BSTD-OPT-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
62
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
62 total| Object Name |
|---|
codex OBJECT IDENTIFIER .1.3.6.1.4.1.449 |
RFC1155-SMI Unknown .1.3.6.1.4.1.449 |
cdxProductSpecific OBJECT IDENTIFIER .1.3.6.1.4.1.449.2 |
cdx6500 OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1 |
cdx6500Configuration OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2 |
cdx6500CfgProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1 |
cdx6500PCTPortProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1.1 |
cdx6500PPCTBSTDPortTableA table of BSTD Port configuration parameters. SEQUENCE OF Cdx6500PPCTBSTDPortEntry .1.3.6.1.4.1.449.2.1.2.1.1.14 |
cdx6500PPCTBSTDPortEntryA BSTD Configuration Table entry. Each entry
contains the configuration parameters for a single
BSTD port. Cdx6500PPCTBSTDPortEntry .1.3.6.1.4.1.449.2.1.2.1.1.14.1 |
cdx6500BSTDCfgPortNumberThe BSTD port number described by this entry.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.14.1.1 |
cdx6500BSTDCfgPADTypeIndicates whether the port is functioning as a
Terminal PAD (tpad) or a Host PAD (hpad).
newvalTpad - same functionality as 'tpad', new enumeration
introduced for RFC1155 compatibility.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.14.1.2 |
cdx6500BSTDCfgLineInterfaceSelects the line interface to use.
sync - synchronous operation.
async - asynchronous operation.
newvalSync - same functionality as 'sync', new enumeration
introduced for RFC1155 compatibility.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.14.1.3 |
cdx6500BSTDCfgClockSourceint - internal clock source
ext - external clock source.
newvalInt - same functionality as 'int', new enumeration
introduced for RFC1155 compatibility.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.14.1.4 |
cdx6500BSTDCfgClockSpeedThis is the speed of the port in bits per second,
when using internal clocking.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.14.1.5 |
cdx6500BSTDCfgSyncContentionIndicates whether Half Duplex (hdx) or
Full Duplex (fdx) modem signals are being generated.
Full Duplex indicates communication is occuring
in both directions simultaneously between devices.
Half Duplex indicates transmission is occuring
in both directions, but only in one direction
at a time.
newvalHdx - same functionality as 'hdx', new enumeration
introduced for RFC1155 compatibility.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.14.1.6 |
cdx6500BSTDCfgAsyncConnTypeSpecify the control signal handshake required for a
connection to be made to this port:
simp - simple, no control signals required
simpa - CTS follows RTS, but no control signals required
Note: applicable for asynchronous operation only.
newvalSimp - same functionality as 'simp', new enumeration
introduced for RFC1155 compatibility.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.14.1.7 |
cdx6500BSTDCfgNumDevicesSpecifies the number of physical devices on this line.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.14.1.8 |
cdx6500BSTDCfgServTimerThe Service Timer specifies the interval of time in
seconds between periodic servicing. Such servicing
includes intervals between the time the PAD will
attempt to poll devices that previously failed to
respond and intervals between failures in attempts
to establish a connection from a device configured
for Autocall.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.14.1.9 |
cdx6500BSTDCfgErrThreshCountIndicates number of consecutive errors that can occur
before a device is considered down.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.14.1.10 |
cdx6500BSTDCfgResponseTimeoutSpecifies the amount of time in msec the PAD allows
a terminal, printer or host to respond. As a result,
the TPAD may re-transmit the previous message or abort
the current procedure.
The HPAD aborts the current procedure as though EOT
was received, allowing this HPAD station to disconnect
it's X.25 circuit if the host malfunctions. An HPAD with
a response timeout shorter than the hosts ability to respond
may result in Inbound Errors.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.14.1.11 |
cdx6500BSTDCfgPadProtTimeoutSpecifies the maximum amount of time in seconds the PAD
will wait for the end of a multi-packet message from the
network. If this time limit
is exceeded, the PAD will initiate the clearing of the
circuit.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.14.1.12 |
cdx6500BSTDCfgTranNumbersThis parameter is used to select the BSTD Transmission
Numbering's mode of operation.
disable - Disable Transmission Numbering
modulo2 - Alternating '0' and '1' scheme.
newvalDisable - same functionality as 'disable', new
enumeration introduced for RFC1155 compatibility.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.14.1.13 |
cdx6500BSTDCfgContentionModeFor a TPAD port only : This parameter enables or
disables a TPAD port to use BSTD Contention Mode.
Note that an HPAD must have this option set to Enable.
disable - Disable Contention Mode
enable - Enable Contention Mode.
newvalDisable - same functionality as 'disable', new
enumeration introduced for RFC1155 compatibility.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.14.1.14 |
cdx6500BSTDCfgPortSubAddr0 - 3 Decimal digits
Calls addressed to this node and with this subaddress
will be routed to this port.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.14.1.15 |
cdx6500BSTDCfgPortOptionsThis object has been deprecated,
It is replaced by cdx6500BSTDPortOptString.rodeprecated Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.14.1.16 |
cdx6500BSTDCfgRestrictConnDest0 - 3 Decimal digits or a single blank
All calls originating from this port will be routed to
the destination specified in this parameter, irrespective
of route selection table entries. For example, to route
calls to port 1, use P1. To route calls to port 2,
station 4, use P2S4.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.14.1.17 |
cdx6500BSTDCfgBillRecThis controls whether billing (accounting) records will
be created for calls on this Device.
newvalOff - same functionality as 'off', new
enumeration introduced for RFC1155 compatibility.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.14.1.18 |
cdx6500BSTDPortOptStringThis is the new object for cdx6500BSTDPortOption.
Select options on this BSTD port as follows:
NONE - no option specified
ORG - Controllers on this port will originate the calls
ACK - DSP End-to-End Acknowledgements are to be used
Any combination of above specified by summing (e.g. ORG+ACK).ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.14.1.19 |
cdx6500BSTDCfgElectricalInterfaceTypeSpecify the Electrical Interface Type:
V.24 - V.24 Electrical Interface Type
V.35 - V.35 Electrical Interface Type
V.36 - V.36 Electrical Interface Type
X.21 - X.21 Electrical Interface Type
NONE - Electrically disabledro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.14.1.20 |
cdx6500BSTDCfgV24ElectricalInterfaceOptionSpecify the Pin 22 option:
RI - V.24 uses Pin 22 for Ring Indicator output signal
TM - V.24 uses Pin 22 for Test Mode input signalro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.14.1.21 |
cdx6500BSTDCfgHighSpeedElectricalInterfaceOptionSpecify the cable type:
NONE - V.35/V.36/X.21 DCE with straight through cable
XOVER - V.35/V.36/X.21 DCE with crossover adapter cablero Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.14.1.22 |
cdx6500PCTBSTDDeviceGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1.8 |
cdx6500PBCTBSTDDeviceTableA table of BSTD device configuration parameters. SEQUENCE OF Cdx6500PBCTBSTDDeviceEntry .1.3.6.1.4.1.449.2.1.2.1.8.1 |
cdx6500PBCTBSTDDeviceEntryA BSTD Configuration Table entry. Each entry
contains the configuration parameters for a single
BSTD device. Cdx6500PBCTBSTDDeviceEntry .1.3.6.1.4.1.449.2.1.2.1.8.1.1 |
cdx6500BSTDDevPortNumberThe BSTD port accessing this devicero INTEGER .1.3.6.1.4.1.449.2.1.2.1.8.1.1.1 |
cdx6500BSTDDevEntryThe unique number for this specific port.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.8.1.1.2 |
cdx6500BSTDStationAddr1This is the first byte of this Station's address.
The Station address consists of two hexadecimal digits.
The valid range for a digit is 20-7F.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.8.1.1.3 |
cdx6500BSTDStationAddr2This is the second byte of this Station's address.
The Station address consists of two hexadecimal digits.
The valid range for a digit is 20-7F.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.8.1.1.4 |
cdx6500BSTDDestStationAddr1This is the first byte for the Station on the remote PAD.
The Destination Station address consists of two hexadecimal
digits. The valid range for a digit is 20-7F.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.8.1.1.5 |
cdx6500BSTDDesstStationAddr2This is the first byte for the Station on the remote PAD.
The Destination Station address consists of two hexadecimal
digits. The valid range for a digit is 20-7F.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.8.1.1.6 |
cdx6500BSTDGroupAddr1This is the first byte of this Station's Group address.
The Group address consists of two hexadecimal digits.
The valid range for a digit is 20-7F.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.8.1.1.7 |
cdx6500BSTDGroupAddr2This is the second byte of this Station's Group address.
The Group address consists of two hexadecimal digits.
The valid range for a digit is 20-7F.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.8.1.1.8 |
cdx6500BSTDCallMnemonicThis mnemonic name is used for originating calls from this
Station.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.8.1.1.9 |
cdx6500BSTDStationEnabledThis parameter is used to enable or disable the operation
of this Station.
no - Disable Station.
yes - Enable Station.
newvalNo - same functionality as 'no', new
enumeration introduced for RFC1155 compatibility.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.8.1.1.10 |
cdx6500Statistics OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3 |
cdx6500StatProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1 |
cdx6500PSTPortProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1.1 |
cdx6500PPSTBSTDPortStatTableA table of BSTD port statistics. SEQUENCE OF Cdx6500BSTDPortStatEntry .1.3.6.1.4.1.449.2.1.3.1.1.14 |
cdx6500BSTDPortStatEntryA BSTD Port Statistic Table entry. Each entry
contains the statistics for a single BSTD port. Cdx6500BSTDPortStatEntry .1.3.6.1.4.1.449.2.1.3.1.1.14.1 |
cdx6500BSTDStatPortNumberThe BSTD port number described by this entry.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.14.1.1 |
cdx6500BSTDPortStatusPort Status indicates whether or not the port
is switched on and is ready for operation. This value
may be one of :
up - Port is up and running.
down - port is down.
disabled - port has been disabled.
enabled - port has been enabled, but is not yet Up
busyOut - port has been set to be disabled as soon as
last active session is disestablished. No
new sessions will be established.
newvalDisabled - same functionality as 'disabled', new
enumeration introduced for RFC1155 compatibility.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.14.1.2 |
cdx6500BSTDPortStatePort State indicates what the port is actually in the
process of doing. This value may be one of :
INACTIVE - H/TPAD port inactive entered during boot
WTPOLSERVE - TPAD is waiting for response to a poll
WTSELRESP - TPAD is waiting for the response to a
select
WTDATARESP - H/TPAD is waiting for data to be
acknowledged
DATA - H/TPAD is in the process of sending/receiving
data
SEL/POL - TPAD is about to select or poll a
controller. This is the most common state
for a TPAD
SELECT - TPAD is about to select a device
POLL - TPAD is about to poll a device
WTENQRESP - H/TPAD is waiting for a NAK response to
an ENQ sent
IDLE - HPAD is waiting for the host to send commands.
This is the most common state of the HPAD
WTEOT - HPAD is waiting for an expected EOT from the
host
FLUSHINGDATA - HPAD encountered an error in the message
received from the host. As a result,
the data is being flushed
WTLCM - HPAD received a read/modify and is waiting for
the response from the TPAD.ro DisplayString .1.3.6.1.4.1.449.2.1.3.1.1.14.1.3 |
cdx6500BSTDPortSpeedThis is the speed of the port if clock is internal. If
clock is external, this is the detected clock speed. If
Port Speed is 0, clock is external, but clocking is not
being received from attatched device.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.14.1.4 |
cdx6500BSTDPortUtilInPercentage of Port input bandwidth in use.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.14.1.5 |
cdx6500BSTDPortUtilOutPercentage of Port output bandwidth in use.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.14.1.6 |
cdx6500BSTDInMsgsNumber of message received since last node, port, or
statistics reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.14.1.7 |
cdx6500BSTDOutMsgsNumber of message sent since last node, port, or
statistics reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.14.1.8 |
cdx6500BSTDInCharsNumber of characters received since last node, port, or
statistics reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.14.1.9 |
cdx6500BSTDOutCharsNumber of characters sent since last node, port, or
statistics reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.14.1.10 |
cdx6500BSTDCharRateInNumber of characters received per second.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.14.1.11 |
cdx6500BSTDCharRateOutNumber of characters sent per second.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.14.1.12 |
cdx6500BSTDCrcBccErrsNumber of CRC errors since last node, port, or
statistics reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.14.1.13 |