ATM-DXI-MIB
Standard SNMP MIB module defining data structures for ATM-DXI-MIB.
Imported Objects
Objects
14 total| Object Name |
|---|
atmForum OBJECT IDENTIFIER .1.3.6.1.4.1.353 |
RFC1155-SMI Unknown .1.3.6.1.4.1.353 |
atmUniDxi OBJECT IDENTIFIER .1.3.6.1.4.1.353.3 |
atmDxi OBJECT IDENTIFIER .1.3.6.1.4.1.353.3.2 |
atmDxiConfTableThis table contains
ATM DXI configuration information
including information on the mode supported
across the DXI. SEQUENCE OF AtmDxiConfEntry .1.3.6.1.4.1.353.3.2.2 |
atmDxiConfEntryThis list contains ATM DXI configuration information. AtmDxiConfEntry .1.3.6.1.4.1.353.3.2.2.1 |
atmDxiConfIfIndexThe value of this object identifies, for SNMP, the ATM DXI
interface for which this entry contains management information.
This is the same value as used to identify the IfEntry describing
the DCE interface. Management uses and expects this value. In
the proxy mode of operation, the DCE always treats this as 0, but
preserves it in its response to the DTE. 0, the DXI value, means
the interface over which the DXI LMI request was received.ro INTEGER .1.3.6.1.4.1.353.3.2.2.1.2 |
atmDxiConfModeThis object identifies the dxi mode being
used at the atm dxi port.rw Enumeration .1.3.6.1.4.1.353.3.2.2.1.3 |
atmDxiDFAConfTableThis table contains configuration information about
a particular DFA. SEQUENCE OF AtmDxiDFAConfEntry .1.3.6.1.4.1.353.3.2.3 |
atmDxiDFAConfEntryThis list contains ATM DXI DFA configuration
information. AtmDxiDFAConfEntry .1.3.6.1.4.1.353.3.2.3.1 |
atmDxiDFAConfIfIndexThe value of this object identifies, for SNMP, the ATM DXI
interface for which this entry contains management information.
This is the same value as used to identify the IfEntry describing
the DCE interface. Management uses and expects this value. In
the proxy mode of operation, the DCE always treats this as 0, but
preserves it in its response to the DTE. 0, the DXI value, means
the interface over which the DXI LMI request was received.ro INTEGER .1.3.6.1.4.1.353.3.2.3.1.1 |
atmDxiDFAConfDfaIndexThis object identifies the DFA instance on the DXI
identified by atmDxiDFAConfIfIndex.ro Dfa .1.3.6.1.4.1.353.3.2.3.1.2 |
atmDxiDFAConfAALTypeThis object identifies the AAL type supported at this DFA.
Note, if mode 2 is supported on the DXI identified by the
corresponding instance of atmDxiDFAConfIfIndex and that
instance of atmDxiDFAConfIfIndex identifies the DCE side
of the DXI, then this object contains the AAL Type being
run on the corresponding VPI/VCI on the corresponding ATM UNI
interface.rw Enumeration .1.3.6.1.4.1.353.3.2.3.1.3 |
atmDxiEnterpriseThis object is included as the first ID-Value pair
in a Trap PDU for which the Generic Trap Type field
has the value 'enterpriseSpecific'. The value of the
object identifies the enterprise under whose authority
the value of the Enterprise Trap Type field is defined. OBJECT IDENTIFIER .1.3.6.1.4.1.353.3.2.4 |
More MIBs from Atm Forum
Browse all Atm ForumMIBs →The PNNI-MIB facilitates the monitoring and management of Private Network-to-Network Interface (PNNI) routing topology, peer groups, and signaling states within Asynchronous Transfer Mode (ATM) networks. It provides access to critical metrics including peer adjacency status, routing database synchronization states, and call admission control parameters for ATM Forum-compliant switches.
ATM-FORUM-SNMP-M4-MIB enables the monitoring and management of Asynchronous Transfer Mode (ATM) network elements via the ATM Forum's M4 interface, specifically tracking physical layer status, virtual circuit (PVC/SVC) states, and traffic statistics for ATM switches and routers.
ATM-FORUM-M4-MIB enables SNMP-based monitoring of Asynchronous Transfer Mode (ATM) network elements by exposing the M4 interface view, specifically tracking physical layer status, virtual path/circuit (VP/VC) connectivity states, and traffic statistics for ATM switches and access nodes.
The MPOA-MIB provides management interfaces for Multiprotocol Over ATM (MPOA) clients and servers, specifically monitoring MPC MPS MAC address mappings and session states. It facilitates the tracking of ATM virtual circuit associations and client-server interactions within legacy MPOA v1.1 environments, utilizing the `mpcMpsMultipleMacAddressTable` to replace the obsolete single-address table.
The ATM-TRACE-MIB facilitates the monitoring and management of Asynchronous Transfer Mode (ATM) network path and connection trace operations, specifically tracking diagnostic data such as trace route hops, connection identifiers, and path status anomalies within ATM switches and routers.
The IMA-MIB facilitates the monitoring and management of ATM Forum Inverse Multiplexing for ATM (IMA) interfaces on legacy ATM network hardware, specifically tracking IMA group states, member link status, and synchronization counters to ensure reliable high-bandwidth aggregation.