClearA previously active optical amplifier DSP communications
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.6.0.28 |
oaBackReflectionSafetyOverrideCondThe Optical Back Reflection - High Threshold Safety Override
alarm indicates someone has activated the high threshold
safety override command to override the automatic power
reduction (APR) feature of the amplifier lasers. This command
overrides the APR feature of the amplifier for 20 to 600
seconds. When the timer expires, the alarm clears. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.6.0.41 |
oaBackReflectionSafetyOverrideClearA previously active back reflection safety override condition
has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.6.0.42 |
oaBackReflectionHighThresholdCondThe Optical Amplifier Back Reflection High Threshold alarm
indicates that the measured optical back reflection power has
exceeded the high threshold. This serves as a warning that
optical back reflection is operating at an elevated level, and
that continued increases in the optical back reflection level
may result in an automatic laser safety shutdown. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.6.0.43 |
oaBackReflectionHighThresholdClearA previously active back reflection high threshold condition
has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.6.0.44 |
dataCommsCondNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.2.7 |
oscLossOfSignalCondThis condition indicates that an SFP transceiver has
experienced an input power drop that is below the manufacturer
s preset threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.7.0.1 |
oscLossOfSignalClearA previously active optical supervisory channel loss of signal
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.7.0.2 |
oscSfpMissingCondAn SFP transceiver is missing from its associated port in an
MSCP circuit pack. To clear this alarm, insert an appropriate
transceiver in the associated port of the MSCP circuit pack. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.7.0.3 |
oscSfpMissingClearA previously active optical supervisory channel SFP missing
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.7.0.4 |
pluggableInvCondNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.2.8 |
pluggableInvUnknownCondThe SFP or XFP transceiver type is unknown to the system. This
alarm occurs because the transceiver is not supported by the
current software. To clear this alarm, insert a readable SFP
or XFP transceiver in the associated port of the circuit
pack. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.8.0.1 |
pluggableInvUnknownClearA previously active Pluggable Inventory Unknown condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.8.0.2 |
pluggableInvCommCondThis alarm indicates that communication between a circuit pack
and an inserted small form factor pluggable (SFP) transceiver
is not reliable. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.8.0.3 |
pluggableInvCommClearA previously active Pluggable Inventory communications
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.8.0.4 |
pluggableInvFailCondThere is an SFP or XFP transceiver failure. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.8.0.5 |
pluggableInvFailClearA previously active Pluggable Inventory fail condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.8.0.6 |
pluggableInvMismatchCondThere is an SFP mismatch condition active. There is a mismatch
between the SFP transceiver provisioned for a port of a
circuit pack and the physical SFP transceiver that is inserted
in the port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.8.0.7 |
pluggableInvMismatchClearA previously active Pluggable Inventory mismatch condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.8.0.8 |
pluggableInvMissingCondThere is an SFP or XFP missing from the indicated port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.8.0.9 |
pluggableInvMissingClearA previously active Pluggable Inventory missing condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.8.0.10 |
pluggableInvUnsupportedCondThe electrical SFP transceiver type is NOT supported in the given
port. This alarm occurs when an electrical SFP is plugged into a
port that does not support GE. To clear this alarm, remove the
electrical SFP. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.8.0.11 |
pluggableInvUnsupportedClearA previously active Pluggable unsupported condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.8.0.12 |
xcvrCondNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.2.9 |
xcvrMissingCondAn SFP or XFP transceiver is missing from its associated port
in a circuit pack. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.1 |
xcvrMissingClearA previously active transceiver port missing condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.2 |
xcvrMismatchCondThere is a mismatch between the SFP or XFP transceiver
provisioned for a port of a circuit pack and the physical SFP
or XFP transceiver that is inserted in the port. The
provisioned SFP or XFP transceiver must match the transceiver
in the port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.3 |
xcvrMismatchClearA previously active transceiver port type mismatch condition
has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.4 |
xcvrRFICondRemote Fault Indication: The source port to which the
specified destination transceiver port is cross-connected has
a service-affecting fault active against it. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.5 |
xcvrRFIClearA previously active transceiver RFI condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.6 |
xcvrLossOfSignalCondThis alarm indicates that an SFP transceiver has experienced
an input power drop that is below the preset minimum
threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.7 |
xcvrLossOfSignalClearA previously active transceiver port Loss Of Signal condition
has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.8 |
xcvrLossOfLockCondThis alarm indicates that a transceiver port is unable to lock
on the incoming bit stream. This is a result of either: the
provisioned protocol does not match the incoming signal, or
the incoming signal is excessively degraded. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.9 |
xcvrLossOfLockClearA previously active transceiver port Loss Of Lock condition
has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.10 |
xcvrOpticalPwrReceivedMinCondThe optical power received (OPR) low threshold is not met. The
input signal to a transceiver has reached the optical power
received low threshold. If the input signal drops to below the
input sensitivity level, the transceiver degrades in
performance. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.11 |
xcvrOpticalPwrReceivedMinClearA previously active transceiver port minimum power received
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.12 |
xcvrOpticalPwrReceivedMaxCondThe optical power received (OPR) high threshold is exceeded.
The input signal to a transceiver has reached the optical
power received high threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.13 |
xcvrOpticalPwrReceivedMaxClearA previously active transceiver port maximum power received
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.14 |
xcvrOpticalPwrTransmittedMinCondThe optical power transmitted (OPT) is below the low threshold
for the transceiver. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.15 |
xcvrOpticalPwrTransmittedMinClearA previously active transceiver port minimum power transmitted
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.16 |
xcvrOpticalPwrTransmittedMaxCondThe optical power transmitted (OPT) high threshold for a
transceiver is exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.17 |
xcvrOpticalPwrTransmittedMaxClearA previously active transceiver port maximum power transmitted
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.18 |
xcvrLossOfFrameCondA transceiver reports a SONET or SDH loss of frame for a
transceiver that is provisioned to receive a SONET or SDH
protocol. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.19 |
xcvrLossOfFrameClearA previously active loss of frame condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.20 |
xcvrLossOfSyncCondIndicates that a loss of synchronization condition has been
detected by the transceiver port on the incoming gigabit
ethernet or 10GELAN protocol. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.21 |
xcvrLossOfSyncClearA previously active loss of synchronization condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.22 |
xcvrLoopbackCondIndicates that the transceiver has been provisioned to enter
loopback mode. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.27 |
xcvrLoopbackClearA previously active loopback condition on the transceiver has
been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.28 |
xcvrForcedSwitchToProtectionCondThe active transceiver of a protected transceiver pair has
been forced to switch to the Protection transceiver. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.29 |
xcvrForcedSwitchToProtectionClearA previously active Forced Switch To Protection condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.30 |
xcvrForcedSwitchToWorkingCondThe active transceiver of a protected transceiver pair has
been forced to switch to the Working transceiver. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.31 |
xcvrForcedSwitchToWorkingClearA previously active Forced Switch To Working condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.32 |
xcvrLockoutProtectionCondThe Protection transceiver of a protected transceiver pair has
been locked out. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.33 |
xcvrLockoutProtectionClearA previously active Lockout Protection condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.34 |
xcvrLockoutWorkingCondThe Working transceiver of a protected transceiver pair has
been locked out. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.35 |
xcvrLockoutWorkingClearA previously active Lockout Working condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.36 |
xcvrTempMaxCondIndicates that the temperature of the physical transceiver has
risen above the maximum threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.37 |
xcvrTempMaxClearA previously active Temperature Exceeded Maximum condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.38 |
xcvrWavelengthNotAchievableCondIndicates that the transceiver is not currently able to tune
to the set wavelength. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.39 |
xcvrWavelengthNotAchievableClearA previously active Wavelength Not Achievable condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.40 |
xcvrAlarmIndicationSignalCondAn Alarm Indication Signal indication is active on the
transceiver port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.41 |
xcvrAlarmIndicationSignalClearA previously active Alarm Indication Signal condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.42 |
xcvrTraceMismatchCondThis condition indicates that the received trace label on the
transciever port does not match the expected trace label. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.43 |
xcvrTraceMismatchClearA previously active Trace Mismatch condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.44 |
xcvrRemoteFaultCondA remote fault indication is active on the traceiver port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.45 |
xcvrRemoteFaultClearA previously raised remote fault indication has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.46 |
xcvrSignalDegradeCondThe Signal Degrade BER threshold has been crossed on the
transiever port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.47 |
xcvrSignalDegradeClearA previously active Signal Degrade condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.48 |
xcvrOTNPayloadMismatchCondAn OTN payload mismatch is active on the transceiver port
facility. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.49 |
xcvrOTNPayloadMismatchClearA previously active OTN payload mismatch condition on the
transceiver port facility has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.50 |
xcvrLFCondLocal Failure: Raised when a port detects and incoming local
failure indication is received. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.51 |
xcvrLFClearA previously active transceiver LF condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.52 |
xcvrOpenConnectionIndicatorCondAn Open Connection Indicator is active on the
transceiver port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.53 |
xcvrOpenConnectionIndicatorClearA previously active Open Connection Indicator condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.54 |
xcvrReceivedLockoutCondA Received Lockout indication is active on the
transceiver port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.55 |
xcvrReceivedLockoutClearA previously active Received Lockout condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.56 |
xcvrBackwardDefectIndicatorCondA Backward Defect Indicator is active on the
transceiver port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.57 |
xcvrBackwardDefectIndicatorClearA previously active Backward Defect Indicator condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.9.0.58 |
adminCondNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.2.10 |
tl1UserLockoutCondA user is locked out of the system. After three incorrect
attempts to login, a user is blocked from attempting to login
again for 60 seconds. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.10.0.1 |
tl1UserLockoutClearA previously active TL1 User Lockout condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.10.0.2 |
tl1IpLockoutCondAfter three incorrect attempts to login from the same IP
address, the IP address from which the three attempts are made
is blocked for 60 seconds. When this condition is present in
the actCondTable, the actCondTableEntryIdx will be set to the
networkElement OID and the actCondInstanceIdx will be set to
0. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.10.0.3 |
tl1IpLockoutClearA previously active TL1 IP lockout condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.10.0.4 |
amdCondNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.2.11 |
amdLossOfSignalCondThis condition indicates that an active mux/demux that has
experienced an input power drop that is below the preset
threshold. This can be against either a channel or the
composite line port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.11.0.1 |
amdLossOfSignalClearA previously raised active multiplexer-demultiplexer loss of
signal condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.11.0.2 |
amdOpticalPwrReceivedMinCondIndicates that the input power for the active
multiplexer-demultiplexer facility has fallen below the
minimum threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.11.0.3 |
amdOpticalPwrReceivedMinClearA previously raised active multiplexer-demultiplexer minimum
power received condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.11.0.4 |
amdOpticalPwrReceivedMaxCondIndicates that the input power for the active
multiplexer-demultiplexer facility has risen above the maximum
threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.11.0.5 |
amdOpticalPwrReceivedMaxClearA previously raised active multiplexer-demultiplexer maximum
power received condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.11.0.6 |
amdTPLNACondA channel target power level not achieved (TPLNA) condition is
triggered when the output power for a channel of a 32-Channel
DWDM Active Mux/Demux (D32AMD) module is above or below the
target power transmitted level for that channel. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.11.0.7 |
amdTPLNAClearA previously raised active target power level not achieved
condition has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.11.0.8 |
amdTALNACondThe target attenuation level not achieved (TALNA) condition is
triggered when the attenuation for a 32-Channel DWDM Active
Mux/Demux (D32AMD) is outside the preset attenuation levels
for a composite line. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.11.0.9 |
amdTALNAClearA previously raised active target attenuation level not
achieved condition has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.11.0.10 |
ocnCondNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.2.12 |
ocnLossOfSignalCondThis notification indicates that there is no input signal
detected on the OC-N port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.1 |
ocnLossOfSignalClearThis notification indicates that a previously active OC-N Loss
of Signal condition has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.2 |
ocnXcvrMismatchCondThere is a mismatch between the SFP or XFP transceiver
provisioned for the OC-N facility port and the physical
transceiver that is inserted in the port. The SFP or XFP
transceiver in the port must match the attributes provisioned
for the OC-N facility. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.3 |
ocnXcvrMismatchClearA previously active OC-N Mismatch condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.4 |
ocnOpticalPwrReceivedMinCondIndicates that the input power for the OC-N facility has
fallen below the minimum threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.5 |
ocnOpticalPwrReceivedMinClearA previously active OC-N minimum power recieved condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.6 |
ocnOpticalPwrReceivedMaxCondIndicates that the input power for the OC-N facility has risen
above the maximum threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.7 |
ocnOpticalPwrReceivedMaxClearA previously active OC-N maximum power recieved condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.8 |
ocnOpticalPwrTransmittedMinCondIndicates that the output power for the OC-N facility has
fallen below the minimum threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.9 |
ocnOpticalPwrTransmittedMinClearA previously active OC-N minimum power transmitted condition
has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.10 |
ocnOpticalPwrTransmittedMaxCondIndicates that the output power for the OC-N facility has
risen above the maximum threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.11 |
ocnOpticalPwrTransmittedMaxClearA previously active OC-N maximum power transmitted condition
has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.12 |
ocnLossOfFrameCondAn OC-N Loss of Frame condition is active on the port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.13 |
ocnLossOfFrameClearA previously active OC-N Loss of Frame condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.14 |
ocnSignalDegradeCondA signal degrade condition on the OC-N facility is active.
This indicates that the detected bit error rate exceeds the
degrade threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.15 |
ocnSignalDegradeClearA previously active OC-N Signal Degrade condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.16 |
ocnAlarmIndicationSignalCondAn OC-N Line-level Alarm Indication Signal indication is
active on facility. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.17 |
ocnAlarmIndicationSignalClearA previously active OC-N Alarm Indication Signal condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.18 |
ocnLoopbackCondIndicates that the OC-N facility has been provisioned to enter
loopback mode. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.19 |
ocnLoopbackClearA previously active loopback condition on the OC-N facility
has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.20 |
ocnLossOfPrimaryTimingReferenceCondIndicates that the primary timing reference signal for the
identified OC-N facility is missing or faulty and cannot be
locked on. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.21 |
ocnLossOfPrimaryTimingReferenceClearA previously active OC-N Loss of Primary Timing Reference
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.22 |
ocnLossOfSecondaryTimingReferenceCondIndicates that the secondary timing reference signal for the
identified OC-N facility is missing or faulty and cannot be
locked on. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.23 |
ocnLossOfSecondaryTimingReferenceClearA previously active OC-N Loss of Secondary Timing Reference
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.24 |
ocnOTNPayloadMismatchCondAn OTN payload mismatch is active on the facility. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.25 |
ocnOTNPayloadMismatchClearA previously active OTN payload mismatch condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.26 |
ocnForcedSwitchToProtectionCondThe active line of a protected line pair has
been forced to switch to the Protection line. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.27 |
ocnForcedSwitchToProtectionClearA previously active Forced Switch To Protection condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.28 |
ocnForcedSwitchToWorkingCondThe active line of a protected line pair has
been forced to switch to the Working line. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.29 |
ocnForcedSwitchToWorkingClearA previously active Forced Switch To Working condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.30 |
ocnLockoutProtectionCondThe Protection line of a protected line pair has
been locked out. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.31 |
ocnLockoutProtectionClearA previously active Lockout Protection condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.32 |
ocnLockoutWorkingCondThe Working line of a protected line pair has
been locked out. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.33 |
ocnLockoutWorkingClearA previously active Lockout Working condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.34 |
ocnWavelengthNotAchievableCondThe tunable pluggable cannot be tuned to the provisioned wavelength. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.35 |
ocnWavelengthNotAchievableClearA previously active Wavelength Not Achievable condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.12.0.36 |
stsnCondNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.2.13 |
stsnAlarmIndicationSignalCondA Path-level Alarm Indication Signal indication is active on
the STS-N channel. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.13.0.1 |
stsnAlarmIndicationSignalClearA previously active STS-N Alarm Indication Signal condition
has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.13.0.2 |
stsnLossOfPointerCondA Loss of Pointer condition is active on the STS-N channel. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.13.0.3 |
stsnLossOfPointerClearA previously raised STS-N Loss of Pointer condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.13.0.4 |
stsnUnequippedCondAn Unequipped indication has been detected for the STS-N
channel. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.13.0.5 |
stsnUnequippedClearA previously raised STS-N Unequipped condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.13.0.6 |
stsnSignalDegradeCondA signal degrade condition on the STS-N channel is active.
This indicates that the detected bit error rate exceeds the
degrade threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.13.0.7 |
stsnSignalDegradeClearA previously raised STS-N signal degrade condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.13.0.8 |
stsnForcedSwitchToProtectionCondThe active STS-N channel of a protected STS-N channel pair has
been forced to switch to the Protection transceiver. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.13.0.9 |
stsnForcedSwitchToProtectionClearA previously raised STS-N Forced Switch To Protection
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.13.0.10 |
stsnForcedSwitchToWorkingCondThe active STS-N channel of a protected STS-N channel pair has
been forced to switch to the Working transceiver. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.13.0.11 |
stsnForcedSwitchToWorkingClearA previously raised STS-N Forced Switch To Working condition
has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.13.0.12 |
stsnLockoutProtectionCondThe Protection STS-N channel of a protected STS-N channel pair
has been locked out. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.13.0.13 |
stsnLockoutProtectionClearA previously raised STS-N Lockout Protection condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.13.0.14 |
stsnLockoutWorkingCondThe Working STS-N channel of a protected STS-N channel pair
has been locked out. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.13.0.15 |
stsnLockoutWorkingClearA previously raised STS-N Lockout Working condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.13.0.16 |
stsnConcatMismatchCondA connection provisioning does not match has been detected for
the STS-N channel. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.13.0.17 |
stsnConcatMismatchClearA previously raised STS-N Concat Mismatch condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.13.0.18 |
stmnCondNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.2.14 |
stmnLossOfSignalCondThis notification indicates that there is no input signal
detected on the STM-N port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.1 |
stmnLossOfSignalClearThis notification indicates that a previously active STM-N
Loss of Signal condition has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.2 |
stmnXcvrMismatchCondThere is a mismatch between the SFP or XFP transceiver
provisioned for the STM-N facility port and the physical
transceiver that is inserted in the port. The SFP or XFP
transceiver in the port must match the attributes provisioned
for the STM-N facility. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.3 |
stmnXcvrMismatchClearA previously active STM-N Mismatch condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.4 |
stmnOpticalPwrReceivedMinCondIndicates that the input power for the STM-N facility has
fallen below the minimum threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.5 |
stmnOpticalPwrReceivedMinClearA previously active STM-N minimum power recieved condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.6 |
stmnOpticalPwrReceivedMaxCondIndicates that the input power for the STM-N facility has
risen above the maximum threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.7 |
stmnOpticalPwrReceivedMaxClearA previously active STM-N maximum power recieved condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.8 |
stmnOpticalPwrTransmittedMinCondIndicates that the output power for the STM-N facility has
fallen below the minimum threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.9 |
stmnOpticalPwrTransmittedMinClearA previously active STM-N minimum power transmitted condition
has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.10 |
stmnOpticalPwrTransmittedMaxCondIndicates that the output power for the STM-N facility has
risen above the maximum threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.11 |
stmnOpticalPwrTransmittedMaxClearA previously active STM-N maximum power transmitted condition
has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.12 |
stmnLossOfFrameCondAn STM-N Loss of Frame condition is active on the port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.13 |
stmnLossOfFrameClearA previously active STM-N Loss of Frame condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.14 |
stmnSignalDegradeCondA signal degrade condition on the STM-N facility is active.
This indicates that the detected bit error rate exceeds the
degrade threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.15 |
stmnSignalDegradeClearA previously active STM-N Signal Degrade condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.16 |
stmnAlarmIndicationSignalCondAn STM-N Line-level Alarm Indication Signal indication is
active on facility. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.17 |
stmnAlarmIndicationSignalClearA previously active STM-N Alarm Indication Signal condition
has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.18 |
stmnLoopbackCondIndicates that the STM-N facility has been provisioned to
enter loopback mode. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.19 |
stmnLoopbackClearA previously active loopback condition on the STM-N facility
has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.20 |
stmnLossOfPrimaryTimingReferenceCondIndicates that the primary timing reference signal for the
identified STM-N facility is missing or faulty and cannot be
locked on. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.21 |
stmnLossOfPrimaryTimingReferenceClearA previously active STM-N Loss of Primary Timing Reference
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.22 |
stmnLossOfSecondaryTimingReferenceCondIndicates that the secondary timing reference signal for the
identified STM-N facility is missing or faulty and cannot be
locked on. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.23 |
stmnLossOfSecondaryTimingReferenceClearA previously active STM-N Loss of Secondary Timing Reference
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.24 |
stmnOTNPayloadMismatchCondAn OTN payload mismatch is active on the facility. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.25 |
stmnOTNPayloadMismatchClearA previously active OTN payload mismatch condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.26 |
stmnForcedSwitchToProtectionCondThe active line of a protected line pair has
been forced to switch to the Protection line. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.27 |
stmnForcedSwitchToProtectionClearA previously active Forced Switch To Protection condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.28 |
stmnForcedSwitchToWorkingCondThe active line of a protected line pair has
been forced to switch to the Working line. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.29 |
stmnForcedSwitchToWorkingClearA previously active Forced Switch To Working condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.30 |
stmnLockoutProtectionCondThe Protection line of a protected line pair has
been locked out. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.31 |
stmnLockoutProtectionClearA previously active Lockout Protection condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.32 |
stmnLockoutWorkingCondThe Working line of a protected line pair has
been locked out. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.33 |
stmnLockoutWorkingClearA previously active Lockout Working condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.34 |
stmnWavelengthNotAchievableCondA previously active Wavelength Not Achievable condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.35 |
stmnWavelengthNotAchievableClearA previously active Lockout Working condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.14.0.36 |
vcnCondNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.2.15 |
vcnAlarmIndicationSignalCondA Path-level Alarm Indication Signal indication is active on
the VC-N channel. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.15.0.1 |
vcnAlarmIndicationSignalClearA previously active VC-N Alarm Indication Signal condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.15.0.2 |
vcnLossOfPointerCondA Loss of Pointer condition is active on the VC-N channel. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.15.0.3 |
vcnLossOfPointerClearA previously raised VC-N Loss of Pointer condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.15.0.4 |
vcnUnequippedCondAn Unequipped indication has been detected for the VC-N
channel. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.15.0.5 |
vcnUnequippedClearA previously raised VC-N Unequipped condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.15.0.6 |
vcnSignalDegradeCondA signal degrade condition on the VC-N channel is active. This
indicates that the detected bit error rate exceeds the degrade
threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.15.0.7 |
vcnSignalDegradeClearA previously raised VC-N signal degrade condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.15.0.8 |
vcnForcedSwitchToProtectionCondThe active VC-N channel of a protected VC-N channel pair has
been forced to switch to the Protection transceiver. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.15.0.9 |
vcnForcedSwitchToProtectionClearA previously raised VC-N Forced Switch To Protection condition
has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.15.0.10 |
vcnForcedSwitchToWorkingCondThe active VC-N channel of a protected VC-N channel pair has
been forced to switch to the Working transceiver. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.15.0.11 |
vcnForcedSwitchToWorkingClearA previously raised VC-N Forced Switch To Working condition
has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.15.0.12 |
vcnLockoutProtectionCondThe Protection VC-N channel of a protected VC-N channel pair
has been locked out. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.15.0.13 |
vcnLockoutProtectionClearA previously raised VC-N Lockout Protection condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.15.0.14 |
vcnLockoutWorkingCondThe Working VC-N channel of a protected VC-N channel pair has
been locked out. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.15.0.15 |
vcnLockoutWorkingClearA previously raised VC-N Lockout Working condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.15.0.16 |
vcnConcatMismatchCondA connection provisioning does not match has been detected for
the VC-N channel. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.15.0.17 |
vcnConcatMismatchClearA previously raised VC-N Concat Mismatch condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.15.0.18 |
geCondNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.2.16 |
geLossOfSignalCondThis notification indicates that there is no input signal
detected on the Gigabit Ethernet port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.16.0.1 |
geLossOfSignalClearThis notification indicates that a previously active GE Loss
of Signal condition has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.16.0.2 |
geXcvrMismatchCondThere is a mismatch between the SFP or XFP transceiver
provisioned for the Gigabit Ethernet facility port and the
physical transceiver that is inserted in the port. The SFP or
XFP transceiver in the port must match the attributes
provisioned for the GE facility. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.16.0.3 |
geXcvrMismatchClearA previously active GE Mistmatch condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.16.0.4 |
geOpticalPwrReceivedMinCondIndicates that the input power for the Gigabit Ethernet
facility has fallen below the minimum threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.16.0.5 |
geOpticalPwrReceivedMinClearA previously active GE minimum power recieved condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.16.0.6 |
geOpticalPwrReceivedMaxCondIndicates that the input power for the Gigabity Ethernet
facility has risen above the maximum threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.16.0.7 |
geOpticalPwrReceivedMaxClearA previously active GE maximum power recieved condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.16.0.8 |
geOpticalPwrTransmittedMinCondIndicates that the output power for the Gigabit Ethernet
facility has fallen below the minimum threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.16.0.9 |
geOpticalPwrTransmittedMinClearA previously active GE minimum power transmitted condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.16.0.10 |
geOpticalPwrTransmittedMaxCondIndicates that the output power for the Gigabit Ethernet
facility has risen above the maximum threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.16.0.11 |
geOpticalPwrTransmittedMaxClearA previously active GE maximum power transmitted condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.16.0.12 |
geLossOfSyncCondA Gigabit Ethernet Loss of Synchronization condition is active
on the port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.16.0.13 |
geLossOfSyncClearA previously active Gigabit Ethernet Loss of Synchronization
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.16.0.14 |
geRemotePathFailureCondA Gigabit Ethernet Remote Path Failure condition is active on
the port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.16.0.15 |
geRemotePathFailureClearA previously active GE Remote Path Failure condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.16.0.16 |
geLossOfMultiframeCondA Loss of Multiframe condition is active against the VCG that
is mapped to the identified Gigabit Ethernet port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.16.0.17 |
geLossOfMultiframeClearA previously raised GE Loss of Multiframe condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.16.0.18 |
geLossOfSequenceCondA Loss of Sequence condition is active against the VCG that is
mapped to the identified Gigabit Ethernet port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.16.0.19 |
geLossOfSequenceClearA previously active GE Loss of Sequence condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.16.0.20 |
geLossOfAlignmentCondA Loss of Alignment condition is active against the VCG that
is mapped to the identified Gigabit Ethernet port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.16.0.21 |
geLossOfAlignmentClearA previously active GE Loss of Alignment condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.16.0.22 |
geLoopbackCondIndicates that the Gigabit Ethernet facility has been
provisioned to enter loopback mode. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.16.0.23 |
geLoopbackClearA previously active GE Loopback condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.16.0.24 |
geBandwidthMismatchCondA GE bandwidth mismatch condition is active on the port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.16.0.25 |
geBandwidthMismatchClearA previously active GE bandwidth mismatch condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.16.0.26 |
gePayloadMismatchCondA GE payload mismatch condition is active on the port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.16.0.27 |
gePayloadMismatchClearA previously active GE payload mismatch condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.16.0.28 |
fcCondNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.2.17 |
fcLossOfSignalCondThis notification indicates that there is no input signal
detected on the Fiber Channel port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.17.0.1 |
fcLossOfSignalClearThis notification indicates that a previously active FC Loss
of Signal condition has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.17.0.2 |
fcXcvrMismatchCondThere is a mismatch between the SFP or XFP transceiver
provisioned for the Fiber Channel facility port and the
physical transceiver that is inserted in the port. The SFP or
XFP transceiver in the port must match the attributes
provisioned for the FC facility. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.17.0.3 |
fcXcvrMismatchClearA previously active FC XCVR Mistmatch condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.17.0.4 |
fcOpticalPwrReceivedMinCondIndicates that the input power for the Fiber Channel facility
has fallen below the minimum threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.17.0.5 |
fcOpticalPwrReceivedMinClearA previously active FC minimum power recieved condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.17.0.6 |
fcOpticalPwrReceivedMaxCondIndicates that the input power for the Fiber Channel facility
has risen above the maximum threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.17.0.7 |
fcOpticalPwrReceivedMaxClearA previously active FC maximum power recieved condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.17.0.8 |
fcOpticalPwrTransmittedMinCondIndicates that the output power for the Fiber Channel facility
has fallen below the minimum threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.17.0.9 |
fcOpticalPwrTransmittedMinClearA previously active FC minimum power transmitted condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.17.0.10 |
fcOpticalPwrTransmittedMaxCondIndicates that the output power for the Fiber Channel facility
has risen above the maximum threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.17.0.11 |
fcOpticalPwrTransmittedMaxClearA previously active FC maximum power transmitted condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.17.0.12 |
fcLossOfSyncCondA Fiber Channel Loss of Synchronization condition is active on
the port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.17.0.13 |
fcLossOfSyncClearA previously active Fiber Channel Loss of Synchronization
condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.17.0.14 |
fcRemotePathFailureCondA Fiber Channel Remote Path Failure condition is active on the
port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.17.0.15 |
fcRemotePathFailureClearA previously active FC Remote Path Failure condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.17.0.16 |
fcLossOfMultiframeCondA Loss of Multiframe condition is active against the VCG that
is mapped to the identified Fiber Channel port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.17.0.17 |
fcLossOfMultiframeClearA previously raised FC Loss of Multiframe condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.17.0.18 |
fcLossOfSequenceCondA Loss of Sequence condition is active against the VCG that is
mapped to the identified Fiber Channel port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.17.0.19 |
fcLossOfSequenceClearA previously active FC Loss of Sequence condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.17.0.20 |
fcLossOfAlignmentCondA Loss of Alignment condition is active against the VCG that
is mapped to the identified Fiber Channel port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.17.0.21 |
fcLossOfAlignmentClearA previously active FC Loss of Alignment condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.17.0.22 |
fcLoopbackCondIndicates that the Fiber Channel facility has been provisioned
to enter loopback mode. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.17.0.23 |
fcLoopbackClearA previously active FC Loopback condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.17.0.24 |
fcBandwidthMismatchCondA Fiber Channel bandwidth mismatch condition is active on the
port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.17.0.25 |
fcBandwidthMismatchClearA previously active Fiber Channel bandwidth mismatch condition
has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.17.0.26 |
fcPayloadMismatchCondA Fiber Channel payload mismatch condition is active on the
port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.17.0.27 |
fcPayloadMismatchClearA previously active Fiber Channel payload mismatch condition
has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.17.0.28 |
ethPortCondNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.2.20 |
olsSFPMissingCond NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.1 |
olsSFPMissingClear NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.2 |
olsSFPMismatchCond NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.3 |
olsSFPMismatchClear NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.4 |
olsInputLOSCond NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.5 |
olsInputLOSClear NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.6 |
olsOpticalPwrReceivedMinCond NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.7 |
olsOpticalPwrReceivedMinClear NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.8 |
olsOpticalPwrReceivedMaxCond NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.9 |
olsOpticalPwrReceivedMaxClear NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.10 |
olsOpticalPwrTransmittedMinCond NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.11 |
olsOpticalPwrTransmittedMinClear NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.12 |
olsOpticalPwrTransmittedMaxCond NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.13 |
olsOpticalPwrTransmittedMaxClear NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.14 |
olsTemperatureMaxCond NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.15 |
olsTemperatureMaxClear NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.16 |
olsLoopbackCond NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.17 |
olsLoopbackClear NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.18 |
olsLossOfSyncCond NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.19 |
olsLossOfSyncClear NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.20 |
olsLossOfFrameCond NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.21 |
olsLossOfFrameClear NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.22 |
olsAlarmIndicationSignalCond NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.23 |
olsAlarmIndicationSignalClear NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.24 |
olsBackwardDefectIndicatorCond NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.25 |
olsBackwardDefectIndicatorClear NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.26 |
olsSignalDegradeCond NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.27 |
olsSignalDegradeClear NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.28 |
olsOTNPayloadMismatchCond NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.29 |
olsOTNPayloadMismatchClear NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.30 |
olsOTUTrailTraceMismatchCond NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.31 |
olsOTUTrailTraceMismatchClear NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.32 |
olsRemoteFaultCondA remote fault indication is active on the ethernet interface. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.33 |
olsRemoteFaultClearA previously raised remote fault indication has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.34 |
olsLocalFaultCondA local fault indication is active on the ethernet interface. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.35 |
olsLocalFaultClearA previously raised local fault indication has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.36 |
olsWavelengthNotAchievableCond NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.37 |
olsWavelengthNotAchievableClear NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.20.0.38 |
pvxL2PortCondNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.2.21 |
olsLinkDownCondPVX L2 port link down. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.21.0.1 |
olsLinkDownClearPVX L2 port link down has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.21.0.2 |
mstpCondNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.2.22 |
lagCondNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.2.23 |
odunCondNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.2.24 |
odunPayloadMismatchCondA payload mismatch is active on the ODU-N facility. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.24.0.1 |
odunPayloadMismatchClearA previously active ODU-N facility payload mismatch condition
has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.24.0.2 |
odunOpenConnectionIndicatorCondAn OCI is active on the ODU-N facility. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.24.0.3 |
odunOpenConnectionIndicatorClearA previously active ODU-N OCI condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.24.0.4 |
briCondNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.2.25 |
briLossOfSignalCondThis notification indicates that there is no input signal
detected on the BRI port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.25.0.1 |
briLossOfSignalClearThis notification indicates that a previously active BRI Loss
of Signal condition has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.25.0.2 |
briXcvrMismatchCondThere is a mismatch between the SFP or XFP transceiver
provisioned for the BRI facility port and the
physical transceiver that is inserted in the port. The SFP or
XFP transceiver in the port must match the attributes
provisioned for the BRI facility. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.25.0.3 |
briXcvrMismatchClearA previously active BRI XCVR Mistmatch condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.25.0.4 |
briOpticalPwrReceivedMinCondIndicates that the input power for the BRI facility
has fallen below the minimum threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.25.0.5 |
briOpticalPwrReceivedMinClearA previously active BRI minimum power recieved condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.25.0.6 |
briOpticalPwrReceivedMaxCondIndicates that the input power for the BRI facility
has risen above the maximum threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.25.0.7 |
briOpticalPwrReceivedMaxClearA previously active BRI maximum power recieved condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.25.0.8 |
briOpticalPwrTransmittedMinCondIndicates that the output power for the BRI facility
has fallen below the minimum threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.25.0.9 |
briOpticalPwrTransmittedMinClearA previously active BRI minimum power transmitted condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.25.0.10 |
briOpticalPwrTransmittedMaxCondIndicates that the output power for the BRI facility
has risen above the maximum threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.25.0.11 |
briOpticalPwrTransmittedMaxClearA previously active BRI maximum power transmitted condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.25.0.12 |
briLossOfMultiframeCondA Loss of Multiframe condition is active against the VCG that
is mapped to the identified BRI port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.25.0.13 |
briLossOfMultiframeClearA previously raised BRI Loss of Multiframe condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.25.0.14 |
briLossOfSequenceCondA Loss of Sequence condition is active against the VCG that is
mapped to the identified BRI port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.25.0.15 |
briLossOfSequenceClearA previously active BRI Loss of Sequence condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.25.0.16 |
briLossOfAlignmentCondA Loss of Alignment condition is active against the VCG that
is mapped to the identified BRI port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.25.0.17 |
briLossOfAlignmentClearA previously active BRI Loss of Alignment condition has
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.25.0.18 |
briLoopbackCondIndicates that the BRI facility has been provisioned
to enter loopback mode. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.25.0.19 |
briLoopbackClearA previously active BRI Loopback condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.25.0.20 |
briBandwidthMismatchCondA BRI bandwidth mismatch condition is active on the
port. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.25.0.21 |
briBandwidthMismatchClearA previously active BRI bandwidth mismatch condition
has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.25.0.22 |
briLossOfLockCondThis alarm indicates that a BRI port is unable to lock
on the incoming bit stream. This is a result of either: the
provisioned protocol does not match the incoming signal, or
the incoming signal is excessively degraded. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.25.0.23 |
briLossOfLockClearA previously active BRI loss of lock condition
has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.25.0.24 |
briTxLockingCondThis alarm indicates that a BRI client port is in the
process of locking on the signal in the transmit direction. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.25.0.25 |
briTxLockingClearA previously active BRI TX locking condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.25.0.26 |
ntpcCondNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.2.26 |
ntpAssocSrvrNotReachableCondThis alarm indicates that an NTP server can not be reached.
This is a result of either: an invalid IP address, network
problems or the server is down. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.26.0.1 |
ntpAssocSrvrNotReachableClearA previously active NTP server not reachable condition
has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.26.0.2 |
ntpAssocSrvrNotRespondingCondThis alarm indicates that an NTP server is reachable but
is not responding to the NTP requests correctly. This can
be a result of either: the server does not have the service
running or there is a server is having problems. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.26.0.3 |
ntpAssocSrvrNotRespondingClearA previously active NTP server not responding condition
has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.26.0.4 |
ntpAssocAuthenFailedCondThis alarm indicates that NTP authentication has failed.
This can be a result of either: the key is configured
incorrectly on the client side or the NTP server does not
accept the key. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.26.0.5 |
ntpAssocAuthenFailedClearA previously active NTP authentication failed condition
has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.26.0.6 |
envCondNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.2.27 |
envAttrUnsupportedCondIndicates that an environmental alarm detection is
configured against a housekeeping input port which is
located on equipment which does not support the configured
function. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.1 |
envAttrUnsupportedClearA previously active environmental attribute unsupported alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.2 |
envAirComprCondIndicates that an environmental air compressor failure
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.3 |
envAirComprClearA previously active environmental air compressor failure
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.4 |
envAirCondCondIndicates that an environmental air conditioning failure
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.5 |
envAirCondClearA previously active environmental air conditioning failure
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.6 |
envAirDryrCondIndicates that an environmental air dryer failure
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.7 |
envAirDryrClearA previously active environmental air dryer failure
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.8 |
envBatDschrdCondIndicates that an environmental battery discharging
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.9 |
envBatDschrdClearA previously active environmental battery discharging
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.10 |
envBatteryCondIndicates that an environmental battery failure
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.11 |
envBatteryClearA previously active environmental battery failure
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.12 |
envClFanCondIndicates that an environmental cooling fan failure
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.13 |
envClFanClearA previously active environmental cooling fan failure
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.14 |
envCpMajorCondIndicates that an environmental centralized power major
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.15 |
envCpMajorClearA previously active environmental centralized power major
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.16 |
envCpMinorCondIndicates that an environmental centralized power minor
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.17 |
envCpMinorClearA previously active environmental centralized power minor
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.18 |
envDoorOpenCondIndicates that an environmental door open
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.19 |
envDoorOpenClearA previously active environmental door open
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.20 |
envEngineCondIndicates that an environmental engine failure
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.21 |
envEngineClearA previously active environmental engine failure
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.22 |
envEngOprgCondIndicates that an environmental engine operating
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.23 |
envEngOprgClearA previously active environmental engine operating
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.24 |
envExplGsCondIndicates that an environmental explosive gas
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.25 |
envExplGsClearA previously active environmental explosive gas
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.26 |
envFirDetrCondIndicates that an environmental fire detector failure
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.27 |
envFirDetrClearA previously active environmental fire detector failure
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.28 |
envFireCondIndicates that an environmental fire
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.29 |
envFireClearA previously active environmental fire
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.30 |
envFloodCondIndicates that an environmental flood
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.31 |
envFloodClearA previously active environmental flood
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.32 |
envFuseCondIndicates that an environmental fuse
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.33 |
envFuseClearA previously active environmental fuse
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.34 |
envGenCondIndicates that an environmental generator failure
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.35 |
envGenClearA previously active environmental generator failure
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.36 |
envGenericCondIndicates that an environmental generic
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.37 |
envGenericClearA previously active environmental generic
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.38 |
envHiAirCondIndicates that an environmental high airflow
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.39 |
envHiAirClearA previously active environmental high airflow
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.40 |
envHiHumCondIndicates that an environmental high humidity
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.41 |
envHiHumClearA previously active environmental high humidity
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.42 |
envHiTempCondIndicates that an environmental high temperature
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.43 |
envHiTempClearA previously active environmental high temperature
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.44 |
envHiWindCondIndicates that an environmental high wind
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.45 |
envHiWindClearA previously active environmental high wind
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.46 |
envHiWtrCondIndicates that an environmental high water
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.47 |
envHiWtrClearA previously active environmental high water
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.48 |
envIceBuildupCondIndicates that an environmental ice buildup
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.49 |
envIceBuildupClearA previously active environmental ice buildup
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.50 |
envIntruderCondIndicates that an environmental intrusion
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.51 |
envIntruderClearA previously active environmental intrusion
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.52 |
envLwBatvgCondIndicates that an environmental low battery voltage
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.53 |
envLwBatvgClearA previously active environmental low battery voltage
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.54 |
envLwFuelCondIndicates that an environmental low fuel
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.55 |
envLwFuelClearA previously active environmental low fuel
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.56 |
envLwHumCondIndicates that an environmental low humidity
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.57 |
envLwHumClearA previously active environmental low humidity
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.58 |
envLwPresCondIndicates that an environmental low cable pressure
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.59 |
envLwPresClearA previously active environmental low cable pressure
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.60 |
envLwTempCondIndicates that an environmental low temperature
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.61 |
envLwTempClearA previously active environmental low temperature
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.62 |
envLwWtrCondIndicates that an environmental low water
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.63 |
envLwWtrClearA previously active environmental low water
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.64 |
envMiscCondIndicates that an environmental miscellaneous
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.65 |
envMiscClearA previously active environmental miscellaneous
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.66 |
envOpenDrCondIndicates that an environmental open door
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.67 |
envOpenDrClearA previously active environmental open door
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.68 |
envPowerCondIndicates that an environmental power failure
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.69 |
envPowerClearA previously active environmental power failure
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.70 |
envPumpCondIndicates that an environmental pump failure
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.71 |
envPumpClearA previously active environmental pump failure
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.72 |
envRectCondIndicates that an environmental rectifier failure
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.73 |
envRectClearA previously active environmental rectifier failure
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.74 |
envRectHiCondIndicates that an environmental rectifier high voltage
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.75 |
envRectHiClearA previously active environmental rectifier high voltage
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.76 |
envRectLoCondIndicates that an environmental rectifier low voltage
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.77 |
envRectLoClearA previously active environmental rectifier low voltage
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.78 |
envSmokeCondIndicates that an environmental smoke
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.79 |
envSmokeClearA previously active environmental smoke
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.80 |
envToxicGasCondIndicates that an environmental toxic gas
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.81 |
envToxicGasClearA previously active environmental toxic gas
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.82 |
envVentnCondIndicates that an environmental ventilation system failure
alarm is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.83 |
envVentnClearA previously active environmental ventilation system failure
alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.2.27.0.84 |
olCondNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.2.28 |
erpsCondNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.2.29 |
swMemberCondNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.2.30 |
dbChangeNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.3 |
dbChangeEvtThis message indicates that a change has been made in the
value of the provisioned object identified by the dbChangeOID
Var-Bind. If multiple objects have been changed in the same
transaction, there will be multiple occurrances of the
dbChangeOID object listed in the Var-Bind list. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.3.0.2 |
dbChangeSecuEvtThis message indicates that a change has been made in the
value of the SNMP community string, SNMP trap reciever, or
Tl1User. NOTIFICATION-TYPE .1.3.6.1.4.1.18070.2.2.2.3.0.3 |
dbChangeNotificationsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.3.1 |
dbChangeDateAndTimeThe date and time at which a database change notification was
issued by the system.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18070.2.2.2.3.1.1 |
dbChangeSeqNumA integer value indicating the place of a database change
notification message within the continual sequence of all
database messages issued by the system.ro Unsigned32 .1.3.6.1.4.1.18070.2.2.2.3.1.2 |
dbChangeOIDThe OID of the object instance whose value has been changed in
the database.ro OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.3.1.3 |
notificationObjects OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.4 |
trapSeqNumA integer value indicating the place of the trap notification
message within the continual sequence of all notification
messages issued by the system.ro Unsigned32 .1.3.6.1.4.1.18070.2.2.2.4.1 |
notificationControl OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.5 |
condNotifCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.5.1 |
condNotifCtrlTableThis table contains one row for every condition notification
associated with a raise. SEQUENCE OF CondNotifCtrlEntry .1.3.6.1.4.1.18070.2.2.2.5.1.1 |
condNotifCtrlEntryThe conceptual row object of the condition notification control
table. CondNotifCtrlEntry .1.3.6.1.4.1.18070.2.2.2.5.1.1.1 |
condNotifObjIdThe specific condition notification to set the severity for.
The value must correspond to the raise condition not the clear. OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.5.1.1.1.1 |
condNotifSeverityThe severity associated with the condition notification.
- Only certain values are permitted for the set:
default, critial, major, minor, notAlarmed.
- Only certain values are visible for the get:
critial, major, minor, major-minor, notAlarmedrw CondSeverity .1.3.6.1.4.1.18070.2.2.2.5.1.1.1.2 |
condNotifDefaultSeverityThe default severity associated with the condition notification.
Only certain of the CondSeverity values are visible:
critial, major, minor, major-minor, notAlarmedro CondSeverity .1.3.6.1.4.1.18070.2.2.2.5.1.1.1.3 |
envCondAttrTableThis table is used to manage the configuration of
environmental alarm inputs. It contains one row for
each environmental condition input on the NE. SEQUENCE OF EnvCondAttrEntry .1.3.6.1.4.1.18070.2.2.2.5.1.2 |
envCondAttrEntryThe conceptual row object of the environmental condition
attribute table. EnvCondAttrEntry .1.3.6.1.4.1.18070.2.2.2.5.1.2.1 |
envCondAttrHKIIdxThe number of the housekeeping input which drives the
activation of the environmental condition configured by this
entry of the table. INTEGER .1.3.6.1.4.1.18070.2.2.2.5.1.2.1.1 |
envCondAttrSeverityThe severity reported for the configured environmental
condition when it is raised. The valid values are:
- minor
- major
- critical
- notAlarmedrw CondSeverity .1.3.6.1.4.1.18070.2.2.2.5.1.2.1.2 |
envCondAttrCodeTypeThe code for the specific environmental condition that
is reported when the housekeeping input indicates that
the condition is active.rw EnvNotifCodeType .1.3.6.1.4.1.18070.2.2.2.5.1.2.1.3 |
envCondAttrDescriptionThe textual decription of the environmental condition
that is reported when the condition is raised.rw DisplayString .1.3.6.1.4.1.18070.2.2.2.5.1.2.1.4 |
envCondAttrInputTypeSpecifies how the housekeeping input which drives the
reporting of the environmental condition is interpreted.rw Enumeration .1.3.6.1.4.1.18070.2.2.2.5.1.2.1.5 |
eventNotifCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.18070.2.2.2.5.2 |
eventNotifStateAllows all events to be either disabled or enabled.rw Enumeration .1.3.6.1.4.1.18070.2.2.2.5.2.1 |