BPDU-PROTECTION-MIB
The structure of BPDU Protection management for the proprietary enterprise.
Main OID:
swBpduProtectionMIB.1.3.6.1.4.1.171.12.76
20
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
20 total| Object Name |
|---|
swBpduProtectionMIBThe structure of BPDU Protection management for the proprietary enterprise. MODULE-IDENTITY .1.3.6.1.4.1.171.12.76 |
swBpduProtectionCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.171.12.76.1 |
swBpduProtectionAdminStateThis object indicates the BPDU Protection status for the system.rw Enumeration .1.3.6.1.4.1.171.12.76.1.1 |
swBpduProtectionRecoveryTimeThis object indicates the recovery time. The range is from 60 to 1000000 sec. The value of 0 disables the recover function.rw INTEGER (0|60..1000000) .1.3.6.1.4.1.171.12.76.1.2 |
swBpduProtectionTrapModeThis object indicates the BPDU Protection trap mode for the system.rw Enumeration .1.3.6.1.4.1.171.12.76.1.3 |
swBpduProtectionLogModeThis object indicates the BPDU Protection log mode for the system.rw Enumeration .1.3.6.1.4.1.171.12.76.1.4 |
swBpduProtectionInfo OBJECT IDENTIFIER .1.3.6.1.4.1.171.12.76.2 |
swBpduProtectionMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.12.76.3 |
swBpduProtectionPortTableThe table specifies the BPDU Protection function specified by port. SEQUENCE OF SwBpduProtectionPortEntry .1.3.6.1.4.1.171.12.76.3.1 |
swBpduProtectionPortEntryThe table specifies the BPDU Protection function specified by port. SwBpduProtectionPortEntry .1.3.6.1.4.1.171.12.76.3.1.1 |
swBpduProtectionPortIndexThis object indicates the module's port number. The range is from 1 to the maximum port number specified in the module.ro INTEGER .1.3.6.1.4.1.171.12.76.3.1.1.1 |
swBpduProtectionPortStateThis object indicates the BPDU Protection function state on the port.rw Enumeration .1.3.6.1.4.1.171.12.76.3.1.1.2 |
swBpduProtectionPortModeThis object indicates the BPDU Protection function mode on the port.rw Enumeration .1.3.6.1.4.1.171.12.76.3.1.1.3 |
swBpduProtectionPortStatusThis object indicates the port status.ro Enumeration .1.3.6.1.4.1.171.12.76.3.1.1.4 |
swBpduProtectionNotify OBJECT IDENTIFIER .1.3.6.1.4.1.171.12.76.4 |
swBpduProtectionNotifyPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.171.12.76.4.0 |
swBpduProtectionUnderAttackingTrapWhen the BPDU Protection trap is enabled, if the specific port changes from a normal state to an under attack state, a trap will be sent out. NOTIFICATION-TYPE .1.3.6.1.4.1.171.12.76.4.0.1 |
swBpduProtectionRecoveryTrapWhen the BPDU Protection trap is enabled, if the specific port changes from an under attack state to a normal state, a trap will be sent out. NOTIFICATION-TYPE .1.3.6.1.4.1.171.12.76.4.0.2 |
swBpduProtectionNotificationBidings OBJECT IDENTIFIER .1.3.6.1.4.1.171.12.76.4.2 |
swBpduProtectionRecoveryMethodThis object indicates the method of recovery from BPDU under attack.ro Enumeration .1.3.6.1.4.1.171.12.76.4.2.1 |
More MIBs from D-Link
Browse all D-LinkMIBs →DGS-1210-28XME-BX
SNMP MIB module
2033 objects→
DGS-1210-12TSME-BX
The DGS-1210-12TSME-BX MIB module provides management capabilities for the D-Link DES-1210-52ME switch, specifically enabling the monitoring and configuration of QinQ (802.1ad) VLAN encapsulation parameters, including inner tag insertion and drop counters for unmatched traffic. This module facilitates precise control over service provider bridging (SPB) operations by exposing metrics related to VLAN tag manipulation and packet discard events on the device's managed ports.
2030 objects→
DGS-1210-28XSME-BX
SNMP MIB module
2016 objects→
DGS-1210-28PME_AX
Standard SNMP MIB module defining data structures for DGS-1210-28PME_AX.
1942 objects→
DGS-1210-28ME_AX
Standard SNMP MIB module defining data structures for DGS-1210-28ME_AX.
1941 objects→
DGS-1210-20ME_AX
Standard SNMP MIB module defining data structures for DGS-1210-20ME_AX.
1941 objects→