ATM-FORUM-AUTO-CONFIG
AI MIB Summary
Standard SNMP MIB module defining data structures for ATM-FORUM-AUTO-CONFIG.
95
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
95 total| Object Name |
|---|
atmfAtmServiceConfFailThe user-side IME will send this trap whenever it is unable to configure itself based on the information provided in the ILMI auto-configuration MIB. The variables included in the trap identify the reason for the failure and the row in the MIB table that caused the failure. NOTIFICATION-TYPE .1.3.6.1.4.1.353.0.3 |
atmfAutoConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.353.2.12 |
atmfAtmServiceTypeTableThe ATM Forum ILMI Auto Configuration Extension ATM Service Type Information. SEQUENCE OF AtmfAtmServiceTypeEntry .1.3.6.1.4.1.353.2.12.1 |
atmfAtmServiceTypeEntryAn entry in the service type table describes the reference information about a service that may be associated with individual ATM connections for the purpose of auto- configuration. This information describe the name and sub- name of the service, the client layer protocol using the ATM service, the TM 4.0 service category, and the TM 4.0 conformance definition. AtmfAtmServiceTypeEntry .1.3.6.1.4.1.353.2.12.1.1 |
atmfAtmServiceTypeIndexA number between which identifies the entry in the Service Type Table.ro INTEGER .1.3.6.1.4.1.353.2.12.1.1.1 |
atmfAtmServiceProviderNameThis string identifies the name of the service provider for the service described in this profile. The value of this attribute should not set to NULL.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.353.2.12.1.1.2 |
atmfAtmServiceNameThis string identifies the name of the service described in this profile. The value of this attribute should not be set to NULL.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.353.2.12.1.1.3 |
atmfAtmServiceSubNameThis string identifies the sub-name of the service described in this profile. A Service may have zero or more sub-names, each with its own service type profile.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.353.2.12.1.1.4 |
atmfAtmServiceClientThis string identifies the client protocol of the service described in this profile. A Service (sub-service) may have zero or more described client, each with its own service type profile.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.353.2.12.1.1.5 |
atmfAtmServiceTMCategoryThe TM 4.0 Service category used for this service type. Indicates CBR, rt-VBR, nrt-VBR, ABR, UBR, (or GFR)ro Enumeration .1.3.6.1.4.1.353.2.12.1.1.6 |
atmfAtmServiceTMConformanceDefThe TM 4.1 conformance definition used for this service type. Indicates CBR.1, VBR.1, VBR.2, VBR.3, UBR.1, UBR.2, ABR, GFR.1, or GFR.2.ro Enumeration .1.3.6.1.4.1.353.2.12.1.1.7 |
atmfAtmServiceConnInfoTableThe ATM Forum ILMI Auto Configuration Extension ATM Service Connection Information. SEQUENCE OF AtmfAtmServiceConnInfoEntry .1.3.6.1.4.1.353.2.12.2 |
atmfAtmServiceConnInfoEntryAn entry in the service connection information table describes the ATM connection that provides a service across an ATM interface. The connection is identified by port and VPI/VCI value. Information about the connection includes the connection type (VP or VC, SVC or PVC), and the association of the connection with a service type. Specific connection information, such as traffic descriptors, should be accessed in the atmfVpc and atmfVcc tables defined in ILMI. AtmfAtmServiceConnInfoEntry .1.3.6.1.4.1.353.2.12.2.1 |
atmfAtmServicePortIndexThe value of 0 (zero)has the special meaning of identifying the ATM Interface over which this ILMI message was received.ro INTEGER .1.3.6.1.4.1.353.2.12.2.1.1 |
atmfAtmServiceVpiThe VPI value of the ATM service connection at the local ATM interface.ro INTEGER .1.3.6.1.4.1.353.2.12.2.1.2 |
atmfAtmServiceVciThe VCI value of the ATM service connection at the local ATM interface. If the atmfAtmServiceSignalId indicates that the connection is a VP connection, the value of this attribute shall be set to 0 (zero) and any meaning of this attribute ignored.ro INTEGER .1.3.6.1.4.1.353.2.12.2.1.3 |
atmfAtmServiceSignalIdThis attribute represents the characteristic information of the layer network domain. It may be set to either VC characteristic information (vcCI) or VP characteristic information (vpCI).ro Enumeration .1.3.6.1.4.1.353.2.12.2.1.4 |
atmfAtmServiceConnServiceIndexThe value of this object identifies the row in the atmfAtmServiceTypeTable. This entry represents the association between an ATM service connection and an ATM service type profile that describes it.ro INTEGER .1.3.6.1.4.1.353.2.12.2.1.5 |
atmfAtmServiceConnNameThis string identifies the name of the service connection. The value of this attribute may be set to NULL.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.353.2.12.2.1.6 |
atmfAtmServiceConnAALTypeDescribes the AAL Type of the ATM service connection. A value of none indicates that no AAL is used. The AAL types include AAL1, AAL 3/4, and AAL 5. The value other may be a user-defined AAL type. The unknown type indicates that the AAL type cannot be determined.ro Enumeration .1.3.6.1.4.1.353.2.12.2.1.7 |
atmfAtmServiceConnAALIndexThe value of this object identifies the row in the atmfAAL1ProfileTable for AAL 1 connection, the atmfAAL34ProfileTable for AAL3/4 connection, and the atmfAAL5ProfileTable for AAL 5 connections. This entry represents the association between an ATM service connection and an ATM Adaptation Layer profile that describes it.ro INTEGER .1.3.6.1.4.1.353.2.12.2.1.8 |
atmfAAL1ProfileTableThe ATM Forum ILMI Auto Configuration Extension AAL1 Profile Information. SEQUENCE OF AtmfAAL1ProfileEntry .1.3.6.1.4.1.353.2.12.3 |
atmfAAL1ProfileEntryAn entry in the AAL1 Profile table provides data that describes the AAL1 processing function. AtmfAAL1ProfileEntry .1.3.6.1.4.1.353.2.12.3.1 |
atmfAAL1ProfileIndexA number between which identifies the entry in the AAL1 Profile Table.ro INTEGER .1.3.6.1.4.1.353.2.12.3.1.1 |
atmfAAL1SubtypeThis attribute describes AAL type 1 subtype used by the CBR service application (e.g. 64 KBPS voice band signal transport, circuit transport).ro Enumeration .1.3.6.1.4.1.353.2.12.3.1.2 |
atmfAAL1CBRRateThis attribute describes the rate of the CBR service supported by the AAL.ro INTEGER .1.3.6.1.4.1.353.2.12.3.1.3 |
atmfAAL1ClkRecoveryTypeThis attribute indicates whether the clock recovery type is synchronous, asynchronous-SRTS(Synchronous Residual Time Stamp), or asynchronous-Adaptive Clock Recovery.ro Enumeration .1.3.6.1.4.1.353.2.12.3.1.4 |
atmfAAL1FECThis attribute indicates the FEC method: no FEC, FEC for Loss Sensitive Signal Transport, or FEC for Delay Sensitive Signal Transport.ro Enumeration .1.3.6.1.4.1.353.2.12.3.1.5 |
atmfAAL1SDTThis attribute indicates whether Structured Data Transfer (SDT) has been configured at the AAL. A value of TRUE means SDT has been selected. This attribute value can be set to TRUE only when the Forward Error Correction Type attribute equals noFEC.ro Enumeration .1.3.6.1.4.1.353.2.12.3.1.6 |
atmfAAL1PartiallyFilledCellsThis attribute identifies the number of leading octets in use.ro INTEGER .1.3.6.1.4.1.353.2.12.3.1.7 |
atmfAAL1CellLossIntegrPeriodThis attribute represents the time in milliseconds for the cell loss integration period. If cells are lost for this period of time, the Interworking VCC Termination Point entity will generate a cell starvation alarm.ro INTEGER .1.3.6.1.4.1.353.2.12.3.1.8 |
atmfAAL34ProfileTableThe ATM Forum ILMI Auto Configuration Extension AAL3/4 Profile Information. SEQUENCE OF AtmfAAL34ProfileEntry .1.3.6.1.4.1.353.2.12.4 |
atmfAAL34ProfileEntryAn entry in the AAL34 Profile table provides data that describes the AAL3/4 processing function. AtmfAAL34ProfileEntry .1.3.6.1.4.1.353.2.12.4.1 |
atmfAAL34ProfileIndexA number between which identifies the entry in the AAL3/4 Profile Table.ro INTEGER .1.3.6.1.4.1.353.2.12.4.1.1 |
atmfAAL34MaxCpcsSduSizeForwardThis attribute represents the maximum CPCS_PDU size that will be transmitted over the connection in both the incoming (forward) direction of transmission.ro INTEGER .1.3.6.1.4.1.353.2.12.4.1.2 |
atmfAAL34MaxCpcsSduSizeBackwardThis attribute represents the maximum CPCS_PDU size that will be transmitted over the connection in both the outgoing (backward) direction of transmission.ro INTEGER .1.3.6.1.4.1.353.2.12.4.1.3 |
atmfAAL34MIDRangeLowThis attribute represents the low value of MID supported at the AAL for the supporting VCC.ro INTEGER .1.3.6.1.4.1.353.2.12.4.1.4 |
atmfAAL34MIDRangeHighThis attribute represents the high value of MID supported at the AAL for the supporting VCC.ro INTEGER .1.3.6.1.4.1.353.2.12.4.1.5 |
atmfAAL34AALModeThis attribute indicates whether the AAL for the supporting VCC is operating in message mode or streaming mode, assured or unassured.ro Enumeration .1.3.6.1.4.1.353.2.12.4.1.6 |
atmfAAL34SscsTypeThis attribute identifies the SSCS type for the AAL. Valid values are NULL, Data SSCS based on SSCOP (assured operation), Data SSCS based on SSCOP (non-assured operation), or Frame Relay SSCSro Enumeration .1.3.6.1.4.1.353.2.12.4.1.7 |
atmfAAL5ProfileTableThe ATM Forum ILMI Auto Configuration Extension AAL5 Profile Information. SEQUENCE OF AtmfAAL5ProfileEntry .1.3.6.1.4.1.353.2.12.5 |
atmfAAL5ProfileEntryAn entry in the AAL5 Profile table provides data that describes the AAL5 processing function. AtmfAAL5ProfileEntry .1.3.6.1.4.1.353.2.12.5.1 |
atmfAAL5ProfileIndexA number between which identifies the entry in the AAL5 Profile Table.ro INTEGER .1.3.6.1.4.1.353.2.12.5.1.1 |
atmfAAL5MaxCpcsSduSizeForwardThis attribute represents the maximum CPCS_PDU size that will be transmitted over the connection in both the incoming (forward) direction of transmission.ro INTEGER .1.3.6.1.4.1.353.2.12.5.1.2 |
atmfAAL5MaxCpcsSduSizeBackwardThis attribute represents the maximum CPCS_PDU size that will be transmitted over the connection in both the outgoing (backward) direction of transmission.ro INTEGER .1.3.6.1.4.1.353.2.12.5.1.3 |
atmfAAL5AALModeThis attribute indicates whether the AAL for the supporting VCC is operating in message mode or streaming mode, assured or unassured.ro Enumeration .1.3.6.1.4.1.353.2.12.5.1.4 |
atmfAAL5SscsTypeThis attribute identifies the SSCS type for the AAL. Valid values are NULL, Data SSCS based on SSCOP (assured operation), Data SSCS based on SSCOP (non-assured operation), or Frame Relay SSCSro Enumeration .1.3.6.1.4.1.353.2.12.5.1.5 |
atmfAAL2CommonProfileTableThe ATM Forum ILMI Auto Configuration Extension AAL2 Profile Information. This table contains AAL2 parameters that are common to all AAL2 applications. These parameters are taken from I.363.2, I.366.1 and I.366.2 SEQUENCE OF AtmfAAL2CommonProfileEntry .1.3.6.1.4.1.353.2.12.6 |
atmfAAL2CommonProfileEntryAn atmfAAL2CommonProfileEntry provides AAL2 common parameters of operation that are to be used by the PVC associated with this entry. AtmfAAL2CommonProfileEntry .1.3.6.1.4.1.353.2.12.6.1 |
atmfAAL2ProfileIndexA number which uniquely identifies the entry in the AAL2 Profile Table.ro INTEGER .1.3.6.1.4.1.353.2.12.6.1.1 |
atmfAAL2ApplicationIdentifierThe application identifier specifies which AAL2 application is using the PVC. In addition it specifies protocol combinations to be used on AAL2 channels between IWFs, i.e. it implicitly configures the use of I.366.1 or I.366.2 for bearer and signalling AAL2 channels. The value of this object should be one of those values given in the administered list of AppIds for AAL2 Applications in section 5 of the ATM Forum document of well-known addresses and assigned codes which can be located at vhttp://www.atmforum.com/atmforum/specs/public_assigned_codes.pdf.ro INTEGER .1.3.6.1.4.1.353.2.12.6.1.2 |
atmfAAL2ConfigResponsibilityThis object identifies which management channel is responsible for AAL2 provisioning and auto-configuration. The user-side IME must check the value of this parameter first before configuring the AAL2 for the PVC to determine whether or not this responsibility lies with ILMI. ilmi - if this is selected then the user-side IME must use the AAL2 Profile defined in this entry and associated AAL2 Profile extension table entry to auto-configure the AAL2 for the PVC. lesEoc - if this is selected then the user-side IME must not auto-configure the AAL2 using ILMI. The AAL2 Profile parameters do not need to be provisioned by the network- side IME and with the exception of this object the AAL2 profile parameters in the ILMI MIB are not applicable. The Loop Emulation Service Embedded Operations Channel (LES EOC) shall be used to provision the AAL2 for the PVC. The start-up AAL2 parameters for this PVC must assume the default values specified in the af-vmoa-0145.000 MIB such that the LES EOC is operational. other - if this is selected then the user-side IME must not auto-configure the AAL2 using ILMI. The AAL2 Profile parameters do not need to be provisioned by the network- side IME and with the exception of this object the AAL2 profile parameters in the ILMI MIB are not applicable. Another mechanism will be used to provision the AAL2 at the ATU-R for the PVC.ro Enumeration .1.3.6.1.4.1.353.2.12.6.1.3 |
atmfAAL2CpsMaxMultiplexedChannelsMaximum number of multiplexed channels.ro INTEGER .1.3.6.1.4.1.353.2.12.6.1.4 |
atmfAAL2CpsMaxSduLengthMaximum CPS-SDU size given in octets. This parameter is bidirectional, i.e. its value applies to both directions of the AAL2 connection.ro INTEGER (45 | 64) .1.3.6.1.4.1.353.2.12.6.1.5 |
atmfAAL2SscsMaxSssarSduLengthThis is the maximum size and SSSAR-SDU can take as defined in I.366.1. This parameter only applies to those AAL2 channels using I.366.1 SSSAR. This parameter is bidirectional, i.e its value applies to both directions of the AAL2 connection. Note that if the appID indicates Loop Emulation Service as the AAL2 application then the minimum allowable value of this parameter is 493.ro INTEGER .1.3.6.1.4.1.353.2.12.6.1.6 |
atmfAAL2SscsSstedStatusThis specifies whether the SSTED service is used or not. If the value of this object is 'selected' then I.366.1 SSSAR must be supported by the AAL2. This parameter only applies to those AAL2 channels using I.366.1 SSSAR.ro Enumeration .1.3.6.1.4.1.353.2.12.6.1.7 |
atmfAAL2SscsSsadtStatusThis specifies whether SSADT service is used or not. Note that if the value of this object is 'selected' then I.366.1 SSSAR must be supported and by implication the SSTED service must also be 'selected'. This parameter only applies to those AAL2 channels using I.366.1 SSSAR.ro Enumeration .1.3.6.1.4.1.353.2.12.6.1.8 |
atmfAAL2SscsServiceCategoryThis object describes the type of service category supported by this AAL2 PVC.ro Enumeration .1.3.6.1.4.1.353.2.12.6.1.9 |
atmfAAL2SscsAudioServiceTransportThis object describes whether the Audio Service that is used for transporting voice and voiceband data is enabled or disabled.ro Enumeration .1.3.6.1.4.1.353.2.12.6.1.10 |
atmfAAL2SscsProfileSourceThis attribute describes the source of the profile.ro Enumeration .1.3.6.1.4.1.353.2.12.6.1.11 |
atmfAAL2SscsIeeeOuiThis attribute contains the IEEE Organizationally Unique Identifier (OUI) of the organisation that specified the profile being used, if other than ITU-T. For example, if the source is the ATM Forum, the value of this object is 00A03E. This attribute is only meaningful if atmfAAL2SccsProfileSource has the value 'other'.ro INTEGER .1.3.6.1.4.1.353.2.12.6.1.12 |
atmfAAL2SscsPredefinedProfileIdentifierThis object describes the predefined profile identifier.ro INTEGER .1.3.6.1.4.1.353.2.12.6.1.13 |
atmfAAL2SscsPcmEncodingThis object describes the type of PCM encoding used.ro Enumeration .1.3.6.1.4.1.353.2.12.6.1.14 |
atmfAAL2SscsFaxDemodulationTransportThis object describes whether transport of demodulated facsimile data is enabled or disabled.ro Enumeration .1.3.6.1.4.1.353.2.12.6.1.15 |
atmfAAL2SscsCasSignalingTransportThis attribute describes whether transport of CAS signaling bits is enabled or disabled.ro Enumeration .1.3.6.1.4.1.353.2.12.6.1.16 |
atmfAAL2SscsDtmfDigitPacketTransportThis attribute describes whether transport of DTMF dialled digits is enabled or disabled.ro Enumeration .1.3.6.1.4.1.353.2.12.6.1.17 |
atmfAAL2SscsMfR1DigitPacketTransportThis object describes whether transport of MF-R1 dialled digits is enabled or disabled.ro Enumeration .1.3.6.1.4.1.353.2.12.6.1.18 |
atmfAAL2SscsMfR2DigitPacketTransportThis object describes whether transport of MF-R2 dialled digits is enabled or disabled.ro Enumeration .1.3.6.1.4.1.353.2.12.6.1.19 |
atmfAAL2SscsCircuitModeDataTransportThis object describes whether transport of circuit mode data is enabled or disabled.ro Enumeration .1.3.6.1.4.1.353.2.12.6.1.20 |
atmfAAL2SscsCircuitModeDataNumChannelsThis object describes the multiplier N in N*64kbit/s circuit mode data. It is only applicable if the value of atmfAAL2SscsCircuitModeDataTransport is 'enabled'.ro INTEGER .1.3.6.1.4.1.353.2.12.6.1.21 |
atmfAAL2SscsFrameModeDataTransportThis object describes whether the I.366.2 frame mode data service is enabled or disabled.ro Enumeration .1.3.6.1.4.1.353.2.12.6.1.22 |
atmfAAL2SscsFrameModeDataMaxLengthThis object specifies the maximum length of I.366.2 frame mode data. It is only applicable if the value of atmfAAL2FrameModeDataTransport is 'enabled'.ro INTEGER .1.3.6.1.4.1.353.2.12.6.1.23 |
atmfAAL2SscopSduLengthThe Maximum SSCOP-SDU length. This object is only required is the value of atmfAAL2SscsSsadtStatus is selected else it is not applicable.ro INTEGER .1.3.6.1.4.1.353.2.12.6.1.24 |
atmfAAL2SscopUuFieldLengthThe Maximum SSCOP-UU field length. This object is only required is the value of atmfAAL2SscsSsadtStatus is selected else it is not applicable.ro INTEGER .1.3.6.1.4.1.353.2.12.6.1.25 |
atmfAAL2TrunkingProfileTableThe ATM Forum ILMI Auto Configuration Extension AAL2 Profile Information. This table contains AAL2 parameters that are specific to the ATM Trunking AAL 2 application. These parameters are taken from af-vtoa-0113.000 SEQUENCE OF AtmfAAL2TrunkingProfileEntry .1.3.6.1.4.1.353.2.12.7 |
atmfAAL2TrunkingProfileEntryAn atmfAAL2TrunkingProfileEntry provides AAL2 parameters of operation for ATM Trunking applications to be used in addition to those provided in the Common AAL2 Profile Table. These together provide complete configuration of AAL2 for PVCs that support ATM Trunking using AAl2 as defined in af-vtoa-0113.000. AtmfAAL2TrunkingProfileEntry .1.3.6.1.4.1.353.2.12.7.1 |
atmfAAL2VcciThis object uniquely identifies a PVC between IWFs.ro INTEGER .1.3.6.1.4.1.353.2.12.7.1.1 |
atmfAAL2SignalingVcciThis object specifies the VCCI of the PVC that is used to carry the CCS for this PVC.ro INTEGER .1.3.6.1.4.1.353.2.12.7.1.2 |
atmfAAL2LESProfileTableThe ATM Forum ILMI Auto Configuration Extension AAL2 Profile Information. This table contains AAL2 parameters that are specific to the ATM LES AAL 2 application. These parameters are taken from af-vmna-0145.000 SEQUENCE OF AtmfAAL2LESProfileEntry .1.3.6.1.4.1.353.2.12.8 |
atmfAAL2LESProfileEntryAn atmfAAL2LESProfileEntry provides AAL2 parameters of operation for LES applications to be used in addition to those provided in the Common AAL2 Profile Table. These together provide complete configuration of AAL2 for PVCs that support LES using AAl2 as defined in af-vmoa-0145.000. AtmfAAL2LESProfileEntry .1.3.6.1.4.1.353.2.12.8.1 |
atmfAAL2CpsCIDLowerLimitThe minimum value the CID can take for AAL2 bearer channels and ISDN-D channels.ro INTEGER .1.3.6.1.4.1.353.2.12.8.1.1 |
atmfAAL2CpsCIDUpperLimitThe maximum value the CID can take for AAL2 bearer channels and ISDN-D channels.ro INTEGER .1.3.6.1.4.1.353.2.12.8.1.2 |
atmfAAL2CpsOptimisationThis object refers to the mode of operation of the CPS on the CP-IWF The value of this object imposes a restriction on the CPS-SDU length and hence must override the value of atmfAAl2CpsMaxSDULength. singleCpsPacketPerCpsPduNoOverlap -A single CPS Packet is contained within a CPS-PDU and no overlap can occur into the next CPS-PDU. If this option is selected, then Timer_CU is not applicable. Also Max CPS-SDU size must be less than or equal to 44. multipleCpsPacketsPerCpsPduWithOverlap - Multiple CPS Packets are contained within a CPS-PDU and overlap can occur into the next CPS-PDU. If this option is selected, then Timer_CU is applicable. Also Max CPS-SDU size must be less than or equal to 64.ro Enumeration .1.3.6.1.4.1.353.2.12.8.1.3 |
atmfAtmServiceConnInfoExtensionTableThe ATM Forum ILMI Auto Configuration Extension ATM Service Connection Information. SEQUENCE OF AtmfAtmServiceConnInfoExtensionEntry .1.3.6.1.4.1.353.2.12.9 |
atmfAtmServiceConnInfoExtensionEntryAn entry in the service connection information extension table provides additional elements that help describe the ATM connection that provides a service across an ATM interface. The connection is identified by port and VPI/VCI value. AtmfAtmServiceConnInfoExtensionEntry .1.3.6.1.4.1.353.2.12.9.1 |
atmfAtmServicePhyMacIdentifierWhen the physical and/or MAC layer has more than one PHY-connection or MAC-connection, this object is used to select the PHY- or MAC-connection to be bound to the PVC. The semantics of the value of this object is PHY and/or MAC specific. This semantics generally shall be specified with the PHY or MAC. However, the semantics for the two PHY/MAC specifications which have been identified as having multiple connections is provided here for convenience: When the physical layer is dual latency ADSL, the PhyMacIdentifier selects the latency path to be bound to each direction of transmission for the PVC. The value of the PhyMacIdentifier shall be as follows: default = 0 upstream and downstream both interleaved path = 1 upstream and downstream both fast path = 2 upstream interleaved path, downstream fast path = 3 upstream fast path, downstream interleaved path = 4 The 'default' value shall be used for single latency ADSL PHYs. When the physical and MAC layers are IEEE 802.14, the PhyMacIdentifier specifies the 802.14 Local Identifier for the PVCro INTEGER .1.3.6.1.4.1.353.2.12.9.1.1 |
atmfAtmServiceTypeExtensionTableThe ATM Forum ILMI Auto Configuration Extension ATM Service Type Extension Information. SEQUENCE OF AtmfAtmServiceTypeExtensionEntry .1.3.6.1.4.1.353.2.12.10 |
atmfAtmServiceTypeExtensionEntryAn entry in the service type extension table describes additional information about a service that may be associated with individual ATM connections for the purpose of auto-configuration. This information describes the Client Protocol ID's associated with a particular service. AtmfAtmServiceTypeExtensionEntry .1.3.6.1.4.1.353.2.12.10.1 |
atmfAtmServiceLayer2ProtocolIdThis object shall be used to select the user plane layer 2 protocol (if any) to be used above the AAL. The first octet of this object shall be encoded as follows. Bits 5-7 (i.e. the three most significant bits) shall be set to 0; any other values shall be ignored. Bits 0-4 (i.e. the five least significant bits) shall be encoded as shown in the entry for 'User information layer 2 protocol (octet 6)' in Table 4-10/Q.2931. However, if no user plane layer 2 protocol is present above the AAL, then the first (and only) octet shall be encoded as '0b00000000'. If the encoding of the first octet requires subsequent octets, then bit 7 (i.e., the most significant bit) of each of these octets shall be set to 0; however, if it is set to 1, it shall be ignored. Bits 0-6 shall be encoded according to table 4-10/Q.2931. If more than one subsequent octet is needed, then octets shall appear in the order shown in figure 4-16/Q.2931.ro OCTET STRING .1.3.6.1.4.1.353.2.12.10.1.1 |
atmfAtmServiceLayer3ProtocolIdThis object shall be used to select a user plane layer 3 protocol (or user plane layer 2 bridging). The first octet of this object shall be encoded as follows. Bits 5-7 (i.e., the three most significant bits) shall be set to 0; any other values shall be ignored. Bits 0-4 (i.e., the five least significant bits) shall be encoded as shown in the entry for 'User information layer 3 protocol (octet 7)' in Table 4-10/Q.2931. However, if no user plane layer 3 protocol is specified, then the first (and only) octet shall be encoded as '0b00000000'. a) If ISO TR9577 network layer protocol identification is to be used, then the first octet shall be encoded to indicate 'ISO/IEC TR9577'. In this case, either: i) the user plane layer 3 protocol is to be selected in the management plane. The second octet of this object shall contain the ISO/IEC TR9577 Initial Protocol Identifier (IPI). - For layer 3 protocols for which ISO/IEC has assigned a Network Layer Protocol Identifier (NLPID), then this NLPID shall be used as the IPI, and the length of the octet string shall be 2. - For layer 3 protocols for which ISO/IEC has not assigned an NLPID, the IPI shall be encoded to indicate 'IEEE 802.1a SNAP identifier' (see Annex D of ISO/IEC 9577). The following five octets (octets 3 through 7) of this object shall then contain a SNAP identifier, which consists of a 3-octet organization unique identifier (OUI) and a 2-octet protocol identifier (PID). This SNAP coding shall be used only if ISO/IEC has not assigned a Network Layer Protocol Identifier for the layer 3 or layer 2 protocol. The octet string shall thus be 7 octets long. - If an IME wishes to indicate that bridged LAN frames are to be carried in the user plane then the IPI shall be encoded to indicate 'IEEE 802.1a SNAP identifier'. The following five octets of this object shall contain a SNAP identifier, which indicates the bridged protocol. For consistency with SIG 4.0, use of the ISO/IEC subsequent protocol identifier (SPI) is not recommended but not explicitly prohibited as one can envision scenarios where it has utility. or ii) the user plane layer 3 protocol is to be selected using network layer protocol identification in the user plane. The octet-string shall be one octet long. The first octet(s) of each layer 3 protocol data unit shall contain layer 3 protocol identification according to ISO/IEC TR9577. b)If bits 0-4 of the first octet of the octet string are set to any value other than 'ISO/IEC TR9577', then any subsequent octets shall be encoded as follows. Bit 7 (i.e., the most significant bit) of each of these octets shall be set to 0; however, if it is set to 1, it shall be ignored. Bits 0-6 shall be encoded according to the codings for octet 7a, octet 7b and octet 7c specified in table 4- 10/Q.2931. If more than one subsequent octet is needed, then octets shall appear in the order shown in figure 4-16/Q.2931.ro OCTET STRING .1.3.6.1.4.1.353.2.12.10.1.2 |
atmfAAL5ProfileExtensionTableAdditional parameters for the AAL5 Profile are stored in this table. SEQUENCE OF AtmfAAL5ProfileExtensionEntry .1.3.6.1.4.1.353.2.12.11 |
atmfAAL5ProfileExtensionEntryAn entry in this table augments an entry in the atmfAAL5ProfileTable AtmfAAL5ProfileExtensionEntry .1.3.6.1.4.1.353.2.12.11.1 |
atmfAAL5VcciThis object's value is only applicable if the AAL5 VCC is carrying CCS for AAL2 narrowband calls.ro INTEGER .1.3.6.1.4.1.353.2.12.11.1.1 |
atmfAtmServiceConfFailReasonThe reason for the failure to configure the PVC at the ATU-Rro Enumeration .1.3.6.1.4.1.353.2.12.12 |
atmfAtmServiceConfFailOIDThis object holds a pointer to a row in the appropriate table depending on the value of the atmfAtmServiceFailReason object. This will allow the network side to determine MIB information that caused the auto-configuration failure. The value of this object should be as follows: If atmfAtmServiceConfFailReason = 1 or 2, then this object's value points to the row in the atmfAtmServiceTypeTable that is the cause of the problem. If atmfAtmServiceConfFailReason = 3, then this object's value points to the row in the atmfAALxProfileTable, where x is 1, 2, 34, or 5 depending on the AAL that can't be supported. If atmfAtmServiceConfFailReason = 4, then this object's value points to the row in the atmfAtmServiceConnInfoTable that is the cause of the problem. For any other value of atmfAtmServiceConfFailReason, this object's value should be ignored.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.353.2.12.13 |