AX2000R
AI MIB Summary
Standard SNMP MIB module defining data structures for AX2000R.
637
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
637 total| Object Name |
|---|
alaxala OBJECT IDENTIFIER .1.3.6.1.4.1.21839 |
RFC1253-MIB Unknown .1.3.6.1.4.1.21839 |
alaxalaProductId OBJECT IDENTIFIER .1.3.6.1.4.1.21839.1 |
axRouter OBJECT IDENTIFIER .1.3.6.1.4.1.21839.1.1 |
ax2000r OBJECT IDENTIFIER .1.3.6.1.4.1.21839.1.1.4 |
ax2000rSystemMsgTrapSystem message is displayed. TRAP-TYPE .1.3.6.1.4.1.21839.1.1.4.0.1 |
ax2000rStandbySystemUpTrapStandby system is restarted. TRAP-TYPE .1.3.6.1.4.1.21839.1.1.4.0.2 |
ax2000rStandbySystemDownTrapStandby system is failed. TRAP-TYPE .1.3.6.1.4.1.21839.1.1.4.0.3 |
ax2000rTemperatureTrapA ax2000rTemperatureTrap is sent if the
temperature measured at a given testpoint is outside
the normal range for the testpoint (i.e. is at the warning,
critical, or shutdown stage). TRAP-TYPE .1.3.6.1.4.1.21839.1.1.4.0.4 |
ax2000rAtmPVcTrapA notification indicating that one or more PVPLs or PVCLs on
this interface has failed since the last axrAtmPVcFailuresTrap was
sent. If this trap has not been sent for the last
axrAtmIntfPVcNotificationInterval, then it will be sent on the next
increment of axrAtmIntfPVcFailures. TRAP-TYPE .1.3.6.1.4.1.21839.1.1.4.0.5 |
alaxalaMib OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2 |
axrEx OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.1 |
axrMib OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.1.1 |
axrStats OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.1.1.1 |
axrPhysStats OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.1.1.1.1 |
axrPhysStatsTableA table containing statistics for physical and time slots layer
interface. SEQUENCE OF AxrPhysStatsTableEntry .1.3.6.1.4.1.21839.2.1.1.1.1.1 |
axrPhysStatsEntryAn entry containing the physical and time slots layer statistics
for a particular interface. AxrPhysStatsTableEntry .1.3.6.1.4.1.21839.2.1.1.1.1.1.1 |
axrPhysStatsIfIndexThe value of this object identifies the physical layer interface
or the time slot layer interface for WAN. INTEGER .1.3.6.1.4.1.21839.2.1.1.1.1.1.1.1 |
axrPhysStatsIfDescrA textual string containing information about the interface.
Same as ifDescr (MIB II).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.1.1.1.1.1.1.2 |
axrPhysStatsIfTypeThe hardware type of physical interfaces.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.1.1.1.1.3 |
axrPhysStatsInFCSsNumber of FCS error frames that received.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.1.1.1.4 |
axrPhysStatsInAbortsNumber of abort frames that received.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.1.1.1.5 |
axrPhysStatsOverrunThe number of times that overrun error occurred on receiving time.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.1.1.1.6 |
axrPhysStatsUnderrunNumber of that a transmission underrun errors occurred.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.1.1.1.7 |
axrPhysStatsInOddbitsNumber of odd bit frames that received.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.1.1.1.8 |
axrPhysStatsInShortfrmsNumber of short frames that received.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.1.1.1.9 |
axrPhysStatsSendTimeoutNumber of times that a transmission timeout ocurred.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.1.1.1.10 |
axrAtmVcStats OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.1.1.1.2 |
axrAtmVcStatsTableA table containing statistics for Virtual Channel Link (VCL). SEQUENCE OF AxrAtmVcStatsTableEntry .1.3.6.1.4.1.21839.2.1.1.1.2.1 |
axrAtmVcStatsEntryAn entry containing the VCL statistics for a particular ATM
interface. AxrAtmVcStatsTableEntry .1.3.6.1.4.1.21839.2.1.1.1.2.1.1 |
axrAtmVcStatsIfIndexThe value of this object identifies for an ATM interface.
This object has the same value as the ifIndex object. INTEGER .1.3.6.1.4.1.21839.2.1.1.1.2.1.1.1 |
axrAtmVcStatsVclVpiThe VPI value of the VCL. INTEGER .1.3.6.1.4.1.21839.2.1.1.1.2.1.1.2 |
axrAtmVcStatsVclVciThe VCI value of the VCL. INTEGER .1.3.6.1.4.1.21839.2.1.1.1.2.1.1.3 |
axrAtmVcStatsInCellsThe number of cells that received on this VC.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.2.1.1.4 |
axrAtmVcStatsInDiscardsThe number of cells which have been dropped by the VCL due to lack of
output queue.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.2.1.1.5 |
axrAtmVcStatsOutCellsThe number of cells that transmitted on this VCL.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.2.1.1.6 |
axrAtmVcStatsOutDiscardsThe number of cells which have been dropped by the VCL due to input
queue.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.2.1.1.7 |
axrAtmVcStatsInPktsThe total number of packets received on this VCL.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.2.1.1.8 |
axrAtmVcStatsInDiscPktsThe number of inbound packets which were chosen to be discarded.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.2.1.1.9 |
axrAtmVcStatsInOctetsThe total number of octets received on this VCL.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.2.1.1.10 |
axrAtmVcStatsOutPktsThe total number of packets transmitted out of this VCL.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.2.1.1.11 |
axrAtmVcStatsOutDiscPktsThe number of outbound packets which were chosen to be discarded.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.2.1.1.12 |
axrAtmVcStatsOutOctetsThe total number of octets transmitted out of this VCL.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.2.1.1.13 |
axrAtmVcStatsIfDescrInterface name of this VC, and description.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.1.1.1.2.1.1.14 |
axrAtmVcStatsIfSpeedThe maximum transmitting bandwidth of VCL.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.1.2.1.1.15 |
axrAtmInterfaceExtTableThis table contains ATM interface configuration and monitoring
information not defined in the atmInterfaceConfTable from the
ATM-MIB. This includes the type of connection setup procedures,
ILMI information, and information on the VPI/VCI range. SEQUENCE OF AxrAtmInterfaceExtTableEntry .1.3.6.1.4.1.21839.2.1.1.1.2.2 |
axrAtmInterfaceExtEntryAn entry extends the atmInterfaceConfEntry defined in the ATM-
MIB. Each entry corresponds to an ATM interface. AxrAtmInterfaceExtTableEntry .1.3.6.1.4.1.21839.2.1.1.1.2.2.1 |
axrAtmIntfPVcIfIndexThe value of this object identifies for an ATM interface.
This object has the same value as the ifIndex object. INTEGER .1.3.6.1.4.1.21839.2.1.1.1.2.2.1.1 |
axrAtmIntfPVcFailuresThe number of times the operational status of a PVPL or PVCL on
this interface has gone down.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.2.2.1.2 |
axrAtmIntfCurrentlyFailingPVclsThe current number of VCLs on this interface for which there is
an active row.ro Gauge .1.3.6.1.4.1.21839.2.1.1.1.2.2.1.3 |
axrAtmIntfPVcFailuresTrapEnableAllows the generation of traps in response to PVCL or PVPL
failures on this interface.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.1.2.2.1.4 |
axrAtmIntfPVcTrapIntervalThe minimum interval between the sending of
axrAtmPVcTrap notifications for this interface.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.1.2.2.1.5 |
axrAtmPVcFailingTableA table containing statistics for Virtual Channel Link (VCL). SEQUENCE OF AxrAtmPVcFailingTableEntry .1.3.6.1.4.1.21839.2.1.1.1.2.3 |
axrAtmPVcFailingEntryAn entry containing the VCL statistics for a particular ATM
interface. AxrAtmPVcFailingTableEntry .1.3.6.1.4.1.21839.2.1.1.1.2.3.1 |
axrAtmPVcFailingIfIndexThe value of this object identifies for an ATM interface.
This object has the same value as the ifIndex object. INTEGER .1.3.6.1.4.1.21839.2.1.1.1.2.3.1.1 |
axrAtmPVcFailingVclVpiThe VPI value of the VCL. INTEGER .1.3.6.1.4.1.21839.2.1.1.1.2.3.1.2 |
axrAtmPVcFailingVclVciThe VCI value of the VCL. INTEGER .1.3.6.1.4.1.21839.2.1.1.1.2.3.1.3 |
axrAtmPVcFailingCurrentlyTimeStampThe time at which this PVCL began to fail currently.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.21839.2.1.1.1.2.3.1.4 |
axrAtmPVcFailingPreviouslyTimeStampThe time at which this PVCL began to fail previously.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.21839.2.1.1.1.2.3.1.5 |
axrSonetStats OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.1.1.1.3 |
axrSonetSectionStatsTableA table containing SONET section statistics for sonet interfaces. SEQUENCE OF AxrSonetSectionStatsTableEntry .1.3.6.1.4.1.21839.2.1.1.1.3.1 |
axrSonetSectionStatsEntryAn entry containing SONET section statistics for sonet interfaces. AxrSonetSectionStatsTableEntry .1.3.6.1.4.1.21839.2.1.1.1.3.1.1 |
axrSonetSectionStatsIfIndexThe value of this object identifies for a SONET interface.
This object has the same value as the ifIndex object. INTEGER .1.3.6.1.4.1.21839.2.1.1.1.3.1.1.1 |
axrSonetSectionStatsLOSNumber of times LOS(Loss Of Signal).ro Counter .1.3.6.1.4.1.21839.2.1.1.1.3.1.1.2 |
axrSonetSectionStatsLOFNumber of times LOF(Loss Of Frame).An LOF defect is declared
when OOF(Out of Frame) defect persists for a period of 3 milliseconds.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.3.1.1.3 |
axrSonetSectionStatsOOFThis object count when out of synchronous.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.3.1.1.4 |
axrSonetSectionStatsBIP8Number of times S-BIP8(Bit Interleaved Parity 8) Error.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.3.1.1.5 |
axrSonetLineStatsTableA table containing line statistics for sonet interfaces. SEQUENCE OF AxrSonetLineStatsTableEntry .1.3.6.1.4.1.21839.2.1.1.1.3.2 |
axrSonetLineStatsEntryAn entry containing line statistics for sonet interfaces. AxrSonetLineStatsTableEntry .1.3.6.1.4.1.21839.2.1.1.1.3.2.1 |
axrSonetLineStatsIfIndexThe value of this object identifies for a sonet interface.
This object has the same value as the ifIndex object. INTEGER .1.3.6.1.4.1.21839.2.1.1.1.3.2.1.1 |
axrSonetLineStatsAISNumber of Line L-AIS(Alarm Indication Signal) that received
at sonet interface.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.3.2.1.2 |
axrSonetLineStatsRDINumber of L-RDI(Remote Defect Indication) errors that received
on the sonet interface.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.3.2.1.3 |
axrSonetLineStatsBIP24Number of L-BIP24(Bit Interleaved Parity 24) errors on the sonet
interface.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.3.2.1.4 |
axrSonetLineStatsFEBENumber of L-FEBE(Line Far End Block Error) that received on the sonet
interface.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.3.2.1.5 |
axrSonetPathStatsTableA table containing Path statistics for SONET interface. SEQUENCE OF AxrSonetPathStatsTableEntry .1.3.6.1.4.1.21839.2.1.1.1.3.3 |
axrSonetPathStatsEntryAn entry containing Path statistics for SONET interface. AxrSonetPathStatsTableEntry .1.3.6.1.4.1.21839.2.1.1.1.3.3.1 |
axrSonetPathStatsIfIndexThe IfIndex value of interface that use SONET. INTEGER .1.3.6.1.4.1.21839.2.1.1.1.3.3.1.1 |
axrSonetPathStatsLOPNumber of LOP(Loss Of Pointer) errors that received on the sonet
interface.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.3.3.1.2 |
axrSonetPathStatsAISNumber of P-AIS(Alarm Indication Signal) that received on the sonet
interface.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.3.3.1.3 |
axrSonetPathStatsRDINumber of P-RDI(Path Remote Defect Indication) that received
on the sonet interface.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.3.3.1.4 |
axrSonetPathStatsBIP8Number of P-BIP8(Bit Interleaved Parity 8) errors that received
on the sonet interface.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.3.3.1.5 |
axrSonetPathStatsFEBENumber of P-FEBE(Far End Block Error) errors that received
on the sonet interface.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.3.3.1.6 |
axrIfStats OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.1.1.1.4 |
axrIfStatsTableA table containing extension statistics for more than 100,000,000
bps interface. SEQUENCE OF AxrIfStatsTableEntry .1.3.6.1.4.1.21839.2.1.1.1.4.1 |
axrIfStatsEntryAn entry containing extension statistics for interface. AxrIfStatsTableEntry .1.3.6.1.4.1.21839.2.1.1.1.4.1.1 |
axrIfStatsIndexThis object value is same as Ifindex which interface index
of a system. INTEGER .1.3.6.1.4.1.21839.2.1.1.1.4.1.1.1 |
axrIfStatsNameInterfaces name. Same as ifDescr.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.1.1.1.4.1.1.2 |
axrIfStatsInMegaOctetsNumber of octets that received on the interface. This value is
displayed in mega-octets(M). Value of 0 through 999,999 are rounded
down.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.4.1.1.3 |
axrIfStatsInUcastMegaPktsNumber of subnetwork-unicast packets that received on the interface.
This value is displayed in mega-packets(M).Value of 0 through 999,999
are rounded down.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.4.1.1.4 |
axrIfStatsInMulticastMegaPktsNumber of multicast mega-packets that received on the interface.
this value is displayed in mega-packets(M).Value of 0 through 999,999
are rounded down.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.4.1.1.5 |
axrIfStatsInBroadcastMegaPktsThe number of non-unicast packets delivered to a higher-layer
protocol. The value is displayed in mega-packets (M). Value of 0
through 999,999 are rounded down.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.4.1.1.6 |
axrIfStatsOutMegaOctetsThe total number of octets transmitted out of the interface.
The value is displayed in mega-octets(M). Value of 0 through 999,999
are rounded down.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.4.1.1.7 |
axrIfStatsOutUcastMegaPktsThe total number of packets that higher-level protocols requested
be transmitted to a subnetwork-unicast address.The value is displayed
in mega packets(M). Value of 0 through 999,999 are rounded down.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.4.1.1.8 |
axrIfStatsOutMulticastMegaPktsNumber of multicast packets that transmitted on the interface.
This value is displayed in mega-packets(M). Value of 0 through
999,999 are rounded down.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.4.1.1.9 |
axrIfStatsOutBroadcastMegaPktsNumber of broadcast packets that transmitted on the interface.
This value is displayed in mega-packets(M). Value of 0 through
999,999 are rounded down.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.4.1.1.10 |
axrIfStatsHighSpeedA circuit speed.This value is displayed in mega-bps[Mbps].
Round off the 1,000,000bps.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.4.1.1.11 |
axrAtm25MStats OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.1.1.1.5 |
axrAtm25MStatsTableStatistical information table on 25 Mega ATM interface. SEQUENCE OF AxrAtm25MStatsTableEntry .1.3.6.1.4.1.21839.2.1.1.1.5.1 |
axrAtm25MStatsEntryAn entry containing error statistics for a particular
25 Mega ATM interface. AxrAtm25MStatsTableEntry .1.3.6.1.4.1.21839.2.1.1.1.5.1.1 |
axrAtm25MStatsIndexA ifIndex value of 25 Mega ATM interface. INTEGER .1.3.6.1.4.1.21839.2.1.1.1.5.1.1.1 |
axrAtm25MStSymbolErrNumber of times symbol error.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.5.1.1.2 |
axrAtm25MStLOSNumber of times LOS(Loss Of Signal).ro Counter .1.3.6.1.4.1.21839.2.1.1.1.5.1.1.3 |
axrQoS OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.1.1.1.6 |
axrEtherTxQoS OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.1.1.1.6.1 |
axrEtherTxQoSStatsTableA collection of QoS statistics kept for a particular
Ethernet interface. SEQUENCE OF AxrEtherTxQoSStatsEntry .1.3.6.1.4.1.21839.2.1.1.1.6.1.1 |
axrEtherTxQoSStatsEntryAn entry containing QoS statistics for a particular
Ethernet interface. AxrEtherTxQoSStatsEntry .1.3.6.1.4.1.21839.2.1.1.1.6.1.1.1 |
axrEtherTxQoSStatsIndexIdentified by a particular value of this
index is same value of ifIndex.Its value ranges
between 1 and the value of ifNumber. INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.1.1.1.1 |
axrEtherTxQoSStatsMaxQnumMax length of queue for an ethernet interface.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.1.1.1.2 |
axrEtherTxQoSStatsLimitQlenThe limit length of outband queue for an ethernet interface.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.1.1.1.3 |
axrEtherTxQoSStatsTotalOutFramesThe total number of packets transmitted out of the
interface.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.6.1.1.1.4 |
axrEtherTxQoSStatsTotalOutBytesHighThe total number of octets transmitted out of the
interface.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.6.1.1.1.5 |
axrEtherTxQoSStatsTotalOutBytesLowThe total number of octets transmitted out of the
interface.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.6.1.1.1.6 |
axrEtherTxQoSStatsTotalDiscardFramesThe number of outbound packets which were chosen
to be discarded .ro Counter .1.3.6.1.4.1.21839.2.1.1.1.6.1.1.1.7 |
axrEtherTxQoSStatsQueueTableA collection of priority queue statistics. SEQUENCE OF AxrEtherTxQoSStatsQueueEntry .1.3.6.1.4.1.21839.2.1.1.1.6.1.2 |
axrEtherTxQoSStatsQueueEntryA entry of priority queue statistics. AxrEtherTxQoSStatsQueueEntry .1.3.6.1.4.1.21839.2.1.1.1.6.1.2.1 |
axrEtherTxQoSStatsQueueIndexIdentified by a particular value of this
index is same value of ifIndex.Its value ranges
between 1 and the value of ifNumber. INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.1.2.1.1 |
axrEtherTxQoSStatsQueueQueIndexAn index that uniquely identifies the particular
queue.Its value ranges between 1 and the value of
axrEtherTxQoSStatsMaxQnum. INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.1.2.1.2 |
axrEtherTxQoSStatsQueueQlenA length of outbound priority queue for a interface.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.1.2.1.3 |
axrEtherTxQoSStatsQueueMaxQlenMax length of outband priority queue for a interface since
system was up.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.1.2.1.4 |
axrPPPTxQoS OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.1.1.1.6.2 |
axrPPPTxQoSStatsTableA collection of QoS statistics kept for a particular
PPP interface. SEQUENCE OF AxrPPPTxQoSStatsEntry .1.3.6.1.4.1.21839.2.1.1.1.6.2.1 |
axrPPPTxQoSStatsEntryAn entry containing QoS statistics for a particular
PPP interface. AxrPPPTxQoSStatsEntry .1.3.6.1.4.1.21839.2.1.1.1.6.2.1.1 |
axrPPPTxQoSStatsIndexIdentified by a particular value of this
index is same value of ifIndex.Its value ranges
between 1 and the value of ifNumber. INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.2.1.1.1 |
axrPPPTxQoSStatsMaxQnumMax length of queue for a PPP interface.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.2.1.1.2 |
axrPPPTxQoSStatsLimitQlenThe limit length of outband queue for a PPP interface.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.2.1.1.3 |
axrPPPTxQoSStatsTotalOutFramesThe total number of packets transmitted out of the
PPP interface.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.6.2.1.1.4 |
axrPPPTxQoSStatsTotalOutBytesHighThe total number of octets transmitted out of the
PPP interface.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.6.2.1.1.5 |
axrPPPTxQoSStatsTotalOutBytesLowThe total number of octets transmitted out of the
PPP interface.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.6.2.1.1.6 |
axrPPPTxQoSStatsTotalDiscardFramesThe number of outbound packets which were chosen
to be discarded .ro Counter .1.3.6.1.4.1.21839.2.1.1.1.6.2.1.1.7 |
axrPPPTxQoSStatsQueueTableA collection of outbound priority queue statistics
for a PPP interface. SEQUENCE OF AxrPPPTxQoSStatsQueueEntry .1.3.6.1.4.1.21839.2.1.1.1.6.2.2 |
axrPPPTxQoSStatsQueueEntryA entry of outbound priority queue statistics.
for a PPP interface. AxrPPPTxQoSStatsQueueEntry .1.3.6.1.4.1.21839.2.1.1.1.6.2.2.1 |
axrPPPTxQoSStatsQueueIndexIdentified by a particular value of this
index is same value of ifIndex.Its value ranges
between 1 and the value of ifNumber. INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.2.2.1.1 |
axrPPPTxQoSStatsQueueQueIndexAn index that uniquely identifies the particular
queue.Its value ranges between 1 and the value of
axrPPPTxQoSStatsMaxQnum. INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.2.2.1.2 |
axrPPPTxQoSStatsQueueQlenA length of outbound priority queue for a PPP
interface.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.2.2.1.3 |
axrPPPTxQoSStatsQueueMaxQlenMax length of outband priority queue for a interface since
system was up.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.2.2.1.4 |
axrPPPTxQoSStatsQueueOutFramesThe total number of packets transmitted out of the
PPP priority queue interface.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.6.2.2.1.5 |
axrPPPTxQoSStatsQueueOutBytesHighThe total number of octets transmitted out of the
PPP priority queue interface.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.6.2.2.1.6 |
axrPPPTxQoSStatsQueueOutBytesLowThe total number of octets transmitted out of the
PPP priority queue interface.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.6.2.2.1.7 |
axrPPPTxQoSStatsQueueDiscardFramesThe number of outbound packets which were chosen
to be discarded at PPP priority queue interface.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.6.2.2.1.8 |
axrFRTxQoS OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.1.1.1.6.3 |
axrFRTxQoSStatsTableA collection of QoS statistics kept for a particular
Frame Relay interface. SEQUENCE OF AxrFRTxQoSStatsEntry .1.3.6.1.4.1.21839.2.1.1.1.6.3.1 |
axrFRTxQoSStatsEntryAn entry containing QoS statistics for a particular
Frame Relay interface. AxrFRTxQoSStatsEntry --SHIMO EDIT .1.3.6.1.4.1.21839.2.1.1.1.6.3.1.1 |
axrFRTxQoSStatsIndexIdentified by a particular value of this
index is same value of ifIndex.Its value ranges
between 1 and the value of ifNumber. INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.3.1.1.1 |
axrFRTxQoSStatsMaxQnumMax length of queue for a Frame Relay interface.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.3.1.1.2 |
axrFRTxQoSStatsLimitQlenThe limit length of outband queue for a Frame Relay interface.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.3.1.1.3 |
axrFRTxQoSStatsTotalOutFramesThe total number of octets transmitted out of the
Frame Relay interface.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.6.3.1.1.4 |
axrFRTxQoSStatsTotalOutBytesHighThe total number of octets transmitted out of the
PFrame Relay interface.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.6.3.1.1.5 |
axrFRTxQoSStatsTotalOutBytesLowThe total number of octets transmitted out of the
PFrame Relay interface.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.6.3.1.1.6 |
axrFRTxQoSStatsTotalDiscardFramesThe number of outbound packets which were chosen
to be discarded .ro Counter .1.3.6.1.4.1.21839.2.1.1.1.6.3.1.1.7 |
axrFRTxQoSStatsQueueTableA collection of outbound priority queue statistics
for a Frame Relay interface. SEQUENCE OF AxrFRTxQoSStatsQueueEntry .1.3.6.1.4.1.21839.2.1.1.1.6.3.2 |
axrFRTxQoSStatsQueueEntryA entry of outbound priority queue statistics.
for a Farme Relay interface. AxrFRTxQoSStatsQueueEntry .1.3.6.1.4.1.21839.2.1.1.1.6.3.2.1 |
axrFRTxQoSStatsQueueIndexIdentified by a particular value of this
index is same value of ifIndex.Its value ranges
between 1 and the value of ifNumber. INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.3.2.1.1 |
axrFRTxQoSStatsQueueQueIndexAn index that uniquely identifies the particular
queue.Its value ranges between 1 and the value of
axrFRTxQoSStatsMaxQnum INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.3.2.1.2 |
axrFRTxQoSStatsQueueQlenA length of outbound priority queue for a Frame Relay
interface.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.3.2.1.3 |
axrFRTxQoSStatsQueueMaxQlenMax length of outband priority queue for a Frame Relay
interface since system was up.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.3.2.1.4 |
axrFRTxQoSStatsQueueOutFramesThe total number of octets transmitted out of the
Frame Relay priority queue interface.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.6.3.2.1.5 |
axrFRTxQoSStatsQueueOutBytesHighThe total number of octets transmitted out of the
Frame Relay priority queue interface.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.6.3.2.1.6 |
axrFRTxQoSStatsQueueOutBytesLowThe total number of octets transmitted out of the
Frame Relay interface.ro Counter .1.3.6.1.4.1.21839.2.1.1.1.6.3.2.1.7 |
axrFRTxQoSStatsQueueDiscardFramesThe number of outbound packets which were chosen
to be discarded .ro Counter .1.3.6.1.4.1.21839.2.1.1.1.6.3.2.1.8 |
axrEthShaper OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.1.1.1.6.4 |
axrEthShaperStatsTableA collection of Shaper statistics kept for a
particular Ethernet Shaper interface. SEQUENCE OF AxrEthShaperStatsEntry .1.3.6.1.4.1.21839.2.1.1.1.6.4.1 |
axrEthShaperStatsEntryAn entry containing Shaper statistics for a
particular Ethernet Shaper interface. AxrEthShaperStatsEntry .1.3.6.1.4.1.21839.2.1.1.1.6.4.1.1 |
axrEthShaperStatsIndexIdentified by a particular value of this index
is same value of ifIndex.Its value ranges between
1 and the value of ifNumber. INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.4.1.1.1 |
axrEthShaperStatsTotalOutFramesThe total number of packets transmitted out of
the interface.ro Counter64 .1.3.6.1.4.1.21839.2.1.1.1.6.4.1.1.2 |
axrEthShaperStatsTotalOutBytesThe total number of octets transmitted out of
the interface.ro Counter64 .1.3.6.1.4.1.21839.2.1.1.1.6.4.1.1.3 |
axrEthShaperStatsTotalDiscardFramesThe total number of outbound packets which
were chosen to be discarded.ro Counter64 .1.3.6.1.4.1.21839.2.1.1.1.6.4.1.1.4 |
axrEthShaperStatsTotalDiscardBytesThe total number of outbound octets which
were chosen to be discarded.ro Counter64 .1.3.6.1.4.1.21839.2.1.1.1.6.4.1.1.5 |
axrEthShaperStatsQueueTableA collection of priority queue statistics. SEQUENCE OF AxrEthShaperStatsQueueEntry .1.3.6.1.4.1.21839.2.1.1.1.6.4.2 |
axrEthShaperStatsQueueEntryA entry of priority queue statistics. AxrEthShaperStatsQueueEntry .1.3.6.1.4.1.21839.2.1.1.1.6.4.2.1 |
axrEthShaperStatsQueueIndexIdentified by a particular value of this index
is same value of ifIndex.Its value ranges between
1 and the value of ifNumber. INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.4.2.1.1 |
axrEthShaperStatsQueueQueIndexAn index that uniquely identifies the particular queue.
Its value ranges between 1 and 4. INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.4.2.1.2 |
axrEthShaperStatsQueueOutFramesThe number of packets transmitted out of the priority
queue interface.ro Counter64 .1.3.6.1.4.1.21839.2.1.1.1.6.4.2.1.3 |
axrEthShaperStatsQueueOutBytesThe number of octets transmitted out of the priority
queue interface.ro Counter64 .1.3.6.1.4.1.21839.2.1.1.1.6.4.2.1.4 |
axrEthShaperStatsQueueDiscardFramesThe number of packets which were chosen to be discarded.ro Counter64 .1.3.6.1.4.1.21839.2.1.1.1.6.4.2.1.5 |
axrEthShaperStatsQueueDiscardBytesThe number of octets which were chosen to be discarded.ro Counter64 .1.3.6.1.4.1.21839.2.1.1.1.6.4.2.1.6 |
axrEthShaperStatsFlowOtherFrmTableA collection of Shaper other Frame statistics kept
for a particular Ethernet Shaper interface. SEQUENCE OF AxrEthShaperStatsFlowOtherFrmEntry .1.3.6.1.4.1.21839.2.1.1.1.6.4.3 |
axrEthShaperStatsFlowOtherFrmEntryAn entry containing Shaper other Frame statistics
for a particular Ethernet Shaper interface. AxrEthShaperStatsFlowOtherFrmEntry .1.3.6.1.4.1.21839.2.1.1.1.6.4.3.1 |
axrEthShaperStatsFlowOtherFrmNifIndexIdentified by a particular value of this index
is same value of NIF.Its value ranges between
1 and the value of ax2000rNifBoardNumber. INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.4.3.1.1 |
axrEthShaperStatsFlowOtherFrmLineIndexIdentified by a particular value of this index
is same value of Physical Line.Its value ranges
between 1 and the value of ax2000rNifPhysLineNumber. INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.4.3.1.2 |
axrEthShaperStatsFlowOtherFrmOutFramesThe total number of packets transmitted outside of
a target for control out of the NIF.ro Counter64 .1.3.6.1.4.1.21839.2.1.1.1.6.4.3.1.3 |
axrEthShaperStatsFlowOtherFrmOutBytesThe total number of octets transmitted outside of
a target for control out of the NIF.ro Counter64 .1.3.6.1.4.1.21839.2.1.1.1.6.4.3.1.4 |
axrEthShaperStatsFlowOtherFrmDiscardFramesThe total number of outbound packets outside of
a target for control which were chosen to be discarded.ro Counter64 .1.3.6.1.4.1.21839.2.1.1.1.6.4.3.1.5 |
axrEthShaperStatsFlowOtherFrmDiscardBytesThe total number of outbound octets outside of
a target for control which were chosen to be discarded.ro Counter64 .1.3.6.1.4.1.21839.2.1.1.1.6.4.3.1.6 |
axrEthVll OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.1.1.1.6.6 |
axrEthVllStatsTableA collection of Shaper statistics kept for a
particular Ethernet Vll interface. SEQUENCE OF AxrEthVllStatsEntry .1.3.6.1.4.1.21839.2.1.1.1.6.6.1 |
axrEthVllStatsEntryAn entry containing Shaper statistics for a
particular Ethernet Vll interface. AxrEthVllStatsEntry .1.3.6.1.4.1.21839.2.1.1.1.6.6.1.1 |
axrEthVllStatsIndexIdentified by a particular value of this index
is same value of ifIndex.Its value ranges between
1 and the value of ifNumber. INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.6.1.1.1 |
axrEthVllStatsTotalOutFramesThe total number of packets transmitted out of
the interface.ro Counter64 .1.3.6.1.4.1.21839.2.1.1.1.6.6.1.1.2 |
axrEthVllStatsTotalOutBytesThe total number of octets transmitted out of
the interface.ro Counter64 .1.3.6.1.4.1.21839.2.1.1.1.6.6.1.1.3 |
axrEthVllStatsTotalDiscardFramesThe total number of outbound packets which
were chosen to be discarded.ro Counter64 .1.3.6.1.4.1.21839.2.1.1.1.6.6.1.1.4 |
axrEthVllStatsTotalDiscardBytesThe total number of outbound octets which
were chosen to be discarded.ro Counter64 .1.3.6.1.4.1.21839.2.1.1.1.6.6.1.1.5 |
axrEthVllStatsQueueTableA collection of priority queue statistics. SEQUENCE OF AxrEthVllStatsQueueEntry .1.3.6.1.4.1.21839.2.1.1.1.6.6.2 |
axrEthVllStatsQueueEntry AxrEthVllStatsQueueEntry .1.3.6.1.4.1.21839.2.1.1.1.6.6.2.1 |
axrEthVllStatsQueueIndexIdentified by a particular value of this index
is same value of ifIndex.Its value ranges between
1 and the value of ifNumber. INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.6.2.1.1 |
axrEthVllStatsQueueQueIndexAn index that uniquely identifies the particular queue.
Its value ranges between 1 and 4. INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.6.2.1.2 |
axrEthVllStatsQueuelimitQlenThe limit value of the length of the output priority queue
in the interface is indicated.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.6.2.1.3 |
axrEthVllStatsQueueQlenThe length of the output priority queue when information
in the interface is gathered is shown.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.6.2.1.4 |
axrEthVllStatsQueueMaxQlenThe maximum length of the output priority queue
in a pertinent interface is shown.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.1.6.6.2.1.5 |
axrEthVllStatsQueueOutFramesThe number of packets transmitted out of the priority
queue interface.ro Counter64 .1.3.6.1.4.1.21839.2.1.1.1.6.6.2.1.6 |
axrEthVllStatsQueueOutBytesThe number of octets transmitted out of the priority
queue interface.ro Counter64 .1.3.6.1.4.1.21839.2.1.1.1.6.6.2.1.7 |
axrEthVllStatsQueueDiscardFramesThe number of packets which were chosen to be discarded.ro Counter64 .1.3.6.1.4.1.21839.2.1.1.1.6.6.2.1.8 |
axrEthVllStatsQueueDiscardBytesThe number of octets which were chosen to be discarded.ro Counter64 .1.3.6.1.4.1.21839.2.1.1.1.6.6.2.1.9 |
axrDHCP OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.1.1.1.10 |
axrDHCPAddrValueThe number of IP addresses which are available
within this Router.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.1.10.1 |
axrDHCPFreeAddrValueThe number of IP addresses which are available
within this Router. May be expressed as either
an absolute value.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.1.10.2 |
axrOspf OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.1.1.14 |
axrOspfGeneralTableThe table of OSPF information. SEQUENCE OF AxrOspfGeneralEntry .1.3.6.1.4.1.21839.2.1.1.14.1 |
axrOspfGeneralEntryThe entry of OSPF information. AxrOspfGeneralEntry .1.3.6.1.4.1.21839.2.1.1.14.1.1 |
axrOspfGeneralDomainNumberDomain number in the Autonomous System.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.1.1.1 |
axrOspfRouterIdA integer uniquely identifying the router
in the Autonomous System.ro IpAddress .1.3.6.1.4.1.21839.2.1.1.14.1.1.2 |
axrOspfAdminStatThe administrative status of OSPF in the
router.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.14.1.1.3 |
axrOspfVersionNumberThe current version number of the OSPF
protocol is 2.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.1.1.4 |
axrOspfAreaBdrRtrStatusA flag to note whether this router is an area
border router.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.14.1.1.5 |
axrOspfASBdrRtrStatusA flag to note whether this router is configured
as an Autonomous System border router.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.14.1.1.6 |
axrOspfExternLsaCountThe number of external (LS type 5) link-state
advertisements in the link-state database.ro Gauge .1.3.6.1.4.1.21839.2.1.1.14.1.1.7 |
axrOspfExternLsaCksumSumThe 32-bit unsigned sum of the LS checksums of
the external link-state advertisements contained
in the link-state database.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.1.1.8 |
axrOspfTOSSupportThe router's support for type-of-service routing.
This value of false(2).ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.1.1.9 |
axrOspfOriginateNewLsasThe number of new link-state advertisements
that have been originated.ro Counter .1.3.6.1.4.1.21839.2.1.1.14.1.1.10 |
axrOspfRxNewLsasThe number of link-state advertisements received
determined to be new instantiations.ro Counter .1.3.6.1.4.1.21839.2.1.1.14.1.1.11 |
axrOspfExtLsdbLimitThe maximum number of non-default AS-external-LSAs
entries that can be stored in the link-state database.
If the value is -1, then there is no limit.
This value is -1ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.1.1.12 |
axrOspfMulticastExtensionsA Bit Mask indicating whether the router is
forwarding IP multicast (Class D) datagrams
based on the algorithms defined in the Multicast
Extensions to OSPF.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.1.1.13 |
axrOspfAreaTableThe router's support for demand routing. SEQUENCE OF AxrOspfAreaEntry .1.3.6.1.4.1.21839.2.1.1.14.2 |
axrOspfAreaEntryThis entry contain ospf area information. AxrOspfAreaEntry .1.3.6.1.4.1.21839.2.1.1.14.2.1 |
axrOspfAreaDomainNumberAn uniquely identifying number of domain.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.2.1.1 |
axrOspfAreaIdA 32-bit integer uniquely identifying an area.ro IpAddress .1.3.6.1.4.1.21839.2.1.1.14.2.1.2 |
axrOspfAuthTypeThe authentication type specified for an area.ro INTEGER -- none(0), -- simplePassword (1), -- md5(2) .1.3.6.1.4.1.21839.2.1.1.14.2.1.3 |
axrOspfImportAsExternThe area's support for importing AS external
link- state advertisements.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.14.2.1.4 |
axrOspfSpfRunsThe number of times that the intra-area route
table has been calculated using this area's
link-state database.ro Counter .1.3.6.1.4.1.21839.2.1.1.14.2.1.5 |
axrOspfAreaBdrRtrCountThe total number of area border routers reachable
within this area.ro Gauge .1.3.6.1.4.1.21839.2.1.1.14.2.1.6 |
axrOspfAsBdrRtrCountThe total number of AS area border routers reachable
within this area.ro Gauge .1.3.6.1.4.1.21839.2.1.1.14.2.1.7 |
axrOspfAreaLsaCountThe total number of LSA(link-state advertisements)
in this area. Excluding AS External LSA'sro Gauge .1.3.6.1.4.1.21839.2.1.1.14.2.1.8 |
axrOspfAreaLsaCksumSumThe sum of LSA's LS checksums contained in this
area's link-state database.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.2.1.9 |
axrOspfAreaSummaryhe variable axrOspfAreaSummary controls the import
of summary LSAs into stub areas. Value is only
sendAreaSummary(2).ro Enumeration .1.3.6.1.4.1.21839.2.1.1.14.2.1.10 |
axrOspfAreaStatusThis variable displays the status of the entry.
Value is only valid(1).ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.2.1.11 |
axrOspfStubAreaTableThe set of metrics that will be advertised by
a default Area Border Router into a stub area. SEQUENCE OF AxrOspfStubAreaEntry .1.3.6.1.4.1.21839.2.1.1.14.3 |
axrOspfStubAreaEntryThe metric for a given Type of Service that
will be advertised by a default Area Border Router
into a stub area. AxrOspfStubAreaEntry .1.3.6.1.4.1.21839.2.1.1.14.3.1 |
axrOspfStubDomainNumberThe domain identifier for the Stub Area.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.3.1.1 |
axrOspfStubAreaIdThe identifier for the Stub Area.ro IpAddress .1.3.6.1.4.1.21839.2.1.1.14.3.1.2 |
axrOspfStubTOSThe Type of Service associated with the metric.
Value is only 0.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.3.1.3 |
axrOspfStubMetricThe metric value applied at the indicated type
of service.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.3.1.4 |
axrOspfStubStatusThis variable displays the status of the entry.
This value is only valid(1).ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.3.1.5 |
axrOspfStubMetricTypehis variable displays the type of metric advertised
as a default route.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.14.3.1.6 |
axrOspfLsdbTableThe OSPF Process's Link State Database. SEQUENCE OF AxrOspfLsdbEntry .1.3.6.1.4.1.21839.2.1.1.14.4 |
axrOspfLsdbEntryA single Link State Advertisement. AxrOspfLsdbEntry .1.3.6.1.4.1.21839.2.1.1.14.4.1 |
axrOspfLsdbDomainNumberThe identifier of the domain from which
the LSA was received.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.4.1.1 |
axrOspfLsdbAreaIdThe 32 bit identifier of the Area from which
the LSA was received.ro IpAddress .1.3.6.1.4.1.21839.2.1.1.14.4.1.2 |
axrOspfLsdbTypeThe type of the link state advertisement.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.14.4.1.3 |
axrOspfLsdbLsidThe Link State ID . It identifies the piece of the routing
domain that is being described by the advertisement.ro IpAddress .1.3.6.1.4.1.21839.2.1.1.14.4.1.4 |
axrOspfLsdbRouterIdThe number that uniquely identifies the originating
router in the Autonomous System.ro IpAddress .1.3.6.1.4.1.21839.2.1.1.14.4.1.5 |
axrOspfLsdbSequenceThe sequence number field is a signed 32-bit
integer.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.4.1.6 |
axrOspfLsdbAgeThis the age of the link state adver-
tisement in seconds.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.4.1.7 |
axrOspfLsdbChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.4.1.8 |
axrOspfLsdbAdvertisementThe entire Link State Advertisement, including
its header.ro OCTET STRING .1.3.6.1.4.1.21839.2.1.1.14.4.1.9 |
axrOspfAreaRangeTableA range if IP addresses specified by an IP
address/IP network mask pair. SEQUENCE OF AxrOspfAreaRangeEntry .1.3.6.1.4.1.21839.2.1.1.14.5 |
axrOspfAreaRangeEntryA range if IP addresses specified by an IP
address/IP network mask pair. AxrOspfAreaRangeEntry .1.3.6.1.4.1.21839.2.1.1.14.5.1 |
axrOspfAreaRangeDomainNumberDomain number of the Area.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.5.1.1 |
axrOspfAreaRangeAreaIdThe Area the Address Range is to be found
within.ro IpAddress .1.3.6.1.4.1.21839.2.1.1.14.5.1.2 |
axrOspfAreaRangeNetThe IP Address of the Net or Subnet indicated
by the range.ro IpAddress .1.3.6.1.4.1.21839.2.1.1.14.5.1.3 |
axrOspfAreaRangeMaskThe Subnet Mask that pertains to the Net or
Subnet.ro IpAddress .1.3.6.1.4.1.21839.2.1.1.14.5.1.4 |
axrOspfAreaRangeStatusThis variable displays the status of the entry.
This value is only valid(1).ro Enumeration .1.3.6.1.4.1.21839.2.1.1.14.5.1.5 |
axrOspfAreaRangeEffectSubnets subsumed by ranges either trigger the
advertisement of the indicated summary (adver-
tiseMatching), or result in the subnet's not
being advertised at all outside the area.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.14.5.1.6 |
axrOspfHostTableThe list of Hosts, and their metrics, that the
router will advertise as host routes. SEQUENCE OF AxrOspfHostEntry --SHIMO EDIT .1.3.6.1.4.1.21839.2.1.1.14.6 |
axrOspfHostEntryA metric to be advertised, for a given type of service,
when a given host is reachable. AxrOspfHostEntry --SHIMO EDIT .1.3.6.1.4.1.21839.2.1.1.14.6.1 |
axrOspfHostDomainNumberOSPF domain number of the Host.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.6.1.1 |
axrOspfHostIpAddressThe IP Address of the Host.ro IpAddress .1.3.6.1.4.1.21839.2.1.1.14.6.1.2 |
axrOspfHostTOSThe Type of Service of the route being configured.
This value is only 0.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.6.1.3 |
axrOspfHostMetricThe Metric to be advertised.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.6.1.4 |
axrOspfHostStatusThis variable displays the status of the entry.
Setting it to 'invalid' has the effect of rendering
it inoperative. The internal effect (row removal) is
implementation dependent.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.14.6.1.5 |
axrOspfIfTableThe OSPF Interface Table describes the interfaces
from the viewpoint of OSPF. SEQUENCE OF AxrOspfIfEntry .1.3.6.1.4.1.21839.2.1.1.14.7 |
axrOspfIfEntryThe OSPF Interface Entry describes one interface
from the viewpoint of OSPF. AxrOspfIfEntry .1.3.6.1.4.1.21839.2.1.1.14.7.1 |
axrOspfIfDomainNumberThe domain number of this OSPF interface.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.7.1.1 |
axrOspfIfIpAddressThe IP address of this OSPF interface.ro IpAddress .1.3.6.1.4.1.21839.2.1.1.14.7.1.2 |
axrOspfAddressLessIfFor the purpose of easing the instancing of
addressed and addressless interfaces; This
variable takes the value 0 on interfaces with
IP Addresses, and the corresponding value of
ifIndex for interfaces having no IP Address.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.7.1.3 |
axrOspfIfAreaIdA integer uniquely identifying the area to which
the interface connects.ro IpAddress .1.3.6.1.4.1.21839.2.1.1.14.7.1.4 |
axrOspfIfTypeThe OSPF interface type.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.14.7.1.5 |
axrOspfIfAdminStatThe OSPF interface's administrative status.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.14.7.1.6 |
axrOspfIfRtrPriorityThe priority of this interface.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.7.1.7 |
axrOspfIfTransitDelayThe estimated number of seconds it takes to
transmit a link state update packet over this
interface.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.7.1.8 |
axrOspfIfRetransIntervalThe number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this interface.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.7.1.9 |
axrOspfIfHelloIntervalThe length of time, in seconds, between the
Hello packets that the router sends on the interface.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.7.1.10 |
axrOspfIfRtrDeadIntervalThe number of seconds that a router's Hello
packets have not been seen before it's neighbors
declare the router down.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.7.1.11 |
axrOspfIfPollIntervalThe larger time interval, in seconds, between
the Hello packets sent to an inactive non-
broadcast multi- access neighbor.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.7.1.12 |
axrOspfIfStateThe OSPF Interface State.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.14.7.1.13 |
axrOspfIfDesignatedRouterThe IP Address of the Designated Router.ro IpAddress .1.3.6.1.4.1.21839.2.1.1.14.7.1.14 |
axrOspfIfBackupDesignatedRouterThe IP Address of the Backup Designated Router.ro IpAddress .1.3.6.1.4.1.21839.2.1.1.14.7.1.15 |
axrOspfIfEventsThe number of times this OSPF interface has
changed its state, or an error has occurred.ro Counter .1.3.6.1.4.1.21839.2.1.1.14.7.1.16 |
axrOspfIfAuthKeyThe Authentication Key.ro OCTET STRING .1.3.6.1.4.1.21839.2.1.1.14.7.1.17 |
axrOspfIfStatusThis variable displays the status of the entry.
this value is only valid(1).ro Enumeration .1.3.6.1.4.1.21839.2.1.1.14.7.1.18 |
axrOspfIfMulticastForwardingThe way multicasts should forwarded on this
interface; not forwarded, forwarded as data
link multicasts, or forwarded as data link unicasts.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.14.7.1.19 |
axrOspfIfMetricTableThe TOS metrics for a non-virtual interface identified
by the interface index. SEQUENCE OF AxrOspfIfMetricEntry .1.3.6.1.4.1.21839.2.1.1.14.8 |
axrOspfIfMetricEntryA particular TOS metric for a non-virtual interface
identified by the interface index. AxrOspfIfMetricEntry .1.3.6.1.4.1.21839.2.1.1.14.8.1 |
axrOspfIfMetricDomainNumberThe domain number of this OSPF interface.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.8.1.1 |
axrOspfIfMetricIpAddressThe IP address of this OSPF interface.ro IpAddress .1.3.6.1.4.1.21839.2.1.1.14.8.1.2 |
axrOspfIfMetricAddressLessIfFor the purpose of easing the instancing of
addressed and addressless interfaces; This
variable takes the value 0 on interfaces with
IP Addresses, and the value of ifIndex for in-
terfaces having no IP Address.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.8.1.3 |
axrOspfIfMetricTOSThe type of service metric being referenced.
this value is only 0.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.8.1.4 |
axrOspfIfMetricValueThe metric of using this type of service on
this interface.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.8.1.5 |
axrOspfIfMetricStatusThis variable displays the status of the entry.
This entry status is only valid(1).ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.8.1.6 |
axrOspfVirtIfTableInformation about this router's virtual interfaces. SEQUENCE OF AxrOspfVirtIfEntry .1.3.6.1.4.1.21839.2.1.1.14.9 |
axrOspfVirtIfEntryInformation about a single Virtual Interface. AxrOspfVirtIfEntry .1.3.6.1.4.1.21839.2.1.1.14.9.1 |
axrOspfVirtIfDomainNumberThe domain number for this Virtual Interfacero INTEGER .1.3.6.1.4.1.21839.2.1.1.14.9.1.1 |
axrOspfVirtIfAreaIdThe Transit Area that the Virtual Link traverses.ro IpAddress .1.3.6.1.4.1.21839.2.1.1.14.9.1.2 |
axrOspfVirtIfNeighborThe Router ID of the Virtual Neighbor.ro IpAddress .1.3.6.1.4.1.21839.2.1.1.14.9.1.3 |
axrOspfVirtIfTransitDelayThe estimated number of seconds it takes to
transmit a link- state update packet over this
interface.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.9.1.4 |
axrOspfVirtIfRetransIntervalThe number of seconds between link-state advertisement
retransmissions, for adjacencies belonging to this
interface.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.9.1.5 |
axrOspfVirtIfHelloIntervalThe length of time, in seconds, between the
Hello packets that the router sends on the in-
terface.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.9.1.6 |
axrOspfVirtIfRtrDeadIntervalThe number of seconds that a router's Hello
packets have not been seen before it's neighbors
declare the router down.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.9.1.7 |
axrOspfVirtIfStateOSPF virtual interface states.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.14.9.1.8 |
axrOspfVirtIfEventsThe number of state changes or error events on
this Virtual Linkro Counter .1.3.6.1.4.1.21839.2.1.1.14.9.1.9 |
axrOspfVirtIfAuthKeyAuthentication key of this interface.ro OCTET STRING .1.3.6.1.4.1.21839.2.1.1.14.9.1.10 |
axrOspfVirtIfStatusThis variable displays the status of the entry.
This entry is only valid(1).ro Enumeration .1.3.6.1.4.1.21839.2.1.1.14.9.1.11 |
axrOspfNbrTableA table of non-virtual neighbor information. SEQUENCE OF AxrOspfNbrEntry .1.3.6.1.4.1.21839.2.1.1.14.10 |
axrOspfNbrEntryThe information regarding a single neighbor. AxrOspfNbrEntry .1.3.6.1.4.1.21839.2.1.1.14.10.1 |
axrOspfNbrDomainNumberOSPF domain number of this neighbor.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.10.1.1 |
axrOspfNbrIpAddrThe IP address this neighbor is using in its
IP Source Address.ro IpAddress .1.3.6.1.4.1.21839.2.1.1.14.10.1.2 |
axrOspfNbrAddressLessIndexOn an interface having an IP Address, zero.
On addressless interfaces, the corresponding
value of ifIndex in the Internet Standard MIB.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.10.1.3 |
axrOspfNbrRtrIdThe integer uniquely identifying the neighboring
router in the Autonomous System.ro IpAddress .1.3.6.1.4.1.21839.2.1.1.14.10.1.4 |
axrOspfNbrOptionsA Bit Mask corresponding to the neighbor's op-
tions field.
Bit 0, if set, indicates that the system will
operate on Type of Service metrics other than
TOS 0. If zero, the neighbor will ignore all
metrics except the TOS 0 metric.
Bit 1, if set, indicates that the associated
area accepts and operates on external informa-
tion; if zero, it is a stub area.
Bit 2, if set, indicates that the system is ca-
pable of routing IP Multicast datagrams; i.e.,
that it implements the Multicast Extensions to
OSPF.
Bit 3, if set, indicates that the associated
area is an NSSA. These areas are capable of
carrying type 7 external advertisements, which
are translated into type 5 external advertise-
ments at NSSA borders.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.10.1.5 |
axrOspfNbrPriorityThe priority of this neighbor.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.10.1.6 |
axrOspfNbrStateThe State of the relationship with this Neighbor.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.14.10.1.7 |
axrOspfNbrEventsThe number of times this neighbor relationship
has changed state, or an error has occurred.ro Counter .1.3.6.1.4.1.21839.2.1.1.14.10.1.8 |
axrOspfNbrLsRetransQLenThe current length of the retransmission queue.ro Gauge .1.3.6.1.4.1.21839.2.1.1.14.10.1.9 |
axrOspfNbmaNbrStatusThis variable displays the status of the entry.
This entry value is only valid(1). And enable to response
this entry when axrOspfIfType is nbma.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.10.1.10 |
axrOspfNbmaNbrPermanenceThis variable displays the status of the entry.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.14.10.1.11 |
axrOspfVirtNbrTableA table of virtual neighbor information. SEQUENCE OF AxrOspfVirtNbrEntry .1.3.6.1.4.1.21839.2.1.1.14.11 |
axrOspfVirtNbrEntryVirtual neighbor information. AxrOspfVirtNbrEntry .1.3.6.1.4.1.21839.2.1.1.14.11.1 |
axrOspfVirtNbrDomainNumberThe domain number.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.11.1.1 |
axrOspfVirtNbrAreaThe Transit Area Identifier.ro IpAddress .1.3.6.1.4.1.21839.2.1.1.14.11.1.2 |
axrOspfVirtNbrRtrIdA integer uniquely identifying the neighboring
router in the Autonomous System.ro IpAddress .1.3.6.1.4.1.21839.2.1.1.14.11.1.3 |
axrOspfVirtNbrIpAddrThe IP address this Virtual Neighbor is using.ro IpAddress .1.3.6.1.4.1.21839.2.1.1.14.11.1.4 |
axrOspfVirtNbrOptionsA Bit Mask corresponding to the neighbor's options
field.
Bit 1, if set, indicates that the system will operate
on Type of Service metrics other than TOS 0. If zero,
the neighbor will ignore all metrics except the TOS
0 metric.
Bit 2, if set, indicates that the system is Network
Multicast capable; ie, that it implements OSPF Multicast
Routing.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.11.1.5 |
axrOspfVirtNbrStateThe state of the Virtual Neighbor Relationship.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.14.11.1.6 |
axrOspfVirtNbrEventsThe number of times this virtual link has changed
its state, or an error has occurred.ro Counter .1.3.6.1.4.1.21839.2.1.1.14.11.1.7 |
axrOspfVirtNbrLsRetransQLenThe current length of the retransmission queue.ro Gauge .1.3.6.1.4.1.21839.2.1.1.14.11.1.8 |
axrOspfExtLsdbTableThe OSPF Process's Links State Database. SEQUENCE OF AxrOspfExtLsdbEntry .1.3.6.1.4.1.21839.2.1.1.14.12 |
axrOspfExtLsdbEntryA single Link State Advertisement. AxrOspfExtLsdbEntry .1.3.6.1.4.1.21839.2.1.1.14.12.1 |
axrOspfExtLsdbDomainNumberOSPF domain number.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.12.1.1 |
axrOspfExtLsdbTypeThe type of the link state advertisement.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.14.12.1.2 |
axrOspfExtLsdbLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.ro IpAddress .1.3.6.1.4.1.21839.2.1.1.14.12.1.3 |
axrOspfExtLsdbRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.ro IpAddress .1.3.6.1.4.1.21839.2.1.1.14.12.1.4 |
axrOspfExtLsdbSequenceThe sequence number field is a signed 32-bit integer.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.12.1.5 |
axrOspfExtLsdbAgeThe age of the link state advertisement in seconds.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.12.1.6 |
axrOspfExtLsdbChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.12.1.7 |
axrOspfExtLsdbAdvertisementThe entire Link State Advertisement, including its header.ro OCTET STRING .1.3.6.1.4.1.21839.2.1.1.14.12.1.8 |
axrOspfAreaAggregateTableA range of IP addresses specified by an IP
address/IP network mask pair. SEQUENCE OF AxrOspfAreaAggregateEntry .1.3.6.1.4.1.21839.2.1.1.14.14 |
axrOspfAreaAggregateEntryA range of IP addresses specified by an IP
address/IP network mask pair. AxrOspfAreaAggregateEntry .1.3.6.1.4.1.21839.2.1.1.14.14.1 |
axrOspfAreaAggregateDomainNumberOSPF domain number.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.14.1.1 |
axrOspfAreaAggregateAreaIDThe Area the Address Aggregate is to be found within.ro IpAddress .1.3.6.1.4.1.21839.2.1.1.14.14.1.2 |
axrOspfAreaAggregateLsdbTypeThe type of the Address Aggregate. This field
specifies the Lsdb type that this Address
Aggregate applies to.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.14.14.1.3 |
axrOspfAreaAggregateNetThe IP Address of the Net or Subnet indicated by the range.ro IpAddress .1.3.6.1.4.1.21839.2.1.1.14.14.1.4 |
axrOspfAreaAggregateMaskThe Subnet Mask that pertains to the Net or Subnet.ro IpAddress .1.3.6.1.4.1.21839.2.1.1.14.14.1.5 |
axrOspfAreaAggregateStatusThis variable displays the status of the entry.
This entry value is only valid(1).ro INTEGER .1.3.6.1.4.1.21839.2.1.1.14.14.1.6 |
axrOspfAreaAggregateEffectSubnets subsumed by ranges either trigger the
advertisement of the indicated aggregate (ad-
vertiseMatching), or result in the subnet's not
being advertised at all outside the area.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.14.14.1.7 |
axrOspfv3 OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.1.1.15 |
axrOspfv3GeneralTableThe table which ospfv3 information is stored in. SEQUENCE OF AxrOspfv3GeneralEntry .1.3.6.1.4.1.21839.2.1.1.15.1 |
axrOspfv3GeneralEntryThe list of the ospfv3 information. AxrOspfv3GeneralEntry .1.3.6.1.4.1.21839.2.1.1.15.1.1 |
axrOspfv3GeneralDomainNumberospfv3 domain number.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.15.1.1.1 |
axrOspfv3RouterIdA 32-bit integer uniquely identifying the
router in the Autonomous System.
By convention, to ensure uniqueness, this
should default to the value of one of the
router's IPv4 interface addresses if IPv4 is
configured.ro RouterID .1.3.6.1.4.1.21839.2.1.1.15.1.1.2 |
axrOspfv3AdminStatThe administrative status of axrOspfv3 in the
router. The value 'enabled' denotes that the
axrOspfv3 Process is active on at least one inter-
face; 'disabled' disables it on all inter-
faces.ro Status .1.3.6.1.4.1.21839.2.1.1.15.1.1.3 |
axrOspfv3VersionNumberThe version number of OSPF for IPv6 is 3.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.15.1.1.4 |
axrOspfv3AreaBdrRtrStatusA flag to note whether this router is an area
border router.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.21839.2.1.1.15.1.1.5 |
axrOspfv3ASBdrRtrStatusA flag to note whether this router is config-
ured as an Autonomous System border router.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.21839.2.1.1.15.1.1.6 |
axrOspfv3AsScopeLsaCountThe number of AS-Scope (e.g. AS-External) link-state
advertisements in the link-state database.ro Gauge32 .1.3.6.1.4.1.21839.2.1.1.15.1.1.7 |
axrOspfv3AsScopeLsaCksumSumThe 32-bit unsigned sum of the LS checksums of
the AS-scoped link-state advertisements con-
tained in the link-state database. This sum
can be used to determine if there has been a
change in a router's link state database, and
to compare the link-state database of two
routers.ro Integer32 .1.3.6.1.4.1.21839.2.1.1.15.1.1.8 |
axrOspfv3OriginateNewLsasThe number of new link-state advertisements
that have been originated. This number is in-
cremented each time the router originates a new
LSA.ro Counter32 .1.3.6.1.4.1.21839.2.1.1.15.1.1.9 |
axrOspfv3RxNewLsasThe number of link-state advertisements re-
ceived determined to be new instantiations.
This number does not include newer instantia-
tions of self-originated link-state advertise-
ments.ro Counter32 .1.3.6.1.4.1.21839.2.1.1.15.1.1.10 |
axrOspfv3ExtAreaLsdbLimitThe maximum number of non-default AS-
external-LSAs entries that can be stored in the
link-state database. If the value is -1, then
there is no limit.
When the number of non-default AS-external-LSAs
in a router's link-state database reaches
axrOspfv3ExtAreaLsdbLimit, the router enters Overflow-
State. The router never holds more than
axrOspfv3ExtAreaLsdbLimit non-default AS-external-LSAs
in its database. OspfExtAreaLsdbLimit MUST be set
identically in all routers attached to the axrOspfv3
backbone and/or any regular axrOspfv3 area. (i.e.,
axrOspfv3 stub areas and NSSAs are excluded).ro Integer32 (-1..'7FFFFFFF'h) .1.3.6.1.4.1.21839.2.1.1.15.1.1.11 |
axrOspfv3MulticastExtensionsA Bit Mask indicating whether the router is
forwarding IPv6 multicast datagrams
based on the algorithms defined in the Multi-
cast Extensions to OSPF.
Bit 0, if set, indicates that the router can
forward IPv6 multicast datagrams in the router's
directly attached areas (called intra-area mul-
ticast routing).
Bit 1, if set, indicates that the router can
forward IPv6 multicast datagrams between axrOspfv3
areas (called inter-area multicast routing).
Bit 2, if set, indicates that the router can
forward IPv6 multicast datagrams between Auto-
nomous Systems (called inter-AS multicast rout-
ing).
Only certain combinations of bit settings are
allowed, namely: 0 (no multicast forwarding is
enabled), 1 (intra-area multicasting only), 3
(intra-area and inter-area multicasting), 5
(intra-area and inter-AS multicasting) and 7
(multicasting everywhere). By default, no mul-
ticast forwarding is enabled.ro Integer32 .1.3.6.1.4.1.21839.2.1.1.15.1.1.12 |
axrOspfv3DemandExtensionsThe router's support for demand routing.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.21839.2.1.1.15.1.1.14 |
axrOspfv3TrafficEngineeringSupportThe router's support for traffic engineering
extensions.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.21839.2.1.1.15.1.1.15 |
axrOspfv3AreaTableInformation describing the configured parame-
ters and cumulative statistics of the router's
attached areas. SEQUENCE OF AxrOspfv3AreaEntry .1.3.6.1.4.1.21839.2.1.1.15.2 |
axrOspfv3AreaEntryInformation describing the configured parame-
ters and cumulative statistics of one of the
router's attached areas. AxrOspfv3AreaEntry .1.3.6.1.4.1.21839.2.1.1.15.2.1 |
axrOspfv3AreaDomainNumberospfv3 domain number.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.15.2.1.1 |
axrOspfv3AreaIdA 32-bit integer uniquely identifying an area.
Area ID 0.0.0.0 is used for the axrOspfv3 backbone.ro AreaID .1.3.6.1.4.1.21839.2.1.1.15.2.1.2 |
axrOspfv3ImportAsExternIndicates whether an area is a Stub area, NSSA, or
standard area. AS-scope LSAs are not imported into Stub
Areas or NSSAs. NSSAs import AS-External data as Type-7
LSAs which have Area-scopero Enumeration .1.3.6.1.4.1.21839.2.1.1.15.2.1.3 |
axrOspfv3SpfRunsThe number of times that the intra-area route
table has been calculated using this area's
link-state database. This is typically done
using Dijkstra's algorithm.ro Counter32 .1.3.6.1.4.1.21839.2.1.1.15.2.1.4 |
axrOspfv3AreaBdrRtrCountThe total number of area border routers reach-
able within this area. This is initially zero,
and is calculated in each SPF Pass.ro Gauge32 .1.3.6.1.4.1.21839.2.1.1.15.2.1.5 |
axrOspfv3AsBdrRtrCountThe total number of Autonomous System border
routers reachable within this area. This is
initially zero, and is calculated in each SPF
Pass.ro Gauge32 .1.3.6.1.4.1.21839.2.1.1.15.2.1.6 |
axrOspfv3AreaScopeLsaCountThe total number of Area-Scope link-state
advertisements in this area's link-state
database.ro Gauge32 .1.3.6.1.4.1.21839.2.1.1.15.2.1.7 |
axrOspfv3AreaScopeLsaCksumSumThe 32-bit unsigned sum of the Area-Scope link-state
advertisements' LS checksums contained in this
area's link-state database. The sum can be used
to determine if there has been a change in a
router's link state database, and to compare the
link-state database of two routers.ro Integer32 .1.3.6.1.4.1.21839.2.1.1.15.2.1.8 |
axrOspfv3AreaSummaryThe variable axrOspfv3AreaSummary controls the im-
port of summary LSAs into stub areas. It has
no effect on other areas.
If it is noAreaSummary, the router will neither
originate nor propagate summary LSAs into the
stub area. It will rely entirely on its de-
fault route.
If it is sendAreaSummary, the router will both
summarize and propagate summary LSAs.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.15.2.1.9 |
axrOspfv3AreaStatusThis variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.21839.2.1.1.15.2.1.10 |
axrOspfv3StubMetricThe metric value advertised for the default route
into Stub and NSSA areas.rw BigMetric .1.3.6.1.4.1.21839.2.1.1.15.2.1.11 |
axrOspfv3AsLsdbTableThe axrOspfv3 Process's AS-Scope Link State Database. SEQUENCE OF AxrOspfv3AsLsdbEntry .1.3.6.1.4.1.21839.2.1.1.15.3 |
axrOspfv3AsLsdbEntryA single AS-Scope Link State Advertisement. AxrOspfv3AsLsdbEntry .1.3.6.1.4.1.21839.2.1.1.15.3.1 |
axrOspfv3AsLsdbDomainNumberospfv3 domain number.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.15.3.1.1 |
axrOspfv3AsLsdbTypeThe type of the link state advertisement.
Each link state type has a separate advertise-
ment format. Unrecognized AS-Scope LSAs with the
U-bit set are also store in this database.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.15.3.1.2 |
axrOspfv3AsLsdbRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.ro RouterID .1.3.6.1.4.1.21839.2.1.1.15.3.1.3 |
axrOspfv3AsLsdbLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or a unique identifier;
it identifies the piece of the routing domain
that is being described by the advertisement.
In contrast to OSPF for IPv4, the LSID has no
addressing semantics.ro IpAddress .1.3.6.1.4.1.21839.2.1.1.15.3.1.4 |
axrOspfv3AsLsdbSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement.ro Integer32 .1.3.6.1.4.1.21839.2.1.1.15.3.1.5 |
axrOspfv3AsLsdbAgeThis field is the age of the link state adver-
tisement in seconds.ro Integer32 -- Should be 0..MaxAge .1.3.6.1.4.1.21839.2.1.1.15.3.1.6 |
axrOspfv3AsLsdbChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.21839.2.1.1.15.3.1.7 |
axrOspfv3AsLsdbAdvertisementThe entire Link State Advertisement, including
its header.ro OCTET STRING .1.3.6.1.4.1.21839.2.1.1.15.3.1.8 |
axrOspfv3AreaLsdbTableThe axrOspfv3 Process's Area-Scope Link State Database. SEQUENCE OF AxrOspfv3AreaLsdbEntry .1.3.6.1.4.1.21839.2.1.1.15.4 |
axrOspfv3AreaLsdbEntryA single Area-Scope Link State Advertisement. AxrOspfv3AreaLsdbEntry .1.3.6.1.4.1.21839.2.1.1.15.4.1 |
axrOspfv3AreaLsdbDomainNumberospfv3 domain number.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.15.4.1.1 |
axrOspfv3AreaLsdbAreaIdThe 32 bit identifier of the Area from which the
LSA was received.Ero AreaID .1.3.6.1.4.1.21839.2.1.1.15.4.1.2 |
axrOspfv3AreaLsdbTypeThe type of the link state advertisement.
Each link state type has a separate advertise-
ment format. Unrecognized Area-Scope LSAs with
the U-bit set are also stored in this database.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.15.4.1.3 |
axrOspfv3AreaLsdbRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.ro RouterID .1.3.6.1.4.1.21839.2.1.1.15.4.1.4 |
axrOspfv3AreaLsdbLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or a unique identifier;
it identifies the piece of the routing domain
that is being described by the advertisement.
In contrast to OSPF for IPv4, the LSID has no
addressing semantics.ro IpAddress .1.3.6.1.4.1.21839.2.1.1.15.4.1.5 |
axrOspfv3AreaLsdbSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement.ro Integer32 .1.3.6.1.4.1.21839.2.1.1.15.4.1.6 |
axrOspfv3AreaLsdbAgeThis field is the age of the link state adver-
tisement in seconds.ro Integer32 -- Should be 0..MaxAge .1.3.6.1.4.1.21839.2.1.1.15.4.1.7 |
axrOspfv3AreaLsdbChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.21839.2.1.1.15.4.1.8 |
axrOspfv3AreaLsdbAdvertisementThe entire Link State Advertisement, including
its header.ro OCTET STRING .1.3.6.1.4.1.21839.2.1.1.15.4.1.9 |
axrOspfv3LinkLsdbTableThe axrOspfv3 Process's Link-Scope Link State Database. SEQUENCE OF AxrOspfv3LinkLsdbEntry .1.3.6.1.4.1.21839.2.1.1.15.5 |
axrOspfv3LinkLsdbEntryA single Link-Scope Link State Advertisement. AxrOspfv3LinkLsdbEntry .1.3.6.1.4.1.21839.2.1.1.15.5.1 |
axrOspfv3LinkLsdbDomainNumberospfv3 domain number.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.15.5.1.1 |
axrOspfv3LinkLsdbIfIndexThe identifier of the link from which the LSA
was received.ro Ipv6IfIndex .1.3.6.1.4.1.21839.2.1.1.15.5.1.2 |
axrOspfv3LinkLsdbTypeThe type of the link state advertisement.
Each link state type has a separate advertise-
ment format. Unrecognized Link-Scope LSAs with
the U-bit set are also stored in this database.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.15.5.1.3 |
axrOspfv3LinkLsdbRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.ro RouterID .1.3.6.1.4.1.21839.2.1.1.15.5.1.4 |
axrOspfv3LinkLsdbLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or a unique identifier;
it identifies the piece of the routing domain
that is being described by the advertisement.
In contrast to OSPF for IPv4, the LSID has no
addressing semantics.ro IpAddress .1.3.6.1.4.1.21839.2.1.1.15.5.1.5 |
axrOspfv3LinkLsdbSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement.ro Integer32 .1.3.6.1.4.1.21839.2.1.1.15.5.1.6 |
axrOspfv3LinkLsdbAgeThis field is the age of the link state adver-
tisement in seconds.ro Integer32 -- Should be 0..MaxAge .1.3.6.1.4.1.21839.2.1.1.15.5.1.7 |
axrOspfv3LinkLsdbChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.21839.2.1.1.15.5.1.8 |
axrOspfv3LinkLsdbAdvertisementThe entire Link State Advertisement, including
its header.ro OCTET STRING .1.3.6.1.4.1.21839.2.1.1.15.5.1.9 |
axrOspfv3IfTableThe axrOspfv3 Interface Table describes the inter-
faces from the viewpoint of axrOspfv3. SEQUENCE OF AxrOspfv3IfEntry .1.3.6.1.4.1.21839.2.1.1.15.7 |
axrOspfv3IfEntryThe axrOspfv3 Interface Entry describes one inter-
face from the viewpoint of axrOspfv3. AxrOspfv3IfEntry .1.3.6.1.4.1.21839.2.1.1.15.7.1 |
axrOspfv3IfDomainNumberospfv3 domain number.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.15.7.1.1 |
axrOspfv3IfIndexThe interface index of this axrOspfv3 interface.
It corresponds to the interface index of the
Ipv6 interface on which axrOspfv3 is configured.ro Ipv6IfIndex .1.3.6.1.4.1.21839.2.1.1.15.7.1.2 |
axrOspfv3IfAreaIdA 32-bit integer uniquely identifying the area
to which the interface connects. Area ID
0.0.0.0 is used for the axrOspfv3 backbone.ro AreaID .1.3.6.1.4.1.21839.2.1.1.15.7.1.3 |
axrOspfv3IfTypeThe axrOspfv3 interface type.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.15.7.1.4 |
axrOspfv3IfAdminStatThe axrOspfv3 interface's administrative status.
The value formed on the interface, and the in-
terface will be advertised as an internal route
to some area. The value 'disabled' denotes
that the interface is external to axrOspfv3.ro Status .1.3.6.1.4.1.21839.2.1.1.15.7.1.5 |
axrOspfv3IfRtrPriorityThe priority of this interface. Used in
multi-access networks, this field is used in
the designated router election algorithm. The
value 0 signifies that the router is not eligi-
ble to become the designated router on this
particular network. In the event of a tie in
this value, routers will use their Router ID as
a tie breaker.ro DesignatedRouterPriority .1.3.6.1.4.1.21839.2.1.1.15.7.1.6 |
axrOspfv3IfTransitDelayThe estimated number of seconds it takes to
transmit a link state update packet over this
interface.ro UpToMaxAge .1.3.6.1.4.1.21839.2.1.1.15.7.1.7 |
axrOspfv3IfRetransIntervalThe number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database descrip-
tion and link-state request packets.ro UpToMaxAge .1.3.6.1.4.1.21839.2.1.1.15.7.1.8 |
axrOspfv3IfHelloIntervalThe length of time, in seconds, between the
Hello packets that the router sends on the in-
terface. This value must be the same for all
routers attached to a common network.ro HelloRange .1.3.6.1.4.1.21839.2.1.1.15.7.1.9 |
axrOspfv3IfRtrDeadIntervalThe number of seconds that a router's Hello
packets have not been seen before it's neigh-
bors declare the router down. This should be
some multiple of the Hello interval. This
value must be the same for all routers attached
to a common network.ro PositiveInteger .1.3.6.1.4.1.21839.2.1.1.15.7.1.10 |
axrOspfv3IfPollIntervalThe larger time interval, in seconds, between
the Hello packets sent to an inactive non-
broadcast multi- access neighbor.ro PositiveInteger .1.3.6.1.4.1.21839.2.1.1.15.7.1.11 |
axrOspfv3IfStateThe axrOspfv3 Interface State.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.15.7.1.12 |
axrOspfv3IfDesignatedRouterThe Router ID of the Designated Router.ro RouterID .1.3.6.1.4.1.21839.2.1.1.15.7.1.13 |
axrOspfv3IfBackupDesignatedRouterThe Router ID of the Backup Designated
Router.ro RouterID .1.3.6.1.4.1.21839.2.1.1.15.7.1.15 |
axrOspfv3IfEventsThe number of times this OSPF interface has
changed its state, or an error has occurred.ro Counter32 .1.3.6.1.4.1.21839.2.1.1.15.7.1.16 |
axrOspfv3IfStatusThis variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.21839.2.1.1.15.7.1.18 |
axrOspfv3IfMulticastForwardingThe way multicasts should forwarded on this
interface; not forwarded, forwarded as data
link multicasts, or forwarded as data link uni-
casts. Data link multicasting is not meaning-
ful on point to point and NBMA interfaces, and
setting axrOspfv3MulticastForwarding to 0 effective-
ly disables all multicast forwarding.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.15.7.1.19 |
axrOspfv3IfDemandIndicates whether Demand axrOspfv3 procedures (hel-
lo supression to FULL neighbors and setting the
DoNotAge flag on proogated LSAs) should be per-
formed on this interface.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.21839.2.1.1.15.7.1.20 |
axrOspfv3IfMetricValueThe metric assigned to this interface.
The default value of the Metric is
10^8 / ifSpeed.ro Metric .1.3.6.1.4.1.21839.2.1.1.15.7.1.21 |
axrOspfv3IfLinkScopeLsaCountThe total number of Link-Scope link-state
advertisements in this link's link-state database.ro Gauge32 .1.3.6.1.4.1.21839.2.1.1.15.7.1.22 |
axrOspfv3IfLinkLsaCksumSumThe 32-bit unsigned sum of the Link-Scope link-state
advertisements' LS checksums contained in this
link's link-state database. The sum can be used
to determine if there has been a change in a
router's link state database, and to compare the
link-state database of two routers.ro Integer32 .1.3.6.1.4.1.21839.2.1.1.15.7.1.23 |
axrOspfv3IfInstIdEnables multiple instances of axrOspfv3 to be run over
a single link. Each protocol instance would be assigned
a separate ID. This ID has local link significance
only.ro Integer32 .1.3.6.1.4.1.21839.2.1.1.15.7.1.24 |
axrOspfv3VirtIfTableInformation about this router's virtual inter-
faces. SEQUENCE OF AxrOspfv3VirtIfEntry .1.3.6.1.4.1.21839.2.1.1.15.8 |
axrOspfv3VirtIfEntryInformation about a single Virtual Interface. AxrOspfv3VirtIfEntry .1.3.6.1.4.1.21839.2.1.1.15.8.1 |
axrOspfv3VirtIfDomainNumberospfv3 domain number.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.15.8.1.1 |
axrOspfv3VirtIfAreaIdThe Transit Area that the Virtual Link
traverses. By definition, this is not 0.0.0.0ro AreaID .1.3.6.1.4.1.21839.2.1.1.15.8.1.2 |
axrOspfv3VirtIfNeighborThe Router ID of the Virtual Neighbor.ro RouterID .1.3.6.1.4.1.21839.2.1.1.15.8.1.3 |
axrOspfv3VirtIfIndexThe interface index of this axrOspfv3 virtual interface.
It must be unique among all the interface indices
on the router.ro Ipv6IfIndex .1.3.6.1.4.1.21839.2.1.1.15.8.1.4 |
axrOspfv3VirtIfTransitDelayThe estimated number of seconds it takes to
transmit a link- state update packet over this
interface.ro UpToMaxAge .1.3.6.1.4.1.21839.2.1.1.15.8.1.5 |
axrOspfv3VirtIfRetransIntervalThe number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database descrip-
tion and link-state request packets. This
value should be well over the expected round-
trip time.ro UpToMaxAge .1.3.6.1.4.1.21839.2.1.1.15.8.1.6 |
axrOspfv3VirtIfHelloIntervalThe length of time, in seconds, between the
Hello packets that the router sends on the in-
terface. This value must be the same for the
virtual neighbor.ro HelloRange .1.3.6.1.4.1.21839.2.1.1.15.8.1.7 |
axrOspfv3VirtIfRtrDeadIntervalThe number of seconds that a router's Hello
packets have not been seen before it's neigh-
bors declare the router down. This should be
some multiple of the Hello interval. This
value must be the same for the virtual neigh-
bor.ro PositiveInteger .1.3.6.1.4.1.21839.2.1.1.15.8.1.8 |
axrOspfv3VirtIfStateOSPF virtual interface states.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.15.8.1.9 |
axrOspfv3VirtIfEventsThe number of state changes or error events on
this Virtual Linkro Counter32 .1.3.6.1.4.1.21839.2.1.1.15.8.1.10 |
axrOspfv3VirtIfStatusThis variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.21839.2.1.1.15.8.1.11 |
axrOspfv3VirtIfLinkScopeLsaCountThe total number of Link-Scope link-state
advertisements in this virtual link's link-state
database.ro Gauge32 .1.3.6.1.4.1.21839.2.1.1.15.8.1.12 |
axrOspfv3VirtIfLinkLsaCksumSumThe 32-bit unsigned sum of the Link-Scope link-state
advertisements' LS checksums contained in this
virtual link's link-state database. The sum can be used
to determine if there has been a change in a
router's link state database, and to compare the
link-state database of two routers.ro Integer32 .1.3.6.1.4.1.21839.2.1.1.15.8.1.13 |
axrOspfv3NbrTableA table of non-virtual neighbor information. SEQUENCE OF AxrOspfv3NbrEntry .1.3.6.1.4.1.21839.2.1.1.15.9 |
axrOspfv3NbrEntryThe information regarding a single neighbor. AxrOspfv3NbrEntry .1.3.6.1.4.1.21839.2.1.1.15.9.1 |
axrOspfv3NbrDomainNumberospfv3 domain number.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.15.9.1.1 |
axrOspfv3NbrIfIndexThe local link ID of the link over which the
neighbor can be reached.ro Ipv6IfIndex .1.3.6.1.4.1.21839.2.1.1.15.9.1.2 |
axrOspfv3NbrIpv6AddrThe IPv6 address of the neighbor associated with
the local link.ro Ipv6Address .1.3.6.1.4.1.21839.2.1.1.15.9.1.3 |
axrOspfv3NbrRtrIdA 32-bit integer (represented as a type IpAd-
dress) uniquely identifying the neighboring
router in the Autonomous System.ro RouterID .1.3.6.1.4.1.21839.2.1.1.15.9.1.4 |
axrOspfv3NbrOptionsA Bit Mask corresponding to the neighbor's op-
tions field.ro Integer32 .1.3.6.1.4.1.21839.2.1.1.15.9.1.5 |
axrOspfv3NbrPriorityThe priority of this neighbor in the designat-
ed router election algorithm. The value 0 sig-
nifies that the neighbor is not eligible to be-
come the designated router on this particular
network.ro DesignatedRouterPriority .1.3.6.1.4.1.21839.2.1.1.15.9.1.6 |
axrOspfv3NbrStateThe State of the relationship with this Neigh-
bor.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.15.9.1.7 |
axrOspfv3NbrEventsThe number of times this neighbor relationship
has changed state, or an error has occurred.ro Counter32 .1.3.6.1.4.1.21839.2.1.1.15.9.1.8 |
axrOspfv3NbrLsRetransQLenThe current length of the retransmission
queue.ro Gauge32 .1.3.6.1.4.1.21839.2.1.1.15.9.1.9 |
axrOspfv3NbrHelloSuppressedIndicates whether Hellos are being suppressed
to the neighborro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.21839.2.1.1.15.9.1.12 |
axrOspfv3NbrIfIdThe interface ID that the neighbor advertises
in its Hello Packets on this link, that is, the
neighbor's local interface index.ro Ipv6IfIndex .1.3.6.1.4.1.21839.2.1.1.15.9.1.13 |
axrOspfv3VirtNbrTableA table of virtual neighbor information. SEQUENCE OF AxrOspfv3VirtNbrEntry .1.3.6.1.4.1.21839.2.1.1.15.10 |
axrOspfv3VirtNbrEntryVirtual neighbor information. AxrOspfv3VirtNbrEntry .1.3.6.1.4.1.21839.2.1.1.15.10.1 |
axrOspfv3VirtNbrDomainNumberospfv3 domain number.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.15.10.1.1 |
axrOspfv3VirtNbrAreaThe Transit Area Identifier.ro AreaID .1.3.6.1.4.1.21839.2.1.1.15.10.1.2 |
axrOspfv3VirtNbrRtrIdA 32-bit integer uniquely identifying the
neighboring router in the Autonomous System.ro RouterID .1.3.6.1.4.1.21839.2.1.1.15.10.1.3 |
axrOspfv3VirtNbrIfIndexThe local link ID for the virtual link over
which the neighbor can be reached.ro Ipv6IfIndex .1.3.6.1.4.1.21839.2.1.1.15.10.1.4 |
axrOspfv3VirtNbrIpv6AddrThe IPv6 address used to reach this Virtual Neighbor.
It must be a Site-Local or Global scope address.ro Ipv6Address .1.3.6.1.4.1.21839.2.1.1.15.10.1.5 |
axrOspfv3VirtNbrOptionsA Bit Mask corresponding to the neighbor's op-
tions field.ro Integer32 .1.3.6.1.4.1.21839.2.1.1.15.10.1.6 |
axrOspfv3VirtNbrStateThe state of the Virtual Neighbor Relation-
ship.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.15.10.1.7 |
axrOspfv3VirtNbrEventsThe number of times this virtual link has
changed its state, or an error has occurred.ro Counter32 .1.3.6.1.4.1.21839.2.1.1.15.10.1.8 |
axrOspfv3VirtNbrLsRetransQLenThe current length of the retransmission
queue.ro Gauge32 .1.3.6.1.4.1.21839.2.1.1.15.10.1.9 |
axrOspfv3VirtNbrHelloSuppressedIndicates whether Hellos are being suppressed
to the neighborro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.21839.2.1.1.15.10.1.10 |
axrOspfv3VirtNbrIfIdThe interface ID that the neighbor advertises
in its Hello Packets on this virtual link, that is,
the neighbor's local interface index.ro Ipv6IfIndex .1.3.6.1.4.1.21839.2.1.1.15.10.1.11 |
axrOspfv3AreaAggregateTableA range of IPv6 prefixes specified by a
prefix/prefix length pair. Note that if
ranges are configured such that one range sub-
sumes another range the most specific match is
the preferred one. SEQUENCE OF AxrOspfv3AreaAggregateEntry .1.3.6.1.4.1.21839.2.1.1.15.11 |
axrOspfv3AreaAggregateEntryA range of IPv6 prefixes specified by a
prefix/prefix length pair. Note that if
ranges are configured such that one range sub-
sumes another range the most specific match is
the preferred one. AxrOspfv3AreaAggregateEntry .1.3.6.1.4.1.21839.2.1.1.15.11.1 |
axrOspfv3AreaAggregateDomainNumberospfv3 domain number.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.15.11.1.1 |
axrOspfv3AreaAggregateAreaIDThe Area the Address Aggregate is to be found
within.ro AreaID .1.3.6.1.4.1.21839.2.1.1.15.11.1.2 |
axrOspfv3AreaAggregateAreaLsdbTypeThe type of the Address Aggregate. This field
specifies the Area Lsdb type that this Address Ag-
axregate applies to.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.15.11.1.3 |
axrOspfv3AreaAggregateIndexA unique identifier for this aggregate table entry.ro INTEGER .1.3.6.1.4.1.21839.2.1.1.15.11.1.4 |
axrOspfv3AreaAggregatePrefixThe IPv6 Prefix.ro Ipv6AddressPrefix .1.3.6.1.4.1.21839.2.1.1.15.11.1.5 |
axrOspfv3AreaAggregatePrefixLenThe length of the prefix (in bits). A prefix can
not be shorter than 3 bits.ro INTEGER ( 3..128 ) -- UNITS "bits" .1.3.6.1.4.1.21839.2.1.1.15.11.1.6 |
axrOspfv3AreaAggregateStatusThis variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.21839.2.1.1.15.11.1.7 |
axrOspfv3AreaAggregateEffectPrefixes subsumed by ranges either trigger the
advertisement of the indicated aggregate (ad-
vertiseMatching), or result in the prefix not
being advertised at all outside the area.ro Enumeration .1.3.6.1.4.1.21839.2.1.1.15.11.1.8 |
ax2000rMib OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.1.4 |
ax2000rRouter OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.1.4.1 |
ax2000rModelTypeModel type of this system.ro Enumeration .1.3.6.1.4.1.21839.2.1.4.1.1 |
ax2000rSoftware OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.1.4.1.2 |
ax2000rSoftwareNameSoftware name of this system.ro DisplayString .1.3.6.1.4.1.21839.2.1.4.1.2.1 |
ax2000rSoftwareAbbreviationSystem software abbreviation.ro DisplayString .1.3.6.1.4.1.21839.2.1.4.1.2.2 |
ax2000rSoftwareVersionSystem software version.ro DisplayString .1.3.6.1.4.1.21839.2.1.4.1.2.3 |
ax2000rSystemMsg OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.1.4.1.3 |
ax2000rSystemMsgTextThe text of the system log message.For information about this code,
see: Operator's Manual.ro DisplayString .1.3.6.1.4.1.21839.2.1.4.1.3.1 |
ax2000rSystemMsgTypeThe event type. For information about this code, see: Operator's Manual.ro OCTET STRING .1.3.6.1.4.1.21839.2.1.4.1.3.2 |
ax2000rSystemMsgTimeStampThe time that event occured. And that is expressed as type of
MM/DD hh:mm:ss
MM:month(01-12)
DD:day(01-31)
hh:hour(00-23)
mm:minute(00-59)
ss:second(00-59)
Insert space between DD and hh.ro DisplayString .1.3.6.1.4.1.21839.2.1.4.1.3.3 |
ax2000rSystemMsgLevelThe newest system message log level.For information about this code,
see: Operator's Manual.ro OCTET STRING .1.3.6.1.4.1.21839.2.1.4.1.3.4 |
ax2000rSystemMsgEventPointThe code of part that system message error occured. For information
about this code,see: Operator's Manual.ro DisplayString .1.3.6.1.4.1.21839.2.1.4.1.3.5 |
ax2000rSystemMsgEventInterfaceIDInterface identification of system messages. For information
about this code,see: Operator's Manual.ro DisplayString .1.3.6.1.4.1.21839.2.1.4.1.3.6 |
ax2000rSystemMsgEventCodeEvent kind code of system messages. For information about this code,
see: Operator's Manual.ro OCTET STRING .1.3.6.1.4.1.21839.2.1.4.1.3.7 |
ax2000rSystemMsgAdditionalCodeAdditional code of system messages. For information about this code,
see: Operator's Manual.ro OCTET STRING .1.3.6.1.4.1.21839.2.1.4.1.3.8 |
ax2000rSnmpAgent OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.1.4.1.4 |
ax2000rSnmpSendReceiveSizeSNMP packet data size in Manager-to-Agent communication. The value is
displayed in bytes.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.1.4.1 |
ax2000rSnmpReceiveDelayA recommendable interval to receive packets from Manager.The value is
displayed in milliseconds.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.1.4.2 |
ax2000rSnmpContinuousSendNumber of times that is recommendable continuous transmission
packets.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.1.4.3 |
ax2000rSnmpObjectMaxNumberMax number of objects that contain SNMP packet.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.1.4.4 |
ax2000rSerialNumberManagement information (SerialNumber) of RMP2-CARD.ro DisplayString .1.3.6.1.4.1.21839.2.1.4.1.5 |
ax2000rDevice OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.1.4.2 |
ax2000rChassis OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.1.4.2.1 |
ax2000rChassisMaxNumberMax number of cluster chassis that can connect to this router.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.1.1 |
ax2000rChassisTableA table containing chassis information. SEQUENCE OF Ax2000rChassisTableEntry .1.3.6.1.4.1.21839.2.1.4.2.1.2 |
ax2000rChassisEntryAn entry containing specific chassis. Ax2000rChassisTableEntry .1.3.6.1.4.1.21839.2.1.4.2.1.2.1 |
ax2000rChassisIndexA number to specify ax2000rChassisEntry. INTEGER .1.3.6.1.4.1.21839.2.1.4.2.1.2.1.1 |
ax2000rChassisTypeChassis type of this system.ro Enumeration .1.3.6.1.4.1.21839.2.1.4.2.1.2.1.2 |
ax2000rChassisStatusCurrent status of this chassis.ro Enumeration .1.3.6.1.4.1.21839.2.1.4.2.1.2.1.3 |
ax2000rRmBoardDuplexModeDuplex mode of RM Board.ro Enumeration .1.3.6.1.4.1.21839.2.1.4.2.1.2.1.4 |
ax2000rPowerUnitNumberNumber of maximum power switches that this router can connect its.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.1.2.1.5 |
ax2000rFanNumberThe maximum number of fans that can connect to this chassis.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.1.2.1.6 |
ax2000rCifNumberNumber of cluster interfaces that can connect to this chassis.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.1.2.1.7 |
ax2000rRmBoardNumberNumber of RM(Routing Manager) boards that can connect to
this chassis.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.1.2.1.8 |
ax2000rRpBoardNumberNumber of RP(Routing Processor) boards that can connect to
this chassis.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.1.2.1.9 |
ax2000rNifBoardNumberNumber of NIF(Network InterFace) boards that can connect to
this chassis.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.1.2.1.10 |
ax2000rCswNumberNumber of CSW(Crossbar SWitch) that can load into this chassis.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.1.2.1.11 |
ax2000rPsInputNumberThe maximum number of PSINPUT that can connect to this chassis.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.1.2.1.12 |
ax2000rPowerUnitTableA table containing power unit information. SEQUENCE OF Ax2000rPowerUnitTableEntry .1.3.6.1.4.1.21839.2.1.4.2.1.3 |
ax2000rPowerUnitEntryAn entry containing power unit information. Ax2000rPowerUnitTableEntry .1.3.6.1.4.1.21839.2.1.4.2.1.3.1 |
ax2000rPowerUnitIndexA number to position of the power units.The value from 1
to ax2000rPowerUnitNumber. INTEGER .1.3.6.1.4.1.21839.2.1.4.2.1.3.1.1 |
ax2000rPowerConnectStatusThe current connection status of the power unit.ro Enumeration .1.3.6.1.4.1.21839.2.1.4.2.1.3.1.2 |
ax2000rPowerSupplyStatusStatus of power supply.ro Enumeration .1.3.6.1.4.1.21839.2.1.4.2.1.3.1.3 |
ax2000rFanTableA table containing fan information. SEQUENCE OF Ax2000rFanTableEntry .1.3.6.1.4.1.21839.2.1.4.2.1.4 |
ax2000rFanEntryThis entry containing information for a fan. Ax2000rFanTableEntry .1.3.6.1.4.1.21839.2.1.4.2.1.4.1 |
ax2000rFanIndexIndex to indicate position of fans. INTEGER .1.3.6.1.4.1.21839.2.1.4.2.1.4.1.1 |
ax2000rFanStatusStatus of fans.ro Enumeration .1.3.6.1.4.1.21839.2.1.4.2.1.4.1.2 |
ax2000rCswTableA table containing CSW(Crossbar SWitch) information. SEQUENCE OF Ax2000rCswTableEntry .1.3.6.1.4.1.21839.2.1.4.2.1.5 |
ax2000rCswEntryAn entry containing CSW(Crossbar SWitch) information. Ax2000rCswTableEntry .1.3.6.1.4.1.21839.2.1.4.2.1.5.1 |
ax2000rCswIndexAn unique value indicates connecting position of CSWs.The value
form 1 to ax2000rCswNumber. INTEGER .1.3.6.1.4.1.21839.2.1.4.2.1.5.1.1 |
ax2000rCswStatusConnecting status of CSW.ro Enumeration .1.3.6.1.4.1.21839.2.1.4.2.1.5.1.2 |
ax2000rPsInputTableA table containing PSINPUT information. SEQUENCE OF Ax2000rPsInputTableEntry .1.3.6.1.4.1.21839.2.1.4.2.1.6 |
ax2000rPsInputEntryAn entry containing PSINPUT information. Ax2000rPsInputTableEntry .1.3.6.1.4.1.21839.2.1.4.2.1.6.1 |
ax2000rPsInputIndexAn unique value indicates connecting position of PSINPUTs.The value
from 1 to ax2000rPsInputNumber. INTEGER .1.3.6.1.4.1.21839.2.1.4.2.1.6.1.1 |
ax2000rPsInputTypeType of the PSINPUT. The value is -1 when PSINPUT is disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.1.4.2.1.6.1.2 |
ax2000rPsInputConnectStatusThe current connection status of the PSINPUT.ro Enumeration .1.3.6.1.4.1.21839.2.1.4.2.1.6.1.3 |
ax2000rPsInputSupplyStatusConnecting status of PSINPUT.
The value is -1 when PSINPUT is disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.1.4.2.1.6.1.4 |
ax2000rRmBoard OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.1.4.2.2 |
ax2000rRmBoardTableA table containing RM(Routing Manager) boards information. SEQUENCE OF Ax2000rRmBoardTableEntry .1.3.6.1.4.1.21839.2.1.4.2.2.1 |
ax2000rRmBoardEntryAn entry containing RM(Routing Manager) boards about specific
chassis. Ax2000rRmBoardTableEntry .1.3.6.1.4.1.21839.2.1.4.2.2.1.1 |
ax2000rRmBoardIndexPosition information of the RM slot. The value is from 1 to
ax2000rRmBoardCardNumber. INTEGER .1.3.6.1.4.1.21839.2.1.4.2.2.1.1.1 |
ax2000rRmIoBoardTypeRM(Routing Manager) IO board ID.
model2S/model4 RM-IO (4096)
model10/model20 RM-IO (16781312)
model4S RM-IO (16781568)
model6H/model10H/model20H RM-IO (16781824)
model6H/model10H/model20H RMB-IO(16782080)
model4S RMB-IO (16782336)
model1B/model2B RMBB-IO (10752)
modelBH RMBH-IO (5888)
The value is -1 when RM board is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.2.1.1.2 |
ax2000rRmCpuBoardTypeThe value of RM board ID.
RM(CPU) 0 (0x0000)
RMB(CPU) 256 (0x0100)
The value is -1 when RM board is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.2.1.1.3 |
ax2000rRmOperStatusStatus of LED on RM board. The value is -1 when RM board is
disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.1.4.2.2.1.1.4 |
ax2000rRmOperModeStatusOperate status on RM board. The value is -1 when RM board is
disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.1.4.2.2.1.1.5 |
ax2000rRmActiveLedStatusStatus of ACTIVE LED on RM board. The value is -1 when RM board is
disconnected or LED status is unknown.ro Enumeration .1.3.6.1.4.1.21839.2.1.4.2.2.1.1.6 |
ax2000rRmReadyLedStatusStatus of READY LED on RM board. The value is -1 when RM board is
disconnected or LED status is unknown.ro Enumeration .1.3.6.1.4.1.21839.2.1.4.2.2.1.1.7 |
ax2000rRmAlarmLedStatusStatus of ALARM LED on RM board. The value is -1 when RM board is
disconnected or LED status is unknown.ro Enumeration .1.3.6.1.4.1.21839.2.1.4.2.2.1.1.8 |
ax2000rRmErrorLedStatusStatus of LED ERROR on RM board. The value is -1 when RM board is
disconnected or LED status is unknown.ro Enumeration .1.3.6.1.4.1.21839.2.1.4.2.2.1.1.9 |
ax2000rRmEmaLedStatusStatus of LED EMA READY on RM board. The value is -1 when RM board is
disconnected or LED status is unknown.ro Enumeration .1.3.6.1.4.1.21839.2.1.4.2.2.1.1.10 |
ax2000rRmStatusCodeThe status code of 7 segments on RM board.(00-99)ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.2.1.1.11 |
ax2000rRmEthernetStatusOperaion status on RM ethernet. The value is -1 when RM board is
disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.1.4.2.2.1.1.12 |
ax2000rRmAtaCardNumberNumber of slots in ATA card. The value is 0 when RM board is
disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.2.1.1.13 |
ax2000rRmAtaBootDevThe value of ATA slots number when router booted. The value is -1
when RM board is disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.1.4.2.2.1.1.14 |
ax2000rRmBoardNameThe product name of RM-IO board.When RM board is disconnected,
this will be an OCTET STRING of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.1.4.2.2.1.1.15 |
ax2000rRmBoardAbbreviationThe abbreviation name of RM-IO board.When RM board is disconnected,
this will be an OCTET STRING of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.1.4.2.2.1.1.16 |
ax2000rRmIoBoardProductCodeThe manufacturing management number of RM-IO board.The value is
-1 when RM board is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.2.1.1.17 |
ax2000rRmCpuBoardProductCodeThe manufacturing management number of RM-CPU board.The value is
-1 when RM board is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.2.1.1.18 |
ax2000rRmCpuNameThe CPU name of board that load RM.When RM board is disconnected,
this will be an OCTET STRING of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.1.4.2.2.1.1.19 |
ax2000rRmCpuClockThe CPU clock of board that load RM. The value is displayed in
mega-hertz(MHz). The value is -1 when RM board is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.2.1.1.20 |
ax2000rRmMemoryTotalSizeTotal memory sizes of RM. The value is displayed in kilobyte(KB).
The value is -1 when RM board is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.2.1.1.21 |
ax2000rRmMemoryUsedSizeUsing memory sizes of RM. The value is displayed in kilobyte(KB).
The value is -1 when RM board is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.2.1.1.22 |
ax2000rRmMemoryFreeSizeFree memory sizes of RM. The value is displayed in kilobyte(KB).
The value is -1 when RM board is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.2.1.1.23 |
ax2000rRmRomVersionThe version of Rom on RM board. When RM board is disconnected,
this will be an OCTET STRING of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.1.4.2.2.1.1.24 |
ax2000rRmCpuLoad1mThe average, over the last minute, of the percentage of time that
this processor was utilized to processing and transfer data.
The value is -1 when RM board is standby or disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.2.1.1.25 |
ax2000rRmTemperatureStatusNumberThe maximum number of ax2000rTemperatureStatus that can be measurement at this chassis.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.2.1.1.26 |
ax2000rAtaCardTableA table containing ATA Card information. SEQUENCE OF Ax2000rAtaCardTableEntry .1.3.6.1.4.1.21839.2.1.4.2.2.2 |
ax2000rAtaCardEntryAn entry containing ATA Card information. Ax2000rAtaCardTableEntry .1.3.6.1.4.1.21839.2.1.4.2.2.2.1 |
ax2000rAtaCardIndexConnected position of ATA cards.The value is 1 plus slot number
that ATA card is inserted.The value is from 1 to ax2000rRmAtaCardNumber. INTEGER .1.3.6.1.4.1.21839.2.1.4.2.2.2.1.1 |
ax2000rAtaCardConnectionConnected status of ATA cards.ro Enumeration .1.3.6.1.4.1.21839.2.1.4.2.2.2.1.2 |
ax2000rAtaCardTotalSizeTotal capacity of ATA cards.The value is displayed in kilobyte
(kbyte).And the value is -1 when ATA cards is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.2.2.1.3 |
ax2000rAtaCardUsedSizeUsing capacity of ATA cards.The value is displayed in kilobyte
(kbyte).And the value is -1 when ATA cards is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.2.2.1.4 |
ax2000rAtaCardFreeSizeThe rest capacity of ATA card. The value is displayed in kilobyte
(kbyte). The value is -1 when ATA card is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.2.2.1.5 |
ax2000rAtaCardNameThe product name of ATA card. When the ATA card is unknown,
this OCTET STRING value is 'unknown'. When ATA card is disconnected,
this will be an OCTET STRING of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.1.4.2.2.2.1.6 |
ax2000rAtaCardAbbreviationThe kind of ATA card. When ATA card is disconnected,this will be an
OCTET STRING of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.1.4.2.2.2.1.7 |
ax2000rAtaCardMountStatusThe mount state of ATA card. The value is -1 when ATA card is
disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.1.4.2.2.2.1.8 |
ax2000rTemperatureStatusTableThe table of ambient temperature status maintained by the
environmental monitor. SEQUENCE OF Ax2000rTemperatureStatusEntry .1.3.6.1.4.1.21839.2.1.4.2.2.3 |
ax2000rTemperatureStatusEntryAn entry in the ambient temperature status table, representing
the status of the associated testpoint maintained by the
environmental monitor. Ax2000rTemperatureStatusEntry .1.3.6.1.4.1.21839.2.1.4.2.2.3.1 |
ax2000rTemperatureStatusIndexUnique index for the testpoint being instrumented.
This index is for SNMP purposes only, and has no
intrinsic meaning. INTEGER .1.3.6.1.4.1.21839.2.1.4.2.2.3.1.1 |
ax2000rTemperatureStatusDescrTextual description of the testpoint being instrumented.
This description is a short textual label, suitable as a
human-sensible identification for the rest of the
information in the entry.ro DisplayString .1.3.6.1.4.1.21839.2.1.4.2.2.3.1.2 |
ax2000rTemperatureStatusValueThe current measurement of the testpoint being instrumented.ro Gauge .1.3.6.1.4.1.21839.2.1.4.2.2.3.1.3 |
ax2000rTemperatureThresholdThe highest value that the associated instance of the
object ax2000rTemperatureStatusValue may obtain
before an emergency shutdown of the managed device is
initiated.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.2.3.1.4 |
ax2000rTemperatureStateThe current state of the testpoint being instrumented.ro Enumeration .1.3.6.1.4.1.21839.2.1.4.2.2.3.1.5 |
ax2000rRpBoard OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.1.4.2.3 |
ax2000rRpBoardTableA table containing RP(Routing Processor) boards information about
specific chassis. SEQUENCE OF Ax2000rRpBoardTableEntry .1.3.6.1.4.1.21839.2.1.4.2.3.1 |
ax2000rRpBoardEntryAn entry containing RP(Routing Processor) boards about specific
chassis. Ax2000rRpBoardTableEntry .1.3.6.1.4.1.21839.2.1.4.2.3.1.1 |
ax2000rRpBoardIndexPosition information of the RP slots. The value is from 1 to
ax2000rRpBoardNumber. INTEGER .1.3.6.1.4.1.21839.2.1.4.2.3.1.1.1 |
ax2000rRpBoardTypeRP(Routing Processor) boards ID.
RP-A (8192) (0x2000)
RP-A1 (8448) (0x2100)
RP-C (9216) (0x2400)
RP-D (9472) (0x2500)
RP-C6 (9728) (0x2600)
RP-D6 (9984) (0x2700)
The value is -1 when RP board is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.3.1.1.2 |
ax2000rRpOperStatusOperation stasus of RP board.(STATUS LED)ro Enumeration .1.3.6.1.4.1.21839.2.1.4.2.3.1.1.3 |
ax2000rRpBoardNameRP board name. When RP board is disconnected, this will be an OCTET
STRING of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.1.4.2.3.1.1.4 |
ax2000rRpBoardAbbreviationThe abbreviation name of RP board. When RP board is disconnected,
this will be an OCTET STRING of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.1.4.2.3.1.1.5 |
ax2000rRpBoardProductCodeThe revision of RP board. When RP board is disconnected,
this will be an OCTET STRING of zero length.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.3.1.1.6 |
ax2000rRpMemoryTotalSizeTotal memory sizes of RP. The value is displayed in kilobyte(KB).
The value is -1 when RP board is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.3.1.1.7 |
ax2000rRpMemoryUsedSizeUsing memory sizes of RP. The value is displayed in kilobyte(KB).
The value is -1 when RP board is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.3.1.1.8 |
ax2000rRpMemoryFreeSizeFree memory sizes of RP. The value is displayed in kilobyte(KB).
The value is -1 when RP board is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.3.1.1.9 |
ax2000rRpOption1CardNameProduct name of RP board that is loaded onto slot of secret cord and
compression option. When RP board is disconnected or option card
isn't loaded, this will be an OCTET STRING of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.1.4.2.3.1.1.10 |
ax2000rRpOption1CardAbbreviationProduct name of the board which is loaded into RP cryptogram/compress
option slot.When RP board is disconnected, this will be an OCTET STRING
of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.1.4.2.3.1.1.11 |
ax2000rRpOption1CardProductCodeProduct code of the board which is loaded into RP cryptogram/compress
option slot.When RP board is disconnected, this will be an OCTET STRING
of zero length.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.3.1.1.12 |
ax2000rRpOption2CardNameProduct name of the board which is loaded into RP statistics option
slot.When RP board is disconnected,this will be an OCTET STRING of zero
length.ro DisplayString .1.3.6.1.4.1.21839.2.1.4.2.3.1.1.13 |
ax2000rRpOption2CardAbbreviationAbbreviation name of the board which is loaded into RP statistics
option slot.When RP board is disconnected,this will be an OCTET STRING
of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.1.4.2.3.1.1.14 |
ax2000rRpOption2CardProductCodeProduct management code of board which is loaded into RP statistics
option slot.When RP board is disconnected,the value is -1.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.3.1.1.15 |
ax2000rRpCpuLoad1mThe average,over the last minute,of a percentage of time that
this processor was utilized for processing and transferring data.
The rate of use CPU is -1, except that RP status is active.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.3.1.1.16 |
ax2000rNifBoard OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.1.4.2.4 |
ax2000rNifBoardTableA table containing Network Interface cards (NIF) information that
slot is loaded. SEQUENCE OF Ax2000rNifBoardTableEntry .1.3.6.1.4.1.21839.2.1.4.2.4.1 |
ax2000rNifBoardEntryAn entry containing NIF information about specific chassis. Ax2000rNifBoardTableEntry .1.3.6.1.4.1.21839.2.1.4.2.4.1.1 |
ax2000rNifBoardSlotIndexPosition information of NIF loading slot. The value is from 1
to ax2000rNifBoardNumber.
modelBH : 1-2
model1B : 1,3
model2S model2B : 1-3
model4, model4S : 1-4
model6H : 1-6
model10,model10H : 1-10
model20,model20H : 1-20 INTEGER .1.3.6.1.4.1.21839.2.1.4.2.4.1.1.1 |
ax2000rNifBoardTypeType of connecting package.The value is register value of NIF package.
other (1)
8-port 10BASE-T/100BASE-TX (16384)
4-port 10BASE-T/100BASE-TX (16385)
1-port 10BASE-T/100BASE-TX (17153)
1-port 1000BASE-LX (16387)
1-port 1000BASE-SX (16388)
1-port 1000BASE-LH (16389)
4-port 100BASE-FX (16390)
4-port 100BASE-FX(middle) (16391)
4-port 100BASE-FX(long) (16392)
8-port 10BASE-T/100BASE-TX (16393)
1-port 1000BASE-LX (16394)
1-port 1000BASE-SX (16395)
1-port 1000BASE-LH8 (16396)
1-port 1000BASE-LH (16645)
8-port 10BASE-T/100BASE-TX (16649)
1-port 1000BASE-LX (16650)
1-port 1000BASE-SX (16651)
1-port 1000BASE-LH8 (16652)
4-port 1000BASE-X (16897)
4-port serial(V.24/V.35/X.21) (32769)
8-port BRI(leasedline/dialup) (32772)
4-port PRI(leasedline/dialup) (32780)
2-port PRI(leasedline/dialup) (32778)
4-port T1(leasedline) (32784)
2-port PRI2-port BRI(leasedline/dialup) (32795)
2-port 6.3Minterface(leasedline) (32793)
1-port 6.3Minterface(leasedline) (32791)
4-port E1(leasedline) (32788)
8-port PRI(leasedline/dialup) (32790)
8-port E1(leased line) (32796)
1-port CT3(leased line) (32798)
1-port CE3(leasedline) (32799)
2-port E3(leasedline) (41032)
2-port OC-3c/STM-1POS(single-mode) (41090)
2-port OC-3c/STM-1POS(multi-mode) (41091)
2-port OC-3c/STM-1POS(single-modeMPLS) (41092)
2-port OC-3c/STM-1POS(multi-modeMPLS) (41093)
1-port OC-12c/STM-4POS(single-mode) (41104)
1-port OC-12c/STM-4POS(single-modeMPLS) (41108)
1-port OC-48c/STM-16POS(single-mode) (41120)
2-port T3(leasedline) (41024)
8-port OC-3c/STM-1POS(multi-mode) (41136)
8-port OC-3c/STM-1POS(single-mode) (41137)
4-port OC-12c/STM-4POS(multi-mode) (41152)
4-port OC-12c/STM-4POS(single-mode) (41153)
1-port OC-48c/STM-16POS(single-mode) (41168)
1-port OC-48c/STM-16POS(single-modenif-aps) (41169)
1-port OC-48c/STM-16POS(single-modemiddle) (41172)
1-port OC-48c/STM-16POS(single-modemiddlenif-aps) (41173)
1-port OC-48c/STM-16POS(single-modelong) (41174)
1-port OC-48c/STM-16POS(single-modelongnif-aps) (41175)
1-port OC-3c/STM-1ATM(multi-mode) (49152)
1-port OC-3c/STM-1ATM(single-mode) (49153)
1-port 25MATM (49155)
8-port OC-3c/STM-1ATM(multi-mode) (49168)
8-port OC-3c/STM-1ATM(single-mode) (49169)
8-port OC-3c/STM-1ATM(single-mode long) (49170)
2-port OC-12c/STM-4ATM(multi-mode) (49184)
2-port OC-12c/STM-4ATM(single-mode) (49185)
2-port OC-12c/STM-4ATM(single-mode long) (49186)
The value is -1 when RP is disconnected or NIF disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.4.1.1.2 |
ax2000rNifBoardOperStatusOperation status of Network InterFace(NIF) board.(STATUS LED)ro Enumeration .1.3.6.1.4.1.21839.2.1.4.2.4.1.1.3 |
ax2000rNifBoardNameNetwork InterFace(NIF) board name. When RP board or NIF board is
disconnected,this will be an OCTET STRING of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.1.4.2.4.1.1.4 |
ax2000rNifBoardAbbreviationThe abbreviation name of Network InterFace(NIF) board. When RP board
or NIF board is disconnected, this will be an OCTET STRING of zero
length.ro DisplayString .1.3.6.1.4.1.21839.2.1.4.2.4.1.1.5 |
ax2000rNifBoardProductCodeThe product management code of Network InterFace(NIF) board.The value
is -1 when RP board or NIF board is disconncted.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.4.1.1.6 |
ax2000rNifPhysLineNumberNumber of Network InterFace(NIF)'s physical port.The max is 8.
The value is -1 when value of ax2000rNifCardType is -1 or other(1).ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.4.1.1.7 |
ax2000rNifSerialNumberManagement information (SerialNumber) of Network InterFace(NIF) package.ro DisplayString .1.3.6.1.4.1.21839.2.1.4.2.4.1.1.8 |
ax2000rPhysLine OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.1.4.2.5 |
ax2000rPhysLineTableA table containing physical port information. SEQUENCE OF Ax2000rPhysLineTableEntry .1.3.6.1.4.1.21839.2.1.4.2.5.1 |
ax2000rPhysLineEntryAn entry containing physical port. Ax2000rPhysLineTableEntry .1.3.6.1.4.1.21839.2.1.4.2.5.1.1 |
ax2000rPhysLineIndexPhysical port number. The value is from 1 to ax2000rNifLineNumber. INTEGER .1.3.6.1.4.1.21839.2.1.4.2.5.1.1.1 |
ax2000rPhysLineConnectorTypeConnector type is connected physical port. The value is 1(other)
when connector is disconnected or connector type is unknown.When
displaying in pannel, requests board name of NIF,then will display it.
The value is -1 when RP or NIF board is disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.1.4.2.5.1.1.2 |
ax2000rPhysLineOperStatusStatus of physical port. The value is -1 when RP or NIF board is
disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.1.4.2.5.1.1.3 |
ax2000rPhysLineIfIndexNumberNumber of ifIndex which is included in physical port.The value is -1
when RP board or NIF board is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.5.1.1.4 |
ax2000rInterface OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.1.4.2.6 |
ax2000rLineIfTableA table containing physical port correspond to ifIndex. SEQUENCE OF Ax2000rLineIfTableEntry .1.3.6.1.4.1.21839.2.1.4.2.6.1 |
ax2000rLineIfEntryAn entry containing ifIndex is assigned to physical port. Ax2000rLineIfTableEntry .1.3.6.1.4.1.21839.2.1.4.2.6.1.1 |
ax2000rLineIfIndexThe value of ifIndex to distinguish entry of this table.The value is
from 1 to ax2000rPhysLineIfIndexNumber. INTEGER .1.3.6.1.4.1.21839.2.1.4.2.6.1.1.1 |
ax2000rIfIndexThe value of ifIndex which is assigned to this physical port.
The value is 0 when ifIndex is not assigned to this physical port.ro INTEGER .1.3.6.1.4.1.21839.2.1.4.2.6.1.1.2 |
ax2000rIfIpAddressThe IP address correspond to ifIndex which is assigned to this
physical port. If IP address is not assigned, it is '0.0.0.0'.ro IpAddress .1.3.6.1.4.1.21839.2.1.4.2.6.1.1.3 |
ax2000rIfIpv6AddressThe IPv6 address correspond to ifIndex which is assigned to this
physical port. If IPv6 address is not assigned,
it is '00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00'.ro OCTET STRING .1.3.6.1.4.1.21839.2.1.4.2.6.1.1.4 |