ATM-OPT-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ATM-OPT-MIB.
112
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
112 total| Object Name |
|---|
codex OBJECT IDENTIFIER .1.3.6.1.4.1.449 |
RFC1155-SMI Unknown .1.3.6.1.4.1.449 |
cdxProductSpecific OBJECT IDENTIFIER .1.3.6.1.4.1.449.2 |
cdx6500 OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1 |
cdx6500Configuration OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2 |
cdx6500CfgProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1 |
cdx6500PCTPortProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1.1 |
cdx6500PPCTATMPortTableThis table contains ATM Port configuration
parameters. SEQUENCE OF Cdx6500PPCTATMPortEntry .1.3.6.1.4.1.449.2.1.2.1.1.35 |
cdx6500PPCTATMPortEntryEntries in the ATM Port Configuration Table. Cdx6500PPCTATMPortEntry .1.3.6.1.4.1.449.2.1.2.1.1.35.1 |
atmPCfgPortNumberPort number of this port.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.35.1.1 |
atmPCfgPortTypePort type of the Port.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.35.1.2 |
atmPCfgMaxVPIRangeThis parameter specifies the maximum VPI value that any station on
this port can operate with. Increasing this value has the effect of
decreasing the maximum VPI that can be specified .rodeprecated INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.35.1.3 |
atmPCfgMaxVCIRangeThis parameter specifies the maximum VCI value that any station on
this port can operate with. Increasing this value has the effect of
decreasing the maximum VCI that can be specified .rodeprecated INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.35.1.4 |
atmPCfgLinkAssuranceTimerIf PVC Link Assurance Method is set to LOOPBACK, this is the
amount of time in seconds between sending F5 loopback cells .rodeprecated INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.35.1.5 |
atmPCfgLinkAssuranceCountIf PVC Link Assurance Method is set to LOOPBACK, this is the
number of retries sent before declaring that the link is down .rodeprecated INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.35.1.6 |
atmPCfgCCActDeactTimerIf PVC Link Assurance Method is set to NEGOTIATE CC cells this is the
amount of time in seconds between retransmissions of Activate or
Deactivate cells.rodeprecated INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.35.1.7 |
atmPCfgCCActDeactCountIf PVC Link Assurance Method is set to NEGOTIATE CC cells this is the
number of times to send an Activate or Deactivate cell before declaring
that the negotiation procedure has failed .rodeprecated INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.35.1.8 |
atmPCfgVCCTrafficPrioritizationAll station VCCs that operate on the port must run with the same traffic
prioritization dicipline. This port parameter specifies the priorization
as follows:
DISABLE - There is no prioritization of traffic within a VCC.
SEQUENCE - High priority and normal priority traffic are placed in separate
queues which are serviced in sequential round robin order.
PRIORITY - High priority and normal priority traffic are placed in separate
queues. The high priority queue is serviced completely before
the low priority queue.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.35.1.9 |
cdx6500PCTStationProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1.3 |
cdx6500SPCTATMStationTableThis table contains ATM Station configuration
parameters. SEQUENCE OF Cdx6500SPCTATMStationEntry .1.3.6.1.4.1.449.2.1.2.1.3.10 |
cdx6500SPCTATMStationEntryEntries in the ATM Station Configuration Table. Cdx6500SPCTATMStationEntry .1.3.6.1.4.1.449.2.1.2.1.3.10.1 |
atmSCfgPortNumberThe ATM port number corresponding to this station.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.3.10.1.1 |
atmSCfgStnNumberThe number of the configured ATM Station.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.3.10.1.2 |
atmSCfgVPIThe Virtual Path Identifier (VPI) is the provisioned virtual path
number for the station of circuit type PVC on the ATM port.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.3.10.1.3 |
atmSCfgVCIThe Virtual Circuit Identifier (VCI) is the provisioned virtual circuit
number for the station of circuit type PVC on the ATM port.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.3.10.1.4 |
atmSCfgLinkAssuranceMethodPVC link assurance method to use:
DISABLED - No checking is performed
LOOPBACK - Periodically send a loopback cell
NEGOTIATE - Negotiate use of CC cells
ENABLED - Always use CC cells .ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.3.10.1.5 |
atmSCfgTrafficServiceCategoryThe service category is the traffic type for the operation
of the station. The traffic types are:
UBR - Unspecified Bit Rate
CBR - Constant Bit Rate
VBR - Variable Bit Rate.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.3.10.1.6 |
atmSCfgPeakCellRateThis parameter (PCR) specifies the rate (cells per second) the
network agrees to receive cells from the station
PCR is configuredin multiples of 20 cells per second.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.3.10.1.7 |
atmSCfgVBRTrafficShapingSpecifies whether a station configured for VBR traffic category conforms
to single or dual leaky bucket traffic shaping. Single leaky bucket means
the traffic is shaped to only a PCR. Dual bucket shaping means traffic is
shaped to PCR as well as SCR and MBS.
SINGLE - Single Bucket VBR
DUAL - Dual Bucket VBR.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.3.10.1.8 |
atmSCfgVCCPriorityLevelThis parameter controls the priority of the station VCC in comparison to
other stations within the same service category (either UBR or VBR). For
VBR traffic category, setting this parameter to HIGH classifies a VCC as
VBRrt (VBR real time). For VBRnrt (non-real time) select NORMAL.
NORMAL - Normal priority
HIGH - High priority.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.3.10.1.9 |
atmSCfgSustainableCellRateThis parameter (SCR) specifies the rate (cells per second) the
network agrees to receive cells from the station. This parameter
characterizes the amount of sustainable bandwidth for VBR traffic
class. The SCR cannot be greater than the link speed:
3620 for T1, 4800 for E1, 105500 for T3 (96000 for PLCP), 81040 for E3.rodeprecated INTEGER .1.3.6.1.4.1.449.2.1.2.1.3.10.1.10 |
atmSCfgMaximumBustSizeMaximum burst size for VBR traffic in cellsrodeprecated INTEGER .1.3.6.1.4.1.449.2.1.2.1.3.10.1.11 |
cdx6500Statistics OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3 |
cdx6500StatProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1 |
cdx6500PSTPortProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1.1 |
cdx6500PPSTATMPStatsTable OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1.1.36 |
cdx6500PPSTATMPortTableThis table contains ATM Port Statistics parameters. SEQUENCE OF Cdx6500PPSTATMPortEntry .1.3.6.1.4.1.449.2.1.3.1.1.36.1 |
cdx6500PPSTATMPortEntryEntries in the ATM Port Statistics Table. Cdx6500PPSTATMPortEntry .1.3.6.1.4.1.449.2.1.3.1.1.36.1.1 |
atmPStatsPortNumberThe port number of the ATM port.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.36.1.1.1 |
atmPStatsPortTypePort type of this port.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.36.1.1.2 |
atmPStatsPortStatusSpecifies the current port status.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.36.1.1.3 |
cdx6500PPSTATMDataSummaryTableThis table contains ATM Port Data Summary
Statistics parameters. SEQUENCE OF Cdx6500PPSTATMDataSummaryEntry .1.3.6.1.4.1.449.2.1.3.1.1.36.2 |
cdx6500PPSTATMDataSummaryEntryEntries in the ATM Port Data Summary Statistics Table. Cdx6500PPSTATMDataSummaryEntry .1.3.6.1.4.1.449.2.1.3.1.1.36.2.1 |
atmDataSummPortNumberThe port number of the ATM port.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.1 |
atmPStatsOctetsInTotalNumber of characters received since last boot or statistics
reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.2 |
atmPStatsOctetsOutTotalNumber of characters transmitted since last boot or statistics
reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.3 |
atmPStatsOctetsInPerSecAverage number of characters received per second.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.4 |
atmPStatsOctetsOutPerSecAverage number of characters transmitted per second.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.5 |
atmPStatsFramesInTotalNumber of frames received since last boot or statistics
reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.6 |
atmPStatsFramesOutTotalNumber of frames transmitted since last boot or statistics
reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.7 |
atmPStatsFramesInPerSecAverage number of frames received per second.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.8 |
atmPStatsFramesOutPerSecAverage number of frames transmitted per second.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.9 |
atmPStatsOAMCellInTotalNumber of OAM Cells received since last boot or statistics.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.10 |
atmPStatsOAMCellOutTotalNumber of OAM Cells transmitted since last boot or statistics.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.11 |
atmPStatsATMCellInTotalNumber of ATM Cells received since last boot or statistics.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.12 |
atmPStatsATMCellOutTotalNumber of ATM Cells transmitted since last boot or statistics.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.13 |
atmPStatsErrorCellCorHEC(Cor) errors in Physical Layer.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.14 |
atmPStatsErrorCellDisHEC(Dis) errors in Physical Layer.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.15 |
atmPStatsCellDelineateStateATM Physical Layer state.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.16 |
atmPStatsCellStateChangeTimeThe state change time in ATM Physical Layer.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.17 |
atmPStatsDiscardedFramesThe total number of dicarded frames.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.18 |
cdx6500PSTStationProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1.3 |
cdx6500SPSTATMSStatsTable OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1.3.11 |
atmSGenStatsTableThis table contains ATM Station Statistics parameters. SEQUENCE OF Cdx6500atmSGenStatsEntry .1.3.6.1.4.1.449.2.1.3.1.3.11.1 |
cdx6500atmSGenStatsEntryEntries in the ATM Station Statistics Table. Cdx6500atmSGenStatsEntry .1.3.6.1.4.1.449.2.1.3.1.3.11.1.1 |
atmSGenStatsPortNumberThe ATM port number corresponding to this station.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.11.1.1.1 |
atmSGenStatsStnNumberThe number of the ATM Station.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.11.1.1.2 |
atmSStatsStnStatusStatus of the station.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.3.11.1.1.3 |
atmSStatsVPIThe VPI of ATM Station.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.11.1.1.4 |
atmSStatsVCIThe VCI of the ATM Station.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.11.1.1.5 |
atmSStatsAdmStateThe VCI of the ATM Station.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.3.11.1.1.6 |
atmSStatsPeerThe Peer state of the ATM Station.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.11.1.1.7 |
atmSStatsAdjacentThe Adjacent state of the ATM Station.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.11.1.1.8 |
atmSDataSummaryStatsTableThis table contains ATM Station Data Summary Statistics
parameters. SEQUENCE OF Cdx6500atmSDataSummaryStatsEntry .1.3.6.1.4.1.449.2.1.3.1.3.11.2 |
cdx6500atmSDataSummaryStatsEntryEntries in the ATM Station Data Summary Statistics Table. Cdx6500atmSDataSummaryStatsEntry .1.3.6.1.4.1.449.2.1.3.1.3.11.2.1 |
atmSDataSummStatsPortNumberThe ATM port number corresponding to this station.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.1 |
atmSDataSummStatsStnNumberThe number of the ATM station.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.2 |
atmSStatsOctetsInTotalNumber of characters received since last node boot or
statistics reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.3 |
atmSStatsOctetsOutTotalNumber of characters transmitted since last node boot or
statistics reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.4 |
atmSStatsFrameInTotalNumber of frames transmitted since last node boot
or statistics reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.5 |
atmSStatsFrameOutTotalNumber of frames transmitted since last node boot or
statistics reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.6 |
atmSStatsF5CellInTotalNumber of F5 Cells received since last node boot
or statistics reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.7 |
atmSStatsF5CellOutTotalNumber of F5 Cells transmitted since last node boot or
statistics reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.8 |
atmSStatsAISCellInTotalNumber of AIS Cells received since last node boot
or statistics reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.9 |
atmSStatsRDICellInTotalNumber of RDI Cells received since last node boot
or statistics reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.10 |
atmSStatsRDICellOutTotalNumber of RDI Cells transmitted since last node boot or
statistics reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.11 |
atmSStatsCCCellInTotalNumber of CC Cells received since last node boot
or statistics reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.12 |
atmSStatsCCCellOutTotalNumber of CC Cells transmitted since last node boot or
statistics reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.13 |
atmSStatsVCFailureThe state of VC Failures.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.14 |
atmSStatsVCAssuranceStateThe state of VC AssuranceState.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.15 |
atmSStatsOctetsInPerSecThe number of Octests in per second.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.16 |
atmSStatsOctetsOutPerSecThe number of Octests out per second.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.17 |
atmSStatsFramesInPerSecThe number of frames in per second.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.18 |
atmSStatsFramesOutPerSecThe number of frames out per second.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.19 |
atmSStatsDiscardedFramesThe total number of frames discarded.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.20 |
atmSStatsCIBitInForIWFThe total number of CI Bit in.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.21 |
atmSStatsCIBitOutForIWFThe total number of CI Bit out.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.22 |
atmSStatsCLPBitInForIWFThe total number of CLP Bit in.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.23 |
atmSStatsCLPBitOutForIWFThe total number of CLP Bit out.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.24 |
atmSStatsUUBitInForIWFThe total number of UU Bit in.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.25 |
atmSStatsUUBitOutForIWFThe total number of UU Bit out.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.26 |
cdx6500Controls OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.4 |
cdx6500ContATMTable OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.4.24 |
cdx6500ATMPContTableControl parameters for ATM ports. SEQUENCE OF Cdx6500ATMPContEntry .1.3.6.1.4.1.449.2.1.4.24.1 |
cdx6500ATMPContEntryEach control applies to a single ATM port. Cdx6500ATMPContEntry .1.3.6.1.4.1.449.2.1.4.24.1.1 |
atmPContPortNumberPort number of the ATM port. INTEGER .1.3.6.1.4.1.449.2.1.4.24.1.1.1 |
atmPContPortControlControl operations for the specified ATM port.
boot - Boots the ATM port
resetstats - Resets the ATM port statistics.rw Enumeration .1.3.6.1.4.1.449.2.1.4.24.1.1.2 |
cdx6500ATMSContTableControl parameters for ATM stations. SEQUENCE OF Cdx6500ATMSContEntry .1.3.6.1.4.1.449.2.1.4.24.2 |
cdx6500ATMSContEntryEach control applies to a single ATM station. Cdx6500ATMSContEntry .1.3.6.1.4.1.449.2.1.4.24.2.1 |
atmSContPortNumberThe ATM port number corresponding to this station. INTEGER .1.3.6.1.4.1.449.2.1.4.24.2.1.1 |
atmSContStnNumberATM station number. INTEGER .1.3.6.1.4.1.449.2.1.4.24.2.1.2 |
atmSContStnControlControl operations for the specified ATM station.
boot - Boots the ATM station
resetstats - Resets the ATM station statistics.rw Enumeration .1.3.6.1.4.1.449.2.1.4.24.2.1.3 |