BRI-OPT-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for BRI-OPT-MIB.
200
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
200 total| Object Name |
|---|
codex OBJECT IDENTIFIER .1.3.6.1.4.1.449 |
RFC1155-SMI Unknown .1.3.6.1.4.1.449 |
cdxProductSpecific OBJECT IDENTIFIER .1.3.6.1.4.1.449.2 |
cdx6500 OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1 |
cdx6500Configuration OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2 |
cdx6500CfgProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1 |
cdx6500PCTPortProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1.1 |
cdx6500PPCTISDN OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1.1.26 |
cdx6500PPCTBRIConfig OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1.1.26.1 |
cdx6500PPCTBRIPortTableThis table contains BRI Port configuration parameters SEQUENCE OF Cdx6500PPCTBRIPortEntry .1.3.6.1.4.1.449.2.1.2.1.1.26.1.1 |
cdx6500PPCTBRIPortEntryEach PortEntry contains the configuration
parameters for one BRI ISDN port. Cdx6500PPCTBRIPortEntry .1.3.6.1.4.1.449.2.1.2.1.1.26.1.1.1 |
cdx6500BRICfgPortNumberPort number of the port.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.1.1.1 |
cdx6500BRICfgPortTypeThe Port Type of the port.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.26.1.1.1.2 |
cdx6500BRICfgSwitchTypeSpecifies switch type for the central office.
VN4 - French VN4 standard
1TR6 - German switch standard
BTNR - UK Standard
ETSI - Euro-ISDN
5ESS - AT&T switch
NI-1 - National ISDN version 1.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.26.1.1.1.3 |
cdx6500BRICfgVmebugEngineering use only.
Enable/disable the running of the OST VMEBUG debugger.
NOTE: For this to work the flash must be loaded with
the dbg_vmebug file. If the the dbg_vmebug file is not
in flash this parameter will have no effect.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.26.1.1.1.4 |
cdx6500BRICfgTEIThe range is 0..63,127. The range 0..63 indicate a static
TEI provided by the Network subscribing.
127: TEI negotiated.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.1.1.5 |
cdx6500PPCTBRIChan OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2 |
cdx6500PPCTBRIX25ChanTableThis table contains BRI Channel configuration parameters. SEQUENCE OF Cdx6500PPCTBRIX25ChanEntry .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1 |
cdx6500PPCTBRIX25ChanEntryEach ChanEntry contains the configuration
parameters for one BRI ISDN channel. Cdx6500PPCTBRIX25ChanEntry .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1 |
cdx6500BRIX25ChanCfgPortNumberThe BRI port number.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.1 |
cdx6500BRIX25ChanCfgChannelNumConfigured ISDN Channel Number.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.2 |
cdx6500BRIX25ChanCfgChannelTypeISDN channel type.
bChannel - a full duplex, 56 or 64 Kbps
channel.
dChannel - a full duplex, 16 Kbps channel
configured only for packet mode.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.3 |
cdx6500BRIX25ChanCfgAccessTypepermanent : Permanent BRI channels
switched : Switched BRI channels.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.4 |
cdx6500BRIX25ChanCfgTimeslotPhysical channel number for permanent switch
type only.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.5 |
cdx6500BRIX25ChanCfgSPIDService Profile Identifiers (SPID) is to
define the services subscribed to by the
ISDN device that is accessing the ISDN
provider. This value is provided by your
service provider.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.6 |
cdx6500BRIX25ChanCfgISDNCallAccSpecifies the ISDN routing for a setup
message coming from the network.
allCalls : ISDN routing for all setup message coming from the network.
addressOnly : ISDN routing for specified address only.
addressSubaddress : ISDN routing for specified subaddress only.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.7 |
cdx6500BRIX25ChanCfgLocalSubsAddrSpecifies the local subscriber address
which is provided by the service provider.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.8 |
cdx6500BRIX25ChanCfgLocalSubsSubAddrSpecifies the local subscriber subaddress
which is provided by the service provider.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.9 |
cdx6500BRIX25ChanCfgRateAdaptionRate adaption parameter for this channel.
rate56k : Rate of 56 K
rate64k : Rate of 64 K.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.10 |
cdx6500BRIX25ChanCfgProtocolTypeSpecifies the protocol type run over ISDN B channel.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.11 |
cdx6500BRIX25ChanCfgLinkAddrThe logical link address must be set to complementary values
in devices at each end of the link:
dte - link to have logical DTE address (A)
dce - link to have logical DCE address (B)ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.12 |
cdx6500BRIX25ChanCfgNumPVCChannelsNumber of logical channels used for Permanent Virtual
Circuits. The total number of PVC and SVC channels on a
link should be kept as small as possible and consistent
with needs.
PVC connections must be configured in the PVC Table.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.13 |
cdx6500BRIX25ChanCfgStartPVCChanNumThis is the starting logical channel number for the
Permanent Virtual Circuits on this link. Not used if
the number of PVCs = 0.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.14 |
cdx6500BRIX25ChanCfgBNumSVCChannelsNumber of logical channels used in Switched Virtual Circuits.
The total number of PVC and SVC channels on a link should be
kept as small as possible and consistent with needs.
This is a B-channel object.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.15 |
cdx6500BRIX25ChanCfgStartSVCChanNumThis is the starting logical channel number for the
Switched Virtual Circuits on this link. Not used if
the number of SVCs = 0.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.16 |
cdx6500BRIX25ChanCfgInitialFrameSpecify the initial frame required by other end for link
startup:
none - do nothing (other end initiates link-up)
sabm - send SABM
disc - send DISC, then SABMro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.17 |
cdx6500BRIX25ChanCfgT1TransRetryTimerT1 link retry timer value in tenths of a second
(e.g. 30 = 3.0 seconds).ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.18 |
cdx6500BRIX25ChanCfgT4PollTimerThis sets the time an idle link is probed for assurance
of connection to the remote device.
0 - disable the timer
X - X is in tenths of a second (e.g. 40 = 4.0 seconds)
and must be set greater than T1.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.19 |
cdx6500BRIX25ChanCfgBN2TransTriesThe maximum number of attempts allowed to complete a
transmission. This is a B channel objectro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.20 |
cdx6500BRIX25ChanCfgFrameSeqCountPort uses normal or extended frame sequence numbering:
norm - normal sequencing (modulo 8)
ext - extended sequencing (modulo 128)ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.21 |
cdx6500BRIX25ChanCfgBKFrameWindowFrame level window size must be set to the same value in
devices at each end of the link. This is a B-channel object.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.22 |
cdx6500BRIX25ChanCfgPktSeqCountPort uses normal or extended packet level sequence numbers
norm - normal sequencing (Modulo 8)
ext - extended sequencing (Modulo 128)
The value must be the same in devices at each end of the link.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.23 |
cdx6500BRIX25ChanCfgBWPktWindowPacket level window size must be set to the same value in
devices at each end of the link. This is a B-channel object.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.24 |
cdx6500BRIX25ChanCfgBPPktSizeThis is the maximum packet size used on X.25 links.
For proper operation, the size must be the same in devices
at each end of the link. This is a B-channel object.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.25 |
cdx6500BRIX25ChanCfgMaxNegoPktSizeThis is the maximum negotiated packet size allowed for inbound
and outbound calls on this X.25 link.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.26 |
cdx6500BRIX25ChanCfgDataQUpperThresThis is the maximum number of data packets a channel on
this port will queue for transmission before invoking flow
control to the attached channel.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.27 |
cdx6500BRIX25ChanCfgDataQLowerThresThis is the number of data packets a channel on this port will
have queued for transmission when it releases flow control
to the attached channel.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.28 |
cdx6500BRIX25ChanCfgRestartTimerRestart-Request timeout timer in seconds. If timer expires,
request is sent again.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.29 |
cdx6500BRIX25ChanCfgResetTimerReset-Request timeout timer in seconds. If timer expires,
request is sent again.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.30 |
cdx6500BRIX25ChanCfgCallTimerCall-Request timeout timer in seconds. If timer expires,
call is cleared.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.31 |
cdx6500BRIX25ChanCfgClearTimerClear-Request timeout timer in seconds. If timer expires,
request is sent again.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.32 |
cdx6500BRIX25ChanCfgFacToDelFromOutbCallsSpecify facilities deleted from an outbound call before it
is forwarded:
NONE - no facilities deleted
THRO - delete throughput class negotiation
NUI - delete network user identification
CUG - delete closed user group
Any combination of above specified by summing
(e.g. THRO+NUI. . .).ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.33 |
cdx6500BRIX25ChanCfgFacToAddToOutbCallsSpecify facilities added to an outbound call before it
is forwarded:
NONE - no facilities added
REV - add reverse charging
PACK - add packet size negotiation
WIND - add window size negotiation
Any combination of above specified by summing
(e.g. PACK+WIND+. . .).ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.34 |
cdx6500BRIX25ChanCfgFacToBarInOutbCallsSpecify facilities which, if present in an outbound call,
will be blocked by the port:
NONE - no facility blocked
REV - bar reverse charging
FAST - bar fast select
BCUG - bar Bilateral Closed User Group
DGRAM - bar datagram
Any combination of above specified by summing (e.g. REV+FAST).ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.35 |
cdx6500BRIX25ChanCfgFacToBarInInbCallsSpecify facilities which, if present in an inbound call,
will be blocked by the port:
NONE - no facility blocked
BCUG - bar Bilateral Closed User Group
DGRAM - bar datagram
REV - bar Reverse Charging
Any combination of above specified by summing
(e.g. DGRAM+BCUG).ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.36 |
cdx6500BRIX25ChanCfgX25OptionsSelect X.25 options as follows:
NONE - no option specified
1980 - use X.25 1980
NUI - perform network user identification validation check
PDN - connected to Public Data Network
CUD - use call user data subaddressing
IBAR - bar all calls coming in from X.25 port user
OBAR - bar all calls going out to X.25 port user
CBCK - allow routing inbound calls back out this port
CUG - check closed user group; otherwise, CUG passes
transparently
CAUSE - pass cause, diagnostic, code in outbound packets
HOLD - hold calls over link restart
NRST - do not send restart packet on link-up
BKUP - this is a backup port to be activated if other ports
are down
INL - inter-node link. Link goes to another 6500 device
INLA - set with INL option when an X.25 link connection is to
a 6500 node using 2.12.04 or earlier
DELAY - Enable Delay and Path Trace on this link
(link must be connected to Rel. 4.xx node)
Any combination of above specified by summing
(e.g. 1980+NUI+. . .).ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.37 |
cdx6500BRIX25ChanCfgNumRoutDgtInCallUsrDataThis specifies the number of routing digits in the call user
data. It is used on X.25 links attached to a Public Data
Network where the private network address is carried in the
call user data.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.38 |
cdx6500BRIX25ChanCfgNumPreAddrDgstrpOutgCallsFor X.25 links connected to a Public Data Network,
this parameter specifies the number of prefix digits to
remove from the called address before forwarding the call
to the PDN.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.39 |
cdx6500BRIX25ChanCfgInDigitsToStripFor X.25 links connected to a Public Data Network, this
parameter specifies the number of prefix digits to remove
from the incoming calling address before forwarding the call
from the PDN.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.40 |
cdx6500BRIX25ChanCfgRestrictedConnDestAll calls entering this port will be routed to the destination
specified in this parameter, irrespective of route selection
table entries.
For example, to route all calls to X.25 port 3, use X25-3.
To route calls to SDLC port 2, station 4, use SDLC-2S4.
Function is disabled for blank field.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.41 |
cdx6500BRIX25ChanCfgPortAddressOn X.25 links:
If the X.25 Option REGO, REGSO or REGI is selected, this
address is inserted into the calling address field of the
outbound or inbound call packet.
On MUX links:
When a MUX channel makes a call, the subaddress of the channel
is appended to this address and inserted into the calling
address field of the call packet.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.42 |
cdx6500BRIX25ChanCfgCUGMembershipThe port may be a member of up to 8 different Closed User
Groups (CUGs).
Each CUG membership must be a two digit number (except double
dash) and separated by a comma. ( e.g. 12,34,56,09,02,03 ).
00-99 - CUG Membershipro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.43 |
cdx6500BRIX25ChanCfgBillingRecordsThis controls whether billing (accounting) records will
be created for calls on this port.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.44 |
cdx6500BRIX25ChanCfgSubAddrSizeFor ports connected to a Public Data Network, this parameter
specifies the number of digits in the subaddress of an X.25
address.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.45 |
cdx6500BRIX25ChanCfgCallSecurityFor ports used as V.25 bis or SW56K backup, this parameter
specifies the type of call security to use prior to the link
being detected up.
disable - Disable will allow both incoming and outgoing calls.
enable - Enable will allow ONLY outgoing calls. Incoming calls
will be immediately terminated.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.46 |
cdx6500BRIX25ChanCfgProtectionLevelThis specifies the level of data or connection protection
which will be applied to calls to or from this port.
The actual level for a call will be negotiated to the lesser
of this level and the level configured for the other end of
the call.
none - No protection
cpOnly - Connection protection only
fullDcp - Full data and connection protectionro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.47 |
cdx6500BRIX25ChanCfgReconnTimeoutThis specifies the number of seconds that DCP on the
originating side will wait between reconnection attempts.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.48 |
cdx6500BRIX25ChanCfgReconnTriesLtThis specifies the number of times that DCP on the originating
side will attempt to reconnect before clearing the call. For0,
it will not attempt to reconnect.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.49 |
cdx6500BRIX25ChanCfgFacSubsCtlNONE - Subscription to facilities not enforced.
FCN_ON - Flow Control Negotiation enabled.
Packet and Window size negotiation facilities in
an inbound call will be allowed.
Packet and Window size facilities will always be
included in outbound calls and call accepted/
connected when this parameter is set.
FCN_OFF - Flow Control Negotiation disabled.
Inbound calls containing Packet and Window size
facilities will be cleared. Packet and Window size
facilities will not be present in outbound calls
and call accepted/connected when this parameter is
set.
TCN_ON - Throughput Class Negotiation enabled.
The throughput class negotiation facility in an
inbound call will be allowed. The throughput class
negotiation facility will always be included in
outbound calls and call accepted/connected when
this parameter is set. The facility is passed onward
to the destination in the call packet transparently
and does not alter the handling of the
SVC data within the node.
TCN_OFF - Throughput Class Negotiation disabled.
Inbound calls containing the throughput class
negotiation facility will be cleared. The throughput
class negotiation facility will not be present in
outbound calls and call accepted/connected when this
parameter is set.
Some combinations of above options are allowed
(e.g. FCNON+TCNON)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.50 |
cdx6500BRIX25ChanCfgAlarmPrioritySpecify the severity level of LINK UP and LINK DOWN alarms:
network - Severity HIGH alarms will be generated
access - Severity LOW alarms will be generatedro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.51 |
cdx6500BRIX25ChanCfgChanTEITerminal Endpoint Identifier. Value is
provided by the service provider.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.52 |
cdx6500BRIX25ChanCfgX25NetworkTypeSpecifies the X.25 Network Type:
Transpac, PSS, Datanet, Telenet.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.53 |
cdx6500BRIX25ChanCfgDNumSVCChannelsSpecifies the number of logical SVC channels on this
port. This is a D-channel object.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.54 |
cdx6500BRIX25ChanCfgDWPktWindowSpecifies the default packet level window size when it is
not negotiated for the individual call. The value must be
the same for both ends of the link.
This is a D-channel object.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.55 |
cdx6500BRIX25ChanCfgDPPktSizeSpecifies the maximum default packet size (in bytes) for
inbound and outbound calls on the link. The
value must be the same for both ends of the link.
This is a D-channel object.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.56 |
cdx6500BRIX25ChanCfgDKFrameWindowSpecifies the number of unacknowledged frames that can be
outstanding. When there is a high link delay, set this
parameter to a high value to improve throughput. The setting
for this parameter should be the same for the devices on both
ends of the link. This is a D-channel object.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.57 |
cdx6500BRIX25ChanCfgDN2TransTriesSpecifies the maximum number of times a frame is resent
before disconnect. This is a D-channel object.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.58 |
cdx6500BRIX25ChanCfgT1TimerSets the T1 Retry Timer. The values are in tenths of a second.
(30 = 3.0 seconds)ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.59 |
cdx6500BRIX25ChanCfgT2TimerSets the T2 timer. The values are in tenths of a second.
(40 = 4.0 seconds)ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.60 |
cdx6500BRIX25ChanCfgLinkTypeEngineering use only.
Sets the link type:
dChannel - Run over the D channel
v24Dte - DTE on the V.24 port
v24Dce - DCE on the V.24 portro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.61 |
cdx6500BRIX25ChanCfgAddrTransSelect any of the following address translation options
NONE - no option specified
Outbound Call Processing:
DEDO - delete called address
DEGO - delete calling address
REGO - replace calling address with configured Port Address
REGSO - replace calling address with configured Port
Address plus Inbound Subaddress obtained from
the Inbound Call Translation Table entry where
Private Network Address matches the entire
calling address
INGO - replace calling address with configured Port
Address and retain original calling subaddress
SAGO - strip calling address, but retain subaddress
Inbound Call Processing:
INGI - replace calling address with configured Port
Address and retain original calling subaddress
REGI - replace calling address with configured Port Address
SRGI - select route from the Calling Address
Translation Table by replacing the called
address with the Private Network Address
where the Inbound Calling Address matches
the beginning of the calling address
Call Accept Processing:
DADA - delete called address in inbound/outbound
call accept
DAGA - delete calling address in inbound/outbound
call accept
IADD - copy called and calling addresses from call
request into outbound call accepted/connected
Some of the options may be combined (e.g. DEDO + DEGO).ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.62 |
cdx6500Statistics OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3 |
cdx6500StatProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1 |
cdx6500PSTPortProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1.1 |
cdx6500BRIStats OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1.1.27 |
cdx6500BRIPStatsTableA table of BRI port statistics. SEQUENCE OF Cdx6500BRIPStatsTableEntry .1.3.6.1.4.1.449.2.1.3.1.1.27.1 |
cdx6500BRIPStatsTableEntryEach entry contains the statistics for a single BRI port. Cdx6500BRIPStatsTableEntry .1.3.6.1.4.1.449.2.1.3.1.1.27.1.1 |
cdx6500BRIPStatPortNumberThe port number of the BRI port.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.1 |
cdx6500BRIPStatPortTypeThe Port Type of the port.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.2 |
cdx6500BRIPStatPortStatusStatus of this port :
Enabled - Port is enabled
Disabled - Port is disabled
Busyout - Port has been busied out
Unknown - Port not recognized
Init Failed - Port initialization failed.ro DisplayString .1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.3 |
cdx6500BRIPStatNumConfigChannelsThe number of configured channels.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.4 |
cdx6500BRIPStatSwitchTypeSpecifies switch type for the central office.
VN4 : French VN4 standard
1TR6 : German switch standard
BTNR : UK Standard
ETSI : Euro-ISDN
5ESS : AT&T switch
NI-1 : National ISDN version 1ro DisplayString .1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.5 |
cdx6500BRIPStatTEITerminal Endpoint Identifier.
The range of values [0 - 63] indicate a static
TEI provided by the Network subscribing.
127: TEI negotiatedro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.6 |
cdx6500BRIPStatLastStatsResetTime when the statistics were last reset.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.7 |
cdx6500BRIPStatCharsInTotNumber of characters received since last node,
port or statistics reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.8 |
cdx6500BRIPStatCharsInPerSecAverage number of characters received per second
since last node, port or statistics reset.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.9 |
cdx6500BRIPStatCharsOutTotNumber of characters sent since last node,
port or statistics reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.10 |
cdx6500BRIPStatCharsOutPerSecAverage number of characters sent per second
since last node, port or statistics reset.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.11 |
cdx6500BRIPStatFramesInTotNumber of frames received since last node,
port or statistics reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.12 |
cdx6500BRIPStatFramesInPerSecAverage number of Frames received per second
since last node, port or statistics reset.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.13 |
cdx6500BRIPStatFrameOutTotNumber of frames sent since last node,
port or statistics reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.14 |
cdx6500BRIPStatFrameOutPerSecAverage number of Frames sent per second
since last node, port or statistics reset.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.15 |
cdx6500BRIPStatAvFrameSzInAverage size of the frames received.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.16 |
cdx6500BRIPStatAvFrameSzOutAverage size of the frames sent.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.17 |
cdx6500BRIPStatPortUtilInCurrent inbound port utilization.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.18 |
cdx6500BRIPStatPortUtilOutCurrent outbound port utilization.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.19 |
cdx6500BRIPStatPortUtilInMaxMaximum inbound port utilization.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.20 |
cdx6500BRIPStatPortUtilOutMaxMaximum outbound port utilization.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.21 |
cdx6500BRIChanStatsTableA table of BRI channel statistics. SEQUENCE OF Cdx6500BRIChanStatsTableEntry .1.3.6.1.4.1.449.2.1.3.1.1.27.2 |
cdx6500BRIChanStatsTableEntryEach entry contains the statistics for a single channel. Cdx6500BRIChanStatsTableEntry .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1 |
cdx6500BRICStatsPortNumberThe BRI port number associated with the channels.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.1 |
cdx6500BRICStatsChannelNumThe ISDN channel Number.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.2 |
cdx6500BRICStatsChannelTypeISDN channel type.
B Channel : a full duplex, 56 or 64 Kbps channel.
D Channel : a full duplex, 16 Kbps channel
configured only for packet mode.
Unknown : unknown channel type .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.3 |
cdx6500BRICStatsAccessTypeSwitched BRI channel type.
Permanent channel type : not supported in this version
Unknown : unknown access type .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.4 |
cdx6500BRICStatsProtocolTypeSpecifies the protocol type such as X25, FRI.
`Unknown' indicates unknown protocol type.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.5 |
cdx6500BRICStatsCallStateCall State:
Disconnected - Call in Idle state
Ringing - Trying to establish connection
Connected - Call connected
Disabled - Call disabled
Congested - not supported
Unknown - unknown state .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.6 |
cdx6500BRICStatsChannelStatusDisabled - Channel disabled.
Enabled - Channel enabled.
Busyout - Channel busyout
Unknown - unknown status.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.7 |
cdx6500BRICStatsInCurCallAddrThe address for the current inbound ISDN call.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.8 |
cdx6500BRICStatsInCurCallSubAddrThe subaddress for the current ISDN call.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.9 |
cdx6500BRICStatsInAvConnTmAverage connection time for an inbound ISDN call.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.10 |
cdx6500BRICStatsInCurConnTmCurrent connection time for an inbound ISDN call.
current time - Time connection started.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.11 |
cdx6500BRICStatsInMinConnTmMinimum connection time for an inbound ISDN call.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.12 |
cdx6500BRICStatsInMaxConnTmMaximum connection time for an inbound ISDN call.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.13 |
cdx6500BRICStatsInNumSuccCallsTotal number of successful inbound calls.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.14 |
cdx6500BRICStatsInNumFailCallsTotal number of unsuccessful inbound calls.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.15 |
cdx6500BRICStatsOutCurCallAddrThe address of the current ISDN outbound call.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.16 |
cdx6500BRICStatsOutCurCallSubAddrThe subaddress of the current ISDN outbound call.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.17 |
cdx6500BRICStatsOutAvConnTmAverage connection time for an outbound call.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.18 |
cdx6500BRICStatsOutCurConnTmCurrent connection time for an outbound call.
Current time - Time connection started.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.19 |
cdx6500BRICStatsOutMinConnTmMinimum connection time for an outbound call.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.20 |
cdx6500BRICStatsOutMaxConnTmMaximum connection time for an outbound call.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.21 |
cdx6500BRICStatsOutNumSuccCallsTotal number of successful outbound calls.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.22 |
cdx6500BRICStatsOutNumFailCallsTotal number of unsuccessful outbound calls.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.23 |
cdx6500BRICStatsMaxSVCMaximum number of async Switched Virtual Circuit channels.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.24 |
cdx6500BRICStatsMaxPVCMaximum number of async Permanent Virtual Circuit channels.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.25 |
cdx6500BRICStatsCurSVCCurrent number of async Switched Virtual Circuit channels.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.26 |
cdx6500BRICStatsCurPVCCurrent number of async Permament Virtual Circuit channels.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.27 |
cdx6500BRICStatsLastRepReasonCodesLast Reason codes returned from the network and
Last Return code from Transparent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.28 |
cdx6500BRICStatsLastStatsResetTime when the node restarted or the stats reset by CTP
command .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.29 |
cdx6500BRICStatsCharsInTotNumber of characters received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.30 |
cdx6500BRICStatsCharsOutTotNumber of characters sent.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.31 |
cdx6500BRICStatsCharsInPerSecAverage number of characters received per second.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.32 |
cdx6500BRICStatsCharsOutPerSecAverage number of characters sent per second.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.33 |
cdx6500BRICStatsPktsInTotNumber of packets received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.34 |
cdx6500BRICStatsPktsOutTotNumber of packets sent.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.35 |
cdx6500BRICStatsPktsInPerSecAverage number of packets received per second.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.36 |
cdx6500BRICStatsPktsOutPerSecAverage number of packets sent per second.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.37 |
cdx6500BRICStatsFramesInTotTotal number of frames received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.38 |
cdx6500BRICStatsFramesOutTotTotal number of frames sent.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.39 |
cdx6500BRICStatsFramesInPerSecAverage number of frames received per second.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.40 |
cdx6500BRICStatsFramesOutPerSecAverage number of frames sent per second.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.41 |
cdx6500BRICStatsInfoFramesInNumber of Information frames received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.42 |
cdx6500BRICStatsInfoFramesOutNumber of Information frames sent.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.43 |
cdx6500BRICStatsRNRFramesInNumber of Receiver Not Ready (RNR) frames received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.44 |
cdx6500BRICStatsRNRFramesOutNumber of Receiver Not Ready (RNR) frames sent.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.45 |
cdx6500BRICStatsSABMFramesInNumber of Set Asynchronous Balanced Mode (SABM) frames
received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.46 |
cdx6500BRICStatsSABMFramesOutNumber of Set Asynchronous Balanced Mode (SABM) frames sent.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.47 |
cdx6500BRICStatsDMFramesInNumber of Disconnect Mode (DM) frames received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.48 |
cdx6500BRICStatsDMFramesOutNumber of Disconnect Mode (DM) frames sent.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.49 |
cdx6500BRICStatsRRFramesInNumber of Receiver Ready (RR) frames received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.50 |
cdx6500BRICStatsRRFramesOutNumber of Receiver Ready (RR) frames sent.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.51 |
cdx6500BRICStatsREJFramesInNumber of Reject (REJ) frames received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.52 |
cdx6500BRICStatsREJFramesOutNumber of Reject (REJ) frames sent.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.53 |
cdx6500BRICStatsDISCFramesInNumber of Disconnect (DISC) frames received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.54 |
cdx6500BRICStatsDISCFramesOutNumber of Disconnect (DISC) frames sent.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.55 |
cdx6500BRICStatsUAFramesInNumber of Unnumbered Acknowledgement (UA) frames received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.56 |
cdx6500BRICStatsUAFramesOutNumber of Unnumbered Acknowledgement (UA) frames sent.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.57 |
cdx6500BRICStatsFRMRFramesInNumber of Frame Reject (FRMR) frames received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.58 |
cdx6500BRICStatsFRMRFramesOutNumber of Frame Reject (FRMR) frames sent.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.59 |
cdx6500BRICStatsDataPktsInTotal Number of Data packets received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.60 |
cdx6500BRICStatsDataPktsOutTotal Number of Data packets sent.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.61 |
cdx6500BRICStatsRRPktsInTotal Number of Receiver Ready (RR) packets received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.62 |
cdx6500BRICStatsRRPktsOutTotal Number of Receiver Ready (RR) packets sent.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.63 |
cdx6500BRICStatsRNRPktsInTotal Number of Receiver Not Ready (RNR) packets received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.64 |
cdx6500BRICStatsRNRPktsOutTotal Number of Receiver Not Ready (RNR) packets sent.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.65 |
cdx6500BRICStatsRejPktsInTotal Number of Reject packets received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.66 |
cdx6500BRICStatsRejPktsOutTotal Number of Reject packets sent.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.67 |
cdx6500BRICStatsCallReqPktsInTotal Number of Call Request packets received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.68 |
cdx6500BRICStatsCallReqPktsOutTotal Number of Call Request packets sent.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.69 |
cdx6500BRICStatsCallAccPktsInTotal Number of Call Accept packets received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.70 |
cdx6500BRICStatsCallAccPktsOutTotal Number of Call Acceptt packets sent.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.71 |
cdx6500BRICStatsClrReqPktsInTotal Number of Clear Request packets received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.72 |
cdx6500BRICStatsClrReqPktsOutTotal Number of Clear Request packets sent.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.73 |
cdx6500BRICStatsClrConfPktsInTotal Number of Clear Confirmation packets received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.74 |
cdx6500BRICStatsClrConfPktsOutTotal Number of Clear Confirmation packets sent.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.75 |
cdx6500BRICStatsIntReqPktsInTotal Number of Interrupt Request packets received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.76 |
cdx6500BRICStatsIntReqPktsOutTotal Number of Interrupt Request packets sent.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.77 |
cdx6500BRICStatsIntConfPktsInTotal Number of Interrupt Confirmation packets received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.78 |
cdx6500BRICStatsIntConfPktsOutTotal Number of Interrupt Confirmation packets sent.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.79 |
cdx6500BRICStatsRstReqPktsInTotal Number of Reset Request packets received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.80 |
cdx6500BRICStatsRstReqPktsOutTotal Number of Reset Request packets sent.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.81 |
cdx6500BRICStatsRstConfPktsInTotal Number of Reset Confirmation packets received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.82 |
cdx6500BRICStatsRstConfPktsOutTotal Number of Reset Confirmation packets sent.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.83 |
cdx6500BRICStatsRestartReqPktsInTotal Number of Restart Request packets received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.84 |
cdx6500BRICStatsRestartReqPktsOutTotal Number of Restart Request packets sent.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.85 |
cdx6500BRICStatsRestartConfPktsInTotal Number of Restart Confirmation packets received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.86 |
cdx6500BRICStatsRestartConfPktsOutTotal Number of Restart Confirmation packets sent.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.87 |
cdx6500BRICStatsTEITerminal Endpoint Identifier provided by the Network
subscribing.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.88 |
cdx6500BRICStatsSAPIService Access Point Identifier.
A value of 16 is reserved for Packet-mode communication on
the D-channel using X.25 level 3.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.89 |
cdx6500BRICStatsNetworkTypeSpecifies the X.25 Network Type:
Transpac, PSS, Datanet, Telenet, Unknown .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.90 |