Home/Catalog/Adapter-1030-MIB

Adapter-1030-MIB

Name: SNMP MIBs and OID Database
Creator: Quadrata FZCO
License: https://opensource.org/licenses/MIT

AI MIB Summary

Standard SNMP MIB module defining data structures for Adapter-1030-MIB.

Objects

Active

Status

Dependencies

Imported Objects

RFC1155-SMI

RFC1213-MIB

RFC-1212

Objects

94 total

Object Name	Syntax	OID
lsi OBJECT IDENTIFIER `.1.3.6.1.4.1.3582`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.3582`
RFC1213-MIB Unknown `.1.3.6.1.4.1.3582`	Unknown	`.1.3.6.1.4.1.3582`
lsiRAID OBJECT IDENTIFIER `.1.3.6.1.4.1.3582.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.3582.2`
c1030 OBJECT IDENTIFIER `.1.3.6.1.4.1.3582.2.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.3582.2.2`
lsiAdapter OBJECT IDENTIFIER `.1.3.6.1.4.1.3582.2.2.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.3582.2.2.1`
adpNumberThe present number of rows in the adapter table.ro Gauge `.1.3.6.1.4.1.3582.2.2.1.1`	Gauge	`.1.3.6.1.4.1.3582.2.2.1.1`
adapterTableA List of adapter Entries containing Information/Properties about the adapters on the Controller. SEQUENCE OF AdapterEntry `.1.3.6.1.4.1.3582.2.2.1.2`	SEQUENCE OF AdapterEntry	`.1.3.6.1.4.1.3582.2.2.1.2`
adapterEntryAn Entry in the adapter table. AdapterEntry `.1.3.6.1.4.1.3582.2.2.1.2.1`	AdapterEntry	`.1.3.6.1.4.1.3582.2.2.1.2.1`
adapterIDAdapterID for this Adapter.(Unique)ro INTEGER `.1.3.6.1.4.1.3582.2.2.1.2.1.1`	INTEGER	`.1.3.6.1.4.1.3582.2.2.1.2.1.1`
numLogicalDrivesNumber of Logical Drives Configured on this Adapter.ro INTEGER `.1.3.6.1.4.1.3582.2.2.1.2.1.2`	INTEGER	`.1.3.6.1.4.1.3582.2.2.1.2.1.2`
initiatorIDSCSI ID for this Adapter.ro INTEGER `.1.3.6.1.4.1.3582.2.2.1.2.1.3`	INTEGER	`.1.3.6.1.4.1.3582.2.2.1.2.1.3`
firmwareVersionThe Firmware Version of the Firmware running on this adapter.ro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.3582.2.2.1.2.1.4`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.3582.2.2.1.2.1.4`
biosVersionThe Bios Version of the BIOS Present in the Flash ROM on this adapter.ro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.3582.2.2.1.2.1.5`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.3582.2.2.1.2.1.5`
subsystemIdThe PCI sub system ID of this adapterro INTEGER `.1.3.6.1.4.1.3582.2.2.1.2.1.6`	INTEGER	`.1.3.6.1.4.1.3582.2.2.1.2.1.6`
subsystemVendorIdThe PCI sub system vendor ID of this adapterro INTEGER `.1.3.6.1.4.1.3582.2.2.1.2.1.7`	INTEGER	`.1.3.6.1.4.1.3582.2.2.1.2.1.7`
productNameThe enriched formation of the adapter retrieved from the firmwarero DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.3582.2.2.1.2.1.8`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.3582.2.2.1.2.1.8`
driverVersionThe version of the driverro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.3582.2.2.1.2.1.9`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.3582.2.2.1.2.1.9`
spinupDelayThis is the Spinup Delay for Spinning Up Physical Drives at Firmware Initialization Time.ro INTEGER `.1.3.6.1.4.1.3582.2.2.1.2.1.10`	INTEGER	`.1.3.6.1.4.1.3582.2.2.1.2.1.10`
adapterTypeType of the adapter.ro Enumeration `.1.3.6.1.4.1.3582.2.2.1.2.1.11`	Enumeration	`.1.3.6.1.4.1.3582.2.2.1.2.1.11`
numDevicesNo of devices attached to the adapterro INTEGER `.1.3.6.1.4.1.3582.2.2.1.2.1.12`	INTEGER	`.1.3.6.1.4.1.3582.2.2.1.2.1.12`
lsiLogicalDrive OBJECT IDENTIFIER `.1.3.6.1.4.1.3582.2.2.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.3582.2.2.2`
ldNumberThe present number of rows in the ld table.ro Gauge `.1.3.6.1.4.1.3582.2.2.2.1`	Gauge	`.1.3.6.1.4.1.3582.2.2.2.1`
logicaldriveTableA List of Logical Drive Entries containing Information/Properties about the Logical Drives Configured in the System. SEQUENCE OF LogicaldriveEntry `.1.3.6.1.4.1.3582.2.2.2.2`	SEQUENCE OF LogicaldriveEntry	`.1.3.6.1.4.1.3582.2.2.2.2`
logicaldriveEntryAn Entry in the Logical Drive Table. LogicaldriveEntry `.1.3.6.1.4.1.3582.2.2.2.2.1`	LogicaldriveEntry	`.1.3.6.1.4.1.3582.2.2.2.2.1`
logicalDriveIDLogical Drive ID for this Logical Drive Entry(Unique).ro INTEGER `.1.3.6.1.4.1.3582.2.2.2.2.1.1`	INTEGER	`.1.3.6.1.4.1.3582.2.2.2.2.1.1`
ldAdapterIDThe Adapter ID for this Instance of Adapter/LogicalDrive object.ro INTEGER `.1.3.6.1.4.1.3582.2.2.2.2.1.2`	INTEGER	`.1.3.6.1.4.1.3582.2.2.2.2.1.2`
ldStateThe State of this Logical Drive.ro Enumeration `.1.3.6.1.4.1.3582.2.2.2.2.1.3`	Enumeration	`.1.3.6.1.4.1.3582.2.2.2.2.1.3`
ldStatusThe Status of this Logical Drive.rw Enumeration `.1.3.6.1.4.1.3582.2.2.2.2.1.4`	Enumeration	`.1.3.6.1.4.1.3582.2.2.2.2.1.4`
sizeInMBThe Configured Size of this Logical Drive.ro INTEGER `.1.3.6.1.4.1.3582.2.2.2.2.1.5`	INTEGER	`.1.3.6.1.4.1.3582.2.2.2.2.1.5`
raidLevelConfigured Raid Level for this Logical Drive.ro Enumeration `.1.3.6.1.4.1.3582.2.2.2.2.1.6`	Enumeration	`.1.3.6.1.4.1.3582.2.2.2.2.1.6`
stripeSizeConfigured Stripe Size for this Logical Drive in KB.ro Enumeration `.1.3.6.1.4.1.3582.2.2.2.2.1.7`	Enumeration	`.1.3.6.1.4.1.3582.2.2.2.2.1.7`
numberOfStripesConfigured Number of Stripes for this Logical Drive.ro INTEGER `.1.3.6.1.4.1.3582.2.2.2.2.1.8`	INTEGER	`.1.3.6.1.4.1.3582.2.2.2.2.1.8`
resyncProgressRESYNCHRONIZATION Progress for this Logical Drive.ro Enumeration `.1.3.6.1.4.1.3582.2.2.2.2.1.9`	Enumeration	`.1.3.6.1.4.1.3582.2.2.2.2.1.9`
physicalDrvsPhysical drive id(s) which are part of this LD.ro DisplayString `.1.3.6.1.4.1.3582.2.2.2.2.1.10`	DisplayString	`.1.3.6.1.4.1.3582.2.2.2.2.1.10`
quiescedPhysical Disk I/O for this Logical Drive are quiesced or not.rw Enumeration `.1.3.6.1.4.1.3582.2.2.2.2.1.11`	Enumeration	`.1.3.6.1.4.1.3582.2.2.2.2.1.11`
sparepoolIDsSpare pool id(s) which are associated with this LD.ro DisplayString `.1.3.6.1.4.1.3582.2.2.2.2.1.12`	DisplayString	`.1.3.6.1.4.1.3582.2.2.2.2.1.12`
lsiDevice OBJECT IDENTIFIER `.1.3.6.1.4.1.3582.2.2.3`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.3582.2.2.3`
pdNumberThe present number of rows in the device table.ro Gauge `.1.3.6.1.4.1.3582.2.2.3.1`	Gauge	`.1.3.6.1.4.1.3582.2.2.3.1`
deviceTableA List of Physical Device Entries containing Information about the Physical Devices in the System. SEQUENCE OF DeviceEntry `.1.3.6.1.4.1.3582.2.2.3.2`	SEQUENCE OF DeviceEntry	`.1.3.6.1.4.1.3582.2.2.3.2`
deviceEntryAn Entry in the Device Table. DeviceEntry `.1.3.6.1.4.1.3582.2.2.3.2.1`	DeviceEntry	`.1.3.6.1.4.1.3582.2.2.3.2.1`
physDevIDThe unique Device IDro INTEGER `.1.3.6.1.4.1.3582.2.2.3.2.1.1`	INTEGER	`.1.3.6.1.4.1.3582.2.2.3.2.1.1`
physAdapterIDThe Adapter ID for this Instance of Adapter/Device Instance.ro INTEGER `.1.3.6.1.4.1.3582.2.2.3.2.1.2`	INTEGER	`.1.3.6.1.4.1.3582.2.2.3.2.1.2`
targetIDSCSI Target ID at which this Device is present.ro INTEGER `.1.3.6.1.4.1.3582.2.2.3.2.1.3`	INTEGER	`.1.3.6.1.4.1.3582.2.2.3.2.1.3`
busBUS at which this Device is present.ro INTEGER `.1.3.6.1.4.1.3582.2.2.3.2.1.4`	INTEGER	`.1.3.6.1.4.1.3582.2.2.3.2.1.4`
lunLogical Unit ID at which this Device is present.ro INTEGER `.1.3.6.1.4.1.3582.2.2.3.2.1.5`	INTEGER	`.1.3.6.1.4.1.3582.2.2.3.2.1.5`
logicalDriveNumberLogical drive where this Device is present. -1 in case it is not part of any LD.ro INTEGER `.1.3.6.1.4.1.3582.2.2.3.2.1.6`	INTEGER	`.1.3.6.1.4.1.3582.2.2.3.2.1.6`
stateCurrent State of this Device.ro Enumeration `.1.3.6.1.4.1.3582.2.2.3.2.1.7`	Enumeration	`.1.3.6.1.4.1.3582.2.2.3.2.1.7`
sizeMBActual Size of this Device in Mega Byte(1024*1024 bytes).ro INTEGER `.1.3.6.1.4.1.3582.2.2.3.2.1.8`	INTEGER	`.1.3.6.1.4.1.3582.2.2.3.2.1.8`
deviceTypeType of this Device.ro Enumeration `.1.3.6.1.4.1.3582.2.2.3.2.1.9`	Enumeration	`.1.3.6.1.4.1.3582.2.2.3.2.1.9`
scsiLevelANSI SCSI Level Conformance of this Device.ro Enumeration `.1.3.6.1.4.1.3582.2.2.3.2.1.10`	Enumeration	`.1.3.6.1.4.1.3582.2.2.3.2.1.10`
rebuildProgressRebuild Progress(% Completed) for this Physical Drive if the Physical Drive State is Rebuild.ro DisplayString `.1.3.6.1.4.1.3582.2.2.3.2.1.11`	DisplayString	`.1.3.6.1.4.1.3582.2.2.3.2.1.11`
errorCountNo of errors occurred on this Drive Since it was Configured. This is applicable if the physical disk is part of a Logical drivero INTEGER `.1.3.6.1.4.1.3582.2.2.3.2.1.12`	INTEGER	`.1.3.6.1.4.1.3582.2.2.3.2.1.12`
transferSpeedData transfer rate.ro Enumeration `.1.3.6.1.4.1.3582.2.2.3.2.1.13`	Enumeration	`.1.3.6.1.4.1.3582.2.2.3.2.1.13`
transferWidthData transfer width.ro Enumeration `.1.3.6.1.4.1.3582.2.2.3.2.1.14`	Enumeration	`.1.3.6.1.4.1.3582.2.2.3.2.1.14`
vendorVendor Identification of the device.ro DisplayString `.1.3.6.1.4.1.3582.2.2.3.2.1.15`	DisplayString	`.1.3.6.1.4.1.3582.2.2.3.2.1.15`
productIDProduct Identification of the device.ro DisplayString `.1.3.6.1.4.1.3582.2.2.3.2.1.16`	DisplayString	`.1.3.6.1.4.1.3582.2.2.3.2.1.16`
productRevProduct Revision Level of the device.ro DisplayString `.1.3.6.1.4.1.3582.2.2.3.2.1.17`	DisplayString	`.1.3.6.1.4.1.3582.2.2.3.2.1.17`
physSpIDSpare pool membership ID. If not a member then it will be -1.ro INTEGER `.1.3.6.1.4.1.3582.2.2.3.2.1.18`	INTEGER	`.1.3.6.1.4.1.3582.2.2.3.2.1.18`
lsiSparePool OBJECT IDENTIFIER `.1.3.6.1.4.1.3582.2.2.4`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.3582.2.2.4`
spNumberThe present number of rows in the device table.ro Gauge `.1.3.6.1.4.1.3582.2.2.4.1`	Gauge	`.1.3.6.1.4.1.3582.2.2.4.1`
sparepoolTableA List of Spare Pool Entries containing Information about the sparepools in the System. SEQUENCE OF SparepoolEntry `.1.3.6.1.4.1.3582.2.2.4.2`	SEQUENCE OF SparepoolEntry	`.1.3.6.1.4.1.3582.2.2.4.2`
sparepoolEntryAn Entry in the SparePool Table. SparepoolEntry `.1.3.6.1.4.1.3582.2.2.4.2.1`	SparepoolEntry	`.1.3.6.1.4.1.3582.2.2.4.2.1`
spIDThe unique Sparepool IDro INTEGER `.1.3.6.1.4.1.3582.2.2.4.2.1.1`	INTEGER	`.1.3.6.1.4.1.3582.2.2.4.2.1.1`
ldIDsThe Logical Drive ID(s) where this pool is associated.ro DisplayString `.1.3.6.1.4.1.3582.2.2.4.2.1.2`	DisplayString	`.1.3.6.1.4.1.3582.2.2.4.2.1.2`
noPhyDrvsThe number of drives attached to this pool.ro INTEGER `.1.3.6.1.4.1.3582.2.2.4.2.1.3`	INTEGER	`.1.3.6.1.4.1.3582.2.2.4.2.1.3`
drvIDsThe physical Drive ID(s) which are associated with this sparepool.ro DisplayString `.1.3.6.1.4.1.3582.2.2.4.2.1.4`	DisplayString	`.1.3.6.1.4.1.3582.2.2.4.2.1.4`
raidTraps OBJECT IDENTIFIER `.1.3.6.1.4.1.3582.2.2.5`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.3582.2.2.5`
rtConfigUpdatedAdapter-%d: A New Configuration has been written. TRAP-TYPE `.1.3.6.1.4.1.3582.2.2.5.0.9001`	TRAP-TYPE	`.1.3.6.1.4.1.3582.2.2.5.0.9001`
rtPhysicalDriveStateChangeAdapter-%d, Target-%d: Drive State Changed from %s to %s. TRAP-TYPE `.1.3.6.1.4.1.3582.2.2.5.0.9002`	TRAP-TYPE	`.1.3.6.1.4.1.3582.2.2.5.0.9002`
rtLogicalDriveStateChangeAdapter-%d, Logical Drive-%d: State Changed from %s to %s. TRAP-TYPE `.1.3.6.1.4.1.3582.2.2.5.0.9003`	TRAP-TYPE	`.1.3.6.1.4.1.3582.2.2.5.0.9003`
rtResyncStartedAdapter-%d, Logical Drive-%d: Resynchronization Started. TRAP-TYPE `.1.3.6.1.4.1.3582.2.2.5.0.9004`	TRAP-TYPE	`.1.3.6.1.4.1.3582.2.2.5.0.9004`
rtResyncCompletedAdapter-%d, Logical Drive-%d: Resynchronization Completed Successfully. TRAP-TYPE `.1.3.6.1.4.1.3582.2.2.5.0.9005`	TRAP-TYPE	`.1.3.6.1.4.1.3582.2.2.5.0.9005`
rtNewDriveInsertedAdapter-%d, Target-%d: New Device Inserted. TRAP-TYPE `.1.3.6.1.4.1.3582.2.2.5.0.9006`	TRAP-TYPE	`.1.3.6.1.4.1.3582.2.2.5.0.9006`
rtDeviceFailedAdapter-%d, Target-%d: Device Removed/Failed. TRAP-TYPE `.1.3.6.1.4.1.3582.2.2.5.0.9007`	TRAP-TYPE	`.1.3.6.1.4.1.3582.2.2.5.0.9007`
rtAdapterNumberAdapter ID for which Trap is generated.ro INTEGER `.1.3.6.1.4.1.3582.2.2.5.1001`	INTEGER	`.1.3.6.1.4.1.3582.2.2.5.1001`
rtLogicalDriveNumberLogical Drive Number for which Trap is generated.ro INTEGER `.1.3.6.1.4.1.3582.2.2.5.1002`	INTEGER	`.1.3.6.1.4.1.3582.2.2.5.1002`
rtTargetIDDevice ID of the Physical Drive for which Trap is Generated.ro INTEGER `.1.3.6.1.4.1.3582.2.2.5.1003`	INTEGER	`.1.3.6.1.4.1.3582.2.2.5.1003`
rtOldDriveStateOld State of Logical/Physical Drive, when a State Change Trap is Generated.ro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.3582.2.2.5.1004`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.3582.2.2.5.1004`
rtNewDriveStateNew State of Logical/Physical Drive, when a State Change Trap is Generated.ro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.3582.2.2.5.1005`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.3582.2.2.5.1005`
rtSenseKeyCheck Condition Sense-Key reported by Physical Drive for which Trap is Generated.ro INTEGER `.1.3.6.1.4.1.3582.2.2.5.1006`	INTEGER	`.1.3.6.1.4.1.3582.2.2.5.1006`
rtASCCheck Condition Additional Sense Code (ASC) reported by Physical Drive for which Trap is Generated.ro INTEGER `.1.3.6.1.4.1.3582.2.2.5.1007`	INTEGER	`.1.3.6.1.4.1.3582.2.2.5.1007`
rtASCQCheck Condition Additional Sense Code Qualifier (ASCQ) reported by Physical Drive for which Trap is Generated.ro INTEGER `.1.3.6.1.4.1.3582.2.2.5.1008`	INTEGER	`.1.3.6.1.4.1.3582.2.2.5.1008`
rtLUNLUN for which Trap is Generated.ro INTEGER `.1.3.6.1.4.1.3582.2.2.5.1009`	INTEGER	`.1.3.6.1.4.1.3582.2.2.5.1009`
rtProductProduct name for which Trap is Generated.ro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.3582.2.2.5.1010`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.3582.2.2.5.1010`
rtVendorVendor name for which Trap is Generated.ro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.3582.2.2.5.1011`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.3582.2.2.5.1011`
rtSMARTSense information for which Trap is Generated.ro INTEGER `.1.3.6.1.4.1.3582.2.2.5.1012`	INTEGER	`.1.3.6.1.4.1.3582.2.2.5.1012`
rtOldDriveStatusOld Status of LogicalDrive, when a Status Change Trap is Generated.ro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.3582.2.2.5.1013`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.3582.2.2.5.1013`
rtNewDriveStatusNew Status of Logical Drive, when a Status Change Trap is Generated.ro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.3582.2.2.5.1014`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.3582.2.2.5.1014`
versionInfo OBJECT IDENTIFIER `.1.3.6.1.4.1.3582.2.2.6`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.3582.2.2.6`
mibRevMajorThe major revision level of the MIBro INTEGER `.1.3.6.1.4.1.3582.2.2.6.1`	INTEGER	`.1.3.6.1.4.1.3582.2.2.6.1`
mibRevMinorThe minor revision level of the MIBro INTEGER `.1.3.6.1.4.1.3582.2.2.6.2`	INTEGER	`.1.3.6.1.4.1.3582.2.2.6.2`
agentModuleNameThe module namero DisplayString `.1.3.6.1.4.1.3582.2.2.6.3`	DisplayString	`.1.3.6.1.4.1.3582.2.2.6.3`
agentModuleVersionThe module version in xx.yy.zz format. Where xx is the major version number and yy is the minor version number and zz is the release version number.ro DisplayString `.1.3.6.1.4.1.3582.2.2.6.4`	DisplayString	`.1.3.6.1.4.1.3582.2.2.6.4`
releaseDateModule Release Datero DisplayString `.1.3.6.1.4.1.3582.2.2.6.5`	DisplayString	`.1.3.6.1.4.1.3582.2.2.6.5`