AXIS-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for AXIS-MIB.
224
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
224 total| Object Name |
|---|
axis OBJECT IDENTIFIER .1.3.6.1.4.1.368 |
trapPrinterA printer error has occurred. TRAP-TYPE .1.3.6.1.4.1.368.0.1 |
trapNewIPaddrThe IP address has been changed by RARP or an 'arp -s'. TRAP-TYPE .1.3.6.1.4.1.368.0.2 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.368.1 |
nps OBJECT IDENTIFIER .1.3.6.1.4.1.368.1.1 |
print-server OBJECT IDENTIFIER .1.3.6.1.4.1.368.2 |
status OBJECT IDENTIFIER .1.3.6.1.4.1.368.2.1 |
ports OBJECT IDENTIFIER .1.3.6.1.4.1.368.2.1.1 |
portNumberThe number of ports.ro INTEGER .1.3.6.1.4.1.368.2.1.1.1 |
portTable SEQUENCE OF PortEntry .1.3.6.1.4.1.368.2.1.1.2 |
portEntry PortEntry .1.3.6.1.4.1.368.2.1.1.2.1 |
portIndexThe port's number.ro INTEGER .1.3.6.1.4.1.368.2.1.1.2.1.1 |
portDescrThe port descriptor, name and type.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.1.1.2.1.2 |
portOnLineThe port's On-Line status.ro Enumeration .1.3.6.1.4.1.368.2.1.1.2.1.3 |
portBusyThe port's Busy status.ro Enumeration .1.3.6.1.4.1.368.2.1.1.2.1.4 |
portEndOfFormsThe port's End-of-Forms status.ro Enumeration .1.3.6.1.4.1.368.2.1.1.2.1.5 |
portFaultThe port's Fault status.ro Enumeration .1.3.6.1.4.1.368.2.1.1.2.1.6 |
portOutputBytesThe number of bytes sent out on the port during
a printout in progress or the last printout.ro Counter .1.3.6.1.4.1.368.2.1.1.2.1.7 |
portInputBytesThe number of bytes received on the port during
a printout in progress or the last printout.ro Counter .1.3.6.1.4.1.368.2.1.1.2.1.8 |
portPrintoutsThe number of printouts started on the port.ro Counter .1.3.6.1.4.1.368.2.1.1.2.1.9 |
portAvailableIf the port is assigned for a printout.ro Enumeration .1.3.6.1.4.1.368.2.1.1.2.1.10 |
portIsInputIf the port is assigned as an input port (bidirectional).ro Enumeration .1.3.6.1.4.1.368.2.1.1.2.1.11 |
admin OBJECT IDENTIFIER .1.3.6.1.4.1.368.2.2 |
adminUnitStatusThe units's operational status.
A other than (1) will reset the unit.rw Enumeration .1.3.6.1.4.1.368.2.2.1 |
adminConfigStatusThe units's configuration status.
read-only values:
(1) reserved for future use.
(2) reserved for future use.
write-only values :
(3) will load permanent values .
(4) will save current configuration permanently.
(5) load default configuration.rw Enumeration .1.3.6.1.4.1.368.2.2.2 |
adminOldIntAddrThe Internet Address at power-on or before change by
RARP or 'arp -s'.ro IpAddress .1.3.6.1.4.1.368.2.2.3 |
setup OBJECT IDENTIFIER .1.3.6.1.4.1.368.2.3 |
config OBJECT IDENTIFIER .1.3.6.1.4.1.368.2.3.1 |
ethAddrThe Ethernet Address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.1.2 |
rootPwdThe Root Password.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.1.7 |
usersThe User Defintions.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.1.8 |
hpJetadminHP JetAdmin Support.rw Enumeration .1.3.6.1.4.1.368.2.3.1.13 |
axisPrintSystemThe AXIS Print System enable switch.rw Enumeration .1.3.6.1.4.1.368.2.3.1.15 |
baseUrlThe base URL.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.1.17 |
tcpip OBJECT IDENTIFIER .1.3.6.1.4.1.368.2.3.2 |
intAddrThe Internet Address.rw IpAddress .1.3.6.1.4.1.368.2.3.2.1 |
defRoutThe Default Router.rw IpAddress .1.3.6.1.4.1.368.2.3.2.3 |
netMaskThe Net Mask.rw IpAddress .1.3.6.1.4.1.368.2.3.2.4 |
tcpEnbThe TCP protocol stack enable switch.rw Enumeration .1.3.6.1.4.1.368.2.3.2.5 |
tcpKeyThe TCP protocol stack enable software key.rw OCTET STRING .1.3.6.1.4.1.368.2.3.2.6 |
prosPwdThe PROS password.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.2.9 |
prosPrtThe PROS TCP Port.rw INTEGER .1.3.6.1.4.1.368.2.3.2.11 |
lpdBannerThe LPD banner page switch.rw Enumeration .1.3.6.1.4.1.368.2.3.2.12 |
rtnOptThe Reverse Telnet option handling switch.rw Enumeration .1.3.6.1.4.1.368.2.3.2.18 |
rTelPr1The TCP port for reverse Telnet to logical printer 1.rw INTEGER .1.3.6.1.4.1.368.2.3.2.601 |
rTelPr2The TCP port for reverse Telnet to logical printer 2.rw INTEGER .1.3.6.1.4.1.368.2.3.2.602 |
rTelPr3The TCP port for reverse Telnet to logical printer 3.rw INTEGER .1.3.6.1.4.1.368.2.3.2.603 |
rTelPr4The TCP port for reverse Telnet to logical printer 4.rw INTEGER .1.3.6.1.4.1.368.2.3.2.604 |
rTelPr5The TCP port for reverse Telnet to logical printer 5.rw INTEGER .1.3.6.1.4.1.368.2.3.2.605 |
rTelPr6The TCP port for reverse Telnet to logical printer 6.rw INTEGER .1.3.6.1.4.1.368.2.3.2.606 |
rTelPr7The TCP port for reverse Telnet to logical printer 7.rw INTEGER .1.3.6.1.4.1.368.2.3.2.607 |
rTelPr8The TCP port for reverse Telnet to logical printer 8.rw INTEGER .1.3.6.1.4.1.368.2.3.2.608 |
dnsEnbThe DNS on/off switch.rw Enumeration .1.3.6.1.4.1.368.2.3.2.670 |
dnsPrimaryAddrThe Primary DNS Server Address.rw IpAddress .1.3.6.1.4.1.368.2.3.2.671 |
dnsSecondaryAddrThe Secondary DNS Server Address.rw IpAddress .1.3.6.1.4.1.368.2.3.2.672 |
ipDomainThe Domain Name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.2.673 |
slpScopeListThe SLP Scope List.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.2.680 |
winsEnbThe WINS on/off switch.rw Enumeration .1.3.6.1.4.1.368.2.3.2.692 |
winsPrimaryAddrThe Primary WINS Server Address.rw IpAddress .1.3.6.1.4.1.368.2.3.2.693 |
winsSecondaryAddrThe Secondary WINS Server Address.rw IpAddress .1.3.6.1.4.1.368.2.3.2.694 |
nbtScopeIdThe NBT Scope ID.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.2.695 |
dhcpEnbThe dhcp on/off switch.rw Enumeration .1.3.6.1.4.1.368.2.3.2.696 |
bootpEnbThe bootp on/off switch.rw Enumeration .1.3.6.1.4.1.368.2.3.2.698 |
rarpEnbThe rarp on/off switch.rw Enumeration .1.3.6.1.4.1.368.2.3.2.699 |
snmpcontrol OBJECT IDENTIFIER .1.3.6.1.4.1.368.2.3.3 |
readCommunityThe community having read-only access to all
objects except WriteCommunity.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.3.701 |
writeCommunityThe community having full access to all objects.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.3.702 |
trapAddressThe IP address to send traps to. No traps if set to 0.0.0.0 .rw IpAddress .1.3.6.1.4.1.368.2.3.3.705 |
trapCommunityThe community used when sending traps.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.3.706 |
enableAuthenTrapsSame as snmpEnableAuthenTraps in MIB-II.rw Enumeration .1.3.6.1.4.1.368.2.3.3.715 |
enablePrinterTrapsEnables the enterprise specific 'trapPrinter' traps.rw Enumeration .1.3.6.1.4.1.368.2.3.3.716 |
netware OBJECT IDENTIFIER .1.3.6.1.4.1.368.2.3.4 |
netwEnbThe NetWare protocol stack enable switch.rw Enumeration .1.3.6.1.4.1.368.2.3.4.400 |
psNameThe NetWare print server name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.4.401 |
confServThe NetWare configuration file server name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.4.402 |
psPollThe NetWare print server poll time.rw INTEGER .1.3.6.1.4.1.368.2.3.4.405 |
autoScanDetermines scanning mode of print server.rw Enumeration .1.3.6.1.4.1.368.2.3.4.406 |
fr-802-3The 802.3 frame support switch for NetWare.rw Enumeration .1.3.6.1.4.1.368.2.3.4.420 |
fr-eth-2The Ethernet-2 frame support switch for NetWare.rw Enumeration .1.3.6.1.4.1.368.2.3.4.421 |
fr-802-2The 802.2 frame support switch for NetWare.rw Enumeration .1.3.6.1.4.1.368.2.3.4.422 |
fr-snapThe SNAP frame support switch for NetWare.rw Enumeration .1.3.6.1.4.1.368.2.3.4.423 |
login1File server, print queue and logical printer def. .rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.4.432 |
login2File server, print queue and logical printer def. .rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.4.433 |
login3File server, print queue and logical printer def. .rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.4.434 |
login4File server, print queue and logical printer def. .rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.4.435 |
login5File server, print queue and logical printer def. .rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.4.436 |
login6File server, print queue and logical printer def. .rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.4.437 |
login7File server, print queue and logical printer def. .rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.4.438 |
login8File server, print queue and logical printer def. .rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.4.439 |
login9File server, print queue and logical printer def. .rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.4.440 |
login10File server, print queue and logical printer def. .rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.4.441 |
login11File server, print queue and logical printer def. .rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.4.442 |
login12File server, print queue and logical printer def. .rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.4.443 |
login13File server, print queue and logical printer def. .rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.4.444 |
login14File server, print queue and logical printer def. .rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.4.445 |
login15File server, print queue and logical printer def. .rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.4.446 |
login16File server, print queue and logical printer def. .rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.4.447 |
rprinter1Pserver name and printer number on pserver.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.4.470 |
rprinter2Pserver name and printer number on pserver.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.4.471 |
rprinter3Pserver name and printer number on pserver.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.4.472 |
rprinter4Pserver name and printer number on pserver.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.4.473 |
rprinter5Pserver name and printer number on pserver.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.4.474 |
rprinter6Pserver name and printer number on pserver.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.4.475 |
rprinter7Pserver name and printer number on pserver.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.4.476 |
rprinter8Pserver name and printer number on pserver.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.4.477 |
lservlmgr OBJECT IDENTIFIER .1.3.6.1.4.1.368.2.3.5 |
lslmEnbThe Lan Serv/Lan Mgr protocol stack enable switch.rw Enumeration .1.3.6.1.4.1.368.2.3.5.800 |
lslmFrameTypeDetermines which frame type to use.rw Enumeration .1.3.6.1.4.1.368.2.3.5.801 |
lPrint1The Lan Serv/Lan Mgr printer 1 name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.5.810 |
lLogic1The Lan Serv/Lan Mgr printer 1's logical printer.rw Enumeration .1.3.6.1.4.1.368.2.3.5.811 |
lPrint2The Lan Serv/Lan Mgr printer 1 name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.5.820 |
lLogic2The Lan Serv/Lan Mgr printer 1's logical printer.rw Enumeration .1.3.6.1.4.1.368.2.3.5.821 |
lPrint3The Lan Serv/Lan Mgr printer 3 name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.5.830 |
lLogic3The Lan Serv/Lan Mgr printer 3's logical printer.rw Enumeration .1.3.6.1.4.1.368.2.3.5.831 |
lPrint4The Lan Serv/Lan Mgr printer 4 name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.5.840 |
lLogic4The Lan Serv/Lan Mgr printer 4's logical printer.rw Enumeration .1.3.6.1.4.1.368.2.3.5.841 |
lPrint5The Lan Serv/Lan Mgr printer 5 name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.5.850 |
lLogic5The Lan Serv/Lan Mgr printer 5's logical printer.rw Enumeration .1.3.6.1.4.1.368.2.3.5.851 |
lPrint6The Lan Serv/Lan Mgr printer 6 name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.5.860 |
lLogic6The Lan Serv/Lan Mgr printer 6's logical printer.rw Enumeration .1.3.6.1.4.1.368.2.3.5.861 |
lPrint7The Lan Serv/Lan Mgr printer 7 name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.5.870 |
lLogic7The Lan Serv/Lan Mgr printer 7's logical printer.rw Enumeration .1.3.6.1.4.1.368.2.3.5.871 |
lPrint8The Lan Serv/Lan Mgr printer 8 name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.5.880 |
lLogic8The Lan Serv/Lan Mgr printer 8's logical printer.rw Enumeration .1.3.6.1.4.1.368.2.3.5.881 |
apple OBJECT IDENTIFIER .1.3.6.1.4.1.368.2.3.6 |
atlkEnbThe AppleTalk protocol stack enable switch.rw Enumeration .1.3.6.1.4.1.368.2.3.6.500 |
atlkKeyThe AppleTalk protocol stack software key.rw OCTET STRING .1.3.6.1.4.1.368.2.3.6.501 |
atlkZoneThe AppleTalk zone name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.6.502 |
atlkHPZonerEnable/Disable support for HP Zoner.rw Enumeration .1.3.6.1.4.1.368.2.3.6.503 |
atlkFontHow to respond to a FontListQuery.rw Enumeration .1.3.6.1.4.1.368.2.3.6.504 |
atlkBinarySupport binary files or not.rw Enumeration .1.3.6.1.4.1.368.2.3.6.505 |
atlkBinaryTypeSpecifies which Binary Communications Protocol to use.rw Enumeration .1.3.6.1.4.1.368.2.3.6.506 |
aPrint1The AppleTalk printer 1 name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.6.510 |
aType1The AppleTalk printer 1 type.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.6.511 |
aLogic1The AppleTalk printer 1's logical printer.rw Enumeration .1.3.6.1.4.1.368.2.3.6.512 |
aBinaryType1Specifies which Binary Communications Protocol to use
for AppleTalk printer 1.rw Enumeration .1.3.6.1.4.1.368.2.3.6.513 |
aPrint2The AppleTalk printer 2 name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.6.520 |
aType2The AppleTalk printer 2 type.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.6.521 |
aLogic2The AppleTalk printer 2's logical printer.rw Enumeration .1.3.6.1.4.1.368.2.3.6.522 |
aBinaryType2Specifies which Binary Communications Protocol to use
for AppleTalk printer 2.rw Enumeration .1.3.6.1.4.1.368.2.3.6.523 |
aPrint3The AppleTalk printer 3 name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.6.530 |
aType3The AppleTalk printer 3 type.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.6.531 |
aLogic3The AppleTalk printer 3's logical printer.rw Enumeration .1.3.6.1.4.1.368.2.3.6.532 |
aBinaryType3Specifies which Binary Communications Protocol to use
for AppleTalk printer 3.rw Enumeration .1.3.6.1.4.1.368.2.3.6.533 |
logicals OBJECT IDENTIFIER .1.3.6.1.4.1.368.2.3.7 |
logPrNumberThe number of logical printers.ro INTEGER .1.3.6.1.4.1.368.2.3.7.1 |
logPrTable SEQUENCE OF LogPrEntry .1.3.6.1.4.1.368.2.3.7.2 |
logPrEntry LogPrEntry .1.3.6.1.4.1.368.2.3.7.2.1 |
logPrIndexThe logical printer's number.ro INTEGER .1.3.6.1.4.1.368.2.3.7.2.1.1 |
logPrOutThe logical printer's output port.rw Enumeration .1.3.6.1.4.1.368.2.3.7.2.1.2 |
logPrScndThe logical printer's secondary output port.rw Enumeration .1.3.6.1.4.1.368.2.3.7.2.1.3 |
logPrWaitThe logical printer's wait for printer available switch.rw Enumeration .1.3.6.1.4.1.368.2.3.7.2.1.4 |
logPrInThe logical printer's input port. If set to auto,
the Print Server will try to use the port specified
as output port for both output and input.rw Enumeration .1.3.6.1.4.1.368.2.3.7.2.1.5 |
logPrBefThe logical printer's string-before-job.rw OCTET STRING .1.3.6.1.4.1.368.2.3.7.2.1.7 |
logPrStrThe logical printer's string-to-string substitution defs.rw OCTET STRING .1.3.6.1.4.1.368.2.3.7.2.1.8 |
logPrCsetThe logical printer's character set conversion table.rw Enumeration .1.3.6.1.4.1.368.2.3.7.2.1.10 |
logPrFiltThe logical printer's data stream filter.rw Enumeration .1.3.6.1.4.1.368.2.3.7.2.1.11 |
logPrAftThe logical printer's string-after-job.rw OCTET STRING .1.3.6.1.4.1.368.2.3.7.2.1.12 |
logPrDumpThe logical printer's hexdump filter.rw Enumeration .1.3.6.1.4.1.368.2.3.7.2.1.14 |
logPrSizeThe logical printer's ASCII-to-PostScript conversion page size.rw Enumeration .1.3.6.1.4.1.368.2.3.7.2.1.17 |
logPrOrntThe logical printer's ASCII-to-PostScript conversion
page orientation.rw Enumeration .1.3.6.1.4.1.368.2.3.7.2.1.18 |
logPrFormThe logical printer's ASCII-to-PostScript conversion
page format.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.7.2.1.19 |
logPrFontThe logical printer's PostScript font.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.7.2.1.20 |
output OBJECT IDENTIFIER .1.3.6.1.4.1.368.2.3.8 |
centrLPT1The LPT1 port speed.rw Enumeration .1.3.6.1.4.1.368.2.3.8.20 |
bsyTimLPT1The LPT1 busy time-out.rw INTEGER .1.3.6.1.4.1.368.2.3.8.21 |
mgmInfoLPT1Get management information on LPT1.rw Enumeration .1.3.6.1.4.1.368.2.3.8.22 |
comLPT1Printer comment for printer on LPT1.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.8.23 |
bidirLPT1LPT1 bidirectional control.rw Enumeration .1.3.6.1.4.1.368.2.3.8.24 |
readTimCOM1The COM1 input time-out.rw INTEGER .1.3.6.1.4.1.368.2.3.8.27 |
handshCOM1The COM1 handshake mode.rw Enumeration .1.3.6.1.4.1.368.2.3.8.29 |
baudrCOM1The COM1 baudrate.
The settings b57600 and b115200 are not
valid for all products, please refer to the
corresponding User Manual.rw Enumeration .1.3.6.1.4.1.368.2.3.8.30 |
stopBitsCOM1The COM1 no of stopbits.rw Enumeration .1.3.6.1.4.1.368.2.3.8.31 |
parityCOM1The COM1 no of parity bits.rw Enumeration .1.3.6.1.4.1.368.2.3.8.32 |
noBitsCOM1The COM1 no of bits.rw Enumeration .1.3.6.1.4.1.368.2.3.8.33 |
bsyTimCOM1The COM1 busy time-out.rw INTEGER .1.3.6.1.4.1.368.2.3.8.34 |
mgmInfoCOM1Get management information on COM1.rw Enumeration .1.3.6.1.4.1.368.2.3.8.35 |
comCOM1Printer comment for printer on COM1.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.8.36 |
centrLPT2The LPT2 port speed.rw Enumeration .1.3.6.1.4.1.368.2.3.8.40 |
bsyTimLPT2The LPT2 busy time-out.rw INTEGER .1.3.6.1.4.1.368.2.3.8.41 |
mgmInfoLPT2Get management information on LPT2.rw Enumeration .1.3.6.1.4.1.368.2.3.8.42 |
comLPT2Printer comment for printer on LPT2.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.8.43 |
bidirLPT2LPT2 bidirectional control.rw Enumeration .1.3.6.1.4.1.368.2.3.8.44 |
panel OBJECT IDENTIFIER .1.3.6.1.4.1.368.2.3.9 |
defOutThe default logical printer.rw Enumeration .1.3.6.1.4.1.368.2.3.9.60 |
nds-netware OBJECT IDENTIFIER .1.3.6.1.4.1.368.2.3.10 |
nds-netwEnbThe NetWare protocol stack enable switch.rw Enumeration .1.3.6.1.4.1.368.2.3.10.900 |
nds-psNameThe print server name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.10.901 |
nds-netwProtThe NetWare protocol switch.rw Enumeration .1.3.6.1.4.1.368.2.3.10.902 |
nds-fr-802-3The 802.3 frame support switch for NetWare.rw Enumeration .1.3.6.1.4.1.368.2.3.10.910 |
nds-fr-eth-2The Ethernet-2 frame support switch for NetWare.rw Enumeration .1.3.6.1.4.1.368.2.3.10.911 |
nds-fr-802-2The 802.2 frame support switch for NetWare.rw Enumeration .1.3.6.1.4.1.368.2.3.10.912 |
nds-fr-snapThe SNAP frame support switch for NetWare.rw Enumeration .1.3.6.1.4.1.368.2.3.10.913 |
jobCheckDelayPrint queue polling interval.rw INTEGER .1.3.6.1.4.1.368.2.3.10.920 |
confCheckDelayConfiguration scanning interval.rw INTEGER .1.3.6.1.4.1.368.2.3.10.921 |
pserverNDSInitial file server and NDS print server name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.10.926 |
pserverBindery1Bindery file server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.10.930 |
pserverBindery2Bindery file server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.10.931 |
pserverBindery3Bindery file server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.10.932 |
pserverBindery4Bindery file server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.10.933 |
pserverBindery5Bindery file server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.10.934 |
pserverBindery6Bindery file server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.10.935 |
pserverBindery7Bindery file server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.10.936 |
pserverBindery8Bindery file server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.10.937 |
pserverBindery9Bindery file server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.10.938 |
pserverBindery10Bindery file server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.10.939 |
pserverBindery11Bindery file server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.10.940 |
pserverBindery12Bindery file server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.10.941 |
pserverBindery13Bindery file server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.10.942 |
pserverBindery14Bindery file server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.10.943 |
pserverBindery15Bindery file server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.10.944 |
pserverBindery16Bindery file server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.10.945 |
nprinter1Pserver name and slot number on pserver.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.10.970 |
nprinter2Pserver name and slot number on pserver.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.10.971 |
nprinter3Pserver name and slot number on pserver.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.10.972 |
nprinter4Pserver name and slot number on pserver.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.10.973 |
nprinter5Pserver name and slot number on pserver.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.10.974 |
nprinter6Pserver name and slot number on pserver.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.10.975 |
nprinter7Pserver name and slot number on pserver.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.10.976 |
nprinter8Pserver name and slot number on pserver.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.368.2.3.10.977 |
mib-2 OBJECT IDENTIFIER .1.3.6.1.4.1.727.7.2.1 |
snmp OBJECT IDENTIFIER .1.3.6.1.4.1.727.7.2.1.11 |
coldStartA coldStart trap signifies that the sending
protocol entity is reinitializing itself such
that the agent's configuration or the protocol
entity implementation may be altered. TRAP-TYPE .1.3.6.1.4.1.727.7.2.1.11.0.0 |
authenticationFailureAn authenticationFailure trap signifies that
the sending protocol entity is the addressee
of a protocol message that is not properly
authenticated. While implementations of the
SNMP must be capable of generating this trap,
they must also be capable of suppressing the
emission of such traps via an implementation-
specific mechanism. TRAP-TYPE .1.3.6.1.4.1.727.7.2.1.11.0.4 |