APRISAXE-MIB-4RF
AI MIB Summary
The APRISAXE-MIB-4RF module provides SNMP management interfaces for AprisaXE 4RF radio access network equipment, enabling the monitoring of RF channel status, transmit power levels, signal quality metrics, and hardware alarm states. This MIB facilitates the collection of performance counters and fault management data required for maintaining the operational integrity of AprisaXE wireless base stations and repeaters.
MIB for the AprisaXE project
Main OID:
fourRFAprisaXEModule.1.3.6.1.4.1.14817.2.5
1080
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
1080 total| Object Name |
|---|
fourRFAprisaXEModuleMIB for the AprisaXE project MODULE-IDENTITY .1.3.6.1.4.1.14817.2.5 |
aprisaXEConfigThe root of the OID sub-tree for the AprisaXE product configuration. OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1 |
aprisaXEGroupsThe root of the OID sub-tree for the AprisaXE object groups. OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.1 |
aprisaXEObjectsThe root of the OID sub-tree for the AprisaXE product objects. OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2 |
aprisaXETerminal OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.1 |
aprisaXETerminalRfChannelWidthThe terminal RF channel width, the options are:
20kHz, 25kHz, 50kHz, 75kHz, 100kHz, 125kHz, 150kHz, 200kHz, 250kHz,
400kHz, 500kHz, 800kHz,
1MHz, 1.25MHz,
1.75MHz, 2MHz,
3.5MHz, 7MHzrw FourRFChannelWidth (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.1.4 |
aprisaXETerminalRSSIThe terminal RSSI in dBm.ro FourRFRSSI (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.1.5 |
aprisaXETerminalModulationStateThe terminal modulation state.rw FourRFModulationType (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.1.6 |
aprisaXETerminalClockReferenceThe terminal clock reference configuration:
automatic -
manual -rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.1.7 |
aprisaXETerminalClockSourceThe terminal clock source configuration:
network - clocking is recovered from the synchronous network
to which the terminal is connected.
link - clocking is recovered from the remote end of the link.
internal - the clock is generated internally.
The clock reference must be in manual mode for this to take effect.rw FourRFClockSource (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.1.8 |
aprisaXETerminalAlarmStatusThe terminal alarm status, this reflects the overall status of the
terminal. This will match the colour of the front panel control LED.
The states used are noAlarm, minorAlarm and majorAlarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.1.9 |
aprisaXETerminalRxAlarmStatusThe terminal alarm status, this reflects the overall RX status of the
terminal. This will match the colour of the front panel RX LED.
The states used are noAlarm, minorAlarm and majorAlarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.1.10 |
aprisaXETerminalTxAlarmStatusThe terminal alarm status, this reflects the overall TX status of the
terminal. This will match the colour of the front panel TX LED.
The states used are noAlarm, minorAlarm and majorAlarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.1.11 |
aprisaXETerminalBandwidthThis returns the total bandwidth available over the link in kbps.ro Unsigned32 .1.3.6.1.4.1.14817.7.3.1.2.1.12 |
aprisaXEMotherboardSerialNumberThe unique serial number for the motherboard.ro FourRFSerialNumber (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.1.13 |
aprisaXETerminalAllocatedBandwidthThis returns the total bandwidth allocated over the link in kbps.ro Unsigned32 .1.3.6.1.4.1.14817.7.3.1.2.1.14 |
aprisaXETerminalLoopbackBandwidthThis returns the total loopback bandwidth allocated in kbps.ro Unsigned32 .1.3.6.1.4.1.14817.7.3.1.2.1.15 |
aprisaXETerminalNetworkClockPrimaryStatusThis returns the status of the network clock primary source.ro FourRFNetworkClockStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.1.16 |
aprisaXETerminalNetworkClockSecondaryStatusThis returns the status of the network clock secondary source.ro FourRFNetworkClockStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.1.17 |
aprisaXETerminalNetworkClockCommandForces a change in the active network clock.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.1.18 |
aprisaXETerminalStartupCompleteIndicates whether the terminal startup sequence is complete.ro Enumeration .1.3.6.1.4.1.14817.7.3.1.2.1.19 |
aprisaXETerminalImageAlarmClearIndicates whether the terminal startup sequence is complete.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.1.20 |
aprisaXETerminalMuxStatusThis indicates if the terminal is operating in Mux mode.roobsolete Enumeration .1.3.6.1.4.1.14817.7.3.1.2.1.21 |
aprisaXETerminalBootloaderDataVersionThis indicates the data version of the shared data field in the bootloader.ro Unsigned32 .1.3.6.1.4.1.14817.7.3.1.2.1.22 |
aprisaXETerminalUploadFailAlarmClearUsed to clear a current Upload Failure Alarm.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.1.23 |
aprisaXETerminalEquipmentTypeThis indicates what type of equipment the terminal is.ro Enumeration .1.3.6.1.4.1.14817.7.3.1.2.1.24 |
aprisaXEPerformance OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.6 |
aprisaXECorrectableErrorCountThe terminal correctable error count.ro FourRFErrorCounter (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.6.1 |
aprisaXEUncorrectableErrorCountThe terminal uncorrectable error count.ro FourRFErrorCounter (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.6.2 |
aprisaXEModemSNRThe modem signal to noise ratio.ro FourRFSNR (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.6.3 |
aprisaXETxPacketCountThe terminal transmitted ethernet packet count (to link).ro Counter32 .1.3.6.1.4.1.14817.7.3.1.2.6.4 |
aprisaXERxPacketCountThe terminal received ethernet packet count (from link).ro Counter32 .1.3.6.1.4.1.14817.7.3.1.2.6.5 |
aprisaXERxPacketErrorCountThe terminal received ethernet packet error count (from link).ro Counter32 .1.3.6.1.4.1.14817.7.3.1.2.6.6 |
aprisaXEErrorCounterCommandForces reset, freeze or unfreeze the error counters.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.6.7 |
aprisaXEErrorFreeSecondsThe number of Error Free Seconds for the terminal.ro Counter32 .1.3.6.1.4.1.14817.7.3.1.2.6.8 |
aprisaXEErroredSecondsThe number of Errored Seconds for the terminal.ro Counter32 .1.3.6.1.4.1.14817.7.3.1.2.6.9 |
aprisaXEBERExponentThe exponent of the Bit Error Rate for the terminal.ro DisplayString ( SIZE .1.3.6.1.4.1.14817.7.3.1.2.6.10 |
aprisaXEPscSysUncorrectableErrorCountThe terminal uncorrectable error count.ro DisplayString ( SIZE .1.3.6.1.4.1.14817.7.3.1.2.6.11 |
aprisaXEPscSysErrorFreeSecondsThe number of Error Free Seconds for the terminal.ro Counter32 .1.3.6.1.4.1.14817.7.3.1.2.6.12 |
aprisaXEPscSysErroredSecondsThe number of Errored Seconds for the terminal.ro Counter32 .1.3.6.1.4.1.14817.7.3.1.2.6.13 |
aprisaXEPscSysBERExponentThe exponent of the Bit Error Rate for the terminal.ro DisplayString( SIZE .1.3.6.1.4.1.14817.7.3.1.2.6.14 |
aprisaXEPscRadioAUncorrectableErrorCountThe terminal uncorrectable error count.ro FourRFErrorCounter (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.6.15 |
aprisaXEPscRadioAErrorFreeSecondsThe number of Error Free Seconds for the terminal.ro Counter32 .1.3.6.1.4.1.14817.7.3.1.2.6.16 |
aprisaXEPscRadioAErroredSecondsThe number of Errored Seconds for the terminal.ro Counter32 .1.3.6.1.4.1.14817.7.3.1.2.6.17 |
aprisaXEPscRadioABERExponentThe exponent of the Bit Error Rate for the terminal.ro DisplayString( SIZE .1.3.6.1.4.1.14817.7.3.1.2.6.18 |
aprisaXEPscRadioBUncorrectableErrorCountThe terminal uncorrectable error count.ro FourRFErrorCounter (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.6.19 |
aprisaXEPscRadioBErrorFreeSecondsThe number of Error Free Seconds for the terminal.ro Counter32 .1.3.6.1.4.1.14817.7.3.1.2.6.20 |
aprisaXEPscRadioBErroredSecondsThe number of Errored Seconds for the terminal.ro Counter32 .1.3.6.1.4.1.14817.7.3.1.2.6.21 |
aprisaXEPscRadioBBERExponentThe exponent of the Bit Error Rate for the terminal.ro DisplayString( SIZE .1.3.6.1.4.1.14817.7.3.1.2.6.22 |
aprisaXEExternalAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.11 |
aprisaXEExternalAlarm1 OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.11.1 |
aprisaXEExternalAlarm1StatusThe status of the first external alarm input.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.11.1.1 |
aprisaXEExternalAlarm1SeverityThe severity of the first external alarm input.rw FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.11.1.2 |
aprisaXEExternalAlarm1EnabledIndicates whether the first external alarm input is enabled.
If not changes to the input will be ignored. By default the
alarm is enabled.rw FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.11.1.3 |
aprisaXEExternalAlarm1MappingThis defines how the first external alarm input is mapped to
the remote alarms.rw AprisaXEAlarmMapping (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.11.1.4 |
aprisaXEExternalAlarm1DescriptionA description (user defined) for the external alarm.rw DisplayString ( SIZE .1.3.6.1.4.1.14817.7.3.1.2.11.1.5 |
aprisaXEExternalAlarm2 OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.11.2 |
aprisaXEExternalAlarm2StatusThe status of the second external alarm input.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.11.2.1 |
aprisaXEExternalAlarm2SeverityThe severity of the second external alarm input.rw FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.11.2.2 |
aprisaXEExternalAlarm2EnabledIndicates whether the second external alarm input is enabled.
If not changes to the input will be ignored. By default the
alarm is enabled.rw FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.11.2.3 |
aprisaXEExternalAlarm2MappingThis defines how the second external alarm input is mapped to
the remote alarms.rw AprisaXEAlarmMapping (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.11.2.4 |
aprisaXEExternalAlarm2DescriptionA description (user defined) for the external alarm.rw DisplayString ( SIZE .1.3.6.1.4.1.14817.7.3.1.2.11.2.5 |
aprisaXEExternalAlarmPolarityIndicates the polarity used to indicate the presence of an
alarm at an external alarm input.rw AprisaXEAlarmPolarity (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.11.3 |
aprisaXEExternalAlarmOutputPolarityIndicates the polarity used to indicate the presence of an
alarm at an external alarm output, this may be different from
the input polarity.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.11.4 |
aprisaXEExternalAlarmOutputOne OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.11.5 |
aprisaXEExternalAlarmOutputOneStatusThe status of the first external alarm output.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.11.5.1 |
aprisaXEExternalAlarmOutputOneMappingThis defines how the first external alarm output is mapped to
the alarms.rw AprisaXEAlarmMapping (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.11.5.2 |
aprisaXEExternalAlarmOutputTwo OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.11.6 |
aprisaXEExternalAlarmOutputTwoStatusThe status of the second external alarm output.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.11.6.1 |
aprisaXEExternalAlarmOutputTwoMappingThis defines how the second external alarm output is mapped to
the alarms.rw AprisaXEAlarmMapping (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.11.6.2 |
aprisaXEExternalAlarmOutputThree OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.11.7 |
aprisaXEExternalAlarmOutputThreeStatusThe status of the third external alarm output.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.11.7.1 |
aprisaXEExternalAlarmOutputThreeMappingThis defines how the third external alarm output is mapped to
the alarms.rw AprisaXEAlarmMapping (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.11.7.2 |
aprisaXEExternalAlarmOutputFour OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.11.8 |
aprisaXEExternalAlarmOutputFourStatusThe status of the fourth external alarm output.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.11.8.1 |
aprisaXEExternalAlarmOutputFourMappingThis defines how the fourth external alarm output is mapped to
the alarms.rw AprisaXEAlarmMapping (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.11.8.2 |
aprisaXERemoteAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.16 |
aprisaXEMajorRemoteAlarmStatusThe status of the remote major alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.16.1 |
aprisaXEMajorRemoteAlarmOutputThis defines how the remote major alarm is mapped to the
external alarm outputs.rwobsolete AprisaXEAlarmOutput (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.16.2 |
aprisaXEMinorRemoteAlarmStatusThe status of the remote minor alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.16.10 |
aprisaXEMinorRemoteAlarmOutputThis defines how the remote minor alarm is mapped to the
external alarm outputs.rwobsolete AprisaXEAlarmOutput (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.16.11 |
aprisaXEMHSB OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.19 |
aprisaXEMHSBStatusThe state of an MHSB configured terminal.ro FourRFMHSBStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.19.1 |
aprisaXEMHSBEnableSet the terminal into Monitored Hot Standby Mode.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.19.2 |
aprisaXEMHSBCommandCommands to apply while in MHSB mode.rw FourRFMHSBCommand (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.19.3 |
aprisaXEMHSBTerminalSelectConfigure terminal as terminal A or terminal B of an MHSB pair.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.19.4 |
aprisaXEMHSBSwitchoverStatusStatus of the alarm reflecting if a switchover has occurred.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.19.5 |
aprisaXEFans OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.21 |
aprisaXEFan1StatusThe status of the fan one.ro FourRFFanStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.21.1 |
aprisaXEFan2StatusThe status of the fan two.ro FourRFFanStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.21.2 |
aprisaXEFanEnableTurn the fans on or off.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.21.3 |
aprisaXEAlarmTableThis table stores the currently active alarms. Up to 500
separate alarms will be stored in the table. SEQUENCE OF AprisaXEAlarmEntry .1.3.6.1.4.1.14817.7.3.1.2.26 |
aprisaXEAlarmEntryThe table entry index specification, just the alarm index. AprisaXEAlarmEntry .1.3.6.1.4.1.14817.7.3.1.2.26.1 |
aprisaXEAlarmIndexThe index into the alarm table.ro INTEGER ( 0..500 ) .1.3.6.1.4.1.14817.7.3.1.2.26.1.1 |
aprisaXEAlarmSlotThe number of the slot generating the alarm.ro AprisaXESlotNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.26.1.2 |
aprisaXEAlarmSourceThe source of the alarm, a card type or external.ro AprisaXEAlarmSource (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.26.1.3 |
aprisaXEAlarmPortThe source port of the alarm.ro AprisaXEPortNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.26.1.4 |
aprisaXEAlarmSeverityThe severity of the alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.26.1.5 |
aprisaXEAlarmTypeThe type of the alarm.ro AprisaXEAlarmType (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.26.1.6 |
aprisaXEAlarmTimeThe time that the alarm occurred.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.26.1.7 |
aprisaXEAlarmHistoryTableThis table stores a history of the alarms as they become
active and cleared. SEQUENCE OF AprisaXEAlarmHistoryEntry .1.3.6.1.4.1.14817.7.3.1.2.31 |
aprisaXEAlarmHistoryEntryThe table entry index specification, just the alarm index. AprisaXEAlarmHistoryEntry .1.3.6.1.4.1.14817.7.3.1.2.31.1 |
aprisaXEAlarmHistoryIndexThe index into the alarm history table.ro INTEGER ( 0..100 ) .1.3.6.1.4.1.14817.7.3.1.2.31.1.1 |
aprisaXEAlarmHistorySlotThe number of the slot generating the alarm.ro AprisaXESlotNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.31.1.2 |
aprisaXEAlarmHistorySourceThe source of the alarm, a card type or external.ro AprisaXEAlarmSource (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.31.1.3 |
aprisaXEAlarmHistoryPortThe source port of the alarm.ro AprisaXEPortNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.31.1.4 |
aprisaXEAlarmHistorySeverityThe severity of the alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.31.1.5 |
aprisaXEAlarmHistoryTypeThe type of the alarm.ro AprisaXEAlarmType (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.31.1.6 |
aprisaXEAlarmHistoryPresentIndicates whether the alarm is present or not.ro FourRFAlarmPresent (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.31.1.7 |
aprisaXEAlarmHistoryTimeThe time that the alarm state change occurred.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.31.1.8 |
aprisaXEAlarmControl OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.32 |
aprisaXEAlarmHistoryCommandAllows the alarm history table to be cleared.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.32.1 |
aprisaXETransmitter OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.36 |
aprisaXETransmitterStatusIndicates whether the transmitter is currently on or off.ro Enumeration .1.3.6.1.4.1.14817.7.3.1.2.36.1 |
aprisaXETransmitterCommandCommands used to control the transmitter, currently the transmitter can
be switched on and off. No other commands are defined.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.36.2 |
aprisaXETransmitterSynthesiserStatusThe status of the transmitter synthesiser.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.3 |
aprisaXETransmitter5VPowerStatusThe status of the transmitter 5V power supply.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.4 |
aprisaXETransmitter11VPowerStatusThe status of the transmitter 11V power supply.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.5 |
aprisaXETransmitter28VPowerStatusThe status of the transmitter 28V power supply.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.6 |
aprisaXETransmitterFrequencyThe terminal transmit frequency in MHz. The possible bands are:
330 to 400 MHz (300 MHz)
400 to 470 MHz (400 MHz)
1350 to 1550 MHz (1400 MHz)
The frequency value should be supplied in Hz.rw FourRFFrequency (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.7 |
aprisaXETransmitterPowerThe TX power value, the value should be entered in dB.rw FourRFTxPower (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.8 |
aprisaXETransmitterAGCThe Automatic Gain Control value in millivolts.roobsolete AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.9 |
aprisaXETransmitterForwardPowerThe forward power measurement value in millivolts.roobsolete AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.10 |
aprisaXETransmitterReversePowerThe reverse power value in millivolts.roobsolete AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.11 |
aprisaXETransmitterTemperatureThe temperature value in degrees Celcius.roobsolete FourRFTemperature (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.12 |
aprisaXETransmitterVTuneThe voltage output from TX synth.roobsolete AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.13 |
aprisaXETransmitter28VSupplyThe 28V supply rail value in millivolts.roobsolete AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.14 |
aprisaXETransmitter11VSupplyThe 11V supply rail value in millivolts.roobsolete AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.15 |
aprisaXETransmitter5VDigitalSupplyThe 5V digital supply rail value in millivolts.roobsolete AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.16 |
aprisaXETransmitter7VSupplyThe 7V RF supply rail value in millivolts.roobsolete AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.17 |
aprisaXETransmitter9VSupplyThe 9V supply synthesiser rail value in millivolts.roobsolete AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.18 |
aprisaXETransmitterCharacterisationDataStatusThe status of the transmitter characterisation data.ro AprisaXEDataStatus (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.19 |
aprisaXETransmitterSerialNumberThe unique module serial number for the transmitter.ro FourRFSerialNumber (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.20 |
aprisaXETransmitterReturnLossThe return loss for the transmitter.ro AprisaXEDbValue (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.21 |
aprisaXETransmitterMibDataStatusThe status of the transmitter MIB data.ro AprisaXEDataStatus (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.22 |
aprisaXETransmitterADCChZeroThe TX adc ch zero voltage.ro AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.23 |
aprisaXETransmitterADCChOneThe TX adc ch one voltage.ro AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.24 |
aprisaXETransmitterADCChTwoThe TX adc ch two voltage.ro AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.25 |
aprisaXETransmitterADCChThreeThe TX adc ch three voltage.ro AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.26 |
aprisaXETransmitterADCChFourThe TX adc ch four voltage.ro AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.27 |
aprisaXETransmitterADCChFiveThe TX adc ch five voltage.ro AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.28 |
aprisaXETransmitterADCChSixThe TX adc ch six voltage.ro AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.29 |
aprisaXETransmitterADCChSevenThe TX adc ch seven voltage.ro AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.30 |
aprisaXETransmitterADCChEightThe TX adc ch eight voltage.ro AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.31 |
aprisaXETransmitterADCChNineThe TX adc ch nine voltage.ro AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.32 |
aprisaXETransmitterADCChTenThe TX adc ch ten voltage.ro AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.33 |
aprisaXETransmitterADCChElevenThe TX adc ch eleven voltage.ro AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.34 |
aprisaXETransmitterNeg5VPowerStatusThe status of the transmitter Negative 5V power supply.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.35 |
aprisaXETransmitterAmplifierBalanceStatusThe status of the transmitter Balanced Power Amplifier.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.36.36 |
aprisaXETransmitterTcxoAdjustmentThe TX TCXO adjustment to be made by the customer, to
tune the TCXO. This is a shift in DAC steps.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.36.37 |
aprisaXETransmitterSynthFileVersionThe version of the Synth File loaded from the filesystem.ro INTEGER ( 0..999 ) .1.3.6.1.4.1.14817.7.3.1.2.36.38 |
aprisaXETransmitterOperationalDataVersionThe version of the operational data for the transmitter.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.36.39 |
aprisaXETransmitterSwCompatibilityThe transmitter software compatibility number.ro INTEGER ( 0..999 ) .1.3.6.1.4.1.14817.7.3.1.2.36.40 |
aprisaXEReceiver OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.51 |
aprisaXEReceiverStatusStatus of the receiver, currently the receiver can be On/Off
and the loopback can be On/Off.ro Enumeration .1.3.6.1.4.1.14817.7.3.1.2.51.1 |
aprisaXEReceiverCommandCommands used to control the receiver, currently the receiver can
be switched on and off and the loopback option switched on and off.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.51.2 |
aprisaXEReceiverSynthesiserStatusThe status of the receiver synthesiser.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.51.3 |
aprisaXEReceiver12VPowerStatusThe status of the Receiver 12V power supply.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.51.4 |
aprisaXEReceiverFrequencyThe terminal transmit frequency in MHz. The possible bands are:
330 to 400 MHz (300 MHz)
400 to 470 MHz (400 MHz)
1350 to 1550 MHz (1400 MHz)
The frequency value should be supplied in Hz.rw FourRFFrequency (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.51.5 |
aprisaXEReceiverRSSIThe characterised RSSI Voltage.ro FourRFRSSI (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.51.6 |
aprisaXEReceiverTemperatureThe temperature value, this should only be accessible in
engineering mode.ro FourRFTemperature (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.51.8 |
aprisaXEReceiverVTuneThe voltage output from RX synth value, this should only be
accessible in engineering mode.roobsolete AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.51.9 |
aprisaXEReceiver9VSupplyThe 9V supply rail value, this should only be accessible in
engineering mode.roobsolete AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.51.10 |
aprisaXEReceiver5VSupplyThe 5V supply rail value, this should only be accessible in
engineering mode.roobsolete AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.51.11 |
aprisaXEReceiverModemAGCThe modem AGC, this should only be accessible in
engineering mode.roobsolete AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.51.12 |
aprisaXEReceiverNeg1V5SupplyThe -1.5V supply rail value, this should only be accessible in
engineering mode.roobsolete AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.51.13 |
aprisaXEReceiver3V3SupplyThe 3.3V supply rail value, this should only be accessible in
engineering mode.roobsolete AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.51.14 |
aprisaXEReceiverDacTestThe DacTest value, this should only be accessible in
engineering mode.roobsolete AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.51.15 |
aprisaXEReceiverCharacterisationDataStatusThe status of the receiver characterisation data.ro AprisaXEDataStatus (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.51.16 |
aprisaXEReceiverSerialNumberThe unique module serial number for the receiver.ro FourRFSerialNumber (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.51.17 |
aprisaXEReceiverRfLoopbackEnables and disabled RF loopback.rw FourRFLoopback (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.51.18 |
aprisaXEReceiverRfLoopbackTimeoutThe number of seconds after which RF loopback should timeout.rw Unsigned32 .1.3.6.1.4.1.14817.7.3.1.2.51.19 |
aprisaXEReceiverMibDataStatusThe status of the receiver MIB data.ro AprisaXEDataStatus (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.51.20 |
aprisaXEReceiverADCChZeroThe RX adc ch zero voltage.ro AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.51.21 |
aprisaXEReceiverADCChOneThe RX adc ch one voltage.ro AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.51.22 |
aprisaXEReceiverADCChTwoThe RX adc ch two voltage.ro AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.51.23 |
aprisaXEReceiverADCChThreeThe RX adc ch three voltage.ro AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.51.24 |
aprisaXEReceiverADCChFourThe RX adc ch four voltage.ro AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.51.25 |
aprisaXEReceiverADCChFiveThe RX adc ch five voltage.ro AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.51.26 |
aprisaXEReceiverADCChSixThe RX adc ch six voltage.ro AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.51.27 |
aprisaXEReceiverADCChSevenThe RX adc ch seven voltage.ro AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.51.28 |
aprisaXEReceiverADCChEightThe RX adc ch eight voltage.ro AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.51.29 |
aprisaXEReceiverADCChNineThe RX adc ch nine voltage.ro AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.51.30 |
aprisaXEReceiverADCChTenThe RX adc ch ten voltage.ro AprisaXEAdcVoltage (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.51.31 |
aprisaXEReceiverRSSIThresQPSKLowerOnThe QPSK Lower ON RSSI Threshold.rw Integer32(-110..-40) .1.3.6.1.4.1.14817.7.3.1.2.51.32 |
aprisaXEReceiverRSSIThres16QAMLowerOnThe 16QAM Lower ON RSSI Threshold.rw Integer32(-110..-40) .1.3.6.1.4.1.14817.7.3.1.2.51.33 |
aprisaXEReceiverRSSIThres32QAMLowerOnThe 32QAM Lower ON RSSI Threshold.rw Integer32(-110..-40) .1.3.6.1.4.1.14817.7.3.1.2.51.34 |
aprisaXEReceiverRSSIThres64QAMLowerOnThe 64QAM Lower ON RSSI Threshold.rw Integer32(-110..-40) .1.3.6.1.4.1.14817.7.3.1.2.51.35 |
aprisaXEReceiverSynthFileVersionThe version of the Synth File loaded from the filesystem.ro INTEGER ( 0..999 ) .1.3.6.1.4.1.14817.7.3.1.2.51.36 |
aprisaXEReceiverOperationalDataVersionThe version of the operational data of the receiver.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.51.37 |
aprisaXEReceiverSwCompatibilityThe receiver software compatibility number.ro INTEGER ( 0..999 ) .1.3.6.1.4.1.14817.7.3.1.2.51.38 |
aprisaXEModem OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.61 |
aprisaXEModemDemodAligmentStatusStatus of the demodulator alignment.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.61.1 |
aprisaXEModemTdmAligmentStatusStatus of the TDM alignment.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.61.2 |
aprisaXEModemRefAStatusStatus of the REFa clock.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.61.3 |
aprisaXEModemRefBStatusStatus of the REFb clock.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.61.4 |
aprisaXEModemUncorrectableBlockCountCount of uncorrectable blocks since last read.ro FourRFErrorCounter (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.61.5 |
aprisaXEModemIQDataA list of I/Q data pairs, this is a sequence of byes values
the first byte is an I value, the second a Q value.ro AprisaXEIQData (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.61.6 |
aprisaXEModemSyncStatusStatus of the link lock.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.61.7 |
aprisaXEModemFreqOffsetEnableTurn the Modulator frequency offset of 50kHz on or off.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.61.8 |
aprisaXEModemInterleaverEnableInterleaver being used on the modem. Trade off
between link latency and FEC performance.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.61.9 |
aprisaXEModemQPSKCodingEncoding and Decoding being used for QPSK. Can be either
Gray coded or non Gray coded.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.61.10 |
aprisaXEModemConfigVersionModem Configuration file version.ro INTEGER ( 0..999 ) .1.3.6.1.4.1.14817.7.3.1.2.61.11 |
aprisaXEBoardTableThis table stores the basic information for the plugin slots. SEQUENCE OF AprisaXEBoardEntry .1.3.6.1.4.1.14817.7.3.1.2.66 |
aprisaXEBoardEntrySlot Information. AprisaXEBoardEntry .1.3.6.1.4.1.14817.7.3.1.2.66.1 |
aprisaXEBoardSlotThe slot number in which the board resides, the physical slots are
numbered from zero to ten and mapped to one to eleven in the MIB.
The motherboard is therefore in physical slot 0 but MIB slot 1.ro AprisaXESlotNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.66.1.1 |
aprisaXEBoardTypeThe type of the board in the slot. The types are as follows:
- none : there is no card in the slot
- modem : this card will be fitted in physical slot 0
- transmitter : the transmitter card, this will be in physical slot 9
- receiver : the receiver card, this will be in physical slot 10
- quadJET : e1/t1 4 port cardro AprisaXECardType (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.66.1.2 |
aprisaXEExpectedBoardTypeThe type of the board expected in the slot. The types are as follows:
- none : there is no card in the slot
- modem : this card will be fitted in physical slot 0
- transmitter : the transmitter card, this will be in physical slot 9
- receiver : the receiver card, this will be in physical slot 10
- quadJET : e1/t1 4 port cardrw AprisaXECardType (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.66.1.3 |
aprisaXEBoardHardwareVersionField indicating the hardware version for the board in the slot.ro AprisaXEHardwareVersion (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.66.1.4 |
aprisaXEBoardFirmwareVersionField indicating the firmware version for the board in the slot.ro AprisaXEHardwareVersion (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.66.1.5 |
aprisaXEBoardHSCNumberField indicating the hardware software configuration number
for the board in the slot.ro AprisaXEHardwareVersion (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.66.1.6 |
aprisaXEBoardSerialNumberField indicating the module serial number for the card in the slot.ro FourRFSerialNumber (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.66.1.7 |
aprisaXELinkAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86 |
aprisaXETransmitterAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1 |
aprisaXEForwardPowerHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.1 |
aprisaXEForwardPowerHiAlarmStatusThe status of the forward power too high alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.1.1 |
aprisaXEForwardPowerHiAlarmSeverityThe severity of the forward power too high alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.1.2 |
aprisaXEForwardPowerHiAlarmEnabledIndicates whether the forward power too high alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.1.3 |
aprisaXEForwardPowerHiAlarmThresholdIndicates the level at which the forward power too high
alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.1.4 |
aprisaXEForwardPowerHiAlarmClearThresholdIndicates the level at which the forward power alarm
will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.1.5 |
aprisaXEForwardPowerLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.2 |
aprisaXEForwardPowerLoAlarmStatusThe status of the forward power too low alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.2.1 |
aprisaXEForwardPowerLoAlarmSeverityThe severity of the forward power too low alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.2.2 |
aprisaXEForwardPowerLoAlarmEnabledIndicates whether the forward power too low alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.2.3 |
aprisaXEForwardPowerLoAlarmThresholdIndicates the level at which the forward power too low alarm
will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.2.4 |
aprisaXEForwardPowerLoAlarmClearThresholdIndicates the level at which the forward power too low alarm
will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.2.5 |
aprisaXEReversePowerHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.3 |
aprisaXEReversePowerHiAlarmStatusThe status of the reverse power out of limits alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.3.1 |
aprisaXEReversePowerHiAlarmSeverityThe severity of the reverse power out of limits alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.3.2 |
aprisaXEReversePowerHiAlarmEnabledIndicates whether the reverse power out of limits alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.3.3 |
aprisaXEReversePowerHiAlarmThresholdIndicates the level at which the reverse power alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.3.4 |
aprisaXEReversePowerHiAlarmClearThresholdIndicates the level at which the reverse power alarm will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.3.5 |
aprisaXEReversePowerLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.4 |
aprisaXEReversePowerLoAlarmStatusThe status of the reverse power out of limits alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.4.1 |
aprisaXEReversePowerLoAlarmSeverityThe severity of the reverse power out of limits alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.4.2 |
aprisaXEReversePowerLoAlarmEnabledIndicates whether the reverse power out of limits alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.4.3 |
aprisaXEReversePowerLoAlarmThresholdIndicates the level at which the reverse power alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.4.4 |
aprisaXEReversePowerLoAlarmClearThresholdIndicates the level at which the reverse power alarm will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.4.5 |
aprisaXETxPaTempAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.5 |
aprisaXETxPaTempAlarmStatusThe status of the transmitter temperature too high alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.5.1 |
aprisaXETxPaTempAlarmSeverityThe severity of the transmitter temperature too high alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.5.2 |
aprisaXETxPaTempAlarmEnabledIndicates whether the transmitter temperature too high alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.5.3 |
aprisaXETxPaTempAlarmThresholdIndicates the level at which the transmitter temperature too high
alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.5.4 |
aprisaXETxPaTempAlarmClearThresholdIndicates the level at which the transmitter temperature too high
will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.5.5 |
aprisaXETxPaTempWarnAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.6 |
aprisaXETxPaTempWarnAlarmStatusThe status of the transmitter temperature warning alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.6.1 |
aprisaXETxPaTempWarnAlarmSeverityThe severity of the transmitter temperature warning alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.6.2 |
aprisaXETxPaTempWarnAlarmEnabledIndicates whether the transmitter temperature warning alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.6.3 |
aprisaXETxPaTempWarnAlarmThresholdIndicates the level at which the transmitter temperature warning
alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.6.4 |
aprisaXETxPaTempWarnAlarmClearThresholdIndicates the level at which the transmitter temperature warning
will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.6.5 |
aprisaXETxAgcHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.7 |
aprisaXETxAgcHiAlarmStatusThe status of the transmitter AGC too high alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.7.1 |
aprisaXETxAgcHiAlarmSeverityThe severity of the transmitter AGC too high alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.7.2 |
aprisaXETxAgcHiAlarmEnabledIndicates whether the transmitter AGC too high alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.7.3 |
aprisaXETxAgcHiAlarmThresholdIndicates the level at which the transmitter AGC too high
alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.7.4 |
aprisaXETxAgcHiAlarmClearThresholdIndicates the level at which the transmitter AGC too high
will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.7.5 |
aprisaXETxAgcLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.8 |
aprisaXETxAgcLoAlarmStatusThe status of the transmitter AGC too low alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.8.1 |
aprisaXETxAgcLoAlarmSeverityThe severity of the transmitter AGC too low alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.8.2 |
aprisaXETxAgcLoAlarmEnabledIndicates whether the transmitter AGC too low alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.8.3 |
aprisaXETxAgcLoAlarmThresholdIndicates the level at which the transmitter AGC too low
alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.8.4 |
aprisaXETxAgcLoAlarmClearThresholdIndicates the level at which the transmitter AGC too low
will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.8.5 |
aprisaXETxVtuneHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.9 |
aprisaXETxVtuneHiAlarmStatusThe status of the transmitter VTUNE too high alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.9.1 |
aprisaXETxVtuneHiAlarmSeverityThe severity of the transmitter VTUNE too high alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.9.2 |
aprisaXETxVtuneHiAlarmEnabledIndicates whether the transmitter VTUNE too high alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.9.3 |
aprisaXETxVtuneHiAlarmThresholdIndicates the level at which the transmitter VTUNE too high
alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.9.4 |
aprisaXETxVtuneHiAlarmClearThresholdIndicates the level at which the transmitter VTUNE too high
will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.9.5 |
aprisaXETxVtuneLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.10 |
aprisaXETxVtuneLoAlarmStatusThe status of the transmitter VTUNE too low alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.10.1 |
aprisaXETxVtuneLoAlarmSeverityThe severity of the transmitter VTUNE too low alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.10.2 |
aprisaXETxVtuneLoAlarmEnabledIndicates whether the transmitter VTUNE too low alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.10.3 |
aprisaXETxVtuneLoAlarmThresholdIndicates the level at which the transmitter VTUNE too low
alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.10.4 |
aprisaXETxVtuneLoAlarmClearThresholdIndicates the level at which the transmitter VTUNE too low
will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.10.5 |
aprisaXETx5VDigHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.11 |
aprisaXETx5VDigHiAlarmStatusThe status of the transmitter 5V digital voltage too high alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.11.1 |
aprisaXETx5VDigHiAlarmSeverityThe severity of the transmitter 5V digital voltage too high alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.11.2 |
aprisaXETx5VDigHiAlarmEnabledIndicates whether the transmitter 5V digital voltage too high alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.11.3 |
aprisaXETx5VDigHiAlarmThresholdIndicates the level at which the transmitter 5V digital voltage too high
alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.11.4 |
aprisaXETx5VDigHiAlarmClearThresholdIndicates the level at which the transmitter 5V digital voltage too high
will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.11.5 |
aprisaXETx5VDigLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.12 |
aprisaXETx5VDigLoAlarmStatusThe status of the transmitter 5V digital voltage too low alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.12.1 |
aprisaXETx5VDigLoAlarmSeverityThe severity of the transmitter 5V digital voltage too low alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.12.2 |
aprisaXETx5VDigLoAlarmEnabledIndicates whether the transmitter 5V digital voltage too low alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.12.3 |
aprisaXETx5VDigLoAlarmThresholdIndicates the level at which the transmitter 5V digital voltage too low
alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.12.4 |
aprisaXETx5VDigLoAlarmClearThresholdIndicates the level at which the transmitter 5V digital voltage too low
will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.12.5 |
aprisaXETx7VRfHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.13 |
aprisaXETx7VRfHiAlarmStatusThe status of the transmitter 7V RF voltage too high alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.13.1 |
aprisaXETx7VRfHiAlarmSeverityThe severity of the transmitter 7V RF voltage too high alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.13.2 |
aprisaXETx7VRfHiAlarmEnabledIndicates whether the transmitter 7V RF voltage too high alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.13.3 |
aprisaXETx7VRfHiAlarmThresholdIndicates the level at which the transmitter 7V RF voltage too high
alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.13.4 |
aprisaXETx7VRfHiAlarmClearThresholdIndicates the level at which the transmitter 7V RF voltage too high
will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.13.5 |
aprisaXETx7VRfLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.14 |
aprisaXETx7VRfLoAlarmStatusThe status of the transmitter 7V RF voltage too low alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.14.1 |
aprisaXETx7VRfLoAlarmSeverityThe severity of the transmitter 7V RF voltage too low alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.14.2 |
aprisaXETx7VRfLoAlarmEnabledIndicates whether the transmitter 7V RF voltage too low alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.14.3 |
aprisaXETx7VRfLoAlarmThresholdIndicates the level at which the transmitter 7V RF voltage too low
alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.14.4 |
aprisaXETx7VRfLoAlarmClearThresholdIndicates the level at which the transmitter 7V RF voltage too low
will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.14.5 |
aprisaXETx9VHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.15 |
aprisaXETx9VHiAlarmStatusThe status of the transmitter 9V voltage too high alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.15.1 |
aprisaXETx9VHiAlarmSeverityThe severity of the transmitter 9V voltage too high alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.15.2 |
aprisaXETx9VHiAlarmEnabledIndicates whether the transmitter 9V voltage too high alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.15.3 |
aprisaXETx9VHiAlarmThresholdIndicates the level at which the transmitter 9V voltage too high
alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.15.4 |
aprisaXETx9VHiAlarmClearThresholdIndicates the level at which the transmitter 9V voltage too high
will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.15.5 |
aprisaXETx9VLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.16 |
aprisaXETx9VLoAlarmStatusThe status of the transmitter 9V voltage too low alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.16.1 |
aprisaXETx9VLoAlarmSeverityThe severity of the transmitter 9V voltage too low alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.16.2 |
aprisaXETx9VLoAlarmEnabledIndicates whether the transmitter 9V voltage too low alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.16.3 |
aprisaXETx9VLoAlarmThresholdIndicates the level at which the transmitter 9V voltage too low
alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.16.4 |
aprisaXETx9VLoAlarmClearThresholdIndicates the level at which the transmitter 9V voltage too low
will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.16.5 |
aprisaXETx11VHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.17 |
aprisaXETx11VHiAlarmStatusThe status of the transmitter 11V voltage too high alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.17.1 |
aprisaXETx11VHiAlarmSeverityThe severity of the transmitter 11V voltage too high alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.17.2 |
aprisaXETx11VHiAlarmEnabledIndicates whether the transmitter 11V voltage too high alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.17.3 |
aprisaXETx11VHiAlarmThresholdIndicates the level at which the transmitter 11V voltage too high
alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.17.4 |
aprisaXETx11VHiAlarmClearThresholdIndicates the level at which the transmitter 11V voltage too high
will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.17.5 |
aprisaXETx11VLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.18 |
aprisaXETx11VLoAlarmStatusThe status of the transmitter 11V voltage too low alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.18.1 |
aprisaXETx11VLoAlarmSeverityThe severity of the transmitter 11V voltage too low alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.18.2 |
aprisaXETx11VLoAlarmEnabledIndicates whether the transmitter 11V voltage too low alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.18.3 |
aprisaXETx11VLoAlarmThresholdIndicates the level at which the transmitter 11V voltage too low
alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.18.4 |
aprisaXETx11VLoAlarmClearThresholdIndicates the level at which the transmitter 11V voltage too low
will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.18.5 |
aprisaXETx28VHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.19 |
aprisaXETx28VHiAlarmStatusThe status of the transmitter 28V voltage too high alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.19.1 |
aprisaXETx28VHiAlarmSeverityThe severity of the transmitter 28V voltage too high alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.19.2 |
aprisaXETx28VHiAlarmEnabledIndicates whether the transmitter 28V voltage too high alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.19.3 |
aprisaXETx28VHiAlarmThresholdIndicates the level at which the transmitter 28V voltage too high
alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.19.4 |
aprisaXETx28VHiAlarmClearThresholdIndicates the level at which the transmitter 28V voltage too high
will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.19.5 |
aprisaXETx28VLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.20 |
aprisaXETx28VLoAlarmStatusThe status of the transmitter 28V voltage too low alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.20.1 |
aprisaXETx28VLoAlarmSeverityThe severity of the transmitter 28V voltage too low alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.20.2 |
aprisaXETx28VLoAlarmEnabledIndicates whether the transmitter 28V voltage too low alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.20.3 |
aprisaXETx28VLoAlarmThresholdIndicates the level at which the transmitter 28V voltage too low
alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.20.4 |
aprisaXETx28VLoAlarmClearThresholdIndicates the level at which the transmitter 28V voltage too low
will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.20.5 |
aprisaXETxSynthOutOfLockAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.21 |
aprisaXETxSynthOutOfLockAlarmStatusThe status of the TX synth out of lock alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.21.1 |
aprisaXETxSynthOutOfLockAlarmSeverityThe severity of the TX synth out of lock alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.21.2 |
aprisaXETxSynthOutOfLockAlarmEnabledIndicates whether the TX synth out of lock alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.21.3 |
aprisaXEReturnLossHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.22 |
aprisaXEReturnLossHiAlarmStatusThe status of the return loss out of limits alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.22.1 |
aprisaXEReturnLossHiAlarmSeverityThe severity of the return loss out of limits alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.22.2 |
aprisaXEReturnLossHiAlarmEnabledIndicates whether the return loss out of limits alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.22.3 |
aprisaXEReturnLossHiAlarmThresholdIndicates the level at which the return loss alarm will be set.rw Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.22.4 |
aprisaXEReturnLossHiAlarmClearThresholdIndicates the level at which the return loss alarm will be cleared.rw Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.22.5 |
aprisaXETxADCChZeroHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.23 |
aprisaXETxADCChZeroHiAlarmNameThe name of the transmitter ADC Ch Zero voltage too high alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.1.23.1 |
aprisaXETxADCChZeroHiAlarmStatusThe status of the transmitter ADC Ch Zero voltage too high alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.23.2 |
aprisaXETxADCChZeroHiAlarmSeverityThe severity of the transmitter ADC Ch Zero voltage too high alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.23.3 |
aprisaXETxADCChZeroHiAlarmEnabledIndicates whether the transmitter ADC Ch Zero voltage too high alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.23.4 |
aprisaXETxADCChZeroHiAlarmThresholdIndicates the level at which the transmitter ADC Ch Zero voltage too high
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.23.5 |
aprisaXETxADCChZeroHiAlarmClearThresholdIndicates the level at which the transmitter ADC Ch Zero voltage too high
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.23.6 |
aprisaXETxADCChZeroLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.24 |
aprisaXETxADCChZeroLoAlarmNameThe name of the transmitter ADC Ch Zero voltage too low alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.1.24.1 |
aprisaXETxADCChZeroLoAlarmStatusThe status of the transmitter ADC Ch Zero voltage too low alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.24.2 |
aprisaXETxADCChZeroLoAlarmSeverityThe severity of the transmitter ADC Ch Zero voltage too low alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.24.3 |
aprisaXETxADCChZeroLoAlarmEnabledIndicates whether the transmitter ADC Ch Zero voltage too low alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.24.4 |
aprisaXETxADCChZeroLoAlarmThresholdIndicates the level at wLoch the transmitter ADC Ch Zero voltage too low
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.24.5 |
aprisaXETxADCChZeroLoAlarmClearThresholdIndicates the level at wLoch the transmitter ADC Ch Zero voltage too low
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.24.6 |
aprisaXETxADCChOneHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.25 |
aprisaXETxADCChOneHiAlarmNameThe name of the transmitter ADC Ch One voltage too high alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.1.25.1 |
aprisaXETxADCChOneHiAlarmStatusThe status of the transmitter ADC Ch One voltage too high alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.25.2 |
aprisaXETxADCChOneHiAlarmSeverityThe severity of the transmitter ADC Ch One voltage too high alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.25.3 |
aprisaXETxADCChOneHiAlarmEnabledIndicates whether the transmitter ADC Ch One voltage too high alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.25.4 |
aprisaXETxADCChOneHiAlarmThresholdIndicates the level at which the transmitter ADC Ch One voltage too high
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.25.5 |
aprisaXETxADCChOneHiAlarmClearThresholdIndicates the level at which the transmitter ADC Ch One voltage too high
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.25.6 |
aprisaXETxADCChOneLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.26 |
aprisaXETxADCChOneLoAlarmNameThe name of the transmitter ADC Ch One voltage too low alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.1.26.1 |
aprisaXETxADCChOneLoAlarmStatusThe status of the transmitter ADC Ch One voltage too low alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.26.2 |
aprisaXETxADCChOneLoAlarmSeverityThe severity of the transmitter ADC Ch One voltage too low alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.26.3 |
aprisaXETxADCChOneLoAlarmEnabledIndicates whether the transmitter ADC Ch One voltage too low alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.26.4 |
aprisaXETxADCChOneLoAlarmThresholdIndicates the level at wLoch the transmitter ADC Ch One voltage too low
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.26.5 |
aprisaXETxADCChOneLoAlarmClearThresholdIndicates the level at wLoch the transmitter ADC Ch One voltage too low
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.26.6 |
aprisaXETxADCChTwoHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.27 |
aprisaXETxADCChTwoHiAlarmNameThe name of the transmitter ADC Ch Two voltage too high alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.1.27.1 |
aprisaXETxADCChTwoHiAlarmStatusThe status of the transmitter ADC Ch Two voltage too high alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.27.2 |
aprisaXETxADCChTwoHiAlarmSeverityThe severity of the transmitter ADC Ch Two voltage too high alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.27.3 |
aprisaXETxADCChTwoHiAlarmEnabledIndicates whether the transmitter ADC Ch Two voltage too high alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.27.4 |
aprisaXETxADCChTwoHiAlarmThresholdIndicates the level at which the transmitter ADC Ch Two voltage too high
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.27.5 |
aprisaXETxADCChTwoHiAlarmClearThresholdIndicates the level at which the transmitter ADC Ch Two voltage too high
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.27.6 |
aprisaXETxADCChTwoLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.28 |
aprisaXETxADCChTwoLoAlarmNameThe name of the transmitter ADC Ch Two voltage too low alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.1.28.1 |
aprisaXETxADCChTwoLoAlarmStatusThe status of the transmitter ADC Ch Two voltage too low alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.28.2 |
aprisaXETxADCChTwoLoAlarmSeverityThe severity of the transmitter ADC Ch Two voltage too low alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.28.3 |
aprisaXETxADCChTwoLoAlarmEnabledIndicates whether the transmitter ADC Ch Two voltage too low alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.28.4 |
aprisaXETxADCChTwoLoAlarmThresholdIndicates the level at wLoch the transmitter ADC Ch Two voltage too low
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.28.5 |
aprisaXETxADCChTwoLoAlarmClearThresholdIndicates the level at wLoch the transmitter ADC Ch Two voltage too low
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.28.6 |
aprisaXETxADCChThreeHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.29 |
aprisaXETxADCChThreeHiAlarmNameThe name of the transmitter ADC Ch Three voltage too high alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.1.29.1 |
aprisaXETxADCChThreeHiAlarmStatusThe status of the transmitter ADC Ch Three voltage too high alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.29.2 |
aprisaXETxADCChThreeHiAlarmSeverityThe severity of the transmitter ADC Ch Three voltage too high alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.29.3 |
aprisaXETxADCChThreeHiAlarmEnabledIndicates whether the transmitter ADC Ch Three voltage too high alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.29.4 |
aprisaXETxADCChThreeHiAlarmThresholdIndicates the level at which the transmitter ADC Ch Three voltage too high
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.29.5 |
aprisaXETxADCChThreeHiAlarmClearThresholdIndicates the level at which the transmitter ADC Ch Three voltage too high
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.29.6 |
aprisaXETxADCChThreeLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.30 |
aprisaXETxADCChThreeLoAlarmNameThe name of the transmitter ADC Ch Three voltage too low alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.1.30.1 |
aprisaXETxADCChThreeLoAlarmStatusThe status of the transmitter ADC Ch Three voltage too low alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.30.2 |
aprisaXETxADCChThreeLoAlarmSeverityThe severity of the transmitter ADC Ch Three voltage too low alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.30.3 |
aprisaXETxADCChThreeLoAlarmEnabledIndicates whether the transmitter ADC Ch Three voltage too low alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.30.4 |
aprisaXETxADCChThreeLoAlarmThresholdIndicates the level at wLoch the transmitter ADC Ch Three voltage too low
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.30.5 |
aprisaXETxADCChThreeLoAlarmClearThresholdIndicates the level at wLoch the transmitter ADC Ch Three voltage too low
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.30.6 |
aprisaXETxADCChFourHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.31 |
aprisaXETxADCChFourHiAlarmNameThe name of the transmitter ADC Ch Four voltage too high alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.1.31.1 |
aprisaXETxADCChFourHiAlarmStatusThe status of the transmitter ADC Ch Four voltage too high alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.31.2 |
aprisaXETxADCChFourHiAlarmSeverityThe severity of the transmitter ADC Ch Four voltage too high alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.31.3 |
aprisaXETxADCChFourHiAlarmEnabledIndicates whether the transmitter ADC Ch Four voltage too high alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.31.4 |
aprisaXETxADCChFourHiAlarmThresholdIndicates the level at which the transmitter ADC Ch Four voltage too high
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.31.5 |
aprisaXETxADCChFourHiAlarmClearThresholdIndicates the level at which the transmitter ADC Ch Four voltage too high
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.31.6 |
aprisaXETxADCChFourLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.32 |
aprisaXETxADCChFourLoAlarmNameThe name of the transmitter ADC Ch Four voltage too low alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.1.32.1 |
aprisaXETxADCChFourLoAlarmStatusThe status of the transmitter ADC Ch Four voltage too low alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.32.2 |
aprisaXETxADCChFourLoAlarmSeverityThe severity of the transmitter ADC Ch Four voltage too low alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.32.3 |
aprisaXETxADCChFourLoAlarmEnabledIndicates whether the transmitter ADC Ch Four voltage too low alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.32.4 |
aprisaXETxADCChFourLoAlarmThresholdIndicates the level at wLoch the transmitter ADC Ch Four voltage too low
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.32.5 |
aprisaXETxADCChFourLoAlarmClearThresholdIndicates the level at wLoch the transmitter ADC Ch Four voltage too low
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.32.6 |
aprisaXETxADCChFiveHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.33 |
aprisaXETxADCChFiveHiAlarmNameThe name of the transmitter ADC Ch Five voltage too high alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.1.33.1 |
aprisaXETxADCChFiveHiAlarmStatusThe status of the transmitter ADC Ch Five voltage too high alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.33.2 |
aprisaXETxADCChFiveHiAlarmSeverityThe severity of the transmitter ADC Ch Five voltage too high alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.33.3 |
aprisaXETxADCChFiveHiAlarmEnabledIndicates whether the transmitter ADC Ch Five voltage too high alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.33.4 |
aprisaXETxADCChFiveHiAlarmThresholdIndicates the level at which the transmitter ADC Ch Five voltage too high
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.33.5 |
aprisaXETxADCChFiveHiAlarmClearThresholdIndicates the level at which the transmitter ADC Ch Five voltage too high
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.33.6 |
aprisaXETxADCChFiveLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.34 |
aprisaXETxADCChFiveLoAlarmNameThe name of the transmitter ADC Ch Five voltage too low alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.1.34.1 |
aprisaXETxADCChFiveLoAlarmStatusThe status of the transmitter ADC Ch Five voltage too low alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.34.2 |
aprisaXETxADCChFiveLoAlarmSeverityThe severity of the transmitter ADC Ch Five voltage too low alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.34.3 |
aprisaXETxADCChFiveLoAlarmEnabledIndicates whether the transmitter ADC Ch Five voltage too low alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.34.4 |
aprisaXETxADCChFiveLoAlarmThresholdIndicates the level at wLoch the transmitter ADC Ch Five voltage too low
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.34.5 |
aprisaXETxADCChFiveLoAlarmClearThresholdIndicates the level at wLoch the transmitter ADC Ch Five voltage too low
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.34.6 |
aprisaXETxADCChSixHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.35 |
aprisaXETxADCChSixHiAlarmNameThe name of the transmitter ADC Ch Six voltage too high alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.1.35.1 |
aprisaXETxADCChSixHiAlarmStatusThe status of the transmitter ADC Ch Six voltage too high alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.35.2 |
aprisaXETxADCChSixHiAlarmSeverityThe severity of the transmitter ADC Ch Six voltage too high alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.35.3 |
aprisaXETxADCChSixHiAlarmEnabledIndicates whether the transmitter ADC Ch Six voltage too high alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.35.4 |
aprisaXETxADCChSixHiAlarmThresholdIndicates the level at which the transmitter ADC Ch Six voltage too high
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.35.5 |
aprisaXETxADCChSixHiAlarmClearThresholdIndicates the level at which the transmitter ADC Ch Six voltage too high
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.35.6 |
aprisaXETxADCChSixLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.36 |
aprisaXETxADCChSixLoAlarmNameThe name of the transmitter ADC Ch Six voltage too low alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.1.36.1 |
aprisaXETxADCChSixLoAlarmStatusThe status of the transmitter ADC Ch Six voltage too low alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.36.2 |
aprisaXETxADCChSixLoAlarmSeverityThe severity of the transmitter ADC Ch Six voltage too low alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.36.3 |
aprisaXETxADCChSixLoAlarmEnabledIndicates whether the transmitter ADC Ch Six voltage too low alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.36.4 |
aprisaXETxADCChSixLoAlarmThresholdIndicates the level at wLoch the transmitter ADC Ch Six voltage too low
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.36.5 |
aprisaXETxADCChSixLoAlarmClearThresholdIndicates the level at wLoch the transmitter ADC Ch Six voltage too low
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.36.6 |
aprisaXETxADCChSevenHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.37 |
aprisaXETxADCChSevenHiAlarmNameThe name of the transmitter ADC Ch Seven voltage too high alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.1.37.1 |
aprisaXETxADCChSevenHiAlarmStatusThe status of the transmitter ADC Ch Seven voltage too high alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.37.2 |
aprisaXETxADCChSevenHiAlarmSeverityThe severity of the transmitter ADC Ch Seven voltage too high alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.37.3 |
aprisaXETxADCChSevenHiAlarmEnabledIndicates whether the transmitter ADC Ch Seven voltage too high alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.37.4 |
aprisaXETxADCChSevenHiAlarmThresholdIndicates the level at which the transmitter ADC Ch Seven voltage too high
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.37.5 |
aprisaXETxADCChSevenHiAlarmClearThresholdIndicates the level at which the transmitter ADC Ch Seven voltage too high
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.37.6 |
aprisaXETxADCChSevenLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.38 |
aprisaXETxADCChSevenLoAlarmNameThe name of the transmitter ADC Ch Seven voltage too low alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.1.38.1 |
aprisaXETxADCChSevenLoAlarmStatusThe status of the transmitter ADC Ch Seven voltage too low alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.38.2 |
aprisaXETxADCChSevenLoAlarmSeverityThe severity of the transmitter ADC Ch Seven voltage too low alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.38.3 |
aprisaXETxADCChSevenLoAlarmEnabledIndicates whether the transmitter ADC Ch Seven voltage too low alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.38.4 |
aprisaXETxADCChSevenLoAlarmThresholdIndicates the level at wLoch the transmitter ADC Ch Seven voltage too low
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.38.5 |
aprisaXETxADCChSevenLoAlarmClearThresholdIndicates the level at wLoch the transmitter ADC Ch Seven voltage too low
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.38.6 |
aprisaXETxADCChEightHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.39 |
aprisaXETxADCChEightHiAlarmNameThe name of the transmitter ADC Ch Eight voltage too high alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.1.39.1 |
aprisaXETxADCChEightHiAlarmStatusThe status of the transmitter ADC Ch Eight voltage too high alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.39.2 |
aprisaXETxADCChEightHiAlarmSeverityThe severity of the transmitter ADC Ch Eight voltage too high alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.39.3 |
aprisaXETxADCChEightHiAlarmEnabledIndicates whether the transmitter ADC Ch Eight voltage too high alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.39.4 |
aprisaXETxADCChEightHiAlarmThresholdIndicates the level at which the transmitter ADC Ch Eight voltage too high
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.39.5 |
aprisaXETxADCChEightHiAlarmClearThresholdIndicates the level at which the transmitter ADC Ch Eight voltage too high
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.39.6 |
aprisaXETxADCChEightLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.40 |
aprisaXETxADCChEightLoAlarmNameThe name of the transmitter ADC Ch Eight voltage too low alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.1.40.1 |
aprisaXETxADCChEightLoAlarmStatusThe status of the transmitter ADC Ch Eight voltage too low alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.40.2 |
aprisaXETxADCChEightLoAlarmSeverityThe severity of the transmitter ADC Ch Eight voltage too low alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.40.3 |
aprisaXETxADCChEightLoAlarmEnabledIndicates whether the transmitter ADC Ch Eight voltage too low alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.40.4 |
aprisaXETxADCChEightLoAlarmThresholdIndicates the level at wLoch the transmitter ADC Ch Eight voltage too low
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.40.5 |
aprisaXETxADCChEightLoAlarmClearThresholdIndicates the level at wLoch the transmitter ADC Ch Eight voltage too low
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.40.6 |
aprisaXETxADCChNineHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.41 |
aprisaXETxADCChNineHiAlarmNameThe name of the transmitter ADC Ch Nine voltage too high alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.1.41.1 |
aprisaXETxADCChNineHiAlarmStatusThe status of the transmitter ADC Ch Nine voltage too high alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.41.2 |
aprisaXETxADCChNineHiAlarmSeverityThe severity of the transmitter ADC Ch Nine voltage too high alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.41.3 |
aprisaXETxADCChNineHiAlarmEnabledIndicates whether the transmitter ADC Ch Nine voltage too high alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.41.4 |
aprisaXETxADCChNineHiAlarmThresholdIndicates the level at which the transmitter ADC Ch Nine voltage too high
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.41.5 |
aprisaXETxADCChNineHiAlarmClearThresholdIndicates the level at which the transmitter ADC Ch Nine voltage too high
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.41.6 |
aprisaXETxADCChNineLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.42 |
aprisaXETxADCChNineLoAlarmNameThe name of the transmitter ADC Ch Nine voltage too low alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.1.42.1 |
aprisaXETxADCChNineLoAlarmStatusThe status of the transmitter ADC Ch Nine voltage too low alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.42.2 |
aprisaXETxADCChNineLoAlarmSeverityThe severity of the transmitter ADC Ch Nine voltage too low alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.42.3 |
aprisaXETxADCChNineLoAlarmEnabledIndicates whether the transmitter ADC Ch Nine voltage too low alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.42.4 |
aprisaXETxADCChNineLoAlarmThresholdIndicates the level at wLoch the transmitter ADC Ch Nine voltage too low
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.42.5 |
aprisaXETxADCChNineLoAlarmClearThresholdIndicates the level at wLoch the transmitter ADC Ch Nine voltage too low
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.42.6 |
aprisaXETxADCChTenHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.43 |
aprisaXETxADCChTenHiAlarmNameThe name of the transmitter ADC Ch Ten voltage too high alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.1.43.1 |
aprisaXETxADCChTenHiAlarmStatusThe status of the transmitter ADC Ch Ten voltage too high alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.43.2 |
aprisaXETxADCChTenHiAlarmSeverityThe severity of the transmitter ADC Ch Ten voltage too high alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.43.3 |
aprisaXETxADCChTenHiAlarmEnabledIndicates whether the transmitter ADC Ch Ten voltage too high alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.43.4 |
aprisaXETxADCChTenHiAlarmThresholdIndicates the level at which the transmitter ADC Ch Ten voltage too high
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.43.5 |
aprisaXETxADCChTenHiAlarmClearThresholdIndicates the level at which the transmitter ADC Ch Ten voltage too high
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.43.6 |
aprisaXETxADCChTenLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.44 |
aprisaXETxADCChTenLoAlarmNameThe name of the transmitter ADC Ch Ten voltage too low alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.1.44.1 |
aprisaXETxADCChTenLoAlarmStatusThe status of the transmitter ADC Ch Ten voltage too low alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.44.2 |
aprisaXETxADCChTenLoAlarmSeverityThe severity of the transmitter ADC Ch Ten voltage too low alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.44.3 |
aprisaXETxADCChTenLoAlarmEnabledIndicates whether the transmitter ADC Ch Ten voltage too low alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.44.4 |
aprisaXETxADCChTenLoAlarmThresholdIndicates the level at wLoch the transmitter ADC Ch Ten voltage too low
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.44.5 |
aprisaXETxADCChTenLoAlarmClearThresholdIndicates the level at wLoch the transmitter ADC Ch Ten voltage too low
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.44.6 |
aprisaXETxADCChElevenHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.45 |
aprisaXETxADCChElevenHiAlarmNameThe name of the transmitter ADC Ch Eleven voltage too high alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.1.45.1 |
aprisaXETxADCChElevenHiAlarmStatusThe status of the transmitter ADC Ch Eleven voltage too high alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.45.2 |
aprisaXETxADCChElevenHiAlarmSeverityThe severity of the transmitter ADC Ch Eleven voltage too high alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.45.3 |
aprisaXETxADCChElevenHiAlarmEnabledIndicates whether the transmitter ADC Ch Eleven voltage too high alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.45.4 |
aprisaXETxADCChElevenHiAlarmThresholdIndicates the level at which the transmitter ADC Ch Eleven voltage too high
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.45.5 |
aprisaXETxADCChElevenHiAlarmClearThresholdIndicates the level at which the transmitter ADC Ch Eleven voltage too high
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.45.6 |
aprisaXETxADCChElevenLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.1.46 |
aprisaXETxADCChElevenLoAlarmNameThe name of the transmitter ADC Ch Eleven voltage too low alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.1.46.1 |
aprisaXETxADCChElevenLoAlarmStatusThe status of the transmitter ADC Ch Eleven voltage too low alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.46.2 |
aprisaXETxADCChElevenLoAlarmSeverityThe severity of the transmitter ADC Ch Eleven voltage too low alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.46.3 |
aprisaXETxADCChElevenLoAlarmEnabledIndicates whether the transmitter ADC Ch Eleven voltage too low alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.1.46.4 |
aprisaXETxADCChElevenLoAlarmThresholdIndicates the level at wLoch the transmitter ADC Ch Eleven voltage too low
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.46.5 |
aprisaXETxADCChElevenLoAlarmClearThresholdIndicates the level at wLoch the transmitter ADC Ch Eleven voltage too low
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.1.46.6 |
aprisaXEReceiverAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6 |
aprisaXERxSynthOutOfLockAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.1 |
aprisaXERxSynthOutOfLockAlarmStatusThe status of the Synth out of lock alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.1.1 |
aprisaXERxSynthOutOfLockAlarmSeverityThe severity of the Synth out of lock alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.1.2 |
aprisaXERxSynthOutOfLockAlarmEnabledIndicates whether the Synth out of lock alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.1.3 |
aprisaXERx12VAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.3 |
aprisaXERx12VAlarmStatusThe status of the 12V supply alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.3.1 |
aprisaXERx12VAlarmSeverityThe severity of the 12V supply aprisaXERxVtuneLoAlarmalarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.3.2 |
aprisaXERx12VAlarmEnabledIndicates whether the 12V supply alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.3.3 |
aprisaXERx3V3HiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.4 |
aprisaXERx3V3HiAlarmStatusThe status of the 3.3V supply high alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.4.1 |
aprisaXERx3V3HiAlarmSeverityThe severity of the 3.3V supply high alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.4.2 |
aprisaXERx3V3HiAlarmEnabledIndicates whether the 3.3V supply high alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.4.3 |
aprisaXERx3V3HiAlarmThresholdIndicates the level at which the 3.3V supply high
alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.4.4 |
aprisaXERx3V3HiAlarmClearThresholdIndicates the level at which the 3.3V supply high
will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.4.5 |
aprisaXERx3V3LoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.5 |
aprisaXERx3V3LoAlarmStatusThe status of the 3.3V supply low alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.5.1 |
aprisaXERx3V3LoAlarmSeverityThe severity of the 3.3V supply low alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.5.2 |
aprisaXERx3V3LoAlarmEnabledIndicates whether the 3.3V supply low alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.5.3 |
aprisaXERx3V3LoAlarmThresholdIndicates the level at which the 3.3V supply low
alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.5.4 |
aprisaXERx3V3LoAlarmClearThresholdIndicates the level at which the 3.3V supply low
will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.5.5 |
aprisaXERx5VHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.6 |
aprisaXERx5VHiAlarmStatusThe status of the 5V supply High alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.6.1 |
aprisaXERx5VHiAlarmSeverityThe severity of the 5V supply High alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.6.2 |
aprisaXERx5VHiAlarmEnabledIndicates whether the 5V supply High alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.6.3 |
aprisaXERx5VHiAlarmThresholdIndicates the level at which the 5V supply High
alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.6.4 |
aprisaXERx5VHiAlarmClearThresholdIndicates the level at which the 5V supply High
will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.6.5 |
aprisaXERx5VLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.7 |
aprisaXERx5VLoAlarmStatusThe status of the 5V supply low alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.7.1 |
aprisaXERx5VLoAlarmSeverityThe severity of the 5V supply low alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.7.2 |
aprisaXERx5VLoAlarmEnabledIndicates whether the 5V supply low alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.7.3 |
aprisaXERx5VLoAlarmThresholdIndicates the level at which the 5V supply low
alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.7.4 |
aprisaXERx5VLoAlarmClearThresholdIndicates the level at which the 5V supply low
will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.7.5 |
aprisaXERx9VHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.8 |
aprisaXERx9VHiAlarmStatusThe status of the 9V supply High alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.8.1 |
aprisaXERx9VHiAlarmSeverityThe severity of the 9V supply High alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.8.2 |
aprisaXERx9VHiAlarmEnabledIndicates whether the 9V supply High alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.8.3 |
aprisaXERx9VHiAlarmThresholdIndicates the level at which the 9V supply High
alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.8.4 |
aprisaXERx9VHiAlarmClearThresholdIndicates the level at which the 9V supply High
will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.8.5 |
aprisaXERx9VLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.9 |
aprisaXERx9VLoAlarmStatusThe status of the 9V supply low alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.9.1 |
aprisaXERx9VLoAlarmSeverityThe severity of the 9V supply low alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.9.2 |
aprisaXERx9VLoAlarmEnabledIndicates whether the 9V supply low alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.9.3 |
aprisaXERx9VLoAlarmThresholdIndicates the level at which the 9V supply low
alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.9.4 |
aprisaXERx9VLoAlarmClearThresholdIndicates the level at which the 9V supply low
will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.9.5 |
aprisaXERxNeg1V5HiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.10 |
aprisaXERxNeg1V5HiAlarmStatusThe status of the Neg 1.5V supply High alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.10.1 |
aprisaXERxNeg1V5HiAlarmSeverityThe severity of the Neg 1.5V supply High alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.10.2 |
aprisaXERxNeg1V5HiAlarmEnabledIndicates whether the Neg 1.5V supply High alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.10.3 |
aprisaXERxNeg1V5HiAlarmThresholdIndicates the level at which the Neg 1.5V supply High
alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.10.4 |
aprisaXERxNeg1V5HiAlarmClearThresholdIndicates the level at which the Neg 1.5V supply High
will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.10.5 |
aprisaXERxNeg1V5LoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.11 |
aprisaXERxNeg1V5LoAlarmStatusThe status of the Neg 1.5V supply low alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.11.1 |
aprisaXERxNeg1V5LoAlarmSeverityThe severity of the Neg 1.5V supply low alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.11.2 |
aprisaXERxNeg1V5LoAlarmEnabledIndicates whether the Neg 1.5V supply low alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.11.3 |
aprisaXERxNeg1V5LoAlarmThresholdIndicates the level at which the Neg 1.5V supply low
alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.11.4 |
aprisaXERxNeg1V5LoAlarmClearThresholdIndicates the level at which the Neg 1.5V supply low
will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.11.5 |
aprisaXERxAgcHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.12 |
aprisaXERxAgcHiAlarmStatusThe status of the AGC high alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.12.1 |
aprisaXERxAgcHiAlarmSeverityThe severity of the AGC high alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.12.2 |
aprisaXERxAgcHiAlarmEnabledIndicates whether the AGC high alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.12.3 |
aprisaXERxAgcHiAlarmThresholdIndicates the level at which the AGC high
alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.12.4 |
aprisaXERxAgcHiAlarmClearThresholdIndicates the level at which the AGC high
will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.12.5 |
aprisaXERxAgcLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.13 |
aprisaXERxAgcLoAlarmStatusThe status of the AGC low alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.13.1 |
aprisaXERxAgcLoAlarmSeverityThe severity of the AGC low alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.13.2 |
aprisaXERxAgcLoAlarmEnabledIndicates whether the AGC low alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.13.3 |
aprisaXERxAgcLoAlarmThresholdIndicates the level at which the AGC low
alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.13.4 |
aprisaXERxAgcLoAlarmClearThresholdIndicates the level at which the AGC low
will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.13.5 |
aprisaXERxRssiHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.14 |
aprisaXERxRssiHiAlarmStatusThe status of the RSSI High alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.14.1 |
aprisaXERxRssiHiAlarmSeverityThe severity of the RSSI High alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.14.2 |
aprisaXERxRssiHiAlarmEnabledIndicates whether the RSSI High alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.14.3 |
aprisaXERxRssiHiAlarmThresholdIndicates the level at which the RSSI High
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.14.4 |
aprisaXERxRssiHiAlarmClearThresholdIndicates the level at which the RSSI High
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.14.5 |
aprisaXERxRssiLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.15 |
aprisaXERxRssiLoAlarmStatusThe status of the RSSI low alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.15.1 |
aprisaXERxRssiLoAlarmSeverityThe severity of the RSSI low alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.15.2 |
aprisaXERxRssiLoAlarmEnabledIndicates whether the RSSI low alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.15.3 |
aprisaXERxRssiLoAlarmThresholdIndicates the level at which the RSSI low
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.15.4 |
aprisaXERxRssiLoAlarmClearThresholdIndicates the level at which the RSSI low
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.15.5 |
aprisaXERxVtuneHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.16 |
aprisaXERxVtuneHiAlarmStatusThe status of the Vtune High alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.16.1 |
aprisaXERxVtuneHiAlarmSeverityThe severity of the Vtune High alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.16.2 |
aprisaXERxVtuneHiAlarmEnabledIndicates whether the Vtune High alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.16.3 |
aprisaXERxVtuneHiAlarmThresholdIndicates the level at which the Vtune High
alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.16.4 |
aprisaXERxVtuneHiAlarmClearThresholdIndicates the level at which the Vtune High
will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.16.5 |
aprisaXERxVtuneLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.17 |
aprisaXERxVtuneLoAlarmStatusThe status of the Vtune low alarm.roobsolete FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.17.1 |
aprisaXERxVtuneLoAlarmSeverityThe severity of the Vtune low alarm.roobsolete FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.17.2 |
aprisaXERxVtuneLoAlarmEnabledIndicates whether the Vtune low alarm is enabled.roobsolete FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.17.3 |
aprisaXERxVtuneLoAlarmThresholdIndicates the level at which the Vtune low
alarm will be set.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.17.4 |
aprisaXERxVtuneLoAlarmClearThresholdIndicates the level at which the Vtune low
will be cleared.roobsolete Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.17.5 |
aprisaXERxEEAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.18 |
aprisaXERxEEAlarmStatusThe status of the EEPROM alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.18.1 |
aprisaXERxEEAlarmSeverityThe severity of the EEPROM alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.18.2 |
aprisaXERxEEAlarmEnabledIndicates whether the EEPROM alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.18.3 |
aprisaXERxADCChZeroHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.19 |
aprisaXERxADCChZeroHiAlarmNameThe name of the receiver ADC Ch Zero voltage too high alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.6.19.1 |
aprisaXERxADCChZeroHiAlarmStatusThe status of the receiver ADC Ch Zero voltage too high alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.19.2 |
aprisaXERxADCChZeroHiAlarmSeverityThe severity of the receiver ADC Ch Zero voltage too high alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.19.3 |
aprisaXERxADCChZeroHiAlarmEnabledIndicates whether the receiver ADC Ch Zero voltage too high alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.19.4 |
aprisaXERxADCChZeroHiAlarmThresholdIndicates the level at which the receiver ADC Ch Zero voltage too high
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.19.5 |
aprisaXERxADCChZeroHiAlarmClearThresholdIndicates the level at which the receiver ADC Ch Zero voltage too high
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.19.6 |
aprisaXERxADCChZeroLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.20 |
aprisaXERxADCChZeroLoAlarmNameThe name of the receiver ADC Ch Zero voltage too low alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.6.20.1 |
aprisaXERxADCChZeroLoAlarmStatusThe status of the receiver ADC Ch Zero voltage too low alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.20.2 |
aprisaXERxADCChZeroLoAlarmSeverityThe severity of the receiver ADC Ch Zero voltage too low alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.20.3 |
aprisaXERxADCChZeroLoAlarmEnabledIndicates whether the receiver ADC Ch Zero voltage too low alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.20.4 |
aprisaXERxADCChZeroLoAlarmThresholdIndicates the level at wLoch the receiver ADC Ch Zero voltage too low
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.20.5 |
aprisaXERxADCChZeroLoAlarmClearThresholdIndicates the level at wLoch the receiver ADC Ch Zero voltage too low
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.20.6 |
aprisaXERxADCChOneHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.21 |
aprisaXERxADCChOneHiAlarmNameThe name of the receiver ADC Ch One voltage too high alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.6.21.1 |
aprisaXERxADCChOneHiAlarmStatusThe status of the receiver ADC Ch One voltage too high alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.21.2 |
aprisaXERxADCChOneHiAlarmSeverityThe severity of the receiver ADC Ch One voltage too high alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.21.3 |
aprisaXERxADCChOneHiAlarmEnabledIndicates whether the receiver ADC Ch One voltage too high alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.21.4 |
aprisaXERxADCChOneHiAlarmThresholdIndicates the level at which the receiver ADC Ch One voltage too high
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.21.5 |
aprisaXERxADCChOneHiAlarmClearThresholdIndicates the level at which the receiver ADC Ch One voltage too high
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.21.6 |
aprisaXERxADCChOneLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.22 |
aprisaXERxADCChOneLoAlarmNameThe name of the receiver ADC Ch One voltage too low alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.6.22.1 |
aprisaXERxADCChOneLoAlarmStatusThe status of the receiver ADC Ch One voltage too low alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.22.2 |
aprisaXERxADCChOneLoAlarmSeverityThe severity of the receiver ADC Ch One voltage too low alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.22.3 |
aprisaXERxADCChOneLoAlarmEnabledIndicates whether the receiver ADC Ch One voltage too low alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.22.4 |
aprisaXERxADCChOneLoAlarmThresholdIndicates the level at wLoch the receiver ADC Ch One voltage too low
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.22.5 |
aprisaXERxADCChOneLoAlarmClearThresholdIndicates the level at wLoch the receiver ADC Ch One voltage too low
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.22.6 |
aprisaXERxADCChTwoHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.23 |
aprisaXERxADCChTwoHiAlarmNameThe name of the receiver ADC Ch Two voltage too high alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.6.23.1 |
aprisaXERxADCChTwoHiAlarmStatusThe status of the receiver ADC Ch Two voltage too high alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.23.2 |
aprisaXERxADCChTwoHiAlarmSeverityThe severity of the receiver ADC Ch Two voltage too high alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.23.3 |
aprisaXERxADCChTwoHiAlarmEnabledIndicates whether the receiver ADC Ch Two voltage too high alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.23.4 |
aprisaXERxADCChTwoHiAlarmThresholdIndicates the level at which the receiver ADC Ch Two voltage too high
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.23.5 |
aprisaXERxADCChTwoHiAlarmClearThresholdIndicates the level at which the receiver ADC Ch Two voltage too high
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.23.6 |
aprisaXERxADCChTwoLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.24 |
aprisaXERxADCChTwoLoAlarmNameThe name of the receiver ADC Ch Two voltage too low alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.6.24.1 |
aprisaXERxADCChTwoLoAlarmStatusThe status of the receiver ADC Ch Two voltage too low alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.24.2 |
aprisaXERxADCChTwoLoAlarmSeverityThe severity of the receiver ADC Ch Two voltage too low alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.24.3 |
aprisaXERxADCChTwoLoAlarmEnabledIndicates whether the receiver ADC Ch Two voltage too low alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.24.4 |
aprisaXERxADCChTwoLoAlarmThresholdIndicates the level at wLoch the receiver ADC Ch Two voltage too low
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.24.5 |
aprisaXERxADCChTwoLoAlarmClearThresholdIndicates the level at wLoch the receiver ADC Ch Two voltage too low
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.24.6 |
aprisaXERxADCChThreeHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.25 |
aprisaXERxADCChThreeHiAlarmNameThe name of the receiver ADC Ch Three voltage too high alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.6.25.1 |
aprisaXERxADCChThreeHiAlarmStatusThe status of the receiver ADC Ch Three voltage too high alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.25.2 |
aprisaXERxADCChThreeHiAlarmSeverityThe severity of the receiver ADC Ch Three voltage too high alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.25.3 |
aprisaXERxADCChThreeHiAlarmEnabledIndicates whether the receiver ADC Ch Three voltage too high alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.25.4 |
aprisaXERxADCChThreeHiAlarmThresholdIndicates the level at which the receiver ADC Ch Three voltage too high
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.25.5 |
aprisaXERxADCChThreeHiAlarmClearThresholdIndicates the level at which the receiver ADC Ch Three voltage too high
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.25.6 |
aprisaXERxADCChThreeLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.26 |
aprisaXERxADCChThreeLoAlarmNameThe name of the receiver ADC Ch Three voltage too low alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.6.26.1 |
aprisaXERxADCChThreeLoAlarmStatusThe status of the receiver ADC Ch Three voltage too low alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.26.2 |
aprisaXERxADCChThreeLoAlarmSeverityThe severity of the receiver ADC Ch Three voltage too low alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.26.3 |
aprisaXERxADCChThreeLoAlarmEnabledIndicates whether the receiver ADC Ch Three voltage too low alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.26.4 |
aprisaXERxADCChThreeLoAlarmThresholdIndicates the level at wLoch the receiver ADC Ch Three voltage too low
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.26.5 |
aprisaXERxADCChThreeLoAlarmClearThresholdIndicates the level at wLoch the receiver ADC Ch Three voltage too low
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.26.6 |
aprisaXERxADCChFourHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.27 |
aprisaXERxADCChFourHiAlarmNameThe name of the receiver ADC Ch Four voltage too high alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.6.27.1 |
aprisaXERxADCChFourHiAlarmStatusThe status of the receiver ADC Ch Four voltage too high alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.27.2 |
aprisaXERxADCChFourHiAlarmSeverityThe severity of the receiver ADC Ch Four voltage too high alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.27.3 |
aprisaXERxADCChFourHiAlarmEnabledIndicates whether the receiver ADC Ch Four voltage too high alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.27.4 |
aprisaXERxADCChFourHiAlarmThresholdIndicates the level at which the receiver ADC Ch Four voltage too high
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.27.5 |
aprisaXERxADCChFourHiAlarmClearThresholdIndicates the level at which the receiver ADC Ch Four voltage too high
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.27.6 |
aprisaXERxADCChFourLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.28 |
aprisaXERxADCChFourLoAlarmNameThe name of the receiver ADC Ch Four voltage too low alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.6.28.1 |
aprisaXERxADCChFourLoAlarmStatusThe status of the receiver ADC Ch Four voltage too low alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.28.2 |
aprisaXERxADCChFourLoAlarmSeverityThe severity of the receiver ADC Ch Four voltage too low alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.28.3 |
aprisaXERxADCChFourLoAlarmEnabledIndicates whether the receiver ADC Ch Four voltage too low alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.28.4 |
aprisaXERxADCChFourLoAlarmThresholdIndicates the level at wLoch the receiver ADC Ch Four voltage too low
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.28.5 |
aprisaXERxADCChFourLoAlarmClearThresholdIndicates the level at wLoch the receiver ADC Ch Four voltage too low
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.28.6 |
aprisaXERxADCChFiveHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.29 |
aprisaXERxADCChFiveHiAlarmNameThe name of the receiver ADC Ch Five voltage too high alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.6.29.1 |
aprisaXERxADCChFiveHiAlarmStatusThe status of the receiver ADC Ch Five voltage too high alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.29.2 |
aprisaXERxADCChFiveHiAlarmSeverityThe severity of the receiver ADC Ch Five voltage too high alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.29.3 |
aprisaXERxADCChFiveHiAlarmEnabledIndicates whether the receiver ADC Ch Five voltage too high alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.29.4 |
aprisaXERxADCChFiveHiAlarmThresholdIndicates the level at which the receiver ADC Ch Five voltage too high
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.29.5 |
aprisaXERxADCChFiveHiAlarmClearThresholdIndicates the level at which the receiver ADC Ch Five voltage too high
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.29.6 |
aprisaXERxADCChFiveLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.30 |
aprisaXERxADCChFiveLoAlarmNameThe name of the receiver ADC Ch Five voltage too low alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.6.30.1 |
aprisaXERxADCChFiveLoAlarmStatusThe status of the receiver ADC Ch Five voltage too low alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.30.2 |
aprisaXERxADCChFiveLoAlarmSeverityThe severity of the receiver ADC Ch Five voltage too low alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.30.3 |
aprisaXERxADCChFiveLoAlarmEnabledIndicates whether the receiver ADC Ch Five voltage too low alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.30.4 |
aprisaXERxADCChFiveLoAlarmThresholdIndicates the level at wLoch the receiver ADC Ch Five voltage too low
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.30.5 |
aprisaXERxADCChFiveLoAlarmClearThresholdIndicates the level at wLoch the receiver ADC Ch Five voltage too low
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.30.6 |
aprisaXERxADCChSixHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.31 |
aprisaXERxADCChSixHiAlarmNameThe name of the receiver ADC Ch Six voltage too high alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.6.31.1 |
aprisaXERxADCChSixHiAlarmStatusThe status of the receiver ADC Ch Six voltage too high alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.31.2 |
aprisaXERxADCChSixHiAlarmSeverityThe severity of the receiver ADC Ch Six voltage too high alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.31.3 |
aprisaXERxADCChSixHiAlarmEnabledIndicates whether the receiver ADC Ch Six voltage too high alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.31.4 |
aprisaXERxADCChSixHiAlarmThresholdIndicates the level at which the receiver ADC Ch Six voltage too high
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.31.5 |
aprisaXERxADCChSixHiAlarmClearThresholdIndicates the level at which the receiver ADC Ch Six voltage too high
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.31.6 |
aprisaXERxADCChSixLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.32 |
aprisaXERxADCChSixLoAlarmNameThe name of the receiver ADC Ch Six voltage too low alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.6.32.1 |
aprisaXERxADCChSixLoAlarmStatusThe status of the receiver ADC Ch Six voltage too low alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.32.2 |
aprisaXERxADCChSixLoAlarmSeverityThe severity of the receiver ADC Ch Six voltage too low alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.32.3 |
aprisaXERxADCChSixLoAlarmEnabledIndicates whether the receiver ADC Ch Six voltage too low alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.32.4 |
aprisaXERxADCChSixLoAlarmThresholdIndicates the level at wLoch the receiver ADC Ch Six voltage too low
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.32.5 |
aprisaXERxADCChSixLoAlarmClearThresholdIndicates the level at wLoch the receiver ADC Ch Six voltage too low
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.32.6 |
aprisaXERxADCChSevenHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.33 |
aprisaXERxADCChSevenHiAlarmNameThe name of the receiver ADC Ch Seven voltage too high alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.6.33.1 |
aprisaXERxADCChSevenHiAlarmStatusThe status of the receiver ADC Ch Seven voltage too high alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.33.2 |
aprisaXERxADCChSevenHiAlarmSeverityThe severity of the receiver ADC Ch Seven voltage too high alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.33.3 |
aprisaXERxADCChSevenHiAlarmEnabledIndicates whether the receiver ADC Ch Seven voltage too high alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.33.4 |
aprisaXERxADCChSevenHiAlarmThresholdIndicates the level at which the receiver ADC Ch Seven voltage too high
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.33.5 |
aprisaXERxADCChSevenHiAlarmClearThresholdIndicates the level at which the receiver ADC Ch Seven voltage too high
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.33.6 |
aprisaXERxADCChSevenLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.34 |
aprisaXERxADCChSevenLoAlarmNameThe name of the receiver ADC Ch Seven voltage too low alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.6.34.1 |
aprisaXERxADCChSevenLoAlarmStatusThe status of the receiver ADC Ch Seven voltage too low alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.34.2 |
aprisaXERxADCChSevenLoAlarmSeverityThe severity of the receiver ADC Ch Seven voltage too low alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.34.3 |
aprisaXERxADCChSevenLoAlarmEnabledIndicates whether the receiver ADC Ch Seven voltage too low alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.34.4 |
aprisaXERxADCChSevenLoAlarmThresholdIndicates the level at wLoch the receiver ADC Ch Seven voltage too low
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.34.5 |
aprisaXERxADCChSevenLoAlarmClearThresholdIndicates the level at wLoch the receiver ADC Ch Seven voltage too low
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.34.6 |
aprisaXERxADCChEightHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.35 |
aprisaXERxADCChEightHiAlarmNameThe name of the receiver ADC Ch Eight voltage too high alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.6.35.1 |
aprisaXERxADCChEightHiAlarmStatusThe status of the receiver ADC Ch Eight voltage too high alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.35.2 |
aprisaXERxADCChEightHiAlarmSeverityThe severity of the receiver ADC Ch Eight voltage too high alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.35.3 |
aprisaXERxADCChEightHiAlarmEnabledIndicates whether the receiver ADC Ch Eight voltage too high alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.35.4 |
aprisaXERxADCChEightHiAlarmThresholdIndicates the level at which the receiver ADC Ch Eight voltage too high
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.35.5 |
aprisaXERxADCChEightHiAlarmClearThresholdIndicates the level at which the receiver ADC Ch Eight voltage too high
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.35.6 |
aprisaXERxADCChEightLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.36 |
aprisaXERxADCChEightLoAlarmNameThe name of the receiver ADC Ch Eight voltage too low alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.6.36.1 |
aprisaXERxADCChEightLoAlarmStatusThe status of the receiver ADC Ch Eight voltage too low alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.36.2 |
aprisaXERxADCChEightLoAlarmSeverityThe severity of the receiver ADC Ch Eight voltage too low alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.36.3 |
aprisaXERxADCChEightLoAlarmEnabledIndicates whether the receiver ADC Ch Eight voltage too low alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.36.4 |
aprisaXERxADCChEightLoAlarmThresholdIndicates the level at wLoch the receiver ADC Ch Eight voltage too low
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.36.5 |
aprisaXERxADCChEightLoAlarmClearThresholdIndicates the level at wLoch the receiver ADC Ch Eight voltage too low
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.36.6 |
aprisaXERxADCChNineHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.37 |
aprisaXERxADCChNineHiAlarmNameThe name of the receiver ADC Ch Nine voltage too high alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.6.37.1 |
aprisaXERxADCChNineHiAlarmStatusThe status of the receiver ADC Ch Nine voltage too high alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.37.2 |
aprisaXERxADCChNineHiAlarmSeverityThe severity of the receiver ADC Ch Nine voltage too high alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.37.3 |
aprisaXERxADCChNineHiAlarmEnabledIndicates whether the receiver ADC Ch Nine voltage too high alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.37.4 |
aprisaXERxADCChNineHiAlarmThresholdIndicates the level at which the receiver ADC Ch Nine voltage too high
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.37.5 |
aprisaXERxADCChNineHiAlarmClearThresholdIndicates the level at which the receiver ADC Ch Nine voltage too high
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.37.6 |
aprisaXERxADCChNineLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.38 |
aprisaXERxADCChNineLoAlarmNameThe name of the receiver ADC Ch Nine voltage too low alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.6.38.1 |
aprisaXERxADCChNineLoAlarmStatusThe status of the receiver ADC Ch Nine voltage too low alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.38.2 |
aprisaXERxADCChNineLoAlarmSeverityThe severity of the receiver ADC Ch Nine voltage too low alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.38.3 |
aprisaXERxADCChNineLoAlarmEnabledIndicates whether the receiver ADC Ch Nine voltage too low alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.38.4 |
aprisaXERxADCChNineLoAlarmThresholdIndicates the level at wLoch the receiver ADC Ch Nine voltage too low
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.38.5 |
aprisaXERxADCChNineLoAlarmClearThresholdIndicates the level at wLoch the receiver ADC Ch Nine voltage too low
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.38.6 |
aprisaXERxADCChTenHiAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.39 |
aprisaXERxADCChTenHiAlarmNameThe name of the receiver ADC Ch Ten voltage too high alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.6.39.1 |
aprisaXERxADCChTenHiAlarmStatusThe status of the receiver ADC Ch Ten voltage too high alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.39.2 |
aprisaXERxADCChTenHiAlarmSeverityThe severity of the receiver ADC Ch Ten voltage too high alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.39.3 |
aprisaXERxADCChTenHiAlarmEnabledIndicates whether the receiver ADC Ch Ten voltage too high alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.39.4 |
aprisaXERxADCChTenHiAlarmThresholdIndicates the level at which the receiver ADC Ch Ten voltage too high
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.39.5 |
aprisaXERxADCChTenHiAlarmClearThresholdIndicates the level at which the receiver ADC Ch Ten voltage too high
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.39.6 |
aprisaXERxADCChTenLoAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.6.40 |
aprisaXERxADCChTenLoAlarmNameThe name of the receiver ADC Ch Ten voltage too low alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14817.7.3.1.2.86.6.40.1 |
aprisaXERxADCChTenLoAlarmStatusThe status of the receiver ADC Ch Ten voltage too low alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.40.2 |
aprisaXERxADCChTenLoAlarmSeverityThe severity of the receiver ADC Ch Ten voltage too low alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.40.3 |
aprisaXERxADCChTenLoAlarmEnabledIndicates whether the receiver ADC Ch Ten voltage too low alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.6.40.4 |
aprisaXERxADCChTenLoAlarmThresholdIndicates the level at wLoch the receiver ADC Ch Ten voltage too low
alarm will be set.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.40.5 |
aprisaXERxADCChTenLoAlarmClearThresholdIndicates the level at wLoch the receiver ADC Ch Ten voltage too low
will be cleared.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.86.6.40.6 |
aprisaXEModemAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.10 |
aprisaXEModemSyncAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.86.10.1 |
aprisaXEModemSyncAlarmStatusThe status of the loss of modem sync alarm.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.10.1.1 |
aprisaXEModemSyncAlarmSeverityThe severity of the loss of modem sync alarm.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.10.1.2 |
aprisaXEModemSyncAlarmEnabledIndicates whether the loss of modem sync alarm is enabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.86.10.1.3 |
aprisaXEQuadJetBoardTableTable of Quad E1 card specific configuration details. SEQUENCE OF AprisaXEQuadJetBoardEntry .1.3.6.1.4.1.14817.7.3.1.2.87 |
aprisaXEQuadJetBoardEntryQuad E1 configuration details. AprisaXEQuadJetBoardEntry .1.3.6.1.4.1.14817.7.3.1.2.87.1 |
aprisaXEQuadJetBoardTableIndexQuad E1 board indexed by slot.ro AprisaXESlotNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.87.1.1 |
aprisaXEQuadJetPortTableTable based on slot and port of QuadJet cards alarms. SEQUENCE OF AprisaXEQuadJetPortEntry .1.3.6.1.4.1.14817.7.3.1.2.88 |
aprisaXEQuadJetPortEntryQuad E1 port alarms. AprisaXEQuadJetPortEntry .1.3.6.1.4.1.14817.7.3.1.2.88.1 |
aprisaXEQuadJetPortTableSlotPort table index based on slot number.ro AprisaXESlotNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.88.1.1 |
aprisaXEQuadJetPortTablePortPort table index based on port number.ro AprisaXEPortNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.88.1.2 |
aprisaXEQuadJetLOFAlarmStatusRed alarm status.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.88.1.3 |
aprisaXEQuadJetLOFAlarmSeverityRed alarm severity.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.88.1.4 |
aprisaXEQuadJetLOFAlarmEnabledRed alarm enabled or disabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.88.1.5 |
aprisaXEQuadJetAISAlarmStatusAIS alarm status.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.88.1.6 |
aprisaXEQuadJetAISAlarmSeverityAIS alarm severity.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.88.1.7 |
aprisaXEQuadJetAISAlarmEnabledAIS alarm enabled or disabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.88.1.8 |
aprisaXEQuadJetRAIAlarmStatusRAI alarm status.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.88.1.9 |
aprisaXEQuadJetRAIAlarmSeverityRAI alarm severity.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.88.1.10 |
aprisaXEQuadJetRAIAlarmEnabledRAI alarm enabled or disabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.88.1.11 |
aprisaXEQuadJetRMAIAlarmStatusRMAI alarm status.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.88.1.12 |
aprisaXEQuadJetRMAIAlarmSeverityRMAI alarm severity.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.88.1.13 |
aprisaXEQuadJetRMAIAlarmEnabledRMAI alarm enabled or disabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.88.1.14 |
aprisaXEQuadJetTS16AISAlarmStatusTS16 AIS alarm status.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.88.1.15 |
aprisaXEQuadJetTS16AISAlarmSeverityTS16 AIS alarm severity.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.88.1.16 |
aprisaXEQuadJetTS16AISAlarmEnabledTS16 AIS alarm enabled or disabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.88.1.17 |
aprisaXEQuadJetTS16LOSAlarmStatusTS16 LOS alarm status.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.88.1.18 |
aprisaXEQuadJetTS16LOSAlarmSeverityTS16 LOS alarm severity.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.88.1.19 |
aprisaXEQuadJetTS16LOSAlarmEnabledTS16 LOS alarm enabled or disabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.88.1.20 |
aprisaXEQuadJetLOSAlarmStatusLOS alarm status.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.88.1.21 |
aprisaXEQuadJetLOSAlarmSeverityLOS alarm severity.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.88.1.22 |
aprisaXEQuadJetLOSAlarmEnabledLOS alarm enabled or disabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.88.1.23 |
aprisaXEQuadJetCRC4AlarmStatusCRC4 alarm status.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.88.1.24 |
aprisaXEQuadJetCRC4AlarmSeverityCRC4 alarm severity.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.88.1.25 |
aprisaXEQuadJetCRC4AlarmEnabledCRC4 alarm enabled or disabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.88.1.26 |
aprisaXEQuadJetCRC4AlarmThresholdCRC4 Threshold value for counter to alarm at.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.88.1.27 |
aprisaXEQuadJetCRC4AlarmClearThresholdCRC4 Threshold at which alarm clears.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.88.1.28 |
aprisaXEQuadJetIFConfigTableSwitch data table which describes the
allocation of user data on to the TDM busses. SEQUENCE OF AprisaXEQuadJetIFConfigEntry .1.3.6.1.4.1.14817.7.3.1.2.90 |
aprisaXEQuadJetIFConfigEntryQuad JET config data. AprisaXEQuadJetIFConfigEntry .1.3.6.1.4.1.14817.7.3.1.2.90.1 |
aprisaXEQuadJetIFConfigSlotIndexIndex to the port table based on port number.ro AprisaXESlotNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.90.1.1 |
aprisaXEQuadJetIFConfigPortIndexIndex to the port table based on port number.ro AprisaXEPortNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.90.1.2 |
aprisaXEQuadJetTrafficTypeControls the traffic type on a Quad JET port.rw AprisaXEQuadJetTrafficType (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.90.1.3 |
aprisaXEQuadJetLoopbackControls the traffic loopback on a Quad JET port.rwobsolete FourRFLoopback (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.90.1.4 |
aprisaXEQuadJetLineEncodingControls the line encoding, the default is
HDB3 for E1, B8ZS for T1.rw AprisaXEQuadJetLineEncoding (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.90.1.5 |
aprisaXEQuadJetPcmModeControls the PCM mode, PCM31 or PCM30C.rw AprisaXEPcmMode (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.90.1.6 |
aprisaXEQuadJetClockSourceControls whether the port drives the clock soure or not.rw FourRFNetworkClockSelect (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.90.1.7 |
aprisaXEQuadJetLineRadioLoopbackThis indicates the E1 loopback setting on a port;
OFF, Line or Radio Facing.rw AprisaXEQuadJetLoopbacks (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.90.1.8 |
aprisaXEQuadJetTxWaveFormShaperThis indicates the T1 Tx Waveform Shaper for a port;
0~133 ft, 133~266 ft, 266~399 ft, 399~533 ft, 533~655 ft.rw AprisaXEQuadJetWaveFormShapers (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.90.1.9 |
aprisaXEQuadJetMultiframeEnableIndicates whether support is enabled for transport of T1 SF
and ESF multiframe sync for a port.rw AprisaXEQuadJetMultiframeEnable (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.90.1.10 |
aprisaXEQuadJetIFConnectionTableInterface connection table which holds all the cross
connect information for the E1 card. SEQUENCE OF AprisaXEQuadJetIFConnectionTableEntry .1.3.6.1.4.1.14817.7.3.1.2.91 |
aprisaXEQuadJetIFConnectionTableEntryQuad JET cross connection data. AprisaXEQuadJetIFConnectionTableEntry .1.3.6.1.4.1.14817.7.3.1.2.91.1 |
aprisaXEQuadJetIFConnectionIDBackplane Connection ID.ro AprisaXEConnectionID (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.91.1.1 |
aprisaXEQuadJetIFConnectionAggregateIDAggregate ID, 0 if an unframed connection.ro AprisaXEConnectionID (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.91.1.2 |
aprisaXEQuadJetIFConnectionSlotSlot number that this card is in.ro AprisaXESlotNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.91.1.3 |
aprisaXEQuadJetIFConnectionE1PortPort number associated with this connection.ro AprisaXEPortNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.91.1.4 |
aprisaXEQuadJetIFConnectionTypeIndicates whether the connection is for data or
CAS signalling.ro AprisaXEQuadJetConnectionType (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.91.1.5 |
aprisaXEQuadJetIFConnectionControl OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.93 |
aprisaXEQuadJetIFControlConnectionIDBackplane Connection ID.rw AprisaXEConnectionID (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.93.1 |
aprisaXEQuadJetIFControlAggregateIDAggregate Connection ID.rw AprisaXEConnectionID (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.93.2 |
aprisaXEQuadJetIFConnectionControlSlotSlot number that this card is in.rw AprisaXESlotNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.93.3 |
aprisaXEQuadJetIFConnectionControlE1PortPort number associated with this connection.rw AprisaXEPortNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.93.4 |
aprisaXEQuadJetIFConnectionControlTypeIndicates whether the connection is for data or
CAS signalling.rw AprisaXEQuadJetConnectionType (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.93.5 |
aprisaXEQuadJetIFConnectionControlCommandCommand to send to act upon the rows in the QuedJet Interface
Connection table.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.93.6 |
aprisaXEEthernetConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.95 |
aprisaXEEthernetBandwidthThis controls the bandwidth allocated to
ethernet in kbps, the minimum block is
8kbps, values will be rounded up to the
nearest 8kbps.rw Unsigned32 .1.3.6.1.4.1.14817.7.3.1.2.95.1 |
aprisaXEEthernetManagementBandwidthThis controls the bandwidth available to
management traffic, a minimum of 8kbps is
required. Values will be rounded up to
the nearest 8kbps.rw Unsigned32 .1.3.6.1.4.1.14817.7.3.1.2.95.2 |
aprisaXEEthernetCustomerConnectionIDBackplane connection ID for Customer bandwidth.rw AprisaXEConnectionID (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.95.3 |
aprisaXEEthernetPBCConnectionIDBackplane connection ID for Private Back Channel
management bandwidth.rw AprisaXEConnectionID (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.95.4 |
aprisaXEEthernetPortTableTable used to control and monitor basic ethernet
features on the 4-port hub. SEQUENCE OF AprisaXEEthernetPortEntry .1.3.6.1.4.1.14817.7.3.1.2.96 |
aprisaXEEthernetPortEntryEthernet port status and configuration. AprisaXEEthernetPortEntry .1.3.6.1.4.1.14817.7.3.1.2.96.1 |
aprisaXEEthernetPortIndexThe port index, there are four ports on the hub.ro INTEGER ( 1..4 ) .1.3.6.1.4.1.14817.7.3.1.2.96.1.1 |
aprisaXEEthernetAutonegotiationStatusThe status of the port auto-negotiation.ro Enumeration .1.3.6.1.4.1.14817.7.3.1.2.96.1.2 |
aprisaXEEthernetRemoteFaultStatusThe status of the port remote fault detection.ro Enumeration .1.3.6.1.4.1.14817.7.3.1.2.96.1.3 |
aprisaXEEthernetLinkStatusThe status of the port link.ro Enumeration .1.3.6.1.4.1.14817.7.3.1.2.96.1.4 |
aprisaXEEthernetJabberStatusHas jabber been detected on the port?.ro Enumeration .1.3.6.1.4.1.14817.7.3.1.2.96.1.5 |
aprisaXEEthernetSpeedThe current port speed, 10 or 100 Mbps.ro Enumeration .1.3.6.1.4.1.14817.7.3.1.2.96.1.6 |
aprisaXEEthernetDuplexModeThe current port duplex mode.ro Enumeration .1.3.6.1.4.1.14817.7.3.1.2.96.1.7 |
aprisaXEEthernetTableTable used to display and configure Ethernet settings. SEQUENCE OF AprisaXEEthernetTableEntry .1.3.6.1.4.1.14817.7.3.1.2.97 |
aprisaXEEthernetTableEntryIndividual Ethernet port settings. AprisaXEEthernetTableEntry .1.3.6.1.4.1.14817.7.3.1.2.97.1 |
aprisaXEEthernetPortNumThe port number, there are four ports on the hub.ro AprisaXEEthernetPortNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.97.1.1 |
aprisaXEEthernetGroupThe Ethernet Group of which this port is a member.rw AprisaXEEthernetGroup (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.97.1.2 |
aprisaXEEthernetIngressRateThe ingress frame rate limit for this port.rw AprisaXEEthernetFrameRate (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.97.1.3 |
aprisaXEEthernetPortPriorityIndicates the bandwidth allocated to this port.rw AprisaXEEthernetPortPriority (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.97.1.4 |
aprisaXEEthernetVlanQosSettings OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.98 |
aprisaXEEthernetGroupingIndicates whether Ethernet grouping (VLANs) is enabled or disabled.rw AprisaXEEthernetGrouping (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.98.1 |
aprisaXEEthernetManagementGroupThe Ethernet Group for management.ro AprisaXEEthernetGroup (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.98.2 |
aprisaXEEthernetPrioQueueSchedulingIndicates Ethernet priority queue scheduling scheme (either strict or weighted).rw AprisaXEEthernetPrioQueueScheduling (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.98.3 |
aprisaXEEthernetPrioQueueMappingIndicates the IEEE 802.1 Ethernet priority queue mapping scheme (either standard or cisco).rw AprisaXEEthernetPrioQueueMapping (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.98.4 |
aprisaXEDefaultEthernetGroupingIndicates when Ethernet Grouping settings must be reset to default values.rw AprisaXEDefaultAction (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.98.5 |
aprisaXEDefaultEthernetQosIndicates when Ethernet Grouping settings must be reset to default values.rw AprisaXEDefaultAction (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.98.6 |
aprisaXEInterfaceTableTable used to monitor the current interface status. SEQUENCE OF AprisaXEInterfaceTableEntry .1.3.6.1.4.1.14817.7.3.1.2.100 |
aprisaXEInterfaceTableEntryInterface bandwidth and status. AprisaXEInterfaceTableEntry .1.3.6.1.4.1.14817.7.3.1.2.100.1 |
aprisaXEInterfaceIndexThe slot containing the interface card, slots 0 to
8 (AUX or A-H) inclusive may contain interface cards.ro AprisaXESlotNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.100.1.1 |
aprisaXEInterfaceTypeIndicates the type of interface card.ro AprisaXECardType (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.100.1.2 |
aprisaXEInterfaceAlarmStatusIndicates the current alarm status for the interface.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.100.1.3 |
aprisaXEInterfacePort1BandwidthIndicates the bandwidth allocated to port 1.ro Unsigned32 .1.3.6.1.4.1.14817.7.3.1.2.100.1.4 |
aprisaXEInterfacePort2BandwidthIndicates the bandwidth allocated to port 2.ro Unsigned32 .1.3.6.1.4.1.14817.7.3.1.2.100.1.5 |
aprisaXEInterfacePort3BandwidthIndicates the bandwidth allocated to port 3.ro Unsigned32 .1.3.6.1.4.1.14817.7.3.1.2.100.1.6 |
aprisaXEInterfacePort4BandwidthIndicates the bandwidth allocated to port 4.ro Unsigned32 .1.3.6.1.4.1.14817.7.3.1.2.100.1.7 |
aprisaXE4WirePortControlTableStatus and Control table for 4Wire. SEQUENCE OF AprisaXE4WirePortControlTableEntry .1.3.6.1.4.1.14817.7.3.1.2.110 |
aprisaXE4WirePortControlTableEntryEntries for 4wire table. AprisaXE4WirePortControlTableEntry .1.3.6.1.4.1.14817.7.3.1.2.110.1 |
aprisaXE4WireConnectionIDAssociated cross-connect Backplane Connection ID.rw AprisaXEConnectionID (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.110.1.1 |
aprisaXE4WireSlotIndexSlot index for 4wire Status Control table.ro AprisaXESlotNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.110.1.2 |
aprisaXE4WirePortIndexChannel index for 4 Wire Control Status table.ro AprisaXEPortNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.110.1.3 |
aprisaXE4WireLoopbackLoopback control on or off for channels.rw FourRFLoopback (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.110.1.4 |
aprisaXE4WireAdpcmCompressionADPCM compression 16, 24, 32, 64 kbps or none.rw AprisaXEAdpcmCompression (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.110.1.5 |
aprisaXE4WireRxGainRx gain +4 dB to -14 dB in 0.5 dB steps.rwobsolete AprisaXE4WRxGain (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.110.1.6 |
aprisaXE4WireTxGainTx gain +14 dB to -4 dB in half dB steps.rwobsolete AprisaXE4WTxGain (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.110.1.7 |
aprisaXE4WireEInvertControls E on each channel for NORMAL or INVERT polarity.rw AprisaXESignalState (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.110.1.8 |
aprisaXE4WireMInvertControls M on each channel for NORMAL or INVERT polarity.rw AprisaXESignalState (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.110.1.9 |
aprisaXE4WireSignallingEnables or disables E&M signalling for the port.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.110.1.10 |
aprisaXE4WireSignallingConnectionIDAssociated signalling cross-connect Backplane Connection ID.rw AprisaXEConnectionID (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.110.1.11 |
aprisaXE4WireInputLevelInput Level -14.0 dBr to +4.0 dBr in half dB steps.rw AprisaXE4WInputLevel (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.110.1.12 |
aprisaXE4WireOutputLevelOutput Level -14.0 dBr to +4.0 dBr in 0.5 dB steps.rw AprisaXE4WOutputLevel (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.110.1.13 |
aprisaXE4WireStatusControlTableOverall card control and status. SEQUENCE OF AprisaXE4WireStatusControlTableEntry .1.3.6.1.4.1.14817.7.3.1.2.121 |
aprisaXE4WireStatusControlTableEntryStatus control entries. AprisaXE4WireStatusControlTableEntry .1.3.6.1.4.1.14817.7.3.1.2.121.1 |
aprisaXE4WireStatusControlSlotIndexIndex for table.ro AprisaXESlotNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.121.1.1 |
aprisaXE4WirePcmLawSets A-law or u-law.rw AprisaXEPcmLaw (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.121.1.2 |
aprisaXEFXOPortControlTablePort Control table for FXO. SEQUENCE OF AprisaXEFXOPortControlTableEntry .1.3.6.1.4.1.14817.7.3.1.2.130 |
aprisaXEFXOPortControlTableEntryEntries for FXO table. AprisaXEFXOPortControlTableEntry .1.3.6.1.4.1.14817.7.3.1.2.130.1 |
aprisaXEFXOPortControlSlotIndexSlot index for FXO Control table.ro AprisaXESlotNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.130.1.1 |
aprisaXEFXOPortIndexPort index for FXO Control table.ro AprisaXEPortNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.130.1.2 |
aprisaXEFXOLoopbackLoopback control on or off for ports.rw FourRFLoopback (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.130.1.3 |
aprisaXEFXOAdpcmCompressionADPCM compression 16, 24, 32, 64 kbps or none.rw AprisaXEAdpcmCompression (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.130.1.4 |
aprisaXEFXORxGainRx gain -10 dB to 10 dB in 0.5 dB steps.rwobsolete Enumeration .1.3.6.1.4.1.14817.7.3.1.2.130.1.5 |
aprisaXEFXOTxGainTx gain -10 dB to 10 dB in half dB steps.rwobsolete Enumeration .1.3.6.1.4.1.14817.7.3.1.2.130.1.6 |
aprisaXEFXOConnectionIDAssociated cross-connect Backplane Connection ID.rw AprisaXEConnectionID (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.130.1.7 |
aprisaXEFXOSignallingConnectionIDAssociated signalling cross-connect Backplane Connection ID.rw AprisaXEConnectionID (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.130.1.8 |
aprisaXEFXOInputLevelInput Level -10.0 dBr to +1.0 dBr in half dB steps.rw AprisaXEFXOInputLevel (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.130.1.9 |
aprisaXEFXOOutputLevelOutput Level -10.0 dBr to +1.0 dBr in 0.5 dB steps.rw AprisaXEFXOOutputLevel (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.130.1.10 |
aprisaXEFXOControlTableControl table for FXO. SEQUENCE OF AprisaXEFXOControlTableEntry .1.3.6.1.4.1.14817.7.3.1.2.140 |
aprisaXEFXOControlTableEntryEntries for FXO table. AprisaXEFXOControlTableEntry .1.3.6.1.4.1.14817.7.3.1.2.140.1 |
aprisaXEFXOControlSlotIndexSlot index for FXO Control table.ro AprisaXESlotNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.140.1.1 |
aprisaXEFXOSPMBandwidthSet the spm detector bandwidth to 1.5%, 3.5%, 5.5% or 7.5%.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.140.1.2 |
aprisaXEFXOSPMFrequencySet the spm detector frequency to 12kHz or 16kHz.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.140.1.3 |
aprisaXEFXOSPMLevelSet the spm detector level 0 to 27 dB.rw AprisaXEFXSPMLevel (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.140.1.4 |
aprisaXEFXOCasModeSet the CAS mode to XE,SE or 4Wire compatible.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.140.1.5 |
aprisaXEFXOCasSignalSet the CAS signal to normal or invert.rwobsolete AprisaXESignalState (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.140.1.6 |
aprisaXEFXOPCMLawSet the PCM law to A-law or u-law.rw AprisaXEPcmLaw (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.140.1.7 |
aprisaXEFXOOnHookSpeedSet the on hook speed to fast, medium or slow.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.140.1.8 |
aprisaXEFXORingerImpedanceSet the ringer impedance to high or synthesized.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.140.1.9 |
aprisaXEFXORingerThresholdSet the ringer threshold to low, medium or high.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.140.1.10 |
aprisaXEFXOLoopCurrentLimitSet the loop current limiter to off or on.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.140.1.11 |
aprisaXEFXOMinLoopCurrentSet the min loop current to low, medium or high.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.140.1.12 |
aprisaXEFXOTipRingVoltageSet the tip ring voltage to low, medium or high.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.140.1.13 |
aprisaXEFXOLineImpedanceSet the line impedance to 600 Ohms, 900 Ohms,
600 Ohms + 2.16 uF, 900 Ohms + 2.16 uF,
TN12 - 220 Ohms + (820 Ohms || 120 nF),
TBR21 - 270 Ohms + (750 Ohms || 150 nF),
BT3 - 370 Ohms + (620 Ohms || 310 nF),
BT Network - 320 Ohms + (1050 Ohms || 210 nF),
China - 200 Ohms + (680 Ohms || 100 nF)rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.140.1.14 |
aprisaXEFXOLineReversalSet the line reversal on/off.rwobsolete Enumeration .1.3.6.1.4.1.14817.7.3.1.2.140.1.15 |
aprisaXEFXOABitFaultSet the CAS A fault bit to
Transparent Normal, Transparent Inverted,
Forced Normal or Forced Inverted.rw AprisaXE2WireSignalState (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.140.1.16 |
aprisaXEFXOBBitRingSet the CAS B ring bit to
Transparent Normal, Transparent Inverted,
Forced Normal or Forced Inverted.rw AprisaXE2WireSignalState (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.140.1.17 |
aprisaXEFXOCBitBillingSet the CAS C billing bit to
Transparent Normal, Transparent Inverted,
Forced Normal or Forced Inverted.rw AprisaXE2WireSignalState (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.140.1.18 |
aprisaXEFXODBitReversalsSet the CAS D reversals bit to
Transparent Normal, Transparent Inverted,
Forced Normal or Forced Inverted.rw AprisaXE2WireSignalState (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.140.1.19 |
aprisaXEFXOEchoCancellerSet the echo canceller to off, on or auto. The
reserved values are for internal use only and
cannot be set via SNMP.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.140.1.20 |
aprisaXEFXOABitOffHookSet the CAS A off hook bit to
Transparent Normal, Transparent Inverted,
Forced Normal or Forced Inverted.rw AprisaXE2WireSignalState (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.140.1.21 |
aprisaXEBackplaneConnectionTableTable of AprisaXE Cross connections. SEQUENCE OF AprisaXEBackplaneConnectionTableEntry .1.3.6.1.4.1.14817.7.3.1.2.150 |
aprisaXEBackplaneConnectionTableEntryTable entries define a circuit carried ove a TDM bus. AprisaXEBackplaneConnectionTableEntry .1.3.6.1.4.1.14817.7.3.1.2.150.1 |
aprisaXEBackplaneConnectionIDHandle to associate circuits with backplane connections.rw AprisaXEConnectionID (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.150.1.1 |
aprisaXEBackplaneTdmBusTDM Bus to switch: busA - busD.rw AprisaXETdmBus (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.150.1.2 |
aprisaXEBackplaneStartBitPosStart bit position on the associated TDM bus (0 - 2047).rw INTEGER .1.3.6.1.4.1.14817.7.3.1.2.150.1.3 |
aprisaXEBackplaneLengthNumber of bits to place on the backplane TDM bus (0 - 2047).rw INTEGER .1.3.6.1.4.1.14817.7.3.1.2.150.1.4 |
aprisaXEBackplaneInterfaceThe type of circuit this backplane connection is carrying.rw AprisaXEInterfaceCnxnType (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.150.1.5 |
aprisaXEAggregateConnectionTableTable of Aggregated backplane connections used for
interfaces with further cross-connection capability. SEQUENCE OF AprisaXEAggregateConnectionTableEntry .1.3.6.1.4.1.14817.7.3.1.2.160 |
aprisaXEAggregateConnectionTableEntry AprisaXEAggregateConnectionTableEntry .1.3.6.1.4.1.14817.7.3.1.2.160.1 |
aprisaXEAggregateBackplaneIDBackplane Connection identifier.ro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.160.1.1 |
aprisaXEAggregateInterfaceIDro Integer32 .1.3.6.1.4.1.14817.7.3.1.2.160.1.2 |
aprisaXEAggregateStartBitPosStart bit position of the data coming into the
cross-connection device (SWITI) for this interface connection.ro INTEGER .1.3.6.1.4.1.14817.7.3.1.2.160.1.3 |
aprisaXEAggregateLengthNumber of bits required for this interface connection.ro INTEGER .1.3.6.1.4.1.14817.7.3.1.2.160.1.4 |
aprisaXEAggregateOffsetOffset into the aggregate connection where this
interface connection is placed.ro INTEGER .1.3.6.1.4.1.14817.7.3.1.2.160.1.5 |
aprisaXEAggregateE1PortPort number associated with this connection.ro AprisaXEPortNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.160.1.6 |
aprisaXEAggregateControl OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.170 |
aprisaXEAggregateControlBackplaneIDThe backplane ID to add or delete.rw INTEGER .1.3.6.1.4.1.14817.7.3.1.2.170.1 |
aprisaXEAggregateControlInterfaceIDAggregate connection identifier.rw INTEGER .1.3.6.1.4.1.14817.7.3.1.2.170.2 |
aprisaXEAggregateControlStartBitPosStart bit position of the data coming into the
cross-connection device (SWITI) for this interface connection.rw INTEGER .1.3.6.1.4.1.14817.7.3.1.2.170.3 |
aprisaXEAggregateControlLengthNumber of bits required for this interface connection.rw INTEGER .1.3.6.1.4.1.14817.7.3.1.2.170.4 |
aprisaXEAggregateControlOffsetOffset into the aggregate connection where this
interface connection is placed.rw INTEGER .1.3.6.1.4.1.14817.7.3.1.2.170.5 |
aprisaXEAggregateControlCommandCommand to send to act upon the rows in the Aggregate
Connection table.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.170.6 |
aprisaXEBackplaneControl OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.180 |
aprisaXEBackplaneControlConnectionIDThe Backplane Connection ID to add or delete.rw AprisaXEConnectionID (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.180.1 |
aprisaXEBackplaneControlTdmBusTDM Bus to switch: busA - busD.rw AprisaXETdmBus (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.180.2 |
aprisaXEBackplaneControlStartBitPosStart bit position on the associated TDM bus (0 - 2047).rw INTEGER .1.3.6.1.4.1.14817.7.3.1.2.180.3 |
aprisaXEBackplaneControlLengthNumber of bits to place on the backplane TDM bus (0 - 2048).rw INTEGER .1.3.6.1.4.1.14817.7.3.1.2.180.4 |
aprisaXEBackplaneControlInterfaceThe type of circuit this backplane connection is carrying.rw AprisaXEInterfaceCnxnType (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.180.5 |
aprisaXEBackplaneControlCommandCommand to send to act upon rows in the Backplane
Connection table.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.180.6 |
aprisaXEFXSPortControlTablePort Control table for FXS. SEQUENCE OF AprisaXEFXSPortControlTableEntry .1.3.6.1.4.1.14817.7.3.1.2.190 |
aprisaXEFXSPortControlTableEntryEntries for FXS table. AprisaXEFXSPortControlTableEntry .1.3.6.1.4.1.14817.7.3.1.2.190.1 |
aprisaXEFXSPortControlSlotIndexSlot index for FXS Control table.ro AprisaXESlotNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.190.1.1 |
aprisaXEFXSPortIndexPort index for FXS Control table.ro AprisaXEPortNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.190.1.2 |
aprisaXEFXSLoopbackLoopback control on or off for ports.rw FourRFLoopback (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.190.1.3 |
aprisaXEFXSAdpcmCompressionADPCM compression 16, 24, 32, 64 kbps or none.rw AprisaXEAdpcmCompression (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.190.1.4 |
aprisaXEFXSRxGainRx gain -9.5 dB to +3 dB in 0.5 dB steps.rwobsolete Enumeration .1.3.6.1.4.1.14817.7.3.1.2.190.1.5 |
aprisaXEFXSTxGainTx gain -3 dB to 9.5 dB in 0.5 dB steps.rwobsolete Enumeration .1.3.6.1.4.1.14817.7.3.1.2.190.1.6 |
aprisaXEFXSConnectionIDAssociated cross-connect Backplane Connection ID.rw AprisaXEConnectionID (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.190.1.7 |
aprisaXEFXSSignallingConnectionIDAssociated signalling cross-connect Backplane Connection ID.rw AprisaXEConnectionID (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.190.1.8 |
aprisaXEFXSInputLevelInput Level -9.0 dBr to +3.0 dBr in half dB steps.rw AprisaXEFXSInputLevel (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.190.1.9 |
aprisaXEFXSOutputLevelOutput Level -9.5 dBr to +2.5 dBr in 0.5 dB steps.rw AprisaXEFXSOutputLevel (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.190.1.10 |
aprisaXEFXSPathMuteApplies DFXS Mute Function - No Mute, Mute Rx or Mute Tx.rw AprisaXEFXSPathMute (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.190.1.11 |
aprisaXEFXSControlTableControl table for FXS. SEQUENCE OF AprisaXEFXSControlTableEntry .1.3.6.1.4.1.14817.7.3.1.2.195 |
aprisaXEFXSControlTableEntryEntries for FXS table. AprisaXEFXSControlTableEntry .1.3.6.1.4.1.14817.7.3.1.2.195.1 |
aprisaXEFXSControlSlotIndexSlot index for FXS Control table.ro AprisaXESlotNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.195.1.1 |
aprisaXEFXSPCMLawSet the PCM law to A-law or u-law.rw AprisaXEPcmLaw (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.195.1.2 |
aprisaXEFXSEchoCancellerSet the echo canceller to on or off.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.195.1.3 |
aprisaXEFXSBillingToneFrequencySet the billing tone generator frequency to 12kHz or 16kHz.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.195.1.4 |
aprisaXEFXSBillingToneAmplitudeSet the billing tone generator amplitude to 400mV, 300mV,
250mV, 200mV, 150mV, 100mV or 50mV. Note, that software
release 7.3.x only supports 400mV, 300mV, 200mV and 100mV.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.195.1.5 |
aprisaXEFXSBillingToneDecaySet the billing tone generator attack decay ramp
to 0.2ms, 0.5ms, 1ms, 2ms, 5ms, 10ms or 20ms.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.195.1.6 |
aprisaXEFXSRingerFrequencySet the ringer frequency to 17Hz, 25Hz or 50Hz.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.195.1.7 |
aprisaXEFXSRingerAmplitudeSet the ringer amplitude to 40 V RMS, 45 V RMS,
50 V RMS, 55 V RMS or 60 V RMS.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.195.1.8 |
aprisaXEFXSLineImpedanceSet the subscriber line impedance to 600 Ohms, 900 Ohms,
600 Ohms + 2.16 uF, 900 Ohms + 2.16 uF,
TN12 - 220 Ohms + (820 Ohms || 120 nF),
TBR21 - 270 Ohms + (750 Ohms || 150 nF),
BT3 - 370 Ohms + (620 Ohms || 310 nF)rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.195.1.9 |
aprisaXEFXSCasModeSet the CAS mode to XE,SE or 4Wire compatible.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.195.1.10 |
aprisaXEFXSCasSignalSet the CAS signal to normal or invert.rwobsolete AprisaXESignalState (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.195.1.11 |
aprisaXEFXSTransHybridBalanceSet the trans hybrid balance to 4.08dB, 2.5dB,
1.16dB, 0dB, -1.02dB, -1.94dB, -2.77dB, Offrw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.195.1.12 |
aprisaXEFXSLineReversalSet the line reversal on/off.rwobsolete Enumeration .1.3.6.1.4.1.14817.7.3.1.2.195.1.13 |
aprisaXEFXSCalibrateRecalibrate the card yes/no.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.195.1.14 |
aprisaXEFXSABitFaultSet the CAS A fault bit to
Transparent Normal, Transparent Inverted,
Forced Normal or Forced Inverted.rw AprisaXE2WireSignalState (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.195.1.15 |
aprisaXEFXSBBitRingSet the CAS B ring bit to
Transparent Normal, Transparent Inverted,
Forced Normal or Forced Inverted.rw AprisaXE2WireSignalState (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.195.1.16 |
aprisaXEFXSCBitBillingSet the CAS C billing bit to
Transparent Normal, Transparent Inverted,
Forced Normal or Forced Inverted.rw AprisaXE2WireSignalState (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.195.1.17 |
aprisaXEFXSDBitReversalsSet the CAS D reversals bit to
Transparent Normal, Transparent Inverted,
Forced Normal or Forced Inverted.rw AprisaXE2WireSignalState (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.195.1.18 |
aprisaXEFXSLoopParametersSet the loop parameters to 'default' or 'Telkom SA Limited'.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.195.1.19 |
aprisaXEFXSABitOffHookSet the CAS A off hook bit to
Transparent Normal, Transparent Inverted,
Forced Normal or Forced Inverted.rw AprisaXE2WireSignalState (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.195.1.20 |
aprisaXECrossConnectControl OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.200 |
aprisaXECrossConnectControlCommandCommand to send to delete all current cross-connections or
to activate a new set of cross-connections.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.200.1 |
aprisaXEMotherboardExtendedModeCapableAllows the cross connect application to determine whether
to stripe cross connections or not.ro Enumeration .1.3.6.1.4.1.14817.7.3.1.2.200.2 |
aprisaXEEthernetActivationStatusEthernet activation status i.e activated, failed or
currently busy activating.ro AprisaXECCActivationStatus (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.200.3 |
aprisaXECCActivationStatusTableCC Activation status table. SEQUENCE OF AprisaXECCActivationStatusTableEntry .1.3.6.1.4.1.14817.7.3.1.2.202 |
aprisaXECCActivationStatusTableEntryEntries for CC Activation status table. AprisaXECCActivationStatusTableEntry .1.3.6.1.4.1.14817.7.3.1.2.202.1 |
aprisaXECCActivationStatusSlotIndexSlot index for CC Activation Status table.ro AprisaXESlotNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.202.1.1 |
aprisaXECCActivationStatusCross-connect activation status i.e activated, failed or
currently busy activating.ro AprisaXECCActivationStatus (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.202.1.2 |
aprisaXEHSSControlTableControl table for HSS. SEQUENCE OF AprisaXEHSSControlTableEntry .1.3.6.1.4.1.14817.7.3.1.2.207 |
aprisaXEHSSControlTableEntryEntries for HSS table. AprisaXEHSSControlTableEntry .1.3.6.1.4.1.14817.7.3.1.2.207.1 |
aprisaXEHSSControlSlotIndexSlot index for HSS Control Table.ro AprisaXESlotNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.207.1.1 |
aprisaXEHSSConnectionIDBackplane Connection ID for data connection.rw AprisaXEConnectionID (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.207.1.2 |
aprisaXEHSSSignallingIDBackplane connection ID for signalling/control connection.rw AprisaXEConnectionID (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.207.1.3 |
aprisaXEHSSEquipmentModeTerminal Equipment mode, DCE or DTE, this is a direct reflection
of the equipment mode based on the type of cable currently
connected. The value is not defined if no cable is attached.ro AprisaXESerialEquipmentMode (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.207.1.4 |
aprisaXEHSSLoopbackInterface loopback control.rw FourRFLoopback (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.207.1.5 |
aprisaXEHSSNetworkClockSourceControls whether the port drive the clock source or not.rw FourRFNetworkClockSelect (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.207.1.6 |
aprisaXEHSSSerialBaudRateSerial Baud rate where 1 = 8kbps and 256 = 2Mbps.rw INTEGER .1.3.6.1.4.1.14817.7.3.1.2.207.1.7 |
aprisaXEHSSV110BaudRateV110 baud rate.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.207.1.8 |
aprisaXEHSSSendHandshakingModeSelect 1 of 8 RTS/CTS modes of operation.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.207.1.9 |
aprisaXEHSSDataReadyModeSelect 1 of 8 DSR/DTR modes.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.207.1.10 |
aprisaXEHSSCarrierDetectModeSelect 1 of 4 DCD modes.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.207.1.11 |
aprisaXEHSSClockSelectionSelect the clock mode internal to the HSS traffic path.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.207.1.12 |
aprisaXEHSSXTxCEnabledSelect whether XTxC generation is enabled or disabled for
the port. The default is enabled.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.207.1.13 |
aprisaXEHSSSerialModeIndicates the type of serial interface cable is connected to
the HSS port.ro AprisaXEHssSerialMode (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.207.1.14 |
aprisaXEV24PortControlTablePort Control table for V24. SEQUENCE OF AprisaXEV24PortControlTableEntry .1.3.6.1.4.1.14817.7.3.1.2.210 |
aprisaXEV24PortControlTableEntryEntries for V24 table. AprisaXEV24PortControlTableEntry .1.3.6.1.4.1.14817.7.3.1.2.210.1 |
aprisaXEV24PortControlSlotIndexSlot index for V24 Control table.ro AprisaXESlotNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.210.1.1 |
aprisaXEV24PortIndexPort index for V24 Control table.ro AprisaXEPortNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.210.1.2 |
aprisaXEV24BaudRateBaud Rate from 300 baud to 115200 baud.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.210.1.3 |
aprisaXEV24LoopbackLoopback control on or off for ports.rw FourRFLoopback (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.210.1.4 |
aprisaXEV24DataBitsNo of data bits used, 7 or 8.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.210.1.5 |
aprisaXEV24StopBitsNo of stop bits used, 1 or 2.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.210.1.6 |
aprisaXEV24ParityBitsNo of parity bits used, 0 or 1.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.210.1.7 |
aprisaXEV24ConnectionIDAssociated cross-connect Backplane Connection ID.rw AprisaXEConnectionID (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.210.1.8 |
aprisaXEDualJetBoardTableTable of Dual E1 card specific configuration details. SEQUENCE OF AprisaXEDualJetBoardEntry .1.3.6.1.4.1.14817.7.3.1.2.220 |
aprisaXEDualJetBoardEntryDual E1 configuration details. AprisaXEDualJetBoardEntry .1.3.6.1.4.1.14817.7.3.1.2.220.1 |
aprisaXEDualJetBoardTableIndexDual E1 board indexed by slot.ro AprisaXESlotNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.220.1.1 |
aprisaXEDualJetPortTableTable based on slot and port of DualJet cards alarms. SEQUENCE OF AprisaXEDualJetPortEntry .1.3.6.1.4.1.14817.7.3.1.2.221 |
aprisaXEDualJetPortEntryDual E1 port alarms. AprisaXEDualJetPortEntry .1.3.6.1.4.1.14817.7.3.1.2.221.1 |
aprisaXEDualJetPortTableSlotPort table index based on slot number.ro AprisaXESlotNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.221.1.1 |
aprisaXEDualJetPortTablePortPort table index based on port number.ro AprisaXEPortNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.221.1.2 |
aprisaXEDualJetAISAlarmStatusAIS alarm status.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.221.1.3 |
aprisaXEDualJetAISAlarmSeverityAIS alarm severity.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.221.1.4 |
aprisaXEDualJetAISAlarmEnabledAIS alarm enabled or disabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.221.1.5 |
aprisaXEDualJetLOSAlarmStatusLOS alarm status.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.221.1.6 |
aprisaXEDualJetLOSAlarmSeverityLOS alarm severity.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.221.1.7 |
aprisaXEDualJetLOSAlarmEnabledLOS alarm enabled or disabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.221.1.8 |
aprisaXEDualJetIFConfigTableSwitch data table which describes the
allocation of user data on to the TDM busses. SEQUENCE OF AprisaXEDualJetIFConfigEntry .1.3.6.1.4.1.14817.7.3.1.2.222 |
aprisaXEDualJetIFConfigEntryDual JET config data. AprisaXEDualJetIFConfigEntry .1.3.6.1.4.1.14817.7.3.1.2.222.1 |
aprisaXEDualJetIFConfigSlotIndexIndex to the port table based on port number.ro AprisaXESlotNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.222.1.1 |
aprisaXEDualJetIFConfigPortIndexIndex to the port table based on port number.ro AprisaXEPortNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.222.1.2 |
aprisaXEDualJetTrafficTypeControls the traffic type on a Dual JET port.rw AprisaXEQuadJetTrafficType (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.222.1.3 |
aprisaXEDualJetLoopbackControls the traffic loopback on a Dual JET port.rwobsolete FourRFLoopback (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.222.1.4 |
aprisaXEDualJetLineEncodingControls the line encoding, the default is
HDB3 for E1, B8ZS for T1.rw AprisaXEQuadJetLineEncoding (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.222.1.5 |
aprisaXEDualJetPcmModeControls the PCM mode, PCM31 or PCM30C.rw AprisaXEPcmMode (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.222.1.6 |
aprisaXEDualJetClockSourceControls whether the port drives the clock soure or not.rw FourRFNetworkClockSelect (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.222.1.7 |
aprisaXEDualJetLineRadioLoopbackThis indicates the E1 loopback setting on a port;
OFF, Line or Radio Facing.rw AprisaXEQuadJetLoopbacks (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.222.1.8 |
aprisaXEDualJetTxWaveFormShaperThis indicates the T1 Tx Waveform Shaper for a port;
0~133 ft, 133~266 ft, 266~399 ft, 399~533 ft, 533~655 ft.rw AprisaXEQuadJetWaveFormShapers (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.222.1.9 |
aprisaXESingleJetBoardTableTable of Single E1 card specific configuration details. SEQUENCE OF AprisaXESingleJetBoardEntry .1.3.6.1.4.1.14817.7.3.1.2.225 |
aprisaXESingleJetBoardEntrySingle E1 configuration details. AprisaXESingleJetBoardEntry .1.3.6.1.4.1.14817.7.3.1.2.225.1 |
aprisaXESingleJetBoardTableIndexSingle E1 board indexed by slot.ro AprisaXESlotNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.225.1.1 |
aprisaXESingleJetPortTableTable based on slot and port of SingleJet cards alarms. SEQUENCE OF AprisaXESingleJetPortEntry .1.3.6.1.4.1.14817.7.3.1.2.226 |
aprisaXESingleJetPortEntrySingle E1 port alarms. AprisaXESingleJetPortEntry .1.3.6.1.4.1.14817.7.3.1.2.226.1 |
aprisaXESingleJetPortTableSlotPort table index based on slot number.ro AprisaXESlotNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.226.1.1 |
aprisaXESingleJetPortTablePortPort table index based on port number.ro AprisaXEPortNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.226.1.2 |
aprisaXESingleJetAISAlarmStatusAIS alarm status.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.226.1.3 |
aprisaXESingleJetAISAlarmSeverityAIS alarm severity.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.226.1.4 |
aprisaXESingleJetAISAlarmEnabledAIS alarm enabled or disabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.226.1.5 |
aprisaXESingleJetLOSAlarmStatusLOS alarm status.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.226.1.6 |
aprisaXESingleJetLOSAlarmSeverityLOS alarm severity.ro FourRFAlarmSeverity (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.226.1.7 |
aprisaXESingleJetLOSAlarmEnabledLOS alarm enabled or disabled.ro FourRFAlarmEnabled (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.226.1.8 |
aprisaXESingleJetIFConfigTableSwitch data table which describes the
allocation of user data on to the TDM busses. SEQUENCE OF AprisaXESingleJetIFConfigEntry .1.3.6.1.4.1.14817.7.3.1.2.227 |
aprisaXESingleJetIFConfigEntrySingle JET config data. AprisaXESingleJetIFConfigEntry .1.3.6.1.4.1.14817.7.3.1.2.227.1 |
aprisaXESingleJetIFConfigSlotIndexIndex to the port table based on port number.ro AprisaXESlotNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.227.1.1 |
aprisaXESingleJetIFConfigPortIndexIndex to the port table based on port number.ro AprisaXEPortNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.227.1.2 |
aprisaXESingleJetTrafficTypeControls the traffic type on a Single JET port.rw AprisaXEQuadJetTrafficType (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.227.1.3 |
aprisaXESingleJetLoopbackControls the traffic loopback on a Single JET port.rwobsolete FourRFLoopback (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.227.1.4 |
aprisaXESingleJetLineEncodingControls the line encoding, the default is
HDB3 for E1, B8ZS for T1.rw AprisaXEQuadJetLineEncoding (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.227.1.5 |
aprisaXESingleJetPcmModeControls the PCM mode, PCM31 or PCM30C.rw AprisaXEPcmMode (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.227.1.6 |
aprisaXESingleJetClockSourceControls whether the port drives the clock soure or not.rw FourRFNetworkClockSelect (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.227.1.7 |
aprisaXESingleJetLineRadioLoopbackThis indicates the E1 loopback setting on a port;
OFF, Line or Radio Facing.rw AprisaXEQuadJetLoopbacks (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.227.1.8 |
aprisaXESingleJetTxWaveFormShaperThis indicates the T1 Tx Waveform Shaper for a port;
0~133 ft, 133~266 ft, 266~399 ft, 399~533 ft, 533~655 ft.rw AprisaXEQuadJetWaveFormShapers (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.227.1.9 |
aprisaXEPSCControlTableControl table for PSC. SEQUENCE OF AprisaXEPSCControlTableEntry .1.3.6.1.4.1.14817.7.3.1.2.230 |
aprisaXEPSCControlTableEntryEntries for PSC table. AprisaXEPSCControlTableEntry .1.3.6.1.4.1.14817.7.3.1.2.230.1 |
aprisaXEPSCControlSlotIndexSlot index for PSC Control Table.ro AprisaXESlotNumber (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.230.1.1 |
aprisaXEPSCActiveRadioIndicates the reception mode of the PSC.rw AprisaXEPSCActiveRadio (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.230.1.2 |
aprisaXEPSCActiveTxIndicates the currently active transmitter.ro AprisaXEPSCActiveTx (APRISAXE-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.230.1.3 |
aprisaXEPSCDemodAlignmentStatusPSCStatus of the demodulator alignment on the PSC.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.230.1.4 |
aprisaXEPSCDemodAlignmentStatusPICStatus of the demodulator alignment on the PIC.ro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.230.1.5 |
aprisaXEHSDParameterCompare OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.235 |
aprisaXEHSDParameterMismatchIf there is a parameter (OID) mismatch between
Radio A and Radio Bro FourRFAlarmStatus (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.235.1 |
aprisaXEHSDParameterCompareCheckingEnables/disables HSD paramter compare checking between
Radio A and Radio Brw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.235.2 |
aprisaXESoftwareUpgradeControl OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.2.300 |
aprisaXESoftwareUpgradeVersionNew software version details of the form x_y_z.rw DisplayString ( SIZE .1.3.6.1.4.1.14817.7.3.1.2.300.1 |
aprisaXESoftwareUpgradeCommandCommand used to instigate a software upgrade.rw Enumeration .1.3.6.1.4.1.14817.7.3.1.2.300.2 |
aprisaXESoftwareUpgradeResultStatus of a software upgrade, this will have to be polled to
follow the upload progress.ro FourRFProcessResultType (COMMON-TC-4RF) .1.3.6.1.4.1.14817.7.3.1.2.300.3 |
aprisaXEEventsThe root of the OID sub-tree for the AprisaXE product events. OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.3 |
aprisaXEEventsV2The AprisaXE product events, ensures SNMPv1 compatibility. OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.3.0 |
aprisaXETestObjectsThe root of the OID sub-tree for the AprisaXE test objects. OBJECT IDENTIFIER .1.3.6.1.4.1.14817.7.3.1.4 |